This will allow for these routines to be used by the external
entities, allowing for more granular approach.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibb753a4900ef927b82e50b7c8af2780d8ff695ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
These routines can only handle a single buffer; double check that is the
case, and fail if not.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I136482c27c73655887c49405f747b8ed073f7b69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use req->iov as needed, to make it easier to remove req->data later.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I3084254ec44cfc4e11f8beccc61c895232daf272
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use req->iov as needed, to make it easier to remove req->data later.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ie625f374e846f7e6afd6a5d143a5174d27d419b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add a new API for incremental copying in or out of an iovec, and replace
current code to use the new API.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I088b784aef821310699478989e61411952066c18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We should always called the unregister callback on
the same thread that spdk_bdev_unregister() was
originally called. So save the thread pointer and
use an spdk_thread_send_msg() to make sure it gets
called on the correct thread when the unregister
finishes.
Also add unit test that reproduces the original
issue.
Fixes issue #2883.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib3d89368aa358bc7a8db46a8a8cb6339340469d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16554
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 95aa1a7337,
which introduced a race between timeout command
and reading its subprocess PID.
Change-Id: I4450449f8bd3fa5a71a11e5ea445dce360a4ec06
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16510
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
test/ublk/ublk.sh 256
will now create 256 ublk devices, to try to test
the ctrlr_cmd queueing logic when the ctrl uring
runs out of sqes.
It's actually difficult to induce the condition,
since the kernel SQPOLL thread can usually keep
up with the SPDK process submitting the control
commands. The best way to induce it is by
*not* stopping the disks at the end of a test
with a lot of disks, and letting ublk_destroy_target
stop all of them at once. Even then, with the
ublk logging enabled, even that extra delay for
each commands opcode is enough to help the
SQPOLL thread to keep up. Commenting out the
first UBLK_DEBUGLOG in ublk_ctrl_cmd() does help
it run out of sqes, at least in my setup.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f7a6ca29fd69613d44a89adc7e60563b274d155
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will help with debugging more complex
ublk configurations - needed especially knowing
that ublk kernel driver is still a bit flaky.
Create a new LOG flag "ublk_io" for the existing
per-IO debug logs, and use the existing "ublk"
flag for ctrl-related debug logs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic019c1e837b04dbf5d210c46a98cfbed732278a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Avoid hotplug application timeouts on machines
with multiple NVMe drives by scaling app run time
to number of NVMe drives.
Furthermore, change the way we wait for hotplug
app initialization by using "perform_tests" RPC,
and termination by starting it via timeout command.
Second part of the series fixing #2201.
Fixes#2201
Change-Id: Id82c8e8f6b9e870a55c4f43a11c755982855deeb
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15965
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The gpt bdev module has an off-by-one error. When it
calculates the size of the partition, it simply does
"end - start", when really it should be "end - start + 1".
We cannot just fix it by changing the math here, any
consumers of the partition may have put down metadata
on the partition based on the old size.
So instead add a new SPDK partition type. SPDK will keep
the existing off-by-one behavior when it finds the old
partition type, but will use the correct math when finding
the new partition type.
Fixes issue #2801.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48eb48c781f1968b59e52b4477ca45e9c81eac11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This driver was removed from the mainline kernel over 3 years
ago, hence there is no much point in keeping it around.
Currently, this attempt simply spams build log with info
that we failed to load said driver.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8bc65f652f6476a9cdf4fa4849ee03d8d547402c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, drop parallel build as it's not a good fit for QAT's make
structure - its recursive nature ends up failing on ocassion
where some *.a libs cannot be found by targets that depend on
it (one such pitfall is libosal.a built for the kernel space).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8c773c234d80fcfcad2c0991e3f5202dfb1d2018
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
This is done in order to align our requirements with the 6.x kernel
that we already support under the CI (as part of the fedora37 build).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I88ff07a0de49c0f9ff90caf54b2690c90ef108b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add a script with functional tests for
CPU core locking mechanism.
Change-Id: I041b31f04b6cfb0ba26a7d172c83686646d8386e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15465
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If probe attached before io switch to second port, previous port is
still present in trace log.
This patch fix issue #2865
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: If45d07a737721c6754392b7db8cce426e6090bd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16386
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we do not have a way to dump opts
for virtio_blk transports. This patch introduces
necessary changes to let us save and load those
via JOSN config.
