Define struct spdk_bdev_io_error_stat privately in lib/bdev/bdev.c.
Add a pointer to struct spdk_bdev_io_error_stat to struct
spdk_bdev_io_stat.
Allocate spdk_bdev_io_error_stat for bdev and RPC, but do not allocate
spdk_bdev_io_error_stat for I/O channel.
Dump the contents of spdk_bdev_io_error_stat only if its total is
non-zero.
As a result of these, only spdk_bdev_get_device_stat() can query
spdk_bdev_io_error_stat for the bdev_get_iostat RPC. This will be
acceptable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Idae868afe65347a96529eedc3dcc692101de4a29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We can allocate an array for error status dynamically via negating
SPDK_MIN_BDEV_IO_STATUS.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id36a92bfaa906b445715c03b69a0fd9a154a49e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When merging data from one spdk_histogram_data to
another, the merging is only valid if the bucket_shift
for each structure is the same. Otherwise we are
combining data points that cover different ranges
of values.
So check that the bucket_shifts are the same before
merging. Change the return type to int to
return -EINVAL if structures with different
bucket_shifts are attempted to be merged.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If98e2d03384d85f478965956da2a42cfcff4713d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Basic IO completion counting can be done at the common
layer, to enable some level of stat tracking even for
transports that don't have transport-specific tracking
yet.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If04f854b97440089b8ad149b64cb59173c73975c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
The internal mempools were replaced with the newly added iobuf
interface.
To make sure we respect spdk_bdev_opts's (small|large)_buf_pool_size, we
call spdk_iobuf_set_opts() from spdk_bdev_set_opts(). These two options
are now deprecated and users should switch to spdk_iobuf_set_opts().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1424dc5446796230d103104e272100fac649b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Users can now specify a number of small/large buffers to be cached on
each iobuf channel. Previously, we relied on the cache of the
underlying spdk_mempool, which has per-core caches. However, since iobuf
channels are tied to a module and an SPDK thread, each module and each
thread is now guaranteed to have a number of buffers available, so it
won't be starved by other modules/threads.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1e29fe29f78a13de371ab21d3e40bf55fbc9c639
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15634
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The idea behind "iobuf" is to have a single place for allocating data
buffers across different libraries. That way, each library won't need
to allocate its own mempools, therefore decreasing the memory footprint
of the whole application.
There are two reasons for putting these kind of functions in the thread
library. Firstly, the code is pretty small, so it doesn't make sense to
create a new library. Secondly, it relies on the IO channel abstraction,
so users will need to pull in the thread library anyway.
It's very much inspired by the way bdev layer handles data buffers (much
of the code was directly copied over). There are two global mempools,
one for small and one for large buffers, and per-thread queues that hold
requests waiting for a buffer. The main difference is that we also need
to track which module requested a buffer in order to allow users to
iterate over its pending requests.
The usage is fairly simple:
```
/* Embed spdk_iobuf_channel into an existing IO channel */
struct foo_channel {
...
struct spdk_iobuf_channel iobuf;
};
/* Embed spdk_iobuf_entry into objects that will request buffers */
struct foo_object {
...
struct spdk_iobuf_entry entry;
};
/* Register the module as iobuf user */
spdk_iobuf_register_module("foo");
/* Initialize iobuf channel in foo_channel's create cb */
spdk_iobuf_channel_init(&foo_channel->iobuf, "foo", 0, 0);
/* Finally, request a buffer... */
buf = spdk_iobuf_get(&foo_channel->iobuf, length,
&foo_objet.entry, buf_get_cb);
...
/* ...and release it */
spdk_iobuf_put(&foo_channel->iobuf, buf, length);
```
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifaa6934c03ed6587ddba972198e606921bd85008
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The kernel vfio_pci driver module introduced vf_token checking
mechanism since kernel version 5.7, and has been supported by
DPDK. So add support for it to deal with the scenario of VF.
Signed-off-by: Jun Zeng <jun1.zeng@intel.com>
Change-Id: Ie9700fa395327da4e847c6213167284c148a64e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
While lvs->destruct is set in a few places, it is never read. Since it
is not used, it is removed.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Iee21e92c9049d143fca13930b4b5f328f9ec38f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15716
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Copy-on-write happens when cluster is written for the first time for
thin provisioned volume. Currently it is implemented as two separate
requests to underlying bdev: read of the whole cluster to bounce
buffer and then write of this buffer to the new location on the same
underlying bdev.
This patch improves copy-on-write flow by utilizing copy command of
underlying bdev if it is supported. In this case we have just one
request to bdev and don't need the bounce buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I92552e0f18f7a41820d589e7bb1e86160c69183f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
New `translate_lba` operation allows to translate blob lba to lba on
the underlying bdev. It recurses down the whole chain of bs_dev's. The
operation may fail to do the translation when blob lba is not backed
by the real bdev. For example, when we eventually hit zeroes device in
the chain.
This operation is used in the next commit to get source LBA for copy
operation.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I89c2d03d1982d66b9137a3a3653a98c361984fab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add max/min_read/write/unmap_latency_ticks into the struct
spdk_bdev_io_stat.
