1.nvmf: change the return type of calloc failed to -ENOMEM and
keep consistency in this file.
2.thread: revise rc condition to ( rc!= 0),to deal with
all abnormal return.
Change-Id: I7cccb548f30448eaa1bac1a5904c3edcad9c1208
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/431459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were previously doing lots of checks in debug mode
to verify the validity of this field. Now we understand
how it works, so these checks are never going to hit
and are just making the code harder to read.
Change-Id: Ic82d479ae34a8c7db06db62aee1cdf6e8bec126e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430866
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
When we thought we could do error recovery we differentiated between
inactive and erro states. However, that's not possible so collapse
them back into one.
Change-Id: I57622c400378f2d4c518efbc12fb52e665a9ba4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The specification states that opcode is not valid when the status
is not success. Instead, keep track of the operation type ourselves.
Change-Id: I60af4b35e761c46f5f296a61cedfca198836197f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Co-authored-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/430865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
After some lengthy discussions with the RDMA experts, the only
way forward on an RDMA qp error is to disconnect it. The initiator
can create a new qp if it wants to later on.
Remove all of the error recovery code and disconnect the qp
any time an error is encountered.
Change-Id: I11e1df5aaeb8592a47ca01529cfd6a069828bd7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Code movement only. No other changes.
Change-Id: I04cf179ecd57154172a9369926cbeaaa37e11a52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This event only occurs when using shared receive queues, which
the target does not currently support.
Change-Id: If155843610cf0e961b9783d4afd64b969b4316f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add debug log in set feature,
spdk_nvmf_ctrlr_set_features_volatile_write_cache
to indicate the volatile write cache is disabled or enabled
according to the conditon.
Change-Id: Idc0a7fb461e2bbf1371d4a3faf5d839c7370bb65
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/428953
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the case that the subsystem in the related poll group has
NULL IO channel assigned due to some problem like out of resource,
for example, the NVMe SSD hardware itself has limited number
of IO qpairs. The subsystems in the particular poll group
could have zero valid channels. In this case, the creation of
assoicated poll group will fail and when adding the new qpair
to the specified poll group, needs to have a check and pick the
available poll group.
Change-Id: Iedee2a6375e48eb7bf899cfb0542c565c7ebd231
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/423646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I875cc9d6a6bd1e9e9ac25ca9103a2070226ac236
Reviewed-on: https://review.gerrithub.io/428877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function doesn't return error code
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I67a8fa7393990470e509baa8934e78bc6f6a6c9e
Reviewed-on: https://review.gerrithub.io/429441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
fix a typo error in lib/nvmf/nvmf_fc.h
Change-Id: I740391efe58203d0d6f5240a081f61a3b7b82d74
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/429089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This value for the rdma transport at least is tied very closely to the
size of the iover buffers. Changing the name makes it less confusing.
Change-Id: I8a703f023c37f794323b7280228340aa587243fe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428746
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I90f68e9dbe00854f569f6574b9c89508f89caa43
Reviewed-on: https://review.gerrithub.io/428876
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This prevents the SPDK build from requirng unnecessary dependencies when
not compiling certain features. Also, fixes github issue #434
Change-Id: I7d0520474f3656ae32670313f2290e6b741c5ca8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a disconnect occurs before connect processing has completed,
delay handling the disconnect.
Change-Id: Ibf91d7dc1f389be452ac6be8948c51e5dd3b9614
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425990
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Connections to a subsystem may only originate on listeners
that have been explicitly allowed for the given subsystem.
Change-Id: Ib575a5803cc7af75c15d1a2c76b9866594e7a1db
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425024
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This function will now check for whether or not a memory region is
contiguous accross 2MB map entries and return the total length of that
contiguous buffer up to the size specified by the user.
Also includes unittests
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I2ce582427d451be5a317808d0825c770e12e9a69
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I90da6d4d31c669a3bf046f7721923dd743c5ef21
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the user does not specify a serial number, just set it
to all 0.
Change-Id: Ie1aaa4c1bf5f9eaf76fcc9ed6f6bd6ded2aeb200
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Avoid using the deprecated construct_nvmf_subsystem
when dumping configuration.
