Discovered in bdev compression test. Vol load was using the index
of the logical map to set the allocated chunk map bits as well as
retrieve the chunk. Exposed with overwrite situations. Also clarrified
one var name that I missed in previous patch.
Also added UT that fails without the fix, passes with the fix.
Change-Id: I776a5af9364cc3d4e8b7dafec22acf23bd463630
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changed a few cases where var name chunk was used where a better
name would be logical_map_index to avoid confusion with 'chunk'
used as a data pointer.
Change-Id: Ib82a783725cad4609c31bfa8997debb3e71e75b9
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This practically reverts commit 2fe7aa5e4 [1].
The extra rte_bus was supposed to allow running SPDK
as a non-priviledged user by enabling RTE_IOVA_VA mode.
DPDK uses RTE_IOVA_PA by default - which means there are
physical addresses used as memseg IOVAs and hence the
root access is required to retrieve those physical
addresses. This patch was supposed to be paired with
a different DPDK patch of mine, but DPDK rejected that
one. Instead, in DPDK 18.11+ the user can force iova mode
by specifying --iova-mode=<mode> command line option,
where <mode> is either pa or va.
Either way, apparently there are cases where physical
address contiguity is required even without UIO (#707)
so let's revert this patch and consistently stick with
RTE_IOVA_PA.
SPDK requires some more effort to support running as
a non-priviledged user anyway.
Fixes#707
[1] env_dpdk/vtophys: register a fake rte_bus supporting RTE_IOVA_VA
Change-Id: I90bf097fd6a7f129444229dc7cf07a462d4f2d09
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Windows Virtio drivers use indirect descriptors without
negotiating their feature flag, which is explicitly
forbidden by the Virtio 1.0 spec. "(2.4.5.3.1 Driver
Requirements: Indirect Descriptors) The driver MUST NOT
set the VIRTQ_DESC_F_INDIRECT flag unless the
VIRTIO_F_INDIRECT_DESC feature was negotiated.".
Violating this rule doesn't cause any issues for SPDK
vhost, but triggers an assert, so we can only run Windows
VMs with non-debug SPDK builds.
This patch removes the assert and allows Windows VMs
to be run with debug versions of SPDK vhost.
Fixes#650
Change-Id: I95f534c33c384a4e1126a8c343c21eb63ec7bcef
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Introduce EMPTY, PRESENT and REMOVED states for Vhost SCSI targets. This
does not introduce any functional changes but opens a way to stop using
both removed flag and spdk_scsi_dev pointer as indicator if device is
removed or not.
Change-Id: Iecd76ffe9e8121cc1359b1e268eb21679d13598e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rte_vhost has rejected a patch with this feature, so
we implement it using the external rte_vhost msg handling
hooks directly in SPDK.
Change-Id: Ib072fc19b921fe0fa01c7f4892e60430232e3a1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the vdev initialization happen before calling
any vdev related functions. This is mostly needed
for an upcomming patch where additional step is
required after initializing the vdev and before
starting rte vhost.
On the other hand, this patch also fixes a technically
possible scenario where rte vhost starts processing
vhost-user messages and calling our ops before the
related vdev was initialized.
Change-Id: I8fbc7e7bc0b364327cfcec60faa74d4f64d6fad8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_vhost requires all queues to be fully initialized
in order to start I/O processing. This behavior is not
compliant with the vhost-user specification and doesn't
work with QEMU 2.12+, which will only initialize 1 I/O
queue for the SeaBIOS boot. Theoretically, we should
start polling each virtqueue individually after
receiving its SET_VRING_KICK message, but rte_vhost is
not designed to poll individual queues. So we use
a workaround to detect when a vhost session could be
potentially at that SeaBIOS stage and we mark it to
start polling as soon as its first virtqueue gets
initialized. This doesn't hurt any non-QEMU vhost slaves
and allows QEMU 2.12+ to boot correctly. SET_FEATURES
could be sent at any time, but QEMU will send it at
least once on SeaBIOS initialization - whenever
powered-up or rebooted.
