The bit arrays were used for dynamic flow control in a previous
implementation. They are no longer needed as flow control is
now static and managed solely in the idxd plug in module. Use
simple lists of descriptors and completion records instead.
This is a simpler implementation and will allow for some future
clean up of structures as well.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I8c4cce12e88ac5416e3fe29a416487759214ec9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8922
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch is used to add the kernel idxd support.
Without this patch, we can use userspace idxd driver
under accel_engine library (module/accel/idxd/accel_engine).
With this patch, we can also kernel idxd driver under the
accel_engine library.
Our approach is implementing a wrapper library to use IDXD
device by leveraging the kernel DSA driver in SPDK idxd library
(lib/idxd).
Then users can leverage the RPC later to configure how to
use the DSA device by user space driver or kernel driver.
In this patch, our approach is to use the idxd-config library
to export the WQs (Working Queues) exported by the kernel.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3a25a4fe0327bd626bf6883dfbe54437d3209e51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Now that we've deprecated the RPCs for a release, we can remove the whole
library.
Change-Id: I0f1a357fcfb3404efac39aa021928841c2f22ff1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is no point in producing USDT probes in unit tests and it breaks
the build on some systems:
ctrlr_discovery_ut.o(.note.stapsdt+0x14): error: relocation refers to local symbol "" [102], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x90): error: relocation refers to local symbol "" [108], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0xf8): error: relocation refers to local symbol "" [110], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x15c): error: relocation refers to local symbol "" [112], which is defined in a discarded section
Fixes issue #2027.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic6dad60df1f7dccb7f99777ebc4435c618cb505a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The traces record calls to spdk_(get|put)_io_channel() and saves the
reference count of the IO channel and its context. The context, instead
of an IO channel pointer, was selected because the same pointer is often
used in other traces (e.g. nvmf's poll group), so it makes it possible
to match these traces together.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I15fe982a89685d8f6e23d406d6d48f5c2d9d604b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In order to avoid latency imbalances, the user can specify a cpu mask
on which the poll groups should run. This code update added data structures
to control set of CPU cores.
Change-Id: Iaf69d75da2fc6fed350d97d11027ce09e9432210
Signed-off-by: Yuri <yuriy.kirichok@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5610
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Loading subsystems and restoring state from a JSON config file is useful
outside of the SPDK application framework, so move it to lib/init.
Change-Id: I7dd3ceace2e7b1b28eef83c91ce6a4eedc85740e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6645
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SYS_LIBS var is used to generate Lib.private section of
spdk_syslibs.pc
lack of pthread can result in linking issue when spdk's *.pc are used
please note that usage of -lpthread and -pthread is not consisent
within system wide pc files
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2dd327371d5621ea12f1e2f7abdfe6b7aa6602eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szulik <maciej.szulik@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
zipf is a power law probability distribution. When
applied to performance testing of block devices, it
will select blocks over the full range of LBAs, but
will more frequently select lower-numbered LBAs.
The theta parameter governs the distribution - higher
values of theta will concentrate the distribution on
a smaller number of LBAs.
Note that fio supports zipf, so adding it to SPDK
will enable our perf tools (bdevperf, nvme-perf) to
provide similar functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df129c9d61996a2070188c6cd9f1fde631ac208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Look for 'vfio_user' in SPDK_LIB_FILES to determine
whether the target application actually needs to be
rebuilt.
Fixes issue #1930.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If3f699c91972e20dc4520e25c655ed11f6843be0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7826
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At least on some Ubuntu distributions, default
vfio-user install puts libs in usr/local/lib instead
of usr/local/lib64.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib312d8ca9b4ce9e858a9a9e76525fc8afd48ced5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7825
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Passing cpu_mask hints that match only single core were
usefull to prevent any accidents when doing round-robin
in case of 'static' scheduler.
In practice this is not required in case of 'static' scheduler,
the threads will be spread out over all reactors anyway.
This hinders other schedulers which try to respect the cpu_mask
hints, as they would not move the thread to any reactor.
Preventing bunching up less used threads on single reactor.
