On FreeBSD getaddrinfo() report positive error code
values, meanwhile Linux does it with negative ones.
Make sure that regardless of the system used,
error codes with same sign are reported.
This can be observed in the log reported in #2936.
Besides the above, in some instances replaced EINVAL
with the actual return value.
Change-Id: I7f88c314bdf5c3a03f8661c2213e33b2fc276ef7
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
nvme_tcp_parse_addr() uses getaddrinfo() to parse the address.
Depending on the system behavior of this function differs.
On FreeBSD the port is verified not to be exceeding 65535
for IPv4, meanwhile Linux does not check it at this point.
test_nvme_tcp_qpair_connect_sock() UT was attempting to
test the code path that is moved in this patch, but
on FreeBSD was encountering failure during getaddrinfo()
with different error code.
This patch moves the destination port check before
parsing addresses to take the same path regardless of
the system used.
Fixes#2936
Change-Id: I271e8c32e07a15dcf0e0ee7e90dd174c96b18858
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17095
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVME TCP driver supports up to 16 sge elements
while only 1 sge is reported - that leads to
unnecessary requests split which degrades perf.
Also pass correct iovcnt to nvme_tcp_build_iovs -
it should be 32. Otherwise, pdu header consumes
1 iov and data is written partially.
Add a check that at least data_len bytes were
appended to the socket iovs and fail request
otherwise.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ie83c807dd3fec2c7e7cbcda1e493d6fd74ebe599
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17006
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
nvme_rdma_qpair_abort_reqs() and nvme_tcp_qpair_abort_reqs() did not
initialize cpl->sqid. Hence, unexpected message was printed by
spdk_nvme_print_completion(). Fix the bugs in this patch.
Fixes#2930
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8b41166e58b26ce22c453ab85794b46dbe3dd3a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If spdk_sock_flush() returns an error, there's no reason not to
disconnect the qpair, as it usually means that that socket's connection
has been terminated.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I54e9bebc38e2a24a3baf69eb18ec3c654b210318
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The bahavior of spdk_sock_flush() was changed in 5433004ec to return the
number of flushed bytes and -1 with errno set to EAGAIN in case nothing
has been flushed (instead of returning 0). Therefore, we shouldn't
treat EAGAIN as an error in nvme_tcp_qpair_process_completions().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5473488b5b408cdc739921046f1a0cc2c98f98de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_tcp_read_pdu in a loop
nvme_tcp_read_pdu itself has a loop in it that runs until no more data
is available, so the extra loop does nothing.
Change-Id: I1471018e396c43187d1f06bd18ce8a6846a71c94
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15139
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
A loop inside 'nvme_tcp_qpair_process_completions' makes
'max_completions' actually behaving like a minimum:
do {
rc = nvme_tcp_read_pdu(tqpair, &reaped);
[...]
} while (reaped < max_completions);
Before this change 'max_completion' constraint, in its true sense,
was actually not respected and a loop inside 'nvme_tcp_read_pdu'
could be executed indefinitely as long as a recv state changed.
To prevent this behavior, max_completion must be passed to
'nvme_tcp_read_pdu' and used as an additional exit condition.
Signed-off-by: Szulik, Maciej <maciej.szulik@intel.com>
Change-Id: I28da962f4a62f08ddb51915b5d0dae9611a82dee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
An example:
There are 3 c2h data PDUs for one read request. Data digest is
enabled, accel_poller is enabled. The first PDU will be offload
to accel_poller. Then the others will use CPU to calc the crc32c.
If the last PDU is calc done and the first PDU is not calc down,
SPDK will direct success the read request, and free some objects.
When accel_poller calc down, it will find the request is freed,
and abort the SPDK.
Disable multi c2hs async process to prevent this situation.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I03c9e5b30622bbe84523c0836aa93cfed672896
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14079
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
psh len is not the same with header len.
Add an assert in nvme_tcp.c to prevent this happen again.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ibc250752bedf3da8994f79c51fb01577a222d364
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This "if" is of no use here.
The state machine has the "NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_CH"
state means the pdu does not receive enough length of header.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Id50943f77b570fd337e2bb4e3b45281018d159e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
state change function do not need to use swtich to do some work.
