For CREATE IO SQ command, we will defer to post completion
until the SQ was connected, we may call post_completion()
in different threads, so here we will send a message
to CQ thread when necessary.
Change-Id: I87a0f8982811c76ce8eb49db6a136f4cbe6e0a93
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11078
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK RDMA target reports msdbd=16, these addtitional
SGL descriptors are located in capsule. The user can
set ICD size lower than required for msdbd=16. This
patch verifies that ICD can hold all additional SGLs.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I875d40e14e6506c39169d084e56df7ca5d761209
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
We will assign each SQ with different poll group in round
robin way by default, this may cause race condition to
post completions to one CQ in different threads, so here
we will assign the SQs which share one CQ into same poll
group.
Also enable multiple cores NVMe compliance tests so that
to cover shared IO CQ case.
Change-Id: I9d7cc78aaedceed23986d9f89ed945e0eb337e09
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11115
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we mixed SQ/CQ definition together, one queue pair
data structure may contain CQ,SQ or both CQ and SQ separately,
while here, we split the queue pair definition into SQ and CQ
respectively as code cleanup.
The NVMf library uses queue pair concept, but for vfio-user
case, each SQ created by VM is mapped to NVMf queue pair, so
we also change `connected_qps` to `connected_sqs` to reflect
the fact.
No actual code logic change in this commit.
Change-Id: I293ccbfbf054fe864d348fc56793dd1ccd366f6d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11036
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libvfio-user will call quiesce callback when there are
memory region add/remove and device state change requests
from client, and in the quiesce callback, we will pause
the subsystem so that it's safe to do everything after
it, then after quiesce callback, we will resume the
subsystem. The quiesce callback is also used in
live migration, each device state change will quiesce
the device first.
Change-Id: I3a6a0320ad76c6b2d1d65c754b9f79cce5c9c683
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will use the controller state to implement the coming
device quiesce feature, it's safe to do anyting when
a subsystem is in PAUSED state.
Change-Id: I3b466ed01848e668a1ffcea1d4f1466e971afa23
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10619
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users may remove the listener while VM is connected, the endpoint is
associated with Unix Domain socket file, we should destroy the endpoint,
however, the controller maybe still active for now, because nvmf
library will help us to disconnect all queue pairs in asynchronous
way. Here we use the same way as the NVMf library to destroy the
controller when there is no connected queue pairs.
Fix#2246.
Change-Id: I0775d5294269d848d859968edafc8eaa1d89a32c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10379
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The controller may be freed eailer than endpoint, so we still
need to unregister the memory region from SPDK. The case
can happen when removing the listener while VM is connected.
Change-Id: I95d49cefdbff3e0bdea316fac824ef8b218fcd2c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
We should hold the transport lock to iterate endpoints.
Fix issue #2313.
Change-Id: I8e0539a51e843a3299908d9da7749fe9becb5e7e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11037
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
We met an issue that client got a NVMe completion with old SC
bit, so we add a memory barrier here to ensure the NVMe completion
is fully populated.
Fix issue #2323.
Change-Id: I7887d789a0acd3634a10aa7dc8de81a153137ae7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is an error case that the block device didn't complete
outstanding IOs during the controller reset or shutdown, so
the NVMf library will wait until all the IOs returned from
the backend, however, so here we added a timeout timer, when
the time expired, we will try to reset the block device which
hold the outstanding IOs.
Fix#2194.
Change-Id: I8d0746335e1f20a09e6a9ea87730551808a898d1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
For the purpose to support shared IO CQ feature, we will construct
the queue pair data structure at the beginning, and setup SQ/CQ
separately in CREATE IO SQ/CQ routine.
Previously we will disconnect queue pair when got a DELETE IO CQ
command, now we disconnect queue pair when got a DELETE IO SQ command,
and in the disconnect completion callback, we will release the IO SQ
resources, there is a case that the VM will just RESET/SHUTDOWN
controller when IO queue pairs are connected, for this case, we
will also try to release CQ resources in the disconnect completion
callback.
`free_qp` function now is only called when destroying a controller.