Change-Id: I7ee4f31062f3d4a264f322e66a67ba3d075f1d75
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the perf application is run in the background the script would
not pick up its potential crash - the main condition itself was simply
checking if app is still running. Since there were occasions where
the failure was missed up until the cleanup stage, try to catch it
early on by verifying perf's exit status - hook it into NOT() as
the app is expected to fail by the test but we need to filter out
crash scenarios.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9a9304616c0a4dba42467f65c1a2c770352f08ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Any script or function called with run_test needs to
either execute or not be called at all.
Summary of all test executions is gathered based on that.
It would be possible to not catch that the test didn't execute.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib93d4ee9cccbcfa8506f9022f1a7cce97c0434f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The addition of mbuf splitting requires a few more unit tests.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I24309911d40aec14e7f7c504be276c7f79e3ef1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Quite a few changes from the vbdev compress unit tests
mainly due to plumbing and structural changes from the
code under test now being an accel_fw module instead of
a bdev module. Coverage of critical functions matches
what it was for the common code.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia40c7a0ed72a427e71c00607d93e215e0265fcb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The new compressdev unit tests will re-use quite a bit of code
from the old compress vbdev module so start this that so that the
next patch will be easier to review what's changed for as the
accel compressdev unit tests.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id91bb8630213e6046a5b38f31227476a33eb0675
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
directly
This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.
Unit tests for the new module will follow in a separate patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add rpc methond for ublk target creation and destruction. Before to
add ublk device, need to initialize ublk target to create ublk
threads, corresponding an rpc methond to destroy ublk target is
also added. It will deinitialize ublk target and release all ublk
devices.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I5db0cf9cc68745440df999169aa1c61111010e02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
ublk backend could support ublk driver with kernel. Specify
configuration parameter to start it up.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I55e7d757e04315b25e9bfab5fdcbb6621be3e29e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15680
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The mlx5 accel module supports crypto operations.
Data buffer is split into `block_size` chunks and each
chunk is enrypted individually.
mlx5 library contains some utility functions that will
later be used by other libraries, this lib will be
exntended later.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iacdd8caaade477277d5a95cfd53e9910e280a73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All DPDK related code is removed, handling of
RESET command was sligthly updated.
Handling of -ENOMEM was updated for cases when
accel API returns -ENOMEM
Crypto tests in blockdev.sh were extended with more
crypto_bdevs to verify NOMEM cases - that failed
with original vbdev_crypto implementation
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1feba2449bee852c6c4daca4b3406414db6fded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The configuration is generated based on existing host's NUMA
topology (as seen via sysfs) instead of a total number of cpus as
it was done before. New logic attempts to load balance VMs and
their cpus based on nvme drives' NUMA location. If there is no
enough cpus left under the target node, all remaining nodes are
checked. For the sake of the performance, cpus are not mixed
between different numa nodes.
Disk map is created by mapping VMs to existing nvme drives
based on their NUMA location. Extra VMs are assigned in bus
order of the nvme drives.
SPDK cpus are split by matching the VM-to-nvme NUMA ratio.
Static list can be defined as well to override this behavior.
https://trello.com/c/HSoRtQkO/401-deprecate-vhost-performance-python-helper-script
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia63c6f9a472a685d252efd110eaba7b114a87d2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Attempt to send any queued writes even if the socket is in a group. This
will not work if there is a send task already outstanding.
Change-Id: Icc0b5884e3d247042194ad26b30340ceb824886c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
That was the main intention behind the following patch:
https://review.spdk.io/gerrit/c/spdk/spdk/+/15356
however, the introduced logic was faulty. Fix it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I84ec7ba79d477756c9064e592e93140e68038bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Bdevperf build directory was changed but
not updated in this script.
Change-Id: I939b541dbea6c94e7e2d3592890f4a4e8998d321
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This is the port of the vbdev compress logic into the accel
framework. It includes just one enhancement, to only fill each
mbuf in either src or dst array with max "window size" param to
avoid QAT errors. Note that DPDK ISAL PMD was not ported as we
have native ISAL compression in accel now.
Note: ISAL w/DPDK is still built w/this patch, that can't be
removed until the vbdev module moves to accel fw as it still
depends on DPDK ISAL PMD.
