We have no particular requirement to keep both conn->outstanding_r2t_tasks
array and conn->active_r2t_tasks list now.
To improve readability and maintaineability, unify two into the latter,
conn->outstanding_r2t_tasks list. Update unit test accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25cf7cffbe39ac66e102eb3052340de6ef65c8f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3115
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously iscsi_del_transfer_task() dequeued the task only from
the array conn->outstanding_r2t_tasks[].
process_non_read_task_completion() had dequeued the task from
the tailq conn->active_r2t_tasks then.
However abort_transfer_task_in_task_mgmt_resp had not dequeued the
task from the tailq conn->active_r2t_tasks then.
This was an apparent bug, and is fixed here. Update unit tests
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I93f02b2fb670dcee4c32d61c264e3ad5b4f9f43e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3108
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
headers can be installed in different directories but `/usr/include`
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
Change-Id: Ibc4641813f6f1c904560dfe7d05cb9b40109cea7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3134
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The length of a keyed SGL data block is limited by 3 bytes.
Add a check to fail requests which length exceeds 3 bytes.
In other case we can send an incorrectly formed SGL request with
an invalid or zero length.
Fixes issue #1450
Change-Id: I77cdaff5fbf4be5754a3ac6008b8ccd532ac5905
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3056
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As SPC4R31 5.9.3 "Exceptions to SPC-2 RESERVE and RELEASE behavior" says,
add a SPC2 RESERVE/RELEASE test case when PR is present.
Change-Id: Ibd7e703895cb910637677c6cb28b09e014976e9d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2893
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a test case for SPC2 RESERVE/RELEASE from 2 hosts.
Change-Id: I7b2a6352aa8a90a291f495f059de8920d6cbc11b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some OS(Windows and VMWARE esxi) will send SPC2 RESERVE/RELEASE
commands when formatting the filesystems, but in our previous
implementation of reservation feature, we didn't add such support,
in specification SPC3/4, they all include one section "Exceptions to
SPC-2 RESERVE and RELEASE behavior" feature for compatible support of
SCP2 RESERVE/RELEASE, so we add this support now.
Fix issue #1414.
Change-Id: I65d85ffb3b8f824b0ae4e130f53f01d95735d700
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Include completion operation into nvmf_qpair_abort() and rename
it by nvmf_qpair_abort_aer() for clarification. Update unit test
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I763cc7d24b979e27e8775f4e69730466a2351bdf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2712
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Cache size of mempool is not based on SPDK thread but DPDK thread,
i.e. CPU core. So replace spdk_thread_get_count() by
spdk_env_get_core_count() to determine cache size of mempool in
spdk_bdev_initialize().
Besides, allocate and free stub cores at the corresponding unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc4deae84c74820af4de61e991fa3f8683add058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using not FAILED but ABORTED for the completion status of the I/Os
aborted by reset will be reasonable and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c8181dd33453a330888cffa93505e6fc462f278
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The last patch ensures that the parent I/O terminate with failure
before continuing splitting process if one of child I/O failed.
This simplifies abort operation for I/O splitting.
Then we can use bdev_abort() and bdev_abort_io() nestedly.
Add necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I562bb6675f1fa380bc53dbe369138317ead66fe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Previously, bdev_io_split_done() had continued splitting process
even if the status became failed. To abort split I/O, this patch
changes bdev_io_split_done() to terminate with failure before
continuing splitting process if the status became failed. Add
necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd1ea49c22523e8c06fb45ebdcb2c84a57afd2ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2234
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to abort split I/Os. To abort any I/O by
bio_cb_arg, they have to be managed by the submitted I/O list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9459d9d2d3511aad0325dcc20d88610444a4ea04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having that transport can decide about particular ctrlr attributes not
globally but per ctrlr.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia3fb0d4e576cb9f8ce6df75f775e2fd5727d7f48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tracing functions introduce performance overhead
so by default keep them only in debug builds.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I08e0a139c3efa87b0f46b7e7a026b0676f3e8634
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
I missed a few files in this library the first time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ad55355e6348eaa10384a148dd45deb9f68fc2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK nvmf library. Their dependency had been removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc6c52ab41555d9b29afc3e16c1c3fd0bf5fc63a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI library still needs to include SPDK event library only for
shared memory ID to allocate shared memory for iSCSI top application.
We will move the code to module library separately later but remove
all other inclusion of SPDK event library in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21d77b9cc00c6a1f512546a6a0202c8fa5623bed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The UT can test the received aer reqs number and
check if the reqs are continuous.
Change-Id: Ifa1cb9dd4cdae5526fc80fe6c1b504ad9873d0f8
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2549
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the AER events in nvmf target from one to four.
Change-Id: Ie31988b49d68bdbc28ab2e09c783e681d3017e2b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2548
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This helps ensure thread safety on creation of the
netlink socket, when probe is called from multiple
threads at once. It is also a lot more clean - we just
create it once, rather than checking every time probe
is called to see if it has to be created.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I528cedc3ff44de6ea8ecaf6d2389226502ba408e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2681
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 79215d80c1.
Reason: Find the bugs while using batched. For example, if
we fetch 3 CQEs, A, B, C and put it in a cqes[] array.
Then we leverage io uring cqe seen to handle, Then we handle the
CQE A, then invokes the call back related with A. In A's call back,
it may also call the reap function (sock_uring_group_reap),
then the CQEs will be handled again. Thus the CQEs B and C can be already
handled. Then we will handle B or C again, then it triggers the error.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I67ece3b24e677b88d66d08722b00539693b42e1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2543
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I found this flag weird while debugging a lvol with
thin provisioned Blob, so make it consistent with it's Blob.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Iae555020d5781dfcf4d4f072a47e9573d35b8705
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds use of RDMA provider API to NVMEoF initiator.
Makefiles have been updated with new RDMA lib dependency
Change-Id: Ieaefeb12ee9681d3db2b618c5cf0c54dc52230af
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch updates NVMF target to use RDMA provider API
to create and destroy qpairs.
Makefiles have been updated with new dependency on RDMA lib
Change-Id: Iae35aea601380f8d1a6453a7fd6115f781e126f5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In current implementation, lib/vhost assumes that it always runs
together with lib/event, and would call lib/event's functions in
vhost.c. This is not necessary and make program unable to
create/destroy vhost module without init/fini the whole spdk env. It
would cause problems when program runs with vhost and other spdk
components together.
In this patch, we remove the dependency of lib/vhost on lib/event by
adding a global vairable g_vhost_core_mask so that it could handle
core mask by itself.