Change-Id: I908d87bdd77a8b2a8e54baeb7b73e8b52c4912ee
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A request could be completed twice, once for an error
on an IBV_SEND operation and again on an outstanding
IBV_RDMA_WRITE operation, if the RNIC goes offline
while a complete + data transfer are occurring.
This fixes GitHub issue #414
Change-Id: I2338b4d4582c5ee2512cfbd1e89048a10d3ecf1c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425646
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously there was only an assert if it failed to send
a response capsule. Now, release the resources associated
with the request (and leave the assert in). This is a
slight improvement. A full fix will likely involve
forcibly terminating the connection.
Change-Id: I62377078d0cb310042966a0eaca4c80c5f91f9f7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425633
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We were previously checking only if the version of libibverbs
was suitable for SEND_WITH_INVALIDATE. However, the NIC itself
also has to support it and that should be checked.
Change-Id: Ia43eb761343ce4dbe0496f3c929cfb889eb5815d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425631
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- Add independent functions to create transport with specific opts
and add to target while maintaining backward compatibility with
current apps and rpc configuration that still use the add listener
method to create a transport.
- Add new rpc function to create transport and add to target.
+ Update json reporting to include new rpc function.
+ Update python scripts to support new rpc function.
+ New nvmf test script (cr_trprt.sh) to test new rpc function.
Change-Id: I12d0a42e34c9edff757755f18a78b722d5e1523e
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/423590
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function now takes a pointer as it's last argument, and copies the
size of the memory region for which the translation is validinto that
pointer.
For now, that will always be 2MB. However that behavior can change in
the future.
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I8686c166ec956507f5ae55cf602341281482cb89
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This fixes#418
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I81516f0fc5720917fda24530613f8580582498ac
Reviewed-on: https://review.gerrithub.io/425254
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
If multiple notifications from ib events or cm events occur,
don't release the qpair resources until all of the events
have executed.
Change-Id: Id569acc051819b0c76602601a7aa9b50661d2fab
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The function returns the transport ID describing the
listen address on which the connection originated.
Change-Id: Ib11cddb8ff2ceb04a5f3ce236ba96c68b7226773
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425023
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The call seems to work out correctly without this, but
the man page is clear that this hint should be provided
if the service is a string containing a port number.
Change-Id: I9eb966cbe3ccf310836167a5a48ac1b6bd679430
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425184
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The port wasn't being converted from network to
host byte order.
Change-Id: I154349205ca09ceca932c44883ef3242acd87be3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425183
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This initiates an error recovery instead of a disconnect. The
error recovery may result in a disconnect if the qpair is not
recoverable. This also resolves an issue where the disconnect
may immediately release the resources associated with the rqpair,
but upcoming wc entries may still reference it.
Change-Id: I9d9e212a83129412e049c91c02725699ce2cac11
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425010
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that it is required to be on the same thread, the
message isn't necessary.
Change-Id: I714b77b46467dbcfa51186c8404c5976eaeea08a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424593
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I observed that spdk_nvmf_qpair_disconnect is only ever called
from the thread that owns the qpair - i.e. the one associated
with the poll group - with only one exception where the qpair
wasn't fully initialized. Add a check that enforces this
condition, as it will allow some major simplifications.
Change-Id: Ied434c9ea63fd4f2a6f9eacdf8f3f26a7b6bcf3f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424591
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was the only usage of spdk_nvmf_qpair_disconnect that
was not being called from the owning thread. Send a message
here so that spdk_nvmf_qpair_disconnect can be simplified
later.
Change-Id: Ic5fae4503a95f7183079a02544812a9fc5d4def5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424592
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
While here, clean up the trace application output based
on some debugging done with these tracepoints.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaf79f0ff8c80d0a6b9768ae0da213d57e98ec552
Reviewed-on: https://review.gerrithub.io/424286
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia728b4334a4f6abacdd94eecc45e27697e29522a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to filter tracepoints based on
the connection that generated them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3570c6613e477f4e14a85266b7e01f0fcb77f5db
Reviewed-on: https://review.gerrithub.io/424280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This no longer requires special handling - the event can be
acknowledged like all of the others.
