Add mutex per nvme_bdev_ctrlr and replace g_bdev_nvme_mutex by it
for possible cases. These are just drop-in-replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib1d5eebd65e514cfe96ad60a9004d9bace7b4f6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6693
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make us easier to maintain the operation to delete
nvme_bdev_ctrlr and its trids. The added unit test cases guard us
from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I400d4092020e89bacaebc7be045a456b8760ed8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6688
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
By adding the second parameter, hotplug, factor out the common part
of remove_cb() and bdev_nvme_delete() into a helper function
_bdev_nvme_delete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5becbc7a7a94e852510e6a2745afb9c533d21713
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6692
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ctrlr is valid while populating namespaces of the
nvme_bdev_ctrlr regardless of the result. nvme_bdev_ns holds
nvme_bdev_ctrlr by its pointer, ctrlr. Hence it is not necessary for
nvme_ctrlr_populate_namespaces_done() to use nvme_bdev_ctrlr_get_by_name()
to get nvme_bdev_ctrlr.
To simplify the code, add nvme_bdev_ctrlr parameter to
nvme_ctrlr_populate_namespaces_done() and remove the
nvme_bdev_ctrlr_get_by_name() call from nvme_ctrlr_populate_namespaces_done().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic2013842fad16ea0de49c18b5b853d147c23a6b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6621
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_no_pi_readv() had not been used for bdev_nvme_no_pi_readv() yet.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bf815b36ef0daa2f1248f618a9c7e2f1ea62346
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6603
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In nvme_bdev_ctrlr_create, calloc will be called with a zero size
allocation request if the number of namespaces is zero. The behaviour
is implementation defined if the size of the space requested is zero -
calloc will either return a pointer that mustn't be dereferenced, or
NULL. If NULL is returned, the nvme_bdev_ctrlr_create will fail.
Only call calloc if there are a non-zero number of namespaces.
Otherwise, leave the namespaces pointer with a NULL value. All
references to namespaces[] are either known to be safe, or occur
in the context of looping through the namespaces which will be
skipped if the count is zero. The exception to this is in
vbdev_opal_create, where an assert has been added to match
equivalent code in bdev_ocssd_create_bdev.
Tested by running unit tests on a system that returns a null pointer
for a zero size allocation.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I058b0683fd9b3a20bf90e54db93ca48b9bb4e40e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When multipath is supported, nvme_bdev will be got via bdev_subsystem.
To make such change transparent, add a helper function
nvme_bdev_ns_to_bdev() and use it for some cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5ad0b87178bc739ba0a75789f9f26b860241a04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5801
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By the recent changes, the linked list nvme_ns->bdevs has only a
single bdev at the maximum. Hence replace it by the pointer
nvme_ns->bdev, and remove the linked list pointer nvme_bdev->tailq.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib976e15bb128ba8479070b58e5f4c43fb9dcf479
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6230
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By the last changes, not only standard namespace but also ocssd
namespace has only one nvme_bdev, and standard namespace processes
only the head of nvme_ns->bdevs.
This patch changes the common and standard namespace specific
part to process only the head of nvme_ns->bdevs.
The following patch will replace the linked list nvme_ns->bdevs
by the pointer nvme_ns->bdev.
Add a particular error case that nvme_bdev is failed to create even
if ctrlr has one namespace. If ctrlr has one namespace but the
corresponding bdev is failed to create, nvme_ns->populated should
be false and hence nvme_ns->bdevs should not be accessed. However
the code had not assumed such case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5495882fad8c8a012305177179a46d4373ba75f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5800
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Function bdev_nvme_create accpets new parameter - ctrlr
opts which is passed and filled by RPC handler. That
will allow us to add config parameters for other ctrlr
options with minimal changes.
Change-Id: I96ac1b21e7a3816c652765cddade75423eb843ca
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6023
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Track whether we attached a controller while
polling the probe ctx. If we didn't when the probe
ctx is done, then it means the controller failed to
attach and we need to free the ctx.
Fixes issue #1723.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia7f040a073e4c824c29c0ed493f8391b69f94174
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5818
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When multipath is supported, nvme_bdev_ns will be got via bdev_subsystem.
To make such change invisible, add a helper function
nvme_bdev_to_bdev_ns() and use it in bdev_nvme_io_type_supported()
and bdev_nvme_dump_info_json().
Inline the function and locate it in common.h to use for ocssd_bdev
too.
ctrlr can be got from ns using spdk_nvme_ns_get_ctrlr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If85c86737e8194b8e34ed62df04a3968443f23bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5795
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fctor out getting nvme_ns and qpair pointers in _bdev_nvme_submit_request()
into a helper function bdev_nvme_find_io_path().
bdev_nvme_find_io_path() will be used for ocssd_bdev, and hence
locate it in common.h, inline it because it is used in I/O paths.
ocssd_bdev needs not spdk_nvme_ns but nvme_bdev_ns pointer in I/O paths,
and bdev_nvme_find_io_path() returns nvme_bdev_ns.
Besides, move inclusion of likely.h from bdev_nvme.c and bdev_ocssd.c
to common.h.