Signed-off-by: Kyle Zhang <kyle@smartx.com>
Change-Id: I38ceb92ac39b6980955346fda41e968aaead863d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1204
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
cache_free_buffers() was only used in the file deletion and unload, and
the file is also freed after that, so here we combine the cache free and
file free together and do the cache free in the cache thread.
Change-Id: I57e9a27c9a6467bcf6c85cd277db3b57e06c98e5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1795
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also poll thread in the UT to cover the thread context switch.
Change-Id: I3dc765b66aa707c36eb3913b3e0d2c1c3986e282
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1793
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This file isn't exclusive to the nvme lib. As such, it shouldn't
use the internal SPDK_LOG_NVME flag.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib6d239ad2e45e58fb97a5ea70b01ce72afa938c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2246
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were multiple ways to check if particular UT should be executed.
This script unifies those.
To allow executing unittest.sh as standalone script,
verifying config.h flags was chosen.
FTL is an exception, as it always compiles if built on Linux.
Same condition was kept to execute the UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I83b3a58d4574154166af6763e7d1c38d75b8475d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2019
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe spec defines "Keep Alive Timer" feature ID as optional and there
are targets that do not support this. SPDK fails to connect to such
targets.
This patch allows Get Feature "Keep Alive" target to fail with
INVALID_FIELD status. In this case we just continue with keep alive
timer value stored in controller opts structure. This value is already
communicated to target in CONNECT command.
Fixes#1328
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I52e7ea3cb66073ce6cc168a169989bd179041618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobid and md_page is claimed as first step of blob creation.
If blob creation failed, both should returned to be used by
other blobs.
This caused multiple reports of:
"Metadata page 1 crc mismatch"
when loading blobstore due to md_pages not actually containing
the written out md pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I495452c578d879f749281cebf8975eb2c1c7f79a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2057
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reduce library uses unlink, but the unit tests need to
override it in a specific way.
But linking unit tests with LTO requires the wrapper
definitions be in objects/libraries listed *after*
the object/library that refers to it. So we need to
make the unlink wrapper somewhat generic. We do this
by exporting a string and callback function that the
user can set to enable a user-defined function to be
called when unlink() is called with a specific file
name.
Also revert 3ef6d06 as part of this patch, since we
no longer require the workaround that it implemented.
Fixes issue #1357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ee4c424ad31fe7d91d7b524ed47aedd279e5b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: This can improve the performance.
Change-Id: I3f5526ab8716cb0771b5e193afa9a0dbffec5cc0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1929
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
idxd support is disabled by default right now due to being
experimental. Running unittest.sh would cause failure in such case.
With this patch idxd_ut only runs when it was compiled in.
Verifying if the UT was executed is done in post_processing.py,
by verifying every 'run_test' was executed.
Meaning that CI makes sure it is executed.
resolves#1369
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iafbc84839aa9dc62ead8821da8b860e1741e3624
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2012
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no point in setting this value on submission
and changing it on callback.
Since it is based on blob bserrno.
lvol_task is removed in next patch.
This change was motivated by lvol_op_comp() accessing
the task->status pointer on hot path for I/O.
There is no need to do so, so just pass status.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I17461fcf355f771f4de4e6d5ec1900d5042bd3d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1804
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The UT stubs weren't calling the assigned callbacks
and some weren't assering the passed values.
This will come in handy in next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I86eec58a28e40a93ff06b7e7c715c17d25e28818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1970
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
More tests will follow in later patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6c45b94cc17219acfae863c774fc7dbc33625c85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The qpair states should be maintained at the generic level.
Always going through the transport disconnect function is
one step in that direction.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I019b2b4a14fe192eff5293f918d633dde2c5400a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1851
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable really indicates when a qpair is
no longer connected. So NVME_QPAIR_DISCONNECTED is
actually much more accurate.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia480d94f795bb0d8f5b4eff9f2857d6fe8ea1b34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This should help reduce confusion within libraries about
which APIs are public and which are private.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7755081b016f269d4761d8cc2ce4bac2835c077d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1703
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, increment the library version since some non-public symbols have been removed.
Please note, SPDK_LOG_BLOBFS is included in the map file because it is used by the
blobfs_bdev module.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib05c0b6630951d97b1a5b2931746471eeb9d9630
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1702
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the following warning by allocating status dynamically.
In function ‘nvme_completion_poll_cb’,
inlined from ‘test_nvme_completion_poll_cb’ at nvme_ut.c:546:2:
/var/jenkins/workspace/unittest-nightly-autotest/spdk/lib/nvme/nvme.c:92:3:
warning: attempt to free a non-heap object ‘status’ [-Wfree-nonheap-object]
92 | free(status);
| ^
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I321b88414f431c8c18617d3ee882b8ab851a70fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1940
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As other small change, function iscsi_conn_pdu_generic_complete()
had been declared in conn.h but defined in iscsi.c. Move the
definition of it to iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bd796288036f78a7cba8a1c0af93bd6bc19e9cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1890
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The following patch will remove the "spdk_" prefix from iSCSI
internal APIs. The iSCSI global data g_spdk_iscsi is also local in
SPDK iSCSI library. Hence rename it by g_iscsi for consistency.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If35e9d58b1388fd725a505ee9be870e414c37ba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Remove spdk_ prefix from the name of internal APIs.
Add single underscore as the prefix of the function name to the
private functions if we see any conflict as a result of this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If0eabffbdb750db02866c1aa2b29b0c89fab1040
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Both for SCSI IO task and management task, append and execute
operations bad bbeen separated into different functions.
Append operation was for LUN reset, and separating into two different
functions was for clarification and readability.
LUN reset is sufficiently stable now.
Merging append and execute SCSI task into a single function is good
as API and enables us to do optimization.
For SCSI management task, merge spdk_scsi_lun_append_mgmt_task into
spdk_scsi_lun_execute_mgmt_task() simply.
For SCSI IO task, merge spdk_scsi_lun_append_task into
spdk_scsi_lun_execute_task() and do a small optimization.
The refined spdk_scsi_lun_execute_task() adds the IO task to the
pending list if there is any pending management task, executes all
existing penging IO tasks first and then the IO task if there is any
pending IO task, or executes the IO task directly otherwise.
Update unit test accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I26ffc4f4f62747d8cdecb90690f26cd58a9c17f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the following patches to optimize task
submission and remove the spdk_prefix from internal or private
functions.
To avoid using double underscores as the prefix of the function name,
separate pending task check and outstanding task check into
different functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieda54507bf4c781b60fa05d03cd32ca25948e430
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This unit test shows how the guest and host handle
the shared packed vring.