Change-Id: Ib30cf35ec7aff45734ca6fe729e15d8fe41e3838
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Keep the code together. This is only code movement.
Change-Id: Ie52f1ab09e197192025f2b664df410ba6e1f06aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, this would release resources for requests if there
was an RDMA error on the qpair. Expand this case to include
scenarios where the qpair is in the process of intentionally
shutting down.
Change-Id: Ib018f190389ee2df20eba3dddcc7dcffdbb4909d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This guarantees that the qpair memory still exists.
Change-Id: I759197b90513f30488aa46bd26535c663e64dae6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423744
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't abort commands in states indicating an RDMA operation
is outstanding until an event indicates that all of the
work items have completed.
Change-Id: Ie2b83604bee142e383ffbcae088f4da0fd0fa658
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423413
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Due to polling order, a request may have completed its previous
operation successfully, but the queue pair may be in an error
state. In this case, move the request directly to the
completed state to release resources.
Change-Id: Ic0a5ba036af246b1b6155169cf9682e943b73120
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423412
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
thread
In debug mode this will verify that the state is being set
from the correct thread only.
Change-Id: I6234299d1fcdb63cd047417b6255c91e29991242
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423411
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an RDMA operation fails, initiate a queue pair disconnect.
Make sure all of the resources are released appropriately.
Change-Id: I8857ffc17b170279c7d30eb939fbe47da7bcdf5a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This call results in a syscall that should be avoided. We
can often use our cached value instead.
Change-Id: I11b5c5457ac2f68bfd46877d3bbc077a50dc9acb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Move most of the target opts from nvmf_tgt to nvmf_transport.
- Update transport create functions to pass in transport opts.
- When transport opts are NULL in transport create function, use
target opts. (for backward compatiblity)
- Part 1 of 2 patches. Part 2 (to follow after part 1 accepted)
will allow independent creation of transport with specific opts
while maintaining backward compatibility with current apps and
rpc configuration that still use the add listener method to
create a transport.
Change-Id: I0e27447c4a98e0b6a6c590541404b4e4be879b47
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/423329
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qp_context is only available for QP related events.
For other events we should not update ibv state as we try
to access null object data field.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id8d2fee090d9a40c7e00c866914c2eb164e7587c
Reviewed-on: https://review.gerrithub.io/422941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the case of failing to spdk_nvmf_poll_group_add_subsystem()
operation, the subsystem still needs to initialize the related
queue so that later coming request can be properly queued.
Also needs to correctly handle the expected state in this failed
condition so that when destroying the subsystem, it could be
properly handled.
Change-Id: I419f2ac7164c25258c3911952c38b9433fca762b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/422799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Instead of waiting until the first listen address is added,
create a protection domain and a memory map for every RDMA
device in the system. This consumes more resources when there
are RDMA devices that aren't used by the target, but it
will simplify some order of operations issues when listen
addresses and poll groups are added and removed at run
time.
Change-Id: Idfe6f8307decbf19e02765dbf67f03c2510a328f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/422602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to nvmf bdev.
Change-Id: I5b915abcccec930c3eb684d95bc64482e7887af5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the RXE kernel driver does not support send with invalidate.
There is a change to the kernel making its way downstream that will
enable this feature. At that point, we can conditionally enable
send-with-invalidate based on the kernel version.
Change-Id: I05c7bcbf8ec944be89c10bdf6ccc3229e4586914
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/422579
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
some vendorse support less send sge then SPDK_NVMF_MAX_SGL_ENTRIES.
Change-Id: I5b550b537b6ff4ae5d7876a3f277f88cf06049e4
Signed-off-by: Leonid Ravich <Leonid.Ravich@dell.com>
Reviewed-on: https://review.gerrithub.io/421012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The admin queue pair may get disconnected before
the controller is entirely destroyed and can't
be relied on to obtain the correct thread.