When initializing or resetting the instance of the struct
spdk_bdev_io_stat, initialize max to 0 and min to UINT64_MAX.
Then update max if a new value is larger than the current max,
and update min if a new value is smaller than the current min.
For the bdev_get_iostat RPC, it prints max and prints min if min is not
UINT64_MAX or 0 if min is UINT64_MAX.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1b30b3825c15e37e9f0cf20104b866186de788a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14825
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1979a9d867859d5cb5d05717bfcc677f07fa03f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
When use of deprecated featues is encountered, SPDK now calls
SPDK_LOG_DEPRECATED(). This logs the use of deprecated functionality in
a consistent way, making it easy to add further instrumentation to catch
code paths that trigger deprecated behavior.
Change-Id: Idfd33ade171307e5e8235a7aa0d969dc5d93e33d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
This introduces an enhanced spinlock that adds safeguards compared to
the default pthread_spinlock_t. In particular:
- A pthread_spinlock_t is still used, but additional error checking is
performed to ensure there is no undefined behavior on relock,
unlocking when not the owner, or destoying a locked lock.
- The SPDK concurrency model allows an SPDK thread to be migrated
between pthreads. Releasing a pthread spinlock on a different thread
from where it is taken is undefined behavior. If an SPDK spinlock is
held at a time that a time when a poller or message returns control to
thread_poll(), the program will abort.
- SPDK spinlocks can only be obtained from an SPDK thread.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6dd6493ab5f5532ae69e20654546405a507eb594
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This is unsafe, because we touch need_buf_* queues, which aren't
thread-safe. Also, documented this requirement in
spdk_bdev_io_get_buf()'s description.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iabc141e051c543fdd51f079ae212f69e980d8148
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We make decisions on how to pick a poll group for a new
qpair by looking at each poll group's current_io_qpairs
count. But this count isn't always accurate since it
doesn't get updated until after the CONNECT has
been received.
This means that if we accept a bunch of connections
all at once, they may all get assigned the same poll
group, because the target poll groups counter doesn't
get immediately incremented.
So add a new counter, current_unassociated_qpairs,
to account for these qpairs. We protect this counter
with a lock, since the accept thread will increment
the counter, and the poll group thread will
decrement it when the qpair receives the CONNECT
allowing us to associated with a subsystem/controller..
If the qpair gets destroyed before the CONNECT is
received, we can use the qpair->connect_received
flag to decrement current_unassociated_qpairs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8bba8da2abfe225b3b9f981cd71b6f49e2b87391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Currently we use qpair->ctrlr at qpair destroy
time to decide if we need to decrement the
qpair's poll group's qpair count. But this is
not correct - these counters get incremented
when the CONNECT is received, but qpair->ctrlr
doesn't get set until later.
So add a new connect_received bool to the spdk_nvmf_qpair.
Use this instead to determine when we should decrement
the poll group qpair counters.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I174a0fda36c4558171953bf58f2f5117bc074f76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
NVMf target reports copy command support if all bdevs in the subsystem
support copy IO type. Maximum copy size is reported for each namespace
independently in namespace identify data. For now we support just one
source range.
Note, that command support in the controller is initialized once on
controller create. If another namespace which doesn't support copy
command is added to the subsystem later, it will not be reflected in
the controller data structure and will not be communicated to the
initiator. Attempt to execute copy command on such namespace will
fail. This issue is not specific to copy command and applies also to
write zeroes and unmap (dataset management) commands.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I5f06564eb43d66d2852bf7eeda8b17830c53c9bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Added new API 'spdk_bdev_histogram_get_channel' to get histogram of
a specified channel for a bdev. A callback function is passed to it
to process the histogram.
Change-Id: If5d56cbb5fe6c39cda7882f887dcc9c6afa769ac
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
SPDK threads generally run on dedicated cores and locks should be rarely
contended. Thus, putting a thread to sleep while waiting on a mutex does
not free up CPU cycles for other pthreads or processes. Even when
running in interrupt mode, lock contention should be low enough that
spinlocks are a net win by avoiding context switches.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6e2e78b2835bbadb56bbec34918d998d75280dfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function can be useful to query if a thread
had spdk_thread_exit() called on it yet. Internally
we have both EXITING and EXITED state - so
!spdk_thread_is_running() can be used to detect a
thread that is in either of those states.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f6fb024a6b1bc895fdc5132c722abc10f5d30f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The "app thread" will always be the first
thread created using spdk_thread_create(). There
are many operations throughout SPDK that implicitly
expect to happen in the context of this app thread,
so by formalizing it we can start to make assertions
on this to help clarify and simplify locking and
synchronization through the code base.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7133b58c311710f1d132ee5f09500ffeb4168b15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
`BDEV_IO_NUM_CHILD_IOV` and `BDEV_RESET_IO_DRAIN_RECOMMENDED_VALUE`
are public macro definitions without `SPDK_` prefix, so we add the
`SPDK_` prefix to them.
