Use the env abstraction PCI functions to compare PCI addresses so that
details like whether or not domain is specified or whether 0-padding is
present don't affect the comparison.
For example, 0000:01:00.0 should compare equal to 01:00.0.
Change-Id: I9f3aaeb5f8fdbf3e246e31a41b4c09151288015e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Because ppc64 has less strict memory ordering behaviour
than x86 we need to introduce a memory barrier when
polling for completions due to possible reordering
of tracker and cpl access.
Change-Id: Id17116c38b2ba69154c175c539fc97c60897deb0
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Reviewed-on: https://review.gerrithub.io/383728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I482ad9e722f6fb775c1c91c8661212250a6914bc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386722
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some devices may report a RTD3E time that is shorter than their actual
shutdown time in practice; force the timeout to be at least 10 seconds
to allow for a reasonable amount of shutdown time.
This doesn't add any extra delay for devices that do complete the
shutdown process within their reported RTD3E time, since we will return
as soon as the device reports that it is finished shutting down.
Change-Id: I365e66ba6a938400be516df170bd3ff288810caf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386719
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
cmd and cpl rings must be aligned on page size boundaries.
Change-Id: I103eed32adfaa4388bc7d672ee166973f796b343
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Reviewed-on: https://review.gerrithub.io/383727
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a ctrlr is failed to initialize and to respond other
requests, the nvme_ctrlr_fail() will be always called. Add
a log there to have the traddr information so that applications
can know which ctrlr has the problem.
Change-Id: I951062a51349af81a505472f79e3c00a1ead2fbf
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386189
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3db00323c20786713750d13a61b1531d8b1ce7f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe 1.2 introduced a new Identify Controller field, RTD3E ("RTD3 Entry
Latency"), which allows the device to report the expected time for a
normal shutdown. Use this as the timeout for the shutdown process when
available instead of hard-coding 5 seconds.
Change-Id: I14e7223c81ba397771cf00b49f034f25d21b6e82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_pci_device_claim() can be used to ensure only one process
at a time uses any given PCI device. Previously this was only
used in the bdev_nvme driver - other apps like nvme/perf do
not use spdk_pci_device_claim() and could effectively rip out
the device from a running bdev-based app like the NVMe-oF target.
So instead of modifying all of the nvme apps, put this logic into
the core nvme driver instead so that all applications get the
benefit transparently. Save the fd when the controller is constructed
and then close it when the controller is destructed to handle the
detach (including hotplug) cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5dc48a2e41dc06707800f15a9e1f9141477628c6
Reviewed-on: https://review.gerrithub.io/385524
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For using SoftRoce, there will be packets loss,
so we need to use this value for re-transmission.
retry_count means the maximum number of times that
a data transfer operation should be retried on the
connection when an error occurs.
Change-Id: Ibd81a33d3838bbdf0c054f01666e7ec59bb0a38f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382079
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The newly added UT code will exercise the cases that opts_size is
smaller and equal to the current version of spdk_nvme_io_qpair_opts.
This is for the backward compatibilty when SPDK components are built
as the shared library later.
Change-Id: Ic906d765f5b638070e3d9c8e38827577c625b679
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new parameter for the default ctrlr opts initialization.
This is to make sure future compatibility when SPDK components
are built as a shared library. User's version and SPDK's version
may be in different size.
The change here is to make sure the backward compatibility when
new fields are added in the struct spdk_nvme_ctrlr_opts.
Change-Id: Icfc9640993cb06063b825d4df5835d920dd374e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380846
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A random host ID is generated per SPDK application startup if the user
doesn't specify a host ID during controller startup.
This also changes the default host NQN for NVMe-oF connections to a
random UUID NQN based on the host ID.
Change-Id: Ib0f70dd63e53087716842b412a1f134a9991d4da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was removed in NVMe 1.2.1 ECN 002.
Change-Id: Icacd53c1f33043cf1c9f30bff1fb9dce1efa69b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SGL with contiguous physical buffer metadata as the default PSDT
if NVMe can support SGL.
Change-Id: I99192a8b5408f1b034d5112d77d13639b7558f01
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/378699
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_ctrlr_cmd_io_raw_with_md() will be verified
on Cosmos+ OpenSSD as soon as it will support meta data.
