Reported by clang:
rte_vhost_compat.c:114:36: error: taking address
of packed member 'payload' of class or structure
'vhost_user_msg' may result in an unaligned
pointer value.
To fix it, just remove the extra unaligned pointer
and inline all its accesses.
Change-Id: I7e4ab536b87ab02a4ea12c55d55a6e495c3091ca
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In several error cases, the status_class and status_detail
is not properly set.
Change-Id: Ie9cf8ec13b971d7295862872e8c7e834d08e7f14
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We shoud not always return SPDK_ISCSI_CONNECTION_FATAL
in spdk_iscsi_read_pdu function.
Reason: In iscsi_conn_handle_incoming_pdus, the loop
directly return only rc==SPDK_ISCSI_CONNECTION_FATAL.
But it masks all the necessary information. So we would like
to keep some information of the return value for spdk_iscsi_read_pdu,
and we can use error log to track those information.
Then we can return SPDK_ISCSI_CONNECTION_FATAL as the error
return value for iscsi_conn_handle_incoming_pdus function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I4c40fcb27052b55cb92e06273701a881def18e12
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457078
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
_spdk_bdev_io_split() will be used to requests that have IO buffers.
Change-Id: I5ba0b83e47b84066e6c5032de2e02404155896d3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
struct ether_addr was renamed to struct rte_ether_addr
in latest DPDK master, but our internal fork of rte_vhost
still used the old name, which can be now a non-defined type.
Together with the struct, the RTE_ETHER_ADDR_LEN define
was renamed as well, so we'll now check if it's defined and
we'll manually define struct ether_addr to keep the old
rte_vhost working.
Change-Id: I78b8104ed3bfe03397881a94f0f8bee14f9efae8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In lib/ftl PAGE_SIZE is used in many places. But I think there's no relation with
the host memory PAGE_SIZE.
In most changes, PAGE_SIZE is replaced by FTL_BLOCK_SIZE for ftl block size.
In ftl/ftl-anm.c, PAGE_SIZE is replaced by 4096 for alignment.
Change-Id: I72e7c65c83b9fe1a4e50944dc5d90b9459b4e593
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Unsetting this flag will decrease the number of WRs retrieved during CQ polling and will decrease
the oeverall processing time. Since RDMA_WRITE operations are always paired with RDMA_SEND (response),
it is possible to track the number of outstanding WRs relying on the completed response WR.
Completed WRs of type RDMA_WR_TYPE_DATA are now always RDMA_READ operations.
The patch shows %2 better peformance for read operations on x86 machine. The performance was measured using perf with the following parameters:
-q 16 -o 4096 -w read -t 300 -c 2
with nvme null device, each measurement was done 4 times
avg IOPS (with patch): 865861.71
avg IOPS (master): 847958.77
avg latency (with patch): 18.46 [us]
avg latency (master): 18.85 [us]
Change-Id: Ifd3329fbd0e45dd5f27213b36b9444308660fc8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456469
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Vhost-scsi target will not set task's initiator port parameter,
so reservation commands sent from Guest will cause segment fault.
Change-Id: Ifc175effded5371eca08d5bfe7e4aa977dd4b1c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added basic configuration details (transport type and address,
parallel units, cache info) as well as most important OCSSD geometry
data to get_bdevs driver_specific section.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I00c50706bd9203bcef1701be1b7d87e93c10e57f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456790
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Read requested range of lba map during relocation
instead whole lba map.
To read partial lba map range single move now has
three states: read, read_lba_map and write.
Free queue and write queue were merged to a single
move queue.
Change-Id: I86839f2286d42d4debf87cea40091370e5283b15
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454747
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep track of read lba map segments to avoid
unnecessary traffic in case ANM events.
Lba map is divided on 4KB segments which can
store 512 lba entries.
In case multipe read request on same segment
keep pending request list and process it in
read_lba_map() completion callback.
Change-Id: I2661bdb716ab7c975140e0b37aebcb17aa23901d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_vmd_init() will attach all VMD devices that were
unbinded from system. There is not need to specify VMD
bdf in VMD public interface since it can be controlled
by setup.sh script.
