Fix the issue that target->run_timer and target->reset_timer needed to
be called on the core which runs the target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia36681ac51a46f272e5738d0ae63838939e71e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_put_io_channel() sends message if the core on which it is
called is different from the core which called spdk_get_io_channel().
However, ch->ref is guarded by mutex at free and we should call
spdk_put_io_channel() on the core which called spdk_get_io_channel()
as possible as we can.
Hence move spdk_put_io_channel() from end_run() to bdevperf_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8816b28625869662c6b9124036b619b76bf96a3c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch changes io_target_group from array to linked list
and removes g_coremap.
In particular, change how to choose io_target_group for each
target, and reverse if condition in performance_dump(). These
changes will the code clearer.
Besides, remove blockdev_heads_destroy() because it just calls
bdevperf_free_targets() now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I170a1c58fe2df9a11902224dd8634462a9af6123
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The role done by the variables has been replaced by lcore of
struct io_target_group. So we can delete them safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ed856c8ccfda1d72b3fc97677fecaf295df37af
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Hold associated core ID in io_target_group and use it later.
This simplifies event calls in bdevperf because we don't need
to get core ID from io_target.
The next patch will delete g_coremap safely because io_target_group
manages lcore correctly now. lcore of the struct io_target will
be deleted too but it will be more later.
The subsequent patches will move bdevperf from core based to
thread based and the added core ID will be removed eventually in
this patch series. However these changes are helpful even so.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia763a79bc3810a15485285aebb9fc15a8d48332f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478705
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add struct io_target_group and chain associated io_targets to it.
Particularly, replace current target->next pointer by TAILQ, pass
not the head io_target pointer but the io_target_group pointer to
event call, and use TAILQ_INSERT_HEAD() in bdevperf_construct_target()
to keep the current ordering.
Besides, add pointer to the queued io_target_group to struct
io_target to use it later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib37db825a863f7795c55c19fae0d38efd80c607e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478563
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Number of entries of the array g_head is spdk_env_get_core_count(),
and hence we did not need to break from some for loops. For them,
continue to the next iteration will be more appropriate and do the
changes in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6e97099622d58f44d92482beaf24ca61de4ca038
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extract bdevperf_target_get_task() from bdevperf_submit_single().
Then inline the contents of bdevperf_prep_task() into
bdevperf_submit_single() and remove bdevperf_prep_task().
These two patches simplify a little weird nesting and parameter
passing of bdevperf_submit_single().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I37f4ca732d6d9479553365cd612b90dec51e2228
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This patch and the next patch will simplify the nesting of task
submission.
Factor out the operation to get free task from io_target into a
helper function bdevperf_target_get_task(). Use
bdevperf_target_get_task() in bdevperf_submit_single() and
reset_target().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4cb147a5a6c84cc2b0e517dc35a106d37affaa10
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Other tools have already changed these units to IOPS and MiB.
Unify the units, that makes the result comparing more clear
with bdevperf and perf.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Iedc47f5757839e1abbcbaf5d97179c90ab130773
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
When we are using bdevperf for some sort of reset test, we need to make
sure that it doesn't cause failed requests to stop the test. We already
have the g_reset flag, but we can't use that for tests where we only
want to simulate a target disconnect event.
Change-Id: I0cbf495708a1e6680682b099e8c17862ec6ff3e2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new parameter "-C" to allow to send I/Os to all specified
bdevs from all allocated cores. This means any bdev will get I/Os
from all specified cores. This is same logic together with the "-T"
parameter to specify one bdev.
Change-Id: I1e38d49824afe8084fcad72b18649657eb5c50cd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470805
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If number of bdev is smaller than number of configured
cores, the bdevperf tool will exit abnormally.
Change-Id: I88e08d1bc71af8b927c701c80f6ddd2bf22c659c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469669
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When zcopy APIs are used, target->buf cannot be passed directly
to the bdev layer. Hence in addition to the last patch, copy target->buf
to the buffer allocated by spdk_bdev_zcopy_start() when g_verify or
g_reset is true. When g_verify or g_reset is true, a little performance
degradation will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2caa4d0423f727954220c4ceac6b37f1b532013d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a bdev_io pointer to struct bdevperf_task.