Vhost sessions are still mostly started/stopped from
within rte_vhost callbacks, but now there's additional
concept of "forced" polling, in which SPDK starts
sessions manually, while rte_vhost still thinks the
sessions are stopped. This can potentially lead to cases
where a session is "started" twice, or gets destroyed
while it's still being polled (by force). Those cases
also need to be handled within this patch.
Change-Id: I70636d63e27914906ddece59cec34f1dd37ec5cd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Array channels in the subsystem's poll group are indexed by
nsid - 1, so rename the previous num_channels to num_ms
makes more sense. Also embed the channels into a namespace
data structure here, and this can be reused in the following
patch.
Change-Id: If5d9aab4b1d5bcf7a3c22f29fa58d84752f0d4cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This unifies the clean up path between SRQ and normal
operation.
Change-Id: I396d7e3749579f27b5bb1e89b9d6761a77ba5beb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446979
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Depending on whether SRQ is enabled, resources may be allocated
to the rqpair or to the rpoller. Create a struct to hold these
pointers that can be used in both locations to avoid duplicated
code.
Change-Id: I2c8fc59009201d9e41721e6462a81732b529a9e0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Eugene Kochetov <evgeniik@mellanox.com>
This wasn't used anywhere.
Change-Id: I405af3c808be284d19218f3f04c1e90e33e31de8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch adds support for many-to-one configuration
for OCF bdev. Meaning that one cache instance can
be used to cache multiple core devices.
Without this change, it is not possible
to attach core device to existing cache instance.
Change-Id: Idfce023c08b6d41490d590a8abb51f626252cd4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
FTL should pass IO errors to upper layer only in
completion callback to be consistent on sync and
async error paths.
Change-Id: I29c81af477b476c1e10b7933126737a222553ffa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch allows to process more then one I/O
completion per reactor iteration.
Change-Id: Ib58013cd96c2b7fe378f175b34d58c6d1d219dcd
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447175
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_iscsi_conn_read_data was changed to use sock_readv
instead of sock_recv as a refactoring effort.
However this change caused about 3% performance degradation
for write I/O.
Hence this patch changes spdk_iscsi_conn_read_data to use
sock_recv and changes spdk_iscsi_conn_readv_data to call
spdk_iscsi_conn_read_data if iovcnt is 1.
Change-Id: I5fcad03ff23dee4e9954eee879225d3c493be52e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_iscsi_get_dif_ctx() didn't work correctly for Data In PDU
because we had to get iSCSI task from PDU directly for Data In PDU,
and lun_id was not copied in spdk_iscsi_task_get().
This patch fixes these bugs and the DIF strip feature was verified
after applying this patch.
Change-Id: I74d404b82c4a9502a9a8e166748f817d3c2e4368
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447884
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Users may want to connect specified controller at running time,
so this API will connect to the controller and return probe context
to users, users must call spdk_nvme_probe_poll_async() to initialize
the controller to the READY state before using it.
Change-Id: I232886b000454ee826ea73c4e1043d0d18ee0ec6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those targets use the same directories for temporary
files and at the moment they race with each other. We're
seeing intermittent failures on CI:
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_list.c
rm: missing operand
```
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_device.h
INSTALL [...]/ocf/env/src/ocf/utils/utils_io.c
rm: cannot remove [...]/ocf/env/src/ocf/utils': Directory not empty
```
Fixes#709
Change-Id: I9bf6ee7a97144afafbb643a0e350f38abe79270f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447750
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The purpose is to use the single readv to read both
the payload the digest(if there is a possible one).
And this patch will be prepared to support the
multiple SGL in NVMe tcp transport later.