Follow-on patches will include addition C API for PMD selection,
this patch just gets equivalent functionality going. Upcoming
patches will also convert the vbdev compress module to use the
accel framework instead of talking directly to compressdev.
More patches will also address comments on vbdev common code
that addressed here would make the review challenging.
This patch also fixes a bug in the ported code that needs to
be fixed here to pass CI. Capability discovery was incorrect
causing all devices to appear to not support chained mbufs,
with the mbuf splitting code this is important to get right.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f526404819b145ef26e40877122ba80a02fcf51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We will be creating a new accel module for DPDK
compressdev. We can heavily leverage all of the
code from the existing vbdev_compress.c file. So
just copy that file exactly to start, and then the
next patch will contain only the deltas for removing
the bdev/reduce plumbing and adding the accel
plumbing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4f6ca1c2dad92eb8dd38b351602b65b8cb4ee4e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Mellanox Build Bot
Adding script mdns_discovery.sh to test the mDNS discovery service at the host.
The script tests the RPC commands bdev_nvme_start_mdns_discovery, bdev_nvme_stop_mdns_discovery
and bdev_nvme_get_mdns_discovery_info.
avahi-publish tool is used to simulate the advertisement of the discovery service of the target subsystem.
Signed-off-by: Parameswaran Krishnamurthy <parameswaran.krishna@dell.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieace458f87b5d9bd51aeb651d9419d07b6fee6d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make vbdev_crypto_destruct() return 1 to signal that program
execution should wait for spdk_bdev_destruct_done() function,
which is added inside _device_unregister_cb().
This change is related to _vdev_dev_get() not being able
to find the devices, when called from _cryptodev_sym_session_free(),
as it uses device driver name, which might already be freed.
This occurs only during bdev module finish, when crypto bdevs
are being unregistered and vbdev_crypto_finish() proceeds to
call bdev name deletion without waiting for the unregister
callbacks to complete, which ultimately results in reading
freed pointers.
This only happens when code execution takes path for DPDK 22.11+.
Change-Id: Id9a43d07c90aef7a82867383fd77354ac521a3e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16290
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is a combination of commits which update vdev_crypto:
110d8411e bdev/crypto: do not create mempool for session private data
495055b05 bdev/crypto: update rte_cryptodev usage for DPDK 22.11
02caed6b5 bdev/crypto: remove mempool usage matching < DPDK 19.02
5887eb321 bdev/crypto: do not track type of crypto session
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I30c4f76e4e7b4865a7daa638d357888bb5e02071
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The io paths' stat will get lost when they are destroyed. Record
the stat in the nvme_ns structure.
Change-Id: I12fc0b04fac0d59e7465fe543ee733f2822a9cdb
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14744
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have stat per bdev I/O channel, but for NVMe bdev
multipath, we don't have stat per I/O path. Especially for
active-active mode, we may want to observe each path's statistics.
This patch support IO stat for nvme_io_path. Record each nvme_io_path
stat using structure spdk_bdev_io_stat.
The following is the comparison of bdevperf test.
Test on Arm server with the following basic configuration.
1 Null bdev: block size: 4K, num_blocks:16k
run bdevperf with io size=4k, qdepth=1/32/128, rw type=randwrite/mixed with 70% read/randread
Each time run 30 seconds, each item run for 16 times and get the average.
The result is as follows.
qdepth type IOPS(default) IOPS(this patch) diff
1 randwrite 7795157.27 7859909.78 0.83%
1 mix(70% r) 7418607.08 7404026.54 -0.20%
1 randread 8053560.83 8046315.44 -0.09%
32 randwrite 15409191.3 15327642.11 -0.53%
32 mix(70% r) 13760145.97 13714666.28 -0.33%
32 randread 16136922.98 16038855.39 -0.61%
128 randwrite 14815647.56 14944902.74 0.87%
128 mix(70% r) 13414858.59 13412317.46 -0.02%
128 randread 15508642.43 15521752.41 0.08%
Change-Id: I4eb5673f49d65d3ff9b930361d2f31ab0ccfa021
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support to specify rr_min_io for multipath round-robin policy,
which makes I/O switches to another io path after rr_min_io I/Os are
rounted to current io path.
Change-Id: I09f0d8d24271c0178ff816fa63ce8576b6e8ae47
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support selecting io path according to number of outstanding io of
each path in a channel. It's optional, and can be set by calling
RPC "bdev_nvme_set_multipath_policy -s queue_depth".
