This initiates an error recovery instead of a disconnect. The
error recovery may result in a disconnect if the qpair is not
recoverable. This also resolves an issue where the disconnect
may immediately release the resources associated with the rqpair,
but upcoming wc entries may still reference it.
Change-Id: I9d9e212a83129412e049c91c02725699ce2cac11
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425010
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that it is required to be on the same thread, the
message isn't necessary.
Change-Id: I714b77b46467dbcfa51186c8404c5976eaeea08a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424593
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I observed that spdk_nvmf_qpair_disconnect is only ever called
from the thread that owns the qpair - i.e. the one associated
with the poll group - with only one exception where the qpair
wasn't fully initialized. Add a check that enforces this
condition, as it will allow some major simplifications.
Change-Id: Ied434c9ea63fd4f2a6f9eacdf8f3f26a7b6bcf3f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424591
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was the only usage of spdk_nvmf_qpair_disconnect that
was not being called from the owning thread. Send a message
here so that spdk_nvmf_qpair_disconnect can be simplified
later.
Change-Id: Ic5fae4503a95f7183079a02544812a9fc5d4def5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424592
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
While here, clean up the trace application output based
on some debugging done with these tracepoints.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaf79f0ff8c80d0a6b9768ae0da213d57e98ec552
Reviewed-on: https://review.gerrithub.io/424286
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia728b4334a4f6abacdd94eecc45e27697e29522a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to filter tracepoints based on
the connection that generated them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3570c6613e477f4e14a85266b7e01f0fcb77f5db
Reviewed-on: https://review.gerrithub.io/424280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This no longer requires special handling - the event can be
acknowledged like all of the others.
Change-Id: Ib30cf35ec7aff45734ca6fe729e15d8fe41e3838
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Keep the code together. This is only code movement.
Change-Id: Ie52f1ab09e197192025f2b664df410ba6e1f06aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, this would release resources for requests if there
was an RDMA error on the qpair. Expand this case to include
scenarios where the qpair is in the process of intentionally
shutting down.
Change-Id: Ib018f190389ee2df20eba3dddcc7dcffdbb4909d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This guarantees that the qpair memory still exists.
Change-Id: I759197b90513f30488aa46bd26535c663e64dae6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423744
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't abort commands in states indicating an RDMA operation
is outstanding until an event indicates that all of the
work items have completed.
Change-Id: Ie2b83604bee142e383ffbcae088f4da0fd0fa658
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423413
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Due to polling order, a request may have completed its previous
operation successfully, but the queue pair may be in an error
state. In this case, move the request directly to the
completed state to release resources.
Change-Id: Ic0a5ba036af246b1b6155169cf9682e943b73120
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423412
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
thread
In debug mode this will verify that the state is being set
from the correct thread only.
Change-Id: I6234299d1fcdb63cd047417b6255c91e29991242
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423411
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an RDMA operation fails, initiate a queue pair disconnect.
Make sure all of the resources are released appropriately.
Change-Id: I8857ffc17b170279c7d30eb939fbe47da7bcdf5a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This call results in a syscall that should be avoided. We
can often use our cached value instead.
Change-Id: I11b5c5457ac2f68bfd46877d3bbc077a50dc9acb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Move most of the target opts from nvmf_tgt to nvmf_transport.
- Update transport create functions to pass in transport opts.
- When transport opts are NULL in transport create function, use
target opts. (for backward compatiblity)
- Part 1 of 2 patches. Part 2 (to follow after part 1 accepted)
will allow independent creation of transport with specific opts
while maintaining backward compatibility with current apps and
rpc configuration that still use the add listener method to
create a transport.
Change-Id: I0e27447c4a98e0b6a6c590541404b4e4be879b47
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/423329
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qp_context is only available for QP related events.
For other events we should not update ibv state as we try
to access null object data field.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id8d2fee090d9a40c7e00c866914c2eb164e7587c
Reviewed-on: https://review.gerrithub.io/422941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the case of failing to spdk_nvmf_poll_group_add_subsystem()
operation, the subsystem still needs to initialize the related
queue so that later coming request can be properly queued.