Change-Id: I4d02a22a225a7945bfe4a2691d917adae86661d6
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the size of input buffer is larger than 16 and not divisible
by 16, the final line will keep part of the characters of the last
line. For example, if I want to dump "spdk dump 16 more chars",the
output is:
00000000 "hexadecimal" spdk dump 16 mor
00000010 "hexadecimal" e charsmp 16 mor
But the correct should be:
00000000 "hexadecimal" spdk dump 16 mor
00000010 "hexadecimal" e chars
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Iaf3f33c5ce68920ada83c59277f89a547e8030d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should be giving completions for all requests when we destroy a qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I802f5120f2e8289aa825872f8085ac21b5fce0f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
NVMe ctrlr init state machine shall be async whenever possible so it
is not blocking other code from processing. It can result in deadlock
when cmd producer and consumer are sharing the same thread.
This patch is making identify active ns async by introducing new
state to wait for completions.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I346d35bab4733d3941e023602854fdd5b1ef23b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
It is a prework for changes related to ctrlr init state machine.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If289580f65ae27468b659a7ea07a4e4298876e77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Lack of this initialization cause compilation error on release builds.
bdev_raid_ut.c: In function ‘test_multi_raid_with_io’:
bdev_raid_ut.c:2007:3: error: ‘ch_ctx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2007 | verify_io(bdev_io, g_max_base_drives, ch_ctx, pbdev,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2008 | g_child_io_status_flag);
| ~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2221aa1d78d640439d5876a781a0d173a370e2a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch creates a test case to simulate nested I/O channels by
generic bdev layer and bdev modules. The nested level of I/O
channels is two at a maximum now but the nested level of the test
case is three.
Besides, any poller registered on the nested I/O channel is not
visible to the upper layer. So include such pollers into the test
case.
By combining thread termination, test the fix for the github issue
is correct.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6a04d753e462cdaba7364678b5118c45b09708ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Set 5 seconds timeout to wait until exiting thread is exited into
spdk_thread_poll(). After the timeout, collect error log and then
move the thread to exited forcefully.
Add necessary unit test case accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied8f58a2023a3bbe098530810fd3288bef93c3e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extract _spdk_thread_exit() from spdk_thread_exit() and
_spdk_thread_poll() calls _spdk_thread_exit() if the thread is in
the exiting state. spdk_thread_exit() changes to move the state to
the exiting state. The spdk_thread_poll() loop will end after the
thread moves to the exited state because the caller of
spdk_thread_poll() will check if the thread is in the exited state,
and break the loop if true.
If the user does not call spdk_thread_exit() explicitly, the reactor
has to terminate all existing threads at its shutdown. In this case,
multiple threads may have some dependency to release I/O channels or
unregister pollers. So the reactor has the large two loops, the first
loop calls spdk_thread_exit() on all threads, the second loop calls
spdk_thread_destroy() if exited or spdk_thread_poll() otherwise for
each thread until all threads are destroyed.
Besides, change the return value of spdk_thread_exit() to return
always 0. Keep it for ABI compatibility. Change ERRLOG to INFOLOG
for _spdk_thread_exit() because it is called repeatedly now. Remove
the check of I/O reference count from _spdk_thread_exit() because
_free_thread() cannot free I/O channel. Refine the unit test
accordingly.
Fixes issue #1288.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee5fb984a96bfac53110fe991dd994ded31dffa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Compiling with warning:
nvme_poll_group_ut.c: In function ‘test_spdk_nvme_poll_group_add_remove’:
nvme_poll_group_ut.c:268:8: warning: ‘tgroup’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
qpair = STAILQ_FIRST(&tgroup->active_qpairs);
tgroup may can't be initialized as:
if (tmp_tgroup->transport == &t1) {
tgroup = tmp_tgroup;
} else {
CU_ASSERT(STAILQ_EMPTY(&tmp_tgroup->active_qpairs));
}
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Id915e651f73ca3814a7e8d3f95c8793b8b880990
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the caller had to check if thread is not exited when
it calls spdk_thread_exit().
Subsequent patches will change return type of spdk_thread_exit()
to void, and so include the check int spdk_thread_exit() in this
patch.
If spdk_thread_exit() is called when the thread is already exited,
collect INFOLOG and return normally.
This will make the next patch a little easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8b94261575e770485b33c0b37e76e770b77b417c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently nvme_completion_poll_status object is allocated using
malloc, so it may cotnain some garbage. In some scenarious
nvme_completion_poll_cb can be triggered before we enter
spdk_nvme_wait_for_completion_*. In that case status object
will be freed by nvme_completion_poll_cb if it contains a
garbage in `timed_out` field. Later spdk_nvme_wait_for_completion
will work with already freed memory.
Fix - allocate nvme_completion_poll_status object using
calloc and explicitly zerofy it before usage
Fixes#1292
Change-Id: Iac39653a6cd102471de16e65814f0760bbeda7d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use SPDK thread library in unit tests for compress bdev. This will
enable us to write unit tests for refactoring.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac3867cca460b998c9b3953aae5241ffddc3168b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.
This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.
This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930
lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.
Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously the SPDK NVMe driver always set PSDT to 01b for hardware SGLs
which is aligned to the Linux NVMe driver, for this case the metadata length
is not required when filling the NVMe command fields. There is no alignment
nor granularity requirement for Data Blocks for PSDT 01b case. And if the
drive reported that it needs dword alignment with SGL, for this case, when
using spearate metadata, it needs a length parameter to fill the SGL descriptor.
Change-Id: I56ffaada775fe66de7637dae15b509ee9556e80a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Currently SPDK rejects Connect command when subsystem is not active.
This change allows to queue Connect command and execute it when
the subsystem goes back to active state. To queue the command we
should know subsystem_poll_group, in current implementation
this poll_group is known only when controller is already created.
To get the poll_group for Connect command we can retrive subsystem
subnqn, find subsystem and get poll_group by subsystem->id.
Increment subsystem_poll_group->io_outstanding even for Connect
cmd in order to prevent subsystem change state during the
connection process. Update spdk_nvmf_request_complete -
decrement io_outstanding for Connect cmd.
Fixes#1256
Change-Id: I724abb911696d7234a9c9d27458eba24739b26fd
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1273
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This unittest uses CU_add_suite_with_setup_and_teardown()
which was added in CUnit 2.1-3 released over 5 years ago.
This is the most commonly packaged version of CUnit on
not EOL'd distributions.
Unfortunetly there is incorrectly created package on CentOS7.
CUnit-devel-2.1.3-8.el7.x86_64.rpm despite its name
contains CUnit 2.1-2.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5ebf9973b1f3df9ff6cc1f0dc61dcf691096605e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This kind of changes are now done through out the UTs in SPDK.
Patch here just adds them here as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I66fc06bbea038e328ba27bdea58b6e6479eee122
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
lvs_load, lvols_load and lvol_open were already added to the suite.
