We need to keep track of the shadow doorbell buffer locations, and make
sure to re-initialize on resume.
Co-authored-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If3ba456fb35f6f6199e4ff14cec1aad96775f71a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
process_blk_request() accepted spdk_vhost_blk_session argument
which is specific for vhost_user. In preparation to making
this function usable outside of vhost_user, replace this field
with struct spdk_io_channel and spdk_vhost_dev.
For this purpose vhost_user_process_blk_request() was created to
translate from spdk_vhost_blk_task to the generic arguments.
to_blk_dev() was moved further up so it can be more commonly used
throughout the file.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie61a1ae2a615c4f1a95601e533b9eec51998cd07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the qemu virtualization environment, when the virtio driver of the
windows image is upgraded to virtio-win 0.1.185, and virtio uses
legacy mode. In the negotiation stage of vhost, qemu's host_features
will enable VIRTIO_F_ANY_LAYOUT, and guest_features will also enable
this feature, because qemu's feature is a superset, so the feature
will be passed to the spdk side through the set feature process,
which leads to "VHOST_CONFIG: Processing VHOST_USER_SET_FEATURES
failed. VHOST_CONFIG: vhost message handling failed.", so we enable
this bit for spdk vhost.
Signed-off-by: suhua <suhua1@kingsoft.com>
Signed-off-by: lizhaoxin <lizhaoxin1@kingsoft.com>
Change-Id: I27323bf5a03dce774c8a74cfb070ddd43be05534
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12300
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There were a couple of places not using the standard formatting for qid
still.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If96c3f6d762128b0f274e2c4e9eebf4e80e35139
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds an extra spdk_thread_send_msg() call to destroy a qpair
to make sure that it isn't freed from the context of a socket write
callback. Otherwise, spdk_sock_close() won't abort pending requests,
causing their completions to be exected after the qpair is freed.
Fixes#2471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia510d5d754baccca1e444afdb10696ab9b58e28b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Now controller initialization with RDMA
transport is fully async
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I26e857740d3137d0b0e987facc81fc5f6ef81f2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10756
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Transport specific qpair_abort_reqs() set SC to SC_ABORTED_SQ_DELETION.
However, nvme_qpair_abort_queued_reqs() set SC to SC_ABORTED_BY_REQUEST
even if its call is not requested by the upper layer.
Change nvme_qpair_abort_queued_reqs() to set SC to SC_ABORTED_SQ_DELETION
for consistency.
nvme_qpair_abort_queued_reqs() is used to abort queued requests that
were sent while adminq was connecting. SC_ABORTED_SQ_DELETION will not
be so bad even for the case.
This change is required for the NVMe bdev module to be resilient for I/O
error. The NVMe bdev module does not retry I/O if SC is
SC_ABORTED_BY_REQUEST.
SC is set to SC_INTERNAL_DEVICE_ERROR if a request is failed to submit
to qpair by a generic qpair layer. We can change it to
SC_ABORTED_SQ_DELETION as well but we keep this for now.
SC_INTERNAL_DEVICE_ERROR is also retriable for the NVMe bdev module.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7d8d5e97b222fe9275afc4fed024c1654c9579a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12121
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As per the NVMe specification, a host can identify two areas of guest
memory: one of which is used for the host-written doorbells, and one of
which contains event indexes. The host writes to the shadow doorbell
area, but also writes to the controller's BAR0 doorbell area if the
corresponding event index is crossed by the update. This avoids many
mmio exits in interrupt mode, where BAR0 doorbells are not directly
mapped into the guest VM, with greatly improved performance.
This isn't a useful feature in BAR0 doorbells are mapped into the VM, so
we explicitly disable support in that case.
NB: the Windows NVMe driver doesn't yet support this feature.
Although the specification says that the admin queues should also engage
in this behaviour, in practice, no VM does, so have to include some
hacks to account for this.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0646b234d31fbbf9a6b85572042c6cdaf8366659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
probed
This can cause a mismatch of kernel vs user driver and isn't allowed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9c572ea1fa1da89d7b41e31ab4719eec719fb50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10588
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The only place a batch can be created is by assigning it to the channel
now, so this isn't a mistake that can be made and the checks can all be
removed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I915edb4f212c0751396554655ffe95ae3bb20cd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11538
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This effectively means there is only ever a single batch being build at
a time, which simplifies a lot of the APIs.