Drawback of this patch is that poll group names will not match
the cores they are on.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5fb308362dd045228ea9fcca24f988388854c054
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7028
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Fio 3.19 fails to build with Clang 11 because of
implicit-const-int-float-conversion error.
Disable -Werror checking for now.
Fixes#1848
Change-Id: I0f3922d7af412de35d9f79f3f5413af146996bf3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When building spdk on ARM platform like thunderx2 with --enable-debug,
there are following error:
/tmp/ccOBb4AF.s: Assembler messages:
/tmp/ccOBb4AF.s:45: Error: selected processor does not support `casp x0,x1,x2,x3,[x4]'
/tmp/ccOBb4AF.s:77: Error: selected processor does not support `caspa x0,x1,x2,x3,[x4]'
/tmp/ccOBb4AF.s:109: Error: selected processor does not support `caspl x0,x1,x2,x3,[x4]'
/tmp/ccOBb4AF.s:141: Error: selected processor does not support `caspal x0,x1,x2,x3,[x4]'
The reason is that DPDK is built with -march=armv8.1-a or -march=armv8.2-a+lse which
have these instructions while SPDK is built with -march=armv8-a+crc which does not support
them. Change spdk build machine to native can fix this.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I759d4ce2c557ce5ff73a802d7a4b6579c4ba64f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7025
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch really uses the accelrated engine.
Currently, we only offload the crc32c caculation,
but it can be extended.
Change-Id: If0e4c6a44b6e1e10e03f7eca355bed418d67326b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6760
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Some versions of the file (e.g. 5.33) confuse the sharedlib files with
pie-executable ones when they already have the executable bit set.
Since this particular bit is already set on the .so.* when they are
built, file may report the type as "application/x-pie-executable"
instead. As a result, lib files won't have proper permissions set
when installed.
This is a bit problematic for building the RPMs since when
find-provides kicks in to determine the dependencies, said files
are not picked up at all - package ends up with empty "provides:"
data breaking the dependency lookup during installation of other
packages which may depend on the broken one.
To mitigate, don't use mime-type, simply run file against the lib
in default mode and look for "shared object" string - this should
work for most of the file versions available on the supported
distribution.
Spotted on Fedora31.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If9974f5acbdad6eb1204b64f0ee1ac9b2e20f85b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I191ad5e3b153fb563256eba1aa695716f66db788
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6377
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some platforms require that a specific file extension is used for
executables. Append $(EXEEXT) to $(APP) definitions to accommodate
this. The name EXEEXT has been chosen for consistency with automake
which uses the same variable for the same purpose.
Add extensions for generated files used by Windows to the 'clean' target
(.obj, .lib, .pdb) and add output files to .gitignore.
Tested using a cross compiler that forces a .exe suffix and verifying
that all LINK messages include the correct suffix and that a second
call to make does nothing (showing that the targets match the
generated executables).
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ief012f6294d2f94b23c8b4f9747e21a0dfb91e96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
MinGW builds require a thin layer above the standard libraries to
provide POSIX functionality that is missing on Windows. Add support
for building this.
MinGW cross builds are experimental and work is ongoing to integrate
them into the CI and test environment. Including the changes at this
stage is being done to facilitate that process.
The layer has been arranged in the same way as DPDK and is
accessed as an external build using ./configure --with-wpdk=<dir>.
Support has also been added for using a default ./wpdk in
preparation for reaching the required level of stability.
The help text for ./configure indicates that support for --with-wpdk
is experimental.
Further details and instructions can be found at https://wpdk.github.io.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Iff0f705789f19fb193dcb3c9090c3e90613a8d9a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6589
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On Windows there has to be a thin layer above the system calls to
provide POSIX functionality. When wrapping system calls, the name needs
to be prefixed with wpdk_ to ensure that the layer is called.
Re-arrange the definitions to facilitate wrapping and prefix with wpdk_
for mingw. For other compilers targeting Windows, the --wrap flag is not
supported and the layer above the system calls implements an alternative
mechanism to enable the mocking.
