Spdk/test/lib/iscsi/pdu/pdu.c
Changpeng Liu 144065f30c iscsi: fix big READ task release process for ERL1
When we enabled the ERL1 configuation, for the DATAIN task release
process, we will queue the task to the SNACK list firstly, and then
remove the list when got ACK from initiator, but for this part of
logic, the reference count of primary task was not released correctly.

Change-Id: Ic5959cf644c74f676be0b84c5650292dc426b2d8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
2016-12-06 13:00:32 -07:00

196 lines
5.1 KiB
C

/*-
* BSD LICENSE
*
* Copyright (c) Intel Corporation.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <spdk/endian.h>
#include "spdk/scsi.h"
#include "CUnit/Basic.h"
#include "../common.c"
#include "iscsi/acceptor.h"
#include "iscsi/portal_grp.h"
struct spdk_iscsi_tgt_node *
spdk_iscsi_find_tgt_node(const char *target_name)
{
return NULL;
}
int
spdk_iscsi_tgt_node_access(struct spdk_iscsi_conn *conn,
struct spdk_iscsi_tgt_node *target,
const char *iqn, const char *addr)
{
return 0;
}
int
spdk_iscsi_send_tgts(struct spdk_iscsi_conn *conn, const char *iiqn,
const char *iaddr,
const char *tiqn, uint8_t *data, int alloc_len, int data_len)
{
return 0;
}
void
spdk_iscsi_acceptor_stop(void)
{
}
int
spdk_iscsi_portal_grp_close_all(void)
{
return 0;
}
void
spdk_iscsi_conn_free_pdu(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
{
}
static void
maxburstlength_test(void)
{
struct spdk_iscsi_sess sess;
struct spdk_iscsi_conn conn;
struct spdk_scsi_dev dev;
struct spdk_scsi_lun lun;
struct spdk_iscsi_pdu *req_pdu;
struct spdk_iscsi_pdu *data_out_pdu;
struct iscsi_bhs_scsi_req *req;
struct iscsi_bhs_r2t *r2t;
struct iscsi_bhs_data_out *data_out;
struct spdk_iscsi_pdu *response_pdu;
int rc;
memset(&sess, 0, sizeof(sess));
memset(&conn, 0, sizeof(conn));
memset(&dev, 0, sizeof(dev));
memset(&lun, 0, sizeof(lun));
req_pdu = spdk_get_pdu();
data_out_pdu = spdk_get_pdu();
sess.ExpCmdSN = 0;
sess.MaxCmdSN = 64;
sess.session_type = SESSION_TYPE_NORMAL;
sess.MaxBurstLength = 1024;
lun.id = 0;
dev.maxlun = 1;
dev.lun[0] = &lun;
conn.full_feature = 1;
conn.sess = &sess;
conn.dev = &dev;
conn.state = ISCSI_CONN_STATE_RUNNING;
TAILQ_INIT(&conn.write_pdu_list);
TAILQ_INIT(&conn.active_r2t_tasks);
req_pdu->bhs.opcode = ISCSI_OP_SCSI;
req_pdu->data_segment_len = 0;
req = (struct iscsi_bhs_scsi_req *)&req_pdu->bhs;
to_be32(&req->cmd_sn, 0);
to_be32(&req->expected_data_xfer_len, 1028);
to_be32(&req->itt, 0x1234);
req->write = 1;
req->final = 1;
g_spdk_iscsi.MaxRecvDataSegmentLength = 1024;
rc = spdk_iscsi_execute(&conn, req_pdu);
CU_ASSERT_FATAL(rc == 0);
response_pdu = TAILQ_FIRST(&conn.write_pdu_list);
CU_ASSERT(response_pdu != NULL);
/*
* Confirm that a correct R2T reply was sent in reponse to the
* SCSI request.
*/
TAILQ_REMOVE(&conn.write_pdu_list, response_pdu, tailq);
CU_ASSERT(response_pdu->bhs.opcode == ISCSI_OP_R2T);
r2t = (struct iscsi_bhs_r2t *)&response_pdu->bhs;
CU_ASSERT(from_be32(&r2t->desired_xfer_len) == 1024);
CU_ASSERT(from_be32(&r2t->buffer_offset) == 0);
CU_ASSERT(from_be32(&r2t->itt) == 0x1234);
data_out_pdu->bhs.opcode = ISCSI_OP_SCSI_DATAOUT;
data_out_pdu->bhs.flags = ISCSI_FLAG_FINAL;
data_out_pdu->data_segment_len = 1028;
data_out = (struct iscsi_bhs_data_out *)&data_out_pdu->bhs;
data_out->itt = r2t->itt;
data_out->ttt = r2t->ttt;
DSET24(data_out->data_segment_len, 1028);
rc = spdk_iscsi_execute(&conn, data_out_pdu);
CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
}
int
main(int argc, char **argv)
{
CU_pSuite suite = NULL;
unsigned int num_failures;
if (CU_initialize_registry() != CUE_SUCCESS) {
return CU_get_error();
}
suite = CU_add_suite("iscsi_suite", NULL, NULL);
if (suite == NULL) {
CU_cleanup_registry();
return CU_get_error();
}
if (
CU_add_test(suite, "maxburstlength test", maxburstlength_test) == NULL
) {
CU_cleanup_registry();
return CU_get_error();
}
CU_basic_set_mode(CU_BRM_VERBOSE);
CU_basic_run_tests();
num_failures = CU_get_number_of_failures();
CU_cleanup_registry();
return num_failures;
}