Change-Id: Ifd66cd1ce6f6f0abe2011528dd862c5324213658
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11223
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This lets us use it more widely.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9c67be19020677fab3eafe05c1e0f91c3d04611d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The value of ack_timeout is calculated according to
the formula 2^(transport_ack_timeout) msec.
Signed-off-by: zhangduan <zhangd28@chinatelecom.cn>
Change-Id: I5a938635d70693ddd405fa5907555bb745b4df0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12215
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reduces a lot of casting.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibc04f422858642d0e20c9b020bb6c5d1b70256fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11534
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
When a qpair is disconnected, any outstanding zero-copy requests are
freed to release their buffers before the qpair gets destroyed.
However, if there is a PDU being sent to the host as part of this
request (e.g. C2HData/R2T), we need to wait until that write is done
before freeing the request to avoid freeing it twice.
Fixes#2445
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2a6e82f26a4f011dfd18c55c821e9039de7e584a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12255
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes the flag indicate whether there's an outstanding PDU write
for a given request. Additionally, it reduces the number of places we
need to update this flag.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id7e587f84955b096c46bfbf88d4dd222214d4a6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12254
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make it possible to have some common handling in request's PDU
write completion.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icaff38da0e47dd93327e3d8f09edd9fdba8f532e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12253
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When an request using zcopy is completed, it might have an unreleased
zcopy_bdev_io attached in three cases:
1) the request was a read,
2) the request was a failed write,
3) the qpair is being disconnected.
The last case was missing from the assertion.
Fixes#2425
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5cbeaa198a1fd878c98caf148a0bc47060e35bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12263
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that IO qpairs can be created asynchronously, we need to make sure
that all the create IO CQ/SQ commands can be executed simultaneously.
It is pretty common to create multiple IO qpairs at the same time, e.g.
adding an NVMe bdev to an nvmf subsystem will create an IO qpair on each
poll group. In that case, if the number of cores exceed the size of the
admin queue (actually it can be even lower due to outstanding AERs), we
might run out nvme_requests on the admin queue.
The chosen minimum value for the admin queue size, 256, should be enough
to cover most cases.
Fixes#2465
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I55c59aef64f3fdb33f7b4824d3e9beb403602633
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12270
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The RDMA transport can disconnect qpair asynchronously now.
Previously, we tried to release the resource of the qpair after disconnected.
However it did not work because it was done when deleting the qpair.
The admin qpair was not deleted in a ctrlr reset sequence.
This patch tries to satisfy the same aim again but by a different way.
Previously, we released the resource of the qpair before starting
actual disconnection process. This patch release the resource of the
qpair after the qpair is actually disconnected.
The related patches are:
b9518a5540eb09178a59
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id6a814895a35b1589b781a91744ef872b42aaa69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11783
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The code to handle the lingering qpair when deleting it was really
complicated.
The RDMA transport can connect or disconnect qpair asynchronously.
Then we can include the code to handle the lingering qpair into the
code to disconnect qpair now.
If the disconnected qpair is still busy, defer completion of the
disconnection until qpair becomes idle.
If poll group is not used, we can complete disconnection immediately
because cq is already destroyed.
The related data and unit test cases are not necessary anymore.
So delete them in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic8f81143fcad0714ac9b7db862313aa8094eeefb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Include delayed disconnect/connect retries with finite times into
the state machine of asynchronous qpair connnection.
We do not need to call back to the common transport layer but
we need to do the following, clear rqpair->cq before starting disconnection
if qpair uses poll group, and clear qpair->transport_failure_reason after
disconnected.
Additionally locate the new state STALE_CONN before INITIALIZING
because cq is not ready to use for admin qpair when the state is
STALE_CONN.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ibc779a2b772be9506ffd8226d5f64d6d12102ff2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11690
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
TCP transport already does it but was not documented clearly.
RDMA and PCIe transports follow it and document it clearly.