Commit 2f22884 mistakenly added those three when adding lvol_refcnt.
To remove those UT actually fixes earlier in the series were required,
as incorrect errnos were checked before and this specific order of
UTs set the right errno between them.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7188be49171b6254146c6d144f9a54a689151b60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1486
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Simply some of the functions can be replaced with the stub
defines, so they were.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3095855c02c605fe0d66ee720a5025cdd8933873
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are three types of callbacks in lvol library:
- void(cb_arg,lvs,errno)
- void(cb_arg,lvol,errno)
- void(cb_arg,errno)
First two are used in cases where result of operation is
either lvs or lvol.
Last one is used for any operation that does not produce
either.
There is no need to keep more than one callback function
for last one, since they all are doing the same thing.
lvol_op_complete(), lvol_store_op_complete(), close_cb() and
destroy_cb() are now replaced with op_complete().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idd8fcf327ef56ad7d27e2e31cad9ddc44c80e5c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1484
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There were two variables (g_lvserrno and g_lvolerrno) to
assign and check after operations.
This caused issues when developer mistakenly created callback
that assigns one and then checks the other.
This UT is ran to completion each time and only single operation
is done at once. There is no need to account for both.
This patch removes g_lvolerrno.
Next one will simplify callbacks.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7d16b1913c13de56e1df2f5e36db11f15430979b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This file is not included in any other test files and it isn't compiled.
It appears to be a remnant of when we had distinct vhost_blk and vhost_scsi
unit tests.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0b29d9e601f9d86b51cf8ba52ec5dc96bd02eef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1310
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We only set the flag to false when the controller reports SGL supported
and can use byte contiguous buffer. Also check the data block's alignment
for hardware SGL.
Change-Id: Id936c49823963000d0543fc95fbb6edba3118feb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Update spdk_thread_poll() to count SPDK thread stats correctly on multiple
SPDK threads per reactor configuration.
spdk_thread_poll() gets start time and reads TSC at end as end time,
and then gets delta between them as run time. Run time is added to idle
time or busy time according to the result of polling.
Reactor overhead is included into the next thread which calls
spdk_thread_poll() now.
spdk_thread_poll() saves the end time to the current thread to use it
as the start time of the next thread.
Unit test framework for this patch and the next patch need to access
thread->tsc_last. In the next patch, reactor will use the end time of
the current thread to the start time of the next thread in reactor_run()
to realize the idea.
Hence add an new API spdk_thread_get_last_tsc(). The corresponding
variable is named as tsc_last and it is good and is aligned with
DPDK (DPDK has used tsc_start and tsc_end as variable name). But
last_tsc will be better as API name because the last TSC value is
easier to understand.
Then add necessary unit test and update the unit test framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e465e9283c032acb427576d0c90f9e1414f2271
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
super->clean value signifies if blobstore was unloaded
cleanly.
If it was not, then during bs_load the _spdk_bs_recover()
procedure if called.
Meanwhile bs->clean is always set to 1 after load, causing very first
blob_persist to also re-write super block with the super->clean
set to 0. To signify that md has changed and possibly trigger
the recovery if clean bs unload does not occur.
When the re-write of super block succeeds the bs->clean is set to 0,
because further re-writes of super block are not needed on next
blob persist.
This patch resolves issue when:
1) reading super block fails - execution should backoff, to prevent
writing an empty buffer as super block !
2) writing super->clean = 0 to the super block fails - execution
again should fail, and bs->clean should not be set to 0. It will
cause next persist to attempt re-write again.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia07cc5c6c107310059b50886edb7283c176b9169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change verifies that not only it is possible to open
the snapshot, but also the spdk_bs_create_snapshot() reported
success.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifb7fcc91802c838710f1f9be41090057268a5900
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blob_create_snapshot_power_failure() test always attempted
snapshot creation until the snapshot did open.
Which meant that on bs reload after dirty shutdown,
the original blob might be in unrecoverable state.
UT did not verify create call beyond that point.
Next patch will stop after snapshot is possible to be opened,
AND the spdk_bs_create_snapshot() returned success.
This patch makes it easier to recreate same starting
conditions after snapshot did not open.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1901b29a8319b2203a855e7879821ed3850f4917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In general it is not possible to delete snapshot when
there are clones on top of it.
There is special case when there is just a single clone
on top that snapshot.
In such case the clone is 'merged' with snapshot.
Unallocated clusters in clone, are filled with the ones
in snapshot (if allocated there).
Similar behavior should have occurred for extent pages.
This patch adds the implementation for moving EP from
snapshot to clone along with UT.
The UT exposes the issue by allowing delete_blob
to proceed beyond just unrecoverable snapshot blob.
Fixes#1291
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib2824c5737021f8e8d9b533a4cd245c12e6fe9fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1163
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to add the async network I/O support in
sock layer. If code is configured with I/O uring, --with-uring,
we can use io uring in Linux (version >=5.4-rc3).
PS: We also make VPP's default priority > uring, because
for the iSCSI or sock test linked with VPP. It tests VPP with
a given address (which is not a special VPP can only open address),
so using uring can also listen those address succefully. And if we make
uring with priority > VPP, actually, VPP will not tested in those cases.
Additionally, the current CI pool is not ready for test, we need
wait for the CI system ready. And I test on my local platform, it works.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie8ee3c8ddf8d2a7264f2b382376733e002816dcc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/952
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the macro SN32_LT and SN32_GT had been added to iSCSI
library. But such comparisons may be used in other libraries.
So add two inline helper functions spdk_sn32_lt() and spdk_sn32_gt()
to include/spdk/util.h.
Add unit test for these functions. These functions are located in
header file but math.c is the place if they are located in source file.
Hence add unit test as the one for math.c.
The next patch replaces the macro SN32_LT and SN32_GT by
spdk_sn32_lt() and spdk_sn32_gt() in iSCSI library, respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id3e4d80fea98ad4ae1516e27b9c9e8ec6f37e7a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1346
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe specification in ch.7.6 "Controller Initialization" suggests to
use only Set Features "Number of queues" command and says nothing
about Get Features. All required information is available after Set
Num Queues step.
Fixes#1270
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ide38ba9c7f063f1d6b13bfce4232c588cc906784
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
blob_delete_snapshot_power_failure() test always attempted
snapshot deletion until the snapshot did not open.
Which meant that on bs reload after dirty shutdown,
the snapshot was in unrecoverable state.
UT did not verify delete call beyond that point.
Next patch will stop after snapshot is unrecoverable,
AND the spdk_bs_delete_blob() returned success.
