Roce_ena object is already a string so you cant use decode() on it.
Added more log information
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I93f56ba0c7a562afd86a2bbb961f961ef30a2ae0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17293
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Parse the config file for "irdma_roce_enable" flag to load irdma
driver with ROCE network protocol enabled on SPDK Target and
SPDK Initiator machines.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: If81c0ec494c13a561c6c780105ee4caba053001a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done to calculate readings with better precision and fix
the case where calculation of total reading from given entity would
fail if it was < 1 (as bc drops the leading 0, leaving e.g. .42).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I68f2df89c340dba28d15c4aaac3e106c9f8057d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16586
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace spaces with undescores for each sensor name
to avoid dealing with filenames with spaces later.
Change-Id: I2115cc14a15a53a7d92a7dae5cb6d1bfa7fb4402
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow adjusting number of CQ entries for SPDK
transport layer.
When testing with RDMA iWARP protocol it is
neccessary to adjust the number of CQ entries
manually as iWARP does not support CQ resize.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I03c1a3f20fa64a90995428e693c57b48b0a06bcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16509
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do not overwrite extra_params when io_uring fio
engine is selected; append number of poll queues
to params list instead.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5609e3ad4009df74bc2b02b5c5407548d1d69f3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16507
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For each NIC reduce number of configured ADQ tc
entries. Use only these ports which are actually
associated with NIC's IP address instead of using
all port numbers in use by Target's subsystems.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I90934db594be0412b0fb7fb2b26684733df7711a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16379
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add all subsystem ports to created traffic class
instead of just one hardcoded port number.
Change-Id: I702948958213eb920e56db4593f26f0ce122a8c0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15596
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move ADQ traffic classess configuration after
Target has been configured. ADQ TC configuration
will rely on information generated by configuring
the target (e.g. port numbers).
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5f5c438525d742ceab473c28afdb68d39ff019b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15595
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initial ADQ configuration in script was created based
on "Nov 2020 ADQ with SPDK Configuration Guide".
Update using latest June 2022 guide version.
- Channel inline flow director configured using
"devlink" for each TC separately instead of
using ethtool setting
- Disable channel packet inspect optimize priv flag
- Enable busy poll private flags
- Run NIC IRQ affinity script again after creating
TC's
- net.core.busy_poll and net.core.busy_read now both
set to 1
- Set acceptor_poll_rate when creating transport layer
Change-Id: I05b2d0aa2ddd5fc249889fb5e5d6118963367b36
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15584
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The configuration is generated based on existing host's NUMA
topology (as seen via sysfs) instead of a total number of cpus as
it was done before. New logic attempts to load balance VMs and
their cpus based on nvme drives' NUMA location. If there is no
enough cpus left under the target node, all remaining nodes are
checked. For the sake of the performance, cpus are not mixed
between different numa nodes.
Disk map is created by mapping VMs to existing nvme drives
based on their NUMA location. Extra VMs are assigned in bus
order of the nvme drives.
SPDK cpus are split by matching the VM-to-nvme NUMA ratio.
Static list can be defined as well to override this behavior.
https://trello.com/c/HSoRtQkO/401-deprecate-vhost-performance-python-helper-script
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia63c6f9a472a685d252efd110eaba7b114a87d2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Recent changes done to iobuf and accel framework
require us to adjust iobuf pool sizes when running
tests with high number of NVMe-oF subsystems.
Change-Id: I72ce6e71446bea0af44bdad6258e7d7f5d765656
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Each fio job section will get unique CPU cores
assigned based on the number of numjobs value.
In case of high number of fio jobs or high numjobs
parameter value we might eventually run out of
CPU cores to assign. Allow regenerating list
of available CPU cores. This allows to run the
test, but as a result CPU cores might be shared
between fio threads.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I69b1713e640d9343d68b26317f4caccdcec3cddd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16240
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Allow user to specify the way IRQ alignment for
network interfaces used in test should be done.
Change-Id: Ib835d2ac2bc0c7b79474e617de32b96a483e436b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15737
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fio "numa_cpu_nodes" parameter (which tells fio
which NUMA node to use to pick cpus for the job)
seemed promising, but manually adjusting
"cpus_allowed" seems to have better results.
Change-Id: I113566ad0dd1d32fb5a1e989725b257e3ccff4c0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14842
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The warning appeared during Fedora 37 VM image testing
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2ceff22d08614fec0c27b9931d71753f57cf99bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make sure all attributes are initialized in both classes.
If something is not supported or works a bit differently -
move it to children's class method.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I963ef1e9fe4288992a15f65671c1b85e8e7f7fd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14882
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4183549cc55b437a435fb024c4a9d234c456ccab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
"num_cores" is described as optional in readme file.