The next patch will apply bdev_nvme_find_io_path to ocssd_bdev.
By the following patches, bdev_nvme_find_io_path() will take ANA
state into consideration.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3817c9f56606021ebea90fdfbcf0656df9faba82
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5528
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we do detect new devices, we would like to get them
attached as quickly as possible. Controller initialization
requires a non-trivial number of admin commands, and when
using async probe, it means that after we have detected
a new device, it will take many iterations of calling
spdk_nvme_probe_poll_async() before the controller is
fully attached.
So when we are actively probing a probe_ctx, create
a new poller that is solely responsible for probing
that context at a much higher frequency.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I72fbe3faef2d72608edb163bd87907902d7c3adc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5646
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Object structure will be different after introducing subsystem.
Let's inline nvme_bdev_attach_bdev_to_ns() and
nvme_bdev_detach_bdev_from_ns() as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I93fd43db231780b9e86ebaec1a9fb40f8511dab9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5756
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Factor out the common operation of nvme_ctrlr_depopulate_namespace_done()
and nvme_bdev_attach_bdev_to_ns() into a helper function nvme_bdev_ns_detach().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8efa8bc2c2d455d0fd9e0865ff85fd265d14ee06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5613
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate reference count of nvme_bdev_ctrlr between nvme_bdev_ctrlr
and nvme_bdev_ns.
Set ctrlr->ref to 1 when creating ctrlr, increment ctrlr->ref when
populating ns, decrement ctrlr->ref when destructing ctrlr or
when ns->ref becomes 0, and destruct ctrlr actually when ctrlr->ref is 0.
Set ns->ref to 1 when populating ns, increment ns->ref when
adding bdev to ns, decrement ns->ref when depopulating ns or removing
bdev from ns, and decrement ns->ctrlr->ref when ns->ref becomes 0.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7810384d97a174d8f55d316e5cdf2a9ef4a11432
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5608
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For further simplification, merge decrementing reference count of
nvme_bdev_ctrlr into nvme_bdev_ctrlr_destruct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I604039c3f38a60b316ae465d4649e9eb11bfb6cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5573
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
destruct_poller had been used to destruct ctrlr after completing reset, but
we can remove destruct_poller and change reset processing to destruct ctrlr
after its completion by itself.
spdk_io_device_unregister() may fail spdk_for_each_channel(). Hence call
nvme_bdev_ctrlr_do_destruct() as the completion function of spdk_for_each_channel().
The first idea was to always run destruct_poller at nvme_bdev_ctrlr_destruct(),
but this patch will be simpler and more intuitive.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I43a400bdb67ab015d707fb9679693bd3d5bfb070
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5607
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
The following patches will need to update nvme_bdev_ns at
nvme_ctrlr_depopulate_namespace_done(). nvme_bdev_ctrlr can be
got from nvme_bdev_ns, and so this change will cause no issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7cbfe0d936a3a757a8792fdf842e1228b2df05e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4531
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Move nvme_bdev_attach_bdev_to_ns() into nvme_bdev_create() and
change the return type of nvme_bdev_create() to int.
These refactorings are necessary to share a single nvme_bdev among
multiple nvme_bdev_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I81c702bfec15f14c6b4a6588d1d3dfa28a9e3e6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5650
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will make us a little easier to understand nvme_bdev and clarify
the difference between nvme_bdev and ocssd_bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6e93bcc315612ec88c452cf9ae87a3db8ec7855
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5649
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation for the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20f7b03e15fe8cc74b22ff46040a4eba9cc63231
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5648
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We do not know if reconnecting I/O qpair succeeded or failed now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I030c3d8553efac7878da0fe358a624a502dd8656
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5699
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new variable is_failed to struct nvme_bdev_ctrlr_trid, and
set it to true when starting failover or when failover failed, or
set it to false when initializing or failover succeeded.
Then add an new failover trid before all failed trids.
The test log showed that many failover failed because new trid was
added after failed trids.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I220839245c6414b5d3ef69a2fa1b97904d88d8bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5698
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We do not know failover is attempted from which path to which path.
Get these information by NOTICELOG.
Failover or reset is serialized by the flag ctrlr->resetting and
ctrlr->failover_in_progress.
Hence it is enough to add such information only to start.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I97400c048b39dc1b70e6aeb71643b5ed1ca23e72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5695
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
bdev_nvme_submit_request() calls bdev_nvme_get_buf_cb() directly
when the buffer is already allocated. This is for performance improvement
but will be helpful for the upcoming multipath feature to retry
read I/O submission because buffer should be allocated only once.
By reading the code a little more critically, bdev_nvme_submit_request()
can call bdev_nvme_readv() directly in this case, and do in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I005c70deabf7fbfe84b7029e9ef103ae122605e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5558
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ctrlr pointer is already cached to nvme_io_channel.
Hence let's remove it from the helper functions, bdev_nvme_create_qpair()
and bdev_nvme_destroy_qpair().
The following minor fixes are done together in this patch.
Fix the error paths of bdev_nvme_create_qpair() because
bdev_nvme_destroy_qpair() cannot be used as is in this case.