This patch makes it easier to recreate same starting
conditions after snapshot did not load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e14e8dadaaef4aa3287ebd376465253466b2362
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1162
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit ea5ad0b286.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I333bdf325848e726ab82a9e6916e1bbdcd34009c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that a namespace can be depulated asynchronously now, the NVMe bdev
module should also be finalized asynchronously, after all namespaces and
controllers are deallocated.
Change-Id: Ic082fec8e31e9bd5ee1c698cd8dfca9f248776d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch adds the ability for a namespace to be depopulated
asynchronously. Currently both regular NVMe namespaces, as well as the
OCSSD ones are depopulated synchronously, but it'll be changed in the
upcoming patches.
The nvme_bdev_ctrlr.ref is now not only tracking the number of bdevs
created on that controller, but also the number of populated namespaces.
Change-Id: I7b112d9b0d41739f3dc7d427e9da340843128c54
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add thread_count to struct spdk_reactor to count number of threads
per reactor. This number will be used in the next patch to know
if all threads are idle or not for each reactor to support CPU
power saving.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f7cc5a6b78d85e9f8d0b539c60058c13e282759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added new setup/cleanup functions for a suite of
unit tests that use a particular blob through out the
tests.
This simplifies the contents of particular UTs,
and brings forward focus of each UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib7d69b90fcbe8e6a0ba303475fcbaeb90fa110a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the unit tests were only closing a blob,
without deleting it at the end of unit tests.
This is valid behaviour, but to later simplify
the setup/cleanup - a delete blob was added.
This change was made to unit tests where,
it was not focus of particular UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e338ba6fcb63af26658e8968971a6d56f70807b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1203
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Operation of closing and deleting a blob is common
throughout the tests.
This patch creates helper function ut_blob_close_and_delete(),
to do exactly that with the right asserts.
Throughout the UT this function replaces all instances where
blob is closed and deleted, when it is not the subject of
particular unit test (focus is on other functionality).
It will allow to later use it in setup/cleanup functions
for UT suite - similar to bs init.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic56594da8cd4c442b62890d62961b44771059679
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Operation of creating a blob (with or w/o opts),
then opening it through out the tests is quite common.
This patch creates helper function ut_blob_create_and_open(),
to do exactly that with the right asserts.
Throughout the UT this function replaces all instances where
blob is created and opened, when it is not the subject of
particular unit test (focus is on other functionality).
It will allow to later use it in setup/cleanup functions
for UT suite - similar to bs init.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia541b855d154503f824bfa3909bcfeac649c5853
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Always call API on blobid that was received from blob
create, instead of relying on global one.
Where necessary added declaration and assignment.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3529b4d5e86c1301bb64268029a57873f9f600cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Always call API on pointer that was received from blob
open, instead of relying on global one.
Where necessary added declaration and assignment.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I15531111201d071c471f5be79ce18ff508631677
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A lot of unit tests require only creation of a blobstore
then unload it at the end.
This code can be made common and invoked automatically by
CUnit with CU_add_suite_with_setup_and_teardown().
Those functions are called before and after each test in suite.
This should simplify the unit tests by removing the common
code.
Following patches will add further suites with different
setup/cleanup to reduce common code even more.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I984cde2381f4461e188e06050355024a88ebfca9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Next patch in series adds setup/cleanup functions
that use g_bs for its operation.
Particular unit tests should not leave the g_bs
unassigned, if cleanup is supposed to unload it.
It applies to helper functions to reload/dirty_load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6e022b6c762981c2c70ebf31f4981a17f54f3591
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the unit tests initalized bs opts,
event if they were left unmodified.
There is no need to perform this operation,
as spdk_bs_init() can accept NULL as bs_opts parameter
to just initialize default values.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iacea1fa9d53796b8c359b611092cc63c6bce4094
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the error print if there is still remaining_size in
order to provide more meaningful debug info.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7b15c9c9a630ea7ecb2d3191b73c9c99f7febf31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1189
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
subsystems
This is optional and most transports will not implement it.
Change-Id: I51e0f1289b0e61a8bdb9a719e0a2aae51ecb451c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds better check if the xattr was removed.
It will identify potential bugs when first md sync
takes precedence over the second md sync.
As per suggestion in
https://review.spdk.io/gerrit/c/spdk/spdk/+/774/6/test/unit/lib/blob/blob.c/blob_ut.c#7655
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I463f2455614ef11cc1512dc2fb1972ba1f024337
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Operation of dirty shutdown of blobstore and reloading
it occurs often enough in UT to provide a common function
to perform it.
Added ut_bs_dirty_load() to facilitate this.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0079dfabd64eaec6495db02fe200be1d6116f0c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Operation of unloading and loading blobstore
occurs often enough in UT to provide a common function
to perform it.
Added ut_bs_reload() to facilitate this.
Couple occurences in this patch actually fix
test cases where mistakenly opts were not passed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib46ed395cd134feaa540e00a334ae861872b3ef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Couple unit tests were still refering to g_bs pointer,
rather than the one local to particular UT.
This patch fixes this.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If343eb561a48c4547d499139d76e1db6b2d7f3bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we will free the cache buffers in the file R/W
data path, however we can start a thread to do the cache
buffer reclaim regulary, so that we don't need to free
the cache buffer in the Rocksdb thread context. By
doing this, we can also remove the global cache buffer
lock in following patches.
Change-Id: Icb0fbc49baecd1e9d86a5fcfe400758dfc3c53a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To avoid the starnge formatting, typedef has been used. But this comment
is hard to get the meaning. So stop breaking after return type for this case.
The strange formating is
struct spdk_scsi_dev *
spdk_scsi_dev_construct(const char *name, const char *bdev_name_list[],
int *lun_id_list, int num_luns, uint8_t protocol_id,
void (*hotremove_cb)(const struct spdk_scsi_lun *, void *),
void *hotremove_ctx)
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20c30b225b3b96fa9207b4a89e3210c8a97fb1d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add raid5 module and unit tests. Use './configure' with option
'--with-raid5' to enable it.
Change-Id: I9f07da8c3567fa65499444899c899adaa2e29550
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/855
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
If we did not configure with "--enable-debug". it will
trigger the compliation failure since this function is
not defined.
Change-Id: Ia1795da736be55d4dd1418a2e74edefff7797f11
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1097
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When running unittest_thread in fedora29 with memcheck, there is
error "Conditional jump or move depends on uninitialised value(s)"
in for_each_channel_unreg test.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I38abf4c70ff513e39232b83357d571dded8f02c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Replaced single global write buffer with the per-io_channel write
buffers. This means that the "rwb" module and all of its references
were removed and replaced with the recently added interfaces.
