14c0f94c88
verify.state files are not very useful because we fail the tests at any first failure. If there was something wrong with IO verification then autotest.sh would fail. Fio files with metrics output (IOPS, BW, latency, etc) are also not very useful as per-patch tests are not focused on benchmarking. Fixes #2546 Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com> Change-Id: I33fbe2fb0749d840f08ffe0d606d206268140991 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13019 Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com> Reviewed-by: Karol Latecki <karol.latecki@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
139 lines
4.1 KiB
Bash
Executable File
139 lines
4.1 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
set -xe
|
|
|
|
testdir=$(readlink -f $(dirname $0))
|
|
rootdir=$(readlink -f $testdir/../../..)
|
|
source $rootdir/test/common/autotest_common.sh
|
|
source $rootdir/test/vhost/common.sh
|
|
source $rootdir/test/bdev/nbd_common.sh
|
|
|
|
rpc_py="$rootdir/scripts/rpc.py -s $(get_vhost_dir 0)/rpc.sock"
|
|
vm_no="0"
|
|
|
|
function err_clean() {
|
|
trap - ERR
|
|
print_backtrace
|
|
set +e
|
|
error "Error on $1 $2"
|
|
vm_kill_all
|
|
$rpc_py vhost_scsi_controller_remove_target naa.vhost_vm.$vm_no 0
|
|
$rpc_py vhost_delete_controller naa.vhost_vm.$vm_no
|
|
$rpc_py bdev_lvol_delete $lvb_u
|
|
$rpc_py bdev_lvol_delete_lvstore -u $lvs_u
|
|
vhost_kill 0
|
|
exit 1
|
|
}
|
|
|
|
function usage() {
|
|
[[ -n $2 ]] && (
|
|
echo "$2"
|
|
echo ""
|
|
)
|
|
echo "Usage: $(basename $1) vm_image=PATH [-h|--help]"
|
|
echo "-h, --help Print help and exit"
|
|
echo " --vm_image=PATH Path to VM image used in these tests"
|
|
}
|
|
|
|
while getopts 'h-:' optchar; do
|
|
case "$optchar" in
|
|
-)
|
|
case "$OPTARG" in
|
|
vm_image=*) os_image="${OPTARG#*=}" ;;
|
|
*) usage $0 echo "Invalid argument '$OPTARG'" && exit 1 ;;
|
|
esac
|
|
;;
|
|
h) usage $0 && exit 0 ;;
|
|
*) usage $0 "Invalid argument '$optchar'" && exit 1 ;;
|
|
esac
|
|
done
|
|
|
|
if [[ $EUID -ne 0 ]]; then
|
|
echo "INFO: Go away user come back as root"
|
|
exit 1
|
|
fi
|
|
|
|
if [[ -z $os_image ]]; then
|
|
echo "No path to os image is given"
|
|
exit 1
|
|
fi
|
|
|
|
vhosttestinit
|
|
|
|
trap 'err_clean "${FUNCNAME}" "${LINENO}"' ERR
|
|
timing_enter start_vhost
|
|
vhost_run -n 0
|
|
timing_exit start_vhost
|
|
|
|
timing_enter create_lvol
|
|
|
|
nvme_bdev=$($rpc_py bdev_get_bdevs -b Nvme0n1)
|
|
nvme_bdev_bs=$(jq ".[] .block_size" <<< "$nvme_bdev")
|
|
nvme_bdev_name=$(jq ".[] .name" <<< "$nvme_bdev")
|
|
if [[ $nvme_bdev_bs != 512 ]]; then
|
|
echo "ERROR: Your device $nvme_bdev_name block size is $nvme_bdev_bs, but should be 512 bytes."