Do memset in state machine.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie66454d8f31860f403171f20858a6b4a24e3c76f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14502
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows mapping an nvme_request back to the
nvme_bdev_io.
This requires bumping up the max number of arguments per
tracepoint. 5 was previously chosen as max since it
exactly fit in 64 bytes (1 cacheline) when all
arguments were stored as uint64_t, but now that we
support uint32_t arguments we can afford extra
arguments when some of them are uint32_t. I've
bumped it to 8 so we can avoid having to touch
this value multiple times if we find some cases
where we need 7 or 8 args.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2ef5e59d10549860b47542e68c1c34efa63047f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Avoid putting a new req on the outstanding_reqs
TAILQ until we know it can be initialized
successfully. This avoids adding to the TAILQ
only to remove it just after.
This allow simplifies the outstanding_reqs TAILQ
handling, since reqs are now only inserted and
removed in one place each.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ccc41c14abd541ffcf2a602246e0671386840c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13991
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows similar logic in the pcie completion
path, including omitting error messages when aborting
aers by adding a print_on_error parameter to the
completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96df72280bb8fcbee3847fdc27f38e14a1bf3251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_tcp_req_complete_safe caches values on
the request, so that we can free the request *before*
completing it. This allows the recently completed
req to get reused in full queue depth workloads, if
the callback function submits a new I/O.
So do this nvme_tcp_req_complete as well, to make
all of the completion paths identical. The paths
that were calling nvme_tcp_req_complete previously
are all non-fast-path, so the extra overhead is
not important.
This allows us to call nvme_tcp_req_complete from
nvme_tcp_req_complete_safe to reduce code duplication,
so do that in this patch as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I876cea5ea20aba8ccc57d179e63546a463a87b35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
All callers of nvme_tcp_req_complete call
nvme_tcp_req_put immediately afterwards, so move
this call into nvme_tcp_req_complete.
This will help enable some improvements in later
patches.
Note that nvme_tcp_req_complete_safe has this same
functionality open coded right now, but that will
get changed in the next patch. It calls
nvme_tcp_req_put immediately after the TAILQ_REMOVE,
so do that in nvme_tcp_req_complete as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I368122bc49a7f0772e3011e5427e3c43618380eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
When running perf test, sometimes after CONNECT req's resp was
received and processed, the qpair still failed to change from state
CONNECTING to CONNECTED. For when it goes to nvme_fabric_qpair_connect_poll
-> nvme_wait_for_completion_robust_lock_timeout_poll to process the
CONNECT req's resp, the req may have not been finished in sock_check_zcopy,
although its resp has been received and processed, which means the
tcp_req->ordering.bits.send_ack is still 0 and the status->done still
is false. And after the req is completed in sock_check_zcopy, we need
to poll this qpair again to make the state enter CONNECTED.
And if icreq's resp received and processed before nvme_tcp_send_icreq_complete
is called by _sock_check_zcopy, the qpair will be stuck in CONNECTING
and it never proceed to send the CONNECT req. We also need to put it
in pgroup->needs_poll to fix it.
I can reproduce this bug with the following configuration.
target: 16NVMe SSD, running on 20 cores;
initiator: randread test using nvme perf with 32 cpu cores and
zerocopy enabled.
The error doesn't always occur. CONNECT failure is about 1 failure in
ten with the following log. And icreq failure is less frequent with
only target side's "keep alive timeout" log.
Error reported in initiator side:
Initialization complete. Launching workers.
[2022-05-23 14:51:07.286794] nvme_qpair.c: 760:spdk_nvme_qpair_process_completions:
*ERROR*: CQ transport error -6 (No such device or address) on qpair id 2
ERROR: unable to connect I/O qpair.
ERROR: init_ns_worker_ctx() failed
And target side shows:
Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode2 due to keep alive timeout
Change-Id: Id72c2ffd615ab73c5fc67d36c3ff8b730cebcef7
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12975
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Prepare for the later patch, and make the later patch code clean
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I12b175c86a5245f38dc76fe2d3918ec4b30a475a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12830
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
For a C2HTermReq PDU, there's no associated tcp_req, so we need to check
it for NULL before dereferencing it.