Change-Id: Ia30a5e0080b041a65461d2be13db4e0592a70305
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
VHOST_USER_SET_VRING_CALL invalidates the previous
file descriptor that SPDK may be using on a different
thread. The new descriptor is stored inside rte_vhost
internals and is queryable with rte_vhost APIs, but
those APIs are too expensive to be called every tick
or every time we need to use that fd. Hence, we will
now stop the entire vhost session before processing
SET_VRING_CALL msg and restart it right after. SPDK
will query the most recent call descriptor on session
start.
We do not necessarily have to stop the device - just
letting the session know that its callfd has changed
would be enough. That's an area for future optimization.
Change-Id: Idccf56fccd21ad0d3c2307eefee7bf35e350fec6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 19.05+ gives us an ability to pre or post-process
any single vhost-user message. The user can either perform
additional actions upon some generic events, or can
implement handling for brand new message types that
rte_vhost doesn't even know about.
In order to smoothly switch to the upstream rte_vhost
and drop our internal copy, we introduce an SPDK wrapper
function to register SPDK-specific message handlers. For
DPDK 19.05+ this will use the new rte_vhost API to
register those message handlers, and for older DPDKs
this function simply won't do anything - as w assume the
internal rte_copy already contains all the necessary
changes and does not need any "external" hooks.
For now we use the message handlers to stop the vhost
device and wait for any pending DMA ops before letting
rte_vhost to process the SET_MEM_TABLE message and unmap
the current shared memory.
Change-Id: Ic0fefa9174254627cb3fc0ed30ab1e54be4dd654
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Our internal rte_vhost lib requires SET_VRING_ADDR to
flush a pending SET_MEM_TABLE. On the other hand, the
upstream rte_vhost will invalidate the entire queue
upon receiving SET_VRING_ADDR message, so we mustn't
send it at runtime. Both behaviors are strictly
implementation specific, but this message isn't needed
by the spec, so send it only if vhost was compiled
with our internal lib.
Change-Id: I200b99a1dd5124bdebd104e69ae1b012a974ab6f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those will be reused by the vhost target and
its message handling hooks.
Change-Id: If41118e3700f3b445312bb691c493bd13134546b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446084
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make struct vhost_user_msg match the format defined in
the vhost-user spec. The custom additions were inhereted
from DPDK, but SPDK never made use of them. Also replace
direct sizeof(*msg) usages with a handy macro that was
already there. Finally add a VHOST_USER prefix to the
VHOST_MEMORY_MAX_NREGIONS #define.
Change-Id: Idef60fdc62a9e96f076059d60aad796fcc9d3e1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's disabled by default, so no functionality is changed yet.
The intention is to use the upstream rte_vhost from DPDK,
which - starting from DPDK 19.05 - is finally capable of
running with storage device backends.
SPDK still requires a lot of changes in order to support
that upstream version, but the most fundamental change is
dropping vhost-nvme support. It'll remain usable only with
the internal rte_vhost copy and with the upstream rte_vhost
it simply won't be compiled. This allows us at least to
compile with that upstream rte_vhost, where we can pursue
adding the full integration.
Change-Id: Ic8bc5497c4d77bfef77c57f3d5a1f8681ffb6d1f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Generate and insert DIF for write I/O by stream fashion in
spdk_iscsi_read_pdu().
Verify DIF for read I/O in spdk_iscsi_conn_write_pdu().
Verification can be done in spdk_iscsi_build_iovs(), but how many
writes to socket is not known beforehand, and same range may be
verified multiple times. So verify DIF before starting to write to
socket.
Change-Id: I860637758164b7d518c38fe92356562cbbe3d8f8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add an new API spdk_dif_generate_stream() to insert DIF into
the metadata space of newly read data block by stream fashion.
This API is tested by replacing the previous DIF generation such
that DIF is generated once all data was read.
Change-Id: I757b4e6f10fe2d9d643f56ebb678c731cdad63bb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This patch leaves metadata space in data buffer for read or write I/O
to generate and verify DIF.