Change-Id: I82cdfbd69b3e105c973844c4f34dc98f0dca2faf
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we submit more tasks than supported by qp,
extra tasks are queued on io_channel. Later completion
poller tries to resubmit these tasks one by one. That
is not efficient since every enqueu_burst may cause
doorbell updates in HW.
Instead add a check for qpir capacity and submit
appropriate number of requests. If qpair is full,
tasks are queued in dedicated list. This approach
should remove or minimize the need to resubmit
individual crypto operations.
This also handles a case where there are no entries
in global pools (crypto_ops or rte_mbuf)
Fixes issue #2756
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iab50e623e7a82a4f5bef7a1e4434e593240ab633
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously vbdev_crypto used DPDK directly and
the restriction on max IO size was propagated to
generic bdev layer which split big IO requests.
Now, when DPDK code is a standalone accel module,
this restriction on max IO size is not visible to
the user and we should get rid of it.
To remove this limitation, allow to submit crypto
operations for part of logical blocks in big IO,
the rest blocks will be processed when all submitted
crypto ops are completed.
To verify this patch, add a functional test which
submits big IO verify mode
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I0ee89e98195a5c744f3fb2bfc752b578965c3bc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Lcov is disable for clang due to being time-consuming. This patch
enabled it for fuzzer only. `llvm-gcov.sh` is a wrapper for llvm-cov
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I96ef6ad4fc4ecb92b063070fd2410ca88209f5b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15356
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move parallel arrays of response buffers and response SGLs from
qpair to a new responses object.
Use options to create the responses object.
Use spdk_zmalloc() to allocate the responses object because qpair
is also allocated by spdk_zmalloc().
The purpose is to share the code and the data structure between
SRQ is enabled and disabled.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ia23fe7328ae1f2f551fed5863fd1414f8567d602
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Unit tests are already linked with isa-l-crypto if CONFIG_ISAL_CRYPTO is
set, so there's no need to stub them. And by not stubbing them, we can
do tests involving actual encryption/decryption.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I162a2cd26112cc5adb8eeed7336f4280aa4bdb6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Accel modules can now implement the get_memory_domains() callback to
indicate the types of memory domains they support. If unimplemented, a
module is assumed not to support memory domains and accel will take care
of pulling/pushing data to local buffers prior to passing a task to be
executed by a module.
For now, similarly to the bdev layer, we only check if a module supports
memory domains, but we don't verify the types of the domains. That
could be easily added in the future, if necessary.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia513f4f31124672b705b6dd33a2624f0ae94d3ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It allows accel to store private data per each opcode/module without
having to change externally visible structures or allocate anything when
a module is registered. Since a single module can service multiple
opcodes at the same time, so some of these values might be duplicated.
However, there are only a handful of opcodes, so it shouldn't be a
problem.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I609a6ccc2d241cb9b8273cc2c6d1933d2bc25e0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the destination buffer is in remote memory domain, we'll now push the
temporary bounce buffer to that buffer after a task is executed.
This means that users can now build and execute sequence of operations
using buffers described by memory domains. For now, it's assumed that
none of the accel modules support memory domains, so the code in the
generic accel layer will always allocate temporary bounce buffers and
pull/push the data before handing a task to a module.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia6edf266fe174eee4d28df0ca570c4d825436e60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the source buffer is from a remote memory domain, we will now pull it
to the temporary bounce buffer before a task is executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I476684a4359410c69dd69a2b425b9e61d4c55a7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All operations are using iovecs to describe their buffers and only
encrypt/decrypt additionally used nbytes to store the total size of a
src buffer. We don't really need this value in the generic accel code,
so we can let modules calculate it, if necessary. That way, we won't
waste cycles calculating it if a module doesn't use it and it makes the
code a bit easier, as we won't have to deal with the fact that nbytes is
only valid for certain operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I29252be34a9af9fd40f4c7fec9d0a0c1139c562d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also, since this was the last operation using dst and nbytes, these
fields were removed from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0d6b090e101c016d1bdcbe7a3bee7d6f691f1c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, since this was the last operation using src, remove this field
from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I55fd98697ef4f92a13dd0563b4adf9ccb0af171b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement the resize function for RAID0. raid0_resize() calculate the
new raid_bdev's block count and if it is different from the old block
count, call spdk_bdev_notify_blockcnt_change() with the new block count.