Change-Id: I45ec679ddb63bdf1feeba5dc2bd39cae3ba4aa89
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we only use round robin way to assign queue
pair to each poll group.
Change-Id: I8efaf3ef25402102dd1eaa7f7aa8bd8bbe071c25
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11114
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Acceptor poller is registered using rate value
from transport opts structure, but this structure is
initialized on generic transport layer when create()
function completes, so at this time acceptor poll rate
is 0.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I2138825f3ff9dd3cc0ccaa65e8d5c23aab338ad4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Set the SQ/CQ size to 0 so that we will not try to remmap
the ADMIN queue pair in the memory region callback before
the ADMIN queue pair was enabled.
Change-Id: I739a2ec3abcb54b17f31f2bc120312cd02ffeef1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10531
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When deleting a CQ, we will use its reference count to check
how many SQs associate with it.
Change-Id: Ic82e50de0fa92d2f03119ac2cc90ef86a0ea375e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10530
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to support shared IO CQ case, and we will
create/delete SQ/CQ separately, so define the queue state as the
first step.
Change-Id: Ie7b5807dc4aa5a2c117e15f61f3a9baa60135653
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10529
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add dtrace probes aroung qpair/controller/subsystem management
to help with debugging issue #2055.
Change-Id: I0b981bffadee3fe4172ad6916c059bf357959dde
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10237
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It makes it easier to read the logs, as the state values are printed as
integers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I70a9e8860401c18e9305a5fc5771df0bc564d337
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for using zero-copy operations to execute IO
requests in the TCP transport. Of course, they're only used if the
underlying bdev supports them. Additionally, only requests with no
in-capsule-data can be executed using this mechanism.
Added several new states to accommodate for the difference in a way
zero-copy is handled. Also, these flows very depending on the type of a
request (read or write). It stems from zero-copy semantics: to perform
a write we need to wait for zcopy_end completion, while for reads
zcopy_end can only be submitted once we send all of the requested data
to the host.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie02b494c24bc1acc98557cb4b02e867abf9064e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10796
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Zero-copy requests are kept on the outstanding queue for the whole
duration of the request - from the initial zcopy_start submission to the
completion of zcopy_end. This means, that there's a period in which a
request doesn't wait for a completion from the bdev layer, but is still
on the oustanding queue (after zcopy_start callback, before zcopy_end
submit). If a qpair gets disconnected while a request is in this state,
we need to manually force its completion, as otherwise it might hang
indefinitely (e.g. waiting for host data).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I53731b8e363b725efa564ca3c7d89b46f5fb2a24
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10793
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The zero-copy requests can also be queued when a subsystem is paused, so
we need to properly resume and submit them by using zcopy_start.
Since only requests that haven't received the zero-copy buffer (i.e.
before zcopy_start was called) can be queued, we don't need to bother
with checking zcopy_phase.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie629688f6961eb2ae05741df496720b91be4d80d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10792
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It ensures that we decrement io_outstanding counter for requests for
which zcopy_start failed. Also, removed a note stating that such
requests are reverted to regular IO path, as this is not the case.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8eaee88abfd94b73614b367fef9bb938c9962617
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10791
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since spdk_bdev_zcopy_end() cannot really fail (it only fails if we pass
a bad bdev_io), we can simplify the nvmf zcopy_end functions by making
them void and always expect asynchronous completion.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6e88ac28aba13acadea88489ac0dd20d1f52f999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10790
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since this path now supports sending zero-copy, use it for zcopy_start.
Additionally, it makes it possible make zcopy_start void, as it reports all errors
asynchronously via request_complete(), and remove some of the duplicated
error checks.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I41f43ce1651432d9a7d74e3680d4a3f780128a1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a request gets resubmitted and is completed immediately (i.e. the
processing function returns SPDK_NVMF_REQUEST_EXEC_STATUS_COMPLETE), the
upper layer needs to be notified via spdk_nvmf_request_complete().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I236d6e68d1d7d83afdaa30d8bb07e2b133f43155
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Additionally, the NVMe completion status is now updated and the IOs are
queued if the bdev layer doesn't have enough IO descriptors. It makes
the zcopy operations behave similarly to the other IO operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I455ae781e32aa6e60d144d2c91f109bd8be46664
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It makes their names consistent with the bdev API.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I314051f0980b46959d6560aa25885f13b4c28f2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The zcopy_start requests are now executed through
nvmf_ctrlr_process_io_cmd. It makes the zero-copy share checks with the
regular IO path.
