390b364146
iscsi test scripts can now take two arguments - "iso" and then the sock type (posix or vpp). They need to be in that specific order too. nvmf test scripts also support "iso" and we want to add the transport type (rdma or tcp) as well. Even further out, we may want to use a sock type for nvmf, i.e. tcp transport with vpp. We also have the iscsi_tgt fio_remove_nvme.sh test that does both iscsi and nvmf. So to make this all work a bit nicer, add a new function called parse_common_script_args that will take the command line arguments to a script and set the appropriate variables, including defaults when a specific parameter isn't specified. We will use getopt-like behavior for this also, instead of enforcing a specific parameter order. Then a script could be called like this: test/nvmf/target/shutdown.sh --iso --transport=tcp --sock=vpp Individual test scripts then just need to do this after sourcing autotest_common.sh: parse_common_script_args $@ Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: Ifb8d7666384991482a2d425e26ffa7525b9ac15a Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455283 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
96 lines
3.3 KiB
Bash
Executable File
96 lines
3.3 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
|
|
testdir=$(readlink -f $(dirname $0))
|
|
rootdir=$(readlink -f $testdir/../../..)
|
|
source $rootdir/test/common/autotest_common.sh
|
|
source $rootdir/test/nvmf/common.sh
|
|
|
|
parse_common_script_args $@
|
|
|
|
rpc_py="$rootdir/scripts/rpc.py"
|
|
|
|
set -e
|
|
|
|
timing_enter rpc
|
|
nvmftestinit
|
|
nvmfappstart "-m 0xF"
|
|
|
|
$rpc_py nvmf_create_transport -t rdma -u 8192
|
|
|
|
# set times for subsystem construct/delete
|
|
if [ $RUN_NIGHTLY -eq 1 ]; then
|
|
times=50
|
|
else
|
|
times=3
|
|
fi
|
|
|
|
MALLOC_BDEV_SIZE=64
|
|
MALLOC_BLOCK_SIZE=512
|
|
|
|
$rpc_py construct_malloc_bdev $MALLOC_BDEV_SIZE $MALLOC_BLOCK_SIZE -b Malloc1
|
|
|
|
# Disallow host NQN and make sure connect fails
|
|
$rpc_py nvmf_subsystem_create nqn.2016-06.io.spdk:cnode1 -a -s SPDK00000000000001
|
|
$rpc_py nvmf_subsystem_add_ns nqn.2016-06.io.spdk:cnode1 Malloc1
|
|
$rpc_py nvmf_subsystem_allow_any_host -d nqn.2016-06.io.spdk:cnode1
|
|
$rpc_py nvmf_subsystem_add_listener nqn.2016-06.io.spdk:cnode1 -t rdma -a $NVMF_FIRST_TARGET_IP -s $NVMF_PORT
|
|
|
|
# This connect should fail - the host NQN is not allowed
|
|
! nvme connect -t rdma -n nqn.2016-06.io.spdk:cnode1 -q nqn.2016-06.io.spdk:host1 -a "$NVMF_FIRST_TARGET_IP" -s "$NVMF_PORT"
|
|
|
|
# Add the host NQN and verify that the connect succeeds
|
|
$rpc_py nvmf_subsystem_add_host nqn.2016-06.io.spdk:cnode1 nqn.2016-06.io.spdk:host1
|
|
nvme connect -t rdma -n nqn.2016-06.io.spdk:cnode1 -q nqn.2016-06.io.spdk:host1 -a "$NVMF_FIRST_TARGET_IP" -s "$NVMF_PORT"
|
|
waitforblk "nvme0n1"
|
|
nvme disconnect -n nqn.2016-06.io.spdk:cnode1
|
|
|
|
# Remove the host and verify that the connect fails
|
|
$rpc_py nvmf_subsystem_remove_host nqn.2016-06.io.spdk:cnode1 nqn.2016-06.io.spdk:host1
|
|
! nvme connect -t rdma -n nqn.2016-06.io.spdk:cnode1 -q nqn.2016-06.io.spdk:host1 -a "$NVMF_FIRST_TARGET_IP" -s "$NVMF_PORT"
|
|
|
|
# Allow any host and verify that the connect succeeds
|
|
$rpc_py nvmf_subsystem_allow_any_host -e nqn.2016-06.io.spdk:cnode1
|
|
nvme connect -t rdma -n nqn.2016-06.io.spdk:cnode1 -q nqn.2016-06.io.spdk:host1 -a "$NVMF_FIRST_TARGET_IP" -s "$NVMF_PORT"
|
|
waitforblk "nvme0n1"
|
|
nvme disconnect -n nqn.2016-06.io.spdk:cnode1
|
|
|
|
$rpc_py delete_nvmf_subsystem nqn.2016-06.io.spdk:cnode1
|
|
|
|
# do frequent add delete of namespaces with different nsid.
|
|
for i in `seq 1 $times`
|
|
do
|
|
$rpc_py nvmf_subsystem_create nqn.2016-06.io.spdk:cnode1 -s SPDK00000000000001
|
|
$rpc_py nvmf_subsystem_add_listener nqn.2016-06.io.spdk:cnode1 -t rdma -a $NVMF_FIRST_TARGET_IP -s $NVMF_PORT
|
|
$rpc_py nvmf_subsystem_add_ns nqn.2016-06.io.spdk:cnode1 Malloc1 -n 5
|
|
$rpc_py nvmf_subsystem_allow_any_host nqn.2016-06.io.spdk:cnode1
|
|
nvme connect -t rdma -n nqn.2016-06.io.spdk:cnode1 -a "$NVMF_FIRST_TARGET_IP" -s "$NVMF_PORT"
|
|
|
|
waitforblk "nvme0n1"
|
|
|
|
nvme disconnect -n nqn.2016-06.io.spdk:cnode1
|
|
|
|
$rpc_py nvmf_subsystem_remove_ns nqn.2016-06.io.spdk:cnode1 5
|
|
$rpc_py delete_nvmf_subsystem nqn.2016-06.io.spdk:cnode1
|
|
|
|
done
|
|
|
|
nvmfcleanup
|
|
|
|
# do frequent add delete.
|
|
for i in `seq 1 $times`
|
|
do
|
|
$rpc_py nvmf_subsystem_create nqn.2016-06.io.spdk:cnode1 -s SPDK00000000000001
|
|
$rpc_py nvmf_subsystem_add_listener nqn.2016-06.io.spdk:cnode1 -t rdma -a $NVMF_FIRST_TARGET_IP -s $NVMF_PORT
|
|
$rpc_py nvmf_subsystem_add_ns nqn.2016-06.io.spdk:cnode1 Malloc1
|
|
$rpc_py nvmf_subsystem_allow_any_host nqn.2016-06.io.spdk:cnode1
|
|
|
|
$rpc_py nvmf_subsystem_remove_ns nqn.2016-06.io.spdk:cnode1 1
|
|
|
|
$rpc_py delete_nvmf_subsystem nqn.2016-06.io.spdk:cnode1
|
|
done
|
|
|
|
trap - SIGINT SIGTERM EXIT
|
|
|
|
nvmftestfini
|
|
timing_exit rpc
|