We stopped the poller to early, so we were not able to
reap all completions on ibv CQ, so RDMA qpair was not freed.
This patch stops the poller when all references to poll group
are released (all qpairs are destroyed)
Fixes#1578
Change-Id: I15c1697db13aef9da7567c7312476306c3ee1d62
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3962
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When tested on Linux 5.8 kernel and configure spdk
with debug mode (--enable-debug), and test SPDK NVMe-oF
tcp transport, and we see the coredump in sock_map_release
with the following statements:
assert(entry->ref > 0);
After debug, I can confirm that the placement_id value got
from the following function (sock->net_impl->get_placement_id)
changes.
It means that: When the sock is added into the poll group
(spdk_sock_group_add_sock), we get the placement_id (named as
Value(begin)); and when the sock is removed from the poll group
(spdk_sock_group_remove_sock), we get the plaemednt_id on
the same sock (named as Vaule(end)). I found that
Value(begin) ! = Value(end).
So our solution is for a socket, we will get placement_id once,
then we can solve this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia1d0cf39247b53410260561aca5af38130cc0abb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3983
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will use it earlier in this file in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I554f2073185d466bd0b4e98bdeec721f763c1b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When claiming clusters as part of blobstore initialization
or recovery, just call spdk_bit_array_set directly rather
than going through the bs_claim_cluster function. We will
be modifying how runtime cluster allocation works so need
to separate the two use cases. This code is very small so
inlining it has minimal code impact.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaaa1c817e57b4a2eea62eb4683407364bac1fcc0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3966
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These functions were added during FTL development and
are more efficient than the roll-your-own implementations
blobstore had previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie09e5c305e6e171af0258e805f2aac3b88822b5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3965
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow toggling log timestamps on and off by adding new RPC call.
Change-Id: I34c84bf89fae352ade266fbf7fd20594ff67bced
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2024
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove assert and add exit codes instead. That in non-debug mode, these
could lead coredump. We don't want the vhost target be crashed after
recieved invalid commands.
fixes issue: #1575
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ifef6d8f9c32150213bc2c80787e92d428d4c49c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3951
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
cpumask can be changed by spdk_thread_set_cpumask()
during the time that event takes before it arrives
on _schedule_thread() function, which would make the
function assert(false), even though that is ~ok~.
Currently, that can happen right after thread is created
or between two successive calls to spdk_thread_set_cpumask().
But most importantly, it will constantly happen if we
introduce rescheduler.
This patch just disables the check for now.
Change-Id: Ie6dfe22d6eff2c908c367d1311436cc6769a6960
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3905
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the PDU receive handler processes the header of the logout request PDU,
conn->is_logged_out is set to true.
However, if conn->is_logged_out is true, conn->pdu_recv_state is set to ERROR
before the PDU receive handler completes processing the logout request PDU.
Then if conn->pdu_recv_state is ERROR, conn->state is set to EXITING
after returning from the PDU receive handler.
Response PDUs are sent asynchronously now and may not be sent even after
returning from the PDU receive handler.
On the other hand, outside the PDU receive handler, the current connection
is closed if conn->state is EXITING.
Hence logout response PDU may not be sent to the initiator.
For the case that the initiator logs out and then reconnects when receiving
asynchronous logout request, missing logout response is critical
because initiator waits until receiving logout request and gets timeout.
This patch moves the check if PDU comes after logout to the place
just after getting a PDU header.
At the new location, data segment of the PDU is not received yet. But
logout request PDU does not have data segment and initiator will not
send additional PDU after sending logout request PDU, and by this patch,
iSCSI target will continue to stop receiving any new PDU after processing
logout request. Furthermore, even if there is any remaining data in the
kernel buffer, the kernel will discard or flush it when closing the socket.
Fixes issue #1571
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9554f4d54f3db80bf86abd6bffe81bac8c234531
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3928
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
ANA transition time shall be non-zero if controller supports ANA
reporting. Linux NVMe host sets this value to 10, and we don't
have any reason to change from that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61396695dacf47fad40e3cea3311e555729d9e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3909
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Registration macro now generates function based on driver's name.
It allows to have multiple registration within single source file.
Similar pattern is used e.g. by SPDK_NVMF_TRANSPORT_REGISTER.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ied0887e8dae7fe9ca1517313be5eff8f218b7e98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used in another place later.
This patch is part of a series aimed at improving recovery
when we are fail to change the subsystem state.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24bfbeb3d006584003164540d6ede540dbcafa86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3392
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
The loop here was counting the bytes in the cpus array,
but the lcores are represented by bits.
While here, add a unit test that exposes this bug and
demonstrates it is now fixed with this patch.
Fixes#1570.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a1fc48a8085254f41587e3b3d5d732154b90134
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3931
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow applications to understand why
they were unable to connect.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic04c7e72098c6ec1823de7d6a07d90150ef5ac20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3836
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a bdev_examine_allowlist_free function, which releases the members
in g_bdev_examine_allowlist. Invoke it in bdev_mgr_unregister_cb.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I47faf6959066da6679716b2f2abfab8ac8b8dd79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently when the uevent processing code finds a non-uio/vfio
uevent, it just stops its loops and returns. This means that if
there are a lot of non-uio/vfio uevents, the netlink socket buffer
can build up until its full because only one non-uio/vfio event
gets drained per spdk_nvme_probe() call (which may be very
infrequently).
So modify parse_event so that it does not indicate error when
a non-uio/vfio event is found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8a40f71ee89d597ce46129eac889fe5b7ef5171
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3876
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This ensures we don't send a nopin immediately after
a connection is established, in case the nopin poller
fires before the connection reaches full feature phase.
Fixes#1441.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieba9476bec0e9b7f85e60b9113ae8364eda5bda3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3902
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The md_page alignment is not really required for md_page
buffers.
Allocating 4k aligned buffers all the time, causes memory
to be heavily fragmented. Due to DPDK keeping track of the
allocation in the same DMA region as the allocation themselves.
Removing this alignment requirement will help DPDK when searching
for the right part of memory in the heap.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reported-by: Mike Cui
Change-Id: If2f4ca2be38d432d5740f6145b5e0ff46237806b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3853
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should make nvme_tcp_ctrlr_connect_qpair always return
negative value if this function fails.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I457e704e39d7a3acd298fd48e89e8ea51e2ed4ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3809
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The specification says it will return INVALID FIELD if the NS
is in inactive state.
Fix issue #1551.
Change-Id: I1b32f023ed665d410f4705e439068699e2b2f8de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3860
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Failed qpair will be destroyed on generic nvmf layer during handling
of error code returned from spdk_nvmf_poll_group_add.
The current approach leads to heap-use-after-free.
Change-Id: I99331150fa36a3c3c18176589afb973dee449b3a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3538
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The one large global mempool was a waste of memory for apps that
don't use the accel framework as its always allocated a pool sized
to handle a heavy load with multiple threads.
Instead move to a per channel list of just 1024 tasks greatly
decreasing the memory footprint but still able to scale as more
threads are added.
Also renamed all accel_req to acccel_taak and simply task to
accel_task as this was being touched anyways and not consistent.
fixes issue #1510
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0e93ca6270323e2df4b739711c5d9b667a52e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3740
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently rdma acceptor handles only one ibv event per poll
Taking into account the default acceptor poll rate (10ms), it can
take a long time to handle e.g. LAST_WQE_REACHED events when we
close huge amount of qpairs at the same time.
This patch allows to handle up to 32 ibv events per acceptor poll.
Change-Id: Ic2884dfc5b54c6aec0655aaa547b491a9934a386
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3821
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is an oversight that can cause issues with looping
through the list if we end up allocating the same qpair
twice.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I513ea35398f4b724366c21be144531fbfbdb4347
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3835
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only create one spdk_blob object for a given blob, and just
increase the ref_count if it is opened multiple times. bs_open_blob
would do the lookup for existing opened blobs.
But if the blob is opened again, before the previous open operation
has completed, we would end up with two spdk_blob objects for the same
blob.
Solution is to do another lookup when the open operation completes.
If we find the blob, free the one we just finished opening and return
the existing one instead.
Also added unit test that failed on the existing code but passes now
with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reported-by: Mike Cui
Change-Id: I00c3a913b413deddf06f0b63f7a669efb2b5658f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3855
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
pctrlr->cmb.mem_register_addr and pctrlr->cmb.mem_register_size
are assigned after spdk_mem_register.
if spdk_mem_register is failed , ctrlr_map_cmb hasn't been executed.
they are not be used.
So remove them.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3d1996eee8b5260b79c4c3e0a2e1d376da2343b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3856
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK poller uses microsecond as the input parameter, so we need to
change the correct value when opts.association_timeout is expressed
by millisecond.
Change-Id: Ia674f0115ea176b998e4c0c70b8ce75b28984701
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3861
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After supporting ANA reporting by default, Linux kernel 5.3 reported
error when parsing NVMe ANA log. The newer kernel fixed the issue
but we should optionalize ANA reporting feature to avoid error for
Linux kernel 5.3 or before.
Add a bool variable ana_reporting to struct spdk_nvmf_subsystem
and disable ANA reporting and initialization of related variables
if it is false. We can expose MNAN (Maximum Number of Allowed
Namespaces) even if ANA reporting is disabled. But MNAN is not
required if ANA reporting is disabled. So do not set MNAN if it is
false too.
Add a public API spdk_nvmf_subsystem_set_ana_reporting() to set
ana_reporting by the nvmf_create_subssytem RPC.
The next patch will add ana_reporting to nvmf_create_subsystem RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc77773b4c9513daba2f1a9fdaf951d80574f379
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC, nvmf_subsystem_get_controllers to retrieve the list
of NVMe-oF controllers of an NVMe-oF subsystem.
One of the main use cases will be to get identification information
of NVMe-oF controllers to configure their ANA states dynamically.
Pause and resume the subsystem to access the controllers safely.
One subtle issue remains. The JSON RPC returns success even if
resuming the subsystem fails. Write FIXME explicitly to address this.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf8d1cf56850a705e343b86022d101b4c7204199
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3848
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A subsystem RPC is not transitioned to a paused state when there
are ios outstanding (tracked by subsystem poll group).
In general AERs, are not tracked as outstanding IOs. However,
there are 3 paths in nvmf_ctrlr_async_event_request which do not
adjust the outstanding io count.
If we get into any of these 3 paths, the subsystem pause can hang
forever.
The issue was reproduced with hot plug stress testing under load.
We can get into the second path (SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE)
under these circumstances:
- An AER completion is sent to the initiator due to a namespace change
(e.g. hot remove/add)
- In this case, type is set to SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE
- The initiator sends a new AER admin command, hitting the second path
where we return without adjusting the outstanding ios.
Fixes: 1552
Change-Id: I45f781966cc1e9a601b2305c7985a21154d802e8
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3854
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is a fatal bug that could easily cause data corruption when using
thin-provisioned blobs. In blob_request_submit_rw_iov(), we first get
lba by calling blob_calculate_lba_and_lba_count(),
blob_calculate_lba_and_lba_count() calculates different lbas according to
the return of bs_io_unit_is_allocated(). Later, we call bs_io_unit_is_allocated()
again to judge whether the specific cluster is allocated, the problem is it may
have be allocated here while not be allocated when calling blob_calculate_lba_and_lba_count()
before. To ensure the correctness of lba, we can do lba recalculation when
bs_io_unit_is_allocated() returns true, or make
blob_calculate_lba_and_lba_count() return the result of
bs_io_unit_is_allocated(), use the second solution in this patch.
By configuring more than one cpu core, md thread will run in a separate
SPDK thread, this data corruption scenario could be easily reproduced
by running fio verify in VMs using thin-provisioned Lvols as block
devices.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I099865ff291ea42d5d49b693cc53f64b60881684
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
According to page35 in recent NVMe-oF spec (
NVMe-over-Fabrics-1.1-2019.10.22-Ratified), ioccsz is used
to restrict the incapsule size of I/O command, so do not
restrict the NVMe-oF OPC command and also the admin command.
We accidently trigger an bug in kernel since we do not send
the fabrics command with the incapsule and make the kernel
coredump, though the kernel has bugs.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I869a2c8ab7b9c2ac1e5cc5b603920662591c2c64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3837
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The bdev_examine_bdev api will examine a bdev explicitly. After
disabling the auto_examine feature, a user could call
bdev_examine_bdev to examine a specific bdev he/she wants.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ifbbfb6f667287669ddf6175b8208efee39762933
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3219
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the transport is broken, we should set errno code in
spdk_nvme_ctrlr_process_admin_completions instead of keeping silence.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie73763e1329e12a8c82a0223d360991f86c39be3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3773
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows for much more granular control over the timeout.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib23de21e60eec4207c55320579699edf284f4e16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3794
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Generally, this patch did the following work:
Remove the destruct poller. I think that we do not need this,
the destruct poller is specially for Softwaare RoCE case.
Since SoftRoCE will not have IBV_EVENT_QP_LAST_WQE_REACHED event,
we will not wait the last_wqe_reached flag when srq is enabled.
So we can avoid using the poller.
And the purpose of this patch is to solve the coredump issue.
For example, if we run rdma local test such as, e.g.,
test/nvmf/host/bdevperf.sh --transport=rdma
The coredump reason: the qpair is freed twice. Because for RDMA transport,
we do not really remove the qpair from the group if the upper layer
does it.
The first time is called by nvmf_rdma_destroy_drained_qpair in nvmf_rdma_poller_poll,
and the second time is called by nvmf_rdma_qpair_reject_connection in
in nvme_rdma_close_qpair. Since nvme_rdma_close_qpair will always called,
so we need make sure that the qpair will be close after calling this function.
Otherwise we will have the double free qpair. So our approach here is add a flag
("to_close")in rqpair structure and make sure the rqpair be freed after the
"to_close" is set nvme_rdma_close_qpair
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6f97debbcd29bbb7c6e3f9725907b4102a1d2892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3661
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Add MaxR2TPerConnection to iSCSI global options and make it configurable
by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ida95e5c7dac301a22520656709e1aa4d611f31ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3777
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the recent refactoring, we have no static size array for outstanding
R2Ts per connection. It looks that we do not have any critical reason
to prohibit us from making max outstanding R2Ts per connection configurable.
There are some use cases to use large write I/O intensively (e.g. 128KB).
Let such use cases change the value of max R2Ts per connection by their
responsibility to do performance tuning.
Maximum outstanding R2Ts per task are defined both for iSCSI target
and NVMe-TCP target but maximum outstanding R2Ts per connection is
unique for iSCSI target.
The next patch will add the corresponding iSCSI option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f6fd3c750a9a0a99bcf23064fe43a3389829aa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is likely that the raw number 8 in the macro NUM_PDU_PER_CONNECTION
means 2 * DEFAULT_MAXR2T and the raw number 2 means R2T and Data Out, but
is not certain.
On the other hand, the next patch will make the max number of outstanding
R2Ts per connection configurable.
As a preparation to the next patch, add 2 * DEFAULT_MAXR2T explicitly
to the macro NUM_PDU_PER_CONNECTION.
The next patch will replace DEFAULT_MAXR2T by an new variable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a3be14d53c0abf11d7aade401386601d8fe6c11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Other count variables in iSCSI library have used uint32_t rather
than int.
Change the type of spdk_iscsi_conn::pending_r2t from int to uint32_t
and add assert to check if pending_r2t is not negative.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bd296c0142b0808ae822952277c9ecc133e5f62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add MaxLargeDataInPerConnection to iSCSI global options and make
it configurable by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcd16da2eac64241217bedeb89a7929bbdc67871
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3756
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For some use case that there is heavy large read I/O, the performance
bottleneck due to MAX_LARGE_DATAIN_PER_CONNECTION was reported.
The following assumes that all I/Os are large read.
Large read primary task whose I/O size is more than
SPDK_BDEV_LARGE_BUF_MAX_SIZE (=64KB) is split into multiple
read subtasks.
spdk_iscsi_globals::MaxQueueDepth limits maximum number of outstanding
read primary tasks, and MAX_LARGE_DATAIN_PER_CONNECTION (=64)
limits maximum number of outstanding read subtasks.
MAX_LARGE_DATAIN_PER_CONNECTION is also used to calculate PDU pool.
To remove the performance bottleneck, change the macro constant
MAX_LARGE_DATAIN_PER_CONNECTION to a global variable
spdk_iscsi_globals::MaxLargeDataInPerConnection.
We don't see any negative side effect if we set
spdk_iscsi_globals::MaxLargeDataInPerConnection to 64.
The use case that reported the performance issue will change the
value of spdk_iscsi_globals::MaxLargeDataInPerConnection by its own
responsibility.
The next patch will add the value of
spdk_iscsi_globals::MaxLargeDataInPerConnection to iSCSI options,
and make it configurable by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc30cdb8e00d50f4d3755ff399263cf5d0b681b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Helps us avoid adding a new I/O qpair while the ctrlr
is being destroyed.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3bf9318b075125b9d432b885fa9f6f2f44d422d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3686
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For the login redirection feature, the current implementation works
only if a portal is redirected from an initial portal to a redirect
portal. However, the login redirection feature should work even if a
portal is redirected from one redirect portal to another redirect
portal.
A public portal group knows only a redirect portal and does not know
the portal group of the redirect portal.
Moreover, it is very likely that an initial portal and a redirect portal
exist in different SPDK iSCSI target applications.
To cover all these concerns, add an new iscsi_target_node_request_logout
RPC to request connections whose portal group tag match for the target
node.
To cover potential use cases, make the second parameter portal group
tag optional.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I612672490722fb22fd4eba055998b7408ab84ca5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As written in doc/iscsi.md, typically the login redirection feature
will be used in scale out iSCSI target system, which runs multiple
SPDK iSCSI target applications.
In scale out iSCSI target system, the initial portal, the current
redirect portal, and the next redirect portal are likely to be in
different SPDK iSCSI target applications.
In this case, asynchronous logout request should be sent independently
from the iSCSI target application which has the current redirect portal.
However, we had added asynchronous logout request into the iSCSI target
application which has the next redirect portal. This idea works only
for the case that login is redirected from the initial portal to a
redirect portal.
We remove asynchronous logout request from iscsi_target_node_redirect()
in this patch, and update the corresponding help documents.
The next patch will add an new RPC to send asynchronous logout
request to all connections to the specified portal group and the
specified target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib0ac72e8cdad7e8c64e446b7495e572fac4b5bae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3779
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This data structure is not used.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I143fb9256f692d7bd9bb5e14cdc479f64ddcef45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3746
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1. Retrieve actual IBV state when we receive WC with bad status
2. Don't log an error if WC status is IBV_WC_WR_FLUSH_ERR. This
means that we are performing qpair cleanup and this WC is expected.
Change-Id: Id23634092f537861e66ca0f83ab79db9e052507b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3736
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From the time a shutdown is initiated the controller shall disable
Keep Alive timer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Id499dabce1913b9da2f0b3fd961fdfc8b621afa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3462
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
After CC.EN transitions to ‘0’ (due to shutdown or reset), the
association between the host and controller shall be preserved for at
least 2 minutes. After this time, the association may be removed if
the controller has not been re-enabled.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I4734600067fd4b7306b46f1325fdd5031e81c079
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2984
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This call can be made directly now that
spdk_nvmf_qpair_disconnect is thread safe. It's
actually better that we do it this way, because
the qp destruct call is guaranteed to block until
the ib events associated with it are acknowledged.
this means that by processing the disconnect before
we ack the event, we will have valid memory to do
the atomic checks.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If6882b7dc568fe4c35f4a35375769634326e9d76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3681
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We should use this function as the synchronization point
for all qpair disconnects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic685ac3481765190cc56eeec3ee24dad52e336c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3675
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function should be the synchronization point for all
disconnects regardless of whether they begin on the transport,
from an RPC, or in response to application termination.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If3553ab3a9e265b0938c84832cb9f774852d7565
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3674
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe-oF controller creates a ANA group for each namespace,
ANA group ID matches namespace ID, and default ANA state of ANA group
is optimized, and the MNAN field is set equal to the NN field.
If a ANA log page contains multiple ANA group descriptors, it has
one or more descriptors will not be 8 bytes aligned. Hence we create
one descriptor and copy it to the ANA log page at a time.
Change count will be supported later.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ba6aa78983480caa3dfbf22aefc9aeabfd5405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FTL core poller should return SPDK_POLLER_BUSY flag only
when some writes operations were processed.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I50e2b536fbec819887148cc045d76c5c5d78beb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are 2 messages passed between when
_nvmf_ctrlr_free_from_qpair is executed and when
nvmf_ctrlr_destruct is executed. That leaves time
when the controller->qpair_mask is not a valid
pointer, but it is still in the subsystem
controllers list.
The purpose of this patch is to close that hole.
It is part of a larger series aimed at cleaning up
the controller destruct path.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c0199c8392ee278f36df56f599beb10e7a46948
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3685
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This API differs from spdk_nvmf_tranpsort_stop_listen in
that it also disconnects the qpairs associated with
that listener.
Change-Id: Iadfc6d2debc0ef8f1a8cd5db4f20168aeae8264d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3279
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the portal group map of the target has a redirect portal,
iscsi_tgt_node_is_moved() fills the buffer by the redirected address
and returns true.
iscsi_op_login_check_target() calls iscsi_tgt_node_is_redirected() before
calling iscsi_tgt_node_access() because login redirection can be
checked before any or after all security check.
If iscsi_tgt_node_is_redirected() returns true, notify login redirection
to the corresponding initiator.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4573a69c0a32eafcfe48080a033c135e127da321
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iscsi_tgt_node_redirect() updates redirect portal of the initial
portal iin a primary portal group for the target node.
Check if the specified portal group is a public portal group and is
mapped to the target node first.
Then if the passed IP address-port pair is NULL, clear the current
redirect setting. Public portal group and private portal group are
clearly separated and redirect portal must be chosen from a private
portal group. Hence this clear method is intuitive and simple.
If the passed IP address-port pair is not NULL, check if they are
valid, and are not in the specified portal group. Then update a
redirect portal of the portal group map.
Finally, send asynchronous logout request to all corresponding
initiators.
Besides, change allocating pg_map from malloc to calloc to initialize
redirect portal.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79d826663f4c3d5a117add286f133adeb1ce07f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3222
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All redirect portals in private portal groups are temporary and so they
should be informed only by temporary login redirection response.
Then this patch changes SendTargets operation to return portals only
in primary portal groups.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic62ada749886290df2d1490377cc5ca883b3f47a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3492
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK iSCSI target, portal group works almost as identifier of
portal.
To support iSCSI login redirection, we need to have two types of
portal groups, public and private portal groups.
We need portals of public portal groups to redirect to a portal in
a private portal groups at login via temporary login redirection
funciton, and we need to make SendTargets return only portals in
public portal groups.
To do these simply, we mark primary or secondary portal group expicitly
at its creation by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iccf87a4b9dd1f4a8fbb857a399b8f2dbc7c0b3ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3491
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a helper function iscsi_parse_redirect_addr() to validate the
passed IP address-port pair.
iSCSI login redirection will support only numeric IP address and
TCP port, and add AI_NUMERICSERV and AI_NUMERICHOST.
This function is almost same as nvme_tcp_parse_addr() and
nvme_rdma_parse_addr().
Besides, update error log in posix_sock_create() to use
gai_strerror(). gai_strerror() will provide more accurate
information as done by nvme_tcp_parse_addr() and nvme_rdma_parse_addr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65c6de81a64dcb26551ce796172d0458e1c298a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3357
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patch was merged while still having parent one
pointing before SPDK 20.07 release.
(61cd9d) lib/sock: Add option to enable or disable quick ACK
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1cbc0acfdd2a1a5403844167a107e0f63a2e213c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3709
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI login redirect will change SendTargets. To make the change
easier, factor out sending target portals from iscsi_send_tgts
into iscsi_send_tgt_portals() even if iscsi_send_tgt_portals() is
used only once.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic565421afc9b099a507aac59ef7c741b113efa8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3443
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we might have any possibility to need iaddr in
iscsi_send_tgts(), but it is highly unlikely now. Let's remove
the param iaddr from iscsi_send_tgts().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide3405706b727a9d6ebaa92ed83509196ff675da
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3442
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The upcoming new feature, iSCSI login redirection will requests
connections whose portal group tag matches to logout asynchronously.
Hence add pg_tag to the second parameter of iscsi_conns_request_logout()
and iscsi_conns_request_logout() checks if conn->pg_tag is equal to
the passed pg_tag.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaea37f28046396404c5b4faed01d748f2944288c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3160
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously we might have any possibility to need conn in
iscsi_append_text(), but it is highly unlikely now. Let's remove
the param conn from iscsi_append_text(). This patch includes a
minor simplification not to use rc but return directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa009c1374e878f8d3b9c0043ba0352f59010b59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3157
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Dynamically allocated string is not necessary, and use fixed size
char array for simplification instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iada118fbc81f24d0273269f4980bab28bd9c2c23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3161
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously iscsi_del_transfer_task() and iscsi_clear_all_transfer_task()
were called after SCSI layer completed abort request.
However, SCSI layer waits until all target requests are aborted or
completed anyway.
So the timing to call iscsi_del_transfer_task() and
iscsi_clear_all_transfer_task() were not effective.
Hence for ABORT TASK, call iscsi_del_transfer_task() before
iscsi_op_abort_task(), for ABORT TASK SET and LUN RESET, call
iscsi_clear_all_transfer_task() before iscsi_op_abort_task_set().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7c22b7305499e6e7d7335b7b5616a3abac0252c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3149
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To eliminate the cache issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id67fabb901de9666e6bad04c9df74a538bdbc659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3662
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Sun Zhenyuan <sunzhenyuan@baidu.com>
Purpose: To make the pdu management consistent with other PDUs, then
we can easily adapt our code into some hardware offloading solution.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic4a2847fd1b6cacda4cbaa52ff12c338f0394805
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3588
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RDMA target can't handle bidirectional xfer type, in debug build
it throws an assert in nvmf_rdma_setup_wr function. NVMF controller
performs checks od opcodes, but the failure happens before this
check. Add similar validation in TCP transport.
Change-Id: I14400b9c301295c0ae1d35a4330189d38aeee723
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3436
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The variable can't be uninitialized, but gcc complains:
json_config.c:415:3: error: ‘params_len’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
spdk_json_write_val_raw(w, cfg.params->start, params_len);
Change-Id: I845dcc19fa18c3583c420e66c16c11a3fdf99ad4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3626
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The way this is written currently, there is a
(very very unlikely) chance that the first strdup
fails and the second one succeeds. Just clean that
up.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5ca1106c713753448a2bf988166a2d79ab9fa86d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3610
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
CC.EN, CSTS.RDY should not be modified during shutdown.
It doesn't make much sense (against nvme spec) and nvmf spec 1.1
doesn't mentioned it (4.6) either.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I7014b10b0217db61c3d380d5c0843808e54577cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3477
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When config entry fails spdk_json_decode_object(),
that basically means incorrectly formatted JSON config.
Decode object is simple enough here - 'method' and optional 'params'.
Before this change SPDK_ERRLOG printed garbage, rather than JSON
object that failed the decode.
We actually should not do it at all:
- the object is not formatted right already
- it might be the last object, so spdk_json_next() won't work
It was not usefull, so this patch removes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ife67ac0d9a1a66d567bfbdd5896e893f3e8cb3ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3257
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not all JSON methods require 'params' field to be supplied.
Verification of the JSON is done on server side in
parse_single_request().
We should not attempt to process garbage values on correct
JSON config file during app start.
Segfault can be observed if following valid JSON config is supplied:
{
"method": "framework_wait_init"
}
Resulting in:
json_config.c:388:13: runtime error: applying non-zero offset 18446744073709551600 to null pointer
AddressSanitizer:DEADLYSIGNAL
=================================================================
==3386067==ERROR: AddressSanitizer: SEGV on unknown address (pc 0x0000007260ff bp 0x7ffe6ea06890 sp 0x7ffe6ea067e0 T0)
==3386067==The signal is caused by a READ memory access.
==3386067==Hint: this fault was caused by a dereference of a high value address (see register values below). Dissassemble the provided pc to learn which register was used.
#0 0x7260ff in app_json_config_load_subsystem_config_entry /home/tzawadzk/spdk/lib/event/json_config.c:391
#1 0x7cbb13 in msg_queue_run_batch /home/tzawadzk/spdk/lib/thread/thread.c:505
#2 0x7cd00a in thread_poll /home/tzawadzk/spdk/lib/thread/thread.c:581
#3 0x7cfe18 in spdk_thread_poll /home/tzawadzk/spdk/lib/thread/thread.c:689
#4 0x71d6ef in _reactor_run /home/tzawadzk/spdk/lib/event/reactor.c:326
#5 0x71eb00 in reactor_run /home/tzawadzk/spdk/lib/event/reactor.c:382
#6 0x71f911 in spdk_reactors_start /home/tzawadzk/spdk/lib/event/reactor.c:477
#7 0x718237 in spdk_app_start /home/tzawadzk/spdk/lib/event/app.c:691
#8 0x407e94 in main /home/tzawadzk/spdk/app/spdk_tgt/spdk_tgt.c:120
#9 0x7f0f2eef2041 in __libc_start_main ../csu/libc-start.c:308
#10 0x4079ad in _start (/home/tzawadzk/spdk/build/bin/spdk_tgt+0x4079ad)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7ef1a764467817ad788fdf5dbe17eaeb99dcc22e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3256
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This becomes a problem when the qpair is reconnected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6677b396cf766684a4891ffbee93aa3e4e83374d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For some other reason when the host didn't have a block
device e.g: "Nvme0n1", we will call exit(1) directly in
the process, the ASAN will report memory leak issue, so
before exiting the process, we call spdk_app_stop to
do the cleanup.
Fix issue #1422.
Change-Id: I7b7a05807625586bd5b97dc31f41e2b86e1b323f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3586
Community-CI: Mellanox Build Bot
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we don't resubmit receive request associated with AER
request to SRQ. This leads to reducing of SRQ elements and may
lead to non responsive NVMF target.
Fixes#1507
Change-Id: Ie96f8c4be0202ae973e561ebe5ea28688a6a3b72
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3558
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During virtio_pci_dev_probe, if enum_cb fails, hw needs
to be released. But in bdev_virtio, if vdev fails after
initialization, it will enter the bdev destruction process
which call the modern_destruct_dev function and hw will
be released during the process. So we will encounter the
problem of hw being released twice.
Change-Id: Ifba35284c072355ba0e10428b597a1894d32d59e
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3564
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Give this a more generic name. We're going to be using these
events for more than just hotremove coming up.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia5356e9ab809807ba4d85ecc212a496e96012bce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3559
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We can OR some of the bits ,and setting them one time.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ie919ef66f3b8deea125df47d2194130b364c302a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3489
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This reverts commit 6194cb2e15.
It's unclear whether we need to add a new API for the env layer
for upcoming work. Nothing currently uses it. When we have a clear
need, we can add this back in.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I174276799d650a1365b37a737271a54a796cd455
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3561
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to resize the backend bdev of vhost-blk
and notify the guest OS that the capactiy of virtio-blk
disk has been resized.
The spdk api entry is `spdk_bdev_notify_blockcnt_change`.
Any bdev if used as vhost-blk backend may need to implement
a rpc that calls this function.
Related DPDK patch has been merged and release in 20.02.
https://www.mail-archive.com/dev@dpdk.org/msg153365.html
Change-Id: I961c61de0fc03e210d776035a40f3a4adfa9b4f3
Signed-off-by: Li Feng <fengli@smartx.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1468
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added to the framework as well as all 3 engines. Needed by apps
in the event that they have to fail following the creation of a
batch, allows them to tell the framework to forget about the batch
as they have no intent to send it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id94754ab1350e5a969a5fd2306bd59c38f0a0120
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3389
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a process cleans up IO qpairs from another crashed
process in a multi-process environment, we must not try to
abort reqs for that IO qpair. Any reqs will contain callbacks
for the crashed process which we must not try to execute in
a different process.
Fixes issue #1509.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e58cce7bdb86e3feb4084733815c086901f867e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3536
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since rqpair->qpair.group is set to NULL when we remove the
qpair from poll group, we fail to send event to qpair's thread.
This patch adds a pointer to io_chaneel to spdk_nvmf_rdma_qpair
structure and a function to handle poll_group_remove transport
operation. In this function we get io_channel from nvmf_tgt,
this channel will be used to get a thread for sending
async event notification. This also guarantees that the thread
will be alive while we are destroying qpair.
Change-Id: I1222be9f9004304ba0a90edf6d56d316d014efda
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3475
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Makefile support in DPDK was deprecated and will be removed soon,
so switch to the officially supported way of building DPDK -
with meson and ninja. Two new tools. Basically, our Makefiles
will invoke meson+ninja for DPDK, no other SPDK components are
affected.