For write I/O,
- in spdk_iscsi_read_pdu(), leave metadata space for every block
by calling spdk_dif_set_md_interleave_iovs() and then
spdk_iscsi_conn_readv_data(), and remember this in PDU.
- in spdk_iscsi_op_scsi() and spdk_iscsi_op_data(), set not data
length but buffer length to length of an iovec. The reason is
that the actual data length sent to SCSI layer will be larger
than the data length set in PDU. SCSI task holds data length
as an independent member and this change doesn't loose any
information.
For read I/O, in spdk_iscsi_build_iovs(), leave metadata space for
every block by calling spdk_dif_set_md_interleave_iovs().
The reason why DIF context is saved in PDU is that DIF verification
will be done in spdk_iscsi_conn_write_pdu() and DIF context will be
used there first.
Change-Id: Iac5739211f26a91b00a4ecf2f306bbecec3d78dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of write (data out) buffers and immediate
data buffers in the iSCSI library to store DIF. Increase is the
amount necessary to store 16 byte metadata block to the block
formatted iwth 512 + 16. 512 + 16 is the current maximum ratio
of metadata per block.
Use the macro SPDK_BDEV_BUF_SIZE_WITH_MD defined in
include/spdk/bdev.h for this purpose.
Besides, change the name of a helper function from
spdk_get_immediate_data_buffer_size() to
spdk_get_max_immediate_data_size() to differentiate the maximum
data size and the buffer size, and then to use the macro.
Change-Id: I626f8045ff706e1a6d79fa298261769bc96b7d8b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of small and large buffers in the bdev layer
to store DIF. Increase is the amount necessary to store 16 byte
metadata to the block formatted with 512 + 16. 512 + 16 is the
current maximum ratio of metadata per block.
This change will be done in the iSCSI library in the next patch
and other libraries may be done later.
Hence add and use an new macro SPDK_BDEV_BUF_SIZE_WITH_MD(x) for
convenience.
Change-Id: I4b5498f56c9baf3e3ed93dd1c757998d7ce65141
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new queue API to manage OCF queues dynamically
This change allows for dynamic creation and deletion of queues
on get_ and put_ io channel.
Qeueues no longer depend on number of cores in SPDK.
Queue-to-pollers mapping list is removed as well
as locks "q_ocf_lock" and "vbdev->_lock" as they became redundant
Change-Id: I5069e1f8535f505816184a333db876afb925ac44
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
According to the implementation of VPP, the vppcom_session_write() may
cannot write all provided buffer, and we shouldn't continue in this
case, just like usage of vppcom_session_read().
Change-Id: I419efc2812e3aa261a75ddbd3f7cfec60a5376d3
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one pd per device anywas, and this is necessary for
shared receive queue support.
Change-Id: I86668d5b7256277fe50836863408af2215b5adf9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregister calls are not guarded. Fix this by chekcing status before
doing unregister.
Change-Id: I593e27efdae17f6d89362fd8e4edccf2af2b7281
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445894
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Retry mechanism will stuck if there is no outstanding
IO after completion with ENOMEM. This should never
happen.
Change-Id: I58ebf8cc8a498231beef43ac20f58eeaad89afda
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The calling of spdk_bdev_finish is in wrong place,
the bdev subsystem recycling will be called by
_spdk_subsystem_fini_next. If we call spdk_bdev_finish
here, it will be called twice, so it is unnecessary.
And this patch will be used to address the issue
reported in:
https://review.gerrithub.io/#/c/spdk/spdk/+/447613/
Change-Id: I03dff8b84bd0d7b49675ce8300b3da623963e140
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447731
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was a result of a merge conflict with the recent 1fc4165 merge
which modified the ISA-L includes. We now need to use isa-l/include/x.h
format when including ISA-L files.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa38db396152d2aa4279a0dade7d47a5b9a2ba60
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447493
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both Mellanox and Soft-RoCE NICs work with this approach.
