Since ftl supports only one core thread ftl_thread
structure is not needed anymore.
Change-Id: I66eda9249d74b3eff0c4473dcd0aba4a6135e296
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This will allow the requests to be built from non-consecutive write
buffer entries.
Change-Id: Ifbb26c47ea1f3175e6529dba4b89350de92efe8e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fill in the child's iovec during its initialization by calculating it
based on the parent's iovecs and the request's block offset.
Change-Id: I61a1d5cf8a1ceae71e996d50db31077c43c4e3d9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/898
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter always has to be the same (device's write unit size), so
it's redundant.
Change-Id: I8775171fe2d526a6e87337e0398f3c9d18bc184d
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow ftl_io initialization with a iovec array instead of a single data
pointer. It'll make it possible to use the vector version of the IO
commands.
Change-Id: I34c1e398cea681f59321605e081366785aa29128
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since read thread was removed user IO read
should be processed on user thread.
Change-Id: I4088c215e342ac6ef1255057617a0a12976129aa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Process IO retries on IO channel poller. This patch
replaces retry queue associated with device with the
queue associated with IO channel. This patch also adds
putting IO write request on retry queue in case write
buffer is full instead thread message sending.
Change-Id: Iec9c9a4e858c90f1fe344bb298ff13ed0e13397f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/543
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do not complete user IO writes immediately but put them to IO
channel completion queue. This allow to complete IO requests in
batches and reduce need of unnecessary message sending in bdev layer.
Change-Id: I1bd1e076ff31e9e5faef70f9d0b3512d8f3a31b7
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/542
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch fixes condition used to change zone state.
Zone write pointer is an offset from disk beginning and
was wrongly used as an offset from zone.
Change-Id: I6cd42c6db78003812ec6d6bc75550bb7a5b067ca
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/954
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ftl_wptr_ready() return value is true or false so
it should return bool instead int.
Change-Id: I653e4ee1271d54f2e8c7b6fa0144a468faec4607
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Zone state should be changed to "full" when zone is
fully written.
Change-Id: Ib9ad29d1a0e788fba8a7eae881e07d384fa90548
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since zone reset is private for core thread it will be
always issued from core thread.
Change-Id: Ice03d339cb59548690ccf8f48d7c1606ee408a59
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Sine core module is responsible for handling IO it
should also handling zone reset logic.
Change-Id: Id8be4bb221cc85f207d44bd45761a72e263ea5ce
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is no need to support read operations on separate thread.
Change-Id: I10b595b8eeaf5fd0182f05913fdd5baa4b84961f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Adding support for handling media management events.
Change-Id: I1b87143ddd360e314385e8dc70359aeb0d526b5a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In order to handle media management events spdk_bdev_open_ext()
should be used instead spdk_bdev_open(). Move this call to ftl lib
to keep media management events internal to the library.
Change-Id: If4c9382cc89fc537667923f00d3dae5df0ace248
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
"lbk" name is more OCSSD specific so in
generic FTL "block" name is more suitable.
Change-Id: I792780297b792bf5e02f13cc20346da56b032918
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472284
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Zone append command allow to write to the
zone with queue depth greater than one.
Append location is read during write
completion callback.
Change-Id: Ie08ce8d31d5d0fb521cdc2b95f3e29b92e02e63f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471627
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Lba map could be updated during write
completion. This change is needed to have
common io path when append support will
be added.
Change-Id: I942bfd8b54dc6b40136ca53434f0ef8e3c415c5b
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch removes parallel unit and zone id fields
from ftl_addr struct.
Change-Id: Ica42208eafdbbecab60430708197f5f3ba6167d6
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This patch replaces NVMe Open Channel API usage
inside FTL library with corresponding zone bdev
API calls. This include following calls:
- spdk_nvme_ctrlr_cmd_get_log_page -> spdk_bdev_get_zone_info
- spdk_nvme_ocssd_ns_cmd_vector_reset -> spdk_bdev_zone_management
- spdk_nvme_ns_cmd_read -> spdk_bdev_read_blocks
- spdk_nvme_ns_cmd_write_with_md -> spdk_bdev_write_blocks
Change-Id: I1b5a6863d9ce72f4af1cfbb0e449fc1a5b638144
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: Ia4c6ec7b245600bca895f7802fb7f68c8d0400e4
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479845
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: I09781323b2ee25dbcee61eecf95ce7eca703ab93
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
ANM logic should be moved to ocssd bdev.