Change-Id: I4be86459f0b6ba3a4636a2c8130b2f12757ea2da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15425
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces function spdk_fd_group_get_epoll_event, which
returns the epoll(7) event that caused the file descriptor group
callback function to execute. Rather than changing the signature of
spdk_fd_fn in order to pass the struct epoll_event, which would result
in a gigantic patch where there vast majority of users would simply have
to ignore the new argument, we introduce this new API that allows to
return the epoll_event only when really needed.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Suggested-by: John Levon <john.levon@nutanix.com>
Change-Id: I3debe1382d1c2bfec6ae4fea274ee38ed0b135fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
We should always build all function that are part of the API, even if
some of the libraries they depend on are missing. In that case, they
can return an error instead.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I72b450b3a1d62e222bd843e45be547d926414775
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an option "--generate-uuids" to bdev_nvme_set_options
RPC to enable generation of UUIDs for NVMes devices that
do not provide this value themselves. The identifier is
based on a serial number of the device, so a bdev
using this NVMe will always be assigned the same UUID.
Part of enhancement from #2516.
Change-Id: I86d76274e5702d14ace89d83d1e9129573f543e2
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Update code for read the virtual address width to use glob to locate the
Intel and AMD iommu capability registers. This code should work for all
AMD numa configurations.
Fixes issue 2730
Signed-off-by: Michael Piszczek <mpiszczek@ddn.com>
Change-Id: Ibf5789087b7e372d892b53101e4c0231809053f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Add an optional allowlist for RPC methods: if the method is not listed,
it is not allowed to be called or visible. This can be used to restrict
accidental mis-configurations, and generally helps locking down the
configuration surface.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ied78fc4b14b60cb94ed0852b92deb6df545cbec4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15275
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Add API spdk_bdev_io_get_submit_tsc to get submit tsc of a bdev I/O,
which can be used in bdev modules to avoid calling expensive
spdk_get_ticks().
Change-Id: Ifbcecb1bc663344997c5e73b72a1dfb5d0422946
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It doesn't make sense to have the size of the doorbells fixed and then
calculate the maximum number of queue pairs based on it, do it the other
way round. Also, add some sanity checks based on the spec.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I17e3509fb0a011128ca089ce78b7a296262e6f8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the following patches, we will add a feature to inject data
corruption to the error bdev module. For read I/O, we will have
to inject data corruption at completion. However, if we use
spdk_bdev_part_submit_request(), it will not be possible because we
cannot add any custom operation into the completion callback.
To fix the issue, modify spdk_+bdev_part_submit_request() and
rename it to spdk_bdev_part_submit_request_ext().
Fortunately, we can use stored_user_cb in struct spdk_bdev_io.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I46d3c40ea88a3fedd8a8fef6b68ee417c814a7a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Copy operation is defined by source and destination LBAs and LBA count
to copy. For destiantion LBA and LBA count we reuse exiting fields
`offset_blocks` and `num_blocks` in `struct spdk_bdev_io`. For source
LBA new field `src_offset_blocks` was added.
`spdk_bdev_get_max_copy()` function can be used to retrieve maximum
possible unsplit copy size. Zero values means unlimited. It is allowed
to submit larger copy size but it will be split into several bdev IOs.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I2ad56294b6c062595c026ffcf9b435f0100d3d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
And also related function pointers and APIs:
spdk_bdev_for_each_channel_msg;
spdk_bdev_for_each_channel_done;
spdk_bdev_for_each_channel_continue;
Change-Id: I52f0f6f27717d53c238faf2f998810c9c5ee45d4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
To support SQs allocated to a poll group other than the controller's
main poll group, we need to make sure to poll those SQs when we wake up
and handle the controller interrupt. As they will be running in a
separate SPDK thread, we will arrange for all poll groups to wake up
when we receive an interrupt corresponding to a vfio-user message
arriving.
This can mean needless wakeups: we don't (yet) have a mechanism to only
wake up the poll groups that correspond to a particular SQ write.
Additionally, as we don't have any notion of a poll group per
controller, this ends up polling all SQs in the entire poll group, not
just the ones corresponding to the controller we were handling.
As this has potential performance issues in many cases, it defaults to
disabled.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I3d9f32625529455f8d55578ae9cd7b84265f67ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In a use case, a custom sock module supports zero copy for read.
The custom sock module wants to keep the recv_buf_size to be sufficiently
large, for example 16MB. However, most upper layers overwrite the recv_buf_size
by a smaller value via spdk_sock_set_recvbuf() later. This is not desirable.
To fix the described issue, change the meaning of impl_opts->recv_buf_size
to be the minimum size, and spdk_sock_set_recvbuf() uses the maximum value
among the requested size, g_spdk_sock_impl_opts->recv_buf_size, and
MIN_SO_RCVBUF_SIZE.
We may have to change the code to initially create a socket. However,
for most cases, the upper layer calls spdk_sock_set_recvbuf() anyway.
Hence this fix will be minimal and enough.
For the use case, it is enough to change recv_buf_size of the posix sock
module. However, the custom sock module may support I/O uring in future.
Hence, change I/O uring sock module together.