Tested with $(info LDFLAGS) added to spdk.mock.unittest.mk combined with
visual inspection and running the unit tests.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: If00504740229362c40bee4ae171d35489afb2e77
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add -mstack-protector-guard=global to work around GCC bug 86832,
where -fstack-protector will attempt to use native TLS, but mingw only
supports emulated TLS. This causes a segmentation violation at the start
of any function protected by stack-protector. The issue exists in GCC
versions prior to 8.3.
Enable -mstack-protector-guard=global which uses a global variable for
the guard value. This is the behaviour with the fix, so there is no
downside to enabling it for all versions of GCC on Windows.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I85bc831043585071b0d8b0a3dd637b8d9ff26dab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Check compiler target triplet for the strings 'windows' or 'mingw'
and set OS to Windows. If found, adjust basic parameters:
Set EXEEXT to indicate executables have .exe suffix.
Exclude 'relro' and 'now' flags which are not recognised on Windows.
Exclude 'noexecstack' flag which is not recognised on Windows.
Exclude -pthread flag because Windows doesn't have POSIX threads.
Include libssp.a to support stack-protector and _FORTIFY_SOURCE.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I94a45d3123ebc81f5529006fa07b05da897e5866
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6574
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Users may not use SPDK libvfio-user submodule, so add a
library path for this case, users can still just use
'--with-vfio-user' without adding the path, for this case
a submodule default path will be used.
Change-Id: Ib0dd82ab6910056ff21b5b2d373c0d16916162c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Previously the libvfio-user didn't install the static library to
the install directory, with that fix in libvfio-user, we can use
the install directory now.
Change-Id: I3f232395a6dc3bf6d7d3937b245eb10c4b6a0e26
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
gcc -dumpmachine may provide the following output:
ppc64le-redhat-linux
To detect PowerPC system we should check for both
"powerpc%" and "ppc%" strings
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ifb5afe743797177afa4f1b541a0c8ccaf4befbda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Intel Control-flow Enforcement Technology (CET) is a
processor feature that blocks return/jump-oriented
programming (ROP) attacks.
It is currently only supported on Tiger Lake client
processors, but will be available on other processors
in the future.
CET requires toolchain support. gcc8 does support it.
For now, this will opt-in only at least until the
technology is available on server processors.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8c7f882eeeaed26484c31dc0d67d5cc42baeaa2d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5921
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Users can now generate the necessary linker args for their
own applications using something like:
PKG_CONFIG_PATH=build/lib/pkgconfig pkg-config --libs spdk_nvme
Dependencies between libraries are included in the generated
.pc files, so the user only needs to pass the top-level subsystems
or individual SPDK libraries they are using in their application.
Modules will automatically be added to the output if the associated
library is specified. For example, specifying "spdk_bdev" will include
the libraries not only for spdk_bdev, but also all of the bdev modules.
Users still need to supply the -Wl,--no-as-needed or -Wl,--whole-archive
flags. They cannot be added to the .pc files without increasing the length
of the argument string by a factor of 15x to 20x.
Modify the test/external_code/hello_world Makefile to use pkg-config to
ensure this gets tested at some level in our autotest environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie48a75f11969d5d775d514cf10bcb82d197eabfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4371
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When NVMf target linked with vfio-user library, we can use
vfio-user client library to connect to the target.
Here is the three examples that can work with target:
identify -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g
perf -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 1 -o 4096 -w read -t 10
reconnect -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 32 -o 4096 -w randrw \
-M 50 -t 10 -c 0xE
You can run the following test script test/nvmf/target/nvmf_vfio_user.sh to have a quick test,
currently enabled with NVMe Identify,Perf,Reconnect tools.
Change-Id: Ieb9842b2f372184fffbf7f23e4aad26feb47c350
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3839
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Indicate interruptable module libaries by spdk.modules.mk
through INTR_BLOCKDEV_MODULES_LIST.
Other applications can directly use INTR_BLOCKDEV_MODULES_LIST
to create themselves to be interruptable.
Change-Id: Id1894dd3753c7b404ebb9d77f3184be942f6d216
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5782
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In this patch, we will use the accel library to do the crc32 work for the
header digest when sending the pdu in the target side.
