Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bandwidth measurement is realized by bwm-ng tool.
Using this measure tool will help us to check network saturation.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b95b9b4ac3ca3b1847ec72ab7ea333807befe89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3190
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The original image was prepared using SCSI bus.
Using IDE explicitly speeds up boot process as the
system does not have to look where to boot from.
Change-Id: Ia9f649d1c46c591135833c02ed60b3c960ad8b98
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2840
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Arch Linux instance is failing on that CI. Seems that
libffi is a dependency for installing configshell_fb
and it's missing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I988f2fb5e879b9e8882409c9c2772d5bd2c5e045
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
In some OSes (e.g., Fedora30), /usr/lib is not one of the default
library loading paths. So Let's change it into /usr/lib64.
To address: #1471
Change-Id: I89a66b6096fc1096be7f7e7bb6414f0998b3d974
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3261
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
I had previously implemented a portion of the naming convention
check that looked for symbols that had been moved by performing
two checks:
git diff commit1 commit2 -- libname | grep for added function
git diff commit2 commit1 --libname | grep for added functions
and then subtracting the values returned by the second check from
the values returned by the first check. That works as long as the two
diffs are reciprocal (i.e. the first diff is a mirror image of the
second). However, this has proven to not be the case.
This change fixes that check by performing the smae diff twice and
grepping for removed functions the same time.
Change-Id: I09c81921d68436baeee706f2d9a6d30db1d23976
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3229
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It will except in the middle of creation if an error command inputted.
usrs hope it could stay on consle. So change this.
For example:
'''
SPDK CLI v0.1
/> lsss
Command not found lsss
/>
'''
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ib8d38b5d3f6db1bae965c56e3b78ff715a574189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2886
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also check nullblock subsystem number.
There was missing subsystem number definition in tgt_start
for null_block tests, and wrong filenames generator in
kernel section.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iae5bc6f497176d6c2a12ab430f4c6c92104fa4a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2570
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make sure that git diff ignores all submodules while looking for
changes made by astyle. This should prevent the following issues
from occurring:
object directory /var/ci_repos/dpdk-submodule.git/objects does not exist; check .git/objects/info/alternates
object directory /var/ci_repos/intel-ipsec-mb.git/objects does not exist; check .git/objects/info/alternates
error: bad tree object HEAD
fatal: 'git status --porcelain=2' failed in submodule intel-ipsec-mb
Change-Id: Ie9a39e324674337fdbd6bf627da6e80775ceaeec
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3223
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During perf test we figured out, that global qd
settings is split between disks number in filename.
Setting this parameter (multiplied by section disks number
and numjobs) in filename section give as expected value.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I89a44e48f10da131e2e9128f3ff2fbfb197076ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2749
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Skip copying and building SPDK on host systems if
specified in configuration file.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4f9c0dd77e020dfd866f52dc138526e63dd9222d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3075
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Aggregate separate read/write results into
a single stat. Reduces the number of additional
fields and formulas in spreadsheets when preparing
performance reports.
Change-Id: I5fdab35c1bb69aad98f7b9808885801db0416449
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Test result IOPS and BW are a sum from across all initiators,
but latencies should be an average from accross initiators.
In previous version it was mistakenly a sum, and that had
to be manually handled in Excel spreadsheets when gathering
data for performance reports.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I17e38e3cdd593dcda9730c19decc2d6a72a11130
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Save each initiator results to a .csv file. Useful
for a bit more insight than aggregated results.
Change-Id: I1fafe52ba78f2c62abfd0e3c863505515a363cd3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3053
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This reverts commit 436b9be9d0.
Reason:
these change makes Vagrantfile rely on env variables (eg. spdk_dir),
which are only set when running scripts/vagrant/create_vbox.sh script.
After create_vbox.sh has finished env variables are not accessible,
but still needed to work with Vagrantfile using Vagrant commands
like 'vagrant ssh' or 'vagrant reload', etc. This results in
configuration errors from Vagrant and scripts being unusable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I135c42d248c13dfa93c2210dabce49df8116e8f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3055
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
I suggest putting "make clean" before "./configure". Like Migration-tc3a.sh (spdk/test/vhost/migration):
ssh_remote $MGMT_INITIATOR_IP "cd $spdk_repo_share_dir/spdk; make clean; ./configure --with-rdma --enable-debug; make -j40"
Otherwise, once the configuration is changed, some outdated compiled files may remain after "make clean".
Change-Id: I7300749986129cbfaef44f8ff72fad0449f4e081
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2805
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow to specify additional argument which will tell Vagrant to enable
CMB on given nvme drive. The format of the argument is any string which
is then simply converted to plain "true". E.g.
./create_vbox.sh -b "/path_to_nvme_img,nvme,3,true"
Change-Id: I7de55e46491318b082bf4e2165260091b44d60f0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This can potentially replace waitforlisten() in our test scripts.
$ ./scripts/rpc.py -h
-r CONN_RETRIES Retry connecting to the RPC server N times with
0.2s interval. Default: 0
[...]
$ ./scripts/rpc.py -r 10 spdk_get_version
<SNIP the usual python exception>
rpc.client.JSONRPCException: Error while connecting to
/var/tmp/spdk.sock
Error details: [Errno -2] Name or service not known
real 0m2.452s
user 0m0.242s
sys 0m0.020s
Change-Id: I204da366360647fcce8f8de0eb25b0f576aabc5b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2751
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In a few tools or languages, slash(/) is maybe a delimiter by default in regex.
An unescaped delimiter must be escaped with a backslash (\).
Otherwise the pattern of regular expression will be error
when delimiter is slash(/) in a few special environment, i.e. in MinGW32 git bash.
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Change-Id: I73b556416b98e135eb240078dcc68f80e08c5e74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2488
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was an edge case in this check where a public symbol
definition was just moved and that movement triggered this
check. Going forward, check the diff for symbols that were
both added and removed in the same patch. This indicates a
symbol that was just moved instead of newly added.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I71bbcd6d6b3e0a2133e77c29f4ec7a4f2b09e3c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Clearlinux after installation has no empty environment variables,
which caused test failtures.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8e0673a22c1fe3cf93232704bf8950be357a21b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2717
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
It turns out we have a function to compare version numbers.
It additionally handles cases like "3.0.10 > 3.0.9". The
previous code returned false, the new one returns true.
version_lt() actually tests for less or equal, so compare
against 3.1.0 - the real minimum shfmt version we need.
Change-Id: Ibd18c4505e5b81c0073a907f23c3fc034cfbafbe
Suggested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2574
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously when doing the naming conventions check, we were
checking against master which was causing some weird issues on
patches which weren't rebased. The much simpler check is to just
compare each patch against the previous one.
