ivampiresp/Spdk
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
40a465bae4
Spdk/test/unit/unittest.sh
Tomasz Zawadzki cb7a83f059 unittest.sh: verify additional dependencies by configure flags 
There were multiple ways to check if particular UT should be executed.
This script unifies those.

To allow executing unittest.sh as standalone script,
verifying config.h flags was chosen.

FTL is an exception, as it always compiles if built on Linux.
Same condition was kept to execute the UT.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I83b3a58d4574154166af6763e7d1c38d75b8475d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2019
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2020-05-08 11:30:27 +00:00

250 lines
9.4 KiB
Bash
Executable File
Raw Blame History

#!/usr/bin/env bash
#
# Environment variables:
# $valgrind Specify the valgrind command line, if not
# then a default command line is used
set -xe
testdir=$(readlink -f $(dirname $0))
rootdir=$(readlink -f $(dirname $0)/../..)
source "$rootdir/test/common/autotest_common.sh"
cd "$rootdir"
function unittest_bdev() {
$valgrind $testdir/lib/bdev/bdev.c/bdev_ut
$valgrind $testdir/lib/bdev/bdev_ocssd.c/bdev_ocssd_ut
$valgrind $testdir/lib/bdev/raid/bdev_raid.c/bdev_raid_ut
$valgrind $testdir/lib/bdev/bdev_zone.c/bdev_zone_ut
$valgrind $testdir/lib/bdev/gpt/gpt.c/gpt_ut
$valgrind $testdir/lib/bdev/part.c/part_ut
$valgrind $testdir/lib/bdev/scsi_nvme.c/scsi_nvme_ut
$valgrind $testdir/lib/bdev/vbdev_lvol.c/vbdev_lvol_ut
$valgrind $testdir/lib/bdev/vbdev_zone_block.c/vbdev_zone_block_ut
$valgrind $testdir/lib/bdev/mt/bdev.c/bdev_ut
}
function unittest_blob() {
$valgrind $testdir/lib/blob/blob.c/blob_ut
$valgrind $testdir/lib/blobfs/tree.c/tree_ut
$valgrind $testdir/lib/blobfs/blobfs_async_ut/blobfs_async_ut
# blobfs_sync_ut hangs when run under valgrind, so don't use $valgrind
$testdir/lib/blobfs/blobfs_sync_ut/blobfs_sync_ut
$valgrind $testdir/lib/blobfs/blobfs_bdev.c/blobfs_bdev_ut
}
function unittest_event() {
$valgrind $testdir/lib/event/subsystem.c/subsystem_ut
$valgrind $testdir/lib/event/app.c/app_ut
$valgrind $testdir/lib/event/reactor.c/reactor_ut
}
function unittest_ftl() {
$valgrind $testdir/lib/ftl/ftl_ppa/ftl_ppa_ut
$valgrind $testdir/lib/ftl/ftl_band.c/ftl_band_ut
$valgrind $testdir/lib/ftl/ftl_reloc.c/ftl_reloc_ut
$valgrind $testdir/lib/ftl/ftl_wptr/ftl_wptr_ut
$valgrind $testdir/lib/ftl/ftl_md/ftl_md_ut
$valgrind $testdir/lib/ftl/ftl_io.c/ftl_io_ut
}
function unittest_iscsi() {
$valgrind $testdir/lib/iscsi/conn.c/conn_ut
$valgrind $testdir/lib/iscsi/param.c/param_ut
$valgrind $testdir/lib/iscsi/tgt_node.c/tgt_node_ut $testdir/lib/iscsi/tgt_node.c/tgt_node.conf
$valgrind $testdir/lib/iscsi/iscsi.c/iscsi_ut
$valgrind $testdir/lib/iscsi/init_grp.c/init_grp_ut $testdir/lib/iscsi/init_grp.c/init_grp.conf
$valgrind $testdir/lib/iscsi/portal_grp.c/portal_grp_ut $testdir/lib/iscsi/portal_grp.c/portal_grp.conf
}
function unittest_json() {
$valgrind $testdir/lib/json/json_parse.c/json_parse_ut
$valgrind $testdir/lib/json/json_util.c/json_util_ut
$valgrind $testdir/lib/json/json_write.c/json_write_ut
$valgrind $testdir/lib/jsonrpc/jsonrpc_server.c/jsonrpc_server_ut
}
function unittest_nvme() {
$valgrind $testdir/lib/nvme/nvme.c/nvme_ut
$valgrind $testdir/lib/nvme/nvme_ctrlr.c/nvme_ctrlr_ut
$valgrind $testdir/lib/nvme/nvme_ctrlr_cmd.c/nvme_ctrlr_cmd_ut
$valgrind $testdir/lib/nvme/nvme_ctrlr_ocssd_cmd.c/nvme_ctrlr_ocssd_cmd_ut