Also needs to correctly handle the expected state in this failed
condition so that when destroying the subsystem, it could be
properly handled.
Change-Id: I419f2ac7164c25258c3911952c38b9433fca762b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/422799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Instead of waiting until the first listen address is added,
create a protection domain and a memory map for every RDMA
device in the system. This consumes more resources when there
are RDMA devices that aren't used by the target, but it
will simplify some order of operations issues when listen
addresses and poll groups are added and removed at run
time.
Change-Id: Idfe6f8307decbf19e02765dbf67f03c2510a328f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/422602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to nvmf bdev.
Change-Id: I5b915abcccec930c3eb684d95bc64482e7887af5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the RXE kernel driver does not support send with invalidate.
There is a change to the kernel making its way downstream that will
enable this feature. At that point, we can conditionally enable
send-with-invalidate based on the kernel version.
Change-Id: I05c7bcbf8ec944be89c10bdf6ccc3229e4586914
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/422579
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
some vendorse support less send sge then SPDK_NVMF_MAX_SGL_ENTRIES.
Change-Id: I5b550b537b6ff4ae5d7876a3f277f88cf06049e4
Signed-off-by: Leonid Ravich <Leonid.Ravich@dell.com>
Reviewed-on: https://review.gerrithub.io/421012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The admin queue pair may get disconnected before
the controller is entirely destroyed and can't
be relied on to obtain the correct thread.
Change-Id: I5e80ef286693d53a161134610dd8354c458f8390
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/422134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: qun wan <qun.wan@intel.com>
In RDMA, qpairs can't be removed from poll groups because
the poll group defines the completion queue. So don't
allow this operation anymore, even if it were theoretically
possible on other transports.
Change-Id: I69a3d1b336decd2d25e43ddea94f8b2095ef662f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In the case that NVMe SSD itself has limited number of
hardware I/O QPairs, the corresponding abstraction of
I/O channel where upper module used to send I/Os down
will be NULL.
Add a check here for the NVMe-oF module and return the
error if the related I/O channel is NULL.
Change-Id: I97b799c6ecb026a01b0a414f1b49b949aa2407fd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416689
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After some other refactoring, we can now efficiently handle
IBV_EVENT_SQ_DRAINED events during error cases again, so do that.
Change-Id: Iba9ec59d9e6b72d8a6d8c7b74f3c3c532114a0a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421045
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvmf_rdma_qpair_recover
Also clean up some print statements
Change-Id: I67cfc9ea560298a310b1216d4542a981c0f1e8f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420938
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Decide which action to take based on a combination of the
nvmf qpair state and the RDMA qpair state.
Change-Id: I338ace9dd66dd8dcf81aa30e51758aa81768d7f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421162
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Claim the block device when adding it to a new Namespace,
and prevent the block device to be added twice for other
modules and Namespaces. Also remove the test that using
same block device over different Namespaces.
Fix issue #371.
Change-Id: Ib7ce18e9fde4a15c0f19ce9e28e69145e54570e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/420472
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No longer send an event to process the pending queue -
just do it inline.
Change-Id: I32716c9ecac3791de297c2a48529c15d220dbe6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
recover was only called by drained, and they're relatively small
Change-Id: I65002cfe13d0045a37609be5b85be087402b4a65
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421043
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There is no need to keep attempting to abort all requests later on,
there won't be any in these other states.
Change-Id: I7b12e10b87e0d0bb4a74fdf67fb278b443e70e8a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The state of the RDMA qpair is not entirely initialized (RTS)
until after the CM event is accepted. Delay caching the state
until then.
Change-Id: I39befb867fc6a01e94d7fc176071aaabb906bd07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
IBV_EVENT_SQ_DRAINED can occur during both error recovery and
normal operation. We don't want to spend time sending a message
to the correct qpair thread and then attempting to abort
all I/O in the case where this wasn't triggered by an error.
