This patch is for DIF check types.
Add enum spdk_dif_check_type to DIF library.
Add a field dif_check_flags to struct spdk_bdev and add
spdk_bdev_is_dif_check_enabled to bdev APIs.
Added enum is intended to improve usability. If no enum, the
caller will have to get raw data of flags and mask each bit.
Change-Id: Ia46a37a9684dc968dcc51963674f0a9963e0cd4d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is for DIF settings.
Add fields dif_type and dif_is_head_of_md to struct spdk_bdev and
add APIs spdk_bdev_get_dif_type and spdk_bdev_is_dif_head_of_md to
bdev APIs.
The fields dif_type and dif_is_head_of_md are added to the JSON
information dump.
Change-Id: I15db10cb170a76e77fc44a36a68224917d633160
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443184
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To support DIF, bdev will need to expose the following information:
- Metadata format
- Block size
- Metadata size
- Metadata setting (interleave or separate)
- DIF settings
- DIF type 1, 2, or 3
- DIF location
- DIF check types
- Guard check
- Reference tag check
- Application tag check
This patch is for the metadata format. Subsequent patches will do for the DIF
setting and DIF check types.
Add fields, md_len and md_interleave, to struct spdk_bdev and add APIs,
spdk_bdev_get_md_size and spdk_bdev_is_md_interleaved, to bdev APIs.
The fields, md_len and md_interleave, are added to the bdev JSON infomation dump.
DIF will be used only in the NVMe bdev module and the upcoming virtual
DIF bdev module first. But additional required storage by md_len and md_interleave
will be very small and they are simple. Hence add them to struct spdk_bdev simply.
Change-Id: I4109f6a63e6f0576efe424feb0305a9a17b9b2e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443183
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function gets used as a function pointer, which
seems to keep the compiler from trying to inline the
function. Stack manipulation was showing up in the
perf profile pointing to this. Marking the function
as inline gets it actually inlined in the hot I/O
path.
Improves bdevperf microbenchmark from 78M to 85M IO/s.
Cores are virtually identical - 11.4M on core 0 and
10.4-10.6M on remaining cores.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iadced071dfc07fc09db6da3571c930988b2dc3fd
Reviewed-on: https://review.gerrithub.io/c/443278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This keeps the hottest structures at the head of the
cache and helps improve performance.
Improves microbenchmark (8 null bdevs on 8 lcores,
bdevperf seq read with qd=1) from 67M to 78M on my
Xeon E5-v3 system. Core 0 performance remains about
the same (10.7-10.8M) but others cores improve from
around 8.0M each to 9.4M.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3ccf94ab39b6f911127f0bd1016e352027b11fc
Reviewed-on: https://review.gerrithub.io/c/443277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unmap, discard, write zeros will be sent down from
higher stack. Remove these IOs for the QoS limit.
Change-Id: Ieb3cc19f31c43f8ddf8f8d2fd338f442ef48b679
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
_spdk_bdev_io_submit uses the bdev_io->internal.in_submit_request
flag to ensure we unwind in cases where the I/O is completed
inline (i.e. malloc or null bdevs). But when an I/O gets queued
for QoS, and then we iterate through the queued I/O in
_spdk_bdev_qos_io_submit(), this flag was not getting set
when those I/O would get submitted to the underlying bdev. This
would allow for _spdk_bdev_qos_io_submit recursion, resulting
in all kinds of different types of memory corruption.
Fixes#613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29263f4e7b2ead60f08b60474d210defa803348c
Reviewed-on: https://review.gerrithub.io/c/442127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch added two new function pointers (queue_io,
update_io) for related qos operations like iops and
bandwidth rate limits.
Change-Id: I2ffd67c5f1c421eab448fd5e95f809da55805fcd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There are some patches to linux kernel for separating
out discard IOs that are written to /proc/diskstats and
the various /sys/block/*/stat files. The following additional
fields were added to these files:
Filed 12 -- # of discards completed
Filed 13 -- # of discards merged
Filed 14 -- # of sectors discarded
Filed 15 -- # of millisecond spent discarding
SPDK could provide these raw information to bdev_io_stat. Users
can use these information to calculate more states of block device.
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Change-Id: I517d67f0ff0159baf04e24732a8fd0ccefcb9c46
Reviewed-on: https://review.gerrithub.io/c/439057
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The underlying io_channel created by a bdev module
could be never freed in various cases due to missing
spdk_put_io_channel() calls.
Change-Id: If1aa736f67f0354c4f9dcdf61d3f1e6b859b4c48
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since bdev->internal.mutex protects variables in bdev->internal,
there's no need to init the fields of spdk_bdev_desc struct and
free the struct when claim_module exists within the mutex lock.
Reducing critical area could help to reduce lock competition
caused by opening bdev concurrently.