Additionally, for consistency, change the meaning of impl_opts->send_buf_size
to be the minimum size, and spdk_sock_set_sendbuf() uses the maximum value
among the requested size, g_spdk_sock_impl_opts->send_buf_size, and
MIN_SO_SNDBUF_SIZE.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I051ba7cb50bc9dcad229e922198b04fe45335219
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The callback is executed with the opaque argument specified by the user,
not accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6f4388d8c4ceb37d4df174a6f4c0529012fe1f28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add new bdev property split_on_write_unit which, if set to true, causes
writes to be split to match write_unit_size and fail if not aligned to
or not multiple of write_unit_size.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Id49f58a3288ddf5cfe4921ce4020ae4bcdd67298
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously SPDK use libvfio-user library to provide emulated NVMe
devices to VM, but it's limited to NVMe device type only. Here we
add SPDK vfu_target library abstraction based on libvfio-user which
supports more PCI device types.
We will add virtio-blk and virtio-scsi devices emulation based on
vfu_tgt library in following patches, actually this library can
support NVMe emulation too, due to the fact that the NVMe emulation
is already exist, so we will keep the NVMe emulation which based on
libvfio-user directly as it is.
Change-Id: Ib0ead6c6118fa62308355fe432003dd928a2fae9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Identify and properly handle conventional zones (in smr drives) by using
zone type and WP state. Bdevs supporting zoned devices(like uring, nvme and
vbdev_zone_block) now update the zone type information. As a result, the
fio plugin now uses this info instead of hard coding the zone type.
Also adds new WP state(ZONE_STATE_NOT_WP) for handling zones w/o WP.
Signed-off-by: Indraneel M <Indraneel.Mukherjee@wdc.com>
Change-Id: If031e0742d68c55c35e95ddc33d478939bbd52fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
By doing the registration immediately upon mapping the BAR instead of
when the memory is inserted into the spdk_mem_map, we're able to
register BARs that are not 2MB multiples in size and alignment. The SPDK
API for registering a BAR already returns the physical/io address in the
map call, and it can be used directly without a call to
spdk_mem_register().
If the user does elect to later register the BAR using
spdk_mem_register(), we attempt to insert the 2MB aligned segments we
can into the spdk_mem_map. Users may still need to register memory for a
few reasons, such as making spdk_vtophys() work, or for setting up the
BAR as a target for RDMA. These cases still require 2MB aligned and
sized segments.
Change-Id: I395ae8803ec4bf22703f6f76db54200949e82532
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14017
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is first commit that should go into latest SPDK
after the code freeze for SPDK 22.09.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib972b328d1bb3fbab0da65a55c188bfcf1661798
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Per spec to assure correct operation of IAA decompression.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I745c5ecc09d220017a8da42b52f4ff7caa5e748c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14660
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fuzzing vfio-user require access to send request api
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I6c58b8ab4fd3394150bbb3e64b4f95bff93dae6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In prep for upcoming iovec based compression/decompression patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I413493f764bead9e56266e488b74f8bca979e225
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14633
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for adding both src and dst iovec support for compression.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I704b8d2bd459de03deb7f8ee45d76261910a3727
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13746
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A new parameter io_drain_timeout has been added to spdk_bdev
structure. If this value is unset, the bdev reset behavior
does not change.
The io_drain_timeout controls how long a bdev reset must wait for IO
to complete prior to issuing a reset to the underlying device.
If there is no outstanding IO at the end of that period, the reset
is skipped.
Change-Id: I585af427064ce234a4f60afc3d69bc9fc3252432
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14501
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
hpda value should be in range of 0 to 31.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie1329c831af06ccc8943a562c3f6396b635be518
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This is consistent with the use of terms in other parts of SPDK and fits
with the code living under module/
Change-Id: If182f7cf2d160d57443a1b5f24e0065f191b59b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds user write throttling - since writing to cache must be balanced
against the ability to compact the data to the base device, this
throttling mechanism allows for a smoother, more stable performance
levels - tying the user write speed to the compaction drain speed.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia85efeb387f17c6c080b23ae4e658a6d7e47a2fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add gathering of some performance counters and RPC for printing them.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I2e77d37fb66459240ff2e241f2b1f77c60f4eef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13390
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously we would always allocate the shm file based on
max (128) cores which is unnecessary. So use
spdk_env APIs to only allocate shm file size based
on the cores we might possible use.
With default settings, an shm file was 135MB before this
change, now an app using cores 0-7 will just use
about 9MB.
A lot of the trace-related code depended on there
*always* being a history for every core, even unused
ones, so a few additional changes were needed,
mainly the trace_parser library.
Tested by starting an app using a 0x4 core mask and
enabling a trace mask, generating some events, then
checking both the size of the shm file and that
spdk_trace works properly with the resulting file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie868b3e3658d6f82b2fea37cb87453e8a9e0abc4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14044
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
When doing live migration, there are some spdk_nvmf_ctrlr internal
data structures which need to be saved/restored, these data
structures are designed only for vfio-user transport, for
the purpose to extend them to support other vendor
specific transports, here we move them as public APIs,
users can use SAVE|RESTORE to restore a new nvmf controller
based on original one.
