Go to file
Darek Stojaczyk 7fa9063148 test/lvol: start rewriting python tests to bash
There are multiple things wrong with current python tests:
 * they don't stop the execution on error
 * the output makes it difficult to understand what really
   happened inside the test
 * there is no easy way to reproduce a failure if there
   is one (besides running the same test script again)
 * they currently suffer from intermittent failures and
   there's no-one there to fix them
 * they stand out from the rest of spdk tests, which are
   written in bash

So we rewrite those tests to bash. They will use rpc.py
daemon to send RPC commands, so they won't take any more
time to run than python tests.

The tests are going to be split them into a few different
categories:
 * clones
 * snapshots
 * thin provisioning
 * tasting
 * renaming
 * resizing
 * all the dumb ones - construct, destruct, etc

Each file is a standalone test script, with common utility
functions located in test/lvol/common.sh. Each file tests
a single, specific feature, but under multiple conditions.
Each test case is implemented as a separate function, so
if you touch only one lvol feature, you can run only one
test script, and if e.g. only a later test case notoriously
breaks, you can comment out all the previous test case
invocations (up to ~10 lines) and focus only on that
failing one.

The new tests don't correspond 1:1 to the old python ones
- they now cover more. Whenever there was a negative test
to check if creating lvs on inexistent bdev failed, we'll
now also create a dummy bdev beforehand, so that lvs will
have more opportunity to do something it should not.
Some other test cases were squashed. A few negative tests
required a lot of setup just to try doing something
illegal and see if spdk crashed. We'll now do those illegal
operations in a single test case, giving lvol lib more
opportunity to break. Even if illegal operation did not
cause any segfault, is the lvolstore/lvol still usable?
E.g. if we try to create an lvol on an lvs that doesn't
have enough free clusters and it fails as expected, will
it be still possible to create a valid lvol afterwards?

Besides sending various RPC commands and checking their
return code, we'll also parse and compare various fields
in JSON RPC output from get_lvol_stores or get_bdevs RPC.
We'll use inline jq calls for that. Whenever something's
off, it will be clear which RPC returned invalid values
and what were the expected values even without having
detailed error prints.

The tests are designed to be as easy as possible to debug
whenever something goes wrong.

This patch removes one test case from python tests and
adds a corresponding test into the new test/lvol/lvol2.sh
file. The script will be renamed to just lvol.sh after
the existing lvol.sh (which starts all python tests) is
finally removed.

As for the bash script itself - each test case is run
through a run_test() function which verifies there were
no lvolstores, lvols, or bdevs left after the test case
has finished. Inside the particular tests we will still
check if the lvolstore removal at the end was successful,
but that's because we want to make sure it's gone e.g even
before we remove the underlying lvs' base bdev.

Change-Id: Iaa2bb656233e1c9f0c35093f190ac26c39e78623
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459517
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
2019-12-06 14:58:44 +00:00
.githooks githooks: limit the number of threads for pre-push hook 2019-08-07 12:30:38 +00:00
app env: add spdk_pci_device_get_type 2019-10-24 17:04:04 +00:00
build/lib build: consolidate library outputs in build/lib 2016-11-17 13:15:09 -07:00
doc lib/iscsi: Remove the code for the deprecated CPU mask 2019-12-06 14:50:43 +00:00
dpdk@b5c9624957 dpdk: update submodule to include vhost compile fix 2019-10-31 04:54:10 +00:00
dpdkbuild Enable DPDK shared object build with SPDK shared object build. 2019-08-07 12:28:48 +00:00
etc/spdk nvmf/fc: Add listen address support in FC transport 2019-10-17 16:29:04 +00:00
examples Change fio version 2019-12-06 14:50:59 +00:00
go go: empty Go package 2018-06-28 18:15:51 +00:00
include bdev: add bdev channel a link 2019-12-06 14:47:56 +00:00
intel-ipsec-mb@489ec6082a ipsec: move to version 0.52 2019-04-24 22:49:11 +00:00
ipsecbuild Makefile: Add possibility to uninstall spdk. 2019-05-16 20:56:18 +00:00
isa-l@f3993f5c0b spdk: Upgrade isa-l to add support for aarch64 2019-11-04 12:26:00 +00:00
isalbuild Makefile: Add possibility to uninstall spdk. 2019-05-16 20:56:18 +00:00
lib lib/vmd: check requested size before padding VMD's base address 2019-12-06 14:57:01 +00:00
mk bdev/zone: Register/unregister zoned bdev 2019-11-15 20:27:14 +00:00
module module/crypto: enhance recent session optimization 2019-12-06 14:49:40 +00:00
ocf@6fb1a697a4 lib/bdev/ocf: update of ocf library to version 19.06 2019-10-22 17:22:41 +00:00
pkg version: 19.10 pre 2019-07-31 08:25:59 +00:00
scripts bdev/ocssd: create / delete calls 2019-12-06 14:45:05 +00:00
shared_lib Revert "shared_lib: add as_needed to the libspdk.so linker script" 2019-07-18 04:12:05 +00:00
test test/lvol: start rewriting python tests to bash 2019-12-06 14:58:44 +00:00
.astylerc astyle: change "add-braces" to "j" for compatibility 2017-12-13 21:23:27 -05:00
.gitignore makefile: Add cc.flags.mk to .gitignore list 2019-05-15 18:44:59 +00:00
.gitmodules ocf: add ocf submodule 2019-02-27 17:26:51 +00:00
autobuild.sh test: Shellcheck - correct rule: Use find... 2019-11-27 07:08:57 +00:00
autopackage.sh test: fix SC2103 errors on older shellcheck. 2019-11-18 13:06:49 +00:00
autorun_post.py Check file permissions in the check_format script 2018-10-04 23:08:12 +00:00
autorun.sh test: Run autotest.sh with sudo -E 2019-07-03 04:15:18 +00:00
autotest.sh test/lvol: start rewriting python tests to bash 2019-12-06 14:58:44 +00:00
CHANGELOG.md pipe: Add a utility for buffering data from sockets 2019-11-20 09:35:32 +00:00
CONFIG lib/nvme: add NVMe character device 2019-10-24 23:43:59 +00:00
configure spdk: enable isa-l by default aarch64 2019-11-18 13:14:41 +00:00
CONTRIBUTING.md Add CONTRIBUTING.md 2017-09-05 13:25:45 -04:00
ISSUE_TEMPLATE.md github: Add issue tracker template 2018-04-19 13:50:08 -04:00
LICENSE Remove year from copyright headers. 2016-01-28 08:54:18 -07:00
Makefile mk: move the bdev modules under module directory. 2019-08-22 16:29:49 +00:00
README.md doc: update doc with instructions for building shared lib 2018-10-26 20:41:24 +00:00

