`rpc_bdev_lvol_resize` and `rpc_bdev_lvol_create` can now use size
in MiB instead of `size` in bytes. This change make param `size`
deprecated and using both `size` and `size_in_mib` return error.
Since `bdev_lvol_resize` and `bdev_lvol_create` use size in MiB,
name of param should reflect it, previously used param `size` is
positional therefore there is no need to keep it as deprecated.
This patch fix issue: #2346
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ibbe2c056bb63d9f82dee91c87fdd501ce441d5f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16901
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change the way we generate UUIDs to use uuid_generate_sha1()
from libuuid.
Fixes#2788.
Change-Id: Id750a7de74fb37bc3ab3ab06b3254b49d73f4be3
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
The following patches will add mutex for bdev_nvme_delete() to improve
handling race conditions. This refactoring make such change easier.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8971684a708bce89872f08f75db86eb3b723f380
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16821
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If alternate paths and an active path are treated separately in
_bdev_nvme_delete(), it will be much easier to protect a path list
from delete operation by mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie3bed095fd92b80c0487ef7b136953ad03a174eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16820
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out path deletion operation for one nvme_ctrlr into _bdev_nvme_delete().
_bdev_nvme_delete() traverses all remaining nvme_ctrlrs even after one
nvme_ctrlr was successfully deleted. To remember the successfule
deletion, use two return value variables, rc and _rc. For _rc returned by
_bdev_nvme_delete(), copy _rc to rc if _rc is zero, return _rc immediately
if _rc is not -ENXIO, or do nothing otherwise.
This improves the readability and makes us easier to add more changes.
Additionally, for _bdev_nvme_reset_io(), it is simpler to overwrite rc
to 0 if rc is -EBUSY rather than to return 0 if rc is -EBUSY. This is
very small change and hence done together.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I57eafd22918c8c976b9c51bedb9e4369976c1d5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16819
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch wants to use _bdev_nvme_delete() as a function name.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iba103868e74795bf42c443a377c77e9c073329fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16818
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This improves the readability and makes us easier to add more changes.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I55d7925d70f2a204f65a81f3fc44cf96b69c3ebe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These functions:
_vbdev_lvs_grow_examine_finish
_vbdev_lvs_grow_examine_cb
_vbdev_lvs_grow_examine
are almost exact copies of:
_vbdev_lvs_examine_finish
_vbdev_lvs_examine_cb
vbdev_lvs_examine
Remove the duplicated grow functions. Factor out the common entry point
into _vbdev_lvs_examine() which accepts a callback to perform the
required action (spdk_lvs_load or spdk_lvs_grow).
Change-Id: I9805f29e22812051608873207401e3786dab7103
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16942
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove _vbdev_lvol_examine_close_cb() because it is identical as the
code at the end of _vbdev_lvs_examine_finish().
Remove the INFOLOG message because it is redundant (there's an ERRLOG
just before) and inconsistent with the lvolerrno != 0 case, where there
is no such message.
Change-Id: I8488a8b5fcbaf1895f4953081d98bc13f82be221
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the past, we didn't use the distinction between logical block size
and physical block size. Now it's possible to optionally set the
physical block size to be different then logical block size. It's useful
for NVMe 512e Advanced Format tests.
Change-Id: I1b596da471031ee90dafc6ba6276cebf769b5ea2
Signed-off-by: Panfil, Wojciech <wojciech.panfil@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16793
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the past we didn't use the distinction between logical block size and physical block
size in null bdev. Now we can optionally set the physical block size to
be different then logical block size. It's useful for testing NVMe 512e
Advanced Format scenarios.
Change-Id: Ib3713af9a4d0ce7fd322170b4d87100cfc91a103
Signed-off-by: Panfil, Wojciech <wojciech.panfil@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16792
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When bdev_rados_cluster_init encounters an error, it shuts down the cluster
before returning, but since the pointer is still set, bdev_rbd_free will
attempt to shut it down again, which causes a crash.
Therefore, set the pointer to NULL after the first shutdown to indicate
that the cluster object does not exist anymore.
Change-Id: Ie403471e8aba881cb6380e74bd1a4ca8d67cbc68
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16203
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The spdk_bdev_ext_io_opts structure is used to pass extra options when
submitting a bdev IO request, without having to modify/add functions to
handle new options. Additionally, the structure has a size field to
allow adding new fields without breaking the ABI (and thus having to
bump up the major version of a library).
It is also a part of spdk_bdev_io and there are several reasons for
removing it from that structure:
1. The size field only makes sense in structures that are passed
through pointers. And spdk_bdev_ext_io_opts is indeed passed as a
pointer to spdk_bdev_{readv,writev}_blocks_ext(), however it is
also embedded in spdk_bdev_io (internal.ext_opts_copy), which is
also part of the API. It means that each time a new field is added
to spdk_bdev_ext_io_opts, the size of spdk_bdev_io will also
change, so we will need to bump the major version of libspdk_bdev
anyway, thus making spdk_bdev_ext_io_opts.size useless.