Then we can check each qpair's state if
spdk_nvme_poll_group_process_completions() returns -ENXIO before
disconnected_qpair_cb() is called.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I2afe920cfd06c374251fccc1c205948fb498dd33
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11328
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add three states, INITIALIZING, EXITING, and EXITED to the rqpair
state.
Add async parameter to nvme_rdma_ctrlr_create_qpair() and set it
to opts->async_mode for I/O qpair and true for admin qpair.
Replace all nvme_rdma_process_event() calls by
nvme_rdma_process_event_start() calls.
nvme_rdma_ctrlr_connect_qpair() sets rqpair->state to INITIALIZING
when starting to process CM events.
nvme_rdma_ctrlr_connect_qpair_poll() calls
nvme_rdma_process_event_poll() with ctrlr->ctrlr_lock if qpair is
not admin qpair.
nvme_rdma_ctrlr_disconnect_qpair() returns if qpair->async is true
or qpair->poll_group is not NULL before polling CM events, or polls
CM events until completion otherwise. Add comments to clarify why
we do like this.
nvme_rdma_poll_group_process_completions() does not process submission
for any qpair which is still connecting.
Change-Id: Ie04c3408785124f2919eaaba7b2bd68f8da452c9
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11442
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was added in patch 07526d85, back in March 2018.
This was before DPDK supported dynamic hugepage allocations.
Presumably this flag was added to reduce the amount of
memory lost due to mempool buffers that would otherwise
span an IOVA boundary (mostly typical with IOMMU off and
we are relying on physical addresses).
Removing it simplifies any code in SPDK that uses
mempool buffers for DMA operations, since it doesn't have
to worry about splitting buffers that span an IOVA
boundary - DPDK has already done it for us.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f6c1407fad02acae7e07c9dd00cb0449bd3554
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12277
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Both blk_request_finish() and invalid_blk_request()
acomplished the same thing, with variation on handled
statuses and debug logs.
Consolidating those two into single function will help
later on when replacing completion of request processing
to single callback.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iae7b93db01bfd98819b2bb8fad9e11afcdb3a459
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12196
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds vhost_blk_[get/put]_io_channel() to be used
by virtio_blk transports.
Functions related to vhost_user sessions were modified to
use it.
dummy_io_channel reference is managed at the vhost_blk
layer and as such continues to use the spdk_[get/put]_io_channel()
APIs. The description is updated to reflect its not specific to
vhost_user transport.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6644198da83bfa0210c167e203d3875e96f1e7ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11101
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The vhost_user_config_json() will be replaced with callback
to virtio_blk transport.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ea0ea38f505f0d354cd34ee5ab9cd3a858bd82e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9538
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_vhost_dev structure should only contain generic fields
that are to be used by either vhost, vhost_blk or vhost_scsi
layer.
The vhost_user backend can hold its properties in
spdk_vhost_user_dev, which is maintained within rte_vhost.
Both structures contain references back to each other.
The reference in spdk_vhost_dev is a void pointer to
allow future transports to keep the reference
to their own structures.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I68640c524426d885c20242146365ba242fa9df8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11813
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In a similar manner for what we do for other per IO data-structures of cmds,
cpls and bufs, use the conventional huge-pages based spdk allocation scheme
for RDMA requests and receives.
Change-Id: I4c2e86e928106e78c053f24915e2a9ce1a200c78
Signed-off-by: Or Gerlitz <ogerlitz@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To maximize cache locality, use lifo and not fifo when managing objects
which are used per IO such as the RDMA receive elements queue.
Change-Id: Id8917558acc1bec29943fcbae6afe6b072bde6ac
Reported-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Or Gerlitz <ogerlitz@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12272
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Due to the same reason as transport_ack_timeout for
RDMA transport, TCP transport also needs ack timeout.
This timeout in msec will make TCP socket to wait for
ack util closes connection.
Signed-off-by: zhangduan <zhangd28@chinatelecom.cn>
Change-Id: I81c0089ac0d4afe4afdd2f2c7e5bff1790f59199
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12214
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In support of upcoming patches and to greatly simplify things,
the capabilites enum which held bit positions for each opcode
has been removed. Only the opcodes enum remains and thus only
opcodes are used throughout. For the capabiltiies bitmap a helper
function is added to convert from opcode to bit position. Right
now it is used in the IO path but in upcoming patches that goes away
and the conversion is only done at init time.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic4ad15b9f24ad3675a7bba4831f4e81de9b7bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11949
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_for_each_bdev() can be applied simply to rpc_bdev_get_bdevs()
because the callback function rpc_dump_bdev_info() is synchronous.
spdk_for_each_bdev() cannot be applied simply to rpc_bdev_get_iostat().