Change-Id: I7b05e54037761c4d5e58484e1c55934c47ac1ab9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Persist through power loss feature is not supported for now.
Change-Id: Id2a5088389dc28b9d28d88c04ff819d20ea11902
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For number of registered controllers field in Reservation
Status Data Structure, we caculate all the controllers
in the subsystem which Host Identifier are same with
existing registrants.
Change-Id: Ib4de22c7020dbd8294f448f23c0c5c8c142629dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The possible issue could be following if you shutdown NVMe-oF target
with TCP transport as an example,
=================================================================
==61022==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 560 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4c6216 in spdk_nvmf_tcp_listen /home/ziyeyang/spdk/lib/nvmf/tcp.c:680
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4a77b8 in spdk_posix_sock_create /home/ziyeyang/spdk/lib/sock/posix/posix.c:291
After checking the issue, it seems that we did not call
spdk_nvmf_transport_stop_listen when removing the subsystem listener.
And this patch can solve this issue.
Change-Id: Ic75d99cb0c6a3ba1c47ac79a2d8e3887b0f6b012
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447020
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch extends existing ISA-L support for NVMe/SCSI T10 CRC-16
protection check (PI). The choice of which algorithm to use is set
via an existing configure parameter. The default for x86 systems with
appropriate CPU instructions is to us ISA-L.
Testing shows that PI checking/generation will run at device speed using
ISA-L. The table-based algorithm is much faster than the original algorithm
and is provided to speed up calculations on non-x86 systems.
This patch also fixes one issue in a false configure error if nasm
is at a higher version than currently checked (i.e. 2.13.03)
Local performance testing yeilds these results:
Original - 15 mbit/sec. (code removed)
Table - 400 mbit/sec. (27 times faster than original)
ISA-L - 3,400 mbit/sec. (227 times faster than original)
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Idc7f1d97252644d839621ffe9fa995edd922da52
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Functions moved in this patch may be used in future by
other NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I975b61b7f78855e67d65ab7d9fd9f5dd859ac570
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Renaming functions to make it clear they are not part
of the public API.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9a283143a11090032b74684611403637bc6605a3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The reservation holder may release the reservation on
a namespace, release notification feature is supported
in comming patches.
Change-Id: If5d3158e691fcc782f7cf0b67a326bf62edf0531
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For API spdk_nvme_connect(), users can only use NULL or
struct spdk_nvme_ctrlr_opts for their own driver options,
so parameter opts_size doesn't take effect here. Since
some applications outside SPDK's git repository are using
such API, so we only remove the internal data structure
for now.
Change-Id: Ia727d2950d56abba637214ad17ecfa3eeab71d38
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445656
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Free the probe context after the controllers in the probe
context list become READY. Then users don't need to free
the context which is allocated by SPDK driver.
Change-Id: I2dcb76bacf26a401b5b559c4326764a4ddb97e83
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This isn't required anymore because spdk_subsystem_init
is now always called after an event has been executed, so it
always runs after the framework has initialized.
Change-Id: I05e1a4dd605f27247b6d43f5234173e07d9b9dd2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just use a function pointer and a context.
Change-Id: I2d41ed2572d892f3328aadf7f22d8696816bf4d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the boot strap event exists, this is not
necessary.
Change-Id: I277179fbc15ebe140fd22be1b67847cf23c6153e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It just takes a function pointer and a context instead.
Change-Id: Id8cdc968ddbc3776f60ad73e9aa09983ca03fa3f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ths patch adds an API spdk_iscsi_get_dif_ctx().
When opcode of BHS is SCSI command, spdk_iscsi_get_dif_ctx() extracts
CDB and LUN ID from BHS. When opcode of BHS is Data Out or Data In,
spdk_iscsi_get_dif_ctx() extracts TTT and get R2T task corresponding
to TTT, and gets CDB and LUN ID from the task.
Then spdk_iscsi_get_dif_ctx() gets LUN by using LUN ID and calls
spdk_scsi_lun_get_dif_ctx().
