Found while debugging issue #2596, unfortunately this
is not the root cause of that issue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I27501e283ce7c9bf7a431e8b48842c83f80792c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14165
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Add indication of support for compare, compare & write and abort
in json bdev info dump.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ifc8dc1a1b180f08fcd9e9d58684eab1fd50356ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14137
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After running into multiple issues with missing packages when building
bpftrace, I went to the bpftrace repo and used the install documentation
to successfully build and install bpftrace. This patch updates the
spdk documentation to point to the documentation in the bpftrace repo.
Change-Id: Iab5ef901d282a26d6a3c4f59cceb46b317ee658a
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The new commits eliminate `1.45%nvmf_tgt[.] vfu_log`
CPU profile when building in release mode.
Change-Id: I6347949a31f61ecfc619435ac3743f8d9dab3603
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's observed that `spdk_mem_register` may take some time
to register VM's memory regions, and QEMU will wait the
socket message within 1 second, so here, we increase the
value to 5 seconds which could cover all test cases in CI.
Fix issue #2392, #2600.
Change-Id: Ia95cc9c94d27076a25dc107cff32fae9a3608b1e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit a119799b ("test/nvme/aer: remove duplicated changed NS list log")
changed the nvme driver to read the CHANGED_NS_LIST log page before
calling the application's AER callback (previously it would read it
after).
Commit b801af090 ("nvme: add disable_read_changed_ns_list_log_page")
added a new ctrlr_opts member to allow the application to tell the
driver to not read this log page, and will read the log page itself
instead to clear the AEN. But we cannot add this option to the 22.01
LTS branch since it breaks the ABI. So adding this API here, which
can then be backported manually to the 22.01 branch for LTS users
that require it.
Restoring the old behavior is not correct for applications that
want to consume the CHANGED_NS_LIST log page contents itself to
know which namespaces have changed. Even if the driver reads the
log page after the application, that read could happen during a
small window between when a namespace change event has occurred and
the AEN has been sent to the host. The only safe way for the
application to consume ChANGED_NS_LIST log page contents itself
is to make sure the driver never issues such a log page request
itself.
Fixes issue #2647.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaeffe23dc7817c0c94441a36ed4d6f64a1f15a4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14134
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The display_thread() function is the only one that needs to use a copy
of thread data, as threads might be moved between the cores during
SPDK application lifetime.
To avoid problems with using freed memory in the copied thread
structures, make sure the data is always present, by allocating a copy
of necessary strings. This will ensure that even after we have already
freed the globals holding data from RPC, the pointers used to display
the names and cpumasks will still have something to point to.
Fixes#2635
Change-Id: If9228ee199a774d208ddd6ff846532be3ef2012d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Source authentication file before calling each
tempest test. This fixes problems with
"Connection refused" caused by openstack.keystone
authentication.
Change-Id: I7d4184ec9d52f23d354103a1f45ecfac71bc9b97
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13553
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes #issue 2636.
The existing allocation method (nvmf_rdma_get_optimal_poll_group())
is traversal and unperceived link disconnection. A more fair method
considering the number of real-time connections to allocate a poll
group is implemented.
Signed-off-by: liuqinfei <18138800392@163.com>
Signed-off-by: luo rixin <luorixin@huawei.com>
Change-Id: Ic1e6283e386dbb0dd6655bedebe26aeedb16c333
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix missing free of buffers used in tests.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I15a4e1edb8046447e6cd96104421f0e623d8ba09
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14139
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Introduce new tests for compare with metadata. Tests
if compare is successful or miscompare for both interleaved
and separated md. We test the normal io path and the
fall-back provided by the bdev layer.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Iaefb6d3201cd9cc800422d494c6ef7494e104afd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14133
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If the bdev does not natively support compare we use
the fall-back which performs a read instead of a compare
operation. We then compare the results of the read with
the buffer provided by the user. In case the bdev has
metadata, there are two options:
1) md is interleaved -> the md will be part of the data
buffer allocated for the read and compared accordingly
2) md is separate -> currently we do not compare
the metadata but just ignore it.
This patch fixes 2) by comparing the md buffer after
the read is done.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I1018b8c02540bffcba69408eb283bdc8f06bb747
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14132
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_io is allocated from a memory pool and is not zeroed on reuse.
So set bdev_io->u.bdev.ext_opts = NULL for io ops where it is not
supported (yet) so we can test against it.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ia579ea6b0787cf62572ea3a6bf2251867602e952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Updated the existing nvme aer test to remove a race condition
where the aer_cb is executed and the g_temperature_done variable
is incremented just before it is reset back to 0, which causes
the test to loop indefinitely. Also changed the reset_ctrlr call
to check for non-zero instead of < 0 to check for failure.
Fixes#2559
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ib0679917684cdbd4c8038279426c6ec368be5f11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This commmit introduces a new bdev type backed up by DAOS DFS.
Design wise this bdev is a file named as the bdev itself in the DAOS POSIX
container that uses daos event queue per io channel.
Having an event queue per io channel is showing the best IO throughput.
The implementation uses the independent pool and container connections per
device's channel for the best IO throughput.
The semantic of usage is the same as any other bdev type.