Change-Id: Ib5f3f1f1eba66d0147a566804395bfa5ec959c2f
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/377428
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If user specify a trid, we should not attach other ctrlrs
Change-Id: I73a4278c1d7551908feb56d01a1c41c0d049bb91
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/377653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reason: In our default configuration, we use
nqn.2016-06.io.spdk:init
Change-Id: Ic840b41230f53d5d97166a38faf7c2109fa6b41a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/377463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users don't need to provide nvme debug flag for the error cases.
Change-Id: I00c29e2b8ab470b0233d94acec52b4bec129728c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/376708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow the user to set the source address when connecting to a NVMe-oF
controller.
Change-Id: Ice3add4b2cd3b64fdb8d0d7807d2235f90fd86b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id2d38779b2178ce56391ac75781c1e41e4a83e1d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/375130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Certain vendors do not report correct number of queues allocated in "Set Features/Number of Queues" completion CDW0 per spec.
As a work around, issue "Get Features/Number of Queues" and rely on the value provided there.
Change-Id: Ib9cc4dcf1bdb732413becc751883a7311c6f672f
Signed-off-by: Konstantin Vyshetsky <kon.vyshetsky@stellus.com>
Reviewed-on: https://review.gerrithub.io/375234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used in callbacks when a user has a namespace but needs to
call controller specific functions such as alloc_io_qpair.
Change-Id: I00c931e2846e42f540c17f3254fe97a45e9bd079
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/375022
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PAGE_SIZE is the host memory page size, which is irrelevant for the NVMe
driver; what we actually care about is the NVMe controller's memory page
size, CC.MPS.
This patch cleans up the uses of PAGE_SIZE in the NVMe driver; the
behavior is still the same in all cases today, since normal NVMe
controllers report a minimum page size of 4096.
Change-Id: I56fce2770862329a9ce25370722f44269234ed46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An optional field was added in NVMe 1.3 to indicate the optimal I/O
boundary that should not be crossed for best performance. This is
equivalent to the existing Intel-specific stripe size quirk.
Add support for the new NOIOB field and move the current quirk-based
code so it is updated in nvme_ns_identify_update().
Change-Id: Ifc4974f51dcd59e7f24565d8d5159b036458c6e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This also changes the SGL -> PRP case to translate each 4K page from
virtual to physical, in case the buffer is not physically contiguous.
Change-Id: If027f9d656c52c56504f0c64cd4464e16440df63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unmapped blocks on some older nvme devices will read zero even if the
device does not explicitly define the unmap behavior.
Change-Id: Ia825a406cbd01f89192c300cfe35013fb4aed715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372006
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ia45d356fbc2c4baea86a96eb28264f104f593a9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373156
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The value for lba_count is stored in a 0-based 16 bit register. here we
confirm that the value passed to that register is no larger than 2^16.
Change-Id: I234e55fc2b61338444dfe8f734e76f958d1f0443
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372370
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Rename _nvme_ns_cmd_split_sgl_request to
_nvme_ns_cmd_split_request_prp.
2) Add _nvme_ns_cmd_split_request_sgl. This
function will be used with controllers that
support SGL, to make sure the request does not
span more SGEs than the controller or supporting
software supports.
While here, add a useful error message for both
the prp and sgl cases, if the child_length is not
an even multiple of the lba size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd04aee3c571359009260fe46400ce1844511aa3
Reviewed-on: https://review.gerrithub.io/372359
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Requests may need to be split in which case a child
request may have a size smaller than the SGE that
contains the child request's payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c7ab76104d56fa9dde168cfdddb6320c7157f98
Reviewed-on: https://review.gerrithub.io/372347
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For ioq, target is supposed to respond with the same
cntlid as specified in the connect capsule, but the
Linux kernel target doesn't actually do that. It really
only needs to be set on the adminq connect, so just
do that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4eec605f856bdad2c8614d505241566a9fe292ab
Reviewed-on: https://review.gerrithub.io/372345
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The Linux kernel NVMe-oF target can easily be misconfigured to report
newline-terminated strings from the discovery service, since its
parameters are set by echoing into sysfs files, and echo adds a newline
by default.