And remove the register from vfio-user transport, these registers
are stored in the common nvmf library.
Change-Id: I9f5847ef427f7064f8e16adcc963dc6b4a35f235
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11059
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new API will be used in the next patch
to prevent calling metods for the seconds time
when subsystem is initialized with config file
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I60ac8196e46ccb3b22b3af0607e1ba35a11a66a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14406
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These functions start from a given offset and seek for next
data or for next hole. For bdevs that do not support seeking,
it is assumed that only data and no holes are present
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I6bc831970223333b25683f60ce3fcbbfebb5bb81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
These functions start from a given offset and seek for first
io_unit belonging to an allocated cluster or first io_unit
belonging to an unallocated cluster
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I0c632e2b3dfd2e96aa22e21796e25a36f2f55f9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The code has always supported this, it just wasn't
documented in the header file. If caller passes NULL,
it will use the current thread to get the TSC. This
is actually the most common case.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I39ba8260f0cb277b9272441bd336294c3327d5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
before this change, we cannot pass a `const struct option*` to
spdk_app_parse_args() even the callee does not mutate the value pointed
by the pointer. in other words, we are not able to write something like:
static const option g_options[] = {...};
// ...
spdk_app_parse_args(argc, argv, &opts, "",
g_options, app_parse_arg, app_usage);
after this change, the requirement of the type of the `option` argument
is relaxed, so we can pass a `const struct option*` to this function
now.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Change-Id: I8794fcf92090f538743850a28ef4a2a8c357f121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Adds ability to send trim commands to FTL - only 4MiB aligned requests (both
for offset and length of request) will be processed. During a trim
operation an L2P page (containing 1024 4B entries, 1 per user LBA; which
is where the 4MiB alignment comes from) will be marked as unmapped.
After this point any L2P access to that page will actually set the
entries themselves as FTL_ADDR_INVALID. This is done to make the trim as
fast as possible, since for large requests it's probable that most of
the L2P pages aren't actually in DRAM.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4a04ee9498a2a6939af31b06f2e45d2b7cccbf19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The generic bdev layer has a public API spdk_bdev_get_qd() but its
value is the most recently measured value and it requires qd sampling
to be enabled. We will have bdev modules to want to wait until
all bdev_ios are aborted by a reset. Unfortunately, spdk_bdev_get_qd()
is not suitable for the custom bdev module. Furthermore,
spdk_bdev_channel::io_outstanding is not accessible from bdev modules.
Hence, add a new public API spdk_bdev_get_current_qd().
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ica30a8d8fe3264e28f0772a39bdf5f9ba72933e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12791
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some use cases want to abort every bdev_io submitted to the bdev by
traversing the bdev channels.
However, struct spdk_bdev_channel is private in lib/bdev/bdev.c.
Hence, add a helper function spdk_bdev_for_each_bdev_io() to execute
the function on the appropriate thread for every bdev_io submitted
to the bdev.
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
We keep this function as generic as possible because we may have
other use cases in future.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0209361bd1228ea8d4cb3241d0df07106be58d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12751
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
hexlify and unhexlify utils from vbdev_crypto.h have been moved so that
they could be included and reused outside of vbdev_crypto module.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: Ia074250176907f4803b84024239ecd4e9d8a5fc1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The word engine was both used (interchangeably with module) to refer to
the things that plug into the framework and to the framework itself.
This patch eliminates all use of the word engine that meant the
framework. It leaves uses of the word that meant "module".
Change-Id: I6b9b50e2f045ac39f2a74d0152ee8d6269be4bd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
spdk_accel_module_finish
Also move it into the internal header that defines the interface used by
modules.
Change-Id: I3aeb41e643f27a69556099cb8d166f64c9e5d67f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Writing to unallocated cluster triggers copy-on-write sequence. If
this cluster is backed by zeroes device we can skip the copy part. For
a simple thin provisioned volume copy this shortcut is already
implemented because `blob->parent_id == SPDK_BLOBID_INVALID`. But this
will not work for thin provisioned volumes created from snapshot. In
this case we need to traverse the whole stack of underlying
`spdk_bs_dev` devices for specific cluster to check if it is zeroes
backed.
This patch adds `is_zeroes` operation to `spdk_bs_dev`. For zeroes
device it always returns 'true', for real bdev (`blob_bs_dev`) always
returns false, for another layer of `blob_bs_dev` does lba conversion
and forwards to backing device.
In blobstore's cluster copy flow we check if cluster is backed by
zeroes device and skip copy part if it is.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I640773ac78f8f466b96e96a34c3a6c3c91f87dab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There's no reason for this parameter to be non-const and it makes this
functions pain to use when you want to hardcode a specific sock
implementation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifed4426a02ab54cbd51c8a2051b1eac010f86db9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
L2P cache allows for partial storing of L2P in memory, paging in and out
as necessary, lowering the total memory consumption.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I727fec9d2f0ade4ca73e872d62a2ec10cfdb0a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13353
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add parsing json as invalid cases:
1.json content that not enclosed in {}, it should be parsed as invalid, e.g.
