This is a failsafe for finding and reporting data buffers that span
multiple Memory Regions. These errors should never be triggered, but
finding and reporting them will help any debugging.
Change-Id: I3c61e3cc510f5a36039fc1815ff0de45fce794d5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436054 (master)
Reviewed-on: https://review.gerrithub.io/437016
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is necessary to confirm that a buffer that spans a 2_MB boundary is
still in a single MR.
Change-Id: If0d14e514ab2197a0d2e3af4f565f56d50591210
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435179 (master)
Reviewed-on: https://review.gerrithub.io/435689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The time required to wait increases with the amount of submitted
FLR resets. Now that DPDK takes less and less time to initialize,
this starts to become an issue. We can even see on our CI within
regular tests where a single application is start-stopped in
a short period of time. This is also a problem if a device is
detached via RPC and immediately attached afterwards.
The time required to wait seems to cap at 2 seconds, so instruct
our driver to wait exactly that.
Change-Id: I18b6fbdea9b0dca5d7e1756e9ead7d97119f2fa2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429415
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an NVMe-specific issue and I/OA or VirtIO devices don't
need it. Additionally, the delay is now asynchronous, meaning
that potentially multiple NVMe controllers can wait all at once.
The drawback of this change is that we're needlessly waiting
even when using uio_pci_generic. However, since the delay does
not block anymore, its impact is significantly minimized.
Change-Id: I5d16a7fd7cb66c785acb687f14690e95f6188b9e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This indicates an out-of-spec device, so just print an error
message but don't bother retrying the AER.
While here, add status code type (sct) check for the other
status code check when an AER fails - it is not enough to
compare just the status code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibd26549aa08d3eb4814c239b6b2c6fe95e069a54
Reviewed-on: https://review.gerrithub.io/429533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With Identify Namespace Identification Descriptors can be
executed asynchronously, most of functions in the controller
initialization now can be executed asynchronously now, for
host with multiple controllers this can save some time during
initialization.
Change-Id: I70e3c6c2c691134d2ae4c5969288cced1538c6cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/428585
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I189ad8889c74937bf43bcf2c3029416ddb94976d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/425705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
The initiator will now automatically retry sending
commands if the target is not ready.
Change-Id: I13354283f77d9ccba9645e83c77061cac1b07b0f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes this particular function consistent
with all of the other functions in this file, and
I feel it is slightly more readable.
Change-Id: I99ace5b9eb45b0f706ca85a64b155444f45c9815
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428730
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
While more verbose, this makes it much more obvious that
an array of SGL elements is being filled out.
Change-Id: I98b8e5d46af32c5d7dbb990e267fdfd594942081
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428729
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Also add some comments.
Change-Id: I97c3a44f97aa3dadc114005c10bec83ae75994cf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428728
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_mem_map_translate() dereference a uint64_t * to get a
8-bytes long integer, but nvme_rdma_build_sgl_request() just passes
a 4-bytes long integer as last parameter, this causes a
stack-buffer-overflow error.
Reported in 3ba5ea9087.1539172863/fedora-05/build.log
Change-Id: Id1cda22114fef466dbb930b502e3a68310331f0e
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/428693
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This prevents the SPDK build from requirng unnecessary dependencies when
not compiling certain features. Also, fixes github issue #434
Change-Id: I7d0520474f3656ae32670313f2290e6b741c5ca8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Normally, there will be only one separator in transport id,
for example, either ':' or '='. But the users may input
this: trtype=PCIe traddr=0000:81:00.0.
Thus, there will be two diffrent separator '=' and ':',
and our function doest not handle this case correctly.
And this patch can fix this issue, and also update the
test case.
Change-Id: Ic3f10dc1e37c66647fede37c5cf9523fc2652677
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/428307
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
When the NVMe SSD supports multiple namespaces, we
allocate the related data structures to hold the
namespace related information. Add a check of valid
namespace id before accessing the memory structure.
Change-Id: I3176099a80f718d9470ee172a040a2ccc353aae9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/427058
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds struct for "Chunk Notification Log".
New log page is used to report the state of chunk, lblk or pu.
Implementation is consistent with Open-Channel
specification (rev. 2.0)
Change-Id: I8aaf01c14d2f0faf8b8f8a6a773b6cb9bf97b38d
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/426233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I830aba773e1d247ec571ff31eaba970ced0fd7a0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425413
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function will now check for whether or not a memory region is
contiguous accross 2MB map entries and return the total length of that
contiguous buffer up to the size specified by the user.
Also includes unittests
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I2ce582427d451be5a317808d0825c770e12e9a69
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I90da6d4d31c669a3bf046f7721923dd743c5ef21
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The function now takes a pointer as it's last argument, and copies the
size of the memory region for which the translation is validinto that
pointer.
For now, that will always be 2MB. However that behavior can change in
the future.
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I8686c166ec956507f5ae55cf602341281482cb89
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
use multiple sges, extended to support 2 sges.
add incapsule data support for contig and sgl type commands.
Change-Id: I9eaea0b5df4f4056e7a7f413542d557adad5899d
Signed-off-by: Potnuri Bharat Teja <bharatppotnuri@gmail.com>
Reviewed-on: https://review.gerrithub.io/423356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I1e5be0e282b9e29f7bf7ca7d2720b9fd00539be0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ide0c81b1cc29d67cec0c10ab877360db3699141e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently in the function nvme_ctrlr_start() the initialization
process is executed as a whole, in the case there are many controllers
in one system, which means other controllers must call the function
one by one. While here, we add several states here, which can
help refactoring the initialization process.
Change-Id: I209cf964bbf6e151823a7ecdc6a3f6e6e69df297
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I51b312a086f18a5b5f63de27dd69e43a8cc7225d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idd365df7fb61eafb502f415adf70638bb91ded0e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Identify Namespace Data Structure will be updated when format/
attach/detach/AER Namespaces, so we don't need to update it
in function spdk_nvme_ns_get_data().
Change-Id: Ia33804722bb09eb9a4e3fa1de251da47208a09b9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib5e977b0bad15af7a2a71000c1fc4861b5b5b0af
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
QEMU emulated NVMe SSDs report themselves with an Intel vendor ID,
but don't support the Intel vendor-specific log pages. So add
a quirk to avoid confusing error messages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic41476801ede94d43acb9972217ea7420ca53679
Reviewed-on: https://review.gerrithub.io/423422
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_ns_get_sector_size returns the sector
size of the data only. This new function adds
in the metadata size, if any.
While here, modify the bdev/nvme driver to use this
function - this is needed for ongoing extended sector
size work through the bdev layer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8070a7f8d29b0b2ac2a2d65e0df5f4736488351
Reviewed-on: https://review.gerrithub.io/422445
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