Change-Id: I5e80ef286693d53a161134610dd8354c458f8390
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/422134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: qun wan <qun.wan@intel.com>
In RDMA, qpairs can't be removed from poll groups because
the poll group defines the completion queue. So don't
allow this operation anymore, even if it were theoretically
possible on other transports.
Change-Id: I69a3d1b336decd2d25e43ddea94f8b2095ef662f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In the case that NVMe SSD itself has limited number of
hardware I/O QPairs, the corresponding abstraction of
I/O channel where upper module used to send I/Os down
will be NULL.
Add a check here for the NVMe-oF module and return the
error if the related I/O channel is NULL.
Change-Id: I97b799c6ecb026a01b0a414f1b49b949aa2407fd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416689
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After some other refactoring, we can now efficiently handle
IBV_EVENT_SQ_DRAINED events during error cases again, so do that.
Change-Id: Iba9ec59d9e6b72d8a6d8c7b74f3c3c532114a0a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421045
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvmf_rdma_qpair_recover
Also clean up some print statements
Change-Id: I67cfc9ea560298a310b1216d4542a981c0f1e8f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420938
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Decide which action to take based on a combination of the
nvmf qpair state and the RDMA qpair state.
Change-Id: I338ace9dd66dd8dcf81aa30e51758aa81768d7f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421162
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Claim the block device when adding it to a new Namespace,
and prevent the block device to be added twice for other
modules and Namespaces. Also remove the test that using
same block device over different Namespaces.
Fix issue #371.
Change-Id: Ib7ce18e9fde4a15c0f19ce9e28e69145e54570e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/420472
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No longer send an event to process the pending queue -
just do it inline.
Change-Id: I32716c9ecac3791de297c2a48529c15d220dbe6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
recover was only called by drained, and they're relatively small
Change-Id: I65002cfe13d0045a37609be5b85be087402b4a65
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421043
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There is no need to keep attempting to abort all requests later on,
there won't be any in these other states.
Change-Id: I7b12e10b87e0d0bb4a74fdf67fb278b443e70e8a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The state of the RDMA qpair is not entirely initialized (RTS)
until after the CM event is accepted. Delay caching the state
until then.
Change-Id: I39befb867fc6a01e94d7fc176071aaabb906bd07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
IBV_EVENT_SQ_DRAINED can occur during both error recovery and
normal operation. We don't want to spend time sending a message
to the correct qpair thread and then attempting to abort
all I/O in the case where this wasn't triggered by an error.
The case where this occurs during an error is very rare and
only in response to a user forcing the state to err from the
sqd state. For now, don't handle that case at all. Handle that
corner case in a later patch.
Change-Id: I16462ca52739b68f6b52a963f7344e12f7f48a55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This was the only call point of two very small static functions,
so merge them into the main body.
Change-Id: Ifdd3355ffd500ac5ad4fcf69feace65b35132906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420935
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The update call was never used independently of the get
call, so combine them
Change-Id: Ibae622e5fd23203e79ceeae1aeccc5c7d9d1ebc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420934
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
We should not use mutex, but use the spdk_send_msg policy,
then we can let only one thread to handle that and
eliminates the segement fault issue.
Now in the code, the qpair_mask is handled by the same
thread, e.g., the thread which owns the admin qpair of
the ctrlr.
Change-Id: I609fd4d49f5ecc85bc47bf9c23afbb507900be7c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Asking which thread we're currently on is more expensive
than sending a message.
Change-Id: I9d9007c9f7f30e4cdd9a97de6bf7a10b0e2a0594
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420933
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With the reordering of the nvmf_tgt states, we need to remove any
connections accepted during the shutdown pahse of the target.
Change-Id: I768484366da8273df74b8d52a3e8de6158b6995f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, qpair deletion was synchronous and handled by the
io_channel_destroy_cb for the target. However, with the new asynchronous
qpair deletion api, these qpairs need to be completely removed before we
free the i/o channel and the poll group.
Change-Id: I42c62391df62825d53e158306c4372523403ad27
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The poll group pause, resume, remove, and add functions are only called
from the subsystem_state_change_on_pg function. Previously, they would
return immediately and the state change would move on to the next
channel. However, some of these functions (specifically remove) kick off
asynchronous APIs and we should not iterate past them until those
asynchronous operations complete.