"abc":"not encloesed in {}"
2.json content that 'subsystems' not associate with array, it will report error and return failure, e.g.
{"subsystems":"123"}
3.handle other invalid json formats, report and return failure, e.g. duplicate keys.
Added `spdk_json_find` API return errcode: EPROTOTYPE - json not enclosed in {}.
json config with content:
1."not enclosed in {}"
2."'subsystems' not be an array"
3."duplicate key in json"
and some other invaild cases will be regarded as invalid json config, and will fail to start app.
Fixes#2599
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I02574c9acd7671e336d4c589ebbff8ed21eb3681
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13754
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added a new RPC, vmd_rescan, that forces the VMD driver to do a rescan
of all devices behind the VMD. A device that was previously removed via
spdk_vmd_remove_device() will be found again during vmd_rescan.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ide87eb44c1d6d524234820dc07c78ba5b8bcd3ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added new RPC, vmd_remove_device, that allows users to remove a PCI
device managed by the VMD library simulating a hot-remove.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifb84818ce8d147d1d586b52590527e85fe9c10de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13957
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
This makes it possible to notify other PCI device providers (VMD) that a
PCI device is no longer used. The VMD will driver will unhook that
device and free any resources tied to it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I42752afbb371a1d33972dac50fd679f68d05b597
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Now that we have a attach_device() callback, the devices can be hooked
during spdk_pci_device_attach(). With DPDK, driver->cb_fn() is called
in pci_device_init(), so we need to do the same in
spdk_pci_hook_device().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iada8b83ce7592aa62561530192072a50ec3a904b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The primary motivation for this patch is to allow the VMD driver to be
notified of when users wants to attach a device under a given BDF and to
make it more similar to the regular PCI path. Currently, the way the
VMD driver scans for the devices is a little bit different. The initial
scan is done during initialization and there's a separate poller for
checking hotplugs. Also, there's no device_attach() interface, so with
hotplug poller disabled, it isn't possible to attach to a device not
present in the initial scan, even if the BDF is known.
This causes a few issues. First of all, the VMD library isn't notified
when a device is stopped being used (i.e. user calls
spdk_pci_device_detach()), so when such a device is hotremoved, it never
gets unhooked. But we cannot simply add a spdk_pci_device.detach()
callback, as this would break cases when user detaches a device (without
hotremove) and then tries to reattach it again (via
spdk_pci_device_attach()), as the VMD doesn't get notified about the
device_attach() call.
So, in order to resolve this, a device_attach() callback is added, which
will notify the VMD library that the user wants to attach a device under
a specific PCI address. Then, in subsequent patches, a
spdk_pci_device_provider.detach_cb() callback is added to make sure that
devices are unhooked once they're no longer used.
Once that is done, it'll be also possible to get rid of the VMD hotplug
poller by adding something like scan_cb() to spdk_pci_device_provider and
call it from spdk_pci_enumerate().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I084a27dcd12455f0f841440b7692375e80d07e84
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13883
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Hyper-V NVMe SSD controllers require admin queue
size to be even multiples of a page. Add quirk to
adjust the admin queue size if user overrides the
default value to something other than an even
multiple.
As part of this change, set the quirks earlier
when constructing a pcie controller, so that the
quirks value can be used in the generic
nvme_ctrlr_construct() function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I417cd3cdc7e3ba512ec412f4876b0e0b7432341c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14220
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The last line doesn't need the line break, otherwise
it will wrongly include the next line.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I06257b18d25c060b7c6bb00853fa44963fe5b439
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14241
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Adds API for fast shutdown - the ability for FTL to skip most
of the metadata persists made during clean shutdown, and relying
on their representation in shared memory instead. This allows for
faster update of SPDK (or just FTL, assuming no metadata changes),
with downtime reduction from 2-5 seconds to 500-1000 ms (for
14TiB+800GiB base and cache drives).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5999d31698a81512db8d5893eabee7b505c80d06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Commit a119799b ("test/nvme/aer: remove duplicated changed NS list log")
changed the nvme driver to read the CHANGED_NS_LIST log page before
calling the application's AER callback (previously it would read it
after).
Commit b801af090 ("nvme: add disable_read_changed_ns_list_log_page")
added a new ctrlr_opts member to allow the application to tell the
driver to not read this log page, and will read the log page itself
instead to clear the AEN. But we cannot add this option to the 22.01
LTS branch since it breaks the ABI. So adding this API here, which
can then be backported manually to the 22.01 branch for LTS users
that require it.
Restoring the old behavior is not correct for applications that
want to consume the CHANGED_NS_LIST log page contents itself to
know which namespaces have changed. Even if the driver reads the
log page after the application, that read could happen during a
small window between when a namespace change event has occurred and
the AEN has been sent to the host. The only safe way for the
application to consume ChANGED_NS_LIST log page contents itself
is to make sure the driver never issues such a log page request
itself.
Fixes issue #2647.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaeffe23dc7817c0c94441a36ed4d6f64a1f15a4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14134
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During compaction FTL moves valid user data from the nv cache drive to
the bottom device.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ia200af39cec80014fac3a10f20d2859b10a81088
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows mapping an nvme_request back to the
nvme_bdev_io.