Change-Id: Ifc45c32dc7e11b59429a41ddfdd596db30e27731
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456631
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rte_vhost_vring_call() from upstream DPDK can read some
unitialized memory and crash if it's called on invalid
queue ids. The implementation in our internal rte_vhost
fork ends up wiritng to a random descriptor number, which
doesn't cause any crashes but is a bug nevertheless.
To fix it, just check if the queue is initialized before
interrupting it during the session start. It's not a hot
I/O path and there's no performance impact.
Change-Id: I830c1be98ef00d4ece9a6bd88cf79b9dfe29d2a9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457247
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We had "./configure --with-uring" , but actually, it wasn't compiled.
we need add uring to Makefile that code will add this.
then we can continue to verify this module.
Change-Id: I8b98825f6795eb9f9e7b4947d1c7c3a44a6f0f64
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously the connection was scheduled to another core just
after setting conn->full_feature to 1, but conn->state was still
ISCSI_CONN_STATE_INVALID. The connection started to run on another
core but could not run normally until conn->state became
ISCSI_CONN_STATE_RUNNING. conn->state was changed late to
ISCSI_CONN_STATE_RUNNING after sending the first login reponse.
This gap window had caused intermittent critical failures.
Based on this analysis, this patch changes to call
spdk_iscsi_conn_schedule() just after sending the final login response.
Whether any login response is final or not can be known by checking
conn->full_feature is not zero.
Fixes#785
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ea55fef27e2f332fcd789d32daf479a24c0588d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Actually write/writev/write_zeroes/unmap are never be called, and we add
the error code here to keep it same style with snapshot bs_bdev.
Change-Id: I32ad051c1902bd7080b894e36f7c89f1c8d27434
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Gives the ability to change behavior of restore after dirty shutdown
without recompiling ftl library. User can define if partial recovery
or error should be returned after such a scenario.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I6dda40df7b92d6a377957e4a70a3eab91a6ac4a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
If a band wasn't closed during shutdown (ie. after dirty shutdown),
the start md contains valid data, however end md does not (or it may
not be written at all).
The config gives the user the ability to specify if encountering
this case should result in an error, or if ftl should pad the band
with data and recover from closed bands only.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If02f7ca8bc90bb61698fb710fee2274af6af01e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455513
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an open band is found during recovery (after dirty shutdown)
ftl will attempt to pad it, instead of returning a recovery error.
Any previously written data on that band is lost, as the line is
treated as being in free state after the pad.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ie48fa9fa37a3853f41921b9417c69301cf47e673
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The patch also changes, so the command calculates the needed
chunk offset based on PPA, instead of relying on the user to
provide one.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ic4eec1b86ded4eb71de860015403294ed0c8c266
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Direct wptr allows for writing to band with externally
provided PPA, rather than one assigned by the wptr. This
can be useful when padding open bands during recovery or
bdev creation, as ftl can find partially written end meta
with no way to close the band with valid data, that would
conform to an already written CRC value.
This does mean that I/O sender is responsible for calculating
and obeying per-chunk write pointer arithmetics.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ifcbc4e8ffb69c829469a571bed8e27b148d7a651
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455511
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Almost all I/O callbacks in ftl utilize data in ftl_io, which is
initialized as callback argument in ftl_io_init_internal. This patch
changes the behavior to always returning the ftl_io struct in addition
to an extra opaque buffer.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I611ab1b33575f599798a2bb65c231a724c852c7f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455831
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve handling of partial IOs for case when iovcnt == 1.
This case is pretty frqeuent because all data allocated by OCF
have iovcnt == 1 (see ctx->data->alloc() or vbdev_ocf_ctx_data_alloc())
Change-Id: I8d38ca9e9d2bd3e6ce298bf788ce6ed782b56594
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes submission of partial IOs in bottom adapter
Existing check (if offset > 0) was not sufficient to detect partial IOs
because there could be an IO with offset = 0 but length < total size of iovs.
This patch changes the check, but also free operation on completion
because now the old free does not cover all situations when we allocate iovs.
`Partial IOs` are the IOs handled by bottom adapter
which specify only part of the internal iovs vector.
So their length is less that the length of internal iovs vector.
They exist because sometimes parts of single IO from top adapter
need to be sent to different locations.
Also, in general, IOs initiated by OCF (such as cleaner IOs) are represented
as single big iov that is submitted by parts in form of 'Partial IOs'.