Note, that zcopy_end doesn't utilize this path and is directly submitted
to the bdev layer, as it doesn't need to perform these checks (they were
already verified in the accompanying zcopy_start).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic9ffecb15e7c351a9d60e731cc711d6500b845db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10785
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow the zero-copy requests to share more code with the
regular IO path.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idb57447694903a56d984f95aa2f1a3bddc3e4e82
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10784
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will make it possible to submit zero-copy requests through
spdk_nvmf_request_exec().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibc14fe77cd477b11ed55d1350a7486caaad81add
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10783
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The code should never reach these functions for requests using
zero-copy.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If9f30e05a43b340a982604d5b985242d63ce252b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's more descriptive that way, as it's clear the function works on a
single request. Also, passing a request instead of zcopy_phase makes it
more convient to use.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If4d7b087511e128f3590ac7b3b5adcb8ace12003
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10781
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It makes it possible for the user to specify whether a transport should
try to use zero-copy to execute requests when possible.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I40a92b0d7a6707f4c9292795f380846acb227200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
we don't remove the socket fd from socket group when
nvmf_tcp_poll_group_add() return error, and when
closing the socket there is an assertion.
This was found via llvm_nvme_fuzz via TCP transport.
Change-Id: Ib4ab6fc3fc5e2bc6a9545f6ce854bae8f1157fd5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10849
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have very frequent failures when we run test/nvmf/host/multipath.sh
in the test pool.
Call stack showed nvmf_stop_listen_disconnect_qpairs() accessed
qpair->ctrlr even if qpair->ctrlr was NULL.
nvmf_stop_listen_disconnect_qpairs() did not check if qpair->ctrlr is
not NULL before accessing qpair->ctrlr->subsys.
When a qpair is added to a poll group, qpair->ctrlr is cleared to NULL.
The test code test/nvmf/host/multipath.sh executes multiple
reconnects for path error.
So a conflict might occur between adding a qpair to a poll group and
disconnecting a qpair in a poll group.
In this case, it may be acceptable even if we disconnect a qpair whose
qpair->ctrlr is NULL. It will be better than SIGSEGV.
Fixes one of the issues in #2300
Signed-off-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Change-Id: I308fcb886dd410d01e3361c1850dec9a8eacbccf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10860
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These definitions will be used in the next patch to check if
device is rxe
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Icc073344103991ff24fc3bb88a1ceb9867de6f6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10727
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some devices may support SRQ depth lower than defaulut
value 4096
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I58da0ac268a6d4c4a7e3b500ae37b8fad4810e17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10654
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Otherwise, this field is left unassigned and the host receives some
garbage cid.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If1e1fe8c7543bcedfbb897200696e05b71c57e0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10770
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When aborting a request in a NEED_BUFFER state, we set it's completion
status and remove it from the pending_buf_queue. Since it's no longer
on that queue and there's no completion it's waiting for, we need to
manually kick.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1272d441aec3b3090cd8c143a2112a8a6866fcf0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10769
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The tracepoint passes qpair pointer as an argument, while not specifying
it in its definitions, which makes the following assertion to fail:
trace.c:83: _spdk_trace_record: Assertion `0 && "Unexpected number of tracepoint arguments"' failed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I315e9bf0465db7033ac0f1169536c459ac4e9250
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10761
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently if we remove a listener from a subsystem, we
disconnect *all* qpairs that have the same transport ID
as the listener being removed.
Fix that, since we should only disconnect qpairs from
controllers associated with the subsystem that had the
listener removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6cf7422d14f23bf02ba6c4b034b172870694b3e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10690
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This id can be used as the 'portid' for discovery
log entries. Previously we were putting the entry
index in the portid field which was incorrect.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f373585fe671ba7e69eb8e07f603f8e8ac1e270
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10589
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In NVMF Revision spec 1.1a, discovery log should be updated
when removing hostnqn of subsystem.
