SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow the user to set the source address when connecting to a NVMe-oF
controller.
Change-Id: Ice3add4b2cd3b64fdb8d0d7807d2235f90fd86b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Requests may need to be split in which case a child
request may have a size smaller than the SGE that
contains the child request's payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c7ab76104d56fa9dde168cfdddb6320c7157f98
Reviewed-on: https://review.gerrithub.io/372347
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For ioq, target is supposed to respond with the same
cntlid as specified in the connect capsule, but the
Linux kernel target doesn't actually do that. It really
only needs to be set on the adminq connect, so just
do that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4eec605f856bdad2c8614d505241566a9fe292ab
Reviewed-on: https://review.gerrithub.io/372345
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The Linux kernel NVMe-oF target can easily be misconfigured to report
newline-terminated strings from the discovery service, since its
parameters are set by echoing into sysfs files, and echo adds a newline
by default.
Newline characters are not allowed as part of the TRADDR and TRSVCID
fields, since they are defined as ASCII strings in the NVMe specification
sense, which limits the acceptable characters to the 0x20-0x7E range.
However, we can add a workaround for misconfigured targets with trailing
newlines that shouldn't impact any valid configurations.
Change-Id: I5db183d5637128fa8d50c245f4bfa965cc3ce8e2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370593
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gai_strerror() is documented as thread-safe, so this should be safe to
use from a library.
Change-Id: Ia0ec0b5c387db8993dd1ba3a3029562f25cc210d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369642
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1e272c63a5d863c92f1aa8299a9d98dcb72d0b13
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365082
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Preivously, we can only get part of the log page
entries due to the limitation of buffer. With this
patch, we can get all.
Change-Id: I81b8afc73c108dac65d1ff5fe8d03bda41fa29a1
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/363323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An ECN to the NVMe 1.3 specification has clarified that the NQN may
contain 223 bytes before the null terminator. Make all of our NQN
length checks consistently enforce this behavior.
Change-Id: Iebfd57d11abea64964c7a6ad9d886e40efa243c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Register all spdk_malloc() memory regions as ibv_mr in a spdk_mem_map
so we can look up the RDMA key for the user's buffer and pass it in the SGL
directly, rather than copying through a pre-registered bounce buffer.
Change-Id: I7340bc2020b5256750c95dbd24ba67961404e5e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The send completions must be processed prior to the
recv completions. However, if the completion queues
are separate this leaves a small window where
a send+recv completion arrive between polling
the send_cq and the recv_cq, resulting in the code
seeing the recv completion prior to the send
completion.
By combining the completion queues, this eliminates
any potential gap. The send completion will always
be processed before the recv completion.
Change-Id: I06bfef6af48559d0b9e00524ebc10f1a102e7387
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These allocations need to be from memory registered with the SPDK env
library to allow future work on automatic ibverbs memory registration.
Change-Id: I6ec6999ecd6d6bf6ba4ab159630f7d01f3d46154
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the ibv_recv_wr initialization in
nvme_rdma_alloc_rsps. Thus we can save some
CPU times
Change-Id: Id449b2684290431f8b3ba97ec4058171d34038bf
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
We do not need to set it for submission since the contents
are same
Change-Id: I345094e2e8a858b318be73d28f09393566587d95
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The PCIe transport initializes the quirks directly, so the generic hook
to get PCI ID is no longer necessary. This path was dead code.
Change-Id: I25bdaa598db53e4312a264d9d8356d1b416696e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is more CPU efficient than only grabbing one
completion per call to ibv_poll_cq.
Change-Id: I0c70d33639f0f345482d9e7c810f9c6723937058
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
In our previous code, we did not ack the event in
exceptional cases when we get a event via rdma_get_cm_event.
Thus, the code may block with in this statement:
rdma_destroy_id(rqpair->cm_id);
in some exceptiaonal cases. And this patch will solve this
issue.
Change-Id: Iddb6fb5356a5ee0ed04e261a040ba53042fca302
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Preivously, we only supports probe the NVMf target
via discovery info, now we can support to directly
to connect it.
Change-Id: I08ce1d95de6744286357e68b48c97b773b902ac8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
(1) Add nvme_rdma_build_sgl_request function
(2) Merge nvme_rdma_pre/post_copy_mem to nvme_rdma_copy_mem
Change-Id: I86abab821b32b4da0aa9489a6b9f7dc430333159
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Now that the hotplug code is isolated in nvme_pcie.c, it can call the
PCIe transport attach function directly.
Change-Id: I2df3b9168473b537cc9b13367e06d3d3b6fa22be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spdk_nvme_qpair::num_entries value is never used in the common code,
so move it to the individual transport qpairs to make it clear that it
is a transport-specific implementation detail.
Change-Id: I5c8f0de4fcd808912ba6d248cf5cee816079fd32
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of passing the work completion, just pass the
response index. This keeps the work completions localized
to the polling function.
Change-Id: I0e6a1d8564200b5ac3aa43dfd58ae152d439bbd8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This eliminates an if statement, since the two callers
of this function know the desired queue size.
Change-Id: I28fabac8613f7b8fc7d96cf95b085b6e4dcf985f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Just call the regular qpair create function instead.
Change-Id: Ic35b1eb6fcdf0d82733ea573a493f583dd63d5bd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the num_entries value in the generic qpair instead. These
values had to match anyway.
Change-Id: Ia6400fbaba97df3ef6db4dc07a2ab95af1e5143f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Avoid an extra level of pointer chasing when we are filling out the NVMe
SGL.
Change-Id: I1a40af16fda80f7480c419524876bfb1a1902eb8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This intermediate function is no longer needed.
Change-Id: I3523cc6d8f3b290165a953d42cca8b76eda762c5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Sending the fabric connect command is part of establishing
a connection, so move it into the main connection-establishing
function.
Change-Id: I55e7ffdd16b576c81b51d7d3910203f9afc1f4c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This function initializes the members of an existing
qpair struct. It doesn't construct one from scratch.
Change-Id: I0b9afac1ad25cfb217efd146702f693c74f5f697
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
No need to allocate all of the requests and responses until
we know a connection can be established.
Change-Id: I072a10aadfd7ced773634448f7d7e788622d0a4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The code is clearer if this function is incorporated
into its only caller.
Change-Id: I33901cddf80ae27896b2acfd1b9e7d212f21f5f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is resolving the address and route to the target, not
binding a socket to an address.
Change-Id: I80055481ed2e020410a1e186a4e7371b60faaee9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We should be sending the bounce buffer's remote key to the target so it
can put it into an RDMA SGE on the remote side.
Change-Id: Icded155ad2292c67baa722f001c9c07178bc2754
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