The case where this occurs during an error is very rare and
only in response to a user forcing the state to err from the
sqd state. For now, don't handle that case at all. Handle that
corner case in a later patch.
Change-Id: I16462ca52739b68f6b52a963f7344e12f7f48a55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This was the only call point of two very small static functions,
so merge them into the main body.
Change-Id: Ifdd3355ffd500ac5ad4fcf69feace65b35132906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420935
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The update call was never used independently of the get
call, so combine them
Change-Id: Ibae622e5fd23203e79ceeae1aeccc5c7d9d1ebc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420934
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
We should not use mutex, but use the spdk_send_msg policy,
then we can let only one thread to handle that and
eliminates the segement fault issue.
Now in the code, the qpair_mask is handled by the same
thread, e.g., the thread which owns the admin qpair of
the ctrlr.
Change-Id: I609fd4d49f5ecc85bc47bf9c23afbb507900be7c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Asking which thread we're currently on is more expensive
than sending a message.
Change-Id: I9d9007c9f7f30e4cdd9a97de6bf7a10b0e2a0594
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420933
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With the reordering of the nvmf_tgt states, we need to remove any
connections accepted during the shutdown pahse of the target.
Change-Id: I768484366da8273df74b8d52a3e8de6158b6995f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, qpair deletion was synchronous and handled by the
io_channel_destroy_cb for the target. However, with the new asynchronous
qpair deletion api, these qpairs need to be completely removed before we
free the i/o channel and the poll group.
Change-Id: I42c62391df62825d53e158306c4372523403ad27
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The poll group pause, resume, remove, and add functions are only called
from the subsystem_state_change_on_pg function. Previously, they would
return immediately and the state change would move on to the next
channel. However, some of these functions (specifically remove) kick off
asynchronous APIs and we should not iterate past them until those
asynchronous operations complete.
Change-Id: I78804273b39f2d171ba26ac4478ad515356833f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419289
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is necessary to avoid race conditions when freeing subsystems.
Change-Id: I9b4a7d006cc42cd29e13179e940ced0cc580f548
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This ensures that when we continue to iterate through channels after
deleting the qpair, we will be able to continue iterating through
channels.
Change-Id: I6fba43dc14a3e5e8faac78f8b37e9e0c6aad2687
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is necessary to free the AER without sending a completion to ensure
that the host does not attempt to send an additional AER upon receiving
the first completion.
Change-Id: I2b3f8f286d6396019d8ace97d2376547705b8d9d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA QP is attempted to recover after IBV_EVENT_QP_FATAL event
is received from IBV asynchronous event API.
RDMA QP is put into ERROR state and is not processing any inbound
requests. The outstanding requests are only allowed to COMPLETED
and FREE states, no outbound transfers are performed.
IBV_EVENT_QP_LAST_WQE_REACHED or IBV_EVENT_SQ_DRAINED event is
expected to follow IBV_EVENT_QP_FATAL, giving a go to draining of
all outstanding requests and freeing the associated resources.
The requests executed by block layer are gracefully allowed to
complete, but no outbound transfers are made.
Note, outstanding requests can not be reliably completed through
polling the CQ, as WC's with failure status might not have all
the fields valid. The failed WC's are dropped and the outstanding
requests are fetched from the appropriate state's linked list.
QP recovery is triggered when there is no more outstanding requests.
If QP recovery is completed succesfully, the RDMA QP is put back into
ACTIVE state, the QP disconnect is triggered otherwise.
Change-Id: I45ee7feea067f80ccc6402518990014d691fbda3
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416879
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It appears that we can get caught in a loop when shutting down a
subsystem if there is a qpair that has been moved to the deactivating
state due to the target shutting down early. These qpairs don't have a
state cb and won't ever be destroyed or removed from the global list.