For data digest support, will consider in the further patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3169a158afd633f48bdbeb2cce1ed20e4141ae45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5472
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are cases where spdk.common.mk can get included
more than once in a Makefile. So avoid duplication
in SYS_LIBS by initializing it before appending text
to it.
The duplication was harmless but a bit annoying.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idf081f973e15a9ab6ec9211b9a3cbf02c736c7a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This avoids duplicating it in several different
Makefiles.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85f4886ec6744c23639d24867e2c68757dfeba32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4484
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
All of our Makefiles duplicate huge lists of libraries
in SPDK_LIB_LIST. We have a very precise and accurate
accounting of the library dependencies in
mk/spdk.lib_deps.mk which can be used to generate
the full list if the app specifies the modules and
subsystem libraries it wishes to link.
I did a first pass through all of the existing
Makefiles to take advantage of this new functionality.
There may be more optimizations we can make later but
don't want to hold up this patch for all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icdaf6f749a6908df2c2ce2db22631a4af4ff3a9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5553
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be done via explicit options on the
application command line instead.
This has the added benefit of removing a usage of
whitelist/blacklist which we are working to
remove from the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5739e281f1c29fc8a5d175f5bbc916cd7d926fe4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5274
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Our check_so_deps.sh test script removes the spdk.lib_deps.mk
include from spdk.lib.mk so that we can check which symbols
the libraries depend on. But modifying the code like this
is a bit kludgy. So instead add a Makefile variable that
check_so_deps.sh can set to get the same behavior.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5622f4c3adb2d5ccd5ae33cb4cd116716134a9b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
We use some implicit depdendencies in our subsystem
libraries. With at least some linkers, these
dependencies are not written into the shared library
file if there is no actual symbol dependency found.
So use --no-as-needed to ensure the dependencies
stick.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb476efb50b00ff04f5640b4e5a1362a1f096fa7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4796
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The new design:
* Supports a generic batching capability in the accel_fw layer
that keeps track of hw accelerated vs sw commands based on
the capabilities of the engine and processes sw commands in the
generic layer while sending a list of commands (not a batch)
to the engines for processing.
* Batch completions are managed via the generic layer, when using
the accel_fw the engines only process commands. With DSA however,
if a list of commands is sent down it will use the DSA public
API to create and send batches but will rely on the generic layer
to complete the batch task itself. When using DSA directly, batching
works as usual (DSA handles batch completion).
* The engine function tables were greatly simplified by replacing
all of the individual entries (copy, fill, crc32c, etc) with one
`submit_tasks` function that is used to both send lists of tasks
for batches or just one task for single shot API.
* Internally batching is now used to re-submit tasks that were queued
for flow control reasons.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I99c28751df32017c43490a90f4904bdabe79a270
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
All options -c, --config and --json are valid, but have to
point to JSON configuration file.
Adjusted UT since JSON configs don't work with --wait-for-rpc.
Since this removes last reference to legacy INI configuration,
updated conf library to no longer mention the deprecation.
All uses of conf library are for explicit reason and not
related to SPDK event framework configuration.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9a702465982daf715ce1c2ab863c48584734611
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- Removed slew of conf.h includes
- No longer require mk vars that include conf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica7e8e8bf1d4a5d0b0200bfe689aa13afd77bfaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4746
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in bdev layer.
All options through the legacy config are already reflected in JSON.
Removed configuration can be set via `bdev_set_options` and
`bdev_set_qos_limit` RPC.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24c365625540659cad425268d2aa41e3bf279d5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in ioat accel module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iebaeef4cf648874700238f6167462f4958546be2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in blobfs library.
Mostly reverting patch:
(97f3104) blobfs: Add conf parse for blobfs.
CacheBufferShift option in legacy config is not tested in CI,
and never received corresponding RPC.
If required the RPC can always be added later on.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I54e39f069047a243b2186ae5ea225ed452180488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in virtio_blk and virtio_scsi bdev modules.
Most of the options through the legacy config are already reflected in JSON.