Change-Id: Idc899d3a4d63a8a2bede1ac26549ed06e9a2e784
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Added queue responsible for keeping track of full, ready to be written
batches. A batch might be put on this queue in case it'd already been
filled, but could not be written out due to lack of resources or it was
written out, but failed and needs to be resent.
Change-Id: Iba49cd359425300d21b8100f13f17189e99d4c7c
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Two functions were added:
- ftl_get_addr_from_entry() returning an address pointing at a given
entry
- and it's inverse, ftl_get_entry_from_addr(), returning a write buffer
entry for a given address
Change-Id: Iea1e2e59f240f50183fdb549280a0f0b722efbef
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds the ftl_batch strucutre, which describes a single batch
of data to be written to the disk. It's comprised of multiple write
buffer entries (the actual number depends on the write unit size of the
underyling device).
Additionally, a function responsible for filling out a batch was added.
It iterates over available IO channels and dequeues submitted write
buffer entries until a batch is completed. The IO channel queue is
shifted, so that each time the function is called a subsequent IO
channel is used first, which guarantees that all channels are treated
fairly.
Change-Id: Ie61d8c6cb51d5c5175540c975447bc27590c5cb4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added functions responsible for acquiring/releasing write buffer entries
from the per-io_channel caches. They're also in charge of limiting user
writes by reducing the number of available entries to the user.
Change-Id: I23adfe36065139036f9b72a016e34fbf6eb29230
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The IO channel pointers are now stored inside an array of the device
they belong to. Once write buffer entries are tied to IO channels,
it'll provide a method for dereferencing an entry from its address.
Change-Id: Iaf401525eb0f5af8dc6047a1dc8bae11b56761d7
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the first patch of a series that replaces single global write
buffer with per-io_channel buffers. This change is intended to improve
performance for multithreaded workloads.
This patch changes the way the ftl_io_channels are allocated by only
keeping an ftl_io_channel pointer inside spdk_io_channel's context. It
allows for delaying IO channel destruction, which in turn allows the FTL
to iterate over all exisiting IO channels without locking.
Change-Id: I5e0cab8043a2b5f747e971dd3d65ed2546c8cf26
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/900
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a flag resched to check if reschedule operation is requested
to struct spdk_lw_thread. Add _reactor_resquest_thread_reschedule()
to set the resched flag, and add it to the case SPDK_THREAD_OP_RESCHED
in spdk_reactor_thread_op(), and return true in the case
SPDK_THREAD_OP_RESCHED in spdk_reactor_thread_op_supported().
Then _spdk_reactor_run() checks if the resched flag is true for each
thread. If true, set the resched flag to false, and remove the
thread and call _reactor_schedule_thread(). Add continue to avoid
use-after-free issue for both reschedule and terminate cases.
This idea follows voluntary thread termination and will remove our
worries for all complicated rare cases.
Add unit test case to verify this update.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I656872d32dbb469ae70f771cd0419a77236bfe18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since ftl supports only one core thread ftl_thread
structure is not needed anymore.
Change-Id: I66eda9249d74b3eff0c4473dcd0aba4a6135e296
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add tests for the following features:
- SPDK_NVME_FEAT_TEMPERATURE_THRESHOLD (4),
- SPDK_NVME_FEAT_ERROR_RECOVERY (5),
For Temperature Threshold feature the validity of the THSEL and TMPSEL
is covered as described in the NVMe spec (1.4):
"Figure 279: Temperature Threshold – Command Dword 11"
For the Error Recovery feature the validity of the DULBE is covered
as decribed in the NVME spec (1.4):
"Figure 280: Error Recovery – Command Dword 11"
Random value is selected for the lsb in the cdw11 (0x42).
Change-Id: Ia57ab4d79439ec315ddc9bbfdad8400aa926062a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the prefix "spdk" from spdk_reactor_schedule_thread(), add
spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
For SPDK_THREAD_OP_NEW, spdk_reactor_thread_op() calls
_reactor_schedule_thread() and spdk_reactor_thread_op_supported()
returns true.
Then replace spdk_thread_lib_init() by spdk_thread_lib_init_ext()
with spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I232a3b2c6bcaf4d86b0dd3cefacd3e47eadda6d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add enum spdk_thread_op and two function typedefs spdk_thread_op_fn
and spdk_thread_op_supported_fn.
The first operation type of enum spdk_thread_op is SPDK_THREAD_OP_NEW,
and it is used as an alternative to spdk_new_thread_fn.
Add global variables, g_thread_op_fn and g_thread_op_supported_fn, and
then add spdk_thread_lib_init_ext() to initialize these.
spdk_thread_lib_init() requires both of thread_op_fn and
thread_op_supported_fn are specified or not specified.
spdk_thread_create() calls g_thread_op_fn() with SPDK_THREAD_OP_NEW
if g_new_thread_fn is NULL, g_thread_op_supported_fn is not NULL,
and g_thread_op_supported_fn(SPDK_THREAD_OP_NEW) returns true.
Update unit test to test these addition.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56db903f62437f6ff3198248ffc5dede396c22bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a warning triggered when holding ref to const obj and passing
to these getters.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2c7b4ea0d325d84d66923fc524273ea44a3a311b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: Ib95e8d190bd87158ae1ecc6698da95ccc4ba9579
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/992
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are synchronous security send/receive APIs defined in nvme.h,
however, we still need the asynchronous APIs so that we can make the
OPAL library can be used in asynchronous way. As the asynchronous APIs
are already defined in nvme_ctrlr_cmd.c, so just export them to public
APIs.
Change-Id: I5646f342a4bf70faad37daa956476f05a1327bcc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When running unittest_nvmf in fedora29 with memcheck, there are
many errors about "Conditional jump or move depends on uninitialised
value(s)". The failed tests are:
in ctrlr_ut:
test_reservation_notification_log_page
fused_compare_and_write
in ctrlr_bdev_ut:
spdk_nvmf_bdev_ctrlr_compare_and_write_cmd
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ib1e6a744e86876c15ee53206909364e853574dd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/965
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
while the size of namespace is changed,
the resize event will be notified.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Change-Id: I5d85f17df898dc21c0ae1eb9f529dcb624a457ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/849
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Always call API on pointer that was received from blobstore
initialization or load, instead of relying on global one.
Where necessary added declaration, assignment and asserts.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic4198ac984c13a8b77428deaa32ce9864e6750c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies using CU_add_test() function.
Test name no longer needs to be provided,
instead test is named after test function name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9f5d9e0d8e72ab36b2a5c04e33c336e6c0a1fa6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Failure to prepare CUnit for tests is always a fatal error,
and application exits.
Most test managment functions in CUnit set some CU_ErrorCode,
that can be retrived by return code from a function or CU_get_error().
