To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Copy operation is defined by source and destination LBAs and LBA count
to copy. For destiantion LBA and LBA count we reuse exiting fields
`offset_blocks` and `num_blocks` in `struct spdk_bdev_io`. For source
LBA new field `src_offset_blocks` was added.
`spdk_bdev_get_max_copy()` function can be used to retrieve maximum
possible unsplit copy size. Zero values means unlimited. It is allowed
to submit larger copy size but it will be split into several bdev IOs.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I2ad56294b6c062595c026ffcf9b435f0100d3d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
And also related function pointers and APIs:
spdk_bdev_for_each_channel_msg;
spdk_bdev_for_each_channel_done;
spdk_bdev_for_each_channel_continue;
Change-Id: I52f0f6f27717d53c238faf2f998810c9c5ee45d4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 22.05
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id1a5358882dc496faa5b0b5c9a63b326c378c551
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the bdev-zone API, there are a few functions that takes a zone_id:
spdk_bdev_get_zone_info(), spdk_bdev_zone_management(), and the
spdk_bdev_zone_append() functions.
The way a zoned application is usually written is that it starts off
by getting the zone report for all zones (zone_id will be sent in as 0),
and then the application will keep the whole zone report in memory.
Therefore, an application usually have access to the zone_id/zslba for
all zones. However, there are cases, e.g. when getting an error on write,
where the completion callback will only have the lba of the write that
failed.
Add a helper function that can be used to get the zone_id/slba for a
given lba. Having this helper in bdev-zone will avoid SPDK applications
needing to provide their own implementation for this.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I978335f87f7d49bc33aed81afcaa6d9f0af8a1e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The backend device such as virtio-blk or virtio-scsi
may support the SIZE_MAX and SEG_MAX. Then SPDK needs
to split the big IO. Add this feature in bdev.
Change-Id: I2442e14121ccf141682964425e96382fec482af3
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4600
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was omitted in 296a6d9838
and is currently causing ABI inconsistencies.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ifb5b2360ff1ffbaffdc3b5d057047d035b98d909
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5368
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes function for bdev modules to
present options of the bdevs.
blob_bdev.h refers to the spdk_bdev_module, so would need
to be bumped too.
At this time spdk_bdev_module is left unchanged to prevent
that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3cacb087c998d928c5d8c2722b7f041d82bb43f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4748
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
The bdev_examine_bdev api will examine a bdev explicitly. After
disabling the auto_examine feature, a user could call
bdev_examine_bdev to examine a specific bdev he/she wants.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ifbbfb6f667287669ddf6175b8208efee39762933
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3219
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an important aspect of ABI versioning.
There was a change to the spdk_bdev_opts struct
which is accessible from the public API that results
in an ABI change.
There was also a change in the spdk_accel_module_if struct that
will affect new modules so its major version needs to be revved.
There was also a change in the publically accessible rmda_hooks
structure which forced an ABI change in the NVMe library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5cc6886fe01b4adc2836b6e15995471f0361dc29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also update the so minor version. Apparently spdk_bdev_module_list_find
was not declared global even though it matches the spdk_* regex for the
generic spdk map file. My guess is this is because it isn't actually
used in any file other than bdev.c even though it is declared in
include/bdev_module.h
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5c4e9ed06130e5d1dcc7235b5c2588f7b98a3ab3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new public header for zoned bdev. Zoned bdev is an
extension of the bdev interface. Generic concept comes
from ATA/SCSI and is also being worked as an NVMe TP.
Zoned device logical blocks space is divided into fixed-sized
zones. Each zone is described by its start logical block address
and capacity. Writes to a single zone need to be sequential.
After zone is fully written it need to be reset to write to it
again. Such writing schema could be very beneficial in terms of
write amplification factor for NAND based devices.
SPDK Flash Translation Layer library will be consuming this
interface in the future.
Extending SPDK bdev interface will allow to use existing bdev
infrastructure for this new type of devices.