This method still works to prevent any bad changes from getting
merged, but handles naming issues on a patch by patch basis.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic031ce07ca1c67819b792dc292dcf6c50df5b1a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change-Id: Iee7ba04c489ee1192f6fd65c6647c78536440246
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2508
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I3617a08089b11ace54f34ce2f21bd120a9aa05a3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie106459d7dbe92e32933dad569b79c348a8f0052
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa29cdb1920ec3283c1fa62dd4fc20d4c58b1340
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2505
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I71b129b3928f1d5881f42ebfd1510a3fb4055cd3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib28364c84a46b98c36ea7202412b34231324f226
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If $output_dir is set, putting the shfmt diff there will make it
easier to extract it and/or look it up from the side of the per
patch build.
Change-Id: Iefb601a29f165e59b7670a8878e95bb6b16c9650
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2277
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Explain the bdev_auto_examine parameter of the bdev_set_options rpc.
Add bdev_auto_examine parameter for the bdev_set_options
in the python rpc client.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I268cd5c01129180467967c2ebfffa7c3ba7e5b1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2580
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
pip3 can come for different python releases (3.6, 3.7, etc.) and
depending on which version is installed some maj.min bins may simply
not exist.
Change-Id: Iefc26902161e2e3578d07e99a9e742b132ef11f0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2565
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test prevents anyone from adding a function that begins with
spdk to the lib or module directories without also adding that file
to the corresponding map file and a header in spdk/include or
spdk_internal/include.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ife7db13d4bb8fec7570c8492ac3326222a850c36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2423
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the other checks simply print OK if the test passes
this check prints out a lot of text (especially when run at the
tip of long patch series) that can make it difficult to tell if
anything is actually wrong.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie681d200aa13f208e4afa1ab419cbad63ef6606c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2403
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
A newer version of shfmt was released, but the script still
looked explicitly for the older one.
Make it execute the first binary '^shfmt.*' in PATH whose --version
returns at least v3.1.0.
Change-Id: If621abfa4d995a9dc985e6bab8c33aa36c327fae
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2428
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When using vfio a warning for memlock limit is printed.
TARGET_USER is one set by caller when executing the script,
or set to user that called the script (even when using sudo).
Yet ulimit was printed for the one executing the script,
most likely root.
This patch verifies ulimit for a particular TARGET_USER.
Along with more explicit information which user the
information pertains to.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I20ad62109bc316295208e21f959ecfc263307e1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1964
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds '--plugin <module_name>' parameter
to rpc.py script which is used to provide module
name with additional RPC commands that should be
included in rpc.py script. User must export path
to rpc module with PYTHONPATH before calling rpc.py
with this new parameter.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I971429a33cf4ea943d2b7f3abd5a6cb82398d2a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2263
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is relevant in context of rpc_cmd() which was introduced with the
following commit:
"scripts/rpc.py: add daemon mode" 8b98cdb64a
When rpc.py runs in a server mode, its stdin is already attached to a
pipe connected to its parent Bash process. In such a setup, it's not
possible to use some of the rpc methods, e.g. load_config().
To make use of said methods possible, allow them to load the config
from different sources - a regular file or a string.
Change-Id: I6fa7d13fa1957b6449ce5d5c5a810bd58d0a5703
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2106
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The -1 is valid value indicating that the node id for given device
has not been specified. Detect it and map it to "unknown".
Change-Id: Id97d9046be0e4d5ff257bca66ae3e73e906253fe
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2229
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use * instead of ? to match all the potential nodes not only those
with a single digit id. The actual node limit is dependent on
kernel's CONFIG_NODES_SHIFT hence in theory, the actual number of
numa nodes may be far greater than 10.
Change-Id: I1d587735b433ed23594725b9d77a44f7cc729494
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2228
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since sysfs is not used by the FreeBSD the following error can be
seen each time gen_nvme.sh is run:
grep: /sys/bus/pci/devices/$bdf/uevent: No such file or directory
Avoid that by looking up the pci address in a way specific to
FreeBSD.
Change-Id: If81e71cece52c2f27dcf68f7a7eba3dd7d8ce10f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2227
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, store kernel name in the separate var and use it throughout the
entire script.
Change-Id: Iaa1c4c4aa52fb4aa708fb476478a81e9c6067b58
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2340
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will probably be not installed by default in CentOS
installations. If we're going to use "config-manager" then
it requires yum-utils.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7d310e376430b065742b671d983d11dd87bb5fac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2221
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add new dev tool for enforcing proper formatting of the Bash code
across the entire repo. This is done in order of defining a common
set of good practices to follow when writing .sh|Bash code.
As powerful as shfmt may be, it allows only for some specific rules
to be enforced, hence it still needs to work side by side with
shellcheck syntax-wise. If it comes to style, following rules are
being enforced:
* indent_style = tab - Lines must be indented with tabs. The exception
from this rule is the use of heredocs with
<<BASH redirect operator. Spaces can be used to
format the line only if it's already preceded
with a tab.
* binary_next_line = true - Lines can start with logical operators. E.g:
if [[ -v foo ]] \
&& [[ -v bar ]]; then
...
fi
* switch_case_indent = true - case|esac patterns are indented with tabs.
* space_redirects = true - redirect operators are followed with a space.
E.g: > foo over >foo.
In addition, shfmt will enforce its own Bash-style for different parts
of the code as well. Examples and more details can be found here:
https://github.com/mvdan/sh
Change-Id: I6e5c8d79e6dba9c6471010f3d0f563dd34e62fd6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1418
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With issues similar to https://github.com/spdk/spdk/issues/1293 it
would be better to use temporary directories for spdk workspace
instead of depending on the hardcoded path (/tmp/spdk). This will
mitigate potential scenario where permissions of the target dir
are suddenly changed in-between autobuild runs.
Change-Id: If44a2dcce712a185287186f33e7361223dc6d451
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Main subparser for rpc lists all positional arguments. Like so:
positional arguments:
{framework_start_init,start_subsystem_init,framework_wait_init,....
This again is duplicated with better help message.
This patch just removes this list, leaving the most detailed one.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5e6b9d0dd6ccf68bfe1cd5959ed509032738c037
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2126
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The main parser will show usaged like so:
usage: rpc.py [-h] [-s SERVER_ADDR] [-p PORT] [-t TIMEOUT] [-v]
[--verbose {DEBUG,INFO,ERROR}] [--dry_run] [--server]
{framework_start_init,start_subsystem_init,............
The above contains very long list of all RPCs.
This is duplicates help from the subparsers, which contain
more descriptive help message.
This patch replaces the usage with:
usage: rpc.py [options]
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibf400987103f5571f79c57d8a9588d97f463d773
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2125
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Any time script is called an RPC is called and socket
connection is attempted.
This should not be required when no arguments were provided,
such as calling help to explore possible options.