A raid0 bdev always opens all base bdevs. Hence, if the size of base
bdevs are reduced, resize fails now. This limitation will be removed
later.
Add a simple functional test for this feature. The test is to create
a raid0 bdev with two null bdevs, resize one null bdev, check if the
raid0 bdev is not resize, resize another null bdev, check if the raid0
bdev is resized.
test/iscsi_tgt/resize/resize.sh was used a reference to write the test.
Using jq rather than grep&sed is better and hence replace grep&sed by jq
of test/iscsi_tgt/resize/resize.sh together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07136648c4189b970843fc6da51ff40355423144
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent changes done to iobuf and accel framework
require us to adjust iobuf pool sizes when running
tests with high number of VMs and Vhost controllers.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1a445379e755939875aebe97a6360ec0b0586287
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16267
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fuzzer logs may become huge, it's better to store it as file.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ia85eb88fd648dc2fb90f5a3bd389e6df2ef0106e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Keep corpus directory that trigers new code coverage.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I2a5154472588669fddd87c97cc952da1a92ae0ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, make it possible to remove copy operations following a fill
operation if they're using the same buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7da195ce80650a02c5db99d9400ee692f797b1f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some of the copy operations can be elided, so they're not the best for
this kind of test. So, use another operation, decompress, that can be
appended to an accel sequence.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic59e7678436bdf1d5ab6eb103de4cc0c0c347b9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace src2 with an iovec + iovcnt and rename it to s2 to
keep the naming consistent with the source buffer (s).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I44787128377addd514818ec5aaec084b1a31f0c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace dst2 with an iovec + iovcnt and rename it to d2 to
keep the naming consistent with the destination buffer (d).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib394c127eeb5890451535ff485f96f7edd2897a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch is first in the series of patches aimed to make all accel
operations describe their buffers with iovecs. The intention is to make
it easier to handle tasks in a generic way.
It doesn't mean that we change the API - all function signatures are
preserved. If a function doesn't use iovecs, we use the aux_iovs array.
However, this does mean that each accel module that provides support for
a given operation will need to be adjusted to use iovecs.
Additionally, update the unit test checking copy elision to verify the
buffers of the copy operation that is left.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9e6d8d1be3b8b9706cb4a6222dad30e8c373d8fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Users can now specify buffers allocated through `spdk_accel_get_buf()`
when appending operations to a sequence. When an operation in a
sequence is executed, we check it if it uses buffers from accel domain,
allocate data buffers and update all operations within a sequence that
were also using those buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I430206158f6a4289e15f04ddb18f0d1a2137f0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15748
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It's common to set up an iovec around a single buffer; add a helper for
this.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic4183e29d78549ec102045c6af0b5ff448cb5c59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
And use it in a couple of places.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4b86cef0e9489c1435c0206dd6c5cda4ffe4d33a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When a buffer is get, it does not need to reserve the space
for tailq header.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I0aa2d77739fbb86a6e2df1c00a772aff1cb7c6e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In order to connect to a zoned SPDK NVMe-oF target the ZNS specific
identify functions must be implemented and the supported ZNS opcodes
must be set accordingly.
Implementing ZNS specific identify functions to return the 'I/O Command
Set specific Identify Namespace data structure (CNS 05h)'
(`spdk_nvmf_ns_identify_iocs_specific`) and 'I/O Command Set specific
Identify Controller data structure (CNS 06h)'
(`spdk_nvmf_ctrlr_identify_iocs_specific`).
Those functions return a null filled data structure for any I/O Command
Set other than ZNS.
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Change-Id: I6b9529ce0a86400afb01d4e09cbdb3e5c3a68514
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16044
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously we use 1024MiB static memory for bdevperf, but it may invoke
DPDK dynamic memory allocation when calling `spdk_zmalloc`, and this
part of new memory region isn't registered to remote target process,
vfio-user like solution is designed for pre-allocated memory, so here
we can increase the static memory size as a workaround.
Also add debug log when testing.
Fix issue #2846.
Change-Id: I509093a12a63db2c9e9797da10eab9b5ee0b3aac
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reduce connect-disconnect iterations to 5 to
save execution time. 5 should be enough for a
basic test which is significantly extended in
nightly version.