Newline characters are not allowed as part of the TRADDR and TRSVCID
fields, since they are defined as ASCII strings in the NVMe specification
sense, which limits the acceptable characters to the 0x20-0x7E range.
However, we can add a workaround for misconfigured targets with trailing
newlines that shouldn't impact any valid configurations.
Change-Id: I5db183d5637128fa8d50c245f4bfa965cc3ce8e2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370593
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b6a22591d0a5f7435d9fd9dd8d6a1c854da3d89
Reviewed-on: https://review.gerrithub.io/371978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gai_strerror() is documented as thread-safe, so this should be safe to
use from a library.
Change-Id: Ia0ec0b5c387db8993dd1ba3a3029562f25cc210d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369642
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support both SPDK_NVME_FW_COMMIT_REPLACE_IMG and SPDK_NVME_FW_COMMIT_REPLACE_AND_ENABLE_IMG.
Return code will specify if conventional reset is required.
For now, return error if subsystem reset is required.
Change-Id: I41a05675a210dd0bbf170517b32ee9e05da9a797
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/367287
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5b77212335e2f10ce263dc59baad87236b98048a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/367305
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add adrfam to the NVMe bdev JSON config output.
Change-Id: I9472bda04947cffc0df9b02eba0035bac01b7d7b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nothing in the spec indicates that NQNs should be case insensitive, and
we have fixed this elsewhere (e.g. commit df70bc1559: "nvmf: use
case-sensitive comparison for NQNs").
Change-Id: I4a48d1c7f25ec5af9ce4d73f1bf2fa543236503a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367106
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6010465d573decd93ddf9881392b3d807cd52918
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PCIe transport IDs are a non-standard extension to the NVMe-oF transport
address, and they only use the transport type and address fields of the
structure. Add a special case so that the rest of the fields are
ignored for PCIe addresses. All other transport types are NVMe-oF
addresses and should compare all fields.
Change-Id: I45ed143ea1712d17c6de8082677deeefd395c8a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sync the spec header with the major changes for NVMe 1.3.
Some of the added fields may have been added in previous
versions of the spec.
Change-Id: Ia50a52f5192cf450bb5cc2d18fcc1f92ebce7f77
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I941a4cb5563cebb2e68b48d3a74b4b73af0e9657
Reviewed-on: https://review.gerrithub.io/365662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1e272c63a5d863c92f1aa8299a9d98dcb72d0b13
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365082
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
These commands should be treated as aborted by spec,
so correctly deliver abort notifications when a
qpair is deleted.
Change-Id: I8af47a3f42f5695ef8e1a70813662e69102720b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Preivously, we can only get part of the log page
entries due to the limitation of buffer. With this
patch, we can get all.
Change-Id: I81b8afc73c108dac65d1ff5fe8d03bda41fa29a1
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/363323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also provide an option in perf tool let users to
disable it.
Change-Id: If4952513d77cecaa4f9403fbea811d86916ee87c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/363311
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An ECN to the NVMe 1.3 specification has clarified that the NQN may
contain 223 bytes before the null terminator. Make all of our NQN
length checks consistently enforce this behavior.
Change-Id: Iebfd57d11abea64964c7a6ad9d886e40efa243c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unit tests will be added as part of a separate patch updating all UT for
nvme.c. Global used for timeout value so it can be easily overwritten
by the upcoming unit tests for this function.
Change-Id: I7fc15aab91601ac57c94cae266b212c0998d2495
Signed-off-by: paul luse <paul.e.luse@intel.com>
The VirtualBox emulated NVMe device will intermittently
hang on the first read/write command after an I/O
qpair has been allocated. The frequency of the hang
diminishes if a delay is added after allocating the I/O
qpair - until it disappears completely with a 100us delay.
So add a quirk to insert this delay.
Note - the 100us delay was tested by running
the hello_world example app 50000 times.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I237e31b1b8a1a1e28262851ae0a21cd7345f0f1a
Fixes a scan-build warning about using qpairs after they have been
freed.
Change-Id: I263eabd6b784acf540c66136965f7705ef110a78
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up the existing comment blocks misaligned in the first column.
Also add line numbers to the comment checks.