Exception to that is "[VirtioPci] Enable" option, which worked for virtio_blk
and virtio_scsi. It then on initialization scanned virtio_pci devices for
presence of blk/scsi. There is no RPC that scans it on demand, nor was it used
in any of the tests. So this patch removes that functionality,
if needed this can be reintroduced as new RPC (or two for each backend).
Module initialization for bdev_virtio_scsi changed to be synchronous.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0978a4a084795e94993bb9122bd73ed49e14b96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in nvmf subsystem.
All options through the legacy config are already reflected in JSON.
Since the step in target initialization no longer does config
parsing, it was renamed appropriately.
There is no longer a need to delay this step via send msg,
since no callback is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5ee080bb1f5bf954f3b00545adb16e7176c35530
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
This patch removes legacy config support in vmd subsystem.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I45f66809a889b39a05bf4f6856431d922b497c76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4641
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in vhost_blk/scsi library.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia63651cdb7433267d1a8839a1739e68b436e5d08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The internal vhost library is used when DPDK's version
is older than 19.05 and the experiemntal vhost nvme
target.
For the CONFIG_INTERNAL_VHOST_LIB option, SPDK doesn't
enable this option by default over one year and CI
doesn't cover it either, so we may remove it with
this release.
As for the vhost-nvme target, since we are developing
a new vfio-user target solution, it's OK for us to remove
it now.
Change-Id: Ib2cce1db99cd09754307c2828b3187f2d4550304
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4562
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in uring bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I79f9b4458af2fdf0e4683f9cd82b64e9658c5fcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4672
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in split bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa8e546bbd6357ba93af8164e2f3d8e497fcec06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4634
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in passthru bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53ee6e78d210c155a31ae6204472e89756e43e65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4633
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in null bdev module.
All options through the legacy config are already reflected in JSON.
While here, added allocation failure check for g_null_read_buf.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I59a28a402e0c61e5636da623bc109e15b36f0584
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in malloc bdev module.
All options through the legacy config are already reflected in JSON.
Note that malloc_disk_count needs to be reset for each module initialization.
Otherwise for cases where bdev submodule is reinitialized, the count in
malloc names would grow. This should be addressed separately by making name
parameter required, rather than optional. Which is the case for most (all?)
of the other bdev modules.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ida93c74e7b0be7da19e11d5cc3fda9112824782f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4625
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in GPT bdev module.
Please note that disabling probing only for GPT partition does not
have a corresponding RPC.
Similar functionality is possible for all bdev modules at once via
`bdev_set_options --disable-auto-examine` RPC then followed by
`bdev_examine` RPC for particular bdev.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a106b3dc0953166264b11c2e95c4433163fcd3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4624
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in error bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348c19f560057b46030aa03adcca073f0906de0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4623
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch removes legacy config support in AIO module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I43655ab8d3ca787a7e92072b195f3b73fcf4fdbf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With blobfs_bdev linked into applications, targets can
work with blobfs related RPCf methods.
Fixes issue: #1547
Change-Id: Ie501cd4d8d1c87380b78b54864003f45e0c2edc7
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Only libraries that are using shm_open require linking
rt when creating the shared library. Stop including
it on every library and just add it to LOCAL_SYS_LIBS
in the one case where it is used (spdk_trace).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic13128873a76c355b14871a0dea0922488c9cd13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Make the DEPDIRS list a bit more consistent for
event_* libraries - they all depend on 'event' and
the specific library they are enabling, so always list
those first.
Next list the other event libraries that it depends on.
Finally list other libraries used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b1d72a0c738aeb9f30641d9e1e0235aabdbfb0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The log_rpc library serves little (if any) use in
isolation. It makes more sense to just include
this code in the event library. The event library
already depends on and uses the log library, and it
is natural to just enable these RPCs directly in
that library instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie39b8598ce0c06729a13d188ce00da44a996accc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No longer required to allocate from shared memory. No tools
use this anymore.
This removes the final call to the event library from iscsi,
so we also drop that dependency.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I41a6877b782cb927d9ac7d206ccd36a8195efc42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was not used by anything. It was intended for use by user-space
TCP stacks.