Additionally spdk_iscsi_get_dif_ctx() checks the state of the connection
and the type of the session is valid before starting decode operation
because contents of PDU is not reliable when the state of the connection
is invalid. The necessity of the check was found by the Calsoft test tool.
Checks and test cases are not matched yet but copying existing checks
from spdk_iscsi_conn_execute, spdk_iscsi_op_scsi, and spdk_iscsi_op_data
will be enough. The check added for Data Out is not necessary for Data In
but it will not be harmful for Data In.
Change-Id: Iba09e0ac3e760aa1c5b582a120596c49b9e9d51e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will store larger data in the data buffer than
iSCSI Initiator transfers, and size of metadata is not known until
asking to SCSI layer. This addition will be used to avoid overflow
in them.
Change-Id: I43e15d0cfbfddcf01342325b134d90e3d7dae038
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds spdk_iscsi_conn_readv_data() to read PDU data
from network socket by using spdk_sock_readv().
Additionally, this patch changes the existing spdk_iscsi_conn_read_data()
to call spdk_iscsi_conn_readv_data() by creating a single struct
iovec.
Change-Id: Ied487bb71bd4261ad53c9f3744ae272e65f98d7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_sock_readv(sock, iov, iovcnt) to the sock
library. This will be used in SPDK iSCSI target first.
Implementation was done based on vcom_socket_readv in VPP.
Change-Id: I88a8f2af4856b1035165b78d76b4a4f4587b265d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is already done for JSON info dump. In addition, the
spdk_vhost_scsi_dev_get_tgt function might implement additional logic to
no return SCSI targets under removal process.
Change-Id: I21d6f660926091dfd34da553705116926f27b30d
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a check if the number of blocks of read I/O is not larger
than allowed. This is a preparation to the subsequent patches that
support DIF in NULL bdev.
Change-Id: I82d4c835788d2f347fd5fdef82e1def313dd49a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_dif_set_md_interleave_iovs().
This function is used to leave a space for metadata for each block
when the network socket reads data, or to make the network socket
ignore a space for metadata for each block when the network socket
writes data. This function removes the necessity of data copy in
the SPDK application during DIF insertion and strip.
Change-Id: I018efd77bdadcaec4679eea4dc1e404f155b0879
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI target will need to get data block size except for metadata.
Other SPDK application may need to get the same information
future. Hence this patch adds an new API spdk_bdev_get_data_block_size
to bdev layer. In the header file, spdk_bdev_get_data_block_size
is located next to spdk_bdev_is_md_interleaved to avoid confusion
by new users.
Change-Id: I0fd2a6d0bcf6a4c18c583f70d96cc5035fc57fe9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unregistering by a host may cause a reservation held by the host
to be released. If a host is the last remaining reservation holder
or is the only reservation holder, then the reservation is released
when the host unregisters. This may occur with Acquire/preempt
and Register/unregister commands.
Change-Id: If59fe2fdaa69c8ad70f364618d6c281494ad6245
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A registrant can obtain a reservation on a namespace by executing
acquire command. Acquire command is associated with specific namespace.
For now only Acquire and Preempt reservation acquire action is
supported, Preempt And Abort will be supported in future.
Change-Id: Ifcbb6b414827393ffc266ceada5982b743716321
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reservations can be used by two or more hosts to coordinate
acccess to a shared namespace, host must register to a namespace
prior to establishing a reservation. Unregistering by a host
may cause a reservation release, this feature will be supported
after reservation acquire patch.
Change-Id: Id44aa1f82f30d9ecc5999a2a9a7c20b2af77774a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Borrow the ideas from iSCSI and optimize
the nvme_tcp_build_iovecs function.
Change-Id: I19b165b5f6dc34b4bf655157170dec5c2ce3e19a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446836
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New API added for upper level to get controllers'
supported flags.