Change-Id: I4f9ed774a94e0e2c7ff7bfa3af1776b38a787035
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419269
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Requests that are being put into IBV context are lost when
IBV QP breaks and its SQ drains.
In order to track NVMf/RDMA requests, RDMA QP has been
reworked to track requests at any state with queues of
requests for each state.
This allowed to get rid of a few intermediate queues and
request counters.
A couple of states has been added to track outbound requests
with and without data. They will be used by QP recovery for
freeing resources assigned to outstanding requests.
Change-Id: Ie84207325c38e5bb2c247cd6dcddb82dfad0d503
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed unneeded (and too generic) #define errors.
Change-Id: I26343504aaefb7e982d4dca35ffade8c70406f08
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/418881
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Most of the error paths in this function leaked resources. Make them
all use spdk_nvmf_rdma_destroy() so all resources are consistently
freed.
The spdk_io_device_register() call is moved to the top of the function
so that the io_device is always valid when calling the destroy function.
Change-Id: Ic92f09f157ee8245fb962d8bc3330aadd87b294a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418869
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
rdma_get_devices() may return NULL on failure; we need to check for this
before dereferencing the returned pointer.
Fixes GitHub issue #360.
Change-Id: I9628e5865365d256f4b1887bf07ce8737b55d356
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
New header file for NVMF FC transport defining FC data, functions
and low level FC driver interface.
Change-Id: I3fd24e93cefa06647003eeb27d79166469fb4a05
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/415057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I59f4f69ed695cc9a2b6d0b87052fdf50004ee1c7
Signed-off-by: Senthil Kumar V <senthil.kumar.veluswamy@wdc.com>
Reviewed-on: https://review.gerrithub.io/418170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I54793624e46a4e51b0c989ddfe933ccb5f035123
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/417858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qpair_disconnect has previously presented an entirely synchronous API.
However, it relies on other asynchronous operations to complete its
task. By giving it an asynchronous API, we can avoid possible race
conditions. Patch 1 of several.
Change-Id: If9e26ee70ae5d6c0273750226b4408a8e4587e19
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also report that the NVMe-oF target does not support Flush with the
broadcast NSID.
Change-Id: Iad761a6f81eb099940463a67074a6dccb8871b70
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the uses of SPDK_NVMF_FABRIC_SC_* were neglecting to set SCT to
indicate that these status codes are from the command-specific set.
Change-Id: Ief2a77e06d69e5925f8d8b1ec89ff2612250dcf0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416430
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the qpairs are stored on the poll groups,
reimplement abort handling to search each one. This
doesn't add new functionality compared to before - it
still only aborts AER commands.
Change-Id: I73651cf412b10f91a14be68bd9b8c03d8f22626e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415318
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove the list of qpairs per controller.
Change-Id: I6aaeed43c64b38b60c5a609123b3542bb7130a90
Reviewed-on: https://review.gerrithub.io/415317
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2eb84490144c2e1f772c4094645e5067149d2862
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415316
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be re-added later in the series, implemented
in a different way.
Change-Id: I1f9df22025eb37f7f58ce1547862f61906ea557c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5297c7a869402c96f69d705a13529c32296a9eaa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415314
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I0c6c410d120bec830ec17105de43ca62bf202b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is only code movement. Nothing changed. This is
preparing for a rewrite of the qpair disconnect path.
Change-Id: Ic782c090293a5b2e4baaba9c222479dbb2b64fec
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415312
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Redundant with lib/nvmf/rdma.c spdk_nvmf_rdma_create,
line 1177 and 1178:
rtransport->transport.tgt = tgt;
rtransport->transport.ops = &spdk_nvmf_transport_rdma;
Change-Id: Id680c5537aa3df70d6f8c148aa8dc2726ccf8877
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/415203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was partially fixed in commit 1e481d0438 ("nvmf: Do not allow NN
to change while connections present"), but we did not handle the case
where the user asked to add a NS with a NSID outside the current NN.