Apparently DPDK wanted to move away from an octopus-like config
system and the ideology behind meson configuration is simple now:
build everything by default. Some PMDs can be explicitly disabled
with meson command line, but all libraries (both static and shared
versions) and test apps are built unconditionally.
How long does it take to build minimal DPDK with meson? Too much.
On my machine half of the total build time is spent on libraries
we don't need at all. (I have some hacks up my sleeve to disable
building those libraries - see the subsequent patch.) As for the
official way of building a minimal DPDK, there was a patch [1]
on dpdk mailing list to introduce more specific configuration,
but it was rejected:
> We talked about this a few times in the past, and it was actually one
> of the design goals to _avoid_ replicating the octopus-like config
> system of the makefiles. That's because it makes the test matrix
> insanely complicated, not to mention the harm to user friendliness,
> among other things.
>
> If someone doesn't want to use a PMD, they can just avoid installing it
> - it's simple enough.
>
> Sorry, but from me it's a very strong NACK.
Let's not follow that direction, hack the DPDK build system instead.
As for advantages of meson+ninja over Makefiles? I can't find any.
It's another build system that does a lot for you with some functions,
magic options, and a built-in dependency system. It seems nice if you know
the syntax, but it's another component that you need to learn, debug,
and possibly find bugs in (there's a lot of github issues open for meson).
I would compare it to CMake.
As for changes in this patch: rather that explicitly disabling
PMDs we don't need, specify a list of PMDs we do need and disable
everything else found in ./dpdk/drivers/*. This way we won't have
to disable the new PMDs as they're added to DPDK.
Meson configuration also sets RTE_EAL_PMD_PATH #define to a valid directory
with built PMD shared libs. When it's set, DPDK dynamically loads all shared
libraries inside. The drivers there depend on DPDK shared libs and fail to
load in static SPDK builds, so we disable them altogether by unsetting
RTE_EAL_PMD_PATH in the meson-generated config file - just like
DPDK Makefiles did. EAL checks for RTE_EAL_PMD_PATH being empty and skips
loading any external PMDs then. We do it for both static and shared libs.
We specify all PMDs at build time for now, so there's just no need to load
them dynamically.
We have three more hacks in our submodule:
* disable building dpdk apps by commenting-out a line in dpdk/meson.build
* disable building unnecessary libs (build everything that spdk *may*
need)
* build isa-l compress pmd with `-L[...] -lisal`. DPDK expects to find
libisal with pkg-config. We don't want to prepare a pkg-config file,
so comment-out a failing check in another meson.build file and provide
isa-l through CFLAGS and LDFLAGS.
We also need to make some changes to our test/external_code. First of
all, -ldpdk is no more. Meson build generates a pkg-config file with all
libs, but we'll switch to it in a separate patch - for now just specify
all -lrte_ libs one by one. -Wl,--no-as-needed has to be added to some
test cases, otherwise rte_mempool_ring isn't loaded. We don't use any
APIs from this library, it only has a static constructor that provides
a few callbacks used by rte_mempool_create(). Also, since DPDK now builds
both static and shared libraries, we need to add -Wl,-Bstatic to force
using static libswhere required. It's only needed for DPDK libs, but we
use it for SPDK libs as well since there's no harm.
As for performance:
$ ./configure --enable-debug --with-crypto --with-reduce
$ time make -j40 -C dpdkbuild all
with meson:
real 0m8.287s
user 1m7.983s
sys 0m10.548s
before, with the old DPDK makefiles:
real 0m20.232s
user 0m55.921s
sys 0m16.491s
The subsequent builds are much faster too:
$ time make -j40 -C dpdkbuild all
meson:
real 0m0.876s
user 0m0.663s
sys 0m0.217s
makefiles:
real 0m10.150s
user 0m11.740s
sys 0m6.772s
[1] http://inbox.dpdk.org/dev/1a07d1cd59d84dce84e56c10fdabf5e5504560a6.camel@debian.org/
Change-Id: Ic65db563014100bafb12e61ee0530cc2ae64401d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1440
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that drivers can be registered from upper layers there's
no need to keep them centralized inside env.
(check_format.sh complains that spdk_pci_nvme_get_driver() shouldn't
start with the spdk_ prefix - to workaround that we move the function
declaration from one place in env.h to another - that's enough to
convince check_format it really is a public function)
Change-Id: If86aebd6c997349569c71430ec815b413eb44ef8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3187
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows SPDK apps to register new PCI drivers outside of
the env layer, enabling SPDK as a whole with new use cases.
Change-Id: I0c998a9ec249c3ca610b7b3b8b6caf616b16f64c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3185
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
An alternative to spdk_pci_*_get_driver();
Change-Id: I20a80b3c655a37fb1c76da21c2b70d5678041fab
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3186
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We want to make struct spdk_pci_driver public, so add env-agnostic
fields that define a driver directly to that struct.
PCI driver registration (potentially in upper layers) will only use
spdk_pci_id-s and spdk pci drv_flags, then those will be translated
to DPDK equivalents inside env_dpdk.
Change-Id: Ia24ecfc99ebf0f54f096eaf27bca5ed9c0dfe01d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3183
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not needed with new scheme around accel_task in prior patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic6f16654db62fe1dc51b0822f0ff92261da4494c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3212
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was sort of a clunky interface requiring a couple of inline
functions in every app that wants to use the accel_fw moving
forward. By having the accel_fw public API accept a callback arg
instead of an accel_task combined with adding a pool of accel_tasks
in the accel_fw engine we can eliminate this.
After changing the parm to a cb_arg, changes were made to all accel_fw
interfaces to put cb_fn and cb_arg as the last parms in public and
private function calls.
Related bdev_malloc changes need to be in this patch in order to pass CI.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2b75764e534562d91484a094c3352266156d8425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function hasn't kept up properly with the states that
we use for tracking the qpair lifecycle.
Add checks for NVME_QPAIR_DISCONNECTING and NVME_QPAIR_DESTROYING.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I51607d4f00e94937b08fca28e766163580d46461
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3359
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With this patch, spdk_app_start/stop can be repeatedly
called by users based on their upper level application's
requirement.
Changes are:
* Add reinit ability inside spdk_env_init and related functions
* Clear g_shutdown_sig_received in spdk_app_setup_signal_handlers
* Clear malloc_disk_count in bdev_malloc_initialize
Change-Id: I2d7be52b0e4aac2cb6734cc1237ce72d33b6de0c
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2260
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set g_external_init to false when the function calling
is succeed in the end of function spdk_env_init.
Change-Id: I3fc4b4c87b11ca34354efafdd9644c077309c638
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3455
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new abort functionality doesn't take custom admin cmd
handlers into account.
This commit allows setting a custom admin cmd handler
for abort that provides the ability to influence the
bdev lookup to which the abort is sent to.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I3a66c6f863f5ee4d89cb2194dffdc6855945fa8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3485
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
ABI dependency check tool complained the following:
00:06:10.012 ************************************
00:06:10.012 START TEST confirm_abi_deps
00:06:10.012 ************************************
00:06:11.559 No corresponding object for libspdk_bdev_uring.so in canonical directory. Skipping.
00:06:12.237 No corresponding object for libspdk_event_sock.so in canonical directory. Skipping.
00:06:12.485 Please update the major SO version for libspdk_ioat.so. A header accesible type has been modified since last release.
00:06:15.388 No corresponding object for libspdk_rdma.so in canonical directory. Skipping.
00:06:15.663 No corresponding object for libspdk_sock_uring.so in canonical directory. Skipping.
00:06:15.954 Processed 55 objects.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a6cc91ac56ed693ae0676cf64e01ed3ff620ffc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3511
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
struct spdk_nvmf_request holds req_to_abort and so passing req_to_abort
separately is not really necessary now. The internal API
nvmf_ctrlr_abort_request() was added at the stage of prototyping.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ef2467d6f92422f044650c62a0777b95c0fc1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3488
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Now that we support only DPDK 18.11+ and always have
to register pci drivers to DPDK on initialization we
don't need that flag - it's always true.
Change-Id: Ibf1d79155595609fe9093f58e056bea25db6fdb2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3446
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows struct rte_pci_id which had class_id as well.
We'll need it to make some additional DPDK APIs public through
the env abstraction.
Change-Id: I794a6cd6b17e48daf53b48fa5abe3d3dcfeaa403
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3182
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
You don't get notified when someone starts using your hooked
device, so there's not much gain from knowing when someone
stops.
Remove that callback and also move DPDK device detach under
the same lock which sets the pending_removal flag. This eliminates
a data race window when hotremove notification could arrive
after device was detached, but before it was scheduled to be
removed.
vmd and ioat nest the spdk_pci_device struct and abigail complains
even though the parent structs only have forward declarations in
public headers. Adding those two structs to the suppression list
doesn't help though. Abidiff still complains about the pci device
struct being changed, probably because ioat.h and vmd.h both include
env.h. Abidiff suppresion list should eventually be split per-lib,
but for now ignore struct spdk_pci_device changes globally.
$ abidiff [...]/libspdk_ioat.so [...]
'struct spdk_pci_device at env.h:652:1' changed:
type size changed from 1024 to 960 (in bits)
1 data member deletion:
<SNIP>
Change-Id: I9b113572c661f0e0786b6d625e16dc07fe77e778
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2939
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A workaround for kernel deadlocks surfaced in #1275.
DPDK basically offers two APIs for hotplugging all PCI devices:
rte_bus_scan() and rte_bus_probe(). Scan iterates through
/sys/bus/pci/devices/* and creates corresponding rte_pci_device-s,
then rte_bus_probe() tries to initialize each device with the
supporting driver.
Previously we did scan and probe together, one after another, now
we'll have an intermediate step. After scanning the bus, we'll
iterate through all rte_pci_device-s and temporarily blacklist any
newly detected devices. We'll use devargs->data field to a store
a timeout value (integer) after which the device can be un-blacklisted
and initialized. devargs->data is documented in DPDK as "Device
string storage" and it's a char*, but it's not referenced anywhere
in DPDK. rte_bus_probe() respects the blacklist and doesn't do
absolutely anything with blacklisted ones.
The timeout value is 2 seconds, which should be plenty enough
for an NVMe device to reset, leave the critical lock sections in
kernel, and let us initialize it safely.
Note that direct attach by BDF doesn't respect the blacklist,
so an NVMe attach RPC won't be delayed in any way, it will continue
to work as it always did. Only the automatic discovery & enumeration
is deferred.
Change-Id: I62b719271bd0755bc2882331ea33f69897b1e5e5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1733
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extensive testing showed it can fail:
> EAL: eal_parse_sysfs_value(): cannot open sysfs value
> /sys/bus/pci/devices/0000:02:00.0/vendor
> EAL: Scan for (pci) bus failed.
spdk_pci_enumerate() would previously return with error because
of this and e.g. the test nvme hotplug app could immediately exit
with failure. A mis-timed scan shouldn't cause this kind of failure,
so ignore it's return code. This shouldn't cause any issues.
Change-Id: I9253219c218981a747774a8632335963cfb0db53
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This is an attempt to workaround a kernel data race spotted in #1275.
We have to delay our VFIO interraction until after the kernel handles
the PCIe hotremoval. Otherwise we risk having a deadlock inside the
kernel. We could put a dummy delay in SPDK hotremove routine, but we
don't know exactly how long we have to wait, so wait for the VFIO
hotremove notification to arrive instead. From what I understand it
is always sent after the kerner already releases the critical locks.
This patch breaks hotremove for VFIO devices when running with
DPDK version < 18.05, but those reached EOL already and their support
is removed from SPDK later within this series.
It would be nice to wait for this VFIO notification inside lib/env_dpdk
e.g. inside the detach function, but we don't know there why the
detach is happening. It could be triggered by a user RPC, not physical
device hotremoval.
Change-Id: I2727de923bb2e3e05a83202465330a32a77d7cfc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1732
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The hooked spdk_pci_device was being removed when someone
stopped using it (detached from it). The following didn't
work:
$ rpc.py bdev_nvme_attach_controller 10000:00:01.0
$ rpc.py bdev_nvme_detach_controller 10000:00:01.0
$ rpc.py bdev_nvme_attach_controller 10000:00:01.0
The second attach can't find PCI device 10000:00:01.0.
To fix it, simply don't do anything in VMD on device detach.
The entire callback will be removed soon. You don't get
notified when someone starts using your hooked device, so
there's not much gain from knowing when someone stops.
Change-Id: I147c24609077be24182ecfd2e273988a2e9e26b2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
There was a chance we scheduled a device removal to the DPDK thread
while that thread was already removing the device from a VFIO hotremove
notification (on the DPDK interrupt thread). The second hotremove
attempt touches some freed memory and segfaults.
The VFIO hotremove notification already checks pending_removal flag
under a mutex and sets it to true, so do the same in spdk_detach_rte()
(called from the SPDK init thread).
Change-Id: Ib3f0eb7c0c5c6e1ab8cf253b7711fd149925a143
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1730
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Simplify the code path a bit. VFIO notification is the only
place where detach callback is called from the dpdk intr thread.
Detach checks the current thread and behaves differently in this
case, but it could be the VFIO notification that simply calls
a different function.
So instead of carrying the VFIO notification through the generic
detach routine, carry it just through the DPDK-thread specific
subset. This lets us remove some ifs in the generic routine.
Change-Id: I5e8866e4643ef08fb3cd12621e2d262b5e827c74
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 301c5aeec9.
The patch doesn't fix anything as the hotremoval could be still
called twice and the second call would do use-after-free.
Change-Id: I78a1120707dbdf36c871ec378a312c4a058fc76b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function can fail with -EAGAIN or -ENOMEM so we
should really check the return value.
Change-Id: I4a443351f3c85032f47e8af9e70b6b71ba3413f5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3240
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Also one small bug fix w/compare in accel_perf as a result
of changes made in accel_perf sicne base compare was added.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id8e67bd9de9cbd006ac148f4a77807cc3e8e662b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Also update accel_perf to support it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ida7b863de02c64239ec4cfbdc3b0235d4e0521f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2954
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also as a minor drive-by, added verify capability for fill that
wasn't there before, useful in making sure the prep function
was working and really should have been there anyway.
idxd support for prep fill will follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib54311c1fb98abd2fb61df6603cf3c5300b71161
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2952
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When an engine has not filled out an entry point for an accel_fw
function, call the sw implmentation that's built into the accel_fw
transparently.
Also update the accel_perf app to no longer block attempts to use
capabilities not reported as supported by the selected engine but
instead to print an informational message.
The exception is batch related commands as their implementation
is specific to the engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0b3971d075ced20182f97e95147e8887103e68cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Adds support for both the accel fw and the sw implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib8748f272a688a074ca475a86dea14179acc020d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add disable_sections_merge() procedure that will allow
to have multiple sections with a same name.
This behaviour is how FIO treats such sections
and so will be used in bdevperf config file.
Change-Id: If221daeb7753d91b5d2608d25ccbb16f2d43ccce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3433
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When there are many Target information which exceeds the data
buffer, the initiator and target can use long text responses,
but SPDK doesn't support this feature now, so here we just
report an error here, we may add this feature in following
patches.
Fix issue #1442.
Change-Id: I5962c00943819cd11ce21e610e4b37265451f0cb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3454
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1 Change the default factor from 4 to 8, which can be used
to improve the performance.
2 Change the base buffer size in nvme_tcp.c,
we should not use sizeof(struct spdk_nvme_tcp_cmd),
it is 72 bytes. Normally, the initiator will receive
C2h pdus and R2T Pdus by most, so set the size of using
sizeof(struct spdk_nvme_tcp_c2h_data_hdr) is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I384f4cb026cb8d83e75b639f7256ee8cb8ed1df1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3283
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no reason to continue processing these requests if the
qpair is not still active. We should complete them and free
any resources they are still holding.
Also, not doing so can cause issues with trying to access pointers
in the qpair after they are invalid. See issue #1460.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6e570a576983dfedf726dc4a9a83316209403e00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Includes a few related changes:
* slight refactor to have common prep function for batch prep
commands in the sw engine
* added support for dualcast batching in accel_perf example app
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If9f078a0f8eb509d296e60a94331c92a72f8cb10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2913
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Doesn't provide any performance benefit but lets apps consistently
use the batch interface regardless of engine. Additional functions
and test code to follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia737045560ddd5117a689f7715fa206268bbc13d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2911
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b43e79c3b0d9c53ed04b01a9eaa9b117b32d81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3013
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to tqpair->group->group.pending_buf_queue.
If the state of the request is DATA_TRANSFER_TO_CONTROLLER_PENDING,
the request is queued to rqpair->pending_rdma_read_queue.
If the state of the request is DATA_TRANSFER_TO_HOST_PENDING,
the request is queued to rqpair->pending_rdma_write_queue.
According to the current state, dequeue from the corresponding
queue, and then call an new helper function
nvmf_rdma_request_set_abort_status().
Using helper function will be easier to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0327f4d2c4728a11b3b6bbc7c2252f0b35263cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3012
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_rdma_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS, or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1462a21db7270f3d63f8f293ad4be61d52e74da1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3011
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98347b68e8b6b4a804c47894964cb81eae215aaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3010
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In my mind, we should firstly remove the sock from the group, then
all the call_cb of pdus will be handled, then we clear the task,
we can avoid the duplicated resource recycling.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic5fad130e58c9dcb42a237973979b042eabdf43a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3309
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to both tqpair->group->group.pending_buf_queue and
the queue per state.
If the state is AWAITING_R2T_ACK, the request is queued to the
queue per state.
Dequeueing from the queue per state is done in
nvmf_tcp_req_set_state(). Hence explicit dequeuing only when the
state of the request is NEED_BUFFERING.
Most abort operation is common between two cases. We can use fallthrough
in switch-case but factor out the common operation into a helper
function nvmf_tcp_req_set_abort_status() instead because we may use
the helper function in future and using helper function is easier to
read than fallthrough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1695b084d5d1f2537fbdd512bc3cd136e0f6a65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3009
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_tcp_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1abceecc211ee79d8ac18a82dc63b13d313a6f27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3008
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
State machine is different among NVMe-oF transports and is
encapsulated to the transport neutral NVMe-oF controller and
NVMe-oF qpair.
To implement abort operation for each NVMe-oF transport,
add a function pointer qpair_abort_request to struct spdk_nvmf_transport_ops
and a stub nvmf_transport_qpair_abort_request() to encapsulate
which transport is used.
The following patches will implement qpair_abort_request for each
transport. Each qpair_abort_request() is responsible to call
spdk_nvmf_request_complete() for the abort request.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2beac959ed428c5108cf33691226b7fae5cd24d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3007
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out abort operation on the specific qpair into a helper
function nvmf_qpair_abort_request().
After this refactoring, nvmf_ctrlr_abort_done() calls
_nvmf_request_complete() only if the passed status is zero.
If the passed status is not zero, nvmf_qpair_abort() is responsible
for calling _nvmf_request_complete() instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4828c0e21cc7650210675661d6e1c0fd54c7a2cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2991
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Description is not clear but according to the NVMe specification,
always set the completion status to success and differentiate only
the bit 0 of CDW0 between success and failure for abort command.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0195e72fe1d7fcc2592f47e9dcf92ac56912282c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1965
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A new API spdk_nvme_ctrlr_cmd_abort_ext() gets cmd_cb_arg as a
parameter, and use it to abort requests whose cb_arg matches cmd_cb_arg.
The caller can set the parameter qpair to NULL if it wants to abort
requests on admin qpair.
Hold ctrlr->ctrlr_lock throughout because abort request is submitted
to admin qpair.
The API is not critical for performance, and so initialize parent
data first.
The API is for a specific qpair, and so hold SQID in the parent,
and it is copied to the children. On the other hand, CID is set
to child when request to abort is found.
Use an new helper function nvme_transport_qpair_iterate_requests()
to add abort request for each outstanding request which has
cmd_cb_arg as its callback context.
The case is possible such that the request to abort is not outstanding
yet but queued. Hence abort queued requests which has cmd_cb_arg
as its callback context too, but it is done only if there is no error
so far.
If only queued requests are aborted and there is no outstanding
request to abort, complete with success synchronously.
If there is no outstanding or queued request to abort, return -ENOENT.
When any abort request is submitted, the difference between success
and failure is only bit 0 of CDW0 according to the NVMe specification.
We cannot the existing helper functions nvme_request_add_child() and
nvme_cb_complete_child() but can use nvme_request_remove_child().
nvme_qpair_submit_request() may use only nvme_request_remove_child()
from these three helper functions. Hence we use req->parent as other
types of request do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3a271c6542f8e2e6b425b3bf6151f41e924bc200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use another list dedicated to hold queued requests being aborted
to avoid potential infinite recursive calls.
Add a helper function nvme_qpair_abort_queued_req() to move requests
whose cb_arg matches from qpair->queued_req to qpair->aborted_queued_req.
Then nvme_qpair_resubmit_requests() aborts all requests in
qpair->aborted_queued_req.
The first idea was that nvme_qpair_abort_queued_req() aborts queued
requests directly. However, this caused infinite recursive calls.
Hence separate requesting abort to queued requests and actually
aborting queued requests.
The detail of the infinite recursive calls is as follows:
Some SPDK tool submits the next request from the callback to the completion
of a request in the completion polling loop. For such tool, if the callback
submits a request and then aborts the request immediately, and the request
could not be submitted but queued, it will create infinite recursive calls
by request submit and abort, and it will not be able to get out of
completion polling loop.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8196182b981bc52dee2074d7642498a5d6ef97d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In INI config, split key based on whitespace AND symbol '='
This allows to have same format as FIO configs
FIO style config will be used for bdevperf config file
Change-Id: I92c501c839842919afb5c23ed935be010ae2b168
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3151
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We have no particular requirement to keep both conn->outstanding_r2t_tasks
array and conn->active_r2t_tasks list now.
To improve readability and maintaineability, unify two into the latter,
conn->outstanding_r2t_tasks list. Update unit test accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25cf7cffbe39ac66e102eb3052340de6ef65c8f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3115
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously iscsi_del_transfer_task() dequeued the task only from
the array conn->outstanding_r2t_tasks[].
process_non_read_task_completion() had dequeued the task from
the tailq conn->active_r2t_tasks then.
However abort_transfer_task_in_task_mgmt_resp had not dequeued the
task from the tailq conn->active_r2t_tasks then.
This was an apparent bug, and is fixed here. Update unit tests
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I93f02b2fb670dcee4c32d61c264e3ad5b4f9f43e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3108
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, we fixed a similar bug that iSCSI target got seg. fault
if connection is being exited between spdk_iscsi_conn_write_pdu()
and its callback iscsi_conn_login_pdu_success_complete() are executed.
This fix was not sufficient and we still saw similar error.
Not only socket write but also SPDK message is asynchronous and
connection may start exiting between iscsi_conn_schedule() and
iscsi_conn_full_feature_migrate().
This patch fix this new issue.
The previous fix was
https://review.spdk.io/gerrit/c/spdk/spdk/+/1275
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5cc422529a335e5f1982693bdf910ac7debe6f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3074
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, add g_active_conns to manage active connections
by TAILQ. We cannot remove the is_valid bit and g_conns_array
to support iSCSI top application, but this change simplifies the
code a little.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8b449f3056ffaed19f23f42d83c912dfba9a7b75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3090
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously free connections had been managed by g_conns_array,
and allocate_conn() gets the lowest free connection. This had worked
almost as LIFO, and the just freed connection had been reused
immediately to the new connection.
Using TAILQ makes management of free connections FIFO, and this will
be more intuitive and simpler, and avoid potential issues due to the
fact that we do not know the state INVALID is the current connection
or the current connection is exited and the new connection is allocated.
This patch includes following updates.
Remove the test condition that the connection ID should be zero.
Connection ID is used as Target Transfer Tag (TTT) and TTT is opaque
number. Hence requiring connection ID to be zero is not meaningful.
iscsi_conn_free() calls free_conn() while holding g_conns_mutex, but
iscsi_conn_construct() does not call free_conn() without holding
g_conns_mutex. Hence add g_conns_mutex to the latter.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I204f66469f0bf54845c773da5b4ac86f3c8dca60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch only includes the basic framework for batching and the
ability to batch one type of command, copy. Follow-on patches will
add the ability to batch other commands and include an example of
how to do so via the accel perf tool. SW engine support for batching
will also come in a future patch. Documentation will also be coming.
Batching allows the application to submit a list of independent
descriptors to DSA with one single "batch" descriptor. This is beneficial
when the application is in a position to have several operations ready
at once; batching saves the overhead of submitting each one separately.
The way batching works in SPDK is as follows:
1) The app gets a handle to a new batch with spdk_accel_batch_create()
2) The app uses that handle to prepare a command to be included in the
batch. For copy the command is spdk_accel_batch_prep_copy(). The
app many continue to prep commands for the batch up to the max via
calling spdk_accel_batch_get_max()
3) The app then submits the batch with spdk_accel_batch_submit()
4) The callback provided for each command in the batch will be called as
they complete, the callback provided to the batch submit itself will be
called then the entire batch is done.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4102e9291fe59a245cedde6888f42a923b6dbafd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2248
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Logic error Dereference of null pointer ctrlr.c
nvmf_ctrlr_async_event_request 1522
Dereference of null pointer is not possible if sgroup obtained using
ctrlr obj. Adding corresponding asserts suppresses the warning.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I78b32fadd5449ee9b533f65193c70e55cf9a8f1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3251
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Having functions without qpair on the interface allows for wider usage
e.g. by nvmf layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I3a51ad53f00eb29e2ba2681ef4ff0cc2a197b65d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
In the case that the configuration field is not set, it will
return "-1" and then implicitly convert to the unsigned
case where the variable is wrongly set.
Change-Id: I7b2c64d653badd731d8e6df46629231343a0ae6d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3236
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previous we fix the same issue in this commit:
cb98b2ab3e
But we forget to fix it here. And we also need to update here,
otherwise we will still face the same issue described in
commit: cb98b2ab3e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3660dbb6e97c92ea4cb347cfce4bf23c6dfe97ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3242
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15356c69e676dc41d3af69caa6d12c1fcb282152
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3071
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
To abort requests whose cb_arg matches, add child abort request greedily.
Iterating all outstanding requests is unique for each transport but
adding child abort is common among transports, and adding child abort
is replaceable by other operations.
Hence add qpair_iterate_requests() function to the function pointer table
of transport, and pass the operation done in the iteration by a
parameter of it.
In each transport, the implementation of qpair_iterate_requests() uses
TAILQ_FOREACH_SAFE() for potential future use cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic70d1bf2613fce2566eade26335ceed731f66a89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2038
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Recently two patches were merged but we should have get more reviews.
The fix done in TCP transport will be better because we can keep
the existing functions and make the code change minimum.
Restore nvme_rdma_req_put() and move removing rdma_req from
rqpair->outstanding_reqs to nvme_rdma_req_complete(). One exception
is the case that only nvme_rdma_req_put() is called. For the case
remove rdma_req from rqpair->outstanding_reqs before calling
nvme_rdma_req_put().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3f68dbc88c60af6b8f4ecc3209fde9b763ac3189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3073
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Each request has a callback context as cb_arg, and the callback to
nvme_complete_request() for the completed request may reuse the context
to the new request.
On the other hand, TCP transport dequeues tcp_req from
tqpair->outstanding_reqs after calling nvme_complete_request() for
the request pointe by tcp_req.
Hence while nvme_complete_request() is executed, tqpair->outstanding_reqs
may have two requests which has the same callback context, the
completed request and the new submitted request.
The upcoming patch will search all requests whose cb_arg matches to
abort them. In the above case, the search may find two requests by
mistake.
To avoid such error, move dequeueing tcp_req from tqpair->outstanding_reqs
before calling nvme_request_complete(). One exception is the case that
only nvme_tcp_req_put() is called. For the case remove tcp_req from
tqpair->outstanding_reqs before calling nvme_tcp_req_put().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f2ac292c60431ac1e27b8657db92b220860a0a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2865
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As is well known, we may also handle the r2t data pdu receving earlier
before calling the cb function of send_cmd due to the outof order execution
of the lower layer uring socket interface.So we need to fix
this issue, otherwise the data of the sending_pdu will be placed with the
wrong data.
And it will cause the issue shown in
https://github.com/spdk/spdk/issues/1473Fixes#1473
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Idac1ad65761695f3a655b85003861c1d1f4f3875
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3215
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When set bdev_auto_examine to false, the bdev layer will only
examine a device if it is in the allowlist. Currently the allowlist
is always empty. Will add api to add bdev to the allowlist in the
future.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Iee7597623e7dd4172acc88736d23e0e5a4a2b03e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3101
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can speed up the check for whether a blob is already open
significantly.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If32b0b1f168fcdb58e61df6281d7b7520725a195
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Compiling warning :
spdk/lib/iscsi/tgt_node.c:550:42: warning: ‘%s’ directive output may be truncated
writing up to 2927 bytes into a region of size 1024 [-Wformat-truncation=]
550 | snprintf(port_name, sizeof(port_name), "%s,t,0x%4.4x",
| ^~
In file included from /usr/include/stdio.h:867,
gcc -v:
gcc-10.1.0-290-gc32074f6de
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I56fd5adfc461254751b54fd8610949e72ecbd8f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3216
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
nvme_rdma_qpair_submit_recvs is not judged in
nvme_rdma_poll_group_process_completions path.
If we do not clean the recvs_to_post.first we
may get the wrong current_num_recvs when the rc
is non-zero and call it again.
Change-Id: If0046e711525dcfcb419132a01fed7a09db13ba0
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3163
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Put the destroying state after the disconnected state.
Because nvme_transport_ctrlr_disconnect_qpair will modify the state
of qpair to disconnected, and in the path of rdma, it will postpone
the deletion of qpair until the release of pg by judging the
destroying state. So qpair is not deleted.
Change-Id: Ica606905cddf67d0ffda14bd48cc5f4e424f01ee
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3136
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the user requests a non-default command set configuration, via the
probe_cb() supplied to spdk_nvme_probe(), which is not supported, then
the controller initialization will not proceed.
This patch changes that behavior into falling back to the NVM command
set and continue with the controller initialization. It is done by
assigning the NVM command set to opts.command_set such that the user
knows in attach_cb() with which command_set the controller is
configured/enabled.
The fallback is needed since the user does not have access to the
controller capabilities register. The strategy left for the user is thus
to try. However, this is an issue, as the user only has one attempt, as
subsequent calls to spdk_nvme_probe() will not trigger probe_cb() for
the controllers whose initialization did not proceed.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Ia414628fcd7d56956649647775462e62d98c0a90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2931
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These SSDs set the oacs.security bit but do not actually
support OPAL. So do not set the controller flag indicating
SECURITY_SEND_RECV support in this case.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fcfeafcc8d9439a1c53c60a1aea1801923a2ce5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3156
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
blob_insert_cluster_msg() will release the already claimed
md page(intended for extent page) if the corresponding extent page
is found to be allocated. But later blob_insert_extent() may fails,
and this cause blob_insert_cluster_cpl() to release the same md page again,
this could be wrong if this specific md page is clamied by others, thus
cause data corruption. So, put it to zero after released in
blob_insert_cluster_msg().
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I46eba79b24b1950318002dcb27cb51b01ca566ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3152
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
QEMU won't emulate wide (>8 byte) instructions on an MMIO
region. We tried to fix this previously but it wasn't sufficient.
So this version adds an explicit copy function that will only
copy 8 bytes at a time from the source cmd pointer into the
SQ cmd point in the virtualized CMB.
Fixes issue #1458.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I804005a2e8cf3f7365c1608674f82a3f843e59ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3135
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The length of a keyed SGL data block is limited by 3 bytes.
Add a check to fail requests which length exceeds 3 bytes.
In other case we can send an incorrectly formed SGL request with
an invalid or zero length.
Fixes issue #1450
Change-Id: I77cdaff5fbf4be5754a3ac6008b8ccd532ac5905
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3056
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Without this patch, we will face the following warning code
when compiled with (--with-uring --enable-debug) while testing
big I/O size: 256KB, e.g.,
"nvme_qpair.c: 474:nvme_qpair_resubmit_requests: *ERROR*:
Unable to resubmit as many requests as we completed"
The reason is because the nvme_tcp_request structure is not freed yet
if send_ack is not set, so there will be no entries when there
are other requests submit again.
And this patch can mitigate such issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I4c7616fbd3c82a883b4e9facd257a1a4f66e876d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It should return "NVME_TCP_PDU_FATAL". I think that
this issue is introduced after we move the data
copy from tcp transport layer to the socket
layer. And it should return "NVME_TCP_PDU_FATAL now",
and it will be consistent with the logic in the same
function.