The factored-out callback function _bdev_get_device_stat() is
asynchronous. Add desc pointer to struct spdk_bdev_io_stat and open
before and close after executing spdk_bdev_get_device_stat().
Replace spdk_bdev_get_by_name() by spdk_bdev_open_ext() when a bdev name
is specified.
spdk_bdev_register() checks if the name of each bdev is set and each bdev
is opened while collecting its stats now. Hence it is not possible that
spdk_bdev_get_name() returns NULL. Simplify rpc_bdev_get_iostat_cb()
based on this fact.
Furthermore, we want to fail the RPC for all failures. The callback
function to spdk_bdev_get_device_stat() is executed after stack
unwinding if successful. Defer starting RPC response until it is ensured
that all spdk_bdev_get_device_stat() calls will succeed or there is no bdev.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7b036d6d707c49d19c8922a159b12b5b5ce7ca41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12089
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
OpenSSL 3.0 deprecated the MD5_xxx APIs, so switch
the md5 code in the iscsi library to use the EVP
APIs recommended by OpenSSL instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic5e3cd6e30ebc8b027f0715434cc3be045f1b770
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12240
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Some SeaBIOS versions are not aligning virtio_blk_outhdr
on 8-byte boundary, causing ubsan failures. To be safe,
let's just make sure on our end that we only access a
properly aligned structure by copying this small (16-byte)
data structure to a local structure variable.
Fixes issue #2452.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iacad72c3a1759fb8dc5ba411272a34d93ef2a6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12238
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Only FDs are used for passing them to another process,
we can unlink them after creation.
Here we only unlink the files created in vfio-user,
and there is still one file created via libvfio-user,
it will be fixed via
https://github.com/nutanix/libvfio-user/issues/660.
Partly fix issue #2449.
Change-Id: Ie27640e0cb85f44596e9d0ad5a2b67adf0419f5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can use lib/vfio-user API to setup BAR0 doorbells,
existing implementation is redundant.
Change-Id: Ib880d167c84c6b8482bf1a35559a34c939f6a02d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12211
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The config_bus_number is an offset within the config space reserved for
the devices behind the VMD, while bus_number refers to the actual bus
number assigned by VMD that depend on the VMCAP and VMCONFIG registers.
So, to access the mapped config space we have to use config_bus_number.
We didn't do that when resetting root ports', which could lead to
segfaults if these values were different, as we'd access unmapped
memory.
Fixes#2451
Change-Id: I4e7bbb81400462284014565099bec98f6171c8c9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12208
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously spdk_vhost_dev_backend held callbacks
for vhost_blk and vhost_scsi functionality, along
with ones that are called by the vhost_user backend.
This patch separates out those callbacks into two
structures:
- spdk_vhost_dev_backend - to be implemented by vhost_blk
and vhost_scsi
- spdk_vhost_user_dev_backend - is only implemented by
vhost_user backend, callbacks for session managment
specific to that transport
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348090df5dddeb2b1945b082b85aec53d03c781b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously g_packed_ring_recovery was set globally.
Setting that during controller creation, would affect
all previously created controllers.
This is now set on per-controller basis and only
enabled if packed ring feature is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idcc7231471446c805154648ab835a6af78f6543c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12040
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate parsing generic rpc vhost params form device specific,
this solution allow to create various device which share
common parameters.
Change-Id: I50b1a89a8260fb1394880a750591e95539995288
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
None of the current DEBUGLOGs are in any kind of
performance critical code path. Making them INFOLOG
means that we can enable them even in release builds
to get additional information if needed.
(Note: planning to do this with other libraries and
modules as well.)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61765fab843a06c36ac1979151589e8f57fea76e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12209
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
No functional change; this just makes the poll code a little easier to
read.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6d1dcd940ed5b461856b535b1bf01c4efa8612a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