To build SPDK with daos support, daos-devel package has to be installed.
The current supported DAOS version is v2.X, please see the installatoin and
setup guide here: https://docs.daos.io/v2.0/
$ ./configure --with-daos
To run it, the target machine should have daos_agent up and running, as
well as the pool and POSIX container ready to use, please see the
detailed requirements here: https://docs.daos.io/v2.0/admin/hardware/.
To export bdev over tcp:
$ ./nvmf_tgt &
$ ./scripts/rpc.py nvmf_create_transport -t TCP -u 2097152 -i 2097152
$ ./scripts/rpc.py bdev_daos_create daosdev0 <pool-label> <cont-label>
1048576 4096
$ ./scripts/rpc.py nvmf_create_subsystem nqn.2016-06.io.spdk1:cnode1 -a -s
SPDK00000000000001 -d SPDK_Virtual_Controller_1
$ ./scripts/rpc.py nvmf_subsystem_add_ns nqn.2016-06.io.spdk1:cnode1
daosdev0
$ ./scripts/rpc.py nvmf_subsystem_add_listener nqn.2016-06.io.spdk1:cnode1
-t tcp -a <IP> -s 4420
On the initiator side, make sure that `nvme-tcp` module is loaded then
connect drives, for instance:
$ nvme connect-all -t tcp -a 172.31.91.61 -s 4420
$ nvme list
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I51945465122e0fb96de4326db742169419966806
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds functions for reading end metadata and initializing band reloc state.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I3d12c4a7edd36f0437bf10316114c83efe449f0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While we do not support cmp & write with separate md we
do support it with extended LBA format, i.e. interleaved md.
The check was to permissive and we only need to skip the
test if the md is separate.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I483a33c762a66036bf88e77e7fc88dcb609d391a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14138
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Compaction allows for writing to 100% of the exposed address space
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I0860730299249e4369fac33fdab5fbd7ff91c1da
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After chunk is compacted it can be moved to the free state, able to be used
for new user IO again.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I7f9c341169b171ee246c5aa161d74903b91bdc2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During compaction FTL moves valid user data from the nv cache drive to
the bottom device.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ia200af39cec80014fac3a10f20d2859b10a81088
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add writer - tracks and manages band state transitions and write pointer as IO
is issued to it.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I5f878dc15bc1c1ac84835f75fe440672fad541d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows mapping an nvme_request back to the
nvme_bdev_io.
This requires bumping up the max number of arguments per
tracepoint. 5 was previously chosen as max since it
exactly fit in 64 bytes (1 cacheline) when all
arguments were stored as uint64_t, but now that we
support uint32_t arguments we can afford extra
arguments when some of them are uint32_t. I've
bumped it to 8 so we can avoid having to touch
this value multiple times if we find some cases
where we need 7 or 8 args.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2ef5e59d10549860b47542e68c1c34efa63047f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This will allow us to map spdk_bdev_io events
to nvme_request events coming in a future patch.
Since we pass the nvme_bdev_io to the nvme driver
(not the spdk_bdev_io), we need to add tracepoints
for the nvme_bdev_io so that spdk_trace can
do the spdk_bdev_io->nvme_bdev_io->nvme_request
mapping.
An alternative would have been to pass the spdk_bdev_io
as the cb_arg to the nvme driver, but that change
seemed to invasive, and I think we will find other
uses for the nvme_bdev_io events anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id7519e689b01875093359f41a1ca2af912061a8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is just a simple wrapper for now around the
calls to spdk_bdev_io_complete and its
nvme status variant. Upcoming patch will
add an spdk_trace_record to this function as well.
This avoids having to litter spdk_trace_record calls
in too many places.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id2fb3aeb8b070ad6e09c1dfb9a30a61666a35688
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Calculates general priorities and trigger points for writers
(gc and compaction) dependent on number of free bands. GC will
be started at SPDK_FTL_LIMIT_START level, while at SPDK_FTL_LIMIT_CRIT
compaction needs to be stopped and only GC is allowed to work.
This is done to make sure FTL doesn't run out of free bands and deadlock
itself.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I1aab98503c2e79e97f8e4e9fb1257530fa9770e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We'll likely need this eventually to address silicon version
specific workarounds.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie6957674113cf0c7b7d695b468c694668ebbf2bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13571
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is targeted to fix the following error seen under clang:
ftl_nv_cache.c:54:1: error: unused function 'nvc_data_blocks'
[-Werror,-Wunused-function]
nvc_data_blocks(struct ftl_nv_cache *nv_cache)
^
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I11d52e76df5872819770d9468b6fa4ae54d8927c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14055
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
In multi-process, we need to make sure we don't
complete a register_operation in the wrong process. So
save the pid in the nvme_register_completion structure
when it is inserted into the STAILQ, then only complete
operations where the pid matches.
Fixes issue #2630.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58c995237db486fecdd89d95e9e7a64379d0b0e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13940
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To prevent the processing of outstanding commands from starving the rest of the system
Fixes: #2586
Signed-off-by: Chen, You <you.chen@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I392db2359408cdef32cc1f46b76ecd94f0c3332c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13685
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
