Test multi vector command that needs to be split by strip and then
needs to be split further due to the capacity of child iovs.
Add a case that was not tested before. In this case, the length of the
rest of iovec array with an I/O boundary is the multiple of block size.
Expect the rest of iovec array to be submitted in the completion of
previous iovec array.
Change-Id: I5b95b1f1884a73b31709b2fd9187a8a9e9b2cd0b
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Nested lvolstores take a very long time to create,
since the initial unmap will get broken into
one unmap per cluster for the underlying lvol.
This test is working fine in the test pool, but they
have much smaller SSDs. My system has a 3.7TB SSD,
and this test times out.
So don't bother clearing the nested lvol store - this
saves unmap operations. We still have unmap operations
when deleting the nested lvol, so increase the cluster
size for the main lvolstore to 1GiB to reduce the total
number of unmap operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29a254fff443e963cd620b55e78092d6a96f8ddd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Just name the malloc bdev explicitly. And since there
is only one bdev, remove all of the unnecessary loops.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie3b55161d6ebee64497bc9726edaa3fbf04bb445
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454690
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1) remove unnecessary disconnect for cnode2 - this
subsystem doesn't exist (and the || true was
hiding the failure
2) remove || true from the cnode1 disconnect
3) remove extra spaces when assigning nvme_model -
maybe these spaces are OK on some versions of
bash, but when I run this locally this doesn't
work at all
4) remove trailing spaces from model returned by
identify data before comparison
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If3dd7ddc2ba44fc880e5b398b5fe0922b6637b80
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454689
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A few test scripts were creating 128MB malloc bdevs
instead of 64MB - but there's no real reason for the
difference. So make them all the same. A future
patch will make all of these size variables common
instead of duplicated in each file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I865ef08f384e026d0d3e7b064fb3a2d5958f054c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454688
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding the second bdev doesn't provide any real value since
it's the same kind of bdev.
While here, explicitly name the malloc bdev to simplify
the test some more.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ide6da901d4b90383cc73fa195b5a070a8eda0d01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454687
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1) specify malloc bdev name explicitly
2) just use a single loop variable
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fb4fc28715f7303fc2b39de80985939ab469887
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454686
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparatory patch for specifying the transport
when calling the script. Better to use "rdma" across the
board instead of a mix of "rdma" and "RDMA".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If7170cff6ba2ec51e92a0423c0b24cc141054b55
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454685
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All of the checking for NVMF_FIRST_TARGET_IP, starting
the target, waiting on the target and modprobing
nvme-rdma is duplicated in every script. So move
a lot of this either to nvmftestinit() or a new
nvmfappstart() function in common.sh.
Also just kill the nvmf target in nvmftestfini, rather
than the script to explicitly kill it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5864404610a4244473f460d48264de92687ed867
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454678
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pull this parameter when sourcing common.sh
and set a RUN_IN_ISOLATION flag if it was specified.
This reduces the overall code a bit plus avoids having to
pass the "iso" parameter to nvmftestinit and nvmftestfini.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idbbe27bfb7b62857500176cdb5d90e381fce4ffc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454814
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's 3 functions that are only called from this compilation
unit.
Change-Id: I033ced4c19ee2a33b9537c347532ea5706d02d6a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous test cases got passed, is because all parameters
are filtered to be same accidentally, for example:
Previous, they are
event=bdev_register:66ab4189
ev_type=bdev_register:66ab4189
ev_ctx=bdev_register:66ab4189
ex_ev_type='bdev_register:[[:alnum:]-]+'
ex_ev_ctx='bdev_register:[[:alnum:]-]+'
But actually they should be:
event=bdev_register:66ab4189
ev_type=bdev_register
ev_ctx=66ab4189
ex_ev_type='bdev_register'
ex_ev_ctx='[[:alnum:]-]+'
Change-Id: I7a2dc801931f792a39fc2775d883679cf8185fd0
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently autotest prints the following at the start
of each run:
> grep: /[...]/output/timing.txt: No such file or directory
No harm is done and the file is created right after
the grep, but the message might be misleading. We get
rid of it now by ensuring the file always exists before
grepping it.
Change-Id: I271b68479a6fddcbe098c2657fd7c4dc39e6e50a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding ability to create targets from single bdev,
will allow to create set of targets (not all) to run tests.
Idea is for bdevio to no longer run tests on all bdevs and
shutdown right after. Rather await RPC for configuring bdevs
then start test suite on select targets via RPC.
This is first patch in that direction.
Change-Id: I8645a3c22150e8611ff8a59f740e2ebf4edb4c1f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tests shouldn't report success when no actual tests were ran.
