The PCI device claim function does not need the whole spdk_pci_device
structure, just the address.
Change-Id: If59df512043ee062cf9f759bdc104fc522625ba8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe over Fabrics target was storing the PCI device pointer for each
direct-mode controller, but it only really needs the PCI address, which
is exposed via the get_nvmf_subsystems RPC.
Also update the same code path to use the new spdk_pci_device_get_addr()
function for brevity.
Change-Id: I0708b3331b7c279c1a86f0d7459b5deb40dd7c89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Split the part that gets a PCI device's address into its own function,
spdk_pci_device_get_addr(). This is useful outside of the comparison
function and is orthogonal to comparing addresses.
- Make