With this patch, it will fix the big I/O size write
from the initiator.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide018adb603eb13d002fc98886258dd1e2424f7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Internal headers (such as one in SCSI) should not trigger the
SO versoning fialures. This was addressed by patch:
(f53bf76)test/check_so_deps: limit scope of header checks.
Additionally quite recently another patch increased the SO version
for SCSI:
(6b6a3ff)scsi: add SPC2 RESERVE/RELEASE support
They were not in the same relation chain when being submitted,
so they didn't test against each other.
This resulted in:
SO name for libspdk_scsi.so changed without a change to abi. please revert that change.
For this reason this patch revs down the SO version for SCSI lib.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I69caae6c139e546afe2eeeae3395dc80ff898339
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
resp->error is usually a JSON object, but it was printed as
a string. For objects, resp->len was the number of fields in
this object, definitely not a length of the string to print.
There was usually just 3 characters printed with no newline.
To print this object we should stringify it using our json_write
library, so that's this patch does.
Before:
json_config.c: 192:rpc_client_poller: *ERROR*: error response: {"co
(missing newline at the end)
After:
[2020-06-19 13:33:57.060869] json_config.c: 220:rpc_client_poller:
*ERROR*: error response:
{
"code": -32601,
"message": "Method not found"
}
[2020-06-19 13:33:57.061067] app.c: 714:spdk_app_stop: *WARNING*:
spdk_app_stop'd on non-zero
Change-Id: I5d7aeba2b972782f18b8da0141ed4bfd79833f80
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
10 is kind of unreasonable. You could easily start
seeing failures if you had just 3 intiators trying to
connect with 4 io qpairs at once.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9985ffa3b03ebb33880eb5934b60eaafab57c82d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will allow applications to discern specific connect
behavior and make choices relative to it.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I46182c285367ceb8a72511defe4508b3592b4572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rdma_qp may not be initialized when qpair is not fully
created. When such a qpair is being destroyed we may pass
a NULL pointer to spdk_rdma_qp_disconnect or spdk_rdma_qp_destroy
and hit an assert. This patch fixes this problem for NVMEoF
target and initiator.
Change-Id: I84787dc1b1211293c2a19f59d47727eaecd9d5a1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3050
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When a NVMe device is hot removed, subsequent calls to
nvme_qpair_submit_request can fail with ENXIO.
The failure path handling for ENXIO did not free the request which
exhausts the qpair's free_req list eventually and all IOs are stuck
going forward.
This fix adds the same cleanup handling to nvme_qpair_submit_request
for this error case as it is done in _nvme_qpair_submit_request.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I5677d53965bdbd6d339c013483cdf42ce782099a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When using uring socket, we see following assert
nvme_tcp.c:1018: nvme_tcp_capsule_resp_hdr_handle:
Assertion `tcp_req->state == NVME_TCP_REQ_ACTIVE' failed.
Detailed info is in
https://ci.spdk.io/results/autotest-per-patch/builds/19205/archive/nvmf-tcp-vg-autotest/build.log
We face this issue, because there is also code execution ordering
between "sending callback function" and "pdu receving function".
We did not find it in physical machine testing, but finding it
in vagrant machine in CI.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I5eb241d564c0fc42ce0601b7c85999a2550f0de3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some OS(Windows and VMWARE esxi) will send SPC2 RESERVE/RELEASE
commands when formatting the filesystems, but in our previous
implementation of reservation feature, we didn't add such support,
in specification SPC3/4, they all include one section "Exceptions to
SPC-2 RESERVE and RELEASE behavior" feature for compatible support of
SCP2 RESERVE/RELEASE, so we add this support now.
Fix issue #1414.
Change-Id: I65d85ffb3b8f824b0ae4e130f53f01d95735d700
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Export iova-mode parameters in spdk which is useful in
VM environment.
Change-Id: I3f4756b2c3b6cf5d1964a50bbf63f9c596997696
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: It will be used to leverage the uring acceleration
later when we use io_uring_prep_write_fixed.
Because for using the Registered buffers feature in I/O uring,
we currently can register all the huge memories. And if we
allocate send_pdus in DMA memory, we can leverage such feature.
Change-Id: Id0ba5f7fe43202027c0378e9cbe74d861aad21e5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme_rdma_req_complete() and nvme_rdma_req_put() are called in a
row except a single case. Move clearing completion_flags and req
of rdma_req from nvme_rdma_req_put() to nvme_rdma_req_complete(),
and then inline nvme_rdma_req_put() because nvme_rdma_req_put()
does only insert now. To do this, change the type of the second
parameter of nvme_rdma_req_complete() from struct nvme_request
to struct spdk_nvme_rdma_req.
For the exceptional case that only nvme_rdma_req_put() is called,
change nvme_rdma_req_init() to clear rdma_req->req if returned with
error.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf7e6d245f3a48fb895cd9e6d92596ef833f26d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Each request has a callback context as cb_arg, and the callback to
nvme_complete_request() for the completed request may reuse the context
to the new request.
On the other hand, RDMA transport dequeues rdma_req from
rqpair->outstanding_reqs after calling nvme_complete_request() for
the request pointed by rdma_req.
Hence while nvme_complete_request() is executed, rqpair->outstanding_reqs
may have two requests which has the same callback context, the
completed request and the new submitted request.
The upcoming patch will search all requests whose cb_arg matches to
abort them. In the above case, the search may find two requests by
mistake.
To avoid such error, move dequeueing rdma_req from rqpair->outstanding_reqs
before calling nvme_request_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia183733f4a4cd4f85de17514ef3a884693910a05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Each request has a callback context as cb_arg, and the callback to
nvme_complete_request() for the completed request may reuse the context
to the new request.
On the other hand, nvme_pcie_qpair_complete_tracker() dequeues tr from
pqpair->outstanding_tr after calling nvme_complete_request() for the
request pointed by tr.
Hence while nvme_complete_request() is executed, pqpair->outstanding_tr
may have two requests which has the same callback context, the
completed request and the new submitted request.
The upcoming patch will search all requests whose cb_arg matches to
abort them. In the above case, the search may find two requests by
mistake.
To avoid such error, change nvme_pcie_qpair_complete_tracker() to
dequeue tr from pqpair->outstanding_tr before calling nvme_complete_request().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie9efc200d06d02d8ee2be3cb8e9fd64591bc210d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
req->qpair and qpair->ctrlr are set at their initialization, and
hence we don't have to store ctrlr to req->user_buffer but we can
get ctrlr simply from req->qpair->ctrlr.
Besides, save a local variable by overwriting qpair when it is NULL.
This is also a small clean up.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1cca763fbaae55079b38f7f16fcf779360232797
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2890
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
To reuse the code for the upcoming new function
spdk_nvme_ctrlr_cmd_abort_ext(), factor out the operation to submit
an abort request into an new helper function
_nvme_ctrlr_submit_abort_request().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id00bed8fb8dc15b77e3c7f19105c1623588faa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2494
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
ctrlr->outstanding_aborts is counted only for submitted abort requests.
However ctrlr->outstanding_aborts had been decremented for queued
abort requests by mistake.
Subsequent patches will use parent-children for abort requests but
nvme_free_request() is not aware of such relationship.
Queued abort requests had not been canceled or aborted when controller
was destructed. Retry submitting queued abort requests had been
repeated recursively and had caused stack overflow.
This patch fixes all.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ce0ae51ddd5ed3e1e8ac86329c8bdb7a9236b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To reuse the code for the upcoming new function
spdk_nvme_ctrlr_cmd_abort_ext(), factor out the operation to retry
queued abort into an new helper function nvme_ctrlr_retry_queued_abort().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56bdfefe2c54990c9fd0463303b3d65ccf6e8942
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK NVMe driver had processed ACL as 1's based value by mistake,
and SPDK NVMe-oF target sets ACL to 0. Hence If NVMe driver connects
to SPDK NVMe-oF transport, spdk_nvme_ctrlr_cmd_abort() always queued
abort request.
Fix this bug to process ACL as 0's based value in
spdk_nvme_ctrlr_cmd_abort(). Besides, initialize ACL explicitly to
0 in spdk_nvmf_ctrlr_identify_ctrlr() for clarification.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id4f3a469776cdab88bcc6f41e7893885a7b78d8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2513
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
When one of the children is failed to submit, if any children is
already submitted, the function can return success to wait for those children
to complete, but the parent should be set to failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ea53856ee58da991bceca0058d1e1f55d42af37
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
next->cpl should have been set if nvme_ctrlr_submit_admin_request()
failed in spdk_nvme_ctrlr_cmd_abort_cpl().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4114294e398b18148d8a9ad798a656a7686c5a85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2491
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
When io channel is being destroyed some of its write
buffer entries could still be a valid cache entry.
This patch evicts all entries during io channel destroy
to keep consistent l2p table.
fixes issue #1434
Change-Id: I4e1cd206102c1f565b0f3e2dc90b5c2b3ed3d28c
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch tries to solve the out of order
call back handling for cmd sending and the incoming pdu handling.
Normally, the cmd call back will be called before
receving the next PDU from the target if the application
uses the sync manner.
With the uring implementation, after sending the
cmd to the target, we may have the following scenerio:
(1) Firstly receive the incoming pdu(e.g., CapsuleResp pdu, C2hdata pdu)
due to the group polling read event.
(2) Secondly execute the callback function related with NVMe command sending.
This means that the data from the initiator is really sent out to the target,
and the target receives, then sending back the data to the initiator. But the
uring io_uring_cqe event is not handled, thus if we execute
(1) first, it will clean the data structures related with nvme_tcp_req, and the
nvme_tcp_req will be used for other purpose. Then causes wrong behaviour like
the following:
"Rand Write test failed at QD=128 because fio hangs with the following error:
nvme_tcp.c: 971:nvme_tcp_capsule_resp_hdr_handle: *ERROR*:
no tcp_req is found with cid=66 for tqpair=0x7f23d8001710".
And this patch can address this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I5043aaa8adf5033d93dedac15f633f0850e0b9f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2818
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If the vhost dev can't unregister successfully then we
leave the io channel and desc. In the bdev remove callback
we will free them or It would cause heap-use-after-free
issue.
Fix github issue: #1443
Change-Id: I09f4616e181d6657add3acef0ff92336fb9a9643
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2924
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These dependencies were removed in patches that added
RDMA provider. It was incorrect change since it causes
SEGFAULT when SPDK is built with shared libraries
Change-Id: I15f4ff86a75b3d080e1c7c89d75af4959c4ed989
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2900
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recently support for multiple AERs was added to lib/nvmf, but the fc
transport was not updated.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1755fdc4a6db2c6ce751c34fe5ad1d43e30298f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add to both accel framework and add sw engine implementation.
IDXD implementation and accel example app patches to follow.
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7df28518505f0d4bbb32cc8e69eb8a231fb29452
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icadae34a75c35e2db672a193287b147416012a5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This might be helpful if secondary processes cannot start due to
conflicts in address map.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I180dc09b4cad3b0064f009b0f553f5929de6566c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2776
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When read I/O to the controller failed, clear
rdma_req->num_outstanding_data_wr to zero to avoid
rqpair->current_send_depth goes to negative after completing data
transfer to the host.
This bug was apparent when the outstanding read I/O was aborted.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62e439f946ef81ea0b5de5280670ed97fe8d977f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2341
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
struct spdk_nvmf_fc_rq_buf_ls_request does not need to be marked
as packed. The static assert that immediately follows will catch
any inserted padding.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id11ac9865a9c60f6d147d0f829d272ca791d0336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2683
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The packed ring can supply up to 10% performance promotion.
Let's set the packed ring format as default.
Change-Id: Ie722417d20f3355769eefce4fec9831c60976e6f
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the operation function is not specified in spdk thread lib init.
Add a info logs to tell user that you should manage and poll the
thread.
Change-Id: I536c6954c129fbbbc2d19776866fa348d49688ee
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These returns at the end of functions, so remove them.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I1f54d812956727e1871f4879c8bc9a526d7d14c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The implementation of Calsoft case tc_login_29_1
is wrong. We should return "Irrelevant" to the initiator
when Session type is discovery.
Also also update the known failure test cases of
Calsoft.
Fixes 958.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I38cd2cf39bf80fd025ab74bc9dfe6ac412d01328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2846
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The plan is to push the logic that assigns qpairs to poll groups down
into the nvmf library. To do that, we'll need to have a list of the poll
groups.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iea59ac1a439dbd1bcae68fb2977a47a855884a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2811
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Include completion operation into nvmf_qpair_abort() and rename
it by nvmf_qpair_abort_aer() for clarification. Update unit test
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I763cc7d24b979e27e8775f4e69730466a2351bdf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2712
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvmf_ctrlr_abort_aer() has not been used anywhere, and so we may be
able to remove it, but let's update it to set the completion status
of the aborted AERs to ABORTED for future potential use cases, and
then rename it by nvmf_ctrlr_abort_all_aer() to avoid name conflict
with the next patch.
Setting the completion status to SUCCESS is not good in this case
anyway.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie49936429b82dd05724cf8f10a1417e9c5304635
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2709
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some cases need to redirect spdk_nvmf_request_complete() to the
thread pointed by qpair->group->thread. Abort command will be
included such cases but abort command is executed in the different
file ctrlr_bdev.c. For the convenience, change spdk_nvmf_request_complete()
to include the redirection and extract the core operation of
spdk_nvmf_request_complete() into a private function
_nvmf_request_complete(). In ctrlr.c, call _nvmf_request_complete()
for non-redirected cases.
Besides, locate the definition of _nvmf_request_complete() under the
definition of spdk_nvmf_request_complete() in a file to trick the format
check tool to avoid false positive, and fix a spell error together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I85546c80e99e01686c9470653e0ddafcf7c6a391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2115
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
'make clean' can't remove compiled file in virtio_user directory.
So I move vhost_user.c into lib/virtio directory and fix it.
Change-Id: Ic7d41709d3a5d6cf2333c4deee285800b414a3fb
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2750
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
`-r` and `--rpc-socket` command line options will now require
path for a UNIX domain domain socket. The socket can be still
exposed over TCP with external programs. Hence, for (some)
compatibility reasons, the test scripts, jsonrpc-client, and
rpc.py will still be able connect directly via TCP.
Change-Id: I22a935f1596ce5f9c313b5be42cb85f772368c03
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Cache size of mempool is not based on SPDK thread but DPDK thread,
i.e. CPU core. So replace spdk_thread_get_count() by
spdk_env_get_core_count() to determine cache size of mempool in
spdk_bdev_initialize().
Besides, allocate and free stub cores at the corresponding unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc4deae84c74820af4de61e991fa3f8683add058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using not FAILED but ABORTED for the completion status of the I/Os
aborted by reset will be reasonable and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c8181dd33453a330888cffa93505e6fc462f278
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_io is passed to the callback to the timeout I/O, but the context
of bdev_io is stored in cb_arg and spdk_bdev_abort() needs cb_arg.
Hence add an new helper function, spdk_bdev_io_get_cb_arg(), to get
cb_arg of bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5eb25ffdad2467c55a1b55f8cf0accef8799bb4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The last patch ensures that the parent I/O terminate with failure
before continuing splitting process if one of child I/O failed.
This simplifies abort operation for I/O splitting.
Then we can use bdev_abort() and bdev_abort_io() nestedly.
Add necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I562bb6675f1fa380bc53dbe369138317ead66fe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Previously, bdev_io_split_done() had continued splitting process
even if the status became failed. To abort split I/O, this patch
changes bdev_io_split_done() to terminate with failure before
continuing splitting process if the status became failed. Add
necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd1ea49c22523e8c06fb45ebdcb2c84a57afd2ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2234
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to abort split I/Os. To abort any I/O by
bio_cb_arg, they have to be managed by the submitted I/O list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9459d9d2d3511aad0325dcc20d88610444a4ea04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Buffer allocation is done after redirection to the QoS thread.
Hence add a new helper function bdev_abort_queued_io() and add
its call to bdev_io_do_submit() for both buf_need_small and
buf_need_large.
For zcopy API, buffer allocation is done before buffer allocation
but the caller can get bdev I/O object, and can abort the I/O
directly if needed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2d6170de5ab2ba4d260df99db3e376c0e2c5ffaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2250
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Current bdev_abort_buf_io() aborts all queued I/Os due to buffer
pool capacity, and we want to use the name for the new function
which aborts only the specified I/O if queued. So rename
bdev_abort_buf_io() by bdev_abort_all_buf_io() in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I50a4ef1f5c4d2f8db9a0781413520345a7f13e59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add abort queued I/O due to out of memory into bdev_io_do_submit().
Any bdev I/O is queued due to out of memory only on the submitted
channel.
Aborting queued I/O due to out of memory is necessary only if
shared_resource->nomem_io is not empty.
Checking if shared_resource->nomem_io is not empty has been done
in this function.
However add the abort operation without and before checking if
shared_resource->nomem_io is not empty because the following patch
will abort queued I/O due to buffer pool capacity.
The purpose is to improve readability by consolidating all abort
operations into a single place.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I69a40f096aff13b84c1ed345fa8bd0dd80cef0e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2249
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The following patch will add another spdk_bdev_io_complete() call
in _bdev_io_submit(). Then, factoring out set/clear in_submit flag,
incrementing counts and calling spdk_bdev_io_complete() into a helper
function will be simpler.
in_submit flag is set and clear in bdev_io_do_submit() anyway,
and bdev_qos_io_submit() needs in_submit flag only for
bdev_io_do_submit().
All cases to call spdk_bdev_io_complete() in _bdev_io_submit() are
not performance critical.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb783d7d001a9c36e61d791c664c67fdc46a09e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Current bdev_abort_queued_io() aborts all queued I/Os, and we
want to use the name for the new function which aborts only the
specified I/O if queued. So rename bdev_abort_queued_io() by
bdev_abort_all_queued_io() in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2125d91bffc870a0a4be4bb74037c1d27bce2d36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
The I/O aborted by the abort command should be completed with SC = 07h, i.e.,
"Command Abort Requested". However, if the generic bdev layer or non-NVMe
bdev module aborted the I/O, the aborted I/O would complete with SC = 06h, i.e.,
"Internal Error". To fix this unexpected behavior, add an new I/O status
SPDK_BDEV_IO_STATUS_ABORTED and update spdk_bdev_io_get_nvme_status() to
set SC to 07h if the I/O status is SPDK_BDEV_IO_STATUS_ABORTED.
If the NVMe bdev module aborts the I/O, the I/O status is set to
SPDK_BDEV_IO_STATUS_NVME_ERROR and SC is set as expected.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc99a97248a8d54a8c8d2fab74a90c7ce99c2e6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Having spdk_vhost_blk_get_dev required us to bump up the SO version
the vhost library when we updated bdev.h but spdk_vhost_blk_get_dev
has not been used publicly, and can be inlined very simply.
So remove spdk_vhost_blk_get_dev from include/spdk/vhost.h and inline
it to the place which had used it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98c233b81d7980d4e2c5bd3c0a65d747f183e1e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Make the initilaization in order.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I66962073a02b6a4c2fc79ac343cdf5310075dd63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having that transport can decide about particular ctrlr attributes not
globally but per ctrlr.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia3fb0d4e576cb9f8ce6df75f775e2fd5727d7f48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Useful for transport specific layer to inform that SGLs are not
supported or to adjust settings.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia849f5af206538408664fd20ea4e7dcb9da6f6f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tracing functions introduce performance overhead
so by default keep them only in debug builds.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I08e0a139c3efa87b0f46b7e7a026b0676f3e8634
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
spdk_nvme_cuse_update_namespaces() API allows application
to repopulate namespaces on NVMe CUSE devices.
Change-Id: I5375b13bcc91b17cd26b4dc6f02d83dc33826542
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/658
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
In append case checking if zone is not busy before
submitting to it is unnecessary. This patch improves
append performance.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I42f3b31815aa10aed6b0374c2247f857683822f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Patch below added writing out json configuration for accel modules.
(fad052b0) accel: add write_config json for accel modules
Out of two current modules, only idxd reported its confi out.
When idxd was not compiled in, then "framework_get_config accel"
RPC did not return a valid JSON. Following JSON was returned:
{\"jsonrpc\":\"2.0\",\"id\":1,\"result\":}
Where "result" never had any property given.
This patch adds array object to encompas all accel modules.
Next patch in series will try to address the issue on JSON
level.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0758db5406896f2a204920417619a3ab6fbde98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2550
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_sock_impl_get/set_opts functions allow to set different socket layer
configuration options. Options can be set independently for each
socket layer implementation.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I617e58366a153fae2cf0de1b271cc4f4f19ec451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/607
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is an important aspect of ABI versioning.
There was a change to the spdk_bdev_opts struct
which is accessible from the public API that results
in an ABI change.
There was also a change in the spdk_accel_module_if struct that
will affect new modules so its major version needs to be revved.
There was also a change in the publically accessible rmda_hooks
structure which forced an ABI change in the NVMe library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5cc6886fe01b4adc2836b6e15995471f0361dc29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is needed for shared completion queues which can still give us
successful completions on aborted requests if the qpair hasn't been
disconnected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I85cf1a81ef563d8c02d684b09d2f7ad5008e38cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1961
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When a request has been aborted, it's possible to get a completion
for an rdma request but the rdma_req->req object has already been
cleared to NULL.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5f7b1b96ff4be8c436aae9a7e2a7c9927d04e627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1960
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds a posibility to update cuse devices after cuse
device registration.
During NVMe controller life cycle there's a posibility to create
and delete namespaces with Namespace Manage feature from NVMe
spec 1.4.
To guarantee consistency, after changing the number of namespaces
NVMe CUSE devices must be repopulated after Namespace Manage
operation.
This patch introduces cuse_nvme_ctrl_update() entry point to allow
repopulate NVMe CUSE devices.
Change-Id: I478faae040027965321af585abfc34eaf35c908c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For now only controller to host transmition is implemented
for CUSE.
This patch separates cuse_nvme_admin_cmd_send() entry point
to be used to implement another transmition directions.
Change-Id: Ic9013a30c16cf71957c8b411ee00a43c7aa8bbb6
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function was removed from the public API last release
when the map file was introduced, but I didn't clean up
the name at that time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3101723b504531ce2c51dba2feb063511dd32684
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
I missed a few files in this library the first time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ad55355e6348eaa10384a148dd45deb9f68fc2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace inclusion of spdk/event.h by spdk/log.h in lib/accel/accel_engine.c.
There had been no dependency with SPDK event library.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8709b582747de932c1251635940e0aba54211c2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove inclusion of spdk/event.h from lib/bdev/bdev.c. Its dependency
had been removed before.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icfea104b20172e624574506a41fa92524ebc8627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove inclusion of spdk/event.h from SPDK NBD library. Its dependency
had been removed before.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I33d89ccc0c37417d658992a33c3ece793e658011
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK NVMe library. Their dependency had been removed before.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide3a0902b1cebb9c9033ade45d7488622e38696c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2688
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK nvmf library. Their dependency had been removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc6c52ab41555d9b29afc3e16c1c3fd0bf5fc63a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI library still needs to include SPDK event library only for
shared memory ID to allocate shared memory for iSCSI top application.
We will move the code to module library separately later but remove
all other inclusion of SPDK event library in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21d77b9cc00c6a1f512546a6a0202c8fa5623bed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the AER events in nvmf target from one to four.
Change-Id: Ie31988b49d68bdbc28ab2e09c783e681d3017e2b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2548
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This helps ensure thread safety on creation of the
netlink socket, when probe is called from multiple
threads at once. It is also a lot more clean - we just
create it once, rather than checking every time probe
is called to see if it has to be created.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I528cedc3ff44de6ea8ecaf6d2389226502ba408e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2681
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow spdk_nvme_probe and variants to be
called from multiple threads in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I534db605c9e192b943afe973981b7b503d8b7e34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will need to be done separately for poll groups.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0e432493bdb02e13fe5c73a8a09911cef573307b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1664
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This helps create a separation between processing a qpair and processing
a completion queue which can be shared across multiple qpairs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I111dd16ec4327854f232988a96891a65813f00e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1166
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the case, there are several ctrlr used, it's better to
have the traddr to indicate which ctrlr has the issue to
shutdown.
Change-Id: Ie564bb70566ba5822938efc99125d063f7b4ae4a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2588
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When VM shutdown there will be an error message 'VHOST_CONFIG: recvmsg failed' printed.
The return value of recvmsg will be 0 when the peer has performed an orderly shutdown,
or -1 if an error occurred. So adding logs to distinguish these two different situations
to avoid confusing and to hint accurately.
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Change-Id: Ia4b806a11d3c6ddf076c61d1caad4fa7b16fb9b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2557
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I found this flag weird while debugging a lvol with
thin provisioned Blob, so make it consistent with it's Blob.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Iae555020d5781dfcf4d4f072a47e9573d35b8705
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Using an inline function to decrease the aer notification code.
It also can benefit from adding new async events later.
Change-Id: Id0f7c57fd66ade303c625d1d1af10d41dead8994
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2547
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix potential bug. In nvmf_ctrlr_abort_on_pg(), when run into
the request_complete it can trigger this bug because in nvmf_qpair_abort
the ctrlr->aer_req was set to NULL.
Change-Id: I37a7e3c76c6616ca4ecbc6d9d2776ee32449c796
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2545
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add wrappers around the request and response values and track
those using the wr_id value.
This will come in handy when we start doing poll group based
completion processing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iaff75b03e41d49f53e55e0ce65d384567988fc9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1165
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we don't use SRQ and close a qpair, we will receive completions
with error status for all posted ibv_recv_wrs. This is expected and
we don't want to log an error, use debug severity in this case.
Fixes#1387
Change-Id: Ia8efb8f24628880454fab1d7f6188e7b31cffb67
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A wrong parameter is passed to memset when loading blob->active.clusters,
this leads to an unpredictable wrong lba value using thin provision LVOLs
while submitting IO requests, thus causes EIO error using QEMU vms.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Iecea80cfa58f7a025603430d666fd9cd4d3fea8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2431
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Hitting only the static functions from the above libraries
with the spdk_ prefix.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic6df38dfbeb53f0b1c30d350921f7216acba3170
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2362
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When starting the QEMU NVMe SSD with "cmb_size_mb=XX"
parameter, the controller memory buffer feature is
enabled in the Guest, the SPDK NVMe driver running
in the Guest will allocate the submission queue in
the controller memory buffer by default, it will use
memset and SSE instruction when copying NVMe command
to the submission queue entry or zero the whole
submission queue, inside the memset implementation
the AVX2 instuction will be used if the CPU can support
such feature. However, due to the limitation in the
QEMU, the maximum access width to the PCI BAR space is
set to 8 Bytes, SPDK will report illegal instruction
in Guest.
Here we add a quirk for the QEMU emulated NVMe.
Fix issue #1362.
Change-Id: Ib5e2e4198d39ce7f8455175f7db283db0b01eebf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2196
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Along with the sw engine back end implementation for it. IDXD
back end will follow, the use in the accel perf tool as part
of verify.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia1013cd884ff71990f898320d6a22e96e16ad2a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit 6d6052ac96.
This approach is no longer necessary given the patch immediately
preceeding this one.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I5aab14346fa5a14dbf33c94ffcf88b045cdb4999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2512
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_mem_reserve() function reserves a memory region in SPDK's
memory maps. This pre-allocates all of the required data structures
to hold memory address translations for that region without actually
populating the region.
After a region is reserved, calls to spdk_mem_register() for
addresses in that range will not require any internal memory
allocations. This is useful when overlaying a custom memory allocator
on top of SPDK's hugepage memory, such as tcmalloc.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia4e8a770e8b5c956814aa90e9119013356dfab46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2511
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As of now, all of the libraries and modules have their own
map file specified. Get rid of the generic top level one and
add a test to make sure that these files have been specified.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I329004e7442c7975731fc973455c93e724982952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2359
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This variable is only used in this function.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib1836662e8068f6a459ce8746b45b5dca08079e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2305
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Do not make attempt to resubmit failed send/recv WR, instead
report and error to the upper layer (in case of new request) or
fail a qpair (in case of active polling).
In the case of failed ibv_post_send and disabled `delay_cmd_submit`
nvme_rdma_qpair_submit_request returns an error to the caller.
The caller completes failed request but RDMA layer still keeps
it in a send queue. Later RDMA layer can send the corresponding
WR and notify the upper layer about the completion of the request
for the second time.
Change-Id: I1260f215b8523d39157a5cc3fda39cd4bd87c8ec
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1662
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Verbs implementation: doesn't differ from the original:
- send_wr: saves WRs in the qpair internal structure
- flush_wr: calls ibv_post_send
Direct Verbs implementation:
- send_wr: calls ibv_wr_start for the first WR;
Calls opcode-specific function to add a WQE to SQ
Tracks queued WRs to return a correct pointer to 'bad_wr'
- flush_wr: calls ibv_wr_complete - it flushes to the NIC
all WRs added between ibv_wr_start and ibv_wr_complete
Change-Id: I65a26914db688af20589f3b69a994d214d860726
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This patch adds use of RDMA provider API to NVMEoF initiator.
Makefiles have been updated with new RDMA lib dependency
Change-Id: Ieaefeb12ee9681d3db2b618c5cf0c54dc52230af
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch updates NVMF target to use RDMA provider API
to create and destroy qpairs.
Makefiles have been updated with new dependency on RDMA lib
Change-Id: Iae35aea601380f8d1a6453a7fd6115f781e126f5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RDMA provider is used as an abstraction layer and allows
to add vendor specific verbs implementation. This patch adds
an interface to create and destroy qpairs and its implementation
using regular verbs API.
Future patches will add functions to queue/flush Work Requests,
enable usage of RDMA providers API in NVMEoF target/initiator and
add Mellanox Direct Verbs implementation. This abstraction layer
is flexible enough to add other vendor's implementations.
The choice of a specific RDMA provider will be made at
the configuration step, it doesn't add any runtime overhead.
Change-Id: If8eec5bd45c82c71f73a14f6e84121cd02a1d65d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev_auto_examine flage will impact how bdev layer examine a
disk. If bdev_auto_examine is true, the bdev layer will examine all
bdevs as usual. If bdev_auto_examine is false, the bdev layer will
only examine a bdev if it is in a whitelist.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If5b26283905f97f8a95ae9065226fa3dae6c27a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2114
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Following patch made sure that CQ/SQ are allocated in
physically contiguous manner:
(64db67) nvme/pcie: make sure sq and cq are physically contiguous
Using MAX_IO_QUEUE_ENTRIES is enough to make sure that either
queue does not span multiple hugepages.
Yet the patch made sure that whole page is occupied only
by the queue. Which unnecessarily increases memory consumption
up to two hugepages per each qpair.
This patch changes it so that each queue alignment is limited
up to its size.
Changes in hugepages consumed when allocating io_qpair in hello_world
application:
io_queue_size Without patch With patch
256 8MiB 0MiB
1024 12MiB 4MiB
4096 24MiB 16MiB
Note: 0MiB means no new hugepages were required and qpair fits into
previously allocated hugepages (see all steps before io_qpair
allocation in hello_world).
Intersting result of this patch is that since we required alignment
up to the hugepage size this resulted in reserving even two 2MiB
hugepages to account for DPDK internal malloc trailing element.
See alloc_sz in try_expand_heap_primary() within malloc_heap.c
This patch not only reduces overall memory reserved for the
queues, but decreases increase in heap consumption on DPDK side.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I75bf86e93674b4822d8204df3fb99458dec61e9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2244
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the CRC function at the framework level and implement the
software engine back end to use ISAL. The patch series will continue
to include an option for accel_perf to test CRC as well as IDXD
implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4eff3bbcf98c0bc2928a48272a57031c8b96394e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2072
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Currently the new transport is dynamically allocated and looks like
not freed when the application exits. Trying to use the
__attribute__((destructor)) function to free the allocated memory,
it will not work in the case of user created thread as this function
is called right after the "main" function while other operations
may be still ongoing.
In this case, add a global array of transports.
Change-Id: I610b1e8114ba2e68abbd09ea5e02a9abce055e70
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2415
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some users of SPDK API, such as OCF,
may want to generate logs with arguments themselves.
In that case they would need to first create a buffer
and then pass that buffer as a single argument to spdk_log().
This change adds spdk_vlog() which accepts va_list as argument list,
so it is easier to use spdk_log().
Change-Id: Ie2a3ac481035a250fcd68d0f9b8292008ebb6fe0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1946
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allowing for custom crc32 polynomials isn't really within the scope
of SPDK. SPDK libraries have shifted over to using more optimized
versions of these functions wherever possible (e.g. ISA-L).
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie4837010874e957481dd00896389b38c842445e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2424
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In current implementation, lib/vhost assumes that it always runs
together with lib/event, and would call lib/event's functions in
vhost.c. This is not necessary and make program unable to
create/destroy vhost module without init/fini the whole spdk env. It
would cause problems when program runs with vhost and other spdk
components together.