Zoned device have several properties defined in spdk_bdev
structure:
- zone_size: default size of each zone
- max_open_zone: maximum number of open zones
- optimal_open_zones: optimal number of open zones to get
best performance on writes
Single zone properties are defined in spdk_bdev_zone_info
structure:
- start_lba: first logical block of z zone
- write_pointer: logical block address in the zone at
which next write shall occur.
- capacity: maximum number of logical blocks that may
be written in the zone when zone is empty.
- state: zone state
Several zone states are defined: Empty, Open, Full, Closed,
Read Only and Offline.
To change zone state zone actions are defined: Close, Finish,
Open and Reset.
Change-Id: I5fcc22d548c15743329344cae96f5ff73e268504
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Part of a larger series unifying and simplifying the library directory
structure.
Change-Id: I2782165aabbea9a31cc466fc7e3bb2b9263142dc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We had "./configure --with-uring" , but actually, it wasn't compiled.
we need add uring to Makefile that code will add this.
then we can continue to verify this module.
Change-Id: I8b98825f6795eb9f9e7b4947d1c7c3a44a6f0f64
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Just the starting point, base functions and structs.
Change-Id: I2ff2b672aa675a19b89e4449f1cc4aa664007f6f
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/435747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a beginning of series that will provide
common code for all NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I097b4a03ef79277659f45d217c7e4e58236c98bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445893
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add OCF module based on OCF meta-library
Open CAS Framwework (OCF) is high performance block storage
caching meta-library
It is open-source, published at https://github.com/Open-CAS/ocf
With this patch OCF-enabled device is represented in SPDK
as virtual bdev having core and caching devices as its base devices
This patch includes implementation of:
* OCF top adapter (vbdev_ocf.c)
* OCF bottom adapter (dobj.c, data.c)
* Adaptation layer for OCF (env/)
* OCF context abstractions (ctx.c)
Adaptation layer and context abstractions are not dependent on SPDK bdev
OCF bdev supports reads and writes, configured at startup
Other features will be added with separate patches
Change-Id: Ic2dcab378c8238d16f1e4b64d4374bdf257565bc
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/435708
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds FTL bdev. RPC scripts have been updated to allow for
creation and removal of FTL bdevs.
Change-Id: I82a5c5033b65bbeb67c238cae969a68cff767dcc
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431329
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also fix options that doesn't start with CONFIG_ prefix.
Change-Id: I32a24373328bab8f513d56c0c09b5a86589f690c
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427767
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We kept this disabled by default originally because it lacked
multiple iov support needed for vhost and nvmf in-capsule data.
Now that support has been added, there is no reason to not
enable it automatically - it has no extra package dependencies,
so requiring users to specify --with-raid to configure is just
an extra unneeded step.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9796370e12a6f93993e70083de36114a37851bd
Reviewed-on: https://review.gerrithub.io/426003
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Raid module:
============
- SPDK raid bdev module is a new bdev module which is
responsible for striping various NVMe devices and expose the raid bdev
to bdev layer which would enhance the performance and capacity.
- It can support theoretically 256 base devices (currently it is being
tested max upto 8 base devices)
- Multiple strip sizes like 32KB, 64KB, 128KB, 256KB, 512KB etc is
supported. Most of the current testing is focused on 64KB strip size.
- New RPC commands like "create raid bdev", "destroy raid bdev" and "get raid bdevs"
are introduced to configure raid bdev dynamically in a running
SPDK system.
- Currently raid bdev configuration parameters are persisted in the
current SPDK configuration file for across reboot support. DDF will be
introduced later.
High level testing done:
=======================
- Raid bdev is created with 8 base NVMe devices via configuration
file and is exposed to initiator via existing methods. Initiator is
able to see a single NVMe namespace with capacity equal to sum of the
minimum capacities of 8 devices. Initiator was able to run raw
read/write workload, file system workload etc (tested with XFS file
system workload).