Using bdevio without any bdevs configured, does not serve
any purpose and should report failure.
Change-Id: I489a0d03f5b5c2482dede56cad92befd97d24057
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unclear why they were here to begin with.
Change-Id: Ic9b896796a9c56552972e3ef8075934d4b3f6497
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No additional value in randomizing read vs write, which raid and
which channel. Still do read and write but fix the other values.
Change-Id: I5a4f023731119230d3eb49ae28421819144b90bc
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having a varying QD in unit test isn't adding any value, the same
code is being executed N times with no specific assertions on the
difference between queue depths. Qdepth testing will be looked at
in system test as an opportunity to increase SW quality.
Change-Id: I5328a43f57cbfa2afc9145c828b6e968dcab310d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For test setup only, each time a UT would run several params, like
the number of drives in the test, would be based on a random value
which is not optimal for UT. This patch just selects a reasonable
fixed values and uses them every time.
This can save up to 4 seconds per run depending on the values that
were randomly chosen (worst case) vs what is in this patch.
There is value in some read/write test cases in using different
strip sizes however. Enabling multiples values for the tests where
it adds value will come in following patches as will removal of
more random numbers like # of channels.
Change-Id: I1b9d44b70ae81af0dcf53ae4a56e31c9c9add39e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
General cleanup, first in a series of patches coming soon...
Change-Id: Ibed727559af22c6febb1aad2bb8320a765814144
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch allows multiple iovecs as argument in spdk_dif_generate_stream.
Subsequent patches will support DIF strip and insert in SPDK NVMe-TCP
target based on the patch series.
Change-Id: I1f3d6c5b9f924bb52525e1611db403846d087563
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As a subsequent effort, this patch changes the interface of
spdk_dif_generate_stream to accept SGL data buffer.
This patch allows only a single iove. The next patch will allow
multiple iovecs.
Change-Id: I56f901d73ca3b9da4b56c213ebafcd7706b1fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch allows multiple iovecs as argument of
spdk_dif_set_md_interleave_iovs.
Subsequent patches will support SGL data buffer in
spdk_dif_generate_stream too. UT code tests only
spdk_dif_set_md_interleave until then.
Change-Id: I7ac03a3c8f7bcd922af4f29b404ebf3acc4b89e5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently iSCSI target have used a single contiguous data buffer
both for read and write I/O. Hence spdk_dif_set_md_interleave_iovs
accepts a single contiguous data buffer and its size as arguments.
On the other hand, NVMe-TCP target recently has changed to use
SGL data buffer instead.
DIF strip and insert will be supported in NVMe-TCP target next,
and updating spdk_dif_set_md_interleave_iovs to accept SGL data
buffer will be helpful.
This patch changes the interface of spdk_dif_set_md_interleave_iovs,
but allows only a single iovec. The next patch will allow multiple
iovecs.
Change-Id: I31b09814f8ec920e463a5b1be8fb88cad7d277fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is now sourced by each of the individual test scripts.
Change-Id: I0b4982a96455fcb376310658c1f2ad90a1232379
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Follow the pattern that most of the other tests follow by
defining testdir and rootdir at the top, then sourcing
the common files.
Change-Id: I8f4374e91f20edc244e8e8bcf8f9df198b4509c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used in the automated tests. It's probably only
for manual testing. For manual testing we're moving to a model
where the test script can run with just the 'iso' option, so
let's drop this parameter to simplify.
Change-Id: Iaafd237bcd4185844e568e79828824bdaf31a25d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454093
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These scripts aren't tests - they're just shortcuts to be used from
the command line to run tests. But we're moving to a model where
users can run individual tests directly by passing in the 'iso' flag,
so these aren't useful any longer.
Change-Id: I0789a4d267c6ab0e111a6b2f4ffd3b6ce21d9638
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the pattern used in other tests.
Many of the tests use a COMMON_DIR defined up top.
Instead of changing where this points, because it's used
for multiple things, just change the places where it
is used to source common.sh. This is lower risk for now
until these are cleaned up later.
Change-Id: Ib38ea9fdc94118c6c406f86177bab21c4e1c98b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch changes UT so that bdev modules have async init.
It demonstrates issue with triggering assert in init path,
when bdev modules are reinitialized multiple times.
Change-Id: I9b2b16d8ac53bac6a929f6929ceedb70b250c500
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This change unifies the DIF library to use dif_sgl throughout.
Change-Id: I60addcf05e75b823e4dfb216122bf46edbc42e78
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The struct _iov_iter has been used to iterate the passed iovec array.