Change-Id: I44549ccb96f69e925471acc91a1704a0b9e61d2b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Branch `vfio-user-patch1-noreq` is recommended to use for VFIO-USER
VM test cases now.
Change-Id: I8550d995795d923483877d9a81063f198a65d74a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We're not doing any type of "negative" testing here
so we don't expect "nvme disconnect" to fail in
these tests so that would be neccesary to mask it.
Change-Id: Id8ae8706d33f1db74f5e5da811bb542859b55c44
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Running 20sec workload multiple times in the test
takes some time. Reduce the run times to shorten
the execution.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4ecfa9d48f7ccaabb2a3707093da7662b5e5e807
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16214
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This should save a few seconds of execution time.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I96ade7da77ee9031fc20e7d93d3ab130b9d9be1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Use lightweight workload test cases in VM for the purpose
to keep number of dirty pages is in low rate of VM's total
memory.
Fix issue #2805.
Change-Id: I52efd0d0522ccef713ba2c3a451daac0683234dc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15954
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When an I/O gets an I/O error, the I/O path to which the I/O was
submitted may be still available. In this case, the I/O should be
retried to the same I/O path. However, a new I/O path was always
selected for an I/O retry.
For the active/passive policy, the same I/O path was selected naturally.
However, for the active/active policy, it was very likely that a
different I/O path was selected.
To use the same I/O path for an I/O retry, add a helper function
bdev_nvme_retry_io() into bdev_nvme_retry_ios() and replace
bdev_nvme_submit_request() by bdev_nvme_retry_io(). bdev_nvme_retry_io()
checks if nbdev_io->io_path is not NULL and is available. Then, call
_bdev_nvme_submit_request() if true, or call bdev_nvme_submit_request()
otherwise. For I/O path error, clear nbdev_io->io_path for
clarification. Add unit test to verify this change.
Linux kernel native NVMe multipath already takes this approach. Hence,
this change will be reasonable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7022aafd8b1cdd5830c4f743d64b080aa970cf8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change I/O retry to use the same io_path if
it is still available. However, bdev_nvme_submit_request() always calls
bdev_nvme_find_io_path() first. For I/O retry, if possible, we want to
skip calling bdev_nvme_find_io_path() and use nbdev_io->io_path instead.
To reuse the code as much as possible and not to touch the fast code
path, factor out request submit functions from
bdev_nvme_submit_request() into _bdev_nvme_submit_request().
While developing this patch, a bug/mismatch was found such that
bdev_io->internal.ch was different from ch of
bdev_nvme_submit_request(). Fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id003e033ecde218d1902bca5706c772edef5d5e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From Qemu 7.2 slirp submodule has been removed from the Qemu source tree
which affects "-net user" in vhost-vs-qemu tests
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I2ab69dc8eccafe3649bf1c67f8dd310585c50eaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
- Move "run_test" entries around so that target
and hosts tests are grouped
- Add missing timing start & exit directives for
target tests
- Further move tests around to group them by
matching SPDK_TEST_* flags
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If1decd49ffbf2d1fffac60e55b506002a2107d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16210
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF initiator in recent kernel versions takes
considerably less time than when the "sleep 4" was
introduced, as described in:
https://github.com/spdk/spdk/issues/2467
This effectively reverts:
dacd8ec827
Change-Id: Ib678d99c330c739788a5d6aaeabd23cb2c9017ef
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The new module replaces functionality in vbdev_crypto.
This module is bdev agnostic, so some inernal parts
were reworked.
io_channel: contains a qp of every configured DPDK PMD
crypto key: for mlx5_pci we register a key on each available
device since keys are bound to Protection Domain.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1845cb87eadacbb921c593ba82207a97f2209a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This patch is just a copy of vbdev_crypto.c and the
corresponding UT file. It makes it easier to review
the next patch which adds accel operations
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ib88b45d573b011b1acb35da9bf4dab922d8fb183
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16182
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
* generic metadata support for raid modules
* raid is not created when metadata formats for base bdevs differ
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Ifaf9cfc4f2472c3820da1070deda758c5334edb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Skip CentOS8 and Rocky8 as packages are
not available in default system repositories.
Change-Id: I4e957444aec1745872f5d6cc1cd9bdec792ac400
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