Storage Performance Development Kit

Build Status

The Storage Performance Development Kit (SPDK) provides a set of tools and libraries for writing high performance, scalable, user-mode storage applications. It achieves high performance by moving all of the necessary drivers into userspace and operating in a polled mode instead of relying on interrupts, which avoids kernel context switches and eliminates interrupt handling overhead.

The development kit currently includes:

In this readme:

Documentation

Doxygen API documentation is available, as well as a Porting Guide for porting SPDK to different frameworks and operating systems.

Source Code

git clone https://github.com/spdk/spdk
cd spdk
git submodule update --init

Prerequisites

The dependencies can be installed automatically by scripts/pkgdep.sh.

./scripts/pkgdep.sh

Build

Linux:

./configure
make

FreeBSD: Note: Make sure you have the matching kernel source in /usr/src/ and also note that CONFIG_COVERAGE option is not available right now for FreeBSD builds.

./configure
gmake

Unit Tests

./test/unit/unittest.sh

You will see several error messages when running the unit tests, but they are part of the test suite. The final message at the end of the script indicates success or failure.

Vagrant

A Vagrant setup is also provided to create a Linux VM with a virtual NVMe controller to get up and running quickly. Currently this has only been tested on MacOS and Ubuntu 16.04.2 LTS with the VirtualBox provider. The VirtualBox Extension Pack must also be installed in order to get the required NVMe support.

Details on the Vagrant setup can be found in the SPDK Vagrant documentation.

Advanced Build Options

Optional components and other build-time configuration are controlled by settings in the Makefile configuration file in the root of the repository. CONFIG contains the base settings for the configure script. This script generates a new file, mk/config.mk, that contains final build settings. For advanced configuration, there are a number of additional options to configure that may be used, or mk/config.mk can simply be created and edited by hand. A description of all possible options is located in CONFIG.

Boolean (on/off) options are configured with a 'y' (yes) or 'n' (no). For example, this line of CONFIG controls whether the optional RDMA (libibverbs) support is enabled:

CONFIG_RDMA?=n

To enable RDMA, this line may be added to mk/config.mk with a 'y' instead of 'n'. For the majority of options this can be done using the configure script. For example:

./configure --with-rdma

Additionally, CONFIG options may also be overridden on the make command line:

make CONFIG_RDMA=y

Users may wish to use a version of DPDK different from the submodule included in the SPDK repository. Note, this includes the ability to build not only from DPDK sources, but also just with the includes and libraries installed via the dpdk and dpdk-devel packages. To specify an alternate DPDK installation, run configure with the --with-dpdk option. For example:

Linux:

./configure --with-dpdk=/path/to/dpdk/x86_64-native-linuxapp-gcc
make

FreeBSD:

./configure --with-dpdk=/path/to/dpdk/x86_64-native-bsdapp-clang
gmake

The options specified on the make command line take precedence over the values in mk/config.mk. This can be useful if you, for example, generate a mk/config.mk using the configure script and then have one or two options (i.e. debug builds) that you wish to turn on and off frequently.

Shared libraries

By default, the build of the SPDK yields static libraries against which the SPDK applications and examples are linked. Configure option --with-shared provides the ability to produce SPDK shared libraries, in addition to the default static ones. Use of this flag also results in the SPDK executables linked to the shared versions of libraries. SPDK shared libraries by default, are located in ./build/lib. This includes the single SPDK shared lib encompassing all of the SPDK static libs (libspdk.so) as well as individual SPDK shared libs corresponding to each of the SPDK static ones.

In order to start a SPDK app linked with SPDK shared libraries, make sure to do the following steps:

  • run ldconfig specifying the directory containing SPDK shared libraries
  • provide proper LD_LIBRARY_PATH

Linux:

./configure --with-shared
make
ldconfig -v -n ./build/lib
LD_LIBRARY_PATH=./build/lib/ ./app/spdk_tgt/spdk_tgt

Hugepages and Device Binding

Before running an SPDK application, some hugepages must be allocated and any NVMe and I/OAT devices must be unbound from the native kernel drivers. SPDK includes a script to automate this process on both Linux and FreeBSD. This script should be run as root.

sudo scripts/setup.sh

Users may wish to configure a specific memory size. Below is an example of configuring 8192MB memory.

sudo HUGEMEM=8192 scripts/setup.sh

Example Code

Example code is located in the examples directory. The examples are compiled automatically as part of the build process. Simply call any of the examples with no arguments to see the help output. You'll likely need to run the examples as a privileged user (root) unless you've done additional configuration to grant your user permission to allocate huge pages and map devices through vfio.

Contributing

For additional details on how to get more involved in the community, including contributing code and participating in discussions and other activities, please refer to spdk.io