Also, while here, moved some of the assignments to the declarations to
reduce the number of boilerplate lines.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iac05ef0ba605e2f40d0026ad1b131c28d29f7314
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12845
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Make this a transport-level decision instead. TCP and RDMA do want to
abort, but PCIe cannot because these commands may still be receiving DMA
operations from the device.
Change-Id: I305acddc3819c903eb3217e8f710d4216d0b3931
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11509
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
The value of ack_timeout is calculated according to
the formula 2^(transport_ack_timeout) msec.
Signed-off-by: zhangduan <zhangd28@chinatelecom.cn>
Change-Id: I5a938635d70693ddd405fa5907555bb745b4df0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12215
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The process of matching qpair to poll group is split into
two distinct parts that occur on different threads.
See spdk_nvmf_tgt_new_qpair().
This results in a race condition for TCP between spdk_sock_map_lookup()
and spdk_sock_map_insert(), which are called in spdk_nvmf_get_optimal_poll_group()
and spdk_nvmf_poll_group_add() respectively.
Fixes#2113
This patch picks a hint from nvmf_tcp for next poll group,
which is then passed down to spdk_sock_map_lookup().
When matching placement_id exists, but does not have
a poll group assigned - the hint will be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4abde2bc9c39225c9f5dd7c3654fa2639bb0a27f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to make nvme_transport_ctrlr_disconnect_qpair()
asynchronous.
For nvme_transport_ctrlr_disconnect_qpair(), factor out operations after
returning from transport's specific ctrlr_disconnect_qpair() into a helper
function nvme_transport_ctrlr_disconnect_qpair_done().
Then move nvme_transport_ctrlr_disconnect_qpair_done() into the end of
the transport specific ctrlr_disconnect_qpair().
Additionally remove the operation to overwrite the qpair state to
DISCONNECTED from nvme_transport_connect_qpair_fail() because
this is duplicated and nvme_transport_ctrlr_disconnect_qpair() is responsible
to make the qpair disconnected even after it completes asynchronously.
Change-Id: I9c8faa7039d306d3e31a8f51826755ce8840a8aa
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10851
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_close() may not complete synchronously.
Then the following scenario is possible.
ctrlr_disconnected_qpair() calls spdk_sock_close(). Then any request may
complete and call _pdu_write_done(). qpair is still associated with a
poll_group and is inserted into the group->needs_poll list.
After ctrlr_disconnected_qpair() completes, disconnected_qpair_cb() is
called. disconnected_qpair_cb() calls spdk_nvme_ctrlr_free_io_qpair().
spdk_nvme_ctrlr_free_io_qpair() calls spdk_nvme_poll_group_remove().
spdk_nvme_poll_group() removes qpair only from the
group->disconnected_qpairs list.
Even after qpair->poll_group is nullified, qpair is still in the
group->needs_poll list.
Then spdk_nvme_poll_group_process_completions() polls all qpairs in
the group->needs_poll list and hits the assert.
Fixes the issue #2390
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6ede8bd3b7b1a57a34ac61436159975ab6253fbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11882
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
SPDK can submit more commands to remote NVMf target than allowed by
negotiated queue size. SPDK submits up to SQSIZE commands, but only
SQSIZE-1 are allowed.
Here is a relevant quote from NVMe over Fabrics rev.1.1a ch.2.4.1
“Submission Queue Flow Control Negotiation”:
If SQ flow control is disabled, then the host should limit the number
of outstanding commands for a queue pair to be less than the size of
the Submission Queue. If the controller detects that the number of
outstanding commands for a queue pair is greater than or equal to the
size of the Submission Queue, then the controller shall:
a) stop processing commands and set the Controller Fatal
Status (CSTS.CFS) bit to ‘1’ (refer to section 10.5 in the NVMe Base
specification); and
b) terminate the NVMe Transport connection and end the association
between the host and the controller.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ifbcf5d51911fc4ddcea1f7cde3135571648606f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_nvme_poll_group_remove() is available only for disconnected
qpairs now. Hence spdk_nvme_poll_group_remove() does not have to
check if qpair is connected and call nvme_ctrlr_disconnect_qpair().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3b05246c4be6adfa3392b8f0e5ecaf274a8a7795
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10846
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Previously, when connecting qpair, we allocated stats per qpair
if poll group is not used or we set stats per poll group otherwise.