Change-Id: I416589e421784882c693bcc5b03fe1dbcc4b1bd3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4297
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was missed in CI, due to disabled SPDK_TEST_BLOBFS
test flag in UT job that performs check_so_deps.sh.
Error seen when it is enabled:
there was a dependency mismatch in the library blobfs_bdev
The makefile lists: 'bdev blob_bdev blobfs json jsonrpc log rpc thread util'
readelf outputs : 'bdev blob_bdev blobfs event json jsonrpc log rpc thread util'
Temporary workarounds have been added, ignoring blobfs_dev
in the abi check test. This will allow for better transition
on CI side. After this patch is merged, UT job flags on CI will be
updated to include SPDK_TEST_BLOBFS and abi reference repository
will be recompiled with this flag.
Next patch in series removes this workaround. It will be merged
after work on CI side is done.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4753a918d5760f154d4a59349747a0b1356e9c91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3961
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some SPDK apps were linked with env even though they
didn't use it.
Top-level makefiles can now specify SPDK_NO_LINK_ENV=1.
Change-Id: I057baa5b620f20d829185025dc2e8efdcfa03fac
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3417
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This patch removes implementation of VPP socket abstraction
along with ways to compile it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I089f7703cfc4fb517f8f80f4368e544bced549b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch has the basic infrastructure to support the accel
framework batching API but only for commands not HW accelerated
by IOAT, that will come in the next patch...
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6168831ac5698a9e58a81ef35ce919d75a72d0f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We need to add options to include ocfenv, rte_vhost,
and libiscsi for building with shared objects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ba144a6f0101cb84c5ae2d9595f4d58997a3a23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3000
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Patch below added writing out json configuration for accel modules.
(fad052b0) accel: add write_config json for accel modules
Out of two current modules, only idxd reported its confi out.
When idxd was not compiled in, then "framework_get_config accel"
RPC did not return a valid JSON. Following JSON was returned:
{\"jsonrpc\":\"2.0\",\"id\":1,\"result\":}
Where "result" never had any property given.
This patch adds array object to encompas all accel modules.
Next patch in series will try to address the issue on JSON
level.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0758db5406896f2a204920417619a3ab6fbde98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2550
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is an important aspect of ABI versioning.
There was a change to the spdk_bdev_opts struct
which is accessible from the public API that results
in an ABI change.
There was also a change in the spdk_accel_module_if struct that
will affect new modules so its major version needs to be revved.
There was also a change in the publically accessible rmda_hooks
structure which forced an ABI change in the NVMe library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5cc6886fe01b4adc2836b6e15995471f0361dc29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These had diverged. Make them work the same way again.
Change-Id: Ib6d93a7042584493315fe1e348dc8ede9ab320f0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As of now, all of the libraries and modules have their own
map file specified. Get rid of the generic top level one and
add a test to make sure that these files have been specified.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I329004e7442c7975731fc973455c93e724982952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2359
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds use of RDMA provider API to NVMEoF initiator.
Makefiles have been updated with new RDMA lib dependency
Change-Id: Ieaefeb12ee9681d3db2b618c5cf0c54dc52230af
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch updates NVMF target to use RDMA provider API
to create and destroy qpairs.
Makefiles have been updated with new dependency on RDMA lib
Change-Id: Iae35aea601380f8d1a6453a7fd6115f781e126f5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RDMA provider is used as an abstraction layer and allows
to add vendor specific verbs implementation. This patch adds
an interface to create and destroy qpairs and its implementation
using regular verbs API.
Future patches will add functions to queue/flush Work Requests,
enable usage of RDMA providers API in NVMEoF target/initiator and
add Mellanox Direct Verbs implementation. This abstraction layer
is flexible enough to add other vendor's implementations.
The choice of a specific RDMA provider will be made at
the configuration step, it doesn't add any runtime overhead.
Change-Id: If8eec5bd45c82c71f73a14f6e84121cd02a1d65d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the CRC function at the framework level and implement the
software engine back end to use ISAL. The patch series will continue
to include an option for accel_perf to test CRC as well as IDXD
implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4eff3bbcf98c0bc2928a48272a57031c8b96394e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2072
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