This patch reworks the logic (again) to be more straightforward and
hopefully more obviously correct.
Some confusion between max_allowed_nsid and max_nsid is also clarified;
if max_allowed_nsid is set, then max_nsid == max_allowed_nsid at all
times, so we don't need the extra logic when calculating NN in
spdk_nvmf_ctrlr_identify_ctrlr().
Change-Id: If531baf1114e03441ff3e1e1be098071702d9056
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is one of the construct_nvmf_subsystems parameters, so we need a
public API to retrieve it for informational purposes and for the
JSON-RPC configuration dump.
Change-Id: I8a7cafa487209311e964ea9ff1b8e09ee8b23c07
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the old trace points since they didn't actually
work. More trace points should be added in the future.
Change-Id: I1b658af8e309137882c31460723d7bb94d555b79
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414280
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I9552354d620986c2a3d6b071f32b587e9e683198
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The qpair mask can be used instead.
Change-Id: I9063e656c7c44663dc96adfd5ef52a5a1065d2ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413860
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of scanning a list of all qpairs, use a bit
mask to determine if the requested QID is unique.
This is not for performance reasons, but because
eventually the ctrlr's list of qpairs is going to
need to go away.
Change-Id: Ic25ee60e4f9cd9d596815719760d5be892f29d0c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413286
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
QIDs need to be validated for both I/O queues and admin
queues, so move the checking to a common path.
Change-Id: Icb2009b3fe4d70f146b741c046812d9df62cc2fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413859
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This one is actually a bit tough to deduce in the specification.
The NVMe-oF spec says that QID errors detected in the RDMA
transport shall return an RDMA-specific error indicating
the problem. However, our code doesn't detect the error in
RDMA-specific code, and it isn't clear if the language is
a "must" or a "should".
The NVMe specification does clearly indicate what error
to return on invalid QID in response to a Create
I/O Queue Pair command. For now, return that while
we game plan whether we need to call into the RDMA
transport to correctly report this error.
Change-Id: I7faf37bad9b9202bc50a906214a51c17e4808fc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMf cnx acceptor poller is changed to check the asynchronous events
from the RDMA devices.
RDMA async events are polled together with RDMA CM events; the file
descriptors are combined into a poll fd array and processed in a single
poll syscall.
The errors handler is an empty placeholder for this patch, it just
prints the kind of event read from the IB device context.
The work for implementing event handling is left for later.
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Change-Id: Ib167990651b585090aceef1404a88d431a910226
Reviewed-on: https://review.gerrithub.io/412540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are trivial to abort: since we just hold on to aer_req until an
event is triggered, we just need to set aer_req back to NULL and
complete the request.
Change-Id: I74ffe7a227fcaf816c0c584fe5c82a940475687f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Combine request lookup and abort into a single operation. Keeping them
separate would result in duplicating a lot of logic for finding the
proper list from which to remove aborted requests.
This is still a no-op for now, but it paves the way for aborting
requests that are still queued in software.
Change-Id: If8f268521f2c9f93b413261d87e9f39e539813aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412880
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I12e629d21f30372ae3c0d3939c036b0ae3562e6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412992
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This path works for disconnect events on qpairs at run time.
Disconnects in response to killing the target have
not been worked out yet.
This path does not currently wait for outstanding I/O to
complete.
Change-Id: I8e476c8444b460c18e51601fb950b9132d12f67d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412076
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Per the NVMe specification, NN cannot change while there
are connections present. There was originally a check
for this that was removed in commit 763ab88 to match
the behavior in the Linux kernel. However, after a
discussion with the NVMe specification committee, SPDK
was originally correct.
Change-Id: I42414d1ee0c8c83f3335d8790edbf65d813c5c74
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412544
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec says that Identify Namespace should return a zero filled
data structure for namespaces that aren't active, rather than failing
the command with a status code of Invalid Namespace or Format.
Change-Id: Ia9156477d8701694f8b295a67e1669fd09e2cb62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