Subsequent patches will share the struct among iteration and
creation. To clarify this update, rename the struct _iov_iter to
_dif_sgl. The name sgl has been already adopted widely in SPDK.
Change-Id: Iab81bcb0658fbd0e39305e045c3d0aadba8fc55f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new added API can load file content into a data buffer, which
can be used to read configuration file as well as JSON file, and
we can add WRITE API in future which can be used to implement the
persistent reservation feature.
Change-Id: I9aaca7571648e1ab6dbfdd7cfd6ca34083cbeec2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
bc is currently used in iSCSI qos.sh test, but is not listed
as a pre-requisite in vm_setup.sh
Also it's a good alternative to using sed or awk for some
simple math operations.
Change-Id: I18742c0dedcdcc5eeebd310eb5760e226a163af7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Instead of linking to the real sock library in the unit tests,
link to a mocked up version like we do with the env.
Change-Id: I9607f135c6af86e09fa52badf44897f90ce94521
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test runs pretty quickly, so let's just enable
it per-patch.
While here, remove the commented aer test. We are
covering aer in other parts of SPDK autotest.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If0fb9814ed51c52dda58297c49266a7ad283dd85
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453908
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some QEMU bugs with resets for NVMe emulation.
It simply hasn't been tested for this test's very
stressful reset scenarios.
Since this test is failing the nightly builds fairly
regularly on VMs, just have this test print an
error message and exit 0 when it finds a QEMU SSD.
This will also allow us to enable this test per-patch
in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1013f1d84ab4d0e13f713fe99352b011d77dd1f8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the unit test of the public function nvme_request_check_timeout().
Change-Id: I6b51cc3985b1dd306fa85f3aee2be847e90d8807
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This cuts off about 10 seconds from this test on my
system.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iec889b2c304c44c1e3f6b130900d1a9f4d0fc575
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test intentionally generates lots of failed
requests - so disable logging for this test
application.
This should significantly reduce the number of
Jenkins java.io exceptions due to excessive logging
from this test.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I406e307575eeb82c103b7013b4feebfb2cf81864
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes sure we do some I/O after the reset.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5378df76fcd99ab9fed674550999c39d644069f5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will (finally) enable resets for fabrics
controllers.
Move some of the work previously done in enable_admin_queue
up to this new disconnect/connect logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6239f0c0f36192db921d33f2322b1874b9382a01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The RDMA transport was the only one implementing this
function, and it only does a connect - not a disconnect
followed by a connect.
A later patch will add a matching disconnect function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib68eb0ff2f8e59f437d6d8831bb37dfddf83e9a4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In working on a future patch to queue compress operations, I found
some corruptions in our mbuf pool stemming from an inconsistency
in using mbuf macros when constructing a compress operation and
how we allocated and freed both the pool and the mbufs.
This also fixes an issue that I hadn't addressed yet with freeing
chained mbufs. Use of the mbuf macro to free them instead of the
generic spdk functions takes care of that for us.
Change-Id: I7b29a0d740ab745574698c721d575d8a735ad5cb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
On init, we pass reducelib the address of our params structure
so that the volume size is updated accordingly. On load however,
there was nothing to set the volume size so any load of a previously
created compress volume would result in a 0 length bdev.
Change-Id: I7643c79fa2e664115fd25df064ff1c74d82e358b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to rely on lcore >= 0 for sessions that are
started (have their pollers running) and in order to
prevent data races, that lcore field had to be set from
the same thread that runs the pollers, directly after
registering/unregistering them. The lcore was always
set to spdk_env_get_current_core(), but we won't be able
to use an equivalent get_current_poll_group() function
after we switch to poll groups. We will have a poll group
object only inside spdk_vhost_session_send_event() that's
called from the DPDK rte_vhost thread.
In order to change the lcore field (or a poll group one)
from spdk_vhost_session_send_event(), we'll need a separate
field to maintain the started/stopped status that's only
going to be modified from the session's thread.
Change-Id: Idb09cae3c4715eebb20282aad203987b26be707b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the UT test case to cover below function:
spdk_iscsi_portal_grps_destroy()
Change-Id: I910b1066ff306039af8d4634122f894ffb3d66e1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453499
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replaced the unnamed unions with named ones. It makes the assignments
easier (it allows for direct assignment instead of having to choose the
correct union member).
Change-Id: I130233a096070092275a040e73cbaf36106ae1ab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our bash test scripts source autotest_common.sh
to be able to use some autotest-specific functions like
timing_enter(). The same test scripts allow specifying
custom command line parameters without actually realizing
that those parameters can be potentially picked up by
autotest_common.sh as well.