In bdevperf_zcopy_get_buf_complete() which is the callback to
spdk_bdev_zcopy_start(), bdev_io is saved into the current task.
Then bdevperf_submit_task() will call spdk_bdev_zcopy_end()
by using the saved bdev_io.
Besides, when spdk_bdev_zcopy_start() is called with populate=false,
increment target->current_queue_depth when it completes successfully,
and do not increment target->current_queue_depth when the corresponding
spdk_bdev_zcopy_end() is called with commit=true.
The reason is that IO processing is already started when
spdk_bdev_zcopy_start() is called.
The next patch will use zcopy APIs for write I/O with verify or
reset cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I12f3b1ccac726abe345a64f06e33d65d2a3538fd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467900
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is a preparation to use zcopy APIs for write I/O.
When we use zcopy APIs for write I/O, submit_task() will be called
in the callback to spdk_bdev_zcopy_start().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15bfce5b39ddd65459274fad7628f2c8fbb22327
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to use zcopy APIs for write I/O.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I685d0e1e5860c7ec72d4680c48ee7c0b5e9071bd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to use zcopy APIs for write I/O.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7c544fc08db029e1b5ff32458e53dcbb014a5722
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Two return code checks are added to bdevperf_complete().
Checking if return code is not false will be enough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic097e37c2d74aa3860bb06931f320c9f18c45640
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After recent changes, that function can not return
NULL anymore, so remove all redundant checks from
various SPDK libraries.
Change-Id: If80344b6fa81ad5f87a7086804dba221522cd7e2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Starting with this patch it is possible to issue
"perform_tests" RPC to bdevperf application.
It will allow to configure the bdevs after startup,
but before starting the tests.
bdevperf in addition to usual cmd line params for tests,
need to be started with '-z' argument.
After that it is possible to start test using
'./bdevperf.py perform_tests'.
Tests can be issued multiple times in the same app run.
At this time the RPC does not take any arguments
for the tests. All are assumed to be set in
the command line.
This is series for adding RPC to bdevperf app.
Change-Id: If71853b1aa742f9cbf3d65c8d694a0437aad4500
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458598
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Previously particular tests results were printed out
after stopping the app framework.
Since RPC will allow to start/end tests without ending
the app, showing results is moved for the very end of tests.
This is series for adding RPC to bdevperf app.
Change-Id: Iae330af9f3e53e9e045248be399ee420e57f7f73
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460446
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No need to stop IO on all cores for the targets,
if there are no targets configured.
At this time it is not possible to trigger that,
but in the future shutting down the app when
no test is running will not exit cleanly.
This is series for adding RPC to bdevperf app.
Change-Id: I5feb75d630c4628e0cdf1ee749a16ec93d573aea
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460445
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Separate out bdevperf_free_targets() so that in the future
RPC can directly call it after completing the tests.
This is series for adding RPC to bdevperf app.
Change-Id: I53b17022342fffbd6c8a763247e0cd20928a4117
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460444
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Separated out bdevperf_test() from bdevperf_run(),
so that in future RPC can directly call running the tests.
All global setup done at start of the application remains
in bdevperf_run().
This is series for adding RPC to bdevperf app.
Change-Id: I85950d4941d4325486a7dcf89f9766dcdd302657
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460443
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I3bd2c284a210acb3bc31a6443e52a237c4c4d1ae
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Bdevperf up to now didn't use unregister callback when opening target
block deice. This is unsafe if test scenario involves target bdev
unregistering voluntarily, although with recent bdev layer update
not registering hotremove callback has become safer.
To be on the safe side, this patch registers a callback to transit
gone target into the I/O drain mode in case the target unregisters
during runtime.
Changes wrt previous versions of the patch:
- incorporated review comments
- updated callback functionality
- updated patch description.
Change-Id: I0dad2f4a7cf4acb22b363e23e4b670ca73d8c6f2
Signed-off-by: Andrey Kuzmin <akuzmin@jetstreamsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447956
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Moving verifying test parameters to single function function.
This is start of series that will add RPC to start bdevperf tests,
allowing configuration beforehand.
In future verify_test_params() will be used to verify parameters
passed via RPC as well.