This patch temporarily disables ANM handling
by FTL library. New ANM handling mechanism will
be introduced in future patches.
Change-Id: I7d0261ee4e42496f60b82fbf6b39d9f84690024f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Moving to zoned bdev API will not allow to setup
physical range of underlying device so we need to
remove such capabilities from ftl device.
Change-Id: Ia807a11e992a221fce906d4ab122a6c3b1391280
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467949
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
FTL working on top of zoned bdev doesn't need
physical page address (PPA) anymore.
ftl_ppa was replaced with ftl_addr which represents
zoned device addressing schema.
Change-Id: Ied5750a7ab2f4ce42067ff3e69c1f26f85f5022a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467633
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Remove some Open Channel dependencies from ftl_ppa struct.
Change-Id: Ic088b84c56a928906c6c01c6ef74e69be6d0107f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479549
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ftl_ppa address do not need to expose group
information when FTL will move to zones API.
Change-Id: Iece1b32f9bcd8985260668c953089eb9951f13cc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This is starting point for moving current FTL
implementation which is working on top of
Open Channel NVMe driver to work on top of
abstracted zoned bdev.
This patch is changing name of ftl_chunk structure
to ftl_zone and start using zone states from zdev
interface.
Change-Id: I5429f489cc08a1ac27f09aba3dca4b40ea95eeb3
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Start processing ANM events only after the device is fully initialized.
Otherwise some of the structures are partially filled and can be
interpreted incorrectly.
Change-Id: Ia741730cf15d44d76ce8afa7955e6a5bf42ca42b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466935
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Track the number of acquired but not yet submitted write buffer entries
to be able to correctly calculate the required number of entries to be
padded.
Change-Id: Ie201681937ad1d03ec125aa5912311c54a7e35c9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466934
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When recovering the data from the non-volatile cache, the data inside
the volatile cache needs to be flushed before flushing active bands.
Otherwise, if the number of blocks in a band is smaller than the number
of blocks inside the volatile cache, part of the data may not get
flushed.
Change-Id: I4e99709c8c2a526a928578870d7fbd5fef37db02
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466883
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved scrubbing of nv cache to core thread. Added IO channel which is
used in user context, during shutdown of nv cache.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I88e680324e361bf7e0c0a9a9d29323f179c56e3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Track the band under defrag inside the reloc module. This allows for
multiple bands being defragged at the same time (e.g. extra one due to
write fault) as well as makes it easier to handle cases when relocating
a band that has no valid blocks.
Change-Id: Ia54916571040f5f4dfdb8f7cdb47f28435a466d8
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Padding size calculation should take into account
already acquired write buffer entries in case
number of blocks left for closing band is less than
write buffer size.
Change-Id: I0f9c9bc94eb5a4736eede30ec424c81103e1256f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463525
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed initialization of io channels to be made in the core/read
thread themselves. This fixes potential hangs when using the ftl lib
directly, without bdev and initializing an ftl device from a different
thread than will be used for IO.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I7089cc46cc6de5e9008e7c22cc01d2b4103ebb14
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464891
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an ANM event has come to a chunk/sector that has been marked as
high_prio (eg. after a write failure), there's no need to add any
sectors for relocation, as the whole band should be marked for a move
anyway.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I57824ba7e592540ea639f9f011149210fd688a5a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remember current write position within the cache when shutting down. It
allows for faster recovery after clean shutdown (no need to scan the
device) as well as grants a quick way to distinguish between clean and
dirty shutdowns.
Change-Id: I79c22caa0b1ca4373951ac43f747b085d331cdd0
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
In case shutdown occurs during band relocation
we can have situation that on retry queue are
some internal IOs and we need to wait to drain
this queue before we start shutdown sequence.
Change-Id: Ie5b33732568aeda0586f4de384b22dcf463bf31e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Changed write_config to use the ftl configuration file instead of
allow_open_bands directly. This allows for easier expansion of saved
fields.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ie1d480983636f26840dba9a3a6c93b2883903bdb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460519
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed touching NULL write pointer, which would happen after some other
I/O in the same band would receive error and issue its deletion. Any
subsequent write callbacks would then be unable to find and update the
information.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I07d9791f1b1b673a48356fae55b784c0bf6a6f7a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just assert to assure the Klocwork
static analizer that wptr is not NULL.