In this patch, we remove the dependency of lib/vhost on lib/event by
adding a global vairable g_vhost_core_mask so that it could handle
core mask by itself.
Signed-off-by: Kyle Zhang <kyle@smartx.com>
Change-Id: I38ceb92ac39b6980955346fda41e968aaead863d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1204
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added blobid and metadata page number to the log.
Previously only number within particular blobs md chain
was displayed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8e881c5824c9d2eadca9f3ac8ee2ac9ffc0e5cae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2058
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When starting qemu with vhost-user-blk multiqueue(set num-queues to
more than 1), the vhost device will be started/stopped many times
(related to the queue num), as the vhost-user backend doesn't know the
exact number of queues used for this device.
The target have to stop and start the device once got a valid IO queue.
When stoping and starting the vhost device, the backend bdev io device
will be deleted and created repeatly.
If the backend bdev is a distribution system, the cost is large as the
network RTT.
In this patch, add a dummy_io_channel to hold a reference to the io
device, so that the io device will not be deleted.
Change-Id: I5737248ec52bee06342ff0873bb89fd0a51665c2
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2020
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There were 50 functions and 5 variables that were previously
exported in the library which are actually private symbols.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I08c47255cdefff5948c914b0782e872c28c27130
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2291
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When using spdk_nvmf_request_exec_fabrics() to connect one IO
queue, the qpair->ctrlr is null before this function, and the
qpair->ctrlr will be set to associate controller after the
connect, so it will check the sgroup->io_outstanding count,
then we can hit the assertion.
Change-Id: I747cbfd0541cd12286dab549cd02245aac54f2db
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2062
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rocksdb test file changed because
it relied on logs format by doing grep/cut,
so failed after format was changed by this patch.
Change-Id: I81b8747560d7c803faec1650a3ead042bee2508b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2023
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
All the file add/delete/reclaim actions are in the cache thread now,
so the cache lock isn't necessary now.
Change-Id: Ibccdede78444e39346659f9342bdf104594bc07f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1796
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
cache_free_buffers() was only used in the file deletion and unload, and
the file is also freed after that, so here we combine the cache free and
file free together and do the cache free in the cache thread.
Change-Id: I57e9a27c9a6467bcf6c85cd277db3b57e06c98e5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1795
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also poll thread in the UT to cover the thread context switch.
Change-Id: I3dc765b66aa707c36eb3913b3e0d2c1c3986e282
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1793
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The log_rpc library should have its own flag.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7cfe4c9136089e83bdf2730c727a6602ffbaf83e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2215
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are several functions in the internal header that
are only used in the library that have kept the spdk prefix.
Add those to the suppression file since nobody in practice will
be using them.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iae1666c6f0bb853e62b89858037a5cded38c9b66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2213
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While we are here, change SPDK_LOG_JSON_UTIL to SPDK_LOG_JSON
It fits better with the naming convention.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I12bc8a44acf3effc5effcbc40ef1ab9af6e52c6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While we are here, give the library an so suffix
which was missed when the library was initially
created.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I68929127bf672c0f2f7153f9716882d03151480e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use 20.04 reference build instead of 20.01.
Also updatethe NVMe-oF Makefile to reflect a change to the
ABI since 20.04 was released. This has to be done in the same
patch to keep the build from failing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3201f698ecb441021964debda760866dbbc01a64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
One of these warnings, such as:
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c: In function ‘nvme_rdma_qpair_submit_request’:
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c:1512:29: warning: ‘lkey’ may be used uninitialized in this function [-Wmaybe-uninitialized]
rdma_req->send_sgl[1].lkey = lkey;
^
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c:1480:11: note: ‘lkey’ was declared here
uint32_t lkey;
^
Change-Id: I67b25cb62c7a0d5b298ebfe7d2673b73261040ef
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2197
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_ERRLOG() uses spdk_log() procedure which is
customizable and redirectable, so it is preffered over fprintf.
It also prints source location which is useful.
Change-Id: I27574be4a774169f356ebd8dcdfd2a33a057f051
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1943
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In spdk_log() accept filename = NULL.
If filename is NULL then source information as well
as log level is not displayed.
This change allows to replace all usages of
printf() and fprintf(stderr,) by
SPDK_PRINTF() and SPDK_ERRLOG() which use spdk_log().
Using spdk_log() instead of printf() is always prefered
since SPDK can be used inside of another application
where SPDK logs could be redirected.
SPDK uses printf()
places where location info is not needed
we cannot replace it by SPDK_NOTICELOG().
This change is in the scope earlier planned task:
https://trello.com/c/lZzBjrw3/10-remove-use-of-printf-fprintf-and-perror-for-logging-in-library-code
Change-Id: I55c24da4a2092bd118fa2c121092d253cedb1cf8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1942
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prior to adding more operations, make this a bit more efficient.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I02b864f998800c25076233183840bba8bff92196
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2069
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add both the plumbing in the engine to call module entry
points if they exist as well as the json write config
for idxd (the only module with config info at this time).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I91376d3fc60227cd79fae17b164722619eafb9e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2052
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe spec defines "Keep Alive Timer" feature ID as optional and there
are targets that do not support this. SPDK fails to connect to such
targets.
This patch allows Get Feature "Keep Alive" target to fail with
INVALID_FIELD status. In this case we just continue with keep alive
timer value stored in controller opts structure. This value is already
communicated to target in CONNECT command.
Fixes#1328
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I52e7ea3cb66073ce6cc168a169989bd179041618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobid and md_page is claimed as first step of blob creation.
If blob creation failed, both should returned to be used by
other blobs.
This caused multiple reports of:
"Metadata page 1 crc mismatch"
when loading blobstore due to md_pages not actually containing
the written out md pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I495452c578d879f749281cebf8975eb2c1c7f79a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2057
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In SPDK NVMe/TCP target, when initializing the socket, the low
watermark is set to sizeof(struct spdk_nvme_tcp_common_pdu_hdr),
which is 24 bytes. In our testing, some times there might be very
small data packet (as small as 16 bytes) be sent to wire. After
this, if there is no more data sent to the same socket, this small
data packet won’t be received by NVMe/TCP controller qpair thread
because the size hasn’t reached the low watermark. Because of this,
the qpair thread is waiting for more data come in and the initiator
is waiting for the IO request to be completed. Hence the delay
happens.
As the minimum data that allows target to determine the PDU type is
sizeof(struct spdk_nvme_tcp_common_pdu_hdr), which is 8 bytes, we
changed low watermark setting as below. With the change, the problem
was gone immediately.
Change-Id: I14ccc4c84b77e33a617726e7455304aca29d5d57
Signed-off-by: Wenhua Liu <liuw@vmware.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2138
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
reduce library uses unlink, but the unit tests need to
override it in a specific way.
But linking unit tests with LTO requires the wrapper
definitions be in objects/libraries listed *after*
the object/library that refers to it. So we need to
make the unlink wrapper somewhat generic. We do this
by exporting a string and callback function that the
user can set to enable a user-defined function to be
called when unlink() is called with a specific file
name.
Also revert 3ef6d06 as part of this patch, since we
no longer require the workaround that it implemented.
Fixes issue #1357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ee4c424ad31fe7d91d7b524ed47aedd279e5b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This typedef is already in the public header file.
clang complains about the redefinition, even though
it is identical.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iae10b6b752c25cedfe80275990a74cea9d5e0ae0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2135
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch also implements the new API for the 3 existing engines.
There was also some minor clean in one file, moving a function to
eliminate multiple forward declarations (there would have been
another one with this new API).
The next patch will use this API in the accel perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4ebc9cb3d1c588919235b5080cbeec29189efa21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2025
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since ftl write buffers are associated with IO channels
there can be situation that block that is being relocating
could be still in cache. Such scenario is very likely when
ftl is throttling user IO. l2p update should handle such
situation when data is coming from relocation.
Change-Id: Id0bb53d8ce45213b05bafa9ebcb843ce8eadbc7a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1439
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Zone in full state should have write pointer set to
the last block plus one to be consistent with internal
ftl write pointer tracking.
Change-Id: Ib81124e7a8451f8daec82d3d41dc55f6ed328ba2
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
OCF relies on our env to get information about free memory.
It then uses that information to return a descriptive
error if not enough memory is available.
But no other calculation done based on that value.
Our implementation was not correct because it returned
the size of available physical memory in the system,
while we use HUGEPAGE memory for most of OCF operations.
There doesn't seem to be a reliant API for getting
the size of available HUGEPAGE memory, so instead
return UINT64_MAX, as it is done in ocf/env/posix/ocf_env.h.
This way, OCF will not know ahead of time if there
is enough memory available, but it will still fail
properly on operations that require too much memory.
Change-Id: Iec2e3cfa8453253513d5861d7e6acf0e08dad1e9
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1976
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the vdev is marked for hotremove, it is possible that the
name has already been freed resulting in a heap use after free,
so remove the warning about a vdev being marked for hotremove
to avoid a segfault when removing a device.
This was observed in the vhost fuzz tests.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2891ca2bee70d72fb7b0dff96d569e9b92fe84eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2071
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
While in practice the qpair->ctrlr variable will not change within
the disconnect function, when the code is built without debug enabled,
gcc thinks that rctrlr may be uninitialized.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I355cd62f3a2baaba65d806e3746f615a0dc37f58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2056
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Useful for transport specific layer to inform that Keep Alive is not
supported or to adjust granularity.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I636fda3eadcb96cd8a4b79570fc4e3cc6a58fe93
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_conf_allocate() was not the best place to put
INI deprecation warning.
Depending on the application, config could be allocated
without passing config file.
This resulted in app framework applications to print
this error on startup even without config file.
Much better place is spdk_conf_read() which requires
a file to be passed. Then and only then, deprecation
warning is printed with this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I75979655880f9273dfe5ce65262f08934df596cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2051
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This needs to be done for all qpairs in the poll group.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic3a84713a3f9941f90613152328d06ac8c1f586b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1954
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Operation of locating right lba from cluster map
is done on I/O path. Instead of division and multiplication,
perform bit shift operation.
Bit shift is only used when pages per cluster is power of 2.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic3ed7ec0a82867a8a4bc6391785b9d40c800aacb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For the NVMe interface virtualization, we are developing the
MUSER as the replacement for vhost_nvme target, before the
MUSER solution be merged to SPDK, here we still maintain
vhost_nvme for the coming 20.04 release.
Change-Id: Ife117474330bf9e3fab1071dae2beb0f6897dff8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1936
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If we fail to allocate all of the params, we should free
the ones we did.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0f0be6320b27211e3713d9b79b5a0b0ed103e7d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
In practice, the reactor pointers will never be NULL
in these cases, but some static analysis tools don't
realize that.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0657959e5572df2741398b179907f2bbf0b02b3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
spdk_scsi_dev_get_lun will never return null when we
ask for lun 0, but some static analysis tools complain.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I09aa8e03c28f1a3448f68d6f4d9aa6e7003c4c1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
We were referencing the response before checking if it was NULL.
fix kw warning #10387
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I333d13a8f16874a35d7de8e6659125f3bee83c13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1980
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
g_spdk_iscsi_opts is encapsulated and not directly accessed by outside
of iSCSI library. So do not add it to the map file of iSCSI library
and remove it from the map file of the shared build
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9202891813208329ec6b3b0e076e4f608a38ef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Multiple nmvme_io_msg producers on the ctrlr share the same ring.
After freeing it, it should be set to NULL. In order to prevent
either nvme_io_msg_ctrlr_detach() or spdk_nvme_io_msg_process()
from interacting on freed memory.
Above happened when resolving issues in later patches.
After their respective fixes, there is no scenario that
solely reproduces this failure so no tests were added in this
patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I72b695d995b63bd002cc03e60cd4bdc82cfbe8ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1917
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This buffer was not released after failure to enqueue.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If84317c67626a3193851c90be056b8550a5fccee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1916
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previous to this change it was possible to register
same nvme_io_msg_producer twice. This kind of functionality does
not make sense in current scope of it, as each message to/from
io_msg_producer does not have identifier other than this pointer.
In case of nvme_cuse this allowed creation of multiple /dev/spdk/nvme*
devices and caused an infinite loop when detaching an nvme controller.
This patch disallows that and adds test for nvme_cuse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5f56548d1bce878417323c12909d6970416d2020
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adjusts several return codes to provide
more than just -1.
Along with fix to json rpc error print,
where negative error code was passed to spdk_strerror().
Resulting in unkown error being reported.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I254f6d716d0ce587f88cc658163ba049378f3b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1915
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no indication right now that this function couldn't be called
by multiple threads on different controllers. However, internally it is
using two globals that can become corrupted if the user were to do this.
Put a lock around them so it is safe.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I59361f510eb1659c2346f1fd33c375add1dc9c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1903
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds nvme_cuse_get_cuse_ctrlr_device() and
nvme_cuse_get_cuse_ns_device that returns
struct cuse_device of a given nvme controller or namespace.
Similar iteration was used in two places so they were
replaced accordingly.
Next patch will add third.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I25ada843a59c632fe330263a65456d25c5ccf4cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Docs, RPC, unit tests, etc., will follow. Notes:
* The current implementation will only work with VFIO.
* The current implementation supports only the existing accel
framework API. The API will be expanded for DSA exclusive features
in a subsequent patch.
* SW is required to manage flow control, to not over-run the work queues.
This is provided in the accel plug-in module. The upper layers use public
API to manage this.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels will see the ring sizes increase. This is done from upper layers
via public API into the lib.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifaa39935107206a2d990cec992854675e5502057
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1722
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Module, etc., will follow. Notes:
* IDXD is an Intel silicon feature available in future Intel CPUs.
Initial development is being done on a simulator. Once HW is
available and the code fully tested the experimental label will be
lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
* The current implementation will only work with VFIO.
* DSA has a number of engines that can be grouped based on application
need such as type of memory being served or QoS. Engines are processing
units and are assigned to groups. Work queues are on device structures
that act as front-end groups for queueing descriptors. Full details on
what is configurable & how will come in later doc patches.
* There is a finite number of work queue slots that are divided amongst
the number of desired work queues in some fashion (ie evenly).
* SW (outside of the idxd lib) is required to manage flow control, to not
over-run the work queues.This is provided in the accel plug-in module.
The upper layers use public API to manage this.
* Work queue submissions are done with a 64 byte atomic instruction
* The design here creates a set of descriptor rings per channel that match
the size of the work queues. Then, an spdk_bit_array is used to make sure
we don't overrun a queue. If there are not slots available, the operation
is put on a linked list to be retried later from the poller.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels with see the ring sizes increase. This is done from upper layers
via public API into the lib.
* The sim has 64 total work queue entries (WQE) that get dolled out to the
work queues (WQ) evenly.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch fixes the bug in
commit d421876f98.
We had passed not xconn but conn caressly by mistake to
_iscsi_conn_drop().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc2313923bc0e94b967e4ba2eca4255ddcc4611b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1988
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is executed on hot path for I/O. Inline it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ded0dd3c15e81954350a9eb372156e9d38f87e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is really useful when the intent of failing the qpair is to
do something like fail over to a different controller structure
and we want back completions for everything outstanding from the
admin queue.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icbfdf855ddb1a380da7b9036ab5da6faab862e00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1815
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By aborting all requests from every qpair when it is disconnected,
we can completely avoid having to abort requests when we enable the
qpair since nothing will be left enabled.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iba3bd866405dd182b72285def0843c9809f6500e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1788
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the onlyreasonable thing to do. Plus we need to
be in the destroying or disconnecting state to avoid
an infinite loop when aborting requests.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I38462a01f0455c3d6496434626f6f2f4663bf508
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1857
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we destroy a qpair, we need to flush all of the I/O.
But some applications will try to resubmit that I/O. We need
to not re-queue those I/O while in the context of the destroy
call so as to avoid an infinite loop.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3e4863a563d461092f6e6b4a893f965f41bf34e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1856
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can cause infinite loops if the callback tries to
queue an additional I/O.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4b80b97d334082465d9228b799ef901645fa968e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1854
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The state should be changed and checked by the transport
layer. All transports should follow the same list of steps
when disconnecting/reconnecting.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If2647624345f2c70f78a20bba4e2206d2762f120
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1853
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The qpair states should be maintained at the generic level.
Always going through the transport disconnect function is
one step in that direction.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I019b2b4a14fe192eff5293f918d633dde2c5400a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1851
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable really indicates when a qpair is
no longer connected. So NVME_QPAIR_DISCONNECTED is
actually much more accurate.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia480d94f795bb0d8f5b4eff9f2857d6fe8ea1b34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Updating conn->state had not been guarded by any mutex. When SPDK
iSCSI target has multiple SPDK threads, iscsi_drop_conns() may update
conn->state by a thread different from the thread of conn->pg.
This patch ensures conn->state is updated by the thread of conn->pg
by sending a message to the thread.
This fix is not perfect but connection reschedule is done only once
per connection when moving to the full feature phase. So this fix
will be simple and enough for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I500474a27659438473b0eea598d35c90624a1d10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1930
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This allows us to hide the implementations of
g_subsystems and s_subsystems_deps within the
libraries themselves.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I60716b9465b58d6cdb3a43262a7ded844bd80eda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1786
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is part of a larger effort to remove the g_subsystems and
g_subsystems_deps variables from the spdk_event map file. The
implementation of those variables should be internal to the
library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3c2c04933859c6c484a903e666df10f810b26709
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were 9 function symbols removed from the global list
of the library. They were all symbols declared in env_internal.h
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I23210f27dc2bf23ae9e9cf76babb54e623fbc917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1708
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This should help reduce confusion within libraries about
which APIs are public and which are private.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7755081b016f269d4761d8cc2ce4bac2835c077d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1703
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, increment the library version since some non-public symbols have been removed.
Please note, SPDK_LOG_BLOBFS is included in the map file because it is used by the
blobfs_bdev module.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib05c0b6630951d97b1a5b2931746471eeb9d9630
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1702
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Deprecating INI tyle configuration has been a long time coming.
Feature parity is there between JSON-RPC and INI, which should
enable the switch.
All major applications support the JSON-RPC and tests were
moved to the JSON-RPC.
With above in place, it is time to give an explicit notification
to INI config users regarding the lack of support for INI.
In future release the INI configuration will be removed,
until then feedback from users is welcome on any
suggestions how to make the transition smoother.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If47375371791646f2afd06762b9bf6c5b8e009ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: Fix the unbalanced allocation of socket connection.
Suppose we have 4 spdk threads, then there will be 4 sock groups,
each on one spdk thread. And When using the NAPI_ID, each
sock group will be responsible for one NAPI_ID.
For example,
Poll group: A, B, C, D,
connection with NAPI_ID: 0, 1, 2, 3.
However if connection with NAPI_ID 2 exits first, and we will allocate
socket A (with the roundrobin manner, But not C again). So to avoid
this, we choose lazy free.
Since when the sock poling group is close, it will free them
finally in spdk_sock_remove_sock_group_from_map_table. So
there is no memeory leak, but eliminates unnecessary allocation/dellocation
on spdk_sock_placement_id_entry.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9bbc9139c8f8f3999eab7cd9259db2d683bd8466
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1873
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is called on hot path for I/O, inline it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iec40033eac19f2c66c2984623acb5e157a5ffe05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Commit 9ad044c4 remove the offset parameter in nvme_pcie_ctrlr_alloc_cmb()
and uses spdk_vtophys() to get the physical address of the submission
queue, however, the memory isn't registered to SPDK yet, so use the
offset to get the physical address again.
Change-Id: Ida0f4a8bf1e72d6446fba442a1b71f0ddaab4bb8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1933
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Hit assert when completion is done is response to internal connect
cmd. Fix by outstanding counter incr, add missing err handling.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2ba71f83432831fc043f2b6f6a5cba024045068b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1902
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When iterating SGL segment, we can use existing virt_addr parameter
to return UINT64_MAX as a special value to indicate this segment need
to be described as Bit Bucket SGL.
Currently only READ command is supported, we can enable the WRITE
and COMPARE support when necessary.
Change-Id: I50aa2b226ec3449c13ed1d97b3224ee8e7de95a8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1467
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the request contains separate metadata buffer, we should set
PSDT 10b when hardware SGL is supported and dword alignment is
required. SPDK driver doesn't provide SGL metadata data buffer
APIs for now, the separate metadata buffer is alway contiguous,
so we can put the metadata buffer into a data block SGL entry.
Change-Id: I9ccfce755a3169cd2c9b908e4da76081155d9613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1466
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The rdma_disconnect call triggers an RDMA_CM_EVENT_DISCONNECTED
message on the target side. The hope is that the target side will
reply with the same message in a reasonable amount of time. If the
target doesn't have that mechanism implemented, print an error message
and continue with the process.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I164a3538714fa3adfc306ea0c88220ea710e7c39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1879
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This also lets us get rid of the set_ibv_state function
since rdma_disconnect does the transition to the error
state for us.
rdma_disconnect triggers an RDMA_CM_EVENT_DISCONNECT on the
initiator side. This is important so we know when qpair ids
can be reused on the initiator side.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I87b80797c84ffa1d2cbe94cf37316b1b674b6c74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1878
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As soon as we disconnect the qpair, the initiator can submit an
additional request to connect a qpair with the same qid as the
one we connected.
This series is aimed at making sure we don't acknowledge a disconnect
until we have cleared that bit.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I76d9312448a9740911465c146a195996cc567370
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Historically, we have immediately called the qpair
fini function directly from _spdk_nvmf_qpair_destroy.
However, to fix a race with initiators where we can get
a duplicate QID from the initiator, we will have to clear
the QID bit before calling qpair_fini. Clearing the QID bit
must be done on the controller thread, so we have to pass at
least two messages between calling _spdk_nvmf_qpair_destroy
and qpair_fini. This leaves a gap where we can poll the poll group
and reap completions for the qpair before we call qpair_fini and drain
all of the requests related with the qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I337a0608f88fdda132b8a629a508c0263d2261c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As other small change, function iscsi_conn_pdu_generic_complete()
had been declared in conn.h but defined in iscsi.c. Move the
definition of it to iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bd796288036f78a7cba8a1c0af93bd6bc19e9cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1890
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_iscsi_tgt_node_reset() is not implemented and the code to
call it is commented out. We will have to implement them from scratch
if we do. So remove them in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63618b0f8857cb23b57f5a92ec363a91c1d5a912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1885
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
The following patch will remove the "spdk_" prefix from iSCSI
internal APIs. The iSCSI global data g_spdk_iscsi is also local in
SPDK iSCSI library. Hence rename it by g_iscsi for consistency.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If35e9d58b1388fd725a505ee9be870e414c37ba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
New OCF version is ready, so update our submodule.
There were a lot of API changes so
we need to adjust our bdev/ocf and lib/ocf_env code.
Description of code changes:
- env: added small functions like ENV_BUILD_BUG_ON, env_vzalloc_flags
- env: added "destroy" method for all locks
- env: added "execution context" interface
- cache/core "id" field made private
- signature of "ocf_io_configure" changed
- "io->volume" field made private
List of changes to OCF is available at
https://github.com/Open-CAS/ocf/releases
But no new features were implemented for our
OCF module since 19.6
Change-Id: I1ac2b6db0aad2a9840e4fa73d65608c5638fcb23
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1801
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some of the locks implementation in our OCF env
is different from suggested posix implementation (ocf/env/posix),
which leads to deadlocks in OCF v20.3
This patch copies correct implemention from example
posix env.
Change-Id: Ib3bb1cf3532b9e5ebc450a1569c620d95efe6704
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1867
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
alloc functions
Make the signature look more like spdk_dma_malloc and family.
Change-Id: I6a31acf3b9edd136924b6e53b9a23c699429b9dc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Separate these two operations into different functions. It is
possible that a CMB may not be visible from the CPU, but still
be present and have data transferred to it by some other DMA
engine. Generalize the API to handle that case.
Change-Id: Ifcd282af0db734fe4a6ef2283ae8e8933d017809
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only need to register the memory for the CMB if the user
plans to map it for use with data. Delay the operation until then.
This also gives us a way to support unmapping the CMB.
Change-Id: I6121ae2cc3f6f44efae8b52b6582ff9f68432bc8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/786
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Remove spdk_ prefix from the name of internal APIs.
Add single underscore as the prefix of the function name to the
private functions if we see any conflict as a result of this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If0eabffbdb750db02866c1aa2b29b0c89fab1040
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We have an unofficial naming convention that the
spdk_ namespace is reserved for public API functions only.
This patch is attempting to bring the blob library into compliance
with that naming convention.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie298e41d1b741dae01744826c208378ee60f9d0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Also update the so minor version. Apparently spdk_bdev_module_list_find
was not declared global even though it matches the spdk_* regex for the
generic spdk map file. My guess is this is because it isn't actually
used in any file other than bdev.c even though it is declared in
include/bdev_module.h
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5c4e9ed06130e5d1dcc7235b5c2588f7b98a3ab3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Both for SCSI IO task and management task, append and execute
operations bad bbeen separated into different functions.
Append operation was for LUN reset, and separating into two different
functions was for clarification and readability.
LUN reset is sufficiently stable now.
Merging append and execute SCSI task into a single function is good
as API and enables us to do optimization.
For SCSI management task, merge spdk_scsi_lun_append_mgmt_task into
spdk_scsi_lun_execute_mgmt_task() simply.
For SCSI IO task, merge spdk_scsi_lun_append_task into
spdk_scsi_lun_execute_task() and do a small optimization.
The refined spdk_scsi_lun_execute_task() adds the IO task to the
pending list if there is any pending management task, executes all
existing penging IO tasks first and then the IO task if there is any
pending IO task, or executes the IO task directly otherwise.
Update unit test accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I26ffc4f4f62747d8cdecb90690f26cd58a9c17f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Inline _scsi_lun_execute_mgmt_task() into the caller function
spdk_scsi_lun_execute_mgmt_task() as another preparation to the following
patches to avoid using double underscores as the prefix of the
function name.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3c282fff133dfe7afc70c374a2186c14d1eb766c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the following patches to optimize task
submission and remove the spdk_prefix from internal or private
functions.
To avoid using double underscores as the prefix of the function name,
separate pending task check and outstanding task check into
different functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieda54507bf4c781b60fa05d03cd32ca25948e430
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can remove the device lock from now because all the APIs are executed
base on session, the controller can return error if there are multiple
sessions, actually most drives can only support one active session.
Change-Id: I9d5f4dc01a50ec95ef97b38c9e079ef95f37e4de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
opal_send_recv() is a wrapper implementation to use the asynchronous
security send/receive APIs, it can be used in a session context, but
from the view of one session, the opal_send_recv() is still executed
synchronously, but if the drive can support more than one session,
opal_send_recv() can be called from different sessions or threads.
Change-Id: I3a4b2ec14cb7706c39565a6b4fb8a3a4862f3d4c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
opal_cmd_finalize() is part of OPAL command construction, so move it
to the common password construction function.
Change-Id: I65ecf1c9181e622f344f7e9284058e2472accd31
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1669
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also rename it with *build* which is more meaningful.
Change-Id: I6e81e1b641ffdd04a7420e93e67448dc430f5168
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
Update vhost blk contruct rpc, make it enable to
support packed ring feature.
Change-Id: Ia1f75e72e8441e8d82fad89073e4875f89e5b9cd
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support the packed ring for the blk backend.The relative
APIs has been submitted to the DPDK upstream and merged.
About the packed ring see below:
https://docs.oasis-open.org/virtio/virtio/v1.1/csprd01/virtio-v1.1-csprd01.html#x1-610007
Change-Id: I43488604bf18d40a14c76b95206e07db76a14c0d
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/759
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the packed ring operations in spdk vhost.
Change-Id: I25c9701aadbb283f8f3ecccf599a863395d1c7f0
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the packed ring support in spdk vhost.
Negotiate packed ring feature when start device.
Change-Id: Idef50a1426b6e38d789d8c6982a3ed7594e32cf5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When the size of input buffer is larger than 16 and not divisible
by 16, the final line will keep part of the characters of the last
line. For example, if I want to dump "spdk dump 16 more chars",the
output is:
00000000 "hexadecimal" spdk dump 16 mor
00000010 "hexadecimal" e charsmp 16 mor
But the correct should be:
00000000 "hexadecimal" spdk dump 16 mor
00000010 "hexadecimal" e chars
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Iaf3f33c5ce68920ada83c59277f89a547e8030d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should be giving completions for all requests when we destroy a qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I802f5120f2e8289aa825872f8085ac21b5fce0f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
That is done to make sure that scenario described in github
issue #1292 won't happen
Change-Id: Ie2ad001da701e25ef984ae57da850fb84d51b734
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In some situations we may get a completion of RDMA_RECV before
completion of RDMA_SEND and this can lead to a bug described in #1292
To avoid such situations we must complete nvme_request only when
we received both RMDA_RECV and RDMA_SEND completions.
Add a new field to spdk_nvme_rdma_req to store response idx -
it is used to complete nvme request when RDMA_RECV was completed
before RDMA_SEND
Repost RDMA_RECV when both RDMA_SEND and RDMA_RECV are completed
Side changes: change type of spdk_nvme_rdma_req::id to uint16_t,
repack struct nvme_rdma_qpair
Fixes#1292
Change-Id: Ie51fbbba425acf37c306c5af031479bc9de08955
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1770
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add scsi_blk_init function to replace the common
code of task initlization. The same to process_vq
function.
Change-Id: Ied0582ad7f087990c581e6e7aacde6ec201964dc
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1613
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe ctrlr init state machine shall be async whenever possible so it
is not blocking other code from processing. It can result in deadlock
when cmd producer and consumer are sharing the same thread.
This patch is making identify active ns async by introducing new
state to wait for completions.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I346d35bab4733d3941e023602854fdd5b1ef23b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
It is a prework for changes related to ctrlr init state machine.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If289580f65ae27468b659a7ea07a4e4298876e77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
The timeout is designed for REVERT action, the REVERT needs
even several minutes based on different drives. Due to the
REVERT is low level API, it does need a response from the drive,
even we returned the timeout to the user, the drive is still in
the REVERT state, and it can't be used anymore, so the timeout
here doesn't help anything, just remove it.
Change-Id: I8f5119630d52f40e5bacea8ef8f3c771ee001aeb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1665
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also rename them to security send/recv to reflect the fact.
Change-Id: Icdeb7f15849a9d1aacf5936c5954bb39875f4cd9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1651
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Function opal_cmd_finalize() is OPAL command related, it's
part of the OPAL command construction, and opal_send_recv()
is low level security send/receive channel, so it's better
to use them separately.
Change-Id: I0648585726d5caa7b37a4bc6783bcb870c028bd2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1650
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the OPAL library uses the global session which
is OK, because the drive can only support 1 session, for
now, we can change the code to use allocated session, this
can make the library to be used in asynchronous way.
Change-Id: Ie033f905bd41c1171b8222d59925dc25729df84e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1649
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function inside opal_finalize_and_send() will be executed
synchronously, so remove the callback will make the code more
clear. Also rename the completion function with "_done" suffix.
No code logic change from this patch.
Change-Id: I03c5875457e52009768410ad29a89730a7df1c8b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1648
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently run count of poller has been incremented per execution.
It will be helpful for us to know how poller is busy by adding busy
count which is incremented only when some work is done.
spdk_thread_poll() has used the same timestamp in it, and so this is
the maximum we can do for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0adfbf9a62c959499978124ecc97d377c96c3769
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set 5 seconds timeout to wait until exiting thread is exited into
spdk_thread_poll(). After the timeout, collect error log and then
move the thread to exited forcefully.
Add necessary unit test case accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied8f58a2023a3bbe098530810fd3288bef93c3e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extract _spdk_thread_exit() from spdk_thread_exit() and
_spdk_thread_poll() calls _spdk_thread_exit() if the thread is in
the exiting state. spdk_thread_exit() changes to move the state to
the exiting state. The spdk_thread_poll() loop will end after the
thread moves to the exited state because the caller of
spdk_thread_poll() will check if the thread is in the exited state,
and break the loop if true.
If the user does not call spdk_thread_exit() explicitly, the reactor
has to terminate all existing threads at its shutdown. In this case,
multiple threads may have some dependency to release I/O channels or
unregister pollers. So the reactor has the large two loops, the first
loop calls spdk_thread_exit() on all threads, the second loop calls
spdk_thread_destroy() if exited or spdk_thread_poll() otherwise for
each thread until all threads are destroyed.
Besides, change the return value of spdk_thread_exit() to return
always 0. Keep it for ABI compatibility. Change ERRLOG to INFOLOG
for _spdk_thread_exit() because it is called repeatedly now. Remove
the check of I/O reference count from _spdk_thread_exit() because
_free_thread() cannot free I/O channel. Refine the unit test
accordingly.
Fixes issue #1288.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee5fb984a96bfac53110fe991dd994ded31dffa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add enum spdk_thread_state made of RUNNING, EXITING, and EXITED, and
the current state to struct spdk_thread.
