Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both max and min should be reset periodically. We can use the queue
depth sampling poller to reset these but the queue depth sampling poller
is optional. We extend the bdev_reset_iostat RPC to support mode to
reset all or only max/min fields.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9ce54892f6e808f6a82754b6930092f3a16d51ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add a helper function bdev_reset_device_stat() to reset I/O statistics.
This funciton is used for the bdev_reset_iostat RPC.
We do not have any plan to use bdev_reset_device_stat() outside
lib/bdev. Hence, we do not add this as a public API.
Then, add a new RPC bdev_reset_iostat to reset I/O statistics of a
single bdev or all bdevs.
Resetting I/O statistics affects all consumers. Add a note to CHANGELOG
and doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I97af09107b5c3ad1f9c19bf3cbf027457c4fbae7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15350
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add rpc method trace_get_info to show name of shared memory file,
list of the available trace point groups and mask of the available trace points for each group.
Fixes#2747
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: I2098283bed454dc46644fd2ca1b9568ab2aea81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Add an option "--generate-uuids" to bdev_nvme_set_options
RPC to enable generation of UUIDs for NVMes devices that
do not provide this value themselves. The identifier is
based on a serial number of the device, so a bdev
using this NVMe will always be assigned the same UUID.
Part of enhancement from #2516.
Change-Id: I86d76274e5702d14ace89d83d1e9129573f543e2
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6cd3f18d1b469d5ef249d26ddb2923ca6b970bd4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow CPU core locks to be enabled and disabled
during runtime. This feature will be useful
in cases like SPDK hot upgrade, where
locking should be disabled temporarily.
Change-Id: I9bc7292fd964abffc7214d074d191f38b13583c3
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support injecting data corruption for processing read/write I/O.
Add two parameters, corrupt_offset and corrupt_value, and an error
type corrupt_data.
For write I/O, inject data corruption before submitting write I/O
to the underlying bdev. For read I/O, inject data corruption after
read I/O successfully returned.
Cause the data corruption by xoring the value at the corrupt_offset
with the corrupt_value. corrupt_value is required to be non-zero to
cause data corruption necessarily.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I67d8d252b06d7a221413e74996f7f894e6519556
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Add a new parameter "-c" to display the per channel IO statistics
for required Bdev
./scripts/rpc.py bdev_get_iostat -b Malloc0 -h
usage: rpc.py [options] bdev_get_iostat [-h] [-b NAME] [-c]
optional arguments:
-h, --help show this help message and exit
-b NAME, --name NAME Name of the Blockdev. Example: Nvme0n1
-c, --per-channel Display per channel IO stats for specified device
This could give more intuitive information on each channel's processing
of the IOs with the associated thread on the same Bdev.
Please also be aware that the IO statistics are collected from SPDK
thread's related channel's information. So that it is more relating
to the SPDK thread. And in the dynamic scheduling case, different
SPDK thread could be running on the same Core.
In this case, any seperate channel's IO statistics are returned to
the RPC call and if needed, further parse of the data is needed to
get the per Core information although usually there is one thread
per Core.
On the other hand, user could run the framework_get_reactors RPC
method to get the relationship of the thread and CPU Cores so as
to get the precise information of IO runnings on each thread and
each Core for the same Bdev.
Change-Id: I39d6a2c9faa868e3c1d7fd0fb6e7c020df982585
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
For write, verify DIF/DIX before submission and for read, verify
DIF/DIX after successful completion.
As same as the NVMe bdev module and the NULL bdev module, DIF/DIX
verification is done based on the DIF type and DIF insert/strip is
not supported.
In near future, the bdev I/O APIs bring an I/O flag to the underlying
bdev and the malloc bdev module will be able to decide DIF/DIX
verification based on the I/O flag.
One important feature is to setup protection information when
creating a malloc disk. Otherwise, all initial reads will fail
if protection information is enabled.
For users, add some explanation about the dif_type parameter
into doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I93757b77c03cade766c872e418bb46d44918bee2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14985
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The malloc bdev module supports both of interleaved and separated
metadata in this patch.
Different from the NULL bdev module, opts->block_size is a data block
size and a block size is caculated internally as a sum of
opts->block_size and opts->md_size if opts->md_interleave is true, or
opts->block_size otherwise. This will be more intuitive. Additionally,
opts->md_size accepts only either of 0, 8, 16, 32, 64, or 128.