Change-Id: I8ae47659fb34904c593a696d74d683a418ac9962
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement metadata probe functionality to load cache state
from disk.
During metadata probe, we inspect UUIDs of core devices
and create vbdev configurations based on them.
Then, to start vbdev, we use load path (loadq = true).
After this change persistent metadata is officially supported,
we can save and restore cache state from persistant storage.
WriteBack mode is now safe to use in respect to unexpected shutdowns,
because all information about dirty data is also restored during cache load.
Change-Id: I6cf86aabd68177b88638a68ea6a5b78a1068a4d0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455417
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates submodule and appropriate functions.
Cleaner poller is now registered only when needed.
Change-Id: Ic4ca7ce6f77b71ac12c19462f62ae7cd96c59006
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
using data_offset and data_len is consistent with related APIs,
and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic9d216e25880f7b5ab33b764f45d332c090fa88c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In some test cases, unknown iSCSI PDU other than the login request
has been sent to the iSCSI target when the iSCSI target is not in
runnable state, and it has caused failure in iSCSI target.
To know what PDU was received by the iSCSI target, this patch changes
the iSCSI taget to collect dump of the PDU.
SPDK has already the SPDK_LOGDUMP macro but the SPDK_ERRLOGDUMP macro
will be appropriate in this use case and added. Then the SPDK_ERRLOGDUMP
is used in iSCSI library.
We can decode PDU and output any format easy to read by human, but
creating good format is not easy task and error prone. So this patch
uses simple dump.
Dump outputs like:
PDU
00000000 40 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 @...............
00000010 0b 06 00 10 ff ff ff ff 00 00 00 5a 00 00 00 03 ...........Z....
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3ed2fca7fec24ccff17b89ba749a58c397b72c13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
AIO backend requires aligned data buffers, and the maximum
IOVs supported in bdev module is defined to 32, there are
cases for Windows Guest which will send data segments more
than 32, SPDK can't process such cases, so here we can set
the 'seg_max' parameter based on bdev module capability.
Also set the maximum segment size for those requests.
Fix issue #625.
Change-Id: I0ff61e55872af17115c0b6b28425e70cb8769790
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI application may set the data iovec to NULL for READ requests.
Change-Id: Ic6b73f62f75dc2d927c18219fa1c2cb242f0528e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Keep lba map related fields in separate struct directly
in the band. Cleanup interfaces depended on ftl_md.
Lba map structure will be extended in next commit.
Change-Id: I1cfc2f2ff0c0e90bb63f39808780845673002e70
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453370
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As the name suggests, this function iterates through all elements of the
mempool invoking a callback function on each one. It's particularly
useful when deinitializing mempool that requires freeing resources tied
to each element (e.g. allocated through spdk_mempool_create_ctor).
Change-Id: I3da1fee527a36bf99f0b0e2dd3d6f9297422ff25
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Split the IO in case io->iov_cnt exceeds the FTL_IO_MAX_IOVEC. It allows
the user to pass any number of iovecs. Each IO request is now split if
necessary and submitted via ftl_io_call_foreach_child submitting each
child individually. Any resubmissions need to be handled on a child
level, as parent request doesn't track its children submission status.
Change-Id: If54249d54225b34191216a366c227f79215abc90
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As the name suggests, the function calls a function passed as the
argument for all children IOs.
Change-Id: Idd7b6013e68fdd188db6e682bb9ba9ec2e6f52f1
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Extended ftl_band_read_lba_map() interface to provide
range of lba map to read.
Added ftl_xfer_offset_from_ppa() function for
calculating offset of read portion of lba map
based on ppa address from IO. This offset is
used for coping read lba map portion to internal
ftl buffer.
Change-Id: I1c72a18c79eda8c33cd0b20ea36a5d9521a09d06
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449435
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_SUCCESS is a remnant and all other SPDK libraries have used
just 0. So this patch removes SPDK_SUCCESS from iSCSI library and
uses 0 instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie33fd26238411e994ea9ea0c898da1abb502cad6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch uses the newly added API spdk_dif_update_crc32c() when
DIF insert/strip is enabled.
Change-Id: Icf32a0ddef6cf92b0887b38495457e7fcac30987
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
