source $rootdir/test/nvmf/common.sh

function migration_tc2_cleanup_nvmf_tgt() {
	process_shm --id $NVMF_APP_SHM_ID
	nvmftestfini
}

function migration_tc2_cleanup_vhost_config() {
	timing_enter migration_tc2_cleanup_vhost_config

	notice "Shutting down all VMs"
	vm_shutdown_all

	notice "Removing vhost devices & controllers via RPC ..."
	# Delete bdev first to remove all LUNs and SCSI targets
	$rpc_0 bdev_nvme_detach_controller Nvme0
	$rpc_0 vhost_delete_controller $incoming_vm_ctrlr

	$rpc_1 delete_nvme_controller Nvme0
	$rpc_1 vhost_delete_controller $target_vm_ctrlr

	notice "killing vhost app"
	vhost_kill 0
	vhost_kill 1

	unset -v incoming_vm target_vm incoming_vm_ctrlr target_vm_ctrlr
	unset -v rpc_0 rpc_1

	migration_tc2_cleanup_nvmf_tgt

	timing_exit migration_tc2_cleanup_vhost_config
}

function migration_tc2_configure_vhost() {
	timing_enter migration_tc2_configure_vhost

	# HACK: Make sure we stop detecting rdma-capable NICs on mlx
	modprobe mlx5_ib || :
	TEST_TRANSPORT=rdma TEST_MODE=iso nvmftestinit

	# Those are global intentionally - they will be unset in cleanup handler

	incoming_vm=1
	target_vm=2
	incoming_vm_ctrlr=naa.VhostScsi0.$incoming_vm
	target_vm_ctrlr=naa.VhostScsi0.$target_vm

	rpc_0="$rootdir/scripts/rpc.py -s $(get_vhost_dir 0)/rpc.sock"
	rpc_1="$rootdir/scripts/rpc.py -s $(get_vhost_dir 1)/rpc.sock"

	# Run nvmf_tgt and two vhost instances:
	# nvmf_tgt uses core id 2 (-m 0x4)
	# First uses core id 0
	# Second uses core id 1
	# This force to use VM 1 and 2.
	timing_enter start_nvmf_tgt
	notice "Running nvmf_tgt..."
	nvmfappstart -s 512 -m 0x4 --wait-for-rpc
	# Override the trap set in place via nvmfappstart()
	trap 'migration_tc2_error_cleanup; error_exit "${FUNCNAME}" "${LINENO}"' INT ERR EXIT
	rpc_cmd framework_start_init
	rpc_cmd nvmf_create_transport $NVMF_TRANSPORT_OPTS -u 8192
	mapfile -t json < <("$rootdir/scripts/gen_nvme.sh")
	rpc_cmd load_subsystem_config -j "'${json[*]}'"
	timing_exit start_nvmf_tgt

	vhost_run -n 0 -a "-m 0x1 -s 512 -u"
	vhost_run -n 1 -a "-m 0x2 -s 512 -u"

	local rdma_ip_list
	local nvmf_target_ip
	rdma_ip_list=$(get_available_rdma_ips)
	nvmf_target_ip=$(echo "$rdma_ip_list" | head -n 1)

	if [[ -z "$nvmf_target_ip" ]]; then
		fail "no NIC for nvmf target"
	fi

	notice "Configuring nvmf_tgt, vhost devices & controllers via RPC ..."

	# Construct shared bdevs and controllers
	rpc_cmd nvmf_create_subsystem nqn.2016-06.io.spdk:cnode1 -a -s SPDK00000000000001
	rpc_cmd nvmf_subsystem_add_ns nqn.2016-06.io.spdk:cnode1 Nvme0n1
	rpc_cmd nvmf_subsystem_add_listener nqn.2016-06.io.spdk:cnode1 -t rdma -a $nvmf_target_ip -s 4420

	$rpc_0 bdev_nvme_attach_controller -b Nvme0 -t rdma -f ipv4 -a $nvmf_target_ip -s 4420 -n "nqn.2016-06.io.spdk:cnode1"
	$rpc_0 vhost_create_scsi_controller $incoming_vm_ctrlr
	$rpc_0 vhost_scsi_controller_add_target $incoming_vm_ctrlr 0 Nvme0n1

	$rpc_1 bdev_nvme_attach_controller -b Nvme0 -t rdma -f ipv4 -a $nvmf_target_ip -s 4420 -n "nqn.2016-06.io.spdk:cnode1"
	$rpc_1 vhost_create_scsi_controller $target_vm_ctrlr
	$rpc_1 vhost_scsi_controller_add_target $target_vm_ctrlr 0 Nvme0n1

	notice "Setting up VMs"
	vm_setup --os="$os_image" --force=$incoming_vm --disk-type=spdk_vhost_scsi --disks=VhostScsi0 \
		--migrate-to=$target_vm --memory=1024 --vhost-name=0
	vm_setup --force=$target_vm --disk-type=spdk_vhost_scsi --disks=VhostScsi0 --incoming=$incoming_vm --memory=1024 \
		--vhost-name=1

	# Run everything
	vm_run $incoming_vm $target_vm

	# Wait only for incoming VM, as target is waiting for migration
	vm_wait_for_boot 300 $incoming_vm

	notice "Configuration done"

	timing_exit migration_tc2_configure_vhost
}

function migration_tc2_error_cleanup() {
	vm_kill_all
	migration_tc2_cleanup_nvmf_tgt
	migration_tc2_cleanup_vhost_config
	notice "Migration TC2 FAILED"
}

function migration_tc2() {
	# Use 2 VMs:
	# incoming VM - the one we want to migrate
	# targe VM - the one which will accept migration
	local job_file="$testdir/migration-tc2.job"
	local log_file
	log_file="/root/$(basename ${job_file%%.*}).log"

	migration_tc2_configure_vhost

	# Run fio before migration
	notice "Starting FIO"
	vm_check_scsi_location $incoming_vm
	run_fio $fio_bin --job-file="$job_file" --no-wait-for-fio --local --vm="${incoming_vm}$(printf ':/dev/%s' $SCSI_DISK)"

	# Wait a while to let the FIO time to issue some IO
	sleep 5

	# Check if fio is still running before migration
	if ! is_fio_running $incoming_vm; then
		vm_exec $incoming_vm "cat $log_file"
		error "FIO is not running before migration: process crashed or finished too early"
	fi

	vm_migrate $incoming_vm
	sleep 3

	# Check if fio is still running after migration
	if ! is_fio_running $target_vm; then
		vm_exec $target_vm "cat $log_file"
		error "FIO is not running after migration: process crashed or finished too early"
	fi

	notice "Waiting for fio to finish"
	local timeout=20
	while is_fio_running $target_vm; do
		sleep 1
		echo -n "."
		if ((timeout-- == 0)); then
			error "timeout while waiting for FIO!"
		fi
	done

	notice "Fio result is:"
	vm_exec $target_vm "cat $log_file"

	migration_tc2_cleanup_vhost_config
	notice "Migration TC2 SUCCESS"
}