Example of the error:
[tzawadzk@PowerEdgeFour spdk]$ sudo ./scripts/rpc.py
Traceback (most recent call last):
File "/home/tzawadzk/spdk/scripts/rpc/client.py", line 40, in __init__
self.sock.connect(addr)
ConnectionRefusedError: [Errno 111] Connection refused
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "./scripts/rpc.py", line 2438, in <module>
args.client = rpc.client.JSONRPCClient(args.server_addr, args.port, args.timeout, log_level=getattr(logging, args.verbose.upper()))
File "/home/tzawadzk/spdk/scripts/rpc/client.py", line 56, in __init__
"Error details: %s" % (addr, ex))
rpc.client.JSONRPCException: Error while connecting to /var/tmp/spdk.sock
Error details: [Errno 111] Connection refused
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3734e1603fa7151fd53b99b8af4ea79bf82fe0f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2124
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Expose a cache of pci devices in form of an assoc array that could be
looked up during the runtime of a script like setup.sh.
In case of setup.sh, caching speeds up execution quite visibly:
config run, no caching:
real 0m4.488s
user 0m1.440s
sys 0m1.260s
config run, caching in use:
real 0m2.876s
user 0m0.365s
sys 0m0.420s
Note that for initial config runs, binding controllers to proper
drivers is the actual bottleneck.
status run, no caching:
real 0m1.877s
user 0m1.252s
sys 0m0.984s
status run, caching in use:
real 0m0.371s
user 0m0.242s
sys 0m0.204s
reset run, no caching:
real 0m2.559s
user 0m1.409s
sys 0m1.322s
reset run, caching in use:
real 0m0.960s
user 0m0.432s
sys 0m0.419s
Additionally, in case common tools, e.g. lspci, are missing, fallback to
sysfs to pick all needed devices from the pci bus. Targeted for Linux
systems only.
Change-Id: Ib69ef724b9f09eca0cbb9b88f1c363edc1efd5dc
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1845
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is required for SSL verification when running on https.
Added argparse to handle multiple optional arguments.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib8731bafaaf38264ed86ed84ca7eeca5ff4935b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2122
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In create_vhost_vm we export SDPK_VAGRANT_DISTRO
variable to vagrant subprocess that is called
during the script.
But if SPDK_VAGRANT_DISTRO is an array variable,
then Vagrant will not see it
and always default to ubuntu16.
This small patch fixes that.
Change-Id: I45e9ed4f847e4fa10b90650a613f9cfe17ee38e3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new RPC also includes and option for which
idxd config is to be used. Config options will be
explained in detail in a later patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I1322bab4d6ca9cc45ec3a56d7267dc7dc09dbea3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1726
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add bin/unbind support between the kernel idxd driver
and VFIO. UIO not tested but tested this extensively
on a system with valid idxd kernel driver and VFIO.
Future patches in this series add the actual idxd
low level library and bdev accel plug-in module. See
those patches for more details on idxd.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I09dd00b1aedcf88577335bde79d31cfd50ac4cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Disable default synced folder. We have our own set of
directories to synchronize so this is not needed.
Change-Id: Ie52e38af94fc2c403e3d3f095071833b9df09c9c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I66c1c965d9de8b4e9625c1f1850cbb28d11138ad
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
In order to have all the boxes fully functional we
need to select the proper tool for synced folders.
FreeBSD boxes fail to set proxy properly via vagrant-
proxyconf plugin, so they fail to install rsync and sshfs
clients. NFS is pre-installed so we can use it.
Other boxes, like generic/fedora*, have issues using NFS
so we need to use sshfs/rsync instead.
Change-Id: Ic191b5a80dbd43479943c1739971abdff39baf41
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Icf45fbdff547fcf45c361b1d9c95b352756ad126
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update vhost blk contruct rpc, make it enable to
support packed ring feature.
Change-Id: Ia1f75e72e8441e8d82fad89073e4875f89e5b9cd
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On some systems, CC is set to a value with arguments already included.
Make sure not to lose those.
Change-Id: I93b354dc21f045f3cacff1f0d1214442ea893aa5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Sync "output" directory (containing all build results,
like doc, coverage, test completions, etc.)
from guest to host.
Change-Id: I9a57a72eb610aacde011fc39bb8d39c74486cef1
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add "halt" command before packaging, it's needed for this
process. Destroy the VM once it's packaged as we have no
further use for it.
Move provision-related commands to update.sh.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib8041df023b80b4cd5fbad734481eb6bd4ffc21c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Some time ago I created a patch which unified all boxes
URLs to generic/* which come from a single author/company
and seemed to be quite universal.
Unfortunately some of the boxes are not that generic as
the name suggest, so I am reverting my change and will
use boxes from vaious sources.
Ubuntu 1804 - had heavy DNS issues due to hardcoded
addresses in resolved.conf. Very hard if not impossible
to fix if working with synced folders like we do.
Centos 7 and 8 - sshfs not available by default. Also
had some other minor quirks. Official boxes available
so let's use them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I514d3b92c6ac5844b1929fdadfd35d6079933247
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1622
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Owner and group were not set properly on Ubuntu systems,
as they use different names for that.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie7fc49516072ce4bcd506c4c39bbd26786004c49
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1580
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These can't be hardcoded to a single location. It makes
running multiple VMs with OCSSD emulation impossible.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4ce0412fc9fc4542670a9e70c08219003e41828b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1488
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Just moving stuff around and updating some information.
I just felt like it's needed.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ia41f99603fb60111924cd5a3daf3c44091245c89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1157
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We are not using VMs to run Vhost tests (at least at
the moment) and these steps are outdated. These steps
will need a re-write if we decide to put them back in,
so we can remove them for now.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I61d09bdc481814d8bcf6fe86ed4ccd84b36ad8d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1155
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Remove Fedora 29 from the OS list. It reached EOL
some time ago and is not supported.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie1bd704a39ab4c83d5e652741d21f6f0ac260540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1156
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
service is a plain Bash wrapper which either executes systemctl or
rc sysvinit scripts directly, hence its exit status should follow
standard logic - 0 for success != 0 for failure.
Reverse the check to not complain about service failure when it
was actually successfully started.
Change-Id: I29dd22c884157182549ebcc2ab4097eb098d7d3b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1603
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Test in event.sh take 5 seconds on CI at this time.
For the tests to run both SPDK_RUN_FUNCTIONAL_TEST
and SPDK_TEST_EVENT had to be enabled.
This served as very minor time saver, so removing
this flag shouldn't affter test times more that the
5 seconds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3eaa587daf28b2efbc3cfdff5ad648b7529e7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
time.clock() was depreceted since Python 3.3 and was finally
removed in Python 3.8.
https://docs.python.org/3.8/whatsnew/3.8.html#api-and-feature-removals
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ffe372b61c8afc0ddbbee0064b95059fa184616
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
By default "make install" installs pmdk header files in
/usr/local/include while autotest scripts expect them
to be in /usr/include.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I906ffd8a7858a37525758c3fc8129cb22286a8f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
pkg-config was missing for pmdk installation.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I795c4b3a71d611292beaa650960afb639e827e78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Vagrant fails during creation virtual machine using custom qemu emulator.