The state EXITING is not actually used in this patch yet.
Replace the flag exit simply by the state EXITED.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6e5dc7184d50ae6d00e6ba00f5e2cf6045e5d48d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change spdk_thread_exit() to nest a wrapper function, spdk_thread_exit()
and a static function made of function body. Include the check if the
state is running into the wrapper function.
These will make the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I81a57407acb772cd869819f2fac6665f61935369
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the caller had to check if thread is not exited when
it calls spdk_thread_exit().
Subsequent patches will change return type of spdk_thread_exit()
to void, and so include the check int spdk_thread_exit() in this
patch.
If spdk_thread_exit() is called when the thread is already exited,
collect INFOLOG and return normally.
This will make the next patch a little easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8b94261575e770485b33c0b37e76e770b77b417c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The code used to do this but it was removed when the buffering was
shifted down to the posix layer. Add a way for users of sockets
to still properly size the buffers.
This also means that by default, the receive buffering is not enabled
on sockets. That matches the behavior of the previous release.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I20ce875be2efd841fe3a900047b4655a317d7799
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1560
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's actually faster to process them until you run out of data.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9e81babdb9bdc405a8dbf03b2f701fe50bcc70f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1559
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently nvme_completion_poll_status object is allocated using
malloc, so it may cotnain some garbage. In some scenarious
nvme_completion_poll_cb can be triggered before we enter
spdk_nvme_wait_for_completion_*. In that case status object
will be freed by nvme_completion_poll_cb if it contains a
garbage in `timed_out` field. Later spdk_nvme_wait_for_completion
will work with already freed memory.
Fix - allocate nvme_completion_poll_status object using
calloc and explicitly zerofy it before usage
Fixes#1292
Change-Id: Iac39653a6cd102471de16e65814f0760bbeda7d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This API will allow us to simplify the polling mechanism for qpairs on a single
thread. It also will pave the way for doing transport specific aggregation of
qpair polling to increase performance.
The generic implementation is included. The transport specific calls
have yet to be implemented.
Change-Id: If07b4170b2be61e4690847c993ec3bde9560b0f0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also modify some api documentation to indicate how the
new API should be used.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icdbfb09aceda28635fdd191c520b36c692c2c100
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
connect_io_qpair essentially allows us to split the qpair allocation process
in half which will make it possible for us to do more sophisticated things
with RDMA qpairs in poll groups. as a companion to this new API, a connect_only
option has been added to the io_qpair_opts struct which instructs alloc_io_qpair
to only allocate the qpair and not connect it.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9ba9502dd39436006a9ac71436dd1871d648ed1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Contidion previous to this should already verify that
md page is not an extent page.
All extent pages are not part of the chain (sequence_num == 0),
and their location (ctx->cur_page) cannot be the root of
md chain (page->id).
Yet during development it could appen, so adding assert
to verify further that the md page is not extent page.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6d5dc2ae965f8f9a388cd1c8e186145f8ca91db4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Before this patch reading out the extent pages during
blobstore replay was serialized. Only issuing reads for next
extent page when previous operation finished.
This was done by continously calling _spdk_bs_load_replay_extent_page_cpl()
and decreasing ctx->num_extent_pages.
This patch changes spdk_bs_sequence_* to spdk_bs_batch_*.
All the reads are submitted at once, and only when all of them
finish we proceed to next valid md chain.
Goal of this change is improving efficiency and readability.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I807cdb98166e04706fedb494363f5776e3151827
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable currently holds single extent page.
Further patch will utilize it to use multiple.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If86ffd57cecf5d3bfd0812a767c784d7bf503fb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This field does not hold actual pages, but just md page numbers
which hold the extent pages.
Rename as prepartation to adding new one that will hold actual
extent pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1fb85a58c92a93b968e1fad22e421252399e9281
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add function nvme_rdma_get_key to get either lkey
or rkey, use it in request building functions
Change-Id: Ic9e3429e07a10b2dddc133b553e437359532401d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1462
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cache payload type and in-capsule data transfer support
Change-Id: Id40a6e86d1f29235ca3e0189d7fbcf19baa30ffe
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
%*s prints at least * characters and may add padding to the string.
%.*s prints at most * characters.
In a few places we used the first instead of the second and
printed some garbage to screen (in the best case...).
Change-Id: I97a862be61a5e43aa61e8230044dbd64a9db33bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We have been intermittently hitting the assert where
we check sock->cb_fn != NULL in spdk_sock_group_impl_poll_count.
The only way we could be hitting this specific error is if we
wereremoving a socket from a sock group within after receiving
an event for it.
Specifically, we are seeing this error on the NVMe-oF TCP target
which relies on posix sockets using epoll.
The man page for epoll states the following:
If you use an event cache or store all the file descriptors
returned from epoll_wait(2), then make sure to provide
a way to mark its closure dynamically (i.e., caused by
a previous event's processing). Suppose you receive 100 events
from epoll_wait(2), and in event #47 a condition causes event
#13 to be closed. If you remove the structure and close(2)
the file descriptor for event #13, then your event cache might
still say there are events waiting for that file descriptor
causing confusion.
One solution for this is to call, during the processing
of event 47, epoll_ctl(EPOLL_CTL_DEL) to delete file
descriptor 13 and close(2), then mark its associated data
structure as removed and link it to a cleanup list. If
you find another event for file descriptor 13 in your batch
processing, you will discover the file descriptor had
been previously removed and there will be no confusion.
Since we do store all of the file descriptors returned from
epoll_wait, we need to implement the tracking mentioned above.
fixes issue #1294
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib592ce19e3f0b691e3a825d02ebb42d7338e3ceb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Here destruct contrllers are in one function, and we can
remove the duplicated codes using goto.
It can save several lines of codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ibf3cb9fe2ea4bfc65d42603a7b13aaf575854580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When removing large number of devices (>8) in parallel,
the 20ms timeout is not long enough.
As part of spdk_detach_cb, DPDK calls into the VFIO driver
which may get delayed due to multiple hot removes being
processed by pciehp driver (pciehp IRQ thread function
is handling the actual removal of a device in paralle but
all of the IRQ thread function compete for a global mutex
increasing processing time and race conditions).
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I470fbbee92dac9677082c873781efe41e2941cd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1588
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recent improvements to blobstore code, allow proper
reporting whenever error occured.
Callback for blob_create, should not refer to the blob
pointer when the operation failed.
Defer checking spdk_blob_get_id(blob), til after checking
error code.
This has been encountered in "vhost_boot" test:
15:20:54 # /var/jenkins/workspace/vhost-autotest/spdk/scripts/rpc.py -s /home/sys_sgci/vhost_test/vhost/0/rpc.sock bdev_lvol_create -u d605539d-2186-486f-bc3e-745e33d37072 lvb0 20000
vhost: blobstore.c:5101: spdk_blob_get_id: Assertion `blob != NULL' failed.
https://ci.spdk.io/results/autotest-per-patch/builds/8135/archive/vhost-autotest/build.log
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id926576e10a72e0d50fb65105be07c8ae8e40096
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds more ways to back off when parts of
blob persist fails.
Otherwise the process would proceed as if nothing happened.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7cff73e1dc3066d0c822d1e3dac4bd35e27cd54a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1263
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After opening the blob for deletion, in _spdk_bs_delete_open_cpl(),
the blob is removed from list of blobs in blobstore.
This is to prevent future _spdk_blob_lookup()s from referencing
blob while it is deleted.
In usual blob deletion path, next step is proceeding with deletion
of the blob by reducing its size to 0 and syncing the blob.
Changes from this point forward are persisted.
Meanwhile in special case of deleting snapshot which has single clone
on it, before above occurs additional steps are performed.
Each of the blobs are opened and their attributes changed.
Failures on those steps are fully recoverable on any errors,
and in such case blob should be added back to the bs list of blobs.
Original code had condition on how many references there were
to blob being deleted, which is incorrect.
Any error on that path should clean up after itself (revert attributes
and close blobs) and re-add the blob.
This change is tested with blob_delete_snapshot_power_failure() UT,
by adding error path in persist - which triggers error in aforementioned
blob delete code path.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I926e7cbf3cb86170c69f31231399535859f290dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When creating snapshot, 'original' blob will end up being a thin provisioned clone.
Before that first thin_provisioned 'newblob' is created during this process.
If the first md sync for 'newblob' fails, it means that only valid references to
clusters are still only present in 'original' blob. The 'newblob' can be safely
cleaned up.
Unfortunetly 'newblob' inherited some of 'original' blob properties before sync.
Cluster maps were already swaped in current cleanup code. But during blob close
of 'newblob' - persist blob code expects clusters to be 0 only for thin_provisioned
blobs. If original blob was thick, then it triggers an assert within persist code.
This patch makes sure to set thin_provision to 'newblob', to align with its creation.
Added asserts to verify that clusters maps are 0's, which should be the case
as I/O to origblob is frozen.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5420617792aefe8a3ef4e5989b2056504cdd1850
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously the SPDK NVMe driver always set PSDT to 01b for hardware SGLs
which is aligned to the Linux NVMe driver, for this case the metadata length
is not required when filling the NVMe command fields. There is no alignment
nor granularity requirement for Data Blocks for PSDT 01b case. And if the
drive reported that it needs dword alignment with SGL, for this case, when
using spearate metadata, it needs a length parameter to fill the SGL descriptor.
Change-Id: I56ffaada775fe66de7637dae15b509ee9556e80a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the drives report that SGL dword alignment is required in
Identify Controller data structure, when using separate metadata,
PSDT should only be set with 10b. The specification says: If PSDT
01b was used, Metadata Pointer (MPTR) contains an address of a
single contiguous physical buffer that is byte aligned.
For supporting this case, SPDK driver needs a metadata SGL entry,
so we can reserve one entry in the tracker data structure.
Change-Id: I2d86a58b0395c3000626f922e56d7f2212c8a752
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add FC listen address to target listeners table before attaching the
same to the subsystem listener list. Without this fix, subsystem allow
any listener provision which is very important to FC-NVMe is broken.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I06436c0a73e65cb5f7bb3280658fcf200b975989
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently SPDK rejects Connect command when subsystem is not active.
This change allows to queue Connect command and execute it when
the subsystem goes back to active state. To queue the command we
should know subsystem_poll_group, in current implementation
this poll_group is known only when controller is already created.
To get the poll_group for Connect command we can retrive subsystem
subnqn, find subsystem and get poll_group by subsystem->id.
Increment subsystem_poll_group->io_outstanding even for Connect
cmd in order to prevent subsystem change state during the
connection process. Update spdk_nvmf_request_complete -
decrement io_outstanding for Connect cmd.
Fixes#1256
Change-Id: I724abb911696d7234a9c9d27458eba24739b26fd
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1273
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We callocated the listener, but if we to execute the listening
behaviors which got failed, and all the other resources have been released,
only left listener.
Fixes issue #1326.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I020b509caed79e9880d07b01888ed389630ff67f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make opal_init_key() only do the key initialization.
Change-Id: Ie2eb76a1008ba66a0706b3f035c52dbd548fdfc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use unpacked user and key parameters instead of packed
structure as the input parameter.
Change-Id: I1e7db5c9dd3f4055165d790105ec5d05961f8f92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use the unpacked parameters instead of the packed
structure, this is more clear according to the function
definition.
Change-Id: I2de6cb456c2d40aea4408bbb1c7c6453b69cf290
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The input locking range and locking state parameters are enough,
so we don't need to pack them into a structure.
Change-Id: I6dc7074d2611c3974b1f0a80202cf5b7d73862aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unpack the opal_common_session structure in function opal_start_auth_session(),
this can help us to use only one active session structure in following patches.
Change-Id: Ic9c5f993303a923b46c79a479c2de9b143277d47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The locking range variable has fixed 8 bytes of length, so we don't
need to check the length again in the build function.
Change-Id: Id8c667367c93de1aee829f2e190af516456ad8c9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No need to check the length parameter, inline it is more clear.
Change-Id: I2fa66ed731b20898311b6ade14b837191d366af7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the controller can only support 1 session, but we can refactor
the OPAL internal APIs running based on session, then we can allocate
a session from public APIs, currently we just use the session that
embedded in the global device structure.
No actual logic change from this patch.
Change-Id: Ifbc801970f3df6f0753a5796715667f2eaf664aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the drive reports that only one session and one comID are
supported, and it can only support synchronous method, but it should
allow users to send multiple security send/receive commands at the
same time. Looking back the implementation of existing library, it
works but not so good, here as the first step, we will not use the
global data buffer for security receive command when doing level 0
discovery.
Change-Id: Ib735129b7cb6b1fd98be5fc208fbe149f3971773
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also remove the unused ctx and a function declaration.
Change-Id: I2f76d5c4795a0bfa3c075a5be83a7be434df6a64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The quirk can only be applied when not exceeding mqes. Given codition
is not enough as DEFAULT_IO_QUEUE_SIZE can be equal mqes + 1. In such
case driver is unable to create io queues.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I72de37ee413788ffd3483e814eded21ea05997c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add process_blk_task to replace the common codes
of the process_vq and submit_inflight_desc for making
code simple.
Change-Id: I5ff146e904874714dd59249f5191a3606e523c3e
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
PSDT 00b also need to check the metadta alignment.
Change-Id: I117f524c61bc4c712b46c91e4d51549825d06f6c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We only set the flag to false when the controller reports SGL supported
and can use byte contiguous buffer. Also check the data block's alignment
for hardware SGL.
Change-Id: Id936c49823963000d0543fc95fbb6edba3118feb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Dword alignment and granularity are required for the data blocks when
the controller reports this capability.
Change-Id: I6b6300515a528acb34a032050ceedf673a4b326c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1315
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix the vdev->name to vsession->name for making it
same with the process_vq.
Change-Id: Ie0e9733bdbfbddbbf7e665b8c9431bfdbcb8a569
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Not context passed to vhost_dev_for_each_session() but struct
spdk_vhost_session had been passed to the callback to
vhost_dev_for_each_session() by mistake.
This patch fixes the bug. Besides, rename ctx by ev_ctx to avoid
potential future degradation.
Fixes issue #1306.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ceed4e1bb7c0c27fb75516527e3bad91a054b02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Collect elapsed time of each SPDK thread and add it to output of
framework_get_reactors RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2f0487de81720327428cda5738284a4ce2c557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch updates reactor to count thread run time correctly
on multiple SPDK threads per CPU core configuration by using
the refined spdk_thread_poll().
Add tsc_last to struct spdk_reactor to use the end time of the
last thread as the start time of the next thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21042867885d289ff0c23bf2a9ba6a8076a59673
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Update spdk_thread_poll() to count SPDK thread stats correctly on multiple
SPDK threads per reactor configuration.
spdk_thread_poll() gets start time and reads TSC at end as end time,
and then gets delta between them as run time. Run time is added to idle
time or busy time according to the result of polling.
Reactor overhead is included into the next thread which calls
spdk_thread_poll() now.
spdk_thread_poll() saves the end time to the current thread to use it
as the start time of the next thread.
Unit test framework for this patch and the next patch need to access
thread->tsc_last. In the next patch, reactor will use the end time of
the current thread to the start time of the next thread in reactor_run()
to realize the idea.
Hence add an new API spdk_thread_get_last_tsc(). The corresponding
variable is named as tsc_last and it is good and is aligned with
DPDK (DPDK has used tsc_start and tsc_end as variable name). But
last_tsc will be better as API name because the last TSC value is
easier to understand.
Then add necessary unit test and update the unit test framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e465e9283c032acb427576d0c90f9e1414f2271
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Actually we can just use one API to finish the requirement.
Change-Id: Ia0d3d589755e8c92f636d3d090ec642299511401
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The APIs even don't have a chance to be called if the drive can't
support OPAL feature, so just remove the NULL check, and we will
store level 0 discovery descriptors after initialization, so
spdk_opal_cmd_scan() isn't necessary here, remove it as well.
Change-Id: I24f12f2c352996d9ebe76dc015cd0b7502798359
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The previous erase locking range API didn't take the real
erase action, it's kind of secure erase, so rename it with
another name and add the real erase support.
This method is used to cryptographically erase user data within
a specific LBA Range and to reset the access control Locking
of that LBA Range.
The TPer SHALL reset the ReadLockEnabled, WriteLockEnabled,
ReadLocked, and WriteLocked column values to False for the
Locking object on which the method is invoked.
Change-Id: I0c83df589382b0a2f189642d8119e389aa4bc559
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are maximum 8 locking ranges per TPer, so we don't need to use
calloc() for each range.
Change-Id: Ie9d96ba28736dd7a91cb615ece99ebcefa695fc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Both spdk_opal_key and opal_common_session are used in the same context,
so we don't need to save spdk_opal_key pointer in opal_common_session,
juse use the stack value.
Change-Id: I24b64711b45f09a60f9aca1175319e32de4c7e10
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For active key we don't need to store in the calloc() data
structure, because we'd better not to store any password
related structure, and it's only used in specific context,
so just use stack variable instead.
Change-Id: I4711e279ffe9a97d471f0db0b625b95a36b55d38
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will help with making the _spdk_blob_persist_write_extent_pages()
batch all writes of extent pages.
No functional change occurs with this patch, this is just refactor
for future change.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8c93b1d6473db660f7ad5e04c8ec9f3331b2055c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/986
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
super->clean value signifies if blobstore was unloaded
cleanly.
If it was not, then during bs_load the _spdk_bs_recover()
procedure if called.
Meanwhile bs->clean is always set to 1 after load, causing very first
blob_persist to also re-write super block with the super->clean
set to 0. To signify that md has changed and possibly trigger
the recovery if clean bs unload does not occur.
When the re-write of super block succeeds the bs->clean is set to 0,
because further re-writes of super block are not needed on next
blob persist.
This patch resolves issue when:
1) reading super block fails - execution should backoff, to prevent
writing an empty buffer as super block !
2) writing super->clean = 0 to the super block fails - execution
again should fail, and bs->clean should not be set to 0. It will
cause next persist to attempt re-write again.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia07cc5c6c107310059b50886edb7283c176b9169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In general it is not possible to delete snapshot when
there are clones on top of it.
There is special case when there is just a single clone
on top that snapshot.
In such case the clone is 'merged' with snapshot.
Unallocated clusters in clone, are filled with the ones
in snapshot (if allocated there).
Similar behavior should have occurred for extent pages.
This patch adds the implementation for moving EP from
snapshot to clone along with UT.
The UT exposes the issue by allowing delete_blob
to proceed beyond just unrecoverable snapshot blob.
Fixes#1291
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib2824c5737021f8e8d9b533a4cd245c12e6fe9fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1163
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If nvme_rdma_qpair_submit_sends() returns -ENOMEM,
nvme_rdma_qpair_process_completions() returns immediately.
In this case, nvme_rdma_qpair_process_completions() does not
poll CQ.
However, nvme_rdma_qpair_process_completions() can poll CQ even
when there is no free slot in SQ.
Hence move nvme_rdma_qpair_submit_sends() and
nvme_rdma_qpair_submit_recvs() after the loop to poll CQ.
nvme_rdma_qpair_submit_sends() and nvme_rdma_qpair_submit_recvs()
output error log and so checking return code of them is not
necessary and is removed in this patch.
This fixes part of the github issue #1271.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icf22879c69c3f84e6b1d91dc061b6f44237eedd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is another preparation to extende spdk_thread_poll() to update
thread stats correctly on multiple SPDK threads per CPU core
configuration as an new function spdk_thread_poll_ext().
As another preparation, factor out main loops of spdk_thread_poll()
to _spdk_thread_poll(). _spdk_thread_poll() will be called in
spdk_thread_poll_ext() in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie006359c00afc2e9b90e15f918f76cf1af0b7ce1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will extend spdk_thread_poll() to update
thread stats correctly on multiple SPDK threads per CPU core
configuration as an new function spdk_thread_poll_ext().
Thread stats will be updated separately by spdk_thread_poll() and
spdk_thread_poll_ext(), but updating thread stats itself is
the common operation.
Hence as a preparation, factor out updating thread stats operation
from spdk_thread_poll() to _spdk_thread_update_stats().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I93c40eb0363ca34f2150299b09c49f1401583832
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1242
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The shutdown flag is only used when resubmitting the AER, and it will not
be updated when hot remove happened, so rename it to is_destructed.
Change-Id: Iafc27bd6cb23a851ed6c96470a2a45546a399c88
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1254
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch does drop in replacement of SN32_LT and SN32_GT by
spdk_sn32_lt and spdk_sn32_gt, respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5df1e461d2b25a2f20222e823fb1ec68ced049ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1347
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_jsonrpc_begin_result() was changed to always return non-NULL
a while ago. Most of the checks were removed from SPDK, but this
one must have been omitted because to its unusual structure.
Change-Id: If305d7a27d8e6bd4dae1aa8221efabba50db1982
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no reason not to publish those. Especially if
they're needed in other public headers.
Change-Id: I7dfc6922fcc0dfc46822ad8a16a375f997b98e84
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe specification in ch.7.6 "Controller Initialization" suggests to
use only Set Features "Number of queues" command and says nothing
about Get Features. All required information is available after Set
Num Queues step.
Fixes#1270
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ide38ba9c7f063f1d6b13bfce4232c588cc906784
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Compiling raid5 has a direct dependency on rte_hash,
which was only built if vhost was built.
The following didn't work:
./configure --with-raid5 --without-vhost
Change-Id: Id36a7d4a21c2e0db00b0641581542e244c4cbbb4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to link with rte_vhost only if it was present as a file,
which doesn't make much sense - we should try to link with it
when we think it's needed.
Change-Id: I9609972d419fdf6e8d3b4644eff3f5dba83abe42
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
the nvme, nvmf, and thread libraries have all had public APIs
removed or changed since the API was changed to 2.0 and
backported to 20.01.1 we should rev these so versions to make
that distinction obvious.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Id48454b8d0451794abad4db452b5c4e337b23c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous patch ce6b8a1313
added a wrong assumption that every WC of RDMA_WR_TYPE_DATA
type must point to rdma_req with IBV_WC_RDMA_READ opcode since
RDMA_WRITE operations are non-signaled. However it is wrong
since in the case of error all WRs will have WCs. Revert part
of the problematic patch.
Change-Id: I8d270c5313ebfe1ec44a338820a62f085996eb8f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1334
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI target got segmentation fault if connection is being exited
between spdk_iscsi_conn_write_pdu() and its callback
iscsi_conn_login_pdu_success_complete() are executed.
This was caused by recent asynchronous socket write feature.
Fixes issue #1278.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idffd90cd6ee8e6cb4298fe3f1363d8d5c5a3c49d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Not doing thsi was causing me to hit an assert in this funciton that was
caused by us erroneously calling into it from the error path of
_nvme_qpair_submit_request.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I46a4d9ec543281d756cc4447d3e880a98f341092
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This gives us a more standard path in the create_io_qpair path. Eventually
this will allow us to bring the connection commands out to the generic layer
in alloc_io_qpair. Then we can split the calls to create and connect at the
generic level making it possible to add rdma qpairs to a poll group in a meaningful
way.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib1b125f834c3c39a2b5050ff4a9bc4a053b95c99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows it to fit on three cachelines instead of four.
Change-Id: I2510b50ffcefb77fa570e738b2c6588749f30a00
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1143
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The current implementation doesn't log WC status. Remove independent
logs by WR type, use common error log. Besides that add a minor cleanup
in checking of WC opcode for RDMA_WR_TYPE_DATA type - it is always
RDMA_READ
Change-Id: Ifdfc295e804ab3246ec54327afc8a5a37aca1d55
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit ea5ad0b286.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I333bdf325848e726ab82a9e6916e1bbdcd34009c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit d50736776c.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I7cf477333f2a3fa4a0089394d5fa28142b262a7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 5e7b8d18f3.
This code is moving from the nvmf target down into the posix
sock layer in this series.
Change-Id: Iea9a7cef5bedd6a34edf7b4c87825897279829c3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used by upcoming spdk_top application.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9ffcc3f2e36b8044bbc394938fc7a1dca1dc6892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If we specify zone bdev whose block size is not 4096 for bdev_ftl_create
RPC, SPDK application will hung up because spdk_io_device_unregister()
is called for unregistered IO device. Fix this error.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ec36dc062edb7867aab892073db3af258808114
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
It was probably miss-interpretation of description from discovery log
page which refers to min admin max sq size.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I575bf7fd6beb904b3a38a07616b76a34f8365643
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Align rdma and tcp to respect opts. Reduce default number of entries
for admin queue so it becomes memory optimization.
Linux driver by default creates admin queue with 32 depth, there is no
good reason to enlarge that queue by default within SPDK NVMe driver.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I97ceea8f350c52313021a63190fb0980f604c48e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add thread_count to struct spdk_reactor to count number of threads
per reactor. This number will be used in the next patch to know
if all threads are idle or not for each reactor to support CPU
power saving.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f7cc5a6b78d85e9f8d0b539c60058c13e282759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It was too difficult for us to add unit test for _spdk_reactor_run()
because the main polling loop in _spdk_reactor_run() was infinite
if g_reactor_state is SPDK_REACTOR_STATE_RUNNING.
Factor out the main polling loop and rusage update in _spdk_reactor_run()
into a helper function reactor_run().
This improves the code readability as well.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia26db14f44026fefd696443227c16d2be4166832
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is a preparation to the next patch which factors out the main
polling loop of _spdk_reactor_run() into a helper function reactor_run().
One of the subsequent patches will support CPU power saving by
adding sleep into reactor_run(). We should not insert sleep between
the main polling loop and getrusage() because now is got before
entering the main polling loop.
To put getrusage() into reactor_run(), we need to maintain last_rusage
in struct spdk_reactor and maintain g_rusage_period as a global
variable. This patch does these changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61bf50de6a170ac73c8fe17e85077b90171dd9c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It's more straight forward to call opal_start_generic_session() directly in
different scenarios. It will help us to use stack variable "prev_data" to
store temporary key during the session, which is more safe.
Change-Id: I70b9190ed3606cd5e26c23319aca82d4a38596cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It's not an error to send a security receive command before each
real OPAL related commands, but we don't need to do it.
Change-Id: I7628988df6ac097264db2137440f63db9e6e3660
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the spec defines the Method Status Error Code, but here the return
value is just from function uses the normal errno, such as ERANGE, so just
remove them.
Change-Id: I43be95f62a4e465090462743b91246b1d63e2acd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the TCG Storage Core Architecture V2.0, the level 0 discovery
response should use level 0 discovery header and feature descriptors to
retrieve the response data buffer. ComPacket header should be used in upper
layer.
Change-Id: I61e3e206801994b276608f9afbda800eccb2cffa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1124
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No actual logic change except re-define some data structures.
Change-Id: Id0a483071591beee675cbc3ef368ac1fb723cfe0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also uses ComPacket header to check the received data, no actual
function changes.
Change-Id: I905fc6b8bb4656d48d43ff4ff8d1f705b9b595b9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the error print if there is still remaining_size in
order to provide more meaningful debug info.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7b15c9c9a630ea7ecb2d3191b73c9c99f7febf31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1189
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since part of FTL IO channel initialization is done
asynchronously we need to check if IO channel is fully
initialized before write.
Change-Id: I0dff6a057024ffeb16b57ca5d7484f148b6fee82
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be re-used in the muser transport of nvmf.
Change-Id: If00e6ea79ffdc0c3bda0402f39c5f9f4f411788b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/425
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
subsystems
This is optional and most transports will not implement it.
Change-Id: I51e0f1289b0e61a8bdb9a719e0a2aae51ecb451c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By sending message to the thread with which controller is associated,
we can simplify vhost_dev_foreach_session(). We can iterate
sessions list and we do not have to differentiate if session is
started or not.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I59767a5788c190545a81976e75871609da703f45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1147
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently each controller is associated with one of the poll groups.
For each controller, all sessions are associated with the poll
groups with which the corresponding controller is associated.
Vhost poll group does not have any polling loop but its usage was
very complex.
Association of controller with poll group is done based on the
specified cpumask, and poll group is created per CPU core.
This is as same as association of thread with CPU core.
So in this patch, replace poll group per session by thread per
controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa1e136caae11959f7b097b06a22910bc2169b30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The next patch will create a SPDK thread in vhost_dev_register()
and exit the SPDK thread in vhost_dev_unregister().
As a preparation, simplify error paths in vhost_dev_register()
by changing some gotos to return, moving free after the out label,
and moving insertion after succeeding vhost_register_unix_socket().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id1a2a50b4ba5732f91598a326a08de5c652fd136
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This way if nothing prints it's just using software. If CDMA
is being used it will print that. Will do the same for DSA
once added.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I44c49cf3a495d5e8440e80fa42fbb6f1338c5aac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1183
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a preparation to support thread_get_io_channels RPC
in the next patch. The next patch will refer only name of struct
io_device, and so adding a helper function is better than making
struct io_device public.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc9dd78f71aa1e32847dc4c67eb79dae9cfbf9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/886
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_get_pollers to retrieve pollers of all
the threads. By adding a helper function spdk_poller_state_str(),
output poller state as string to improve readability. Most of the
code of thread_get_stats and thread_get_pollers are common and so
unify these two RPCs as possible as we can.
Sample output of thread_get_stats RPC in doc/jsonrpc.md was wrong
because thread_get_stats doesn't output ticks. Fix this together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I003ffe569d3c0651ae65c5858eff8287f7e9031d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This gets rid of some duplicate lines of code.
Change-Id: I24d4864921f6030672f3640b33f88f37a9e8175a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Further part of the series will hold array of md pages
in the ctx. Callers of _spdk_bs_load_replay_md_parse_page()
will make select which page to parse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3fb70660672ba74bdb338eb1233409103903b215
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is refactoring change for future patches.
struct spdk_bs_load_ctx will contain array of pages
instead of single one. Having to change just single
line for selection of page will make it easier to
read next patches in series.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If3dc1e7da7e61c7b4866307d859e55131a32d38b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/982
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New spdk_ftl_conf parameter l2p_path, l2p_path defines
location of existing pmem file or device to use as l2p table.
ftl_dev_l2p_alloc now has two flows:
1. If l2p_path is set perform pmem_map_file (PMDK) of l2p_size on it
2. Else malloc l2p table as usual
l2p_get/set will use atomic_load/store on both of those storage
locations as PMDK pmem_memcpy family of functions is not thread safe.
Signed-off-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Change-Id: I91806feb7aa0ef8057792bc120b09a39c63c8640
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When using vfio with enable_unsafe_noiommu_mode=Y, force iova-mode
as "pa" here for DPDK guesses it's "va", which cause the following
error: "EAL: Expecting 'PA' IOVA mode but current mode is 'VA',
not initializing".
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I7c343498c5d6976a7c75d75438d6f9c35f1b6160
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1071
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In some cases, conn->sock will be lost, while conn pointer will still be.
A runtime error will apperars: null pointer of type 'struct spdk_sock'.
This only happens when ./configure with asan.
So I add a sssert to display this error explicitly when it occurs.
Change-Id: I7d012ac1a29a7fb0bce4815e0622582f23222a25
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also rename __initialize_cache()/__free_cache() to the new name
to reflect the logic.
Change-Id: I69bec4a10b2f21a7c40475fc2a99919bc526c556
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we will free the cache buffers in the file R/W
data path, however we can start a thread to do the cache
buffer reclaim regulary, so that we don't need to free
the cache buffer in the Rocksdb thread context. By
doing this, we can also remove the global cache buffer
lock in following patches.
Change-Id: Icb0fbc49baecd1e9d86a5fcfe400758dfc3c53a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace g_tmp_cpuset by tmp_cpuset local in vhost_get_poll_group()
without any side effect.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb01d2c77d6d82d7cc81df722e7848b357d4e9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We use `spdk_map_bar_rte()` to read mapped addresses
from PCI BARs.
This function is currently checking for NULL in each pair.
But in PCI memory, some registers can be left unused,
in which case they are set to 0.
As a result, we may read some NULL pointers from BARs,
which is OK.
To check if given address is indeed invalid, we should first
check if it is used.
So it is best to delegate such checks to the
user of this function.
In fact, users already do the NULL check where it is needed
(ex: virtio_pci.c:390, nvme_pcie.c:589)
so this patch just removes them from `spdk_map_bar_rte()`.
This solves github issue #1206
Change-Id: I88021ceca1b9e9d503b224f790819999cd16da01
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix Segmentation fault on the target side.
Issue:
rdma.c:2752:spdk_nvmf_rdma_listen: *NOTICE*: *** NVMe/RDMA Target Listening on 192.168.35.11 port 4420 ***
rdma.c: 789:nvmf_rdma_resources_create: *ERROR*: Unable to allocate sufficient memory for RDMA queue.
rdma.c:3385:spdk_nvmf_rdma_poll_group_create: *ERROR*: Unable to allocate resources for shared receive queue.
