We changed read I/O submission to stop splitting when detecting LUN
hotplug very recently. We can do the same refinement for read I/O
abortion.
In _iscsi_conn_abort_queued_datain_task(), set all remaining length
to the new task and complete it immediately. We keep the code to
process the case that queued_datain_task completed but is still in
queue, but we can change its if condition to assert.
Simplify the corresponding unit tests accordingly, and set
task->scsi.transfer_len in abort_queued_datain_tasks_test() to
exercise the changed paths.
In iscsi_pdu_payload_po_scsi_read(), if task->scsi.transfer_len is not
larger than SPDK_BDEV_LARGE_BUF_MAX_SIZE, no minimum calculation is
necessary and we can substitute task->scsi.transfer_len to
task->scsi.length simply. This change is too small to be an independent
patch and is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea93e51b103eae141a007a0abdaf13cbe6d5287f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The hardware sgl format can describe large contiguous
buffers using just a single element, so it's more
efficient that a prp list even for a single memory
segment. Always use the sgl format.
Change-Id: I9c62582829f0d64dcd1babdbc48930ddb4d9e626
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
opts->env_context could have more options specified
than just --legacy-mem. So strcmp() is not a valid
comparison operator - we need to use strstr instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4c8cbcbe7c141693a07a11648d6673ec8c012e5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For TCMalloc regions which we register with spdk at runtime in the MMapHook, we
need to ensure that SPDK doesn't do any allocations in that path otherwise we
will hit a livelock situation. MmapHook is invoked when TCMalloc is out of free
memory and needs to get more memory from the system, for the hugepage case it
gets via mmap.
In the current code, we could end up calling malloc in the spdk_mem_register
call via the following call path.
spdk_mem_register -> spdk_mem_map_set_translation -> spdk_mem_map_get_map_1gb
To avoid this livelock situation we call rte_malloc instead which shouldn't
invoke the system allocator. Note that in try_expand_heap_primary() which is
invoked in the rte_malloc code path, we can still call malloc, so we need to
only use this when dynamic memory allocation is disabled via --legacy-mem.
It is possible in the future we could work around even this limitation,
but for now this implementation will be much simpler.
Have verified this change fixes the livelock condition which I was hitting in
my setup without this fix.
Change-Id: I69d0813a70da1f26f8c4d9d8895e406c026be18b
Signed-off-by: Alok N Kataria <alok.kataria@nutanix.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
We will use this in a future patch to determine whether it's safe
to use DPDK allocated memory when allocating new 1gb page entries.
We could use it in this patch to decide whether or not to register
the memory hotplug handler, but there's really no harm registering
it even when it's not needed.
Ideally DPDK would provide some kind of API to query how DPDK was
configured. In the normal case we know whether legacy-mem was
specified, but if users initialize DPDK themselves and then call
spdk_env_dpdk_post_init(), we won't know if legacy-mem was specified.
So in that case, we will just assume that it wasn't specified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ied0e5ff777c8ee651043f46a37ce62e44bfcc5fe
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch attempts to solve naming conflict between
CUSE devices created by different SPDK instances.
Each NVMe device is enumerated by SPDK process from 0
up to 127. When process attempts to start cuse device
tries to set exclusive lock on temporary file
"/tmp/spdk_nvme_cuse_lock_<index>" and keep it until
device will be stopped.
If setting lock fails, index is incremented.
It prevents to use the same controller index from
few SPDK instances.
Change-Id: If744ac23f813bd992efb80ae2b61a1acefb5054c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch removes posibility to set cuse device path. Instead
"/dev/spdk/nvme*" path is used.
Change-Id: I7c3087772a3661eebe03fce21356c35cc8204b49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474598
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To properly return the error case when adding an existing
IP or delete a not existed IP. Proper test case is also
updated.
This is also to fix below issue:
https://github.com/spdk/spdk/issues/992
Change-Id: Ia4d3af8cc86d9bdb66b18a165510cd08f9bfa555
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476543
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMF_REQ_MAX_BUFFERS is defined in nvmf_internal.h and not used in rdma
source code.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I50f24c8fc4ea773378418f7803361d8592f961ae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
It is valuable to have more detail status instead
SPDK_NVME_SC_INTERNAL_DEVICE_ERROR.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ifd003b490a7ae9af017645c97636ceaf2f93d4b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476634
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The nvme_transport_ctrlr_scan() may return failure while there are
multiple controllers, so the probe context's init_ctrlrs list may
not null for this case, so when free the probe context, let's ensure
there is no controller in the init_ctrlrs list. Also added a UT to
cover this case.
Fix issue #1095.