For example, if particular nvmf tests are run in "isolation"
mode by being executed with the first param set to "iso",
and there is a file named "iso" in the current dir, that
file will be sourced. This could be bad.
In this patch we stop sourcing or even processing $1 in
autotest_common.sh. Instead, the test configuration will
be sourced just once from autobuild.sh, autopackage.sh
and autotest.sh. If the user wants to run particular test
scripts manually, he should source an SPDK test configuration
by himself - manually as well. In most cases he won't even
have two, as only a few test scripts depend on SPDK_*
variables.
Note that we still have to setup the default values for
SPDK_* variables in autotest_common.sh because some of
our test scripts actually depend on them:
> if [ $SPDK_TEST_RBD -eq 1 ]; then ...
Because it lacks any type of quotes around SPDK_TEST_RBD,
it will print the following message when that variable
is unset:
> /bin/bash: line 0: [: -eq: unary operator expected
It doesn't trigger any error ($? == 0), but can be still
a bit misleading in the script output.
Change-Id: I350045d8582d66fe1ed7697d4bcbba324cb541ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our test scripts source autotest_common.sh at the
very top of the file, and - since autotest_common.sh
enables xtraces inside - the first thing we'll see in test
output are likely xtraces from sourcing the configuration
file and setting up $config_params. Even a simplest test
script will produce a ton of output this way, making the
entire output unreadable. This is especially annoying when
the test script is run manually, so we get rid of it now.
All the SPDK autotest options and $config_params will be
printed elsewhere anyway.
Change-Id: I6d9c8e8ba261b632ffbb7d6d26d84eb7ccfb2ed8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This way all the ./configure parameters are setup in one
place without any unrelated code in the middle.
Change-Id: I1cd8dc05e326b9ab3e8e51c193dd422fd8b5a00b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We use that variable only inside autotest_common.sh so far,
but hopefully that's going to change now. Our tests still
hardcode /var/tmp/spdk.sock everywhere at the moment.
Change-Id: Iad862cb7674a8108d2a07f35b5298d21e009c5a1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Put it all together at the top of the file so that
the file is less chaotic overall.
Change-Id: Ia92511e590692bbe31d0f626e9542374eaaab442
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_RUN_ASAN was only effective on Linux so far,
even though libasan is available on BSD as well.
Let's fix that.
Change-Id: I58a1796f736616882f797313e22055122b050b57
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453870
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This way we can consistently track when xtrace in our
scripts is enabled or disabled.
> [...]
> xtrace_disable
> PREV_BASH_OPTS=ehxBE
> set +x
> xtrace_enable
> [...]
Change-Id: I2e813dc2a237a4620ea72d26a22a3c8cbeb269f9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out `set -x` and +x to separate functions. Changing
xtraces is not so trivial and we'll be improving it later
on. We can't factor out the code as is due to local variables,
so we already simplify it a bit in this patch.
Change-Id: Iecbf5cedf821b7b1b71da933ceb158761881a843
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We added this a long time back when debugging some
multi-process failures. This adds a lot of output
to the log which isn't helpful anymore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d46b744f30b32fddedc3dae32f40c077717a1bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds support to spdkcli.py for raid devices via UIRaidBdev with
functionality to construct and destroy raid bdevs.
Information regarding the raid can be viewed via 'show_details' on a
given pooled_device child in the tree.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I2ca89e641b201c09b3d4db070eac6cc0c2cdec73
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test does resets which the nvme driver doesn't
really support yet for fabrics controllers. Some
recent patches accidentally broke resets for PCIe
controllers, and fixing that causes this test to
hang on fabrics controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5676130087a49555645b077f289bb40f6f27a43
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reduces some repeated code. I could have made both paths
call spdk_thread_exit(), but I want to add some stronger checks
around the tls_thread there eventually that wouldn't be valid
in the other path.
Change-Id: I61e1484536d8aef05f120d9ed394312b41f8445a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that SPDK_TEST_* default to 0, we can decidedly say
that if the requested test suite can't be run on your
system due to unmet dependencies (e.g. missing system pkg),
you will get an error.
Previously we would silently disable that test - e.g. when
someone ran with SPDK_TEST_RBD=1 but had no librbd system pkg
on his system, the SPDK autotest would return success without
running any RBD tests. That was very counter-intuitive.
We still silently disable a lot of tests inside our particular
test scripts. Hopefully we'll stop doing that eventually.