Segmentation fault (core dumped)
GDB:
Program terminated with signal 11, Segmentation fault.
736 if (resources->cmds_mr) {
(gdb) bt
736 if (resources->cmds_mr) {
(gdb) bt
0 nvmf_rdma_resources_destroy (resources=0x0) at rdma.c:736
1 0x0000000000497516 in spdk_nvmf_rdma_poll_group_destroy (group=group@entry=0x2fe1300) at rdma.c:3489
2 0x00000000004978bb in spdk_nvmf_rdma_poll_group_create (transport=0x2fe11d0) at rdma.c:3371
3 0x000000000048df70 in spdk_nvmf_transport_poll_group_create (transport=0x2fe11d0) at transport.c:267
4 0x000000000048a450 in spdk_nvmf_poll_group_add_transport (group=0x2f49af0, transport=<optimized out>) at nvmf.c:941
5 0x000000000048a6cb in spdk_nvmf_tgt_create_poll_group (io_device=0x2fce600, ctx_buf=0x2f49af0) at nvmf.c:122
6 0x00000000004a0492 in spdk_get_io_channel (io_device=0x2fce600) at thread.c:1324
7 0x000000000048a0e9 in spdk_nvmf_poll_group_create (tgt=<optimized out>) at nvmf.c:723
8 0x000000000047f230 in nvmf_tgt_create_poll_group (ctx=<optimized out>) at nvmf_tgt.c:356
9 0x000000000049f92b in spdk_on_thread (ctx=0x2f81b20) at thread.c:1065
10 0x000000000049f17d in _spdk_msg_queue_run_batch (max_msgs=<optimized out>, thread=0x1e67e90) at thread.c:554
11 spdk_thread_poll (thread=thread@entry=0x1e67e90, max_msgs=max_msgs@entry=0, now=now@entry=947267017376702) at thread.c:623
12 0x000000000049af86 in _spdk_reactor_run (arg=0x1e678c0) at reactor.c:342
13 0x000000000049b3a9 in spdk_reactors_start () at reactor.c:448
14 0x0000000000499a00 in spdk_app_start (opts=opts@entry=0x7ffc2a5e0ce0, start_fn=start_fn@entry=0x40aa80 <nvmf_tgt_started>,
arg1=arg1@entry=0x0) at app.c:690
15 0x0000000000408237 in main (argc=5, argv=0x7ffc2a5e0e98) at nvmf_main.c:75
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Id9bf081964d0cf3575757e80fc7582b80776d554
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1073
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To avoid the strange formatting, typedef has been used. But this
comment is hard to get the meaning. So stop breaking after return
type for this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia03d6ec50610c395007fe172018b890733dce599
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To avoid the strange formatting, typedef has been used. But this
comment is hard to get the meaning. So stop breaking after return
type for this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I317604de67aab9f201d691e0f886bd673f451f3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1051
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To avoid the starnge formatting, typedef has been used. But this comment
is hard to get the meaning. So stop breaking after return type for this case.
The strange formating is
struct spdk_scsi_dev *
spdk_scsi_dev_construct(const char *name, const char *bdev_name_list[],
int *lun_id_list, int num_luns, uint8_t protocol_id,
void (*hotremove_cb)(const struct spdk_scsi_lun *, void *),
void *hotremove_ctx)
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20c30b225b3b96fa9207b4a89e3210c8a97fb1d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add an new API spdk_poller_register_named() to set arbitrary name
to the created poller. If NULL, the name is set to the pointer of
the poller function.
To set the name to the string of the poller function name conveniently,
add an new macro SPDK_POLLER_REGISTER() together in this patch.
All debug or error logs are changed to output poller name from pointer.
The added name will be used in the new RPC thread_get_pollers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3be558dd795252f797e3e81fa2db2e8b128cf004
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
thread_get_pollers RPC which will be added in the upcoming patches
will need to access internal of all pollers.
Following the last patch, expose struct spdk_poller internally among
SPDK libraries.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6844fc70165b4f127c49680ce592ac7b8c326cac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
thread_get_pollers RPC which will be added in the upcoming patches
will need to access all pollers each thread has.
To avoid adding JSON related code into lib/thread/thread.c, expose
struct spdk_thread internally among SPDK libraries and RPC code will
access it.
The next patch will expose struct spdk_poller internally among
SPDK library for the same purpose.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8da039db3021966ca1e28f6f086bb4c2a8eeb84a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use the payload to construct iovs so that split desc
or packed desc can both work.
Change-Id: Ib2c60b6eb53d0d615594e97b3d3ae1a365908b6c
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replaced single global write buffer with the per-io_channel write
buffers. This means that the "rwb" module and all of its references
were removed and replaced with the recently added interfaces.
Change-Id: Idc899d3a4d63a8a2bede1ac26549ed06e9a2e784
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Added queue responsible for keeping track of full, ready to be written
batches. A batch might be put on this queue in case it'd already been
filled, but could not be written out due to lack of resources or it was
written out, but failed and needs to be resent.
Change-Id: Iba49cd359425300d21b8100f13f17189e99d4c7c
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Metadata buffer was added to ftl_batch structure. It'll make it
possible to send writes with a separate metadata buffer.
Change-Id: I475c0982809cb0cc9aa6bcbc2a4935a6f15f19af
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/907
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Two functions were added:
- ftl_get_addr_from_entry() returning an address pointing at a given
entry
- and it's inverse, ftl_get_entry_from_addr(), returning a write buffer
entry for a given address
Change-Id: Iea1e2e59f240f50183fdb549280a0f0b722efbef
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds the ftl_batch strucutre, which describes a single batch
of data to be written to the disk. It's comprised of multiple write
buffer entries (the actual number depends on the write unit size of the
underyling device).
Additionally, a function responsible for filling out a batch was added.
It iterates over available IO channels and dequeues submitted write
buffer entries until a batch is completed. The IO channel queue is
shifted, so that each time the function is called a subsequent IO
channel is used first, which guarantees that all channels are treated
fairly.
Change-Id: Ie61d8c6cb51d5c5175540c975447bc27590c5cb4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added functions responsible for acquiring/releasing write buffer entries
from the per-io_channel caches. They're also in charge of limiting user
writes by reducing the number of available entries to the user.
Change-Id: I23adfe36065139036f9b72a016e34fbf6eb29230
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch introduces the per-io_channel write buffer entry, the
structures necessary for its management, and performs their
initialization. They will be utilized by the upcomming patches.
Change-Id: I772caa445d1887166b9bcd7679d32d2ed2461ef3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/903
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The IO channel pointers are now stored inside an array of the device
they belong to. Once write buffer entries are tied to IO channels,
it'll provide a method for dereferencing an entry from its address.
Change-Id: Iaf401525eb0f5af8dc6047a1dc8bae11b56761d7
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the first patch of a series that replaces single global write
buffer with per-io_channel buffers. This change is intended to improve
performance for multithreaded workloads.
This patch changes the way the ftl_io_channels are allocated by only
keeping an ftl_io_channel pointer inside spdk_io_channel's context. It
allows for delaying IO channel destruction, which in turn allows the FTL
to iterate over all exisiting IO channels without locking.
Change-Id: I5e0cab8043a2b5f747e971dd3d65ed2546c8cf26
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/900
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a flag resched to check if reschedule operation is requested
to struct spdk_lw_thread. Add _reactor_resquest_thread_reschedule()
to set the resched flag, and add it to the case SPDK_THREAD_OP_RESCHED
in spdk_reactor_thread_op(), and return true in the case
SPDK_THREAD_OP_RESCHED in spdk_reactor_thread_op_supported().
Then _spdk_reactor_run() checks if the resched flag is true for each
thread. If true, set the resched flag to false, and remove the
thread and call _reactor_schedule_thread(). Add continue to avoid
use-after-free issue for both reschedule and terminate cases.
This idea follows voluntary thread termination and will remove our
worries for all complicated rare cases.
Add unit test case to verify this update.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I656872d32dbb469ae70f771cd0419a77236bfe18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove checks for open bands inside because
we should only support closed bands relocation.
Change-Id: Ice5f13d579a046a9cb46684488801a2fa0c15a9d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since ftl supports only one core thread ftl_thread
structure is not needed anymore.
Change-Id: I66eda9249d74b3eff0c4473dcd0aba4a6135e296
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Since relocation can be done only on core thread there is
no need for spdk_ring. Move queue size is limited by
reloc->max_qdepth so we are trying to iterate over all
move elements in move queue when processing band relocation.
Change-Id: Ic4cfaeeab4b5f3dd3e1dbd967908a3e6c9b3ed46
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add transport_ack_timeout parameter to nvme controller opts.
This parameter allows to configure RDMA ACK timeout according
to the formula 4.096 * 2^(transport_ack_timeout) usec.
The parameter should be in range 0..31 where 0 means use
driver-specific default value.
Change-Id: I0c8a5a636aa9d816bda5c1ba58f56a00a585b060
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an new API spdk_thread_set_cpumask() and enum SPDK_THREAD_OP_RESCHED.
spdk_thread_set_cpumask() can be called only from the current thread
and requires SPDK thread operation supports reschedule operation.
spdk_thread_set_cpumask() updates the cpumask of the current thread to
the specified value, and then invokes framework's reschedule operation
to the thread.
If spdk_thread_set_cpumask() calls multiple times in a single
spdk_thread_poll() context, the last value will be used in the
reschedule operation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7808626b10269543c1e2cd86793a504daa4b6389
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/499
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the prefix "spdk" from spdk_reactor_schedule_thread(), add
spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
For SPDK_THREAD_OP_NEW, spdk_reactor_thread_op() calls
_reactor_schedule_thread() and spdk_reactor_thread_op_supported()
returns true.
Then replace spdk_thread_lib_init() by spdk_thread_lib_init_ext()
with spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I232a3b2c6bcaf4d86b0dd3cefacd3e47eadda6d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add enum spdk_thread_op and two function typedefs spdk_thread_op_fn
and spdk_thread_op_supported_fn.
The first operation type of enum spdk_thread_op is SPDK_THREAD_OP_NEW,
and it is used as an alternative to spdk_new_thread_fn.
Add global variables, g_thread_op_fn and g_thread_op_supported_fn, and
then add spdk_thread_lib_init_ext() to initialize these.
spdk_thread_lib_init() requires both of thread_op_fn and
thread_op_supported_fn are specified or not specified.
spdk_thread_create() calls g_thread_op_fn() with SPDK_THREAD_OP_NEW
if g_new_thread_fn is NULL, g_thread_op_supported_fn is not NULL,
and g_thread_op_supported_fn(SPDK_THREAD_OP_NEW) returns true.
Update unit test to test these addition.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56db903f62437f6ff3198248ffc5dede396c22bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_thread_get_by_id(). This will be used in the
subsequent patches to set the cpumask of the running thread to the
specified value.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib5d02b9d7b499477c43e6527cf8f603d8323e063
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an unique ID for each created SPDK thread. Use a single 64 bits
variable, g_thread_id, and guard its update by the global mutex
g_devlist_mutex. For our safety, further thread creation is not
allowed if g_thread_id rolls over, and request user to restart SPDK
application.
Besides, as a minor update, move the debug log down and add ID to it
in spdk_thread_create(), and ID is added to thread_get_stats RPC and
framework_get_reactors RPC.
The thread ID will be used to set the cpumask of the running thread
to the specified value in the subsequent patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic09f11d4c7175c3b89acba6a42e76063acd0d1a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a warning triggered when holding ref to const obj and passing
to these getters.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2c7b4ea0d325d84d66923fc524273ea44a3a311b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Users may only set the transport type, but for the actual probe
process, the trstring field is mandatory, so set the trstring
based on transport type at first. Also remove unnecessary
spdk_nvme_trid_populate_transport() call from each transport
module.
Fix#1228.
Change-Id: I2378065945cf725df4b1997293a737c101969e69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1001
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the autotest, when calling kill_stub() function, there is error log
like this: "Device 0000:83:00.0 is still attached at shutdown!", so it's
better to detach the controller when exit the stub process.
But after call spdk_nvme_detach() in the stub process, there is another issue:
1. NVMe stub running as the primary process, and it will send 4 AERs.
2. Using NVMe reset tool as the secondary process.
When doing NVMe reset from the secondary process, it will abort all the
outstanding requests, so for the 4 AERs from the primary process, the 4
requests will be added to the active_proc->active_reqs list.
When calling spdk_nvme_detach() to detach a controller, there is a
assertion in the nvme_ctrlr_free_processes() at last to check the
active requests list of this active process data structure.
We can add a check before destructing the controller to poll the
completion queue, so that the active requests list can be flushed.
Change-Id: I0c473e935333a28d16f4c9fb443341fc47c5c24f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Solve the problem that the /sys/block/vd../max_segments is always 1 in the virtual
machine,and avoid the problem of low sequential read and write performance caused
by this limitation in the general block device layer of some lower kernels.
Signed-off-by: suhua <suhua1@kingsoft.com>
Change-Id: I3289b4c6c74d9225f34e117f444f310bf8bc8ea2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There are synchronous security send/receive APIs defined in nvme.h,
however, we still need the asynchronous APIs so that we can make the
OPAL library can be used in asynchronous way. As the asynchronous APIs
are already defined in nvme_ctrlr_cmd.c, so just export them to public
APIs.
Change-Id: I5646f342a4bf70faad37daa956476f05a1327bcc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: Id1299bb0d86db57bce48b9787d7f248d29a6f345
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/974
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
According to the spec, if the CC.EN bit is transitioned from 1 to 0,
then all of the I/O qpairs shall be disconnected and the csts.rdy bit
shall be set to zero.
Change-Id: I871170e79e08a9fab8286f9c135c7b3316f58ace
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a way for the transport to query the value of the controller
registers.
Change-Id: Id365ff088989f6f8e74e26ff6f3d435f35bee2f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The first 4 or last 4 bytes of an 8 byte property can now
be written independently.
Change-Id: I894f8349be836511c18c380262eae46951060766
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
while the size of namespace is changed,
the resize event will be notified.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Change-Id: I5d85f17df898dc21c0ae1eb9f529dcb624a457ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/849
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using bdevperf, for example, with CBDMA on a malloc backend
with zcopy disabled, 16 messages like this would appear on
exist (each for a different BDF):
Device 0000:00:04.0 is still attached at shutdown!
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I05dd84c9f6a7c398ac1ee705b1c292530d283042
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is possible for multiple blob persists to affect one another.
Either by blob->state changes or blob mutable data.
Safe way to prevent that is to queue up the persists.
Next persist will be executed only after previous one completes.
Fixes#1170Fixes#960
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaf95d9238510100b629050bc0d5c2c96c982a60c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
_spdk_blob_persist_check_dirty() function will be
called in subsequent patch at the end of persist
in _spdk_blob_persist_complete() to proceed
with any queued up persists.
Please see following patch for this.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieeb334e23cde329743647f728e70dd60333c224a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When allocating a new cache buffer, we will pick up a file and try to
free cache buffers with this file, but sometimes the file lock maybe
hold by other thread, so we use pthread_spin_trylock() here, when
pthread_spin_trylock() return a negative value, we will break the
loop, this is not efficient as the orginal logic, which may result
cache buffer allocation failure, so we will break the loop only when
there is a valid cache free.
Change-Id: I7be2fddb33c38dba466c2fcc2584ccf7ac16ea7a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will allow the requests to be built from non-consecutive write
buffer entries.
Change-Id: Ifbb26c47ea1f3175e6529dba4b89350de92efe8e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fill in the child's iovec during its initialization by calculating it
based on the parent's iovecs and the request's block offset.
Change-Id: I61a1d5cf8a1ceae71e996d50db31077c43c4e3d9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/898
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no need to copy user's iovec, as it's bound to be valid until
request's completion. Storing a pointer to user's iovec is both faster
and simplifies the IO allocation path.
Change-Id: Ia5b37fcbc230edac6f52989c8ef09655af8ec178
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This parameter always has to be the same (device's write unit size), so
it's redundant.
Change-Id: I8775171fe2d526a6e87337e0398f3c9d18bc184d
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added scatter/gather version of the zone append command.
Change-Id: I6f999be335fe3e896456ca7e17d0f02743f06ca1
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow ftl_io initialization with a iovec array instead of a single data
pointer. It'll make it possible to use the vector version of the IO
commands.
Change-Id: I34c1e398cea681f59321605e081366785aa29128
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reloc move should not be put back to move queue
in ftl_reloc_free_move().
Change-Id: I9c84238b9f716e6e73a251e833f32661d17a7eab
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch improve FTL initialization time.
For 16TB volume it reduces init/restore time
by about 30 seconds.
Change-Id: I76463c5447b983eb9428c0317933d06c40b2974e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Since read thread was removed user IO read
should be processed on user thread.
Change-Id: I4088c215e342ac6ef1255057617a0a12976129aa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Process IO retries on IO channel poller. This patch
replaces retry queue associated with device with the
queue associated with IO channel. This patch also adds
putting IO write request on retry queue in case write
buffer is full instead thread message sending.
Change-Id: Iec9c9a4e858c90f1fe344bb298ff13ed0e13397f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/543
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do not complete user IO writes immediately but put them to IO
channel completion queue. This allow to complete IO requests in
batches and reduce need of unnecessary message sending in bdev layer.
Change-Id: I1bd1e076ff31e9e5faef70f9d0b3512d8f3a31b7
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/542
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Given enum was not aligned with spec. This status can be reported when
size equals 0.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If51f6b051c13880c1fd4e6bb0a02f134b28b5a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is memory optimisation as transport id is 'heavy'. As a side effect
simpler handling of listen and stop_listen on transport specific layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4e9d0e0c5eee2d570ec4ac9079270c32d5afb8db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch fixes condition used to change zone state.
Zone write pointer is an offset from disk beginning and
was wrongly used as an offset from zone.
Change-Id: I6cd42c6db78003812ec6d6bc75550bb7a5b067ca
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/954
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Startup RPC only to avoid issues trying to switch while in use.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f1801905de0927f3610c4065182dd8fa88cdfdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
* Moved code around in accel framework as the sw implementation
is included in the same file (it's always present) so that its
easier to differentiate framework functions from sw accel
* Renamed some functions for the same reason
* Added/edit comments to clarify things
All in prep for extending the API to more functions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I465ee743d999999df4c06e3f68feddcd73c6e6a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will come in handy in the new poll group API.
Change-Id: I9cf14082270b28b35f4a440c5cb2471c81e374ba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/578
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be useful in the upcoming spdk_nvme_poll_group api.
Change-Id: Id83340a2ce9887817312f5aac38db4de8c588974
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/577
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1 warning generated.
LIB libspdk_nvmf.a
iscsi_subsystem.c:1285:25: warning: Result of 'calloc' is converted to a pointer
of type 'struct spdk_iscsi_sess *', which is incompatible with sizeof operand type 'void *'
g_spdk_iscsi.session = calloc(1, sizeof(void *) * g_spdk_iscsi.MaxSessions);
^~~~~~ ~~~~~~~~~~~~~
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieb8dcac8ec172405c5ca97a4867582ff9bfaa569
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Dry run processing in iscsi_parse_portal() now only checks if
portal string is not NULL. Portals are managed not by fixed size
array but linked list now. Hence dry run processing is not needed
itself now.
So remove the dry_run parameter from iscsi_parse_portal() and
the dry run loop in iscsi_parse_portal_grp().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib7cb444b51581b8ee603388aad34bc58d1cc9023
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Global session pool had been freed immediately after starting
connection shutdown. iSCSI connection shutdown is asynchronous.
It will be safe to free global session pool after completion of
all connections shutdown. Hence move free(g_spdk_iscsi.session)
from spdk_iscsi_fini() to _iscsi_fini_dev_unreg().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4c16930a0e861a190115049cba3739ec01f0a8a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Login acceptor still runs on one of the default reactor threads,
but we move iSCSI poll group from the default reactor threads to
dedicated threads created at startup.
At startup, use reference count to detect completion and
move to the next step. By returning completion message to the init
thread, we can avoid using any atomic operation.
At shutdown, we can use spdk_for_each_channel() conveniently. Put
voluntary spdk_thread_exit() calls into the callback to
spdk_put_io_channel().
Moving login acceptor to a dedicated thread is another task.
To maintain the original behavior, number of threads created is
the number of cores that SPDK app uses.
Change-Id: Ifd1de9343ac0183254ca608d1fd8faa94acc254e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to the next patch. We don't have to pass
iscsi_parse_configuration() as an argument of
initialize_iscsi_poll_group(). We can refer iscsi_parse_configuration()
directly in initialize_iscsi_poll_group() instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I96715399e68ebfa0d292c0b4591d271e975e1a04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The next patch will create a SPDK thread for each poll group at
startup. Hence iSCSI connection will be created or destroyed on
these threads. On the other hand, logout request to the active
connection will be still invoked by the default thread.
This unmatch will hit assertion such that poller is unregistered
different thread that registered it.
Fix this unmatch by sending message to the thread explicitly to
request logout and wait for the logout process to start.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iff361e78b9ba077230e38d9586f7187968e33314
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The next patch will create a SPDK thread for each poll group at
startup. Hence iSCSI configuration management will be done by
different thread from these poll group threads.
Hence send message explicitly to add connection to poll group even
at startup. We can do this for the current master branch.
Remove some code related with SPDK thread framework from unit tests
for iSCSI portal group because thread management is moved to
connection.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I40cacdb2066f65866f7ef83cf3b3e4e8b8cd322e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qpair might be deleted with incomplete requests (e.g. when NIC
is removed or when huge amount of qpair are being destroyed
simultaneously), this reduces the capacity of the transport
buffers pool. Check that qpair qd is nonzero and process
requests whose state is not FREE. Processing of requests
when qpair is being deleted leads to their release.
Change-Id: I0e42b5cb78f35add9f37942db77781db72c1e59c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of variables have types which don't match their
usage in code
Change-Id: Ic2bd5fd6561c70143dde436ce9cddc0be4d3b0d0
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This field is not used in data path, so move it to "cold" data
Change-Id: I25f2fdb3aff613f9e16a2e13b2b06f8180a60fb2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows to avoid calculation of ioccsz bytes on each request
and removes access to "cold" ctrlr structures in data path.
Add UT to check validness of calculation
Change-Id: I55ceff99eb924156155e69a20f587a4f92b83f0b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These data buffers can't later be freed and need to be carefully
managed by the host. Also, this is very likely slower.
Change-Id: I0d205c0c7136e0aa972e927361bd88e765d218c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the transport doesn't define one, don't call it.
Change-Id: I8b83132f9fc0accbd4faa8fa0fc17a6bd11e543e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is allowed by the specification, but preventing using both
of these features simultaneously will make some upcoming patches
much simpler.
Change-Id: I1abb7d9c02c105a50b1603bfab8eec2025289123
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Keep them grouped together for clarity.
Change-Id: I51be01802b69aa722dec458fda56e4e396edbfeb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Destroy subystem if spdk_nvmf_subsystem_set_sn or spdk_nvmf_subsystem_set_mn
failed. Check status in spdk_rpc_nvmf_subsystem_started callback, destroy
subsystem and report an error on error.
Fixes#1192
Change-Id: Id6bdfe4705b5f4677118f94e04652c2457a3fdcc
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Memory maps might be dependant on one another, so
make sure their dependencies are unregistered after
the dependees.
Change-Id: I3853dfe51bacc70d0b27976a3df9c0ae9253ebac
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/833
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When there is no free cache buffers, we need to free some cache buffers
based on very simple algorithm for now, when deleting a file or unload
the blobfs, there must no dirty caches, there is no cache buffers after
calling spdk_tree_free_buffers(), so we will create another cache free
buffers function which only used in file read/write path.
When testing blobfs with db_bench, there maybe multiple threads will
call alloc_cache_memory_buffer() at same time, and spdk_fs_delete_file_async()
maybe called at same time, and it may release file->tree and file structure
without holding g_caches_lock, so here we will change the
alloc_cache_memory_buffer() to hold the g_caches_lock while releasing
the file cache buffers.
Fix issue #1133.
Change-Id: I115ff97113915630f539c3458c57116d9ff16179
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
_file_read() is only be called in spdk_file_read() API, and we only
need to count the children IOs sent to the backend, and skip the IOs
which hit the cache buffer.
Change-Id: I36e4a464e5810beaf30f1b580dc15ea3d3a68582
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/667
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ASAN will report memory leak if we didn't free the old thread context,
it's related with Rocksdb version, I didn't get this issue with Rocksdb
v5.6, but Rocksdb v5.14 and v5.18 will complain the memory leak.
Change-Id: I116cad6c1bc723a60284a5c7cf1e78d10efa9ddd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/666
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the reactor main loop, _spdk_reactor_run(), check if both
spdk_thread_is_exited() and spdk_thread_is_idle() return true,
and if they are true, then remove it from the queue and call
spdk_thread_destroy() to delete it.
By previous patches, the exited thread does not accept any
new message or poller, all pending messages are processed, and
all unregistering pollers are completed. Hence we only need to
have very simple check in the reactor main loop.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib678245de98a5c050843e6435026bdcf8b6c75c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
The comment in the header file has already said that all associated
I/O channels must be released before calling spdk_thread_exit().
This patch actually checks if it is satisfied in spdk_thread_exit().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ac50b561c6ca91d3dc2d60c21c8d91d38f081b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EBUSY if the thread has any
registered poller. We enforce all pollers including paused poller
are unresitered before the thread is marked as exited.
By this change, a bug was found in reactor_perf test tool. Fix it
by adding spdk_poller_unregister() and add the g_ prefix to avoid
future potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7f40357c9a6f4101b3998ea0da3cc46cc435031
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EINVAL if the thread is already
marked as exited. This will be helpful to detect wrong call sequence
of voluntary thread termination.
Besides, update reactor shutdown and unit test framework shutdown
to incorporate this change accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2296c61e273bf4d9580656dcbc2da0e8a8f3bcf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
One of the subsequent patches will allow thread to exit only if
all of its pollers are being unregistered. After the thread is
marked as exited, only unregistering pollers will remain if the
exited thread does not accept registering new poller.
Hence in this patch, we change spdk_poller_register() to fail if the
current thread is marked as exited first.
Then, in subsequent patches, if we remove break from poller
processing in spdk_thread_poll(), poller unregistration of the exited
thread will complete, and we will be able to support voluntary thread
termination easily by checking only the thread is exited and idle.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5b843a07049ef01a5ff402eb521e294182ce2ae2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
By the last patch, the asynchronous release of I/O channel will
complete even after spdk_thread_exit() because pending messages will
be reaped.
Then this patch stops new allocation of I/O channel after
spdk_thread_exit().
Hence we will be able to release all I/O channels for exiting
thread within finite time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I48a45bcba7c4b2c62d8c9d398ac35a584b533627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Previously, the exiting thread had discarded all pending mesasges.
We change this to stop accepting any new message in spdk_thread_send_msg()
and reap pending messages in _spdk_msg_queue_run_batch().
Add unit test case for the new behavior. Adding g_ prefix to global
variables for clarification is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ida78e7bb1b86357602aea6938dd514897b67edd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add spdk_thread_is_exited() to check if the thread is marked as
exited. This API will be used by reactor to destroy the thread
which exited voluntarily.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2086984b7813e8a1f401852fde7ab263bcf8ef60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Rename all variables and comments related with timed poller from
timer_poller to timed_poller.
This patch was originally to count poller and add the current
value to thread_get_stats RPC. This will be realized to add
thread_get_pollers RPC instead but renaming will be valuable itself.
So keep only renaming in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I73880b8df6ed35391383e0890f76b4e509690e06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
To track the ZCopy IO stats like IOs and Bytes read and written.
Change-Id: Iab2c4d8397aee5d746db9491bd4e8ac4eea69529
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We only have the generic transport wrapper now.
Change-Id: Ib1487e9c7b7ba3b573f5ea47597ad6eac1c5407e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/734
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the transport plugin system, this is no longer necessary.
Change-Id: Ia73878599658db84150603223ac811cb5a34ffba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/713
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the transport plugin system, this isn't used anymore.
Change-Id: Ib81c73f262d44edb6c937ca0056ac027b1e1ca75
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/712
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All of the code now goes through the transport plugin system,
so this isn't necessary.
While doing this, caught a bug that the get_registers function
wasn't being set for the PCIe transport.
Change-Id: If19a933e0c6f656bc55232b15d59052e22af3ee9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/711
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is meaningless for network devices, but will be useful
when emulating the more complete register state of local devices.
Change-Id: I37052e514101c298a1f66cc72135a8c3dd669003
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This doesn't do anything for a network fabric, but it doesn't
hurt to allow these commands to set the emulated register
values for AQA. This will be more useful when emulating a
physical NVMe device.
Change-Id: I2891d7a07a5dceff50c6d66a8ce0b6b7c22a79f8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The custom command handlers are registered by outside software.
Move the implementation from lib/nvmf to the nvmf_tgt application
to match the intended usage.
Change-Id: Iedb7ae5356f195dfb5bb465975808c8749d16f32
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a public header that needs to be accessible to
code outside of the SPDK project. The spdk_internal/
directory does not end up getting packaged - it's just for
headers used by multiple libraries within SPDK.
Change-Id: I14e1ab4fda4b0ee779203d190a266240b10be6ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/413
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This defines the official interface that NVMe-oF target
transports may use. For now, all code is just copied
from elsewhere. Eventually we'll want to add doxygen
comments.
Change-Id: I0cd9368607544be18c7c49188d071e38ceb59b8f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
init_ctx and fini_ctx from dev structyre was redundant to initialization
module context. This patch merge those structures and keep initialization
and deinitialization context private for init module.
Change-Id: Ic94bc813112b265642933bc8183acb1961a0c01a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ibv_query_qp can return nonzero value if e.g. we received
IBV_EVENT_DEVICE_FATAL. Remove assertion not to break SPDK
in debug mode
Change-Id: I00b3bef448a69e2f43ee90e5466b2d78b55d8a08
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This event can occur for either qpair or listening device. The
current implementation assumes that every event refers to a qpair
which is wrong. Fix: check if the event refers to a device and
disconnect all qpairs associated with the device and stop all
listeners.
Update spdk_nvmf_process_cm_event - break iteration if
rdma_get_cm_event returns a nonzero value to reduce the
indentation depth
Fixes#1184
Change-Id: I8c4244d030109ab33223057513674af69dcf2be2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ftl_wptr_ready() return value is true or false so
it should return bool instead int.
Change-Id: I653e4ee1271d54f2e8c7b6fa0144a468faec4607
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Zone state should be changed to "full" when zone is
fully written.
Change-Id: Ib9ad29d1a0e788fba8a7eae881e07d384fa90548
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since zone reset is private for core thread it will be
always issued from core thread.
Change-Id: Ice03d339cb59548690ccf8f48d7c1606ee408a59
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Sine core module is responsible for handling IO it
should also handling zone reset logic.
Change-Id: Id8be4bb221cc85f207d44bd45761a72e263ea5ce
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Context:
Every-time the SPDK starts, it creates a large file under
/dev/shm (130 MB in my setup) which is never removed when
the application terminates.
The number of trace entries can be tuned using the SPDK runtime
option 'num_entries'. A value of 0 for this option considerably
reduces the size of the trace file (few MBs) but it is still
created.
This patch adds a special case in the code when num_entries=0:
the trace system would not be initialized, and the trace file
would not be created in this case.
The rest of the code properly handle the case where the trace
system is never initialized.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: If54a548de4a2ce2def8e57d527d0dc20bc55fe4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/606
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
fdump puts out buffer in following format:
"00000000 76 61 6c 00 val. "
Each buffer is displayed with hex values up to maximum, then
followed up with a value. This is done to keep starting value
with the same alignment between each consecutive line.
Value contents should end at its length instead of
adding trailing whitespace.
After this patch, output is changed to:
"00000000 76 61 6c 00 val."
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I26b327e83f296ba3865f1a337f4a70764a80e2b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483706
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
the purpose of this commit is to avoid an entry into the error log in
the case that a thread does not exist, since there is no separate
function to check if a thread exists
Signed-off-by: Jesse Grodman <jgrodman@gmail.com>
Change-Id: Iec79b87e11e411bde59004baae1dc996864cec4d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481576
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When reset operation is ongoing mark zone as busy
to avoid write operation on it.
This path fixes issue #1171.
Change-Id: I30097e1db1bfbbabebd7e6adeab6e8810dc8b2b1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483264
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It fixes memory leak e.g. when add_listener rpc called twice with the
same trid on the same subsystem (ref = 2). In such case kill or
remove_listener decrements ref only once.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib19f2e50838feff1c9108957ee82a42da66e54a2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows to configure desired retry_count instead of using
hard coded value
Change-Id: I25c9601997ace916dfb735469a4b443c0cd2a96b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482499
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some functions performed incorrect header/data digest
support check, align it with NVMEoF spec. Use a table
to check if PDU supports digest depending on its type.