Change-Id: I003620431afb8497a57c50af8480c34ec3fac6d6
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462489
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The cache needs to be scrubbed during the initial device creation as
well as after power loss recovery. This patch extracts the scrubbing
code into a separate function.
Change-Id: I2cb32e6993a3531470f29f466d990f0d96e45def
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The header is being written from multiple places, so having a discrete
function serializing and writing it at the appropriate place in the
cache makes sense.
Change-Id: I7a1e6ebd05e8a4974d141f04202803f507b978e4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
This patch adds a function that marks all active open bands to be
flushed and once all of them are closed it notifies the caller. This
needs to be done before the data from non-volatile cache can be scrubbed
to make sure its stored on bands the device can be restored from.
Change-Id: I9658554ffce90c45dabe31f294879dc17ec670b9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459619
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added ftl_dev_has_nv_cache to check if the FTL is configured to use
non-volatile cache or not. It makes these checks a bit more readable.
Change-Id: I0140df184d89a675e40bd5056718cd64301c553e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Wait until all user writes are completed before writing band's metadata.
Otherwise in case of power loss, user data might not get written while
the metadata does, which would result in data loss.
Change-Id: I419862960c072e38265b91d0d0498ff0c6f9f29e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459615
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moving data from one band to the other doesn't need to be stored on the
non-volatile cache. Not only does it add unnecessary traffic to the
cache (wearing it out and reducing its throughput), but it requires us
to synchronize it with user writes to the same LBAs.
To avoid all that, this patch adds the FTL_IO_BYPASS_CACHE flag to all
writes coming from the reloc module. However, to be sure that the moved
data is stored on disk and can be restored in case of power loss, we
need to make sure that each free band have all of its data moved to a
closed band before it can be erased. It's done by keeping track of the
number of outstanding IOs moving data from particular band
(num_reloc_blocks), as well as the number of open bands that contains
data from this band (num_reloc_bands). Only when both of these are at
zero and the band has zero valid blocks it can be erased.
Change-Id: I7c106011ffc9685eb8e5ff497919237a305e4478
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458101
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some of the writes doesn't need to go through the non-volatile cache
(e.g. relocations, data recovery from the cache). This patch adds IO
flag to indicate that the write shouldn't be stored on the non-volatile
cache.
Change-Id: I3d485fe14cf25b3074832f26491ba0cb12ff0e58
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Initialize children IOs with the appropriate LBA of its parent when
allocating internal IOs.
Change-Id: I191ad741b9d88d7f18cae05982e0a06a8f371f78
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
This patch adds tracking of the phase of the writes to the non-volatile
cache. The phase is changed each time the whole buffer is filled. Along
with every block's LBA, current phase is stored in its metadata. This
allows for replaying the sequence of writes when recovering the data
from the cache after (unclean) shutdown.
Since there are only three possible phases to be stored on the device at
a time, phase is defined as a 2-bit counter cycling through 1 -> 2 -> 3
-> 1, with 0 marking blocks that were never written.
Change-Id: Id47880367934027fd102c32f183110acc9d4c62a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
After filling whole non-volatile cache, block all further writes until
the header with metadata is written. This means that metadata stored on
the device will always be up-to-date with the most recent write
sequence.
Change-Id: I15b724b52814289622374ce77e5c3b23173a75c6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
When creating FTL device using non-volatile cache, zero out the
non-volatile cache and store metadata (device's UUID, size of the cache)
in the first block.
Change-Id: Id8f212aef756e86e8a215582ab7c32a635e18938
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
In case ANM event occurs on open band there
can be situation that reloc will try to read
block on which there is ongoing write.
This is happening because lba valid map is
updated before write submission to allow sent
consistent metadata to disk before all user
writes are completed.
Added write offset to the each chunk and
add check to reloc if particular ppa is written
on that chunk.
Change-Id: Ic95a06e69381d2152a86984b65a0975afaff955d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458056
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Band tail PPA should be initialized when
new FTL instance is created.
Change-Id: Ie2fb72aa3f29eece0b6f8912998b33af3ba6b355
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457777
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Send ANM event to core thread for further
processing. This will remove a need of locking
in relocate module when ANM event occur.