Change-Id: I51e9d0e57c355fa37f092602a94f4c08deb8898c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Take a callback and an argument instead.
Change-Id: I9edda1a9bd506e12f309e52e520e97c0d705d6a2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Now that there is always one event to bootstrap,
we don't need an event here.
Change-Id: Ic87501461a608f5b15745a50b6e15f0f28aa55c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These can now be delayed. Next they'll be converted to thread
operations instead of events.
Change-Id: Id8c183621fb88594a9fd508eff064b4a1557a5b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- locks moved from ocf to adapter code,
- 'data object' renamed to 'volume',
- context and volume API reorganized.
Change-Id: Id4670ddfcb8eda9aefabc273497498c5bd3db1d5
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444092
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Robert Bałdyga <r.baldyga@hackerion.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will make it easier to convert these operations to
spdk_thread_send_msg.
Change-Id: I4c975c22f3967a7197e69ccd230a14bdb97ba332
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The rest of the stuff is going to be converted to using threads,
but there must be one event at the beginning of time for
now.
Change-Id: Id4689d73e006ccf7bbe001732798e0ae78c603ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446987
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help keep the definition of that function fresh as things
change around it over time.
Change-Id: Id30864df132459a0ff889a725aa70abe072f3087
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Since the fuzz tester will be submitting random commands with random
memory addresses and such to the NVMe drives, we want to be especially
sure that we are using the IOMMU while running this test to prevent
memory corruption in the event that an errant command triggers a bad
DMA.
This function exposes to the application whether or not we are using the
IOMMU.
Change-Id: Ie4d26c706967a520967bfc81f72f7b581b792437
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not all RDMA drivers fail back the dummy recv and send operations that
we send to them when destroying a qpair. We still need to free the
resources from these qpairs to avoid eating up all of the system memory
after multiple connect and disconnect events. Since we won't be getting
any more completions, the best heuristic we can use is waiting a long
time and then freeing the resources.
qpair_fini is only called from the proper polling thread so we can safely
call process_pending to flush the qpair before closing it out.
Change-Id: I61e6931d7316d1e78bad26657bb671aa451e29f4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_nvme_lookup_ctrlr can be replaced with existing
nvme_bdev_ctrlr_get_by_name function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id85243b13099b2976e1368e481201ccf27ce6ddb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will make possible to make some NVMe bdev related
functionalities to be common for NVMe and FTL bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafc2acc3ac54deb762bc7205180f41d5befbb42b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443552
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdev NVMe controller will be used in future by other
NVMe based bdevs, so let's move it to common layer.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic485b556d622011b9e36fec1ce13394fc436bbd8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme_ctrlr structre will be moved to common files in next
patch, so let's change its name to more representative.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id51c19437c2d4ba479407201b062266807156c0b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For now these are empty files, but there will be some
code in these files in following patches.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie45d6d3314c424f9af84bb3b0eba00de45215db5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a beginning of series that will provide
common code for all NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I097b4a03ef79277659f45d217c7e4e58236c98bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445893
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We specify the --match-allocations rte init parameter
now, which gives us guarantees that memory will be
freed in the same units it was allocated.
Note that if user initialized DPDK separately from
SPDK, we aren't sure if --match-allocations was
specified, so will still mark the segments to not
be freed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I599747d4b917e91adfabf64c904cd7891a77b3cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446459
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This function indicates whether DPDK was initialized
external to the SPDK env_dpdk library.
This can be used in cases where we need to implement
different behavior when DPDK is initialized outside
of SPDK - in that case certain flags that SPDK would
prefer may not have been specified. This will
be used in the next patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58d285bd4d9cda96b108624d65dedbec32164cfe
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
io_types like FLUSH and RESET are not always supported
by base bdev modules. For example: virtio_blk bdev doesn't
support FLUSH; ocf or ftl vbdev doesn't support RESET.
Change-Id: I569ea75f8242c8bf082d7d89996ad1c7b1791570
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