Change-Id: I6170dd19ace017f37fda0a923f604732799460b9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483375
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdevperf tool had not called spdk_poller_unregister() called on the
same thread that called spdk_poller_register(). But it had not caused
any issue because spdk_poller_unregister() simply set the state to
unregistered. This design flaw has been fixed recently.
However the new pause feature has been added to poller and this
design flaw might cause any unexpected behavior if paused poller is
unregistered.
We do not know any other case such that spdk_poller_unregister()
is not called on the same thread that called spdk_poller_register(),
but we have no way to know it even if it exists. Hence let's add
assert for such cases.
Parsing poller lists managed by thread may be another option but
spdk_poller_unregister() is performance critical. So we do not check
list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d91daaeb81fa33d5f042dbe7ddbd8ab6ea98d55
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_put_io_channel() was designed to be called on the same thread
that called spdk_get_io_channel(). spdk_put_io_channel() sends a
message to its own thread, to allow the context to unwind before
releasing the resources. This had the side effect to allow an
incorrect thread to call spdk_put_io_channel(). This patch will fix
that.
Bdevperf tool had a design flaw that needed the side effect, but
it was fixed recently. We do not know if we have any other case.
Hence add assert to spdk_put_io_channel() to find other case.
We found that unit test for blobstore had called
spdk_put_io_channel() and fix it together in this patch.
Besides, correct the comment for spdk_put_io_channel() in
include/spdk/thread.h not to create any other case in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ec7bf074818abef43b23ca40bc9385adac70a75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479390
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is no need to support read operations on separate thread.
Change-Id: I10b595b8eeaf5fd0182f05913fdd5baa4b84961f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
"ocssd" pool name is no longer valid.
Change-Id: Ie9671d9598633ebf165570419a9bbe89e539b04e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Adding support for handling media management events.
Change-Id: I1b87143ddd360e314385e8dc70359aeb0d526b5a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In order to handle media management events spdk_bdev_open_ext()
should be used instead spdk_bdev_open(). Move this call to ftl lib
to keep media management events internal to the library.
Change-Id: If4c9382cc89fc537667923f00d3dae5df0ace248
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added spdk_vmd_fini(), which detaches all PCI devices acquired by the
VMD subsystem.
Fixes#1148
Change-Id: I43218ef5f9a764546b655c28688897fb91b779cb
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482852
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It allows to property set (e.g. cc) when subsystem and qpair are not
active.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I0b0d150fbdac5bdf0d20762337f0a811f4d6d243
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481494
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This internal interface allows to create nvmf ctrlr and connect io
qpairs on add listener rpc request (i.e. when subsystem is stopped
and listener is not yet on subsystem's list).
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I998cb72ed773094faacc6668cf069ba9e2a6bf50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481409
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Had to remove one part of a unit test because the null
checking is moved to a different function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I0a95d0a9a9a5708416fdc7efefb36e17b1ffe010
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480008
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
trstring variable in spdk_nvme_trid_populate_transport is not
initialized, that can lead to snprintf() writes some garbage to
trid->trstring if the user passes SPDK_NVME_TRANSPORT_CUSTOM trtype
Add return statement and assert to CUSTOM/default switch
Change-Id: I6c6c37f9aa74d61b346f7be27fb890c7a34e9229
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483469
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When attempting to decode a base64 string, while there is a way to
calculate the maximum possible decode length, there isn't a way to
calculate the exact decode length without duplicating some base64
specific logic located in spdk_base64_decode. With this change, the
spdk_base64_decode function can now optionally calculate the exact
decode length without actually performing the decode by passing NULL
in as the dst argument.
Change-Id: Ice83db979f86a6fe9f39d236d3083102ca37ec68
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For nvme_ctrlr_cmd_format command status should be used as
nvme_completion_poll_cb callback argument instead of pointer to
local variable.
Change-Id: Id65cb395d137c4e907c1ef019b131e8822ddfe34
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
With recent changes to extent on-disk metadata format,
new format (Extent Pages) is not backwards compatible.
Meanwhile old format (Extent RLE) is backwards
compatible with older SPDK applications.
Summing up:
Blobstore created pre SPDK 20.01 can only use Extent RLE.
Blobstore created starting with SPDK 20.01 can use both,
Extent Pages and Extent RLE specified by use_extent_table opts.
When use_extent_table is set to true, invalid flag for it is set.
SPDK application pre 20.01, will not load such blob.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If14ebd03f19eb581d71dcb46191e099336655189
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483220
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows us to avoid trying to map the same physical address to the
IOMMU in physical mode while still making sure that we don't
accidentally unmap that physical address before we are done referencing
it.
Change-Id: I947408411538b921bdc5a89ce8d5e40fd826e971
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483133
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The fuse command value is a two byte value, but we were only checking to
see if the fuse value was equal to SPDK_NVME_CMD_FUSE_FIRST or
SPDK_NVME_CMD_FUSE_SECOND in spdk_nvmf_ctrlr_process_io_fused_cmd. If a
haywire initiator sent a command with a fused value equal to
SPDK_NVME_CMD_FUSE_MASK, that would result in us skipping all checks and
dereferencing a null pointer in
spdk_nvmf_bdev_ctrlr_compare_and_write_cmd.
To fix this, add an extra condition to validate the cuse field.
Change-Id: I1ec4169ff5637562effd694f7046c6e3389627f1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483123
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This was observed after running nighly tests on previous patch.
As part of it, autopackage.sh compiles SPDK
without debug flag set. Exposing the uninitialized var here.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iedb1641f3c0d4a21f293c81cd4fcf35c6d1c7ae5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482893
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Extent table and extent page descriptors are now
set to be default way clusters are serialized on disk.
With this patch UT are ran with and without
extent table.
Changed two asserts in test, since amount is dependent on
which type of serialization is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica58fce6a4effd014d7dd40ee26edd0fa3196d0f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
ctx->extent_page signifies if page was allocated
for insertion.
1) It is possible for a thread to claim extent page
on its own thread, and put it in ctx->extent_page.
If conflicting thread allocates another ctx->extent_page,
then it should be freed. This does not mean failure
to insert cluster. As different threads could have
been trying to allocate different clusters,
so condition on line 6716 does not cover it.
If so then it shouldn't be an issue to release
the claimed ctx->extent_page and proceed with updating the
extent page which originally won the race.
NOTE: if clusters were conflicting, then extent_page is
freed in _spdk_blob_insert_cluster_cpl().
2) At this point of _spdk_blob_insert_cluster_msg()
we already verified that there already is
extent page allocated at "*extent_page".
In such case ctx->extent_page will be 0,
and should not be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id5b57c88248890eee60d2e7dbecbd984c98b561b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
sz is set to number of clusters that should be have been
in particular unallocated EP (remaining_clusters_in_et
up to SPDK_EXTENTS_PER_EP).
The cluster array should be set to 0 only in region
between original size (cluster_array_size) and new
total size (active.num_clusters).
It was incorrectly using sz in the memset.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic43e89c17d53e9529e3ed0349aeb4fb7dc6593f2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously part of function assumed that cluster count
1)means number of clusters in EP and another 2) that it is
following the active.num_clusters (akin to extent_rle).
This was incosistent and showed when using multiple
extent pages to serialize metadata.
This patch changes it to only go with 1), so it is clear
that it means number clusters within particular EP.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I155104cabc127ed47df04434032fb01e08948e13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Following changes are done in this patch:
1) _spdk_blob_serialize_extent_table now persists
at least single extent page. When num_extent_pages == 0.
2) Minimum valid size of ET descriptor is even without
extent_pages. This is a case when there are no EP,
but we still want to persist num_clusters in ET.
3) Taking above points, redone the loop for serializing
extent pages.
4) Make sure to mark blob dirty if any new extent pages
were allocted.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I81dc6cf2de2722bb49927ed42f4b9f31292f78c5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482847
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Changed assert checking if cluster array is allocated
when loading extent pages. This is true only for
the first extent page being loaded, of course after that
the cluster array can be already allocated.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f96294ede5a12ffd6bca73cbeadba8d94a35bac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482857
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Size of a blob (thus size of clusters array in mutable data)
is known from extent table descriptor.
Extent pages were read sequentially in order they were
placed in extent table. This meant that cluster
array could have been filled up from beginning to end.
Yet reading extent pages in any other order,
would result in incorrect placement of clusters.
This patch adds first cluster index that is contained within
each extent page. This will allow to read/write
multiple extent pages in parallel, since
we will know where in clusters array to put the cluster idxs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib6b9332111cd93f990d057dc60624152907dd87f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A pointer to a stack variable is passed as an argument to
nvme_completion_poll_cb function, later this variable is used
to track completion in the spdk_nvme_wait_for_completion() function.
If normal scenario a request submitted to the admin queue will be completed
within the function which submitted the request.
spdk_nvme_wait_for_completion() calls nvme_transport_qpair_process_completions
which may return an error to the caller, the caller may exit from the
function which submitted the request and the pointer to the stack variable
will no longer be valid. Thereby the request may not be completed at that time
and completed later (e.g. when the controller/qpair are destroyed)
and that will lead to call to nvme_completion_poll_cb with the pointer
to invalid stack variable.
Fix - Dynamically allocate status structure to track the completion;
Add a new field to nvme_completion_poll_status structure to track status
objects that need to be freed in a completion callback
Fixes#1125
Change-Id: Ie0cd8316e1284d42a67439b056c48ab89f23e0d0
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481530
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is more adequate name, since this value if first read from
Extent Table descriptor. Then decreased when iterating over entries in
extent table and extent pages are read.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib188c524b8488b38d4de063a9970dcfdf49c9acd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482600
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When replaying md chain for a blob, extent table
descriptor can be read. When it is present, all allocated pages
it points to are now being put into extent_pages array in ctx.
If multiple extent table descriptors are in single md chain,
the array is expanded accordingly.
After replaying single md chain is done, replay extent pages
starting from last one. Replaying extent pages, is similar to
extent_rle in that each allocated cluster is claimed and
number of free clusters in blobstore decreased.
When all extent pages are read, return to
_spdk_bs_load_replay_md_cpl() for continuing replaying
next valid md chain.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4573226aff7d7b1bcdfd188518235c8d4b68a4c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481621
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_spdk_bs_load_replay_md_parse_page() is only used in
replay path during blobstore load.
Next patch will expand the load ctx with array of
extent pages to be read. It is filled out when reading
in-chain metadata of extent table descriptors.
Passing the load ctx here will make it simpler to
fill out the array when processing extent table.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If96e6670560c8c4a3610f33ece14c354d7d5da39
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When EXTENT_TABLE descriptor is found when parsing metadata
that means there can be extent pages to read.
If extent page was not allocated, number of clusters can be
increased depending on the num_clusters_in_et.
Unallocated extent page contains either SPDK_EXTENTS_PER_EP
or remainder of num_clusters_in_et worth of clusters.
Depending which is less.
Added decreasing fo num_clusters_in_et to parsing
extent pages as well.
While here, remove ctx->seq = seq assignment as that is
done at beginning of blob load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I57f54634b908ffb406f3e91e15841b7f36fd6de6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476429
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new serialization of changed extent pages before persisting md.
Iterate over active extent pages (not array !). When they are
allocated but not yet present on disk - write them out.
All extent pages in clean mutable data are assumed to be written out
already.
So there are two cases here:
1) Active mutable array is larger than clean
All allocated extent pages should be written out.
2) Cluster allocation created new extent page
Blob has to be thin provisioned and persist was called
as part of cluster allocation. New extent page needs to be
written out and EXTENT_TABLE allocated.
Iteration is done over num_extent_pages instead of extent_pages_array_size,
to prevent writting out too many extent pages when size of blob was
made smaller. The two values come back in sync at the end of persist
either way.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I780819fd7f3c44e4cf5d71c188c642536d3cc320
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479851
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Right now output from _spdk_bs_cluster_to_extent_page()
is used to determine whether the exten_table is used at all.
If NULL pointer was returned this meant that extent table
was not allocated, even if the code might suggest just
checking if we overran the array.
To make it more obvious, the _spdk_bs_cluster_to_extent_page()
now only asserts the extent_table_id.
blob->use_extent_table is now always used to determine the
serialization path.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9d2630645213539bae5cd1d72e5f9b878f53c2bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482599
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch add single EXTENT_PAGE updates on cluster allocations.
There are three possible outcomes after inserting a cluster:
1) blob uses EXTENT_RLE
Proceed to usual sync_md.
2) blob uses EXTENT_TABLE and extent page was not yet written out
Update the active mutable data to contain the claimed md page,
write out the EXTENT_PAGE and sync_md to update EXTENT_TABLE.
3) blob uses EXTENT_TABLE and extent page was previously written out
Only serialize that single EXTENT_PAGE and write out the updated
cluster map for it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia057b074ad1466c0e1eb9c186d09d6e944d93d03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470015
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Force number of Extents to fit into Extent Page to
be power of 2, in order to simplify calculations
on cluster allocations.
At this time SPDK_BS_PAGE_SIZE is 4k, which would
results in SPDK_EXTENTS_PER_EP to be 512.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e09d92b00dfe5c12d7dd10ac0fc5a9a10d526ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Similar to EXTENT_RLE, this descriptor holds LBA of clusters.
Difference is that EXTENT is kept in separate md pages,
and only single EXTENT will be updated on cluster allocation.
This patch adds the EXTENT processing, which is not used
until following patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifbac23db7ca3e7c8c91cee01018f20071f0d5160
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Added claiming the extent page.
Which is then followed by updates in updates
of mutable data on md thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If511564f812685381c48924310105a4cb6f63cd1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Functions to claim and release md pages were added.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1c8ddc13c8a5806fb874e5c34dae2a327e1ff248
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3e49c398d9bdf9f4eacba65061cc7fe4b300fb56
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this patch extent pages array will change it size accordingly
to size of the blob. Similar to clusters, only resizing up
is done on blob resize. Shrinking is done on persisting the blob.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id7f7c81efbd96af414fce9fc4045cbb476cc93a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Extent Pages claim and insertion can be asynchronous
when cluster allocation happens due to writing to a new cluster.
In such case lowest free cluster and lowest free md page
is claimed, and message is passed to md_thread.
Where inserting both into the arrays and md_sycn happens.
This patch adds parameters to pass the Extent Page offset
in such case.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I46d8ace9cd5abc0bfe48174c2f2ec218145b9c75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new descriptor SPDK_MD_DESCRIPTOR_TYPE_EXTENT_TABLE.
Extent Table will hold md page offsets for new Extent Page descriptor.
Entries in Extent Table are run-length encoded 0's as unallocated
Extent Page descriptors.
Additionally total number of clusters is persisted in each Extent
Table descriptor. This is because there is no guarantee that
last Extent Page of a blob will be allocated.
Even if number of Extents per Extent Page is always the same,
Extent Page can hold less Extents than that.
This patch does not add more metadata on disk right now.
Only added descriptor parsing/serialization and applicable fields
to store it in run time.
Following patches are going to implement TODO's added in this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iac5d8f00ddfc655c507bc26d69d7adf8495074e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466920
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Lets get it removed ! :)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I91b994a883a642d87ecc8c152c801b8a7676f33a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since further patches will be adding new descriptors
that are related to cluster layout throughout the blobstore,
add description for existing descriptor too.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I722eb633445685789d5185ed59dfc910f76b109f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is an additional option that can be passed when creating
a blob.
When opts->enable_extent_pages is set to false (current default),
only EXTENT_RLE should be persisted on sync.
During blob load, when EXTENT_RLE is present in md,
blob->extent_rle_found is set to true.
When opts->enable_extent_pages is set to true,
only EXTENT_TABLE and EXTENT_PAGES should be persisted on sync.
During blob load, when EXTENT_TABLE is present in md,
blob->extent_table_found is set to true.
It is possible to find neither EXTENT_* descriptor when loading a blob.
This means that blob length is 0 and EXTENT_RLE was supposed to be used.
Yet none were persisted due to lack of clusters.
In such case blob->use_extent_table is set to true after finishing
blob load.
When parsing metadata ends, if extent_table_found is set - then
support for extent_table is enabled. All other cases disable it.
At this time path for Extent Pages is not implemented, so it should
not be used.
Later in the series, it will become the default path for serialization.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2146da6130a0645e686ab02a3b5d2d86a7d35a1f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479853
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a command arrives and no requests are available, the socket
recv state machine sits in the RECV_STATE_AWAIT_REQ state until another
network event occurs. If this I/O was the last one sent, this leaves the
target hung. To fix this, when a request is completed, kick the state
machine to make forward progress.
In practice, this can only occur once the pdu send acknowledgements are
asynchronous relative to arriving commands. That only begins happening
with the use of MSG_ZEROCOPY. When MSG_ZEROCOPY is turned on, it's
possible receive the next PDU in a chain for a command prior to seeing
the acknowledgement that the response that triggered that PDU actually
sent.
Change-Id: I556f31ad56970d36aa3538cfde375d35f3d4e551
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480002
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, the R2T was sent and if an H2C arrived prior
to seeing the R2T ack, it was processed anyway. Serialize
this process.
In practice, if the H2C arrives with a correctly functioning
initiator, that means the R2T already made it to the initiator.
But because the PDU hasn't been released yet, immediately processing the
PDU requires an extra PDU associated with the request. Basically, making
this change halves the worst-case number of PDUs required per
connection.
In the current sock layer implementations, it's not actually possible
for the R2T send ack to occur after that H2C arrives. But with the
upcoming addition of MSG_ZEROCOPY and other sock implementations, it's
best to fix this now.
Change-Id: Ifefaf48fcf2ff1dcc75e1686bbb9229b7ae3c219
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function was only called from one spot.
Change-Id: I856f564d3ef6c6157be7a32a2cd812c702516a8d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482003
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This seems like a more descriptive name
Change-Id: Ia616865b3fb36d8f9ccc5fb2ca6185bdd8543cf8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
With our target design, there's no advantage to sending
multiple R2T PDUs per nvme command. This patch starts by
setting up the math so that at most 1 R2T PDU is required
per request. This can be guaranteed because the maximum
data transfer size (MDTS) is pre-negotiated in NVMe-oF
to a reasonable size at start up.
It then proceeds to simplify all of the logic around mapping
requests to PDUs. It turns out that the mapping is now always
1:1. There are two additional cases where there is no request
object at all but a PDU is still needed - the connection response
and termination request. Put an extra PDU on the queue object
for that purpose.
This is a major simplification.
Change-Id: I8d41f9bf95e70c354ece8fb786793624bec757ea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479905
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
We can always accept up to the maximum I/O size in an H2C,
so eliminate the #define.
Change-Id: I349dab5f9b6ec482a7c580b1396e03c8d30a250b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482278
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The resources allocated to a queue pair do not need to be directly
correlated to the queue size requested by the initiator in NVMe-oF, as
long as enough resources are present. The RDMA transport, for instance,
does complex pooling of the resources behind the scenes when using a
shared receive queue.
Simplify the resource allocation for a TCP qpair to just always allocate
the max allowed queue size right away. This is a configurable parameter,
so system administrators can adjust for their needs. The initiator may
then request a queue size less than or equal to that, which will only be
enforced by queue depth counting and not impact the actual number of
resources allocated on the target.
This change relies on the MaxC2HSize being equal to the Maximum Data
Transfer Size (MDTS) reported. That is the default configuration, but
MDTS is configurable. Changing the MDTS with this patch to a value
larger than 128k will cause the target to break. This is addressed in
the next patch in this series.
Change-Id: Ibd4723785c6a4d8d444f9b7bbfa89f98de2320f5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479733
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
These values do not need to be negative.
Change-Id: Id9f798cf1c9da354448f9c6fbb90e599f877bb32
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482277
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By releasing the just-completed PDU prior to calling the callback,
for flows that immediately submit another PDU inside the callback,
the just-released PDU can be immediately reused. This reduces the number
of PDUs required in the pool to continue forward progress to half of the
previous value, while also making it more CPU cache friendly.
Change-Id: I8031b8f9f57ac05f261d96433d9899fe5e31d318
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479904
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we unlock a range, we remove the range from the
locked bdev list before doing the for_each_channel
iteration to remove the range from each channel.
But at the same time, right after removing from the
locked list, a new lock on that range could start.
In that case, we also do a for_each_channel to add
the range to each channel, and that will race with
the for_each_channel remove. When the lock start
wins, it finds the range already in the channel,
but doesn't set the owner_range which results in
a seg fault when the for_each_channel completes.
The fix is actually rather simple. We just add the
locked_ctx to the comparison when checking if the
range is already in the channel. If the locked_ctx
matches, then we know it was added as part of
initializing a new channel. If it doesn't, then
we create a new range object pointing to the new
locked_ctx. The first one will get removed when
the remove for_each_channel catches up.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94f8b20376dd437f404add35744d42fc148303ff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482620
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a locking operation has to wait because of an
existing lock, we queue the lock context. When the
existing lock finishes unlocking, we restart the
queued lock context. But we have to make sure
we restart the lock context on the same thread it
was originally submitted, since it has a channel
associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I555515f3adfc3c13a86584c601ed541d605980b7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482463
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For ACWU we always set value 1 because bdev holds
information specific for namespace only. This value
actually does not matter because we also set NACWU
which makes ACWU irrelevant. We set ACWU because
NVMe specs requires ACWU != 0 if fused commands
are supported.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ida4357026d3b32677fc824b3cd878e7ad8ef2680
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477915
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is required for NVMf implementation
for compare and write fused command.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If41611f5c0b8e4ed8eec66f09858c724f1800d59
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477914
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add call for spdk_nvmf_bdev_ctrlr_compare_and_write_cmd
function in spdk_nvmf_ctrlr_process_io_cmd function
when fused command is discovered.
This patch also removes redundant defines for fused flags.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I61971a56577ab32b52e1fde1e572f718a9a2d9aa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476621
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move fused cmd related code from spdk_nvmf_ctrlr_process_io_cmd
to separate function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic662a968b054f05db7f6e1cf4fa9aa13f6fb7c40
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces new spdk_nvmf_bdev_ctrlr_compare_cmd
function which implements support for compare operation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadf402a6441a78ea0e6468f1066c6b0e10e63b9b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477782
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces new function that is a part of
upcoming support for fused commands.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I019c587bee7fd0f745ec17c141baf4cb7bf86645
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476611
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new function for getting NVMe specific return code
for fused commands. Also changed one of the return codes
in fused commands so that we could distinguish error
cases.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I86417ea4f5b8f3e6496162be3d6c6128076e35d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481666
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change fixes a merge incompatibility between commits
50cb6a04ac and
708ed4fb6e.
Change-Id: I5bc71a3c214667f01de66857cf61b9eb25f6cf6b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482586
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the event that we have more than one event outstanding for a qpair
at the time of destruction, we need to ack all of the events, Luckily
the synchronization is already there in the form of the ctrlr lock.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib297598f2e28d9b9bd83e904f950795a61fa883a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A new API was added `spdk_bdev_io_get_aux_buf` allowing the caller to request
an auxiliary buffer for its own private use. The API is used in the same manner that
`spdk_bdev_io_get_buf` is used and the length of the buffer is always the same as the
bdev_io primary buffer. 'spdk_bdev_io_put_aux_buf' is called to free the
auxiliary buffer.
The initial use case is crypto, in the next patch in series it is used. No UT were
added as the logic isn't that complicated and it is fully tested with each run
of crypto.
Fixed a comment typo also (not mine for once).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1939fcbc8e5db36fd909ef26771a725a551e8e6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478383
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To avoid partial write issue of this PDU.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id9b22da844c75ae53c6881850d192b40ac4098ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481948
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: To prepare for the further patch submission.
Since we do not need to keep this variable too late.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibaa100925e1ea317253d4fe7e560917e063fcf6b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482290
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since only after DATAIN pdu sending out, we can have
free slot to handle queued data in tasks.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49a52597e8660453ea90c5960d020eb53f81265d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482048
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is prepared for the further call back usage.
Change-Id: Iccf304c87e67debfb4e7c330acc9cc233cc3ec48
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481917
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch eliminates the flushing logic and simplies
the writev logic. And this patch can also improve the performance.
We support async write for PDUs other than login response, logout response,
and text response in this patch. We will support async write also for them
later in this patch series.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I243f598f297d594da0bb18466bc47dab918ed3ee
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481686
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will not enable the live recovery feature for SPDK internal vhost library,
so we unmask the protocol flag for internal vhost library.
For the purpose to make it can be compiled with latest DPDK version, some
mandatory APIs are required, so add them here.
Change-Id: I34fab7ed90c86a0fb612852a47f6cadeb8a072f3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482069
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is a spdk_nvmf_tgt_listen() which opens a port for specified
transport (trid) which opens possibility to accept new connections
from initiators. However there is no counterpart of this function
(i.e. spdk_nvmf_tgt_stop_listen()), which would stop listening.
Instead the current code relies on spdk_nvmf_subsystem_destroy()
to stop the listener, which seems to be wrong.
Fixes#1129
Change-Id: I6e73d8c234dc451f0fee8394132eae34cd4f4756
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479873
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Amortize the writev syscall cost by using the writev_async socket API.
This allows the socket layer to batch writes into one system call
and also apply further optimizations such as posix's MSG_ZEROCOPY
when they are available. As part of doing so we remove the error
return in the socket layer writev_async implementation for sockets
that don't have a poll group.
Doing so eliminates the send queue processing.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Change-Id: I5432ae322afaff7b96c22269fc06b75f9ae60b81
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475420
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initiator drivers (e.g nvme/tcp) don't use poll groups but rather directly
poll the qpair. In this case we want to allow the polling function (e.g
_qpair_process_completions()) to flush async writes pending on the socket.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Change-Id: Ibd8c73691213d58e287b7110d0f5a381a89a64d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replaying md through _spdk_bs_load_replay_md_cpl() starts with
md page 0 in search of first valid md page starting a chain
for particular blob.
When it is found, next pages read are from the current pages
`next` page - next in chain.
After whole chain is read, it goes back to first page in chain
and starts search for next valid chain from there.
This patch adds separation between reading particular chain,
and moving to the next one.
Moving on to the next one happens in _spdk_bs_load_replay_md_chain_cpl().
Further in the series, extent pages will be added in the metadata.
Those are not within any particular blobs chain of metadata,
but spread out over the md region.
It is not enough to read all md and read extent pages.
In case of power failure, only extent pages known to be valid
are the ones which are pointed to by some valid md chain.
In futher patches, a step will be added after reading particular
valid md chain to go read extent pages pointed by it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6e7cd64af66ce5db0abd2ad5962d604ac2b30994
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481900
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Moved finishing of unloading to separate function,
which is now called on every failure and success when unloading
the blobstore.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I34539b78c5cc63a6fe5891014cba89b9eb62d4df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482009
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Before this change it was possible to fail at
writing out some of used md pages.
bserrno output of those was not verified.
This patch adds it at every step.
With that two function don't need (and never needed)
to pass the bserrno:
_spdk_bs_load_write_used_md()
spdk_bs_load_complete()
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a61763f03665ba1b00e5949ef0cf37eefaaf08f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482008
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is simplification of load path.
seq is save in ctx already, no need to pass it to the function.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ief0ddc1826c461adbad71ba1a3897c510ec2a971
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482007
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not inlining all host to controller operations breaks the target within
the context of fused commands. This issue was discovered when enabling
the compare-and-write fused command. Only the write command buffer was
being inlined which caused the write to jump the compare in the
transport specific state machine on the target side before our fused
command checks in the generic code.
Change-Id: I9e52ae6160e01ffd36d20429ffc8459491c729ef
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482001
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should check the thread's state at the end of message callback, or
we may leak the message memory in case the thread was set to exit state.
Change-Id: Ifb67c3b5c39440c411eca1d045c11e8aa6c514cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482206
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow for some reuse in future patches adding
support to get auxiliary buffers from the bdev memory
pools.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd4e71d0e918cfe940c749e40cd1cc6c560e25a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482022
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be helpful in future patches where auxiliary
buffer support is added, and we have a different
type of callback to invoke.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81d2cf3057e706a0e68de87a20b24c194205bbd5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482021
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Assigning seq to ctx was done very late in the process.
To keep future functions lean and without the seq,
it is assigned immidietly after starting.
Only functions in load path that require separate
seq argument are those passed directly to read/write
device operations.
Rest of them can just use spdk_bs_load_ctx.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2bd610dc4c7b4a7b0c3de92391922475c514326a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481899
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
No functional change is done in this patch.
Most of the functions already translate cb_arg to ctx and
use it, but then just pass cb_arg.
This will make it clear that it is ctx that is passed around.
Along with simplifying some of changes in next patch,
where arguments of functions will be cut down just to
the ctx.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If7d8ed38dc92175d867a2231ab2ebd4f2499efcd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482006
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This patch creates new _spdk_blob_persist_generate_new_md()
function that is responsible for generation of new metadata
from current state of blob.
Functionality so far is unchanged.
This is preparation for later in the series where new
extent pages will be written out to disk before metadata pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I84158cb8316a881a6170ac37e151a60aaa9d7369
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479848
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
On blob load, read in the saved clear_method option. If
BLOB_CLEAR_WITH_DEFAULT was passed in, use the setting stored
in metadata previously. If something other than the default was
specified, ignore stored value and used what was passed in. If
ignoring a stored value, print a warning.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia0c81fa0adc175dfaeb74c06e1ac91dc6b27e9ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Accept a clear method option on blob create by adding clear_method
to the opts structure passed in to _spdk_bs_create_blob(). Store
these 2 bits in md_ro_flags so that earlier versions without an
understanding of these bits can not alter metadata.
The new metadata values will be used later in the series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5440645ca20b426778d13b2e544b65dc2b3b83c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To clarify what seems like it might be unintentional.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id14b49e8b7bc2372ecb8dd7579e6797a395c2cf2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477363
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This commit sets the optional admin command flags
in the identify structure based on whether handlers
for these optional admin commands are specified.
Change-Id: If4aa36a414b0811dafaadbc1094e6c2628d21b39
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479446
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This commit provides the capability to install a
custom admin command handler for NVMF.
It can be used to implement or replace NVMe admin commands that
are currently not handled by the NVMF subsystem.
The handler implementation is pretty generic and the handler function
has to figure out what to do with the command based on the bdevs
that are configured for the subsystem.
In cases where admin commands need to be forwarded to an NVMe bdev,
the commit provides functions that allow access to the underlying bdev.
There is an example handler in lib/nvmf/custom_cmd_hdlr.c.
Change-Id: I4f9d538c53669c176a836e8bdd379db0070a87dc
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <jacek.kalwas@intel.com>
In current version, immidietly following parsing all
metadata pages an action is taken inform of loading the back_bs_dev.
Patches later in the series will add more metadata in form of
extent pages, which have to be read separetly from usual
blob metadata pages.
This patch add separation between the two steps,
so later a device read can be put between.
Additionally, _spdk_blob_load_final() when no snapshot was present
passed bserrno which was always 0. This patch just sets 0 directly
there as no errors occured at that point.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4a77527f90bb1de12f972591067b7a50926f39c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This was calling a callback for another function which
attempted to release the request. The code only worked because
in the r2t case the cb_arg was set to NULL, and that makes
the request free function do nothing.
Change-Id: Id9ec30ceb0eaa41deb67aa995da5d6f786d9b9f0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479903
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't actually used. Every PDU only had a single reference.
Change-Id: I8adaa7edeca5fe175aa853c156df741170d76c10
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479902
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update error handling of spdk_nvme_wait_for_completion_robust_lock to
differentiate cases when request is completed (possibly with error)
or polling was aborted by transport/device error
The function returns 0 on success, -ECANCELED if transport/device
error occurred and -EIO if the request is completed with error
Change-Id: Ibf7f3c330317af0d8f27ba9cd10d8b773f6a796b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481529
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Update error handling of spdk_nvme_wait_for_completion_timeout to
differentiate cases when request is completed (possibly with error)
or polling was aborted by timeout or transport/device error
The function returns 0 on success, -ECANCELED if transport/device
error occurred or operation timed out and -EIO if the
request is completed with error
Change-Id: I314f40d1acaa6cfa9b88e5417b1ee2c9801bbbd6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"lbk" name is more OCSSD specific so in
generic FTL "block" name is more suitable.
Change-Id: I792780297b792bf5e02f13cc20346da56b032918
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472284
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Zone append command allow to write to the
zone with queue depth greater than one.
Append location is read during write
completion callback.
Change-Id: Ie08ce8d31d5d0fb521cdc2b95f3e29b92e02e63f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471627
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Lba map could be updated during write
completion. This change is needed to have
common io path when append support will
be added.