$valgrind $testdir/lib/nvme/nvme_ns.c/nvme_ns_ut
$valgrind $testdir/lib/nvme/nvme_ns_cmd.c/nvme_ns_cmd_ut
$valgrind $testdir/lib/nvme/nvme_ns_ocssd_cmd.c/nvme_ns_ocssd_cmd_ut
$valgrind $testdir/lib/nvme/nvme_qpair.c/nvme_qpair_ut
$valgrind $testdir/lib/nvme/nvme_pcie.c/nvme_pcie_ut
$valgrind $testdir/lib/nvme/nvme_poll_group.c/nvme_poll_group_ut
$valgrind $testdir/lib/nvme/nvme_quirks.c/nvme_quirks_ut
$valgrind $testdir/lib/nvme/nvme_tcp.c/nvme_tcp_ut
$valgrind $testdir/lib/nvme/nvme_uevent.c/nvme_uevent_ut
}
function unittest_nvmf() {
$valgrind $testdir/lib/nvmf/ctrlr.c/ctrlr_ut
$valgrind $testdir/lib/nvmf/ctrlr_bdev.c/ctrlr_bdev_ut
$valgrind $testdir/lib/nvmf/ctrlr_discovery.c/ctrlr_discovery_ut
$valgrind $testdir/lib/nvmf/subsystem.c/subsystem_ut
$valgrind $testdir/lib/nvmf/tcp.c/tcp_ut
}
function unittest_scsi() {
$valgrind $testdir/lib/scsi/dev.c/dev_ut
$valgrind $testdir/lib/scsi/lun.c/lun_ut
$valgrind $testdir/lib/scsi/scsi.c/scsi_ut
$valgrind $testdir/lib/scsi/scsi_bdev.c/scsi_bdev_ut
$valgrind $testdir/lib/scsi/scsi_pr.c/scsi_pr_ut
}
function unittest_sock() {
$valgrind $testdir/lib/sock/sock.c/sock_ut
$valgrind $testdir/lib/sock/posix.c/posix_ut
}
function unittest_util() {
$valgrind $testdir/lib/util/base64.c/base64_ut
$valgrind $testdir/lib/util/bit_array.c/bit_array_ut
$valgrind $testdir/lib/util/cpuset.c/cpuset_ut
$valgrind $testdir/lib/util/crc16.c/crc16_ut
$valgrind $testdir/lib/util/crc32_ieee.c/crc32_ieee_ut
$valgrind $testdir/lib/util/crc32c.c/crc32c_ut
$valgrind $testdir/lib/util/string.c/string_ut
$valgrind $testdir/lib/util/dif.c/dif_ut
$valgrind $testdir/lib/util/iov.c/iov_ut
$valgrind $testdir/lib/util/math.c/math_ut
$valgrind $testdir/lib/util/pipe.c/pipe_ut
}
# if ASAN is enabled, use it. If not use valgrind if installed but allow
# the env variable to override the default shown below.
if [ -z ${valgrind+x} ]; then
if grep -q '#undef SPDK_CONFIG_ASAN' $rootdir/include/spdk/config.h && hash valgrind; then
valgrind='valgrind --leak-check=full --error-exitcode=2'
else
valgrind=''
fi
fi
# setup local unit test coverage if cov is available
if hash lcov && grep -q '#define SPDK_CONFIG_COVERAGE 1' $rootdir/include/spdk/config.h; then
cov_avail="yes"
else
cov_avail="no"
fi
if [ "$cov_avail" = "yes" ]; then
# set unit test output dir if not specified in env var
if [ -z ${UT_COVERAGE+x} ]; then
UT_COVERAGE="ut_coverage"
fi
mkdir -p $UT_COVERAGE
export LCOV_OPTS="
--rc lcov_branch_coverage=1
--rc lcov_function_coverage=1
--rc genhtml_branch_coverage=1
--rc genhtml_function_coverage=1
--rc genhtml_legend=1
--rc geninfo_all_blocks=1
"
export LCOV="lcov $LCOV_OPTS --no-external"
# zero out coverage data
$LCOV -q -c -i -d . -t "Baseline" -o $UT_COVERAGE/ut_cov_base.info
fi
# workaround for valgrind v3.13 on arm64
if [ $(uname -m) = "aarch64" ]; then
export LD_HWCAP_MASK=1
fi
run_test "unittest_include" $valgrind $testdir/include/spdk/histogram_data.h/histogram_ut
run_test "unittest_bdev" unittest_bdev
if grep -q '#define SPDK_CONFIG_CRYPTO 1' $rootdir/include/spdk/config.h; then
run_test "unittest_bdev_crypto" $valgrind $testdir/lib/bdev/crypto.c/crypto_ut
fi
if grep -q '#define SPDK_CONFIG_REDUCE 1' $rootdir/include/spdk/config.h; then
run_test "unittest_bdev_reduce" $valgrind $testdir/lib/bdev/compress.c/compress_ut
fi
if grep -q '#define SPDK_CONFIG_PMDK 1' $rootdir/include/spdk/config.h; then
run_test "unittest_bdev_pmem" $valgrind $testdir/lib/bdev/pmem/bdev_pmem_ut
