35828d55ee
Set the GPIO pin to HIGH during trap command. This is to avoid errors in other test suites, when hardware hotplug test returns with an error. Change-Id: I953d42b8f87196a072c3b4530a38b9bf59c62316 Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12155 Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
94 lines
1.8 KiB
Bash
Executable File
94 lines
1.8 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
|
|
testdir=$(readlink -f $(dirname $0))
|
|
rootdir=$(readlink -f $testdir/../..)
|
|
source $rootdir/test/common/autotest_common.sh
|
|
|
|
function insert_device() {
|
|
ssh root@$ip 'Beetle --SetGpio "$gpio" HIGH'
|
|
waitforblk $name
|
|
DRIVER_OVERRIDE=$driver $rootdir/scripts/setup.sh
|
|
}
|
|
|
|
function remove_device() {
|
|
ssh root@$ip 'Beetle --SetGpio "$gpio" LOW'
|
|
}
|
|
|
|
function restore_device() {
|
|
ssh root@$ip 'Beetle --SetGpio "$gpio" HIGH'
|
|
}
|
|
|
|
ip=$1
|
|
gpio=$2
|
|
driver=$3
|
|
declare -i io_time=5
|
|
declare -i kernel_hotplug_time=7
|
|
|
|
timing_enter hotplug_hw_cfg
|
|
|
|
# Configure microcontroller
|
|
ssh root@$ip 'Beetle --SetGpioDirection "$gpio" OUT'
|
|
|
|
# Get blk dev name connected to interposer
|
|
ssh root@$ip 'Beetle --SetGpio "$gpio" HIGH'
|
|
sleep $kernel_hotplug_time
|
|
$rootdir/scripts/setup.sh reset
|
|
blk_list1=$(lsblk -d --output NAME | grep "^nvme")
|
|
remove_device
|
|
sleep $kernel_hotplug_time
|
|
blk_list2=$(lsblk -d --output NAME | grep "^nvme") || true
|
|
name=${blk_list1#"$blk_list2"}
|
|
|
|
insert_device
|
|
|
|
timing_exit hotplug_hw_cfg
|
|
|
|
timing_enter hotplug_hw_test
|
|
|
|
mode=""
|
|
if [ "$driver" = "uio_pci_generic" ]; then
|
|
mode="-m pa"
|
|
fi
|
|
|
|
exec {log}> >(tee -a "$testdir/log.txt")
|
|
exec >&$log 2>&1
|
|
|
|
$SPDK_EXAMPLE_DIR/hotplug -i 0 -t 100 -n 2 -r 2 $mode &
|
|
hotplug_pid=$!
|
|
|
|
trap 'killprocess $hotplug_pid; restore_device; exit 1' SIGINT SIGTERM EXIT
|
|
|
|
i=0
|
|
while ! grep "Starting I/O" $testdir/log.txt; do
|
|
[ $i -lt 20 ] || break
|
|
i=$((i + 1))
|
|
sleep 1
|
|
done
|
|
|
|
if ! grep "Starting I/O" $testdir/log.txt; then
|
|
return 1
|
|
fi
|
|
|
|
# Add and remove NVMe with delays between to give some time for IO to proceed
|
|
remove_device
|
|
sleep $io_time
|
|
insert_device
|
|
sleep $io_time
|
|
remove_device
|
|
sleep $io_time
|
|
insert_device
|
|
sleep $io_time
|
|
|
|
timing_enter wait_for_example
|
|
|
|
if ! wait $hotplug_pid; then
|
|
echo "Hotplug example returned error!"
|
|
return 1
|
|
fi
|
|
|
|
timing_exit wait_for_example
|
|
|
|
trap - SIGINT SIGTERM EXIT
|
|
|
|
timing_exit hotplug_hw_test
|