|
|
false
|
|
fi
|
|
|
|
lvb_size=20000 # MB
|
|
lvs_u=$($rpc_py bdev_lvol_create_lvstore Nvme0n1 lvs0)
|
|
lvb_u=$($rpc_py bdev_lvol_create -u $lvs_u lvb0 "$lvb_size")
|
|
timing_exit create_lvol
|
|
|
|
timing_enter convert_vm_image
|
|
modprobe nbd
|
|
trap 'nbd_stop_disks $(get_vhost_dir 0)/rpc.sock /dev/nbd0; err_clean "${FUNCNAME}" "${LINENO}"' ERR
|
|
nbd_start_disks "$(get_vhost_dir 0)/rpc.sock" $lvb_u /dev/nbd0
|
|
qemu-img convert $os_image -O raw /dev/nbd0
|
|
sync
|
|
nbd_stop_disks $(get_vhost_dir 0)/rpc.sock /dev/nbd0
|
|
sleep 1
|
|
timing_exit convert_vm_image
|
|
|
|
trap 'err_clean "${FUNCNAME}" "${LINENO}"' ERR
|
|
timing_enter create_vhost_controller
|
|
$rpc_py vhost_create_scsi_controller naa.vhost_vm.$vm_no
|
|
$rpc_py vhost_scsi_controller_add_target naa.vhost_vm.$vm_no 0 $lvb_u
|
|
timing_exit create_vhost_controller
|
|
|
|
timing_enter setup_vm
|
|
vm_setup --disk-type=spdk_vhost_scsi --force=$vm_no --disks="vhost_vm" --spdk-boot="vhost_vm"
|
|
vm_run $vm_no
|
|
vm_wait_for_boot 300 $vm_no
|
|
timing_exit setup_vm
|
|
|
|
start_part_sector=0 drive_size=0
|
|
while IFS=":" read -r id start end _; do
|
|
start=${start%s} end=${end%s}
|
|
[[ -b $id ]] && drive_size=$start
|
|
[[ $id =~ ^[0-9]+$ ]] && start_part_sector=$((end + 1))
|
|
done < <(vm_exec "$vm_no" "parted /dev/sda -ms unit s print")
|
|
|
|
# If we didn't get a start sector for the partition then probably something is amiss. Also,
|
|
# check if size of the drive matches size used for creating lvb and if not, fail.
|
|
((start_part_sector > 0)) && (((drive_size * 512) >> 20 == lvb_size))
|
|
|
|
timing_enter run_vm_cmd
|
|
vm_exec $vm_no "parted -s /dev/sda mkpart primary ${start_part_sector}s 100%; sleep 1; partprobe"
|
|
vm_exec $vm_no "mkfs.ext4 -F /dev/sda2; mkdir -p /mnt/sda2test; mount /dev/sda2 /mnt/sda2test;"
|
|
vm_exec $vm_no "fio --name=integrity --bsrange=4k-512k --iodepth=128 --numjobs=1 --direct=1 \
|
|
--thread=1 --group_reporting=1 --rw=randrw --rwmixread=70 --filename=/mnt/sda2test/test_file \
|
|
--verify=md5 --do_verify=1 --verify_backlog=1024 --fsync_on_close=1 --runtime=20 \
|
|
--time_based=1 --size=1024m --verify_state_save=0"
|
|
vm_exec $vm_no "umount /mnt/sda2test; rm -rf /mnt/sda2test"
|
|
alignment_offset=$(vm_exec $vm_no "cat /sys/block/sda/sda1/alignment_offset")
|
|
echo "alignment_offset: $alignment_offset"
|
|
timing_exit run_vm_cmd
|
|
|
|
vm_shutdown_all
|
|
|
|
timing_enter clean_vhost
|
|
$rpc_py vhost_scsi_controller_remove_target naa.vhost_vm.$vm_no 0
|
|
$rpc_py vhost_delete_controller naa.vhost_vm.$vm_no
|
|
$rpc_py bdev_lvol_delete $lvb_u
|
|
$rpc_py bdev_lvol_delete_lvstore -u $lvs_u
|
|
timing_exit clean_vhost
|
|
|
|
vhost_kill 0
|
|
|
|
vhosttestfini
|