Change-Id: I0efb1f1b8c96c107cda5fe78e8ee5672cde39f11
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Send LBA along with the data block when mirroring writes to the
non-volatile cache. The metadata buffer is retrieved from the metadata
pool, so the maximum number of concurrent requests is limited to
nv_cache.max_request_cnt, while the number of blocks in a single request
is limited by nv_cache.max_requets_size.
Change-Id: If260302d16039183fb0fe073ef7419947532cfab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458093
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added basic configuration details (transport type and address,
parallel units, cache info) as well as most important OCSSD geometry
data to get_bdevs driver_specific section.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I00c50706bd9203bcef1701be1b7d87e93c10e57f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456790
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Gives the ability to change behavior of restore after dirty shutdown
without recompiling ftl library. User can define if partial recovery
or error should be returned after such a scenario.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I6dda40df7b92d6a377957e4a70a3eab91a6ac4a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Direct wptr allows for writing to band with externally
provided PPA, rather than one assigned by the wptr. This
can be useful when padding open bands during recovery or
bdev creation, as ftl can find partially written end meta
with no way to close the band with valid data, that would
conform to an already written CRC value.
This does mean that I/O sender is responsible for calculating
and obeying per-chunk write pointer arithmetics.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ifcbc4e8ffb69c829469a571bed8e27b148d7a651
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455511
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Almost all I/O callbacks in ftl utilize data in ftl_io, which is
initialized as callback argument in ftl_io_init_internal. This patch
changes the behavior to always returning the ftl_io struct in addition
to an extra opaque buffer.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I611ab1b33575f599798a2bb65c231a724c852c7f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455831
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep lba map related fields in separate struct directly
in the band. Cleanup interfaces depended on ftl_md.
Lba map structure will be extended in next commit.
Change-Id: I1cfc2f2ff0c0e90bb63f39808780845673002e70
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453370
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Split the IO in case io->iov_cnt exceeds the FTL_IO_MAX_IOVEC. It allows
the user to pass any number of iovecs. Each IO request is now split if
necessary and submitted via ftl_io_call_foreach_child submitting each
child individually. Any resubmissions need to be handled on a child
level, as parent request doesn't track its children submission status.
Change-Id: If54249d54225b34191216a366c227f79215abc90
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Extended ftl_band_read_lba_map() interface to provide
range of lba map to read.
Added ftl_xfer_offset_from_ppa() function for
calculating offset of read portion of lba map
based on ppa address from IO. This offset is
used for coping read lba map portion to internal
ftl buffer.
Change-Id: I1c72a18c79eda8c33cd0b20ea36a5d9521a09d06
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449435
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This assert is not needed anymore.
Change-Id: I7bc85c980c2e120b105b35763b9bea5960564acc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456590
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep an array of iovecs tied to each IO. Internal IOs can have
iov_cnt > 1 without having to allocate additional memory. User's iovec
can now be modified too (e.g. when splitting the request).
Change-Id: Iec73c6dad59acdc331a1461fd7feac085138a8de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replaced single IO pointer with a queue. This allows multiple requests
to be queued when the writes cannot be scheduled.
Change-Id: I0cde50e7378108a6aab4ef6fe601cb854244f5d5
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455524
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On the user IO path, the flow always follows the same procedure:
allocate ftl_io and initialize it using ftl_io_user_init. There's no
point in separating these two actions.
Change-Id: I578347ccc7c85e5945368dd6bf76c58985af3939
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455523
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no point in synchronously returning an error from ftl_io_write
/ ftl_io_read as they're also reported in the IO's completion callback.
All errors are now reported through io->status.
Change-Id: I4adf4e13221b63715625276042e1172cd63b8f9b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Select the method of choosing next PPA to read inside ftl_submit_read,
as it can be deduced from other arguments.
Change-Id: I6cbd37c2c6d7f073bf735491b4960d72e327c4e6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Some of the internal IOs split the contiguous data buffer into multiple
iovecs to separate the requests. It's unnecessary and can be replaced
by checking the position within the data buffer.
Change-Id: I9255ea0072fee6c4e6a7dca21e4008780bc45610
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Advance parent's IO position when children positions are advanced.
There's no need to call ftl_io_advance twice for the same request
anymore.