Thus usual structure of UT in SPDK checked every output from every
test managment function.
There is a helper function CU_set_error_action() that when set to
CUEA_ABORT, will abort the application run with proper error return code.
Along with nice error message.
For example if one were to add same UT twice:
"Aborting due to error #32: Test having this name already in suite."
Application return code set to 32.
Using CU_set_error_action(CUEA_ABORT), removes the need for error checking
on test managment functions in CUnit.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ida7de5e040b714509e79957d47a006ee518a42b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Expands blob_simultaneous_operations to cover case
when second md sync is perfomed without waiting for the first
one to complete.
The blob state is forced in UT, but in normal usage could be
changed by modifying xattr, allocating thin clusters or other.
Related to #1170
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I880d289cdf957d4513c080efdcb7a5d8c6b3b447
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This new UT is checking validity of md sync being run
along another md sync with changed metadata.
At this time added case where first md sync is being
interrupted by removal of xattr with second md sync.
This interruption is perfomed at increasing number of
poller executions, until the number is enough to
complete first md sync.
There are two expected states of used_md_pages array,
either with xattr or without. The state is verified
after md syncs.
This UT will be expaned in similar manner by other
operations (than xattr) that casue changes in persisted metadata.
Related to #960
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I251dca92ffc3080d8dc503a7f1ff342aa59adef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Making use of recently added utility to poll exact number of times.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I23a9dc702c899285626522ace8ec77a9ba0f7757
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To make room for other raid module unit tests.
Change-Id: Icf8b8ff0c9051ccb4c7ebd784807370f8be1a8fb
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/853
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow ftl_io initialization with a iovec array instead of a single data
pointer. It'll make it possible to use the vector version of the IO
commands.
Change-Id: I34c1e398cea681f59321605e081366785aa29128
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is memory optimisation as transport id is 'heavy'. As a side effect
simpler handling of listen and stop_listen on transport specific layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4e9d0e0c5eee2d570ec4ac9079270c32d5afb8db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Dry run processing in iscsi_parse_portal() now only checks if
portal string is not NULL. Portals are managed not by fixed size
array but linked list now. Hence dry run processing is not needed
itself now.
So remove the dry_run parameter from iscsi_parse_portal() and
the dry run loop in iscsi_parse_portal_grp().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib7cb444b51581b8ee603388aad34bc58d1cc9023
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The next patch will create a SPDK thread for each poll group at
startup. Hence iSCSI configuration management will be done by
different thread from these poll group threads.
Hence send message explicitly to add connection to poll group even
at startup. We can do this for the current master branch.
Remove some code related with SPDK thread framework from unit tests
for iSCSI portal group because thread management is moved to
connection.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I40cacdb2066f65866f7ef83cf3b3e4e8b8cd322e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows to avoid calculation of ioccsz bytes on each request
and removes access to "cold" ctrlr structures in data path.
Add UT to check validness of calculation
Change-Id: I55ceff99eb924156155e69a20f587a4f92b83f0b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When running sock_ut in fedora29 with memcheck, there is an error
"Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised
byte(s)".
Signed-off-by: richael zhuang <richael.zhuang@arm.com>
Change-Id: Iaddb85ed2da2f45e200569c936f05174bc89c99b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
The comment in the header file has already said that all associated
I/O channels must be released before calling spdk_thread_exit().
This patch actually checks if it is satisfied in spdk_thread_exit().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ac50b561c6ca91d3dc2d60c21c8d91d38f081b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EBUSY if the thread has any
registered poller. We enforce all pollers including paused poller
are unresitered before the thread is marked as exited.
By this change, a bug was found in reactor_perf test tool. Fix it
by adding spdk_poller_unregister() and add the g_ prefix to avoid
future potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7f40357c9a6f4101b3998ea0da3cc46cc435031
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EINVAL if the thread is already
marked as exited. This will be helpful to detect wrong call sequence
of voluntary thread termination.
Besides, update reactor shutdown and unit test framework shutdown
to incorporate this change accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2296c61e273bf4d9580656dcbc2da0e8a8f3bcf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
By the last patch, the asynchronous release of I/O channel will
complete even after spdk_thread_exit() because pending messages will
be reaped.
Then this patch stops new allocation of I/O channel after
spdk_thread_exit().
Hence we will be able to release all I/O channels for exiting
thread within finite time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I48a45bcba7c4b2c62d8c9d398ac35a584b533627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Previously, the exiting thread had discarded all pending mesasges.
We change this to stop accepting any new message in spdk_thread_send_msg()
and reap pending messages in _spdk_msg_queue_run_batch().
Add unit test case for the new behavior. Adding g_ prefix to global
variables for clarification is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ida78e7bb1b86357602aea6938dd514897b67edd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The test case for_each_channel_remove() did not have any
assertion and the count was not incremented correctly.
This patch fixes several issues in for_each_channel_remove()
by counting spdk_get/put_io_channel() and spdk_for_each_channel()
correctly and achieves what we wanted to do in this test case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iceffd924f8887452bd7dad48e30d121874ab0b05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the recent changes which added usage of writev_async to
both TCP target and initiator, nvme_tcp_pdu::writev_offset
becomes useless since it is not updated in data path. This
field is only used in UT. Remove this field from nvme_tcp_pdu
structure, now nvme_tcp_build_iovs builds iov which fully
describes the PDU. Update UT accordingly.
Field padding_valid_bytes is not used at all, delete it too
Change-Id: I2d6040ae64d6847cb455f59f65ec5677de8e5192
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483374
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_put_io_channel() was designed to be called on the same thread
that called spdk_get_io_channel(). spdk_put_io_channel() sends a
message to its own thread, to allow the context to unwind before
releasing the resources. This had the side effect to allow an
incorrect thread to call spdk_put_io_channel(). This patch will fix
that.
Bdevperf tool had a design flaw that needed the side effect, but
it was fixed recently. We do not know if we have any other case.
Hence add assert to spdk_put_io_channel() to find other case.
We found that unit test for blobstore had called
spdk_put_io_channel() and fix it together in this patch.
Besides, correct the comment for spdk_put_io_channel() in
include/spdk/thread.h not to create any other case in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ec7bf074818abef43b23ca40bc9385adac70a75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479390
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This internal interface allows to create nvmf ctrlr and connect io
qpairs on add listener rpc request (i.e. when subsystem is stopped
and listener is not yet on subsystem's list).
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I998cb72ed773094faacc6668cf069ba9e2a6bf50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481409
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Had to remove one part of a unit test because the null
checking is moved to a different function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I0a95d0a9a9a5708416fdc7efefb36e17b1ffe010
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480008
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
When attempting to decode a base64 string, while there is a way to
calculate the maximum possible decode length, there isn't a way to
calculate the exact decode length without duplicating some base64
specific logic located in spdk_base64_decode. With this change, the
spdk_base64_decode function can now optionally calculate the exact
decode length without actually performing the decode by passing NULL
in as the dst argument.