Setting machine type to "pc" resolved this problem.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1822439bb2235b5881d3c331c378017928953ac4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests.
Fixes#1235
Change-Id: I82b9935fc88605b636c2096be6c71d4880a567c8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1309
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to use num_cores and cpus_allowed option also
in Kernel initiator side.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iad4e8bf7cd8a614ada8f443a8b1036dc2c4803e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Error msg in common.sh should be printed into stderr
in order to avoid improper usage.
For example:
If env has no lspci and pciconf, then function
iter_all_pci_class_code will return the error msg back,
every word in error msg will be used by caller wrongly.
Change-Id: I6a875e49527539ba82bd331c8878e972e26cbc39
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add rpc_cmd() bash command that sends rpc command to an
rpc.py instance permanently running in background.
This makes sending RPC commands even 17 times faster.
We make use of bash coprocesses - a builtin bash feature
that allow starting background processes with stdin and
stdout connected to pipes. rpc.py will block trying to
read stdin, effectively being always "ready" to read
an RPC command.
The background rpc.py is started with a new --server flag
that's described as:
> Start listening on stdin, parse each line as a regular
> rpc.py execution and create a separate connection for each command.
> Each command's output ends with either **STATUS=0 if the
> command succeeded or **STATUS=1 if it failed.
> --server is meant to be used in conjunction with bash
> coproc, where stdin and stdout are named pipes and can be
> used as a faster way to send RPC commands.
As a part of this patch I'm attaching a sample test
that runs the following rpc commands first with the regular
rpc.py, then the new rpc_cmd() function.
```
time {
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
malloc=$($rpc bdev_malloc_create 8 512)
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "1" ]
$rpc bdev_passthru_create -b "$malloc" -p Passthru0
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "2" ]
$rpc bdev_passthru_delete Passthru0
$rpc bdev_malloc_delete $malloc
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
}
```
Regular rpc.py:
```
real 0m1.477s
user 0m1.289s
sys 0m0.139s
```
rpc_cmd():
```
real 0m0.085s
user 0m0.025s
sys 0m0.006s
```
autotest_common.sh will now spawn an rpc.py daemon if
it's not running yet, and it will offer rpc_cmd() function
to quickly send RPC commands. If the command is invalid or
SPDK returns with error, the bash function will return
a non-zero code and may trigger ERR trap just like a regular
rpc.py instance.
Pipes have major advantage over e.g. unix domain sockets - the pipes
will be automatically closed once the owner process exits.
This means we can create a named pipe in autotest_common.sh,
open it, then start rpc.py in background and never worry
about it again - it will be closed automatically once the
test exits. It doesn't even matter if the test is executed
manually in isolation, or as a part of the entire autotest.
(check_so_deps.sh needs to be modified not to wait for *all*
background processes to finish, but just the ones it started)
Change-Id: If0ded961b7fef3af3837b44532300dee8b5b4663
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new JSON RPC thread_get_io_channels to retrieve IO channels
of the threads. IO channel don't have its own name and so get the
name of the corresponding IO device instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id8fbb328ffba09e1eace35994cdbf36b24832b82
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new JSON RPC thread_get_pollers to retrieve pollers of all
the threads. By adding a helper function spdk_poller_state_str(),
output poller state as string to improve readability. Most of the
code of thread_get_stats and thread_get_pollers are common and so
unify these two RPCs as possible as we can.
Sample output of thread_get_stats RPC in doc/jsonrpc.md was wrong
because thread_get_stats doesn't output ticks. Fix this together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I003ffe569d3c0651ae65c5858eff8287f7e9031d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_set_cpumask to control CPU affinity of
the thread dynamically from outside of SPDK application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b6b794405f612200a2c3cb27dc4fc1ad2e88bec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
PCM cpu measure give as result 1306 columns, we want check only ones which contains
SKTdata and SKTtraffic values.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I52b6781a7ff99e0d894f7f1c2b25b655fa274eb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/946
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To make it possible to add CONFIG_RAID5.
Change-Id: I1712bde5bae552811343fb1865f1224d3adb1c7e
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/854
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add flag for pmem dependencies needed by reduce and pmdk components.
Also add missing libpmem in Ubuntu section.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I596a1e6660f8b6f92bdab81046fa3533ae78fca3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add information about missing dependencies for Ubuntu versions smaller than 19.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I776d93e156c07c618df9cb5eeb99c0ca8f78e388
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/598
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add information about missing dependencies for Ubuntu versions smaller than 19.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id48b462be35a761fd9fad4bdc48c1757cf5a7580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Startup RPC only to avoid issues trying to switch while in use.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f1801905de0927f3610c4065182dd8fa88cdfdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
MD022 Headers should be surrounded by blank lines
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I768324b00fc684c254aff6a85b93d9aed7a0cee5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Build local vagrant box and add it to local vagrant box list.
Check if spdk box exist and use it instead of generic boxes.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib3b87c9783354680657f96b5b5adea1706712c5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary case statement in Vagrantfile
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I6aa5d0650d268851ee5af73ffc2aa54d9396fec5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/834
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
New option --package-box will install all dependencies needed to build SPDK
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iedc21812b754692a5eba87127186e11ec44d805d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When overriding with igb_uio you used to have to manually probe uio
before calling setup.sh. I feel this is a common enough use case that we
should check it in setup.sh directly.
Change-Id: I8a31f90bab6960eade468816ffe960820f83d2fe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PCM - Processor Counter Monitor is an application to monitor performance
and energy metrics of Intel® Core™, Xeon®, Atom™ and Xeon Phi™ processors.
Using this measure tool will help us to capture memory bandwidth consumed
on Intel processors.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie580d2aad6ddd98c5256df65f65e478dd78317e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
We want to split pkgdep.sh to install packeges that are required to run SPDK
and that are needed by developers.
This patch is only split one install command to divide the minimal
dependencies from the developer tools.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I332cbc430bd04e6ef2872ab762da99e837bf0fc2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow for using appends instead of writes.
Change-Id: I2f0d3bcdbb0eee034f7b0b6349de854ddbf7273d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481839
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Fix a bunch of typos, remove a few things and add some disclaimers
for legal cleanliness :)
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I366380f7b822c5b7a5ca92ab5a9bd3fd68296bee
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483752
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
It's good to have a human readable domain again.
Change-Id: If773e28a267b635a94a45b07fba9a32d62d0c248
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This script takes an optional dpdk stats file argument and tries to
parse the information from that file into a comprehensible structure. It
then provides a basic UI for printing that memory information at various
levels of granularity.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibbb09f41122be18b7e640781f3e140618e52c0ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477635
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This commit disables the custom identify handler by default.
The user has to explictly enable this handler via the set_nvmf_config
RPC or conf file.