Change-Id: Ie6b2a63e44a97cfed914fa6d8adef2c5ec3ac300
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/438514
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When create channel, the fields that _spdk_bdev_channel_destroy_resource()
checked are always be set to non-null. Remove these unnecessary if
statements makes issue exposed more easily if something goes wrong.
Change-Id: I2d505c87176d4d49eb1528a258e4bea6477e0fe6
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/438799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since division is more expensive than right shift operator, in
function spdk_bdev_bytes_to_blocks, use right shift instead of
division if the blocklen of bdev is a power of two.
Change-Id: Ib3dbc792e86582bba30b3dc028efbd12c69075ba
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/438318
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the case the QoS thread has not properly initialized yet,
needs to go through the regular QoS enabling process to notify
all the channels and also disable the QoS properly. The channel
and poller related staff also needs to be handled together
with the thread.
Change-Id: Ifc2b2cdfb1181aa6418ad1d43ae5905c0c317549
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/437519
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously, if want to know which mask bit is used for specific
trace group, the only way is to check source code. Now list
each trace group with its trace tpoint group mask bit in
usage message
Change-Id: I7a85fe9c0885f1919f6ffbdc97dab81f1986fb07
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/435448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be required in following histogram patches.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I2eee6629243b7a4838a80dc1de33ae485c58081e
Reviewed-on: https://review.gerrithub.io/433874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are some use cases such as multipath and RAID expansion where a
vbdev could have been registered before one of its base bdevs.
Currently we unregister bdevs at shutdown in reverse order of their
registration. Continue to do that in general, but skip any bdev that
is still claimed. Any bdevs skipped in this way will eventually be
unregistered once any bdevs that have claimed it have completed
unregistration.
Change-Id: Iafde9558430bc5ce56e8608ef50bcb2b5fbfbf71
Signed-off-by: Andrey Kuzmin <akuzmin@jetstreamsoft.com>
Reviewed-on: https://review.gerrithub.io/432136
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Now, that _spdk_bdev_io_get_buf offers allocating aligned buffers,
add possibility to store original buffer and replace it by aligned
one for the time of IO.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: If0ed306175631613c0f9310dccaae6615364fb49
Reviewed-on: https://review.gerrithub.io/429754
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is requirement for following patch. Requests that will
reuquest bounce buffer can only allocate limited size buffer.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I850b614305d66065733381ceb7bd67d4b1cad6b3
Reviewed-on: https://review.gerrithub.io/430783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch changes the name of the field. Following patches
will introduce logic that will guarantee that buffers
provided to bdev module will be aligned to value
specified in this field
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I5329b9fe26ef2417bc7beae86518cc643b263f97
Reviewed-on: https://review.gerrithub.io/430782
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
SPDK poller function will return the different value for
the different status. Update the QoS poller for this change.
Change-Id: Ia384bf00a23713df663c317b1997ead441c5adcb
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/428573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initiailize fields later assumed to be NULL
Change-Id: I61e054dd275c6c04fb3f826adc445e56f0add331
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/428304
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96b5410a92f176aef11e00829fdebd36910ac2d4
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/428302
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Large read I/O will be typical in some use cases such as
web stream services. On the other hand, large write I/O
may not be typical but will be sufficiently probable.
Currently when large I/O is submitted to the RAID bdev,
the I/O will be divided by the strip size of it and then
divided I/Os are submitted sequentially.
This patch tries to improve the performance of the RAID bdev
in large I/Os. Besides, when the RAID bdev supports higher
levels of RAID (such as RAID5), it should issue multiple
I/Os to multiple base bdevs by batch fasion in the parity
update. Having experience in batched I/O will be helpful
in the future case too.
In this patch, submit split I/Os by batch until all child IOVs
are consumed or all data are submitted. If all child IOVs are
consumed before all data are submitted, wait until all batched
split I/Os complete and then submit again.
In this patch, test code is added too.
Change-Id: If6cd81cc0c306e3875a93c39dbe4288723b78937
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When destroy qos, spdk_bdev_qos_destroy() allocates a new qos, and swap
old one. After spdk_bdev_unregister() frees the new qos, the old qos poller
may still reference new qos via bdev->internal.qos. Fix this error by
using old qos in _spdk_bdev_qos_io_submit().
Reported in 72aac51430.1539054028/ubuntu16.04/build.log
Change-Id: Id1bce6c8b1cefae604dd2c69e8f3482ec34b1b54
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/428444
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch added the support of RPC method to enable,
adjust, disable the bandwidth rate limit on the bdev.
And it can work together with the existing IOPS rate limit.
The RPC method has been consolidated to support both IOPS
and bandwidth rate limits as below:
usage:
rpc.py set_bdev_qos_limit [-h]
[--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I9c03cd635280add01801a81c6a6c02f0cf85bee1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416511
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
scan-build requests to check the size of parent iovec by using
artificially large LBA in unit tests.