Change-Id: I9d28c365271df36e7013d74cbb02d0023ab4f581
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A 100us is so small that applying the quirk to the specific
SSDs that require the delay is more trouble than it is worth.
So remove the quirk and always wait 100us before re-enabling
the NVMe SSD during initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a8cc6e35d103fffdf135580301fc3e5b27e722
Also avoid an spdk_get_ticks() call in the default
case where a timeout_cb_fn is not defined.
On my Intel(R) Xeon(R) E5-2699 v3 system with an
Intel(R) P3700 SSD, these modifications reduce software
overhead per I/O by 3-5% (as measured by the SPDK
overhead tool).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5bb5a87747b15d9e27655fabcd2bc1a40b0b990e
Queue aborts that would exceed the abort command limit
in software as a convenience for the user.
Change-Id: I8c1f0380984cc6c0cdb453db961939a7f571b336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead, pass NULL when an ADMIN command times out.
We don't expose the admin queue to the user.
Change-Id: If0768d329a689f6f7c3734c9d419e680d7378ed1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For each command that times out, call the timeout
callback one time if the user registered one.
Change-Id: Iaad39a886468e89bef63fe292c5cad1dce97a57c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It has been discovered that some devices require
a very small delay before writing CC.EN to 1 after
CSTS.RDY goes to 0.
Change-Id: I73d31726d17ebf5bbec7ee528e2f98fcd05234dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This isn't the indentation pattern I would have chosen, but
it's a complicated negotiation between what I want and what
astyle will let me get away with.
Change-Id: I4909587823931842ac3f227134e1d05e7d80da74
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Any Intel device reporting device ID 0x0953 needs this quirk.
Change-Id: I690b01ecf05105df00ec8cf6f2da7f7c0a601aa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This prevents a deadlock if the user immediately
calls spdk_nvme_detach.
Change-Id: I79f28abe163cbbf184bea907692c44aa4e1c8893
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The message about the uevent socket is not a fatal error; it just means
that hotplug monitoring will not work.
Change-Id: I29f6a253e96a86420c0fde9e19135f9f1d229bb9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
remove the unnecessary rte_eal_pci_probe_one() in function
spdk_pci_device_detach(), this could cause error message when we
terminate the application, it will also not make sense try to probe one
device after we detach it, we could call spdk_pci_nvme_device_attach()
instead of spdk_pci_nvme_enumerate() when we have one given device address,
dpdk will try to scan the device and add it back to pci device list then.
Change-Id: I35f5bb412249bb20da57394f0531c10a49691906
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Register all spdk_malloc() memory regions as ibv_mr in a spdk_mem_map
so we can look up the RDMA key for the user's buffer and pass it in the SGL
directly, rather than copying through a pre-registered bounce buffer.
Change-Id: I7340bc2020b5256750c95dbd24ba67961404e5e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The extended LBA format flag should be initialized after namespace
capability flag.
Change-Id: Iad479b454bb4e31120c17d40ae23937a099c6f8f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
The send completions must be processed prior to the
recv completions. However, if the completion queues
are separate this leaves a small window where
a send+recv completion arrive between polling
the send_cq and the recv_cq, resulting in the code
seeing the recv completion prior to the send
completion.
By combining the completion queues, this eliminates
any potential gap. The send completion will always
be processed before the recv completion.
Change-Id: I06bfef6af48559d0b9e00524ebc10f1a102e7387
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The actual uses of intrinsics are already guarded by feature-specific
ifdefs in nvme_pcie_copy_command(), but the header itself should also
only be included when it will actually be needed.
Change-Id: Ife65d6432b8dfd9d9db80fe4e385ab76491874c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These allocations need to be from memory registered with the SPDK env
library to allow future work on automatic ibverbs memory registration.
Change-Id: I6ec6999ecd6d6bf6ba4ab159630f7d01f3d46154
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can be used for issuing an abort for the timed-out command.
Change-Id: I3c5727fdddc156cd7c8f99afbc3e6da8e73bba56
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the ibv_recv_wr initialization in
nvme_rdma_alloc_rsps. Thus we can save some
CPU times
Change-Id: Id449b2684290431f8b3ba97ec4058171d34038bf
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