Change-Id: I767816ba7639ebe78683993408ce6db02c7620fe
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2010: Don't use ls | grep. Use a glob or a for loop
with a condition to allow non-alphanumeric filenames.
Replacing e.g. "ls /dev/nbd* | grep -v p" would be complex
and problematic as flag -I for ls is not working when
looking for pattern.
Change-Id: I9e88359d247fe5dcf952a3388b0e7f35164768c1
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Add to pernamently excluded in shellcheck:
SC2034: foo appears unused. Verify it or export it.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib63edb8cdf8ec718981d28d5acec75772b825a48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adjust functional tests to
new FTL stack.
Change-Id: I0b8ff08c61793d7f1685942031aecf9cc88d1f24
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468738
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We have added a lot of flags to this script over time to try and shorten
parts of it that take a long time or modify the way we make and
whatnot.
In the test framework today we really have two settings, we either want
to run the entire autobuild package with all the bells and whistles, or
we just want to make the code and get on with the rest of the tests. I
believe this change can save between 1 and 3 minutes on each of the
functional test suites.
Change-Id: I7519e8320aa16b57f09f633f866dc36cb494aa80
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
SC1083: This {/} is literal. Check expression (missing ;/\n?) or quote it.
This rule points to places that are part of command
and cannot be fixed:
1. git archive HEAD^{tree}
2. vpp (e.g. dpdk { no-pci })
Change-Id: I30117913f964415cdaed94d29b1209d119e4d5a4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2097: This assignment is only seen by the forked process.
SC2098: This expansion will not see the mentioned assignment.
Apply these two rules together as they point to the same code.
Change-Id: I61020e8fd4b6db2b06ae8134d1004290a9bef9e7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
FTL library is consuming whole OCSSD device
so punit parameter is not needed for bdev ftl
configuration.
Change-Id: I56f62ea6d09b3157b70c02ccfffcd3cb07ba4597
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467950
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This shellcheck case warns users when they use the pattern A && B || C
so that they don't accidentally try to use it as an if-then-else
statement. However, there is a valid way of using this pattern to
denote, do A, if it succeeds, do B, if either A or B fails, do C.
Change-Id: I283b433c15d07873befd182e8327f2e0602490aa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476960
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Add an new RPC `framework_get_reactors` to retrieve list of all
reactors. Running threads on each reactor are included
in the output. Update jsonrpc.md and CHANGELOG accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I985d087dd41afe3033b7678af141ec8e5a2a822e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Removing hardcoded "-i 8" value for kernel NVMe-oF initiator
parameter "nr-io-queues".
This was previously merged by mistake and had to be removed
manually in test runs.
Change-Id: I454ad468863f93ac2ce93a1f0bd00f678ed4995c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Move code around so that lines containing arguments
for constructors are better aligned with how they're
inherited.
Change nvmet_dir and fio_dir to nvmet_bin and fio_bin to
point directly to executable files. There is no advantage
in using directories.
Additionally fix how fio_bin (previously fio_dir) is passed
to parent classes - it was broken and caused exceptions.
Update README.md accordingly.
Change-Id: I10524593d543e236bf318a8cd51ea5375c334e8b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477015
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds the ability to create bdevs on specified parallel unit
ranges on one OCSSD controller. It allows the user to create multiple
isolated bdevs, each operating on a separate set of parallel units.
To create a bdev on a specified range, a new parameter -r|--range was
added. For example:
rpc.py bdev_ocssd_create -c nvme0 -b nvme0n1 -r 0-4
will create a bdev on parallel units 0 through 4 (inclusive). If the
parameter is ommited, the bdev will span across all available units.
Change-Id: Icd94cf1e22fcc72806ef1ce1efd2d7031010009f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469898
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Use "scsi" libvirt disk bus
generic/freebsd boxes do not boot with default
"virtio" bus
- Manually provision proxy settings
Proxyconf plugin seems to not work with generic/freebsd boxes.
Adjust shell and pkg proxy settings manually via scripts.
- Disable synced_folders provisioning
FreeBSD boxes don't have rsync and NFS installed by default.
Vagrantfile "synced_folders" step executes before "priovision"
steps responsible for setting proxiy settings, therefore we
are unable to install it.
Change-Id: I1386ec6e89cff6b8412e97e4df95a6149da2a02c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477805
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use bash -e option to exit from script if any error
occurs.
Change-Id: Ieaad74df4598e193f619947ad34d5a1fc572d1a9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477453
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will enable us to create a helper applciation to print memory
statistics for a given SPDK application.
Change-Id: I0ad5a8163166a5d67d9a5533303ec0858297ba6b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477511
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default emulator does not support OCSSD and Multi-namespace NVMe's.
Add if statement to check if user change emulator.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I30858bfed0c2e571c1aefa6ff7ccbf3bc436a294
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch removes posibility to set cuse device path. Instead
"/dev/spdk/nvme*" path is used.
Change-Id: I7c3087772a3661eebe03fce21356c35cc8204b49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474598
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added a way to create and delete OCSSD bdevs on top of OC NVMe
controller. The controller can be created using the regular NVMe bdev
RPC call. For instance, the following (assuming 0000:00:04.0 is an
OC device):
rpc.py bdev_nvme_attach_controller -b nvme0 -a 0000:00:04.0 -t pcie
rpc.py bdev_ocssd_create -c nvme0 -b nvme0n1
creates Open Channel controller nvme0 and OCSSD bdev nvme0n1 on top of
it. The bdevs can be deleted either by the bdev_ocssd_delete call or by
deleting whole NVMe controller, in which case all bdevs are destroyed.
Change-Id: I9f2f02103fc5570a53bd26479c8690be206829c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This worked fine as-is with Python 3. But when
trying to run rpc.py with Python 2, it was noted
that simply doing print(ex) didn't print the message,
it needs to be print(ex.message).
Note that the similar code for printing the exception
message when running an RPC script was already doing
print(ex.message), so this change also makes the
code more consistent.
We aren't supporting or testing rpc.py with Python 2,
and there are some fairly significant mods required
to get it to work, but this small change at least
reduces that effort for those needing to implement
it and maintain it themselves.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0a6c94889dc631ef33835433f20f35ddc738aafb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476633
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When we get an error when calling an RPC, client.py
makes extensive use of the ** operator to add
the method and req_id to the params dict variable.
This doens't work with Python 2. We don't really
support Python 2, but there are at least some folks
out there who make their own mods to get rpc.py
to work with it. We can very easily implement this in
a way that is Python 2 friendly, so let's do that
to make it a tiny bit easier for those folks.
Incidentally, I do think the changes here also make
this part of the code a bit easier to read and
understand.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1846c80e21032ffba67128bee946b041a61d0621
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SC2119: Use foo "$@" if function's $1 should mean script's $1.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8366debbf83dfc8f3c1033e1e9fe3df17e45ab49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2090: Quotes/backslashes
in this variable will not be respected.