Change-Id: I78804273b39f2d171ba26ac4478ad515356833f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419289
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is necessary to avoid race conditions when freeing subsystems.
Change-Id: I9b4a7d006cc42cd29e13179e940ced0cc580f548
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This ensures that when we continue to iterate through channels after
deleting the qpair, we will be able to continue iterating through
channels.
Change-Id: I6fba43dc14a3e5e8faac78f8b37e9e0c6aad2687
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is necessary to free the AER without sending a completion to ensure
that the host does not attempt to send an additional AER upon receiving
the first completion.
Change-Id: I2b3f8f286d6396019d8ace97d2376547705b8d9d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA QP is attempted to recover after IBV_EVENT_QP_FATAL event
is received from IBV asynchronous event API.
RDMA QP is put into ERROR state and is not processing any inbound
requests. The outstanding requests are only allowed to COMPLETED
and FREE states, no outbound transfers are performed.
IBV_EVENT_QP_LAST_WQE_REACHED or IBV_EVENT_SQ_DRAINED event is
expected to follow IBV_EVENT_QP_FATAL, giving a go to draining of
all outstanding requests and freeing the associated resources.
The requests executed by block layer are gracefully allowed to
complete, but no outbound transfers are made.
Note, outstanding requests can not be reliably completed through
polling the CQ, as WC's with failure status might not have all
the fields valid. The failed WC's are dropped and the outstanding
requests are fetched from the appropriate state's linked list.
QP recovery is triggered when there is no more outstanding requests.
If QP recovery is completed succesfully, the RDMA QP is put back into
ACTIVE state, the QP disconnect is triggered otherwise.
Change-Id: I45ee7feea067f80ccc6402518990014d691fbda3
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416879
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It appears that we can get caught in a loop when shutting down a
subsystem if there is a qpair that has been moved to the deactivating
state due to the target shutting down early. These qpairs don't have a
state cb and won't ever be destroyed or removed from the global list.
Change-Id: I4f9ed774a94e0e2c7ff7bfa3af1776b38a787035
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419269
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Requests that are being put into IBV context are lost when
IBV QP breaks and its SQ drains.
In order to track NVMf/RDMA requests, RDMA QP has been
reworked to track requests at any state with queues of
requests for each state.
This allowed to get rid of a few intermediate queues and
request counters.
A couple of states has been added to track outbound requests
with and without data. They will be used by QP recovery for
freeing resources assigned to outstanding requests.
Change-Id: Ie84207325c38e5bb2c247cd6dcddb82dfad0d503
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed unneeded (and too generic) #define errors.
Change-Id: I26343504aaefb7e982d4dca35ffade8c70406f08
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/418881
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Most of the error paths in this function leaked resources. Make them
all use spdk_nvmf_rdma_destroy() so all resources are consistently
freed.
The spdk_io_device_register() call is moved to the top of the function
so that the io_device is always valid when calling the destroy function.
Change-Id: Ic92f09f157ee8245fb962d8bc3330aadd87b294a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418869
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
rdma_get_devices() may return NULL on failure; we need to check for this
before dereferencing the returned pointer.
Fixes GitHub issue #360.
Change-Id: I9628e5865365d256f4b1887bf07ce8737b55d356
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
New header file for NVMF FC transport defining FC data, functions
and low level FC driver interface.
Change-Id: I3fd24e93cefa06647003eeb27d79166469fb4a05
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/415057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I59f4f69ed695cc9a2b6d0b87052fdf50004ee1c7
Signed-off-by: Senthil Kumar V <senthil.kumar.veluswamy@wdc.com>
Reviewed-on: https://review.gerrithub.io/418170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I54793624e46a4e51b0c989ddfe933ccb5f035123
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/417858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qpair_disconnect has previously presented an entirely synchronous API.
However, it relies on other asynchronous operations to complete its
task. By giving it an asynchronous API, we can avoid possible race
conditions. Patch 1 of several.
Change-Id: If9e26ee70ae5d6c0273750226b4408a8e4587e19
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