Update unit test to check the discovery log when removing
hostnqn and destroying subsystem.
Signed-off-by: Peng Lian <peng.lian@smartx.com>
Change-Id: I51c597a2493295a677a7aa68e4f13a887f7e1140
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10668
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Macro PCI_CFG_SPACE_EXP_SIZE isn't defined in kernel 4.9.x, so
we use a fixed value here instead.
Fix issue #2282.
Change-Id: Ife1444e919e4c1dc9328437002c15befe2f393e7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10691
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
it is possible that some specific transport doesn't support
NVMF_MAX_ASYNC_EVENTS (although it is a recommended value by spec)
with that change it is possible to reduce aerl on transport specific
layer so it can be advertised correctly during identify controller
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ife6465b5324fb39f9b343c6f42b860e9dd1164b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Not every transport requires accept poller - transport specific
layer can have its own policy and way of handling new connection.
APIs to notify generic layer are already in place
- spdk_nvmf_poll_group_add
- spdk_nvmf_tgt_new_qpair
Having accept poller removed should simplify interrupt mode impl
in transport specific layer.
Fixes issue #1876
Change-Id: Ia6cac0c2da67a298e88956734c50fb6e6b7521f1
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7268
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On aarch64 platforms, doorbells update from guest VM may not be seen
on SPDK target side. This is because there is memory type mismatch
situation here. That is on guest VM side, the doorbells are treated as
device memory while on SPDK target side, it is treated as normal
memory. And this situation cause problem on ARM platform.
Refer to "https://developer.arm.com/documentation/102376/0100/
Memory-aliasing-and-mismatched-memory-types". Only using spdk_mb()
cannot fix this. Use "dc civac" to invalidate cache may solve this.
Profiling data did not show big performance degradataion.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I9a18718f8c4307b3007b18c32ab02e6796548958
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If a subsystem has no listeners, then there is no need
to update the discovery log when adding a host, or setting
a subsystem to allow all hosts.
This eliminates some unnecessary discovery log update
notifications, especially when setting 'allow any hosts'
on a subsystem immediately after it is created (and before
it has any listeners).
Update unit test to check the adding a host to a
subsystem without listeners does not rev the genctr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63dab5df564269e574bb925890088f52063aa378
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The discovery log isn't updated when a subsystem is created
or deleted, it's only updated when a listener for a
subsystem is added or removed.
So remove the nvmf_update_discovery_log() in the subsystem
create and delete paths. They just generate extra AER
completions that potentially cause the host to do unneeded
work.
Note that if a subsystem is deleted with active listeners,
the subsystem delete path will remove each of the listeners
before deleting the subsystem itself. So the discovery log
will still get updated when those listeners are removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id01bbfa3b24d3e1279a614a2fd60be41387a03b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The nvmf library will use INTEL VID/SSVID/IEEE values by default,
each transport can overwrite them if needed.
Change-Id: I9dad521c4d080b6f0cc1aaeb4b5d5f6863c6846d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When NVMe passthru command (IO or admin) fails on submission (e.g. it
is not supported), set DNR bit in completion status field. There is no
sense in retrying the command in this case.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I55960c128bd9fc31f6defef0b9832259a71684b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8578
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If NVMe admin passthru command is not supported by underlying bdev,
set status code in NVMe completion to INVALID_OPCODE.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I29c4e1f8263b76b27c199cfd2d9b2474432ec70b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10517
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
in case of failure groups shall be destroyed
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I8933f4128a7a3361bbb55d6a9c08a540521e5bda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10435
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Doorbell offset starts from 0x1000 is defined by the NVMe
specification, so rename it to remove `VFIO_USER` prefix.
Change-Id: Ie34b12b3d2618f9b0ad0cf7ccbb103ad2c900f47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10364
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculate supported maximum number of queue pairs based on
BAR0 size, this value isn't allowed to change at runtime, also
define BAR4/5 based on number of MSIX vectors.
Since the maximum number of queues is a large value(512), so we
still define a default value when starting, users still can
overwrite this value with a number no greater than 512.