Change-Id: I4d9a10ad73cf00bbe159edd1f5b919797333feb6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476969
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, when additional resets were submitted while a reset was in
progress, those resets were queued and then executed serially as part of
executing the original reset. Doing multiple resets on a bdev in quick
succession is not useful if the first reset succeeds and is very
unlikely to be useful in the negative case. Instead, we should batch
resets and complete them all at once when the current reset succeeds or
fails.
Change-Id: If10e0f37526860eaeeb41a8803d6298a3eff3212
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
nvme_qpair_get_state fits more closely with the semantics in other
modules.
Change-Id: I6ea8e02abe27253d9b4d779a43ac1963be56356a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
The qpair state transport_qpair_is_failed is actually equivalent to
NVME_QPAIR_IS_CONNECTED in the qpair state machine.
There are a couple of places where we check against
transport_qp_is_failed and then immediately check to see if we are in
the connected state. If we are failed, or we are not in the connected
state we return the same value to the calling function.
Since the checks for transport_qpair_is_failed are not necessary, they
can be removed. As a result, there is no need to keep track of it and it
can be removed from the qpair structure.
Change-Id: I4aef5d20eb267bfd6118e5d1d088df05574d9ffd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The address was padded before the size of requested area was checked,
which for areas bigger than available space resulted in unnecessarily
padding the remaining area.
Change-Id: Ic52a6e30c1cbe2526ac7f3effc20279cd91cadbc
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
CPU mask parameter was deprecated in v19.10.
If we remove the related code from the portal parser, we will be
able to use the parser for the iSCSI initiator to know the target
portal in iSCSI fuzz testing. So let's remove the parser and its
test code here.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72ad4364323abda0f0ed10519b56244cd0c7612e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add the tsc trace for the parent bdev_io.
Change-Id: Idf5c5df3953fa1697c384a4f83b591584dd30a80
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476588
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The reset cmd and parent of splited IO would not go into
the _bdev_io_submit() so they don't record the submitted
time. The timeout IO check needs the submitted time so we
add them in this patch.
Change-Id: Ic7217171ec878d4a6dfa80d6635957ca0186928b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a link to the bdev channel for linking all the bdev
IOs that were submitted to this channel so that we can
monitor each IO's consuming-time.
Change-Id: I1e425b2059f20fd7b158eb3d6b023ce8629e7a30
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are some new features defined in NVMe 1.4 specification also need
the data buffer, but for now we only listed 3 features, we will check
the data length field anyway, so this piece of code can be removed.
Change-Id: I22204cf53077073434bb0ed73693bcf72883f084
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reservation Acquire Action(rqcqa) is used for reservation acquire command, since
we have replaced cdw10 with specific commands fields, so split the two cases to
make the code looks more clear.
Change-Id: Ib2a2458dd0fe8345f1c33341dab1c4fe3b82829f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476838
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In iSCSI library, macro MATCH_DIGEST_WORD() and MAKE_DIGEST_WORD()
have been used instead of match_digest_word() and make_digest_word().
The latter has not been used for a long time. Hence remove them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0fdb5c24a120a08fe06f825ee5e6c24ba64c0edf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This log has been observed often after recent refinements but
this log does not mean any error. So use SPDK_DEBUGLOG instead
of SPDK_ERRLOG here.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3aa39ab3773ae83586c99699fd2473ca02c35eb9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I23ea7101030c6d2d3fbccba878bdf77d89b814cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I39431b213216b1e4e677f80de8c14c40dd7da150
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Other than code movement, fix a typo.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib55fe86295f47c1c86bb99d5e3a6862f508bfcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I82fe06e3488a1c623c5fc875cf797790ee4ea48f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f7dd681ca430c810dac6fcea122f84a142152d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8e123177124b4526e9bbe9001293c6f668b9c3bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
conn->data_out_cnt does not control anything now but adding assert
for conn->data_out_cnt will be helpful at least to ensure that the
current SPDK works correctly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I31ee90769ce0555e64bd41c283e8b437326efebf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
iscsi_conn_free_task() is used only when exiting connection now.
Hence we can remove the parameter lun and simplify the function
and its unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6e7bf09672edca1f70c042ac58f098114d71ec78
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We ensure current pending tasks are aborted and no new task or PDU
is pending after LUN is unplugged now. Then we have to ensure all
task completions and aborts are sent to initiator.
However, we had removed pending tasks without any notification to
initiator. For this implementation, we are not surprised if initiator
waits for in-flight commands for a long time.
Due to recent refinements of LUN hotplug, we can wait safely that
all existing tasks complete or abort.
In _iscsi_conn_hotremove_lun(), after aborting R2Ts, start a poller
to wait until all PDUs for the LUN are flushed. Then close the LUN.