After fix SC2089 this warning is not actually present in
any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibe0015b569202eb7d3f3197f5c5630a67e701332
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2089: Quotes/backslashes will be treated literally. Use an array.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I40d4eef334cd030294669f8e8494f9e7a563d495
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unify all distro selections to use the same generic/* source
for downloading boxes.
"generic/" is provided by Roboxes.
Change-Id: Id5d704e35313c382a564da2a50177766293a88c1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is no "wheel" group on Ubuntu distros. Chown command
caused Vagrantfile to fail.
While at it - put the whole bash command flow into a variable
and run it as part of single "shell" provision step instead of
doing it in three steps.
Change-Id: I2853d4176f66f07f1762b339b20ced3386486f87
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Dash and double dash ("-" and "--") getopts params are safely
shifted using "shift" and "OPTIND". After that it's safe to
concatenate param array to string using "$*", especially that
there is only 1 positional parameter, which is distro version.
Previous approach ("$@" as array) made "export" impossible and
as a result VM was created with Fedora 28 distro on each run.
Change-Id: I48fa588220f8b7f46c561d480ee32920847c7903
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476128
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
It fixes change 474989.
"for blkname in $blknames; do"
was changed to
"for blkname in "${blknames[@]}"; do"
if blknames=" vda" then first blkname="" and
linux_bind_driver is called for vda although it has active mountpoint
Change-Id: I16d4379db274faa5703230072cfcf8d18a8ef5e6
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476061
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2016: Expressions don't expand in single quotes, use double quotes for that.
We need to exclude this shellcheck because in some cases, for example in
test/vhost/common.sh we echo line to new script file.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I98d322d917cbda034787cb29a267b86a8ad7e7ec
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Correct shellcheck rule SC2012: Use find instead of ls to better handle non-alphanumeric filenames
Change-Id: Ibfc54ac06ae4cecadd22954159d259295f99912f
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2128: Expanding an array without an index only gives the first element.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0e7c335af678114dc78dfb12a02369a69158e435
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Current scripts/vagrant allow us to manual create every emulated device.
This patch allow to automatic create whole emulated disk while we
create virtual machine.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If772adc282c4f6d94dab5eb7337f097a08f708e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Current scripts/vagrant allow us to create only a single file for
emulating NVMe with single namespace.
This patch allow to create multiple emulated drives with multiple namespaces.
This patch also allows to emulate OCSSD disks which are used in OCF tests.
Change-Id: Ia7a4667bd405ba18235e72bcdf608270002b5242
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I am confused with the dev_backend variable, I think that
we may not need this variable.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I26fa5e8a829e574bb1b97add753b21ad1b0fc23e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is fix the issue on fedora30 about ceph-14.*.*.
Our ceph setup is a simple or demo case for rbd creation.
Make this script can run well on all versions.
Unify the filesystems about filestore and bluestore. That
all versions' logs seem similar.
We can trace the log through file:/var/log/ceph/ceph-mon.a.log.
It can record the whole processes.
osd.0 [v2:127.0.0.1:6800/2770008,v1:127.0.0.1:6801/2770008] boot
osdmap e5: 1 total, 1 up, 1 in
fix issue: #980.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I594fdab791fdc6af6df739dacef4648e396e3d35
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The block size of non-disk files can't be automatically detected,
so add an argument to specify it.
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Change-Id: Ia11ab177b78c66ede4a09a997bba28827d83ec25
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473607
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2142: Aliases can't use
positional parameters. Use a function.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0af375c062724dc8fcee5a6cd4b8ac99bda260ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2140: Word is on the form "A"B"C"
(B indicated). Did you mean "ABC" or "A\"B\"C"?
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1655b2e76be7a5e3d615c5b34c5af9e4012ac49f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Corrected code in some files.
Most of cases cannot be corrected as we use global variables
defined in other files.
SC2154: var is referenced but not assigned.
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Change-Id: Id333587f81b0bc2456b0c97bac5343a8e5a22774
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2124: Assigning an array to a string!
Assign as array, or use * instead of @ to concatenate.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id74c55b7e1c41b6469e84ac388cf8a5bd8e562a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473276
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove from shellcheck excluded SC2121: To assign a variable,
use just 'var=value', no 'set ..'.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7dae1d73f0e276ef9e5a0cfa78a56227264c0a4d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473272
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use python3 when installing devstack.
Increase timeouts in order to tests pass in our CI environment.
Change-Id: I6b88e39f9a8f0b8aa255098dc62b881168777ec3
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This RPC method can be used to set cache size of
blobfs, in case a smaller or larger memory scale
is requred by cache pool.
Change-Id: I8046c7caeaa15c67825f86d14ae0b79395d51daf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't use shebang for bash's scripts that are not executable.
SC2148: Add shebang to the top of your script.
Change-Id: I4bd6868a55ec88ae1edaf0883c8600b65fcdcce2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Can only return 0-255. Other data should be written to stdout.
Change-Id: Idb8b387f438121e6b6afe62840ddee752872d7d7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2153: Possible Misspelling: MYVARIABLE may not be assigned, but MY_VARIABLE is.
Change-Id: I6c06b82bb8de0ad42162d8fe8ee6aabcfb9534b5
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to my check, I found that we should
umount /dev/loop200p2. The name of the dev used in the
start.sh and stop.sh is not same.
Then there an issue reported in the script:
umount /dev/loop200
umount: /dev/loop200: not mounted.
I think that this is an issue happens in our every
test. And it may influence the further test.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I10c460b4e7760f321fd1a1cd87caa69d2911037b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472514
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add to permanently excluded in shellcheck:
SC2164: Use cd ... || exit in case cd fails.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic8091de0cdc7bba441ea1715699ca5bd170ece59
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also add functions to convert it to/from string.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I6f7964d832c308b815150fff39eb3dc5c5ae5853
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471079
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Added RPC commands to register/unregister CUSE devices
to NVMe controllers:
- bdev_nvme_cuse_register
- bdev_nvme_cuse_unregister
Additionally two RPC now return CUSE device names:
- bdev_get_bdevs for namespaces
- bdev_nvme_get_controllers for controllers
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I69c4bf41ec8f78a7522894268a67dd733881712f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472211
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe character device implementation. This patch adds implementation
of IO producer using CUSE library. It allows to create nvme device
nodes in linux kernel for controller as well as for namespace and
process ioctl requests as usual from linux environment.
Both devices (controller and namespaces) are exposed as character
devices.
To compile NVMe CUSE module use "./configure --with-nvme-cuse".
Names for created CUSE devices can be retrieved using
spdk_nvme_cuse_get_ctrlr_name() and spdk_nvme_cuse_get_ns_name().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0fc9a9a1ef3c9c2b3112d07c2b4b1f8d49665ee1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2165: This nested loop
overrides the index variable of its parent.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Idbef5f5e11467e389c7b965bb394a71d2d0d2566
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2166: Prefer [ p ] && [ q ]
as [ p -a q ] is not well defined.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fb2fb0e790bbdd296b64673c301324632d7c37b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2167: This parent
loop has its index variable overridden.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I066f7fa856581377ee8370ebe9167841a18b0787
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2230: which is non-standard.