Fix the error by using not pointer but position and checking if
position is less than count of parent iovec.
Change-Id: I74c4f6d1b68ecfca93e9247acc5ac6bd5412a960
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427965
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently write to bdev fails in _spdk_bdev_write_zero_buffer_next
due to other than -ENOMEM, assert is called.
RAID bdev using this feature is generally availale now and it will be
OK to remove this assert and return error instead.
Additionally, applying the factored function to _bdev_write_zero_buffer_next
will improve readability slightly.
These two changes are done in this patch.
Change-Id: I462630a71e57e2e5146b085b215d62a378ea9402
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch factors out that operation into a function and adds
error handling to that operation to improve readability slightly.
Change-Id: Ic24df0c0a9abbebc38d30fc17779dc5a5f6138a6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Currently when read/write to bdev fails in _spdk_bdev_io_split_with_payload
due to other than -ENOMEM, assert is called.
RAID bdev that utilizes the split IO feature is generally availale now
and it will be OK to remove this assert and return error instead.
Change-Id: I6ea6fd45b94bff0ea84e498e0c4dfd1dd31e0260
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a bdev IO is split, if iovec size in a strip is more than 32,
the IO will fail.
Remove the limitation by spliting the split IO further.
Change-Id: I962ad86dfe63ea1fcd86ffa52ead7452fb80e53d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
To achieve its goal, this patch changes the order
in which bdev modules are finished. All modules
that examine bdevs (e.g. lvol,split,...) will be now
finished last. It should not cause any issues though,
since all bdevs are already removed at the time when
any module finish is called
Fixes#387
Change-Id: Id60c375eb5c3d7306b69cdce86bded77354868d8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421158
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of the second parameter `success' of spdk_bdev_io_completion_cb
is bool. Hence change the code to use bool type success or failure.
Change-Id: I9e93f4ccbb085e8e184f209e706915dcd34aa966
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/426648
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We cannot split an iov if a buffer hasn't been
allocated yet. So always call spdk_bdev_io_get_buf
on reads before trying to split.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2c26efb9dc6cb2c7c3e3b7ae5bab2c37844b9113
Reviewed-on: https://review.gerrithub.io/424879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_bdev_io_put_buf() is responsible for reclaiming
bdev-allocated buffers from a bdev_io. If there are
bdev_ios waiting for one of these buffers, it calls
spdk_bdev_io_set_buf() on the next bdev_io in the queue.
This will set the iov_base and iov_len on the bdev_io
to point to the bdev-allocated buffer.
But spdk_bdev_io_put_buf() was calling spdk_bdev_io_set_buf()
on the just completed bdev_io, not the next bdev_io in the
queue. So fix that.
Fixes: 844aedf8 ("bdev: Simplify get/set/put buf functions")
Reported-by: Alan Tu
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbcad6e35a3db6991bd7deb3516229572f021638
Reviewed-on: https://review.gerrithub.io/424880
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When new bdev was created, the struct spdk_bdev_module::examine_disk()
may open and close bdev. On the other hand, if something goes wrong,
the creation procedure may unregister new created bdev, so race
condition appeared between _remove_notify() and spdk_bdev_close().
Add the new field "closed" and "remove_notified" in struct spdk_bdev_desc,
so _remove_notify() and spdk_bdev_close() knows how to deal with this
situation.
Change-Id: Ibfe915a4d76096796b039a13a4f49f26669eba2c
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/423369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_close() must be called on the same thread as
spdk_bdev_open(). Further, the remove callback on the
descriptor will also be run on the same thread as
spdk_bdev_open().
Change-Id: I949d6dd67de1e63d39f06944d473e4aa7134111b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424738
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When emulating write_zeroes commands on device that
don't natively support it, we submit a write with
a zeroed buffer. We used to just reuse the original
bdev_io, but that was recently changed due to other
splitting code added for iovs. But when making those
changes, we forgot to free the bdev_io for the
write that was sent down to the device.
Fixes: 183f37e8 (bdev: do not reuse bdev_io when...)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If08782c65f6305c0a9f9d15d74fd8823e1158e9b
Reviewed-on: https://review.gerrithub.io/424733
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This RPC does not work for a lot of bdev types. For
example, NVMe namespaces and virtio scsi LUNs are not
explicitly constructed by an RPC - they are indirectly
constructed by an RPC associated with an NVMe controller
or virtio-scsi controller.
While here, remove spdk_bdev_config_json. It was
only created to facilitate this get_bdevs_config RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I537166d8f91ab458bd2000859d74f7254bfc9c0a
Reviewed-on: https://review.gerrithub.io/424584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This isn't valid RPC so it needs to be removed. Bdev modules were
working around this issue by defining empty write_config_json
methods.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c4c20249eadfcfb4103430f5801190b14897249
Reviewed-on: https://review.gerrithub.io/424582
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