Change-Id: I1b4b6bdf2ff9d129c8bdd493ffdf0a51f8772d51
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10334
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libvfio-user will save a copy inside the library.
Change-Id: If7bb052b03fb92e46abe50fa945b812d149ef01d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10363
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
adding transport to tgt should be the last step
also there is an issue before change i.e. if calloc failed then
transport remains on the list
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iaf29cfc7b0f535d40160c6fdf9ef6a7e6bfb127c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10429
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When no optimal poll group exists for a qpair,
assignment for round robin happens in spdk_nvmf_tgt_new_qpair().
RDMA transport implments the logic for this assignment in
nvmf_rdma_get_optimal_poll_group().
TCP relied on the spdk_nvmf_tgt_new_qpair() instead.
This resulted in race condition when looking up and assigning
optimal poll groups - see #2113.
To remedy that, TCP now follows the same pattern as RDMA.
Next patch will improve the sock map lookup to fix the #2113.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I672d22ac15d06309edf87ece5d30f8e8d1095fbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10270
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58794b7b946eeb8ff82512905af0a296e3b534aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9817
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a parameter which determines the owner of the
map - target or initiator. It allows to set different
access flags when creating Memory Regions
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0016847fe116e193d0954db1c8e65066b4ff82bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10283
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The pointer to struct spdk_nvmf_ctrlr is used to save mandatory
controller registers to the migration region.
Also rename some ctrlr/qpiar to vu_ctrlr/vu_qpiar.
Change-Id: Ifcb862bf4543a9df3c62d3b0a57b7f93228ccaba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
1. use the transport lock to protect transport endpoints list.
2. don't use mixed errno and -1 as the return value, use -1 for all error cases.
Change-Id: I657fa06a6d82ee8dbeefaa3397df2285ba574b80
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9579
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When destroying controller, we will disconnect each connected qpair,
and in the spdk_nvmf_qpair_disconnect() call, qpair_fini() will also
try to hold the same lock, so existing vfio-user implementation assume
that qpair_fini() will not be called in the same context. Patch
https://review.spdk.io/gerrit/c/spdk/spdk/+/8963 remind me that
vfio-user has this issue. While here, we add one more thread poll
to avoid such issue.
Change-Id: I83b82ddcce3eb54c724291223e794dcb53a08059
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9998
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For live migration support in vfio-user transport, we need to pause
the subsystem when starting migration in source VM, then after
migration, the subsystem is in paused state, when exiting the
application, we will call spdk_nvmf_subsystem_stop() at last,
and existing code will assert this case.
Change-Id: If5214c45973b27f6092c4a6d71ede336e54d89e8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9407
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
There is no need to sum SPDK_CEIL_DIV(length, io_unit_size) and
req->iovcnt as the later is always zero (assignment in spdk_nvmf_request_get_buffers).
Checking SPDK_CEIL_DIV(length, io_unit_size) is enough.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I0fea1d86706d83e4dd9083e6f0ce09e4e4b033a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10089
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The specification says "host specifies an offset (i.e., LPOL and LPOU)
that is greater than the size of the log page requested, then the
controller shall abort the command with a status of Invalid Field
in Command."
Offset is used (if needed) to retrieve specific records of
Discovery Log Page, so we don't check it for Discovery Log Page.
Change-Id: I76ce929600b9f2ca9b69397d25f339d55729e6d3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10093
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can be used for multipath validation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba62c5e90b22a9a85078fbc783d3a7273c029cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10137
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
CAP.CQR (Contiguous Queues Required) is always 1, so we should
return invalid field when PC bit is 1 and return Invalid Interrupt
Vector if Interrupt Vector is too big.
Also fix the issue that just creat/delete a CQ.
Change-Id: I7cc64a5946a1ed3161448fca8b433d08e5fee715
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10080
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
As per the nvme specs,
If OPTPERF is set to ‘1’ indicates that the fields
NPWG, NPWA, NPDG, NPDA, and NOWS are defined for this namespace and
should be used by the host for I/O optimization
Setting NPWA, NPDG, NPDA same as NPWG and NOWS same as MDTS
Fixes#2197
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: Ic769a21b6821fa731eeae83e7d30c380e8092e37
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10007
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
User may configure opts.max_qpairs_per_ctrlr, so use
opts.max_qpairs_per_ctrlr instead of using fixed default
NVMF_VFIO_USER_DEFAULT_MAX_QPAIRS_PER_CTRLR.