Use builtin 'command -v' instead.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1e535b44ea54999736206aeb3906ce3cf670bc21
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2115: Use "${var:?}" to
ensure this never expands to /* .
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I4a6beef338b7a3c496f1b74a0cdbbdff83403ddc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2103: Use a ( subshell ) to avoid having to cd back.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I474e11f5753c3482c7924548ab7c0183d4ac419d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
/etc/ceph/ceph.client.admin.keyring is used by
the liborados client, if keyring is udpated, we should
update this file.
If we see:
librados: client.admin authentication error (1) Operation not permitted
Usually, we should set the read privilge for the file.
Change-Id: I34967844a5d0578f740e601def4b0cbd297a95dc
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add rpc commands bdev_opal_lock_unlock, bdev_opal_new_user.
Admin can add new user for opal bdev created and the user can
lock/unlock the bdev by himself.
Change-Id: I9a1e360399617b5a039dc5353097ab525c7eb964
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471475
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix Python code for warning produced by pylint.
- C1801: Do not use `len(SEQUENCE)` to determine
if a sequence is empty (len-as-condition)
- W0611: Unused import * (unused-import)
- C0411: standard import should be placed before X
(wrong-import-order)
- C0411: third party import X should be placed before X
(wrong-import-order)
- C0412: Imports from package X are not grouped
(ungrouped-imports)
- W0212: Access to a protected member _exit of a
client class (protected-access)
Change-Id: I2c0e8379f962eb2957b428617836867b2e725aeb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This path updates ocf library to version 19.06 and also introduces
all necessary changes required to integrate ocf bdev adapter with
new version of ocf.
Summary of changes introduces with new OCF in ocf bdev:
- ocf_env.h increased limit for memory operations, changed behaviour
of strncpy to less restrictive, both changes are required to run new OCF
- ctx.c changed functions to new from new OCF
- added new cache mode "write only"
- added missed cache modes wa and wi to RPC scripts
- rewritten spdk_rpc_bdev_ocf_get_stats function to use asynhronus
ocf_mngt_cache_read_lock
- used new asynhronus ocf_mngt_cache_flush instead of waiting for request
- removed no longer valid filed - cfg->device.min_free_ram
- changed expected result in metadata_probe_cb
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: I83e4335e16600e4d22e6bb517931102de42d39e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468132
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2013: To read lines rather than
words, pipe/redirect to a 'while read' loop.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I01c0dcf045fc131ce0cfa672e5ede0b881a47406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When used mkdir with -p, -m only applies to the deepest directory.
Change-Id: Ibbc2dc47cdae82d38e3141c8a7df59ed709fe334
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Correct shellcheck rule SC2145: Argument mixes string and
array. Use * or separate argument.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I45102ead2e97cc1d6b11c21f269e58a235055c35
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove from shellcheck excluded SC2146: This action ignores
everything before the -o. Use \( \) to group.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I62549107516853d8394fff8bcb36584df9e39ac1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC1001: This \o will
be a regular 'o' in this context.
This warning is not actually present in any of spdk/spdk scripts.
Additionally clean up shellcheck exclude list.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia9a9ec9383df02702397072172830fb147effe81
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC1003: Want to escape
a single quote? echo 'This is how it'\''s done'.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib5175941178e4d1b46c3835a98d90d6dd427a035
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC1113: Use #!, not just #, for the shebang.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I77cc1bd3ca6817823bf6fabf82a2991d734cd824
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Add to permanently excluded in shellcheck:
^SC2001: See if you can use ${variable//search/replace} instead.
In some cases we need more complex sed substitution than only replacing string.
For example: test_stack=$(echo "$test_stack" | sed -e 's@;[^;]*$@@')
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3e997af5232d8b15518fd54528b2e51e75a19d8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2003: expr is antiquated.
Consider rewriting this using $((..)), ${} or .
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I98a677cce7a1ffdfa5e1cf417a128900fba64124
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470902
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2044: For loops over find output
are fragile. Use find -exec or a while read loop.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fd84ab60daab7c6971769ff4dee8a24d5d3e1bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470746
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1. Remove created dir name with "/".
2. Compatible with upper version of ceph-authtool without --set-uid, let it run as default.
3. Fix error on ceph 12.*.*
This is to fix issue #980 which blocks by ceph-authtool.
If there's still other issue, should append fix.
Change-Id: Icd7fb4177a75a731ae3d4d5fc51cef16eeab282f
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470915
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Quote to prevent word splitting/globbing,
or split robustly with mapfile or read -a.
Change-Id: I8d971216056580921ce07baa24e6ceaceffcceae
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Prefer mapfile or read -a to split
command output (or quote to avoid splitting).
We know the behaviour of commands that break the SC2207 rule.
They shouldn't invoke the shell's sloppy word splitting and glob expansion.
E.g. Code: stats=($(cat /sys/block/$dev/stat))
according to SC2207 rule could look like:
IFS=" " read -r -a stats <<< "$(cat /sys/block/$dev/stat))"
Stat file contains one simple line with entries separated by commas
so present code is enough to define statistics for dev.
Change-Id: Ia929d76461c9fcff425f69d2faf4405631e60239
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467325
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There was no occurrences in code that doesn't meet this rule
SC2231: Quote expansions in this for loop glob
to prevent wordsplitting, e.g. "$dir"/*.txt .
Change-Id: I9293459dd6bea401f675a7af379db25f48664f25
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This rule won't be used in bash scripts and will be added to exception list.
SC2223 - This default assignment may cause DoS due to globbing. Quote it.
Change-Id: I0d4b0bc697e42bb4bc1d77db5b28a469cdb887ec
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This RPC method will mount blobfs on bdev to one host
path through FUSE. Then on the host path, user can
directly do some file operations which will be mapped
to blobfs.
Note:
* The FUSE mount of blobfs can be umounted directly by
SHELL umount or fusermount command.
Change-Id: I7c322d978b39bbc7255fced345a749ad5bfa7077
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This case is not specified by getopts.
Change-Id: Id292af4f926856af849d2f97fd0a570e4505832b
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2043: This loop will only ever
run once for a constant value. Did you perhaps mean to
loop over dir/*, $var or $(cmd)?"
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If8de0a81ea889a04b8fea646fedc0a2cfe49d5f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470737
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There was issue with failing rbd_autotest on vm fedora29.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic8db722903d483d288b62c8b7c54671a4142be01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470855
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added Initiator configuration option to point to the
fio source directory used when compiling SPDK with the --with-fio
option and run SPDK test with the fio plugin.