Change-Id: Ice83db979f86a6fe9f39d236d3083102ca37ec68
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extent table and extent page descriptors are now
set to be default way clusters are serialized on disk.
With this patch UT are ran with and without
extent table.
Changed two asserts in test, since amount is dependent on
which type of serialization is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica58fce6a4effd014d7dd40ee26edd0fa3196d0f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This will be used to add another run of whole UT suite
with extent pages on/off.
Next patch in series will be enabling both types of
extent serialization for all UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia8b4b8822edefb90ffc13cf777885f9af95e4545
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
All the non-ext version of the call is doing, is calling
ext with NULL as opts. Then default opts are used in
its place.
This change was facilitated by next on in series,
where all blob opts will be initalized in UT
with parameter use_extent_table either set to
true or false.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I62b642c1808b38a5f7c94a5900f25f4978a4ec39
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
A pointer to a stack variable is passed as an argument to
nvme_completion_poll_cb function, later this variable is used
to track completion in the spdk_nvme_wait_for_completion() function.
If normal scenario a request submitted to the admin queue will be completed
within the function which submitted the request.
spdk_nvme_wait_for_completion() calls nvme_transport_qpair_process_completions
which may return an error to the caller, the caller may exit from the
function which submitted the request and the pointer to the stack variable
will no longer be valid. Thereby the request may not be completed at that time
and completed later (e.g. when the controller/qpair are destroyed)
and that will lead to call to nvme_completion_poll_cb with the pointer
to invalid stack variable.
Fix - Dynamically allocate status structure to track the completion;
Add a new field to nvme_completion_poll_status structure to track status
objects that need to be freed in a completion callback
Fixes#1125
Change-Id: Ie0cd8316e1284d42a67439b056c48ab89f23e0d0
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481530
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
After creation of blobs in both tests, only clusters indexed from
0 to 10 are supposed to be used. Index 0 for md and 1-10 for data
of single blob since it was create thick provisoned.
Cluster allocations are done in order so if there was a bug for
overflow amount of clusters claimed, first in order would be
one with index 11.
This patch adds asserts after each bs load for first data cluster
that is supposed to be used and for first data cluster that is
not.
During the tests those should remain constant.
When creating/deleting snapshots, the blobs are affected
by changing their type to/from thin_provisioned.
Added asserts to verify their state at every blob open.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I38418da55850d5b8468e578b3c42c5b817ae8045
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482661
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
g_bserrno from blob deletion or snapshot creation,
should not be checked. It is implementation
dependent whether the error (or success) from those
calls actually means that enough data was persisted
on disk.
This test case should work even if we set the threshold
high enough that no failed opperations occur.
On the other hand some parts of those calls do cleanup
in them, meanwhile there is enough metadata data on disk already.
Such as cleaning up unused clusters or pages issue
writes, but at that point the blobs already are in expected
state.
Thus removed assert for g_bserrno, as failure is not indicative
of impossibility to recover.
While here, removed the spdk_bs_unload(). This UT are for
testing power fail safety. Never should it be the case that
enough writes occured in create/delete, but blobs are not
in the expected state.
When such bug would be introduced, it could be covered up
by spdk_bs_unload() cleanly closing up the blobstore.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic69c3061f2cc1fe04bf895632cdb11efb2fe6912
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482660
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extent Pages claim and insertion can be asynchronous
when cluster allocation happens due to writing to a new cluster.
In such case lowest free cluster and lowest free md page
is claimed, and message is passed to md_thread.
Where inserting both into the arrays and md_sycn happens.
This patch adds parameters to pass the Extent Page offset
in such case.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I46d8ace9cd5abc0bfe48174c2f2ec218145b9c75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If available, automatically use MSG_ZEROCOPY when sending on sockets.
Storage workloads contain sufficient data transfer sizes that this is
always a performance improvement, regardless of workload.
Change-Id: I14429d78c22ad3bc036aec13c9fce6453e899c92
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
With our target design, there's no advantage to sending
multiple R2T PDUs per nvme command. This patch starts by
setting up the math so that at most 1 R2T PDU is required
per request. This can be guaranteed because the maximum
data transfer size (MDTS) is pre-negotiated in NVMe-oF
to a reasonable size at start up.
It then proceeds to simplify all of the logic around mapping
requests to PDUs. It turns out that the mapping is now always
1:1. There are two additional cases where there is no request
object at all but a PDU is still needed - the connection response
and termination request. Put an extra PDU on the queue object
for that purpose.
This is a major simplification.
Change-Id: I8d41f9bf95e70c354ece8fb786793624bec757ea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479905
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
We can always accept up to the maximum I/O size in an H2C,
so eliminate the #define.
Change-Id: I349dab5f9b6ec482a7c580b1396e03c8d30a250b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482278
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The resources allocated to a queue pair do not need to be directly
correlated to the queue size requested by the initiator in NVMe-oF, as
long as enough resources are present. The RDMA transport, for instance,
does complex pooling of the resources behind the scenes when using a
shared receive queue.
Simplify the resource allocation for a TCP qpair to just always allocate
the max allowed queue size right away. This is a configurable parameter,
so system administrators can adjust for their needs. The initiator may
then request a queue size less than or equal to that, which will only be
enforced by queue depth counting and not impact the actual number of
resources allocated on the target.
This change relies on the MaxC2HSize being equal to the Maximum Data
Transfer Size (MDTS) reported. That is the default configuration, but
MDTS is configurable. Changing the MDTS with this patch to a value
larger than 128k will cause the target to break. This is addressed in
the next patch in this series.
Change-Id: Ibd4723785c6a4d8d444f9b7bbfa89f98de2320f5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479733
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Add call for spdk_nvmf_bdev_ctrlr_compare_and_write_cmd
function in spdk_nvmf_ctrlr_process_io_cmd function
when fused command is discovered.
This patch also removes redundant defines for fused flags.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I61971a56577ab32b52e1fde1e572f718a9a2d9aa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476621
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch introduces new spdk_nvmf_bdev_ctrlr_compare_cmd
function which implements support for compare operation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadf402a6441a78ea0e6468f1066c6b0e10e63b9b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477782
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new bdev aux buf feature. Huge performance benefit for writes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5a27460a369ef5f13bf490a287603e566071be41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478384
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is prepared for the further call back usage.
Change-Id: Iccf304c87e67debfb4e7c330acc9cc233cc3ec48
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481917
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