This requires bumping up the max number of arguments per
tracepoint. 5 was previously chosen as max since it
exactly fit in 64 bytes (1 cacheline) when all
arguments were stored as uint64_t, but now that we
support uint32_t arguments we can afford extra
arguments when some of them are uint32_t. I've
bumped it to 8 so we can avoid having to touch
this value multiple times if we find some cases
where we need 7 or 8 args.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2ef5e59d10549860b47542e68c1c34efa63047f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This will allow us to map spdk_bdev_io events
to nvme_request events coming in a future patch.
Since we pass the nvme_bdev_io to the nvme driver
(not the spdk_bdev_io), we need to add tracepoints
for the nvme_bdev_io so that spdk_trace can
do the spdk_bdev_io->nvme_bdev_io->nvme_request
mapping.
An alternative would have been to pass the spdk_bdev_io
as the cb_arg to the nvme driver, but that change
seemed to invasive, and I think we will find other
uses for the nvme_bdev_io events anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id7519e689b01875093359f41a1ca2af912061a8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Calculates general priorities and trigger points for writers
(gc and compaction) dependent on number of free bands. GC will
be started at SPDK_FTL_LIMIT_START level, while at SPDK_FTL_LIMIT_CRIT
compaction needs to be stopped and only GC is allowed to work.
This is done to make sure FTL doesn't run out of free bands and deadlock
itself.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I1aab98503c2e79e97f8e4e9fb1257530fa9770e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia30d57b25b559a89997963a3f68797ff3b9d6409
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14093
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifdbd46d3f3f2ddb9c422eeca5e3f487fd056438f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14092
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Adding -Wno-address-of-packed-member to Makefiles
here, although we should consider disabling this
warning globally in SPDK just like DPDK.
Suppress abidiff errors around spdk_app_opts -
structure size and offsets of all existing members
were unchanged, so there is no ABI breakage here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2249eddb604d7b44180cadb92ba30edcd946b9bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14091
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Suppress abidiff errors around spdk_bs_opts - structure
size and offsets of all existing members were unchanged,
so there is no ABI breakage here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b109e0787446a598eee413d1595a68b4c87f830
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14090
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If346cb6628b3a288a3ac720104b501589eba3b83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14089
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Similar to the disable_read_ana_log_page ctrlr_opt,
this enables the application to tell the NVMe
driver to *not* read the CHANGED_NS_LIST log
page in response to a NS_ATTR_CHANGED AEN, and
will do the read itself.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie447734187d4a4cb95ceef6e0131b640b8ba5984
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14088
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7d8e71531cfd8823f1594149217b841ecf490e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Various opts structures in SPDK have a size member, to enable
ABI compatibility should fields be added in the future.
But this requires the strucures to be packed, otherwise for
example a structure may be padded at the end, and a new
field added may just consume some of that padding.
So add STATIC_ASSERTS for the current sizes in this
patch. Upcoming patches will make the structures packed
and add in reserved fields to fill in holes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9107d01d7b533f8542385a3538894bcd9f8c465d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
We were using "TR" for "tracker" previously, but
we are tracing the nvme_requests, not nvme_trackers,
so use the right names for the trace object to avoid
confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3886d74b162138c2cdbe0017224d9494f74966c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13990
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The public interface of lib/accel is now include/spdk/accel.h
Change-Id: Id94f623a494eb1b524b060f4413f633073ea7466
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
They no longer need to see the definition of this structure.
Change-Id: I3e3bb5942a50da22e0bf34aa8c10b9d812f42d2f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13915
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help keep the mixing of this code with the framework code to a
minimum.
Change-Id: I5937ebd84f32068456cdf2b9e03d3e194c760a87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13912
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_internal/accel_engine.h will become the API for accel modules. Move
anything in there that a module doesn't need to see into
lib/accel/accel_internal.h
Some of the software fallback definitions didn't even need to be in a
header and were moved to accel_engine.c
Change-Id: Idb8b12b1c0c1de3d462b906e3df3ba9ee8f830b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13911
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
These are 1:1 - they do not need to be separate objects.
Change-Id: I74ab52863f911d9be59ce98e1525302b5bd40846
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Note, this change only sets defaults for the ID/KEY,
more specific use cases like NVMe/TCP may set the ID and KEY on a per connection basis.
Also simplify PSK identity string, that isn't NVMe focused.
NVMe libraries using this will need to construct more complicated
identity strings and pass them to the sock layer.
Example:
rpc.py sock_impl_set_options -i ssl --psk-key 4321DEADBEEF1234
rpc.py sock_impl_set_options -i ssl --psk-identity psk.spdk.io
./build/examples/perf --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
./build/examples/hello_sock --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
Change-Id: I1cb5b0b706bdeafbccbc71f8320bc8e2961cbb55
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13759
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This avoids having to update this comment should
we increase the number of arguments supported.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67591ce96433f38a2463ec462151b3ce0ae44e53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13987
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There was SPDK_NVME_TRANSPORT_CUSTOM but it was not usable for fabric
custom transport because spdk_nvme_trtype_is_fabrics() returned false.