Then when removing qpair from poll group, we cleared qpair->stats pointer.
However, if qpair is still not completely disconnected after removing
qpair from poll group, tqpair->stats is NULL and it causes a segmentation
fault.
Hence we set tqpair->stats to &g_dummy_stats instead of NULL.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ice6469627ce8d4bf4567f57c304759206b6432f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10844
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is necessary to failover another path when multipath is configured.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I0b6bcf63501e38f75efb4b0d6bec58abb4b67aef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10250
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
spdk_nvme_ctrlr_free_io_qpair can be called when
qpair is already disconnected. In that case qpair's
state is changed to NVME_QPAIR_DESTROYING and
transport's ctrlr_delete_io_qpair callback is
called. RDMA and TCP transports call
nvme_transport_ctrlr_disconnect_qpair in
the callback and since qpair's state is
not DISCONNECTED or DISCONNECTING, qpair
is disconnected for the second time.
If spdk_nvme_ctrlr_free_io_qpair is called
when qpair is in ENABLED state than nothing
changes, qpair will be disconnected before destroy.
PCIE/vfio_user don't implement transport disconnect
callback, so they are not affected.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I23e11856ecafb51669acf4a3118be049c11eecda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10326
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When data digest is enabled for a nvme tcp qpair, we can use accel_fw
to calculate the data crc32c. Then if there are multiple
c2h pdus are coming, we can use both CPU resource directly
and accel_fw framework to caculate the checksum. Then the datao value compare
will not match since we will not update "datao" in the pdu coming order.
For example, if we receive 4 pdus, named as A, B, C, D.
offset data_len (in bytes)
A: 0 8192
B: 8192 4096
C: 12288 8192
D: 20480 4096
For receving the pdu, we hope that we can continue exeution even if
we use the offloading engine in accel_fw. Then in this situation,
if Pdu(C) is offloaded by accel_fw. Then our logic will continue receving
PDU(D). And according to the logic in our code, this time we leverage CPU
to calculate crc32c (Because we only have one active pdu to receive data).
Then we find the expected data offset is still 12288. Because "datao" in tcp_req will
only be updated after calling nvme_tcp_c2h_data_payload_handle function. So
while we enter nvme_tcp_c2h_data_hdr_handle function, we will find the
expected datao value is not as expected compared with the data offset value
contained in Pdu(D).
So the solution is that we create a new variable "expected_datao"
in tcp_req to do the comparation because we want to comply with the tp8000 spec
and do the offset check.
We still need use "datao" to count whether we receive the whole data or not.
So we cannot reuse "datao" variable in an early way. Otherwise, we will
release tcp_req structure early and cause another bug.
PS: This bug was not found early because previously the sw path in accel_fw
directly calculated the crc32c and called the user callback. Now we use a list and the
poller to handle, then it triggers this issue. Definitely, it will be much easier to
trigger this issue if we use real hardware engine.
Fixes#2098
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I10f5938a6342028d08d90820b2c14e4260134d77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9612
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enable dump of transport stats in functional test.
Update unit tests to support the new statistics
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815aeea7d07bd33a915f19537d60611ba7101361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function may return an error and we should handle it
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I996ceb6e300bd9527385aded9068b2841e94a20d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9278
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
nvme_transport_poll_group_remove() clears qpair->poll_group. Hence
we should not use it after that.
Fixes#2170
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ceee8c66684e2d02b51b8a0f3d66aacbcb9915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9560
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows for creating admin qpair in an asynchronous mode and I/O
qpairs based on what the user specified in spdk_nvme_io_qpair_opts.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1801ea76d5a08b1bdc558eb0f18648f59454b654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9077
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This will allow us to call `connect_qpair_poll()` from
`process_completions()`. Otherwise, `nvme_fabric_qpair_connect_poll()`
which calls `process_completions()` might create a loop, which can cause
issues with `nvme_completion_poll_status` used for tracking the CONNECT
command by the fabrics code.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibd67bc3e011b238db264394e005b3268624cceef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8623
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