fi
if grep -q '#define SPDK_CONFIG_RAID5 1' $rootdir/include/spdk/config.h; then
run_test "unittest_bdev_raid5" $valgrind $testdir/lib/bdev/raid/raid5.c/raid5_ut
fi
run_test "unittest_blob_blobfs" unittest_blob
run_test "unittest_event" unittest_event
if [ $(uname -s) = Linux ]; then
run_test "unittest_ftl" unittest_ftl
fi
run_test "unittest_ioat" $valgrind $testdir/lib/ioat/ioat.c/ioat_ut
if grep -q '#define SPDK_CONFIG_IDXD 1' $rootdir/include/spdk/config.h; then
run_test "unittest_idxd" $valgrind $testdir/lib/idxd/idxd.c/idxd_ut
fi
run_test "unittest_iscsi" unittest_iscsi
run_test "unittest_json" unittest_json
run_test "unittest_notify" $valgrind $testdir/lib/notify/notify.c/notify_ut
run_test "unittest_nvme" unittest_nvme
run_test "unittest_log" $valgrind $testdir/lib/log/log.c/log_ut
run_test "unittest_lvol" $valgrind $testdir/lib/lvol/lvol.c/lvol_ut
if grep -q '#define SPDK_CONFIG_RDMA 1' $rootdir/include/spdk/config.h; then
run_test "unittest_nvme_rdma" $valgrind $testdir/lib/nvme/nvme_rdma.c/nvme_rdma_ut
fi
run_test "unittest_nvmf" unittest_nvmf
if grep -q '#define SPDK_CONFIG_FC 1' $rootdir/include/spdk/config.h; then
run_test "unittest_nvmf_fc" $valgrind $testdir/lib/nvmf/fc.c/fc_ut
run_test "unittest_nvmf_fc_ls" $valgrind $testdir/lib/nvmf/fc_ls.c/fc_ls_ut
fi
if grep -q '#define SPDK_CONFIG_RDMA 1' $rootdir/include/spdk/config.h; then
run_test "unittest_nvmf_rdma" $valgrind $testdir/lib/nvmf/rdma.c/rdma_ut
fi
run_test "unittest_scsi" unittest_scsi
run_test "unittest_sock" unittest_sock
run_test "unittest_thread" $valgrind $testdir/lib/thread/thread.c/thread_ut
run_test "unittest_util" unittest_util
if grep -q '#define SPDK_CONFIG_VHOST 1' $rootdir/include/spdk/config.h; then
run_test "unittest_vhost" $valgrind $testdir/lib/vhost/vhost.c/vhost_ut
fi
# local unit test coverage
if [ "$cov_avail" = "yes" ]; then
$LCOV -q -d . -c -t "$(hostname)" -o $UT_COVERAGE/ut_cov_test.info
$LCOV -q -a $UT_COVERAGE/ut_cov_base.info -a $UT_COVERAGE/ut_cov_test.info -o $UT_COVERAGE/ut_cov_total.info
$LCOV -q -a $UT_COVERAGE/ut_cov_total.info -o $UT_COVERAGE/ut_cov_unit.info
$LCOV -q -r $UT_COVERAGE/ut_cov_unit.info "$rootdir/app/*" -o $UT_COVERAGE/ut_cov_unit.info
$LCOV -q -r $UT_COVERAGE/ut_cov_unit.info "$rootdir/dpdk/*" -o $UT_COVERAGE/ut_cov_unit.info
$LCOV -q -r $UT_COVERAGE/ut_cov_unit.info "$rootdir/examples/*" -o $UT_COVERAGE/ut_cov_unit.info
$LCOV -q -r $UT_COVERAGE/ut_cov_unit.info "$rootdir/include/*" -o $UT_COVERAGE/ut_cov_unit.info
$LCOV -q -r $UT_COVERAGE/ut_cov_unit.info "$rootdir/lib/vhost/rte_vhost/*" -o $UT_COVERAGE/ut_cov_unit.info
$LCOV -q -r $UT_COVERAGE/ut_cov_unit.info "$rootdir/test/*" -o $UT_COVERAGE/ut_cov_unit.info
rm -f $UT_COVERAGE/ut_cov_base.info $UT_COVERAGE/ut_cov_test.info
genhtml $UT_COVERAGE/ut_cov_unit.info --output-directory $UT_COVERAGE
# git -C option not used for compatibility reasons
(cd $rootdir && git clean -f "*.gcda")
fi
set +x
echo
echo
echo "====================="
echo "All unit tests passed"
echo "====================="
if [ "$cov_avail" = "yes" ]; then
echo "Note: coverage report is here: $rootdir/$UT_COVERAGE"
else
echo "WARN: lcov not installed or SPDK built without coverage!"
fi
if grep -q '#undef SPDK_CONFIG_ASAN' $rootdir/include/spdk/config.h && [ "$valgrind" = "" ]; then
echo "WARN: neither valgrind nor ASAN is enabled!"
fi
echo
echo
Reference in New Issue View Git Blame Copy Permalink