2. The size field also makes internal.ext_opts cumbersome to use, as
each time one of its fields is accessed, we need to check the size.
Currently the code doesn't do that, because all of the existing
spdk_bdev_ext_io_opts fields were present when this structure was
initially introduced, but we'd need to do check the size before
accessing any new fields.
3. spdk_bdev_ext_io_opts has a metadata field, while spdk_bdev_io
already has u.bdev.md_buf, which means that we store the same thing
in several different places in spdk_bdev_io (u.bdev.md_buf,
u.bdev.ext_opts->metadata, internal.ext_opts->metadata).
Therefore, this patch removes all references to spdk_bdev_ext_io_opts
from spdk_bdev_io and replaces them with fields (memory_domain,
memory_domain_ctx) that were missing in spdk_bdev_io. Unfortunately,
this change breaks the API and requires changes in bdev modules that
supported spdk_bdev_io.u.bdev.ext_opts.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I49b7524eb84d1d4d7f12b7ab025fec36da1ee01f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also deprecate the existing spdk_nvmf_request_data() API, which is
incompatible with iovecs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I44df8ff30a431873a0c2f34b0cdb58df858fd7e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16200
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It has been implemented in commit 56e2d632ce to reset all nvme_ctrlrs
of a bdev controller sequentially. Update the log.
Change-Id: Id87bf99d7e269c8ad0d6b2576e2329455601ec55
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
With the introduction bdev module claims v2, existing consumers should
transition off of v1 claims. This transitions blob bdevs from v1
exclusive writer claims to v2 read write once claims.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I1884585a540fa17ee341430e03de3c4f5d35322b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16168
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used hardcoded value set by bdev module, however
this value might be changed, so get a real value
from iobug config
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Id15b602f699f3dd63aeff11fb063bb62c384663d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16601
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. Replace one of the
remaining cases in this patch.
rpc_blobfs_detect() uses boolean response for not only true but also
false, but it had a memory leak bug. Fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iaff21115282f638038345daa986b5c743ba9a3ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16621
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. However, this pattern did
not become established and new bdev modules used
spdk_jsonrpc_send_bool_response() with false.
Once again, replace remaining cases in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie8858bc8ff7c36bc3a829977044a91d459db76f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16555
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe bdev module has been refined since the bdev_nvme_apply_firmware
RPC was added. It is enough to open any one NVMe bdev even if one NVMe
controller has multiple namespaces. Hence, let's remove
spdk_bdev_first/next() calls from rpc_bdev_nvme_apply_firmware() rather
than replacing these by spdk_for_each_bdev(). Additionally, not only
spdk_bdev_close() but also spdk_put_io_channel() and
spdk_jsonrpc_send_*_response() should be done on the original thread.
Hence, redirect to the original thread always when a NVMe command is
returned, and rename firm_ctx->thread by firm_ctx->orig_thread for
clarification. orig_thread will be better than comment.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I90b1986584b3926980fd265e4fded194eb5a2d00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16541
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is enough to embed an instance of rpc_apply_firmware structure into
firmware_update_info structure.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I41a480a0b8cd56f4b537512d5f83c5cbd5eee718
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Previously, bdev_nvme_apply_firmware() used a temporary character array
to reduce the calls of spdk_jsonrpc_send_error_response().
Change these to call spdk_jsonrpc_send_error_response() directly.
This will simplify the next patch to replace spdk_bdev_first/next() by
spdk_for_each_bdev()ss.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I87ffc9416232dcaba30202ebbe0cb4b185a9563d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Support OCF is now winding down and will not see further updates.
Change-Id: Ica2026d3a9ad13daf677fcce2b7974eb333971fc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The gpt bdev module has an off-by-one error. When it
calculates the size of the partition, it simply does
"end - start", when really it should be "end - start + 1".
We cannot just fix it by changing the math here, any
consumers of the partition may have put down metadata
on the partition based on the old size.
So instead add a new SPDK partition type. SPDK will keep
the existing off-by-one behavior when it finds the old
partition type, but will use the correct math when finding
the new partition type.
Fixes issue #2801.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48eb48c781f1968b59e52b4477ca45e9c81eac11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is required when volume is attached via different storage boxes
for example while migrating it.
Signed-off-by: Gili Buzaglo <gili.buzaglo@kioxia.com>
Change-Id: I680c781ae5de078972d6aef547804d60fff3c643
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16407
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was added during debug/development and
was not deleted by accident.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I146748151623a3ea4808c7b5cc34085d30ca81b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16388
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
directly
This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.
Unit tests for the new module will follow in a separate patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
ublk backend could support ublk driver with kernel. Specify
configuration parameter to start it up.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I55e7d757e04315b25e9bfab5fdcbb6621be3e29e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15680
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The mlx5 accel module supports crypto operations.