Protection information (T10 DIF/DIX) will be supported in the
following patches.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icd9e92c8ea94e30139e416f8c533ab4cf473d2a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
A new `oclass` parameter allow to specify DAOS DFS object class that is
responsible for data redundancy and protection.
Examples of the object classes could be found here: https://github.com/daos-stack/daos/blob/master/src/include/daos_obj_class.h
The default value is OC_SX for the max IOPS.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: Ia48681832458c2266eb7c3bcae0df2055e59e309
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15006
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Support Aio bdev 'readonly' option in RPC call. The read-only flag
can be dumped from the bdev info. Any writes on a read-only aio bdev
will be fail.
Signed-off-by: Yuhua <yuhua@smartx.com>
Change-Id: I939f72479f8953a3678a8df3083ecce0f96844fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14955
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Here we use vfu_tgt library and emulate a virtio-scsi device
as the next use case.
Compared with vhost-user-scsi, the packed ring is supported with this
patch.
Example usage method:
1. scripts/rpc.py bdev_malloc_create -b malloc0 $((512)) 512
2. scripts/rpc.py vfu_virtio_create_scsi_endpoint vfu.0 --cpumask 0x1 --num-io-queues=4 \
--qsize=128 --packed-ring
3. scripts/rpc.py vfu_virtio_scsi_add_target vfu.0 --scsi-target-num=0 --bdev-name malloc0
4. Start QEMU with '-device vfio-user-pci,socket=/spdk/vfu.0'
Change-Id: I8f35d1d21aaec34844d6ddb59dc997a64f141179
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Here we use vfu-tgt library and emulate a virtio-blk device
as the first use case of vfu-tgt library.
Usage example with QEMU:
1. build/bin/spdk_tgt
2. scripts/rpc.py bdev_malloc_create -b malloc0 $((512)) 512
3. scripts/rpc.py vfu_virtio_create_blk_endpoint vfu.0 --bdev-name malloc0 \
--cpumask=0x1 --num-queues=2 \
--qsize=256 --packed-ring
4. Start QEMU with '-device vfio-user-pci,socket=/spdk/vfu.0'
Change-Id: I45e45360c669584583b0b8a3f83250ab6c48efec
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12315
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Previously SPDK use libvfio-user library to provide emulated NVMe
devices to VM, but it's limited to NVMe device type only. Here we
add SPDK vfu_target library abstraction based on libvfio-user which
supports more PCI device types.
We will add virtio-blk and virtio-scsi devices emulation based on
vfu_tgt library in following patches, actually this library can
support NVMe emulation too, due to the fact that the NVMe emulation
is already exist, so we will keep the NVMe emulation which based on
libvfio-user directly as it is.
Change-Id: Ib0ead6c6118fa62308355fe432003dd928a2fae9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is consistent with the use of terms in other parts of SPDK and fits
with the code living under module/
Change-Id: If182f7cf2d160d57443a1b5f24e0065f191b59b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add gathering of some performance counters and RPC for printing them.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I2e77d37fb66459240ff2e241f2b1f77c60f4eef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13390
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Trim is now also available as a management operation via RPC.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I05b778a611e9809a14bfed50b01986bb4649a35c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
the current timeout parameter of the interface bdev_iscsi_set_opts is
duplicated with the timeout parameter of the JSONRPCClient parameter,
which may cause the iscsi timeout and JSONRPCClient parameters to
overwrite each other.
Signed-off-by: gongwei <gongwei833x@gmail.com>
Change-Id: I96604a7e1a495ac2e99518812297230680df42fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
L2P cache allows for partial storing of L2P in memory, paging in and out
as necessary, lowering the total memory consumption.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I727fec9d2f0ade4ca73e872d62a2ec10cfdb0a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13353
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added a new RPC, vmd_rescan, that forces the VMD driver to do a rescan
of all devices behind the VMD. A device that was previously removed via
spdk_vmd_remove_device() will be found again during vmd_rescan.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ide87eb44c1d6d524234820dc07c78ba5b8bcd3ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added new RPC, vmd_remove_device, that allows users to remove a PCI
device managed by the VMD library simulating a hot-remove.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifb84818ce8d147d1d586b52590527e85fe9c10de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13957
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
The new name is consistent with the naming scheme of
<subsystem>_<action> that all of our other RPCs use.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2cae7af5715add8eba26501cd192a6ac4884ec69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds API for fast shutdown - the ability for FTL to skip most
of the metadata persists made during clean shutdown, and relying
on their representation in shared memory instead. This allows for
faster update of SPDK (or just FTL, assuming no metadata changes),
with downtime reduction from 2-5 seconds to 500-1000 ms (for
14TiB+800GiB base and cache drives).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5999d31698a81512db8d5893eabee7b505c80d06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This commmit introduces a new bdev type backed up by DAOS DFS.