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Change-Id: I097cb17691a72d7c2a0e198dccd12cf3d1c3474c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In a couple of docs and a .py file, saw while reviewing name changes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6a8b579ca692cdf6df1024e42eee76de5bde1227
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use semicolon or linefeed before 'done' (or quote to make it literal).
Change-Id: I90c01e643fae41dd9961f2314a076a0bac1e6aff
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466904
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2039: In POSIX sh, something is undefined.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I473e9307d909695184969563ef082720fa593759
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470732
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2035: Use ./*glob* or
-- *glob* so names with dashes won't become options.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If41cc6c4571b78ab7533a8156239bc879fab0216
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470731
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2031: var was modified in
a subshell. That change might be lost.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I17ec872ee5571089bbe40e8d51b06d70be70feb2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470729
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2030: Modification
of var is local (to subshell caused by pipeline).
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3bcf6857a9fa5edfcdfa1b7f13eb704ac552d3f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470645
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following test/blobfs/mkfs case, add it as one RPC
method to let build a new blobfs on given block
device.
Change-Id: I0ffbb1add95dfbc8655e0238ed6f3cd519dd945b
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add module blobfs_bdev as a general module to simplify
the operations of blobfs on bdev. Then its functions
can be utilized by other libraries or apps.
blobfs_detect can be used to detect whether there is
one blobfs on given bdev.
Change-Id: Ib425574816061dc945fb652b539f791a44097a43
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Variable was used as an array but is now assigned a string.
Change-Id: I79e59d80be96657a9c2fc66f9d205458f9db67b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Check exit code directly with e.g. 'if mycmd;',
not indirectly with $?.
Rule disabled in test/pmem/common.sh as behaviour
may differ depends on bash version
Change-Id: Ied4c5dfb09e52c5db08becf1ad69a29a1bda426b
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC2015: Note that
A && B || C is not if-then-else. C may run when A is true.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie8ac6c83dc2d79a06e3b8ebb6ec8ebfec4fa7561
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470129
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2018: Use '[:lower:]' to support
accents and foreign alphabets.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If11d20a36419366adafc19f173ebbec60b2bea77
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470109
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2019: Use '[:upper:]' to support
accents and foreign alphabets.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9fbaa22ee39d52d5d3a9397ad007b7df295b49b3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469990
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2022: Note that unlike globs,
o* here matches 'ooo' but not 'oscar'
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie201a8401c5c501e1fff3d0eb71409163893768e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469983
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2094: Make sure not
to read and write the same file in the same pipeline.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fba44d7dc677dbfb4a7964481a7f0661a733dcf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469979
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add to pernamently excluded in shellcheck:
*SC1090: Can't follow non-constant source. Use a directive to specify location.
*SC1091: Not following: (error message here)
We don't want to put commnets in lines where we refer to some sources.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ida7a8924901649d270ed5384677ee23f206da9f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Correct shellcheck rule SC2088: Tilde does not expand in quotes. Use $HOME.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iea1eeaafc414c153f60634aaa39b0ab3272c9c48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2059: Don't use variables in the
printf format string. Use printf "..%s.." "$foo".
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibe44ed313cc31ddc346752de19ed4759c207bb01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC1004: This backslash+linefeed is literal.
Break outside single quotes if you just want to break the line.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b872fa3c66685c1e8e7989f7b3b74a9e4f35325
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove from shellcheck excluded SC2048: Use "$@" (with quotes)
to prevent whitespace problems.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9d4b538c442450c6743f749016be4811981cff4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466903
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Remove from shellcheck excluded SC2026: This word is outside
of quotes. Did you intend to 'nest '"'single quotes'"' instead'
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic71c464de9dccebe9ead9c47b5cdb15d8fcc025b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466902
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The = here is literal. To assign by index, use ( [index]=value )
with no spaces. To keep as literal, quote it.
Change-Id: I14cada0e8c132286959aa47a1d37ede5e025d85f
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also update the changelog for the previous few changes.
Change-Id: I79ac330b4992ccc3e41fd1643b09128c6de6c86d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the in tree applications don't really support these RPCs, keep
them out of rpc.py. We can add them in after the applications have been
modified to support that functionality.
Change-Id: I7aae2c623b6da48374fe53f8b9471b08e5f0af7a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This rule doesn't appear in scripts.
SC2195: This pattern will never match the case statement's word.
Double check them.
Change-Id: Ie3cabd58639ca733b750fdbc3ae3d476f083b792
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469187
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2192: This array element has no value.
Remove spaces after = or use "" for empty string.
Change-Id: I5228df2ac292786a3a62aa06ffb6cd31b7d3b6c4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467861
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Arrays implicitly concatenate in [[ ]].
Use a loop (or explicit * instead of @).
Change-Id: Ib3ac2c65207dfc30aad6117cc4996cdc105f5079
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
used for creating a new spdk_nvmf_tgt structure in the application.
Change-Id: Ib0182ea6d935b84b4fe4fcad79e173cb46859669
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds an option to spdkcli.py to allow connection over a tcp
via a host address and port. These options match the format
that exists in rpc.py
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I7e9e1c376546dd765ffd6f4f4db88e193e9aa0ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467844
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use var=$(command) to assign output (or quote to assign string).
Change-Id: I4067db46697c32f24e0b4df7d573929ee75757a7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add SPDK dependency installation instructions for ArchLinux OS.
When possible dependencies are installed directly via pacman
package manager. If not available - use AUR and makepkg.
One exception is pmem dependency which is installed using
Github sources, as it seems that AUR repo is not frequently
update.
Additionally for pmem installation ldconfig needs to be
updated manually, otherwise it will break fio installation
(if done with vm_setup.sh) which detects pmdk headers, but
cannot find libraries on runtime.
Change-Id: Ib9045ba55b10c2b671e01b48dda8ec439899bc06
Signed-off-by: Kay Bouché <kay-b@live.de>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/433913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add Arch Linux option to our Vagrant scripts.
We will probably need this for nightly tests against
latest versions of software we depend on.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I2dd1d69cbb286625343fd5e70ace0d8da1218825
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
We want to use Vagrant scripts in our CI.
It will allow us to remove statically configured
virtual machines and spawn new instances dynamically.
This patch allows us to use custom version of emulator
instead of preinstalled on host.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iff79cd28d4d5b21fcf327db455ef060182f0f4ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The unit test mock macro function doesn't mesh well with the scan-build
static analysis tool. So we need to reset cc to the user provided value
or default before running the unit tests.
Change-Id: Ib636f6e396b09f9bf1cb8f930e6befa56ce99848
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466816
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Invalid flags are not handled. Add a *) case.
Change-Id: Ib3e0d978ed9a131a5ab23a2bc5013bbe0698d1be
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467268
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The dependencies between vhost and rte_vhost were not added during
earlier changes. This change moves the rte_vhost directory up to the
level of the other libraries and adds the proper dependencies for when
it is linked.
Change-Id: I089de1cd945062b64975a0011887700c0e38bb0f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