Change-Id: I942bfd8b54dc6b40136ca53434f0ef8e3c415c5b
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch removes parallel unit and zone id fields
from ftl_addr struct.
Change-Id: Ica42208eafdbbecab60430708197f5f3ba6167d6
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
For admin as well as for IO operations the ioctl should return
NVMe status code.
Change-Id: Icf8efde674b847fb03e5532f47c00b1c2cdcf328
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477492
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This would allow to respond for add listener rpc request even
when there are async calls in transport specific function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I94a9f45b7ba9e8d46a60ae3785953cea12554732
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make common code as part of successful return.
In rdma check if already listening first.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib0c87ac11db7daff00dc4042c9e0ab20eb7ffd0f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Prepare for setting priorities for different
kernel based sock implementations.
The g_net_impls list is maintained in decreasing order
according to the priority of each sock implementation.
For examaple, if there are 3 sock implementations, i.e.,
posix (priority = 0), vpp (priority = 1), sock_ut (priority =2),
then the list will be maintained as:
sock_ut -> vpp -> posix.
Then if users use spdk_sock_open/listen with impl_name as NULL,
then the order to try is: sock_ut, vpp, then posix
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I43899de5bac14751ab060a11eb814cd7a0a83cc6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479488
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: With this patch,
(1)We can support using different sock implementations in
one application together.
(2)For one IP address managed by kernel, we can use different method
to listen/connect, e.g., posix, or uring. With this patch, we can
designate the specified sock implementation if impl_name is not NULL
and valid. Otherwise, spdk_sock_listen/connect will try to use the sock
implementations in the list by order if impl_name is NULL.
Without this patch, the app will always use the same type of sock implementation
if the order is fixed. For example, if we have posix and uring together,
the first one will always be uring.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic49563f5025085471d356798e522ff7ab748f586
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478140
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that we have a more flexible function table strategy for
transports, we can get rid of some of the wrapping we were doing
to match the macro definitions exactly.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I12c868babfa7bd27dc8ed5e86d35e179f8ec984f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This new api function will enable us to work with custom transports.
This is needed to enable properly parsing and comparing custom transport
IDs that may all resolve to the same enum value.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I26aa3cb8f76f8273f564799d9b2af8041ea0d219
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function previously accepted a trtype enum, but needs to be able
to accept a string to support custom transports.
Change-Id: I931aed30ca3be65468552ffa1bb1ef3f91275fda
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For custom transports, we should use a range outside the spec value
to identify them.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I82b29c349e143b8906f79ce2de818def116a3fe4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The trtype should be stored as both an enum and string. This is intended to
help pave the way for pluggable NVMe-oF transports.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6af658d7a17c405e191ff401b80ab704c65497e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Compare and write fused operation num_blocks should
not exceed value of 'atomic compare and write unit'.
In case of NVMe native support we should read this
value from 'namespace atomic compare and write unit'
if set in namespace identify data, otherwise from
'atomic and write unit' field in controller identify
data. If bdev does not support this natively we should
set this value to 1.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib1ea02dbf9d1eed476d9dd0114ea96b1376e0c45
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch replaces NVMe Open Channel API usage
inside FTL library with corresponding zone bdev
API calls. This include following calls:
- spdk_nvme_ctrlr_cmd_get_log_page -> spdk_bdev_get_zone_info
- spdk_nvme_ocssd_ns_cmd_vector_reset -> spdk_bdev_zone_management
- spdk_nvme_ns_cmd_read -> spdk_bdev_read_blocks
- spdk_nvme_ns_cmd_write_with_md -> spdk_bdev_write_blocks
Change-Id: I1b5a6863d9ce72f4af1cfbb0e449fc1a5b638144
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Just to make all sizes consistent and less error prone.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id0a21bbd45954a0f2317e0eefd3725f1542ef04f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479961
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed size of check in _spdk_bs_snapshot_newblob_open_cpl().
Rest are just to make all consistent and more error prone.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5a23a7795f1e598c1cfd6d17ce37b367f2f34df8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479960
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The _spdk_bs_page_to_lba() [without 'md'] is only for translating the
pages on the blobstore to lba they are at. Those pages start at
the begining of the device and cover all of it. Thus simple
math is enough to translate those.
It is used to calculate lba_count for set of pages as well.
Meanwhile there are 'md_pages' which are the same pages as for
the above, but their count start at bs->md_start.
Which is right after super_block and couple pages for bit masks.
This patch creates new _spdk_bs_md_page_to_lba() that is more
explicit in what page number is passed. Hopefully avoiding
confusion when reading which page number refers to which
'type' of page.
Exception to the that is _spdk_bs_dump_read_md_page(), where
blobstore is not actually loaded (md_start from super block
is not copied to bs structure).
Additionaly providing assert to catch errors on debug builds.
Making the check in _spdk_blob_load_cpl() for max_md_lba obsolete.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I66bbca55b5ca3d6794c462d50177e6037ddbefa6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479017
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added new field in bdev_io structure for tracking
number of IO retries. It will be used in future patches.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8e002e93f54c9ce39c7af0dd3a1960e6aea93580
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will only support a vectored variant of
compare-and-write for now.
This does no locking for now. Ii will be added
in a separate patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5bd075c912de60090e19cf8fced19c4879fcc900
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475941
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This commit exposes some internal functions and enums
in preparation for the custom admin cmd handler functionality.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: Iec15c1f3d9cba5db267f6e43f3d929cf382ca8f4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can't allow overlapped locked ranges - otherwise
two different channels could be deadlocked.
So add a pending_locked_ranges to the bdev. When we
start a lock operation, check if the new range overlaps
one that's already locked. If so, put it on the pending
list. When an unlock operation completes, we will
check if any pending ranges can now be locked.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2e3113216a195887b954533495ff200df14fadc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Keep a mutex protected list of the active locked ranges
in the bdev itself. This is only accessed when a new
channel is created, so that it can be populated with
the currently locked ranges.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id68311b46ad4983b6bc9b0e1a8664d121a7e9f8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477871
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an io_locked TAILQ to each channel, which hold
IO that will write to a currently locked region.
Also add a new step to the locking process per channel.
Each channel needs to wait until all existing outstanding
writes to the newly locked range have been completed.
Only the channel that locked an LBA range may submit
write I/O to it. It must use the same cb_arg for the
write I/O as the cb_arg used when locking the LBA range.
This ensures that only the specific I/O operations needing
the lock will bypass the lock.
When a range is unlocked, we will just blindly try to
resubmit all IO in the io_locked tailq. This could be
made more efficient in the future, but we don't expect
this path to occur very often, so going for simplicity
in the first pass.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdc992144dfaffe7c05471a5b3c020cedd8cdfc3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478226
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds new internal APIs bdev_lock_lba_range and
bdev_unlock_lba_range. To start, these APIs will
manage dissemination of lock/unlock requests to all
existing channels for a given bdev. This does not
yet interact at all with any I/O sent to the channel.
Future patches will check new I/O to see if they
are trying to write to a range that is locked. Future
patches will also ensure we do not have overlapping
ranges active at once.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d5b1cc84b41a7adc2a3c5791c766bb77376581f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be used by upcoming patches for implementing
LBA range locks.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa4ad8dcc0d09ccf20d35f010fcae19dcc17abc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
When using internal vhost library, there is a warning information:
taking address of packed member of class or structure may result in
an unaligned pointer value [-Werror,-Waddress-of-packed-member].
DPDK disable this check by default, so we will do it same for
internal vhost library.
Change-Id: I6fb12d5f5339ccb03bb85196f9c100d0521e4620
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479501
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Commit 1a1cbdf30 changed the struct spdk_vhost_dev to have static
cpumask variable which broke the complilation. This patch will
fix that.
Change-Id: I8d0ef90f491e4fc4f0fae6faff2909fd3bd68053
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479500
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The patch adds new interface for issuing messages during interrupts,
such as signal handlers. Without this, it'd be possible to deadlock
the application, as two different messages could be trying to enqueue to
the same ring, in the same call stack.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I917aa41b7f3415af7c7a7d5fa91b964d727609b6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478290
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This new function allows specifying some of the extra
cdw10, cdw11 and cdw14 bits added in the more recent
versions of the NVMe specification.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08a7840ad066b08fe557a2e7b974df491646978f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479737
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
SPDK virtio library was first developed based DPDK virtio_net library, since
we will maintain this library in SPDK now, so we will remove the direct call
to DPDK library here.
Change-Id: I6a9121a13fcac0ba49563956cf347fb9ad0f9845
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We do sent the two missed socket messages when running virtio_user.
Change-Id: Ie19fccf6414c2aa42b70fecb6ba02b2a1ee46dd5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: Ia4c6ec7b245600bca895f7802fb7f68c8d0400e4
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479845
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: I9e0a569e9dfd0e8b8236c0840ce10b92362c4996
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479844
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: I09f671a9c6539cc259c297514b24978587c9b392
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: I09781323b2ee25dbcee61eecf95ce7eca703ab93
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
There is no need for spdk_ftl_module_(init|fini)
after ANM functionality was removed from FTL lib.
Change-Id: Id8d05aed8620217869c56fca35b490bc9c716541
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
ANM logic should be moved to ocssd bdev.
This patch temporarily disables ANM handling
by FTL library. New ANM handling mechanism will
be introduced in future patches.
Change-Id: I7d0261ee4e42496f60b82fbf6b39d9f84690024f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
There is no need of tracking position of zone inside
band.
Change-Id: I1488f23ccfd1f7eee1bd85fdb7ef8ace08ffca40
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Parallel unit is not needed anymore in ftl_zone
structure.
Change-Id: Ie8d78e3ccf64db84aff19ad2ce11e662d4f3f724
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468345
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moving to zoned bdev API will not allow to setup
physical range of underlying device so we need to
remove such capabilities from ftl device.
Change-Id: Ia807a11e992a221fce906d4ab122a6c3b1391280
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467949
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
FTL library is consuming whole OCSSD device
so punit parameter is not needed for bdev ftl
configuration.
Change-Id: I56f62ea6d09b3157b70c02ccfffcd3cb07ba4597
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467950
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
FTL working on top of zoned bdev doesn't need
physical page address (PPA) anymore.
ftl_ppa was replaced with ftl_addr which represents
zoned device addressing schema.
Change-Id: Ied5750a7ab2f4ce42067ff3e69c1f26f85f5022a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467633
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Remove some Open Channel dependencies from ftl_ppa struct.
Change-Id: Ic088b84c56a928906c6c01c6ef74e69be6d0107f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479549
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ftl_ppa address do not need to expose group
information when FTL will move to zones API.
Change-Id: Iece1b32f9bcd8985260668c953089eb9951f13cc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
It is faster for the kernel to pin memory in hugepages, so allocate
the pdu pool from hugepages. This will help more
with upcoming changes to leverage MSG_ZEROCOPY.
Change-Id: I9ce581acca9c6edb71bd8119258966e3b405db77
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475801
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
All transitions to the EXITING state go through the disconnect function
now
Change-Id: Ia55816351b2998bfef26130b6ffdc4a1010567a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470533
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function can't actually return NULL. It aborts if we get
our math wrong.
Change-Id: Iaf77112addc3c14c70755a56043c5dba3427890d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478911
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use spdk_min to get the copy_len in spdk_nvmf_tcp_send_c2h_term_req.
It confirms copy_len it's not larger than SPDK_NVME_TCP_TERM_REQ_ERROR_DATA_MAX_SIZE
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Id343928e1911e4ab77fca7463f3f0cc55889db30
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479118
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function returns information if compare
operation is supported by device.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I321e9bf6d146ac8d14ea4549cb4380735b30be6f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds first_fused_submitted field in spdk_nvme_qpair
structure which is used for postponing ringing a doorbell for
fused commands.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibfc43931891ebaadbafa4895c05af9f228440210
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The only reason the qpair ever uses the port is to get to
the device attributes so skip the middle man.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib14a97ceaa0c49176027d6c35c5cb2787a845cc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Here should add close(kickfd) and close(callfd) when abnornal
return of failed to send VHOST_USER_SET_VRING_ENABLE.
Do this as the same with upper abnormal return.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Ic61fc3f398f582f64da6b3f6ca7e237a3d411a8f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479123
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Features are not saveable by the controller as indicated
by ONCS field of the Identify Controller data.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I7e5bc2c701f5857e2c1481e8370b070089f88111
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479128
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
UT also added for the block aligned write and verification
of the written data.
Change-Id: I8751f437c71dd7f3a4556fee420460d6dffdd4e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478424
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is useful to have sct and sc on request completion explicitly.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If429123589694ba36111330699fee22238f8a557
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
There are for loops to do these calculations for vhost session memory region.
we can inline these for both in vhost_session_mem_register and
vhost_session_mem_unregister.
It not only removed the duplicated codes but also reduced the stack consumption.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Idb9f5ea13e09aef6b24fa27a2bb809b15ece50e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Replace usage of fprintf(err, *MSG*) by SPDK_ERRLOG(*MSG*)
since in SPDK we always prefer later
Change-Id: I3e2b5c12caa572b32236f5ede01b754b2e1e2a53
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478940
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Always when creating a snapshot, new blob is created.
That blob is explcitly set as thin provisioned with size of
the original blob in _spdk_bs_snapshot_origblob_open_cpl().
Thus it should always contain empty cluster map,
as API user has to interaction with it yet.
As sanity check for debug builds, verification if all clusters
are 0's is added.
This empty cluster map is later swapped into the original blob
in _spdk_bs_snapshot_swap_cluster_maps().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4b935c0cf08917e9ad7b9bbedac4781890626eec
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478974
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Refactor blob loading when snapshot is present.
All paths now go through _spdk_blob_load_final().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc927de6800501cdf62dba8d73e950af2a46d568
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479143
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since all error paths for blob load are now the same,
they can go through common function to handle
freeing and calling the original cb.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib3afc7e62b6f9c872bb1d5f72ef61170aee966d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479142
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Originally the code was suposed to determine if
loading the blob succeeded, based on passing the
cb_arg.
This breaks the logic of always getting the cb_arg in
cb_fn, and basing the success on bserrno.
In order to fix this, cb_fn always gets the passed
cb_arg. Meanwhile the cb_fn (_spdk_bs_open_blob_cpl(),
now checks the bserrno to determine failure.
In addition since _spdk_bs_open_blob() was the original
caller allocating the blob structure,
the _spdk_bs_open_blob_cpl() is now responsible for freeing it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic7eb09f05e04b08dc54fc43243fd576f493cbeb2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The sequence was saved into the load context much later
into the loading, instead of right when ctx is allocated.
This will come in handy in later patches that refer to
sequence earlier (in error paths).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibe513dbd919f36874fcde763fc96d46973b60446
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Match DPDK's iova assignment strategy so there are never
any conflicts.
Change-Id: I3863487f9bd247c40edbf0d0d3a8c880bdad1708
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_reactor_enable_framework_monitor_context_switch and
spdk_reactor_framework_monitor_context_switch_enabled had been
a little long and not easy to get the meaning.
spdk_framework_enable_context_switch_monitor and
spdk_framework_context_switch_monitor_enabled will be a little
more concise, and hence change the names accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f1d50e8b62846cbd0f91b94f94cbaf16fefa39b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I18c260bb10bdf1c7aa5e00aa81a171f2ff50c7d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6dc29f591f7112512be8a67b180b056150f467b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This API will be used in the upcoming reactor_get_stats RPC first.
This API is not public but internal in SPDK. Add necessary unit test
together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I761ffe3c8d6d8da4594c0d728b479f9f40275fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Add check if reactor scheduled the thread to one of the allowed
cores correctly to _schedule_thread().
This check will be useful in the next patch and may be helpful
when we schedule SPDK thread dynamically.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibea8e8315187ae8a3a421007d8865bbee2d7e037
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the recent effort, use local instance of cpuset instead
of using cpuset pointer and allocating dynamically to it in
spdk_app_start(). This change will avoid potential out of memory
failure for application startup too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I22b529da13e893db16296167f2d8d4c296dec31f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Following the recent effort and the last patch, allocate g_tmp_cpuset
statically in lib/vhost/vhost.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5ed6179f9d5942cd868be008c3be6c35d755b455
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Following the recent effort, allocate struct spdk_cpuset statically
for struct spdk_vhost_dev. In vhost_dev_register(), a dynamically
allocated cpumask had been set to spdk_vhost_dev, but change it
to spdk_cpuset_copy(). So use local cpuset instance in vhost_dev_register()
accordingly.
To reduce the size of patch, this patch doesn't include the change
for g_tmp_cpuset. This will be done by the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic97753d1f470cbfd9ae7fc7f2af8ced5a31c8477
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478578
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Minor optimisation done by code analysis, both cmd and dif are
overridden in TCP_REQUEST_STATE_NEW.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6bae4ddae175035d029c0693f7e4351b95a296ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the case of bdev initialization, the memory could
not be allocated. When cleaning up, it needs to check
whether the memory pointer is valid or not before
touching the address of the pointer.
This is to fix below issue:
https://github.com/spdk/spdk/issues/1126
Change-Id: Iec0e2c5a40ad153a96fb939414a15ac3b9112a01
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478849
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <box.b.chen@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The discovery target support the keep alive timeout so
it should also support the keep alive cmd.
Change-Id: I08bd3312c17962c97c96fdd1469246fe97d5e8e7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478016
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch is for the vhost-blk live recovery feature
which can make spdk recover from crash or killing.
The relate rte_xx functions are in the the shared memory
protocol patches which have been merged in DPDK 19.11.
Change-Id: Ia0ac99f8ba0bd66dc9f525f2c72bd1de141ec596
Signed-off-by: Li Lin <lilin24@baidu.com>
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471235
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Add the protocol_features in vdev. There are two features
would be used in vhost device one is the virtio_features
the other is the vhost-user protocol_features. For different
vhost device, the supported features are different so we can
separate them.
Another reason is that I tested the VHOST_USER_PROTOCOL_F_
INFLIGHT_SHMFD in vhost-scsi with QEMU(version:4.0) and found
that Qemu can not boot up. After investigating found that inflight
flag is negotiated but the Qemu doesn't support this feature
and in DPDK function it is handled as an error and disconnect
with Qemu. It's a bug in DPDK and will fix it.
Change-Id: I72e418cb1885bf7dcbd0285d9cec1ad6af0665de
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478814
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Recent effort to unify NVMe NQN length macro replaced
'FCNVME_ASSOC_HOSTNQN_LEN' with 'SPDK_NVME_NQN_FIELD_SIZE' in
include/spdk/nvmf_fc_spec.h. This change updates the downstream files
which are also affected by the change.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I44e1de50067e11fabacbb69cf1c42331f3339bc8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
In this case, we want to add --legacy-mem if it was
not already specified. This means we need to check
if strstr() returned NULL.
Reported-by: Alok Kataria <alok.kataria@nutanix.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib99dd015ce6e3ee824e4b543a8379d7291e2671e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478634
Reviewed-by: <alok.kataria@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The printed error message could be the folowing example.
Device 0000:00:04.0 is still attached at shutdown!
Device 0000:00:04.1 is still attached at shutdown!
Device 0000:00:04.2 is still attached at shutdown!
Device 0000:00:04.3 is still attached at shutdown!
Device 0000:00:04.4 is still attached at shutdown!
Device 0000:00:04.5 is still attached at shutdown!
Device 0000:00:04.6 is still attached at shutdown!
Device 0000:00:04.7 is still attached at shutdown!
Device 0000:80:04.0 is still attached at shutdown!
Device 0000:80:04.1 is still attached at shutdown!
Device 0000:80:04.2 is still attached at shutdown!
Device 0000:80:04.3 is still attached at shutdown!
Device 0000:80:04.4 is still attached at shutdown!
Device 0000:80:04.5 is still attached at shutdown!
Device 0000:80:04.6 is still attached at shutdown!
Device 0000:80:04.7 is still attached at shutdown!
I think this issue exists a long time in our CI pool.
And the root cause is: "spdk_pci_device_detach" function
is not called in "ioat_channel_destruct".
This patch should solve this issue.
Change-Id: I47b3f1104a407c5b8390c9389c2f231ae018d16a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478837
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is starting point for moving current FTL
implementation which is working on top of
Open Channel NVMe driver to work on top of
abstracted zoned bdev.
This patch is changing name of ftl_chunk structure
to ftl_zone and start using zone states from zdev
interface.
Change-Id: I5429f489cc08a1ac27f09aba3dca4b40ea95eeb3
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
For nvme Opal, most of the commands are a combination
of security send and receive. There are cases that
application send the security send command and is
shutdown before sending security receive command.
In these cases, when the application restarts, an opal
command will send security send command again and will
cause command sequence error.
Thus, we do a receive first and memset the response
buffer before security send and receive.
Change-Id: Iba02c8074457919816ca576cd00ef9eee6d6dadf
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472591
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's not wrong, just to keep consistency with other functions.
So remove these.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I833211ea8ee6c6b02c874ea340a3f936a0c4c00f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478684
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The call to update_ibv_state could result in a segfault if the other
thread had already freed the qp and was just spinning on handling the
rdma event. By not updating the qpair state here, I don't think that we
lose any information about the qpair state. Especiallyy since just a
little bit later we update the qpair state to be in error.
There is nothing in the man pages about the cm events changing the ib
state although I imagine they are closely related. I just say that
because I believe that's why the update was originally in that spot.
fixes: GitHub issue #1110
Change-Id: I3f87ff009bc2019464ed7c6920dd71e2b286b3fd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477877
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It will be the expected behavior when the error message will
printed if we use asynchrounous I/O. And the real
error message for not getting the tcp_req is located in
spdk_nvmf_tcp_capsule_cmd_hdr_handle.
Change-Id: I1a608fbd3a04050eacb6cb68eafd50e5128925ab
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
nvme_rdma_register_rsps returned ENOMEM for all failure cases. All of
them are not directly related to shortage of memory. Every point of
failure now sets relevant return code.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ia340f6c6fd3a68d8c34acfefc2c9224ffcdcad3f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477302
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA work requests generated between two calls to NVMe RDMA QP
processing function are chained into a list and then posted together
to a queue in next call to processing function.
Batching improves performance in scenarios with deep queues and heavy
load on CPU. But it may cause latency increase on smaller
loads. Batching is configurable with RPC methods and configuration file.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I600bce78427eb7e8ed819bbbe523ad318e2da32b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462585
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In some real data center deployments, 100ms is not enough. Increase
the timeout to 1 second.
Change-Id: I8195a1c1e987b7eff2d8541509f79381be32ed4b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478638
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In vhost-blk, choose supported features based on what
backend bdev supports instead of disabling not supported features.
This will prevent from enabling not supported feature in runtime.
Change-Id: Ie9453c7c02eb6d0a0ff0f1887048f4092cb7b14f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replace usage of rte_vhost_driver_enable_features() by
setting disabled_features field dynamically.
This patch doesn't change functionality, but simplifies
initialization and removes usage of socket operation.
Call to drive_enable_features() had to be done when
features field was static, but now it is mutable so
the call became redundant.
Change-Id: I6efc63883773e4ba6d931efd057a38a705c53217
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This will enable us to make features dynamic, dependent on underlying
backend device, and to remove usage of rte_vhost functions in
vhost-blk implementation which will improve encapsulation
and enable us to write tests that use vhost-blk functions directly.
Dynamic features are used in vhost_blk, but backend structure is
assumed to be static, so we had to call
rte_vhost_driver_enable_features() after registering it with
some features initially disabled.
This patch moves feature fields to vdev structure where it
can be set dynamically.
Change-Id: Icd76bdd76a3d67ec74e0ac992d8da639beead593
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
These bdevs claim native support for zcopy operations. They should
actually support them when running on top of a bdev that claims zcopy
support.
For example, if you were to build a part or passthru bdev on top of a
malloc_bdev (which is just for testing primarily) and then try to run
bdevperf on top of that, you will currently get errors. This patch fixes
that problem.
Change-Id: I023557a3a5b1baf177cc29f1cbc1cd391cc67a8a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478243
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
struct spdk_cpuset has been declared in the header file and
so we can allocate struct spdk_cpuset statically. This change will
avoid potential out of memory failure for reactor too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic5f4fdb493d73b4ae11cddd2638eeb84ebbb792e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478150
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_thread_poll returns only non-negative value now, and the return
code check is not reasonable now. For just in case we may want to add
assert(rc >= 0) but compiler gives warning because rc is not used anywhere.
So just remove checking return code check here.
We noticed first that spdk_thread_destroy was called without spdk_thread
exit but this change removes spdk_thread_destroy. So the issue is also
fixed together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e7f5c09faf5eda68ea8d42320dbefdca88bbd21
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the requests which don't have children requests, SPDK may queue them to
the queued_req list due to limited resources, in the completion path, we
may resubmit them to the controller. When the controller was removed
the submission path will return -ENXIO and we will free the requests directly,
so the callback will not be trigerred for these requests. Here we added a
flag to indicate the request is from queued_req list or not, so for the failure
submission, we can triger user's callback.
Fix issue #1097
Change-Id: I901ac81733c2319e540d24baf5b8faa1c649eb35
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477754
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Error log had been collected if PDU ref count went negative. However,
error log is not easy to notice. SPDK iSCSI target is more stable
than before and SPDK iSCSI task has such assert. Hence replace
error log by assert for PDU.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I28c4f5e29f0dfd72436b0131e09f9707822165fc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Followin the last patch, move iscsi_conn_abort_queued_datain_task()
and iscsi_conn_abort_queued_datain_tasks() from iscsi.c to conn.c.
Refine unit tests to check more accurately. Adding more test cases
will be done later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I30530e6871a78a58d9fb472f62168862298884a0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Treat active pollers similarly to timed ones and don't discard
unregistered poller's rc. This patch is basically a copy of 7d3d2b62e
but for active pollers.
Change-Id: Ia85e73a6736b2924601150f8e61995eb56009c15
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added spdk_poller_(pause|resume) that allow a poller to be paused and
then resumed at a later point. These functions come in handy in cases
when a poller is known to be idle until a certain event occurs.
Change-Id: I7f21c80eb9ac4e8e1cf24d66f99da5687aafe358
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477920
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Media management event was introduced. It's sent out to notify that
some portion of the data needs to be rewritten (e.g. due to data
refresh, wear leveling, high error rate, etc.). This type of
notification is only utilized by devices exposing raw access to the
physical medium (e.g. Open Channel SSDs).
Change-Id: Ia30faa5866d71fd597009b441f69c609de974161
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use a lookup table with function pointers to build
the request depending on the payload type and SGL support.
This change helps to remove several if/else branches
Change-Id: I506e4290efc218be68fc8cfda4835b242a99aa77
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Command with cns SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST is issued during
controller initialization and if the controller supports SGL,
this command will be built as a contig SGL. This leads
to a failed completion with the following status:
INVALID FIELD (00/02) sqid:0 cid:95 cdw0:0 sqhd:0004 p:1 m:0 dnr:0
The first identify command SPDK_NVME_IDENTIFY_CTRLR passed since
it was built as a PRP command - we didn't know that the controller
supported SGL at that time. Fix - do not build SGL requests
for admin qpair
Change-Id: I72ab7fe33c03e60ea9f20a9c8afd7c79c40843aa
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To avoid the hang if there is no response
from the target.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib68a9e4c1a28436af2b2ae65891de04067e3dc7d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the reduce_dev_destroy case, we were not calling
alloc_zero_buf in the load path because of a built in short circuit.
This resulted in us decrementing the g_vol_count variable past 0 in
cases where we were destroying a reduce volume that we had already
freed. This resulted in us failing to allocate the g_zero_buf the next
time we loaded a reduce volume.
Change-Id: I429cbac1454bdcda502038af659d5302627ecab2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of arbitrarily selecting the chunk size of the first device we
attach, we should make it an arbitrarily large value that can fit larger
chunks.
Change-Id: I4e8b54cbae62607e352402025ca3dae01ebfbb51
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We also need to make sure that the deconm_iov is large enough to handle
all of the iovs we claim to support plus 2, one for offset into the
chunk when doing writes and one for the remainder.
Plus a unittest to demonstrate the possible out of bounds error in the
library.
Change-Id: I7747ad39f76e50f25ecf5168b01e046f71fa0ea8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478125
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a timed poller unregisters itself during execution,
we were continuing the loop without updating the timer_rc.
This would result in spdk_thread_poll() indicating that
the poll execution was idle rather than busy.
Note that the DEBUG print would have still been OK where it
was, since the poller variable itself was valid, even though
it had been freed. But it looked a bit awkward there, so I
moved it right after we capture timer_rc.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0673261ecea0e49db97b008a83b60a35f995f83d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Create a local variable for the spdk_bdev_channel
pointer. This will be used again later in this patch
series.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71bef863c422e60294b5249bf65f62d4939d1a53
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_map_bar_rte did not return error in case bar was not mapped successfully
Signed-off-by: Lukasz Radomski <lukasz.radomski@intel.com>
Change-Id: I662cc189d47c65af8f135a3ab4b27ff1785233d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To address the error message:
SPDK_ERRLOG("Unable to resubmit as many requests as we completed.\n");
Reason: The "reaped" variable is used to caculate the free slots
of rdma_reqs after calling the nvme_transport_qpair_process_completions.
And we should correctly caculate the free slots when the rdma_req is
really put.
If we caculate the slots more than we will have, we will trigger
the error print described above.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I269bdb63646eee6444d340b904882736c4cbca36
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: qun wan <qun.wan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
For now we don't provide #ifdef to users, SPDK_CACHE_LINE_SIZE is defined with 64 bytes.
Change-Id: I8ddb01a382008a3e333967650200c5aa8b93e09e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Operations to queue iSCSI tasks are in iscsi.c and conn.c and cross
references due to this separation makes us difficult to create unit
tests.
This and subsequent patches will try to disentangle cross references
by moving some functions from iscsi.c to conn.c.
This patch moves spdk_iscsi_conn_handle_queued_datain_tasks() from
iscsi.c to conn.c. For unit tests, we don't add anything new in
this patch and just create necessary simple stubs. After code
movement, new unit tests will be added.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5b8501a1ef7ea53682a3437c7eb2375aa52ee3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will move a few functions which call
iscsi_queue_task() from iscsi.c to conn.c. This patch is a
preparation to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id136b5d3bf76a9894162115dd0d57d997178c869
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move spdk_iscsi_conn_read/readv_data() down closer to the functions
which calls spdk_sock_writev().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie7ef649e8681efac48adcfb2da1f745660f71782
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move iscsi_get_pdu_length() down closer to the caller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iacbe43d39f5b23c47a65631ae8004fcfb489e2cc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
TCP_REQUEST_STATE_NEW is already set in spdk_nvmf_tcp_req_get.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia835f3763cd74ef9b504901c719d9954317f49af
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476164
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This eliminates the flushing logic, simplifying the tcp
transport.
This also happens to greatly improve performance, especially
on random read tests. The batching done in spdk_sock_writev_async seems
to be more effectively than the previous batching logic in the tcp
transport.
Change-Id: Id980ac6073e380dc75f95df3f69cb224f50fb01b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470532
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an additional queue for requests that have been sent on the network
but aren't complete yet. As of this patch, the code
is still calling writev with no flags in the POSIX layer, so it completes
synchronously. That means requests pass through this new pending list
only very briefly inside of one function.
Change-Id: Iaab6efc118a6d5fe9589199515eb3a7293db4b8e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_sock_writev_async for performing asynchronous writes to
sockets. The user of this call is responsible for allocating their own
spdk_sock_request structures to pass to this call.
spdk_sock_writev_async will not return EAGAIN and will instead leave the
requests queued until they are fully sent or aborted due to socket
error.
Change-Id: Idf3239e65d26a3024e578122c23e4fb8f95e241b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
RDMA qpair might be destroyed by defunct timer, so it can have
active recv elements in incoming_queue. This queue is cleaned
incorrectly, so recv element for the destroyed qpair still may
be presented in the queue and be processed later. That leads
to undefined behaviour.
Fixes#1086
Change-Id: Ieae186b2d2dce4ec88ab886b26165f6ef98e8d05
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477957
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
mapping length is initialized with 0 and spdk_vtophys() returns
min(*mapping_length, cur_size) or 0. So length -= mapping_length has no
effect and req will be failed when nseg reaches NVME_MAX_SGL_DESCRIPTORS
Initialize mapping_length = request length
Change-Id: I9082866b7f8055d99fa6930a78335b3b0fdf9b2b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477575
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Add an API so that the user can enable/disable the bdev IO
timeout. Also, add the bdev io timeout handling callback.
So it means to let the upper user determine how to handle
the IO timeout scenario reset the device or abort the IO.
Change-Id: I9c7138ca46c74c045b687adab59a18d6bccc4996
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469228
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function is already declared in the public header which this
function includes.
Change-Id: Iff3f85dc166b7bd4d949b9b099a6bf05dec7dec8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477868
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