When calling bdev_ocssd_destroy_io_channel(), check if nvme_ch->ocssd_ch
is not NULL instead of spdk_nvme_ctrlr_is_ocssd_supported().
Cache nvme_bdev_ctrlr to nvme_io_channel just before calling
bdev_nvme_create_qpair() because the pointer is more associated
with qpair.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic96b7d0fa27dd1f32d573eecdc9d4eacc5593bde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5511
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out each RPC configuration from bdev_nvme_config_json() and
bdev_ocssd_namespace_config_json() into a helper function, respectively.
These changes will make us easier to introduce subsystem into the
NVMe bdev module.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I297f3fb47893d45463e742834c58d2b1213a4b01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5468
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is recommended to read CSTS when there is a timeout.
If CSTS.CFS (Controller Fatal Status) is set, we should
reset the controller.
But if an admin command on a fabrics controller times
out, reading CSTS submits another fabrics command that
could also timeout. Even worse, we are recursively
polling the admin queue for completions in this case.
Fixes issue #1716.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d31f6302375c52eba6f4370748d622fbd25ca7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was missed when this option was added recently in
46a348597 (rpc: add keep alive parameter in bdev nvme).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38fa2d4fc7c995bb0cea89b7b8cb51b2ce72aaa0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5512
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add keep alive timetout parameter in bdev_nvme_set_options.
NVMe bdev can set this value especially when we test with
bdevperf.
Fix github issue: #1690
Change-Id: I255c935671b74cdb615a8d393e7d7e84524f3c23
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5306
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In other places, nvme_ns->populated has been used to check an namespace
is active for an existing nvme_bdev_ctrlr. We do not need to call
spdk_nvme_ctrlr_is_active_ns() again. Follow it in this patch.
Besides, factor out the namespace comparison into a small helper
function bdev_nvme_compare_ns(). It will be used to check if two
controllers have the common namespace for ANA multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8aad2f58aae1fd45ca0dd981dded1c406f215ac0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5359
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously, we separated two cases, creating an new nvme_bdev_ctrlr
and adding an new path to an existing nvme_bdev_ctrlr as early as
possible.
However, we can merge creating an new connection between these two
cases. In this patch, connect_attach_cb() calls bdev_nvme_add_trid()
and then calls spdk_nvme_detach() if the nvme_bdev_ctrlr whose name is
ctx->base_name already exists.
This will simplify ANA multipath feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2eec92dbf96e979690a1087c5c4fc306a29f15de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5329
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move bdev_nvme_add_trid() up in a file to locate it before
connect_attach_cb(). The next patch will change bdev_nvme_add_trid()
to be called by connect_attach_cb() to merge the connect operation
for failover case.
bdev_nvme_add_trid() will be associated more closely with
connect_attach_cb() and bdev_nvme_create(). To make it clear,
move bdev_nvme_remove_trid() down before bdev_nvme_delete() too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5eb491baea57d715aadc07f206b94884334efaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5328
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even if we use TAILQ_FOREACH_SAFE(), it is not safe to lock and unlock
while linked list is parsed.
To fix such erroneous implementation, use SPDK message.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79a126560ccd847149d4d06bb3d2111e43060ff7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5321
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Factor out the common operation to destruct nvme_bdev_ctrlr further
into an new helper function _nvme_bdev_ctrlr_destruct() from
remove_cb(), bdev_nvme_delete(), and bdev_nvme_library_fini().
The next patch will use SPDK message to fix the race condition
by locking/unlocking during linked list parse.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5392bebcf830fac6165aa424b06aec0c9274dc8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5320
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently only nvme bdev module implements this interface. Bdev module
context (in this case spdk_nvme_ctrlr opaque handle) allows for nvme
interface usage for additional management.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6302c9229d5f7f294a3c1472d9e8dc1519637ffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When we support ANA multipath, I/O path will get nvme_bdev_ns from
nvme_bdev_ctrlr->namespaces, and nvme_bdev_ctrlr will be got from
nvme_io_channel.
Hence this patch adds a pointer to nvme_bdev_ctrlr to struct
nvme_io_channel.
As a side effect, nvme_io_channel->ctrlr is helpful to simplify
admin command submit functions, and do it in this patch.
For ocssd_bdev, we will do the similar change later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6976d1543ccda37dde4b81b2124d88f0d05ed7eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5055
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we support ANA multipath, we will use spdk_nvme_ns and
spdk_nvme_qpair pointers for I/O submit functions after checking
ANA state of spdk_nvme_ns.
It will be efficient and easy to understand if we unify such check.
The next patch will provide a helper function to do such check.
This patch changes the parameters of I/O submit functions as a
preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic741caa1d7e6df844b875beea776e79d4eb8d6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5204
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_flush() just completes with success now and uses only
bio parameter now, but matching parameters with other similar I/O
APIs will be good for future enhancement and following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I64be668fa781396ef68b6b506b22cb153d7b6850
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5203
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using bdev_io->bdev will be more straightforward than using
bdev_io->bdev->ctxt and &nbdev->disk.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5854ab063b7b21710e9f899dd93340624a8cb49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5202
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