We can safely free deferred PDUs for the LUN because they are
already flushed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I869b79a7c93d2e8a4a1577cc20d3b466548dfaaa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We want to use poller for LUN hotplug in iSCSI library. According to
the naming used in SCSI library, rename iscsi_conn_remove_lun by
iscsi_conn_hotremove_lun. The next patch will iscsi_conn_remove_lun.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I08bb8c92db23ac3adcde4f39c0e812f3d97430d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we had allocated temporary context, struct
_iscsi_conn_remove_ctx to process LUN hotplug. However, we
had to consider out of memory during connection is active,
and we could not use any poller to process LUN hotplug because
LUN hotplug may conflict with connection exit, and this
possible conflict made us very difficult to use poller for LUN
hotplug. Introducing struct spdk_iscsi_lun will resolve all
these issues.
Allocate struct spdk_iscsi_lun per LUN and store connection,
LUN, and LUN's descriptor into the struct. Then use the struct
for LUN hotplug and free the struct after LUN is closed when
LUN is removed or connection exits.
struct spdk_iscsi_lun is similar with struct spdk_nvmf_ns in
NVMf library.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ice26330f3948070c96d2fb53b94941be3b467079
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476113
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the subsequent patches.
Subsequent patches will introduce struct spdk_iscsi_lun
to refine LUN hotplug process and fix critical issues of it.
This change will make us easy to introduce struct spdk_iscsi_lun.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75db59d88bb09ee2ea94e8c02e0e87003352850c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476112
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
In _iscsi_conn_free_tasks(), we had parsed conn->write_pdu_list
and then parsed conn->queued_datain_tasks. However when we parsed
conn->write_pdu_list, if there was any task in conn->queued_datain_tasks,
some PDUs were inserted conn->write_pdu_list. Hence after parsing
conn->write_pdu_list, new PDUs were in conn->write_pdu_list as orphan.
Then orphaned PDUs were freed later but LUN was already freed and
critical failure occurred.
This patch swaps the order of conn->queued_datain_tasks and
conn->write_pdu_list, and add comment to explain the change.
Additionally, this patch adds unit test which fails if it runs
without this fix.
Fixes issue #1030.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icb0ffbbbac70792a62939dc55a69df05d2ab9128
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a iSCSI write is large and split, if LUN is removed between
creating and submitting the last subtask, spdk_clear_all_transfer_task()
completes the primary task and then process_non_read_task_completion()
tries to complete the primary task.
This is the double free case, and the later have to be skipped.
We add a flag is_r2t_active to struct spdk_iscsi_task and use it to
check the duplication. We may be able to use primary's initiator task tag
(ITT) instead but we can not rely on ITT because it is set by the initiator.
We clear is_r2t_active even when primary is removed from
conn->queued_r2t_tasks but it will be no harm.
Fixes the issue #1064.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6511bd7adaa8fcb9a07bc40d498e8ee0b7a7ccf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In process_non_read_task_completion(), when the current I/O is
not split, we have to call only spdk_iscsi_task_response().
The next patch will fix the github issue by changing the path
executed when the current I/O is split.
Hence to make the fix easier, this patch separates split case and
non-split case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic1603609f760c4bdd41272ba6146e260f668b059
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475043
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The type of pdu deferred to be free only have
two types, R2T or DATA_IN. And the two types of pdus
are all assoicated a task, so updateing both the code and unit test case.
Also for all pdu free, we should use spdk_iscsi_conn_free function since
for normal pdu free, we all use this function.
PS: I also tested the calsoft local, it does not trigger the assert.
Fixes#1074.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0524965baf5349a100210ef717aedaa5f8ff105e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475657
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This revert commit 6e4e85dcef.
Causing intermittent build pool failures. We had different operations
in remove_acked_pdu() and _iscsi_conn_free_tasks(). The patch tried
to unify them but was wrong. The operation in removed_acked_pdu()
was correct. This patch restores it. The next patch will fix the
operation in _iscsi_conn_free_tasks().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia398fd295769b786ba4777cc9f7df6e134f15e48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: Simply the code, doing data_cnt_in every where
will make the code diffcult to maintain. If we put the
management in iscsi task get and free related function, then
the code will be easy to be read and easy to maintain.
Change-Id: Ib9af067326630657877a94afc2eb0db28f5d5fd1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Do not let the primary task do the I/O if it is
splitted into subtasks. This will make the code simplier,
when all the sub I/Os are finished, we can free the
primary task.
Update the corresponding unit test also.
As a result of this change, when read I/O is split into subtasks,
the primary task uses only some of its data. Hence separate
iscsi_pdu_payload_op_scsi_read() into split and non-split
case explicitly.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9bbe4b8dd92a2996f35ad810b33676e34670c77e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473532
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
