.ctrlr_connect_qpair
Previously this was assumed to be a synchronous process so the generic
layer transport code updated the state after .ctrlr_connect_qpair
returned. In preparation for making this support asynchronous mode,
shift that responsibility down into the individual transports.
While none of the transports actually do this asynchronously, insert a
busy wait in nvme_transport_ctrlr_connect_qpair to wait for the qpair to
exit from the CONNECTING state. None of the upper layer code can
actually correct handle a transport doing this asynchronously, so the
busy wait will cover that.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3c1a5c115264ffcb87e549765d891d796e0c81fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8909
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is not uncommon for delete_io_qpair to fail, for
example when a controller is hot removed. So even
if SQ or CQ deletion fails, continue with freeing
resources and report success back up the stack.
There is really nothing the application can do to
account for this failing anyways.
Upcoming patches will add additional checks to
ensure failing delete_io_qpair status never gets
propagated to the caller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iac007c1eba30f7a8c4936b3ffb6c837f28ee12ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8658
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And for some internal functions we need to pass controller
parameter so that we can do vtophys based on transport type.
Change-Id: I3ca4fa162ec9305f62b295ba21f7474c21edfe52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8031
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The inline function can also be used in the coming submit request
function.
Change-Id: If4a5511001e6586dbce0978298beddc537f54d8b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The PCIE and VFIOUSER both can use this function, the only difference
is VFIOUSER should use IOVA=VA to do the vtophys translation, so
here we will move the function to the common PCIe layer as the first
step.
Change-Id: I699edb67a00a2fa534072fc02ac2dd4a27aba8f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8030
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The shadow registers need to be zero when the qpair is
created. This happens automatically when a given qid
is used for the first time, since the page is allocated
with zmalloc. But if a qid is reused, we need to make
sure its shadow registers are cleared *before* we create
the qpair again with the same qid.
So clear the registers in nvme_pcie_ctrlr_delete_io_qpair,
just after the cq is deleted.
Fixes issue #1795.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c30d1ea248559a01b802cd132dd57199b491b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The data path for PCIe and vfio-user transports are almost
same too, so move the code from nvme_pcie.c to nvme_pcie_common.c,
so that these APIs can be reused by vfio_user.
No logic change for this patch.
Change-Id: I82f480bba3bae0ce35e2a98f29839081095f7d50
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Libvfio-user assumes the memory translation is IOVA=VA mode,
since SPDK CI is running inside a VM, the memory mode is
IOVA=PA mode, so when testing NVMe vfio-user transport inside
a VM spdk_vtophys doesn't work with libvfio-user, so here
we add a function to return memory address based on TRTYPE.
Change-Id: I11d1c87197f7bbfc243b6bf368795c9a74bd1303
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5958
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are some common data structures and APIs in pcie transport
which can be used both for pcie and vfio-user transport, so move
the common code into a new header and source file.
No actual logic change just the code movement except remove the
static function declarations.
Change-Id: Ie9021e703a5780fdd6840f0e3cfea76a0017a811
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5923
Community-CI: Broadcom CI
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