Change-Id: I0aff7d9fa9f99205b3559b0ea081aa3690013faa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow the user to select target bdev to be used by bdevperf. It's useful
when the config contains multiple bdevs, but only one is supposed to be
utilized by bdevperf directly.
Change-Id: I51aa645dcf60a4413057d86f68fe24442b280367
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The target list is now updated inside bdevperf_construct_target. That
way, if the target is successfully created, it'll already be on the
target list once this function finishes.
Change-Id: I364c45005c28deadae37615b6ac85f3860fc5080
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use separate buffers for metadata transfer if bdev supports it.
Change-Id: Ie0fa3d3c1f5b14f99c13f2d6b5b22edc216c6d64
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This callback type takes 1 argument instead of 2.
Change-Id: Ic3710fafb2828f08fc064f7658849b3d20521092
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
g_io_size is already verified not to be zero when args are originally parsed,
and if g_io_size < data_block_size, then g_io_size % data_block_size != 0.
So current error log is not correct and just testing if IO size is multiples
of block size will be correct.
Change-Id: I5d32425e251773f1c96740c674b4d238dfb80f8d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444310
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Extract DIF check type settings from the bdev and hold them
in the target, then generate DIF for write I/O based on them.
Change-Id: Ice85121423b6b8545e45d7def1aabed59ed6ce8e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enlarge data buffer to include metadata if md_size is not 0 and
md_interleave is true of target bdev. Then generate and verify
data pattern by skipping metadata field.
If md_size is not 0 but md_interleave is false, return immediately
until bdev supports APIs with separate metadata.
Change-Id: Ia3c2ae5fbcc5b7612585f1dfeb5d30e821d48acf
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The possible reason of failure of task construction is out of memory.
Hence it's OK to return pointer to the constructed task simply.
Change-Id: If6e270caefb61192c8f0055506d957c3c5d07016
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdevperf have returned immediately if -ENOMEM, continued if failure
due to other reasons, and registered the created target otherwise.
So, keep this behavior by passing the reference to the pointer to
struct io_target, and check both return code and the value of the
reference.
And this refactoring will clarify the logic related with target
assigment to cores.
Change-Id: I24593f7b4523daf4395643bdc8886499c36ea3c7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Coremap is a global variable in bdevperf, and add the prefix "g_" to
it.
Change-Id: Ia22802ce2152d8748cffc6916197be4ddd615618
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
-S takes a parameter for how many seconds to wait
between each stats output - that was missing in the
usage message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I05a2f770996a72db4894b275932a308e2355cbcc
Reviewed-on: https://review.gerrithub.io/c/443282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The stop handler already calls blockdev_heads_destroy(), so we
don't need to call it if bdevperf_construct_targets_tasks()
fails. Calling it twice actually results in double-frees and
other types of memory corruption.
Fixes#592.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba92b1ae64453036829a67ab6f3dad970a368af0
Reviewed-on: https://review.gerrithub.io/c/442628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Error check of strtol is left to users of it. But some use cases
of strtol in SPDK do not have enough error check yet.
For example, strtol returns 0 if there were no digits at all.
It should be avoided for each use case to add enough error checking
for strtol.
Hence spdk_strtol and spdk_strtoll do additional error checking
according to the description of manual of strtol.
Besides, there is no use case of negative number now, and to keep
simplicity, spdk_trtol and spdk_strtoll allows only strings that
is positive number or zero.
As a result of this policy, callers of them only have to check if
the return value is not negative.
Subsequent patches will replace atoi to spdk_strtol because atoi
does not have error check.
Change-Id: If3d549970595e53b1141674e47710fe4dd062bc5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Need to check user input and return status of parsing
to prevent app or target from crashing.
Input checking function will be added in the future.
Change-Id: I8167ac13306ae4f81e2cacb80edd9dcf9382c374
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Much of this was originally applied by Darek in
6f5840d22 but then had to be reverted due to NVMe-oF
MR issues in a817ccf5. Now that the NVMe-oF MR issues
have been resolved, we can reapply these changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I58d603523901c78dbc81279078a09b2a24c091e6
Reviewed-on: https://review.gerrithub.io/436547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