For SPDK Initiator class it was required instead of
optional, and Kernel Initiator did not even take this
parameter into consideration.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Id6874ee8614aefdd9ee4a55dd200a6deab504b7a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Find matching SAR and PM script output files, parse
them and put calculated average from accross all
workload iterations into final CSV with aggregated
results.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9d3c445941e54eefbe93dd47d152d2ede22c9560
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Wrong key was used to assign value from json config.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3814b385824b435ae39cdf0a47cca42735873e86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15757
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This should make it easier later to group matching
result files when parsing results.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8d3c5641c8b71b6027e1f200ce53426a46e5234d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15466
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Run additional measurements (PM, SAR, PCM, BWM-NG, DPDK mem)
for each configured test run.
For example: until now if fio parameter "retry" was set to 3
fio would run the workload 3 times, but additional measurements
would only be done for the first run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5a8aaa8eeb28f2a24f47a41650f9e2bd14a298dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15380
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enable PM measurements by default.
Delay time and sample count variables are now taken
from fio ramp_time and run_time parameters, while
sample interval is hardcoded to 1 second.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibc08c690a8c8eea7591a5553b2478283c7574eec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15520
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Group and move all restore_* functions to classes
stop method.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I92cde5865a28343dbace702f54e4e06e4c2ba6cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14855
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enable PCM cpu, power and memory measurements as
default and make them run during fio workload.
Change-Id: I4d42cf9df8385bfaa3b5e8fac59283ef8be0e98b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
bwm-ng interface bandwidth monitoring is now enabled
by default. Samples are captured every second during
fio run_time duration.
Change-Id: I868f01d23e648e855161e6711236a68dcff8ff5a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Enable SAR CPU measurements by default.
Delay time and sample count variables are now taken
from fio ramp_time and run_time parameters, while
sample interval is hardcoded to 1 second.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icf2866820250dd6bbc5619b2777f6fe139f2a588
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Groupt variables used for enabling addtional
measurements together for better readibility.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If61de427294fea6ae9a2d5c53f74b6c9e5aa3e6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Use "allowlist" and "blocklist" options in JSON
configuration file to specify which NVMe drives
are OK to use when setting up Target side. If no
list is specified the user can continue with the
test and use all available NVMe drives by passing
"-f" option when running the script.
Previously the default behaviour was to use all
NVMe drives available in the system for test, which
could cause data loss on those drives.
This is a failsafe primarily aimed at KernelTarget
class, as SPDKTarget is already safer to use because
of existing checks in "setup.sh" script which must
be run prior to executing NVMe-oF performance test
script.
Change-Id: I5ff93672a92cb09f2aef8355542ad197d96e14e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14854
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
"log_print" was removed in previous commit and
switched to Python's logging module instead.
This line was probably a result of a faulty rebase.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6bbb2c37a947d0169689a014b2e110884bb70fdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
They were missed by the initial set of patches which introduced this
header as a mandatory one across different types of files.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I3f9b37d41298c843e1648e72fe8593768ccd37e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)
For intel copyrights added, --follow and -C95% were used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2ef86976095b88a9bf5b1003e59f3943cd6bbe4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
CalledProcessError was removed from common.py and
not moved to run_nvmf.py in:
https://review.spdk.io/gerrit/c/spdk/spdk/+/14740
Change-Id: Ib35c60aa779711f40c6fda990c721491ae000b43
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This uses RAPL's powercap interface under sysfs. The alternative is
to use MSRs directly, but with this we don't have to bother about
different cpu models, etc. as kernel does that for us here.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I91ed5d67edf2669b9d7b271bbc02ecc61a6a3ea2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Run collect-bmc-pm as a thread with execution time limited by count
and interval. This aligns it with the way how other tools - sar,
pcm - are used during the test.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I48fa4ea1be69f9dcae71bf01c3214102ab329bac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These functions are used only by SPDKTarget class, so
move them out of common module.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I489443f76fbdf4cb3def19a557f4a953a098bbce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14853
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
This function is used only by this class, remove it
from common module.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6cb01e68f0005ddc1604ff4014c6b346da3a970e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Results parsing is not Target specific. Result
files get copied from initiator the system where
the script is run. In future we might want to
add a feature to work with remote Targets which
would make the parse method fail.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I215391e0ff7a3ac0881f5a092513dd087fbd2e2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Remove unused imports and unused function.
Move nvmet_command function to Kernel Target
as it's specific only to this class.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I30699ca1d8541ff2f57ea609e5caf0304feb4282
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