Change-Id: I1f7f04a3a83575b11e7bf0b13c0c8f3bf98b5522
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Padding requests are issued in multiple batches at the same time
when shutdown occurs. This allows for faster removal.
Change-Id: Iea40d2418bedbd7cf3c6865e5eb8f85871db13cd
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454578
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the latest TLC NAND, one write buffer unit (rwb batch)
needs to be spread over three PUs instead of being allocated
to a single PU for better sequential read performance
since the optimal write size(ws_opt) of 3D TLC NAND is
3 times bigger than the optimal read size(rs_opt).
I added num_interleave_units in 'struct spdk_ftl_conf'
to configure the number of interleaving units per ws_opt.
If num_interleave_units is set as 1, the whole of the ws_opt
blocks are placed sequentially around each PU.
If num_interleave_units is set as N, the 1/N of the ws_opt
blocks are staggered. So consecutively numbered blocks
are separated by ws_opt / num_interleave_units.
The sequential read performance is improved from 1.9GiB/s
up to 2.97GiB/S with this patch on our system. No performance
degradation is observed on sequential writes or
4KB random reads/writes.
Please refer to the Trello card for more details.
https://trello.com/c/Osol93ZU
Change-Id: I371e72067b278ef43c3ac87a3d9ce9010d3fcb15
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450976
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Apart from writing the data to OCSSD, mirror the latest two bands of
data on the persistent write buffer cache. Currently the data is only
sent there, further patches will add metadata support, shutdown recovery
and L2P updates.
Change-Id: Ief05d0c23fa0e25bd6085e0ce3e1528d6736d174
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed unused 'context' parameter. Removed 'lbk' parameter from
next_ppa function signature, as it could be easily deduced from ftl_io
passed as the first argument.
Change-Id: I2b2b699ffc1b282086adcc2d4dc6c4691a87a7c5
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replaced all direct accesses to io->lba / io->iov with getter functions,
as they both should behave differently based on the FTL_IO_VECTOR_LBA
flag and io->iov_cnt respectively.
Change-Id: I0d387a2a908cc37afa9e1b97ca5b408cef0d6b08
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Moved early read completion (due to cache hit or reading unwritten
data) traces to ftl_submit_read to keep them in one place. Also removed
the context parameter from next_ppa function, as it was unused.
Change-Id: Ic69174a6cdc0e626550cd673789e86bb891094bf
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replaced the unnamed unions with named ones. It makes the assignments
easier (it allows for direct assignment instead of having to choose the
correct union member).
Change-Id: I130233a096070092275a040e73cbaf36106ae1ab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes incorrect LBA reported by traces (it reported the next one,
as the IO position was advanced before storing the trace).
Change-Id: I788853d729dd25e90c6c899be0616aa3a79d08b3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are no guarantees of the order of completion
of NVMe IO submission queue so wait for write completion
on specific chunk before submitting another write to it.
To control chunk occupancy split IO to child requests
and release chunk in IO completion callback.
Change-Id: I44147a21b528a7f33fb92b9e77d7de8f5b18f8ff
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7a7667e1c4e6321150e5bc8eb4287fb61847ccb5
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Extended the IO descriptors with the ability to group them together in a
parent / child(-ren) relationship. It allows to delay parent completion
until all children are done and enables the children to have additional
context in their completion routines (as opposed to having a single IO
describe all requests).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6ad111dc231813e397697109a333e2a5d7f5941d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is starting point for metadata refactor
which is needed for efficient ANM events support.
Change-Id: I81d864605e69008d8e3922fb61adf504187447a1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added means to configure libftl to use (optionally) another bdev as
persistent write buffer cache.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97028a681be168d9386eac8a226631ff772f803b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448629
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added internal retry IO queue. In case ENOMEM from
nvme layer request is put to retry queue. When some
inflight operations are completed try to make progress
on IOs in retry queue in first place.
Change-Id: Ie9d3d20bd34431ee57f9454f242b0cdca349c804
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I026902096686da37c0ca7086bb5d91b35d90ffa6
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
FTL should pass IO errors to upper layer only in
completion callback to be consistent on sync and
async error paths.
Change-Id: I29c81af477b476c1e10b7933126737a222553ffa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch allows to process more then one I/O
completion per reactor iteration.
Change-Id: Ib58013cd96c2b7fe378f175b34d58c6d1d219dcd
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447175
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