Also do not allow users to configure max_qpairs_per_ctrl >
NVMF_VFIO_USER_DEFAULT_MAX_QPAIRS_PER_CTRLR.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: Id9f1f796559f3bb8b2d3f5031606050470681b99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9994
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We generally shouldn't do ERRLOGs based on bad
inputs from the host, so change some of these to
DEBUGLOGs instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id42a8e51964e0238cd2841be8ac1d4ccaa1d150d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10037
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When doing controller reset and shutdown, we may change the
CSTS.RDY and CSTS.SHN even there are pending IOs in the IO
queues, so here we add a timer in the reset and shutdown
callback, it will change the status when there are no
connected IO queues.
Fix#2199.
Change-Id: I3a54d30b257973661b269ad5e37637490f9390f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9908
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK nvmf target reports all listeners on all subsystems
in discovery pages, kernel target reports only subsystems
listening on a port where discovery command is received.
NVMEoF specification allows to specify any addresses/
transport types. Ch 5: The set of Discovery Log entries should
include all applicable addresses on the same fabric as the
Discovery Service and may include addresses on other fabrics.
To align SPDK and kernel targets behaviour, add filtering
rules to allow flexible configuration of what should be
listed in discovery log page entries.
Fixes#2082
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie981edebb29206793d3310940034dcbb22c52441
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This reverts commit 3b1f13ef29.
It seems like this particular commit is causing failures on the
CI side related to the following issue:
https://github.com/spdk/spdk/issues/2214
Reverting for now to make the CI stable.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7f32c612b8549477de0b9079d114cec4ec9bda59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9986
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a race condition between controller destruction and
subsystem state change, e.g. admin qpair may already be freed
when a namespace is added or removed. As result in function
poll_group_update_subsystem we may get heap-use-after-free error
Another problem is that some qpair's live time may exceed controller's
life time. To avoid it, start controller destruction process when the last
qpair finished the disconnect process (previously controller started
the descruction process before the last qpair starts to disconnect
and it could lead to raise conditions)
Fixes#2055
Change-Id: I11612979eb914a5fdcc7b9e3c812bf1e450b6120
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8963
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of our tpoints have a name exceeding 24 characters.
Althought this is not problem for SPDK, it might cause
confusion, because error messages are printed.
Tpoints regstered inside fc.c had their _REQ_ part removed,
since it was used in all of them.
Fixes#2208
Change-Id: I598eb9c1d252d8ca6c83f82e564a6b53037936f4
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9963
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch makes use of the changes from previous patch and to
show connections between bdev events and tcp events.
Change-Id: If28c256d74a9a5d581ee4d8292a08fc061fee968
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9622
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvmf_ctrlr_cc_shn_done() and nvmf_ctrlr_cc_reset_done() are
almost same, so consolidate them together by adding a flag.
Change-Id: Ib7714d31a40f9d8d344ec2630c083c5d76dac8a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9907
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's too strict to fail the controller when there are no free requests.
Change-Id: I0a66ff2d294a2fd9326506ea50af4213aaaf8e92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
We already support Set Features with Host Behavior, so here also
add the support in Get Features.
Change-Id: I27d973e81fd6be89cc67ad559439334fc1087c9e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
nvmf_subsystem_get_qpairs RPC handler may cause the program
could not exit normally (e.g. ctrl c). Reason is that,
spdk_get_io_channel() will be called during the getting
qpairs stream, which will add refcount value for each
existing channel. When end target, channel cannot be
destroyed since refcount be added additionally and
its value could not be subtracted to 0. As a result,
the program will hang in the process of exiting.
So here we don't need to allocate a new channel, just use
the exist one.
Signed-off-by: zhaoshushu.zss <zhaoshushu.zss@alibaba-inc.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I08b4678edaa9404b8e8af125ebae572b31edf77e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9881
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