Data buffer is split into `block_size` chunks and each
chunk is enrypted individually.
mlx5 library contains some utility functions that will
later be used by other libraries, this lib will be
exntended later.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iacdd8caaade477277d5a95cfd53e9910e280a73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All DPDK related code is removed, handling of
RESET command was sligthly updated.
Handling of -ENOMEM was updated for cases when
accel API returns -ENOMEM
Crypto tests in blockdev.sh were extended with more
crypto_bdevs to verify NOMEM cases - that failed
with original vbdev_crypto implementation
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1feba2449bee852c6c4daca4b3406414db6fded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Attempt to send any queued writes even if the socket is in a group. This
will not work if there is a send task already outstanding.
Change-Id: Icc0b5884e3d247042194ad26b30340ceb824886c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add RPC bdev_nvme_get_path_iostat to show I/O statistics for IO paths
of the NVMe bdev.
Change-Id: I22e5ad112d5cfa6d96cf246dcd0e511ae71dc839
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Handling for scalar dst buffers were removed in 1866faffe, and all
buffers are now described by iovecs. The dst field was removed from
spdk_accel_task, so we also need to remove any references to that field
from dpdk_compressdev. This patch fixes the build with compressdev
enabled.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I21fbbb45a15e7250944753e445dede7d586bf35b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16349
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We had it for compress but simply didn't think of a use case for
decompress. During the develpoment of the compressdev accel_fw
module it was discovered that compressdev does indeed provide the
uncompressed length on completion of decompress and the reducelib
uses it. So, add it here.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2f6a8bbbe3ef8ebe0b50d6434845f405afa7d37d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
From an earlier comment on the original patch that introduced the
module. Stop using the thread to associate the device_qp and
simply link it into the chan.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib55979247d9bdacdc868bdb9dea97e1941e1e8ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is the port of the vbdev compress logic into the accel
framework. It includes just one enhancement, to only fill each
mbuf in either src or dst array with max "window size" param to
avoid QAT errors. Note that DPDK ISAL PMD was not ported as we
have native ISAL compression in accel now.
Note: ISAL w/DPDK is still built w/this patch, that can't be
removed until the vbdev module moves to accel fw as it still
depends on DPDK ISAL PMD.
Follow-on patches will include addition C API for PMD selection,
this patch just gets equivalent functionality going. Upcoming
patches will also convert the vbdev compress module to use the
accel framework instead of talking directly to compressdev.
More patches will also address comments on vbdev common code
that addressed here would make the review challenging.
This patch also fixes a bug in the ported code that needs to
be fixed here to pass CI. Capability discovery was incorrect
causing all devices to appear to not support chained mbufs,
with the mbuf splitting code this is important to get right.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f526404819b145ef26e40877122ba80a02fcf51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We will be creating a new accel module for DPDK
compressdev. We can heavily leverage all of the
code from the existing vbdev_compress.c file. So
just copy that file exactly to start, and then the
next patch will contain only the deltas for removing
the bdev/reduce plumbing and adding the accel
plumbing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4f6ca1c2dad92eb8dd38b351602b65b8cb4ee4e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Mellanox Build Bot
We may need to process multiple events to get all of
the events associated with a newly published service,
so a 1 second poller is actually a bit too long since
we will only get one event per poll iteration. Shorten
it to 100ms instead.
It doesn't appear there is any easy way to use the avahi
API to help with this, maybe we could have some context
variable used to detect if an event was processed or not,
and call avahi_simple_poll_iterate() multiple times if
necessary. This might be something worth investigating
in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifea7a99dc8b8b501392e29276b20528a873b1ae1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16327
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make vbdev_crypto_destruct() return 1 to signal that program
execution should wait for spdk_bdev_destruct_done() function,
which is added inside _device_unregister_cb().
This change is related to _vdev_dev_get() not being able
to find the devices, when called from _cryptodev_sym_session_free(),
as it uses device driver name, which might already be freed.
This occurs only during bdev module finish, when crypto bdevs
are being unregistered and vbdev_crypto_finish() proceeds to
call bdev name deletion without waiting for the unregister
callbacks to complete, which ultimately results in reading
freed pointers.
This only happens when code execution takes path for DPDK 22.11+.
Change-Id: Id9a43d07c90aef7a82867383fd77354ac521a3e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16290
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently delete_crypto_disk() calls spdk_bdev_unregister_bdev_by_name()
and immediately after exiting that function, it proceeds to bdev name
deletion. This causes callbacks triggered by above call to run with
references to bdev names that are partially unavailable due to free()
functions in vbdev_crypto_delete_name().
Add an intermediate callback that will call vbdev_crypto_delete_name()
and then the original callback that was sent as an argument to
delete_crypto_disk(). That way we are sure that bdev name deletion
is performed right after bdev unregister.
Change-Id: I483ce5c3c63596f54d44220ca61c5e97c3807faf
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