Use 4097 for SPDK_NVME_TRANSPORT_CUSTOM_FABRICS and update
spdk_nvme_trtype_is_fabrics() to include SPDK_NVME_TRANSPORT_CUSTOM_FABRICS
because it is not defined in the specification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I457845e74d4e8150c9376f9bc253a8ee1ad8c1d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13947
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
SPDK NVMe RDMA initiator used the default PD per RDMA device. Default PD
may be changed when all QPs for the RDMA device are destroyed and created
again.
For multipath, the RDMA zero copy feature require the PD per RDMA device
to be persistent when all QPs for the RDMA device are destroyed and
created again.
Maintain such persistent PDs in this patch.
Add two APIs, spdk_rdma_get_pd() and spdk_rdma_put_pd().
In each call of two APIs, synchronize RDMA device list with
rdma_get_devices().
Context may be deleted anytime by rdma-core. To avoid such deletion,
hold the returned array by rdma_get_devices().
RDMA device has PD, context, ref. count, and removed flag. If context
is missing in rdma_get_devices(), set the removed flag to true. Then,
if the ref count becomes zero, free the PD and the RDMA device.
The ref. count of a RDMA device is incremented when spdk_rdma_get_pd()
is called and decremented when spdk_rdma_put_pd() is called.
To simplify synchronization, sort the returned array by
rdma_get_devices().
To avoid resource leakage, add destructor function and free all PDs
and related data at termination.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I093cb4ec2c7d8432642edfbffa270797ccf3e715
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13769
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Instead of passing each parameter to create a module, just have the user
make one and pass it in. This makes it easier to change the module
definition later.
Change-Id: I3a29f59432a6f0773129d7b210fbc011175b2252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13909
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Masked by how accel_perf was doing decomp verificiation which is
changed in the next few patches and verifies these fixes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icb03fc169bf8d2f05396addaf1db56d6de1827d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13038
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Docs explaining how to use the RPC are in the next patch in the
series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7dab8fdbeb90cdfde8b3e916ed6d19930ad36e66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12848
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RPC provides a list of initialized engine names along with
that engine's supported operations.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I59f9e5cb7aa51a6193f0bd2ec31e543a56c12f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13745
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
this is a prework for further changes - with lock on generic layer
lock on specific transport (e.g. tcp, rdma) layer becomes optional
possibly it won't be required if some contract introduced on public
interfaces (to be considered)
- spdk_nvmf_poll_group_[create|destroy]
- spdk_nvmf_tgt_listen_ext, spdk_nvmf_tgt_stop_listen
- spdk_nvmf_get_optimal_poll_group
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib132babf9e7022342129fe795991cdad834e7f53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13665
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
allow DSA device to async offload crc32 calculation in nvmf-TCP
This patch can use DSA to accelerate crc32 computation, making
the io performance of TCP paths using crc32 approach the io
performance of TCP paths that do not use crc32.
Using SLIST to minimize the performance drop. SLIST has less
operation compared to TAILQ.
Thinking about memory thrashing, we should use the same memory as
possible to receive new PDUs. So, insert newly freed PDU in to head
is better.
The performance drop is within 1% compared to the TCP path without
crc32.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I480eb8db25f0e730cb198ca5ec19dbe3b4d38440
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11708
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Many SSD drives can support up to 64 bytes of metadata
size, so here we define a macro in bdev.h and set the
default size to 64.
Change-Id: Ie30831d61cd66b8f5904daa38101d1a77141214e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12355
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the options in sock_impl_opts could be different for different
sockets (even if they're using the same impl). However, outside of a
few selected options (recv_buf_size, send_buf_size), there was no
interface to change them.
This change will allow users to change impl_opts on a per-socket basis
when creating a socket. Sockets created through accept() inherit
impl_opts from the listening socket.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7628ae19def25cef6ffa62aa54bd34e446632579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Now that spdk_sock has impl_opts, we no longer need to store a copy of
impl_opts.zerocopy_threshold in spdk_sock.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I96377e330351b1afb57811578acfadf05d53f49c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
It'll make it possible to change some of the impl_opts options on a
per-socket basis, as well as make it easier to use fields common to all
implementations in the generic layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id3b5e0a0b302fdecc2387d07fb87b75b487dc5c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It'll make it possible to reuse this code for asynchronous read
requests.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2c2c44feee0821c972aa2a43d8a8ec81f3ce4ef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Extracted the code that completes requests to a separate function. This
will make it possible to use it with read requests, which aren't using
request queues.
Change-Id: I101f36bab6def753d548d766acd17020b504873e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch defines a new function, spdk_sock_readv_async(), which allows
the user to send a readv request and receive a callback once the
supplied buffer is filled with data from the socket. It works simiarly
to asynchronous writes, but there can only be a single outstanding read
request at a time.
For now, the interface isn't implemented and any calls will return
-ENOTSUP. Subsequent patches will add support for it in the uring
module and as well as emulation in the posix module.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I924e2cdade49ffa18be6390109dc7e65c2728087
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