Design wise this bdev is a file named as the bdev itself in the DAOS POSIX
container that uses daos event queue per io channel.
Having an event queue per io channel is showing the best IO throughput.
The implementation uses the independent pool and container connections per
device's channel for the best IO throughput.
The semantic of usage is the same as any other bdev type.
To build SPDK with daos support, daos-devel package has to be installed.
The current supported DAOS version is v2.X, please see the installatoin and
setup guide here: https://docs.daos.io/v2.0/
$ ./configure --with-daos
To run it, the target machine should have daos_agent up and running, as
well as the pool and POSIX container ready to use, please see the
detailed requirements here: https://docs.daos.io/v2.0/admin/hardware/.
To export bdev over tcp:
$ ./nvmf_tgt &
$ ./scripts/rpc.py nvmf_create_transport -t TCP -u 2097152 -i 2097152
$ ./scripts/rpc.py bdev_daos_create daosdev0 <pool-label> <cont-label>
1048576 4096
$ ./scripts/rpc.py nvmf_create_subsystem nqn.2016-06.io.spdk1:cnode1 -a -s
SPDK00000000000001 -d SPDK_Virtual_Controller_1
$ ./scripts/rpc.py nvmf_subsystem_add_ns nqn.2016-06.io.spdk1:cnode1
daosdev0
$ ./scripts/rpc.py nvmf_subsystem_add_listener nqn.2016-06.io.spdk1:cnode1
-t tcp -a <IP> -s 4420
On the initiator side, make sure that `nvme-tcp` module is loaded then
connect drives, for instance:
$ nvme connect-all -t tcp -a 172.31.91.61 -s 4420
$ nvme list
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I51945465122e0fb96de4326db742169419966806
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Note, this change only sets defaults for the ID/KEY,
more specific use cases like NVMe/TCP may set the ID and KEY on a per connection basis.
Also simplify PSK identity string, that isn't NVMe focused.
NVMe libraries using this will need to construct more complicated
identity strings and pass them to the sock layer.
Example:
rpc.py sock_impl_set_options -i ssl --psk-key 4321DEADBEEF1234
rpc.py sock_impl_set_options -i ssl --psk-identity psk.spdk.io
./build/examples/perf --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
./build/examples/hello_sock --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
Change-Id: I1cb5b0b706bdeafbccbc71f8320bc8e2961cbb55
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13759
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Docs explaining how to use the RPC are in the next patch in the
series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7dab8fdbeb90cdfde8b3e916ed6d19930ad36e66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12848
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RPC provides a list of initialized engine names along with
that engine's supported operations.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I59f9e5cb7aa51a6193f0bd2ec31e543a56c12f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13745
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This implementation of xNVMe BDEV module supports the char-device / ioctl-over-uring,
along with the "regular" io_uring, libaio, POSIX aio, emulated aio (via threadpools) etc.
Code changes done :
a. Addition of xNVMe submodule to SPDK
b. Modification of RPC scripts to Create / Delete xNVMe BDEVs
c. Implementation of xNVMe BDEV module
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: If814ca1c784124df429d283015a6570068b44f87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11161
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This shouldn't be an on/off option, but should expect an integer value
specyfing the number of bytes.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I888af3253ad619a6c5f86e6d35454dafe8fc09a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13540
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I39026e0866f2a9aecda6588bb3f91ed87676ddd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I9c1ba26e2b867b91fd5f7cd91edbff1844f08c79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12979
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
nvmf_get_subsystems functions
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: Ibce4122aed1f6c4e22b6286f52f4295a4cc13e0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I11ef4947324dfba796fc16da566c0b8a1e606a00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I3e009139e10bbd2c9aa94e88ffdeb3a6570c4110
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I8db8ab436e15a313f8141ada14c5b60f2545266d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I757b893a65a1c0e21310171fa8b89a87e28b87a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12871
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will make it possible for out-of-tree virtio-blk transports to pass
transport-specific options when creating controllers.
Change-Id: I862f0f8096aadb5e47bbe4c1c418aaf06691e1ac
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12818
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will make it possible for out-of-tree virtio-blk transports to pass
their own, transport-specific, set of options.
Change-Id: Ic37b7fb09ca74a744c006d032638d02cc3350471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12816
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