Change-Id: Ib400ba772c095b4d65fa8893a0669f3d8c3984e6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This tests a variety of bdev-related commands against
our NVMe-oF target. The key ones are write_zeroes
and nvme_passthrough which until now weren't being
tested at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8a5cfb2e41c2a7e8fd940b61b43a80c39993f9a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This paradigm has made it so much easier to test NVMe-oF locally. Extend
it to the iscsi tests as much as possible.
There are a few exceptions to the rule right now. Namely, the calsoft,
perf, pmem, and rpc tests which need to be slightly refactored before
they are ready for isolation running.
Change-Id: I3e92bd340c6a499dc77a56eb67bc7b074604746c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check whether ASAN is enabled up front, before entering the loop over all PCI devices.
Change-Id: Iede6a0466014745b77190b79fb8255e7b61bb260
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453512
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I'm guessing this happened during a refactor a while back, just
noticed it while looking at something else. We create a PT bdev
on a malloc bdev that was never created.
Change-Id: Idda7448b908c184f31be3ac1dd076f1cdf3397ed
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
bdev_raid.sh was using configuration file (bdev.conf.in)
made for blockdev.sh. Changes in that config file affected
the raid tests.
Since the test actually only used two malloc devices as
raid bases, switching to RPC makes it simpler clearer
to understand what is used in tests. Additionally
making raid tests standalone from blockdev.sh.
Fixes issue #777
Change-Id: Ia4c5858852241a9fd8212690aefbf015c98d1b57
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Previously the socket was only used in single rpc call,
upcoming patch will use of the $rpc_py.
Moving socket to $rpc_py simplifies calling it in multiple
parts of the script.
Change-Id: Id1ba86740237c32a6f0259562c0b5c11d917bbcf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We use python3 now, not python. This is important
because in next patch we will use a new 'aliases'
keyword argument in the argparse API that's only
available in Python 3.
While here, clean up some documentation that was
instructing users to call python explicitly instead
of just invoking scripts/rpc.py directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c11e131cd56f7c994aa8fe21b4b00ae33489fdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We've got a bunch of `if hash` checks that generate
unnecessary output, e.g.:
$ if ! hash ceph; then [...]
/var/jenkins/workspace/Other_systems/centos7_autotest/
spdk/test/common/autotest_common.sh: line 28: hash: ceph: not found
We now silence that output in cases where we do expect
the binary to be unavailable and handle that case, but
we hold off in cases where `if hash` is just a sanity
check (e.g. `hash sgdisk` in part_dev_by_gpt() which
can make the entire function return immediately and do
nothing).
Change-Id: I7cbfada858aa86d57cbe182ea7f9b222debc8b88
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This transport function is a complete nop now, so
remove it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cc6ac75795a3cf5311f24e2ac293fb53d4b9f8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453487
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to move more of the reset-related
functionality to the common layer, as part of enabling
resets for fabrics controllers.
The transport qpair_enable and qpair_fail functions
acted similarly - so those are both removed now and
replaced with this new qpair_abort_reqs function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9486630ad5b807239b0b5bcde50e8cfd313695d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The nvme_qpair_disable functions will be going away in
an upcoming patch, so move this one bit of functionality
into a helper function in advance.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61c2de535c2230b988d56dea13b00f39cb59dcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We submit AERs to all controllers - both pcie and
fabrics. But currently we only manually abort the
aers when disabling the qpair for pcie. Make this
common instead by creating a new transport function
for aborting aers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e926b61b8035488cdc6e8cb4336b373732f985e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This better explains what the function is doing,
and makes the name more general so we can use it
for the adminq as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b55761cb141a9a79cdef876be47995d8813b312
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This way we can track which machine runs OCF tests.
Change-Id: I51ad8f467965ae7051caac06b834a9db9f0b1a8d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This argument appears to be unused. I think it is a holdover from pre
dpdk submodule days.
Change-Id: I1f2084429dd9350730d7628af39db0b43dfdbd85
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453473
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
And change type name of callback as well. The new name is more accurate.
Change-Id: I13b63f7d33f60ecea7fdf6e50f57aa6a391a4562
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
NVMe-oF target doesn't support reset yet - but we want
to use bdevio to test other NVMe-oF target functionality
in the next patch.
An issue will be filed against the reset support so
that it gets added.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84b2be9268a344ee9e613a39487345dc1b8187bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This ensures the stub gets killed so that we can
make forward progress on collecting a backtrace.
This requires adding an optional parameter to the
kill_stub function to specify a signal.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib46d07b6651c6f35382f38c97901def03f28289d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will be used to help debug some intermittent
json_config test failures in the test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibe16f45c8916f726f0dd7aa3dc864543ed015aa9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reduces the number of directories significantly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2bb428962e1666bd3cee20fb566c7eb81195363a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