- Multiple raid bdevs are also created and exposed to initiator and
tested with file system and other workloads for read/write IO.
- LVS / LVOL are created over raid bdev and exposed to initiator.
Testing was done for raw read/write workloads and XFS file system
workloads.
- RPC testing is done where on the running SPDK system raid bdevs
are created out of NVMe base devices. These raid bdevs (and LVOLs
over raid bdevs) are then exposed to initiator and IO workload was
tested for raw read/write and XFS file system workload.
- RPC testing is done for delete raid bdevs where all raid bdevs
are deleted in running SPDK system.
- RPC testing is done for get raid bdevs where existing list of
raid bdev names is printed (it can be all raid bdevs or only
online or only configuring or only offline).
- RPC testing is done where raid bdevs and underlying NVMe devices
relationship was returned in JSON RPC commands
Change-Id: I10ae1266f8f2cca3c106e4df8c1c0993ddf435d8
Signed-off-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-on: https://review.gerrithub.io/410484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This uses libiscsi to implement an iSCSI initiator bdev
module for SPDK. Still a lots of work to do on this - posting
it in case anyone is interested in working on this further.
A number of todo items are listed in a README in the lib/bdev/iscsi
directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I060e33de0cd6796246789bf0e1bb4f2df59d8f71
Reviewed-on: https://review.gerrithub.io/390313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Example showing the basics of a vbdev via a module that implements
the main functions, and a few extras, needed for a vbdev. The tests
also demonstrate how to configure an application to use a vbdev and
an underlying bdev
Change-Id: I67bf542143eb6532465cdb6af63c0f2ab7084c0e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/399768
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK can now be compiled without
the virtio driver.
Change-Id: I92999c871d28875d519749a73a7f2230c3881fbe
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382828
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SPDK bdev subsystem to allow basic IO to pmem pool
using pmemblk_* calls.
New pmem bdev can be constructed using RPC call
construct_pmem_bdev PMEM_FILE
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If5ca94161fe53644b8fccd3b77de5479da1b2e55
Reviewed-on: https://review.gerrithub.io/376973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia96ae78ff9530d953181ac5f7255a38f3c8ec430
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/375392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Supports both PCI mode (for usage in guest VMs) and
vhost-user mode (for usage in host processes). The rte_virtio
subdirectory contains a lot of code lifted from the DPDK
virtio-net driver. Most of the PCI and vhost-user code is
reused almost exactly as-is, but the virtio code is drastically
rewritten as the DPDK code was very network specific.
Has been lightly tested with both the bdevio and bdevperf
applications in both PCI and vhost-user modes.
Still quite a bit of work needed - a list of todo
items is included in a README in the module's directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85989d3de9ea89a87b719ececdb6d2ac16b77f53
Reviewed-on: https://review.gerrithub.io/374519
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6a138e1c1d775e8c8bfeede9600f8b0f799ecdad
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The VTune ittnotify_static.c code, as currently shipped, triggers
sign-comparison warnings when built with SPDK's CFLAGS.
Wrap the file in a pragma to disable the warnings for just this file and
allow a build with --enable-werror to pass.
Change-Id: I701fb6b88f09564fdadfd17e1d16d80df455940b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364511
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ica7f76a5354b27e6e5fd7114de1fdba46434b073
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/362994
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also change the discovery/nvmf.sh test to use it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56bce9a84bd46f13b6d4f34da81abf23413f2598
Move the scsi_nvme translation code from the SCSI library into bdev, and
provide a generic way to translate any bdev_io status into a SCSI
status.
Change-Id: Ib61a6209387c24543e31574e2b5ca249e2ac8b74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This virtual block device takes an underlying block device and splits it
into several smaller equal-sized block devices.
Change-Id: I6f6e686c1177b2e4885f7e88809ad329caae55bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add an RPC interface to list all blockdevs and their properties.
Change-Id: I50db730d5eff8cffcbe8fe5df6b3461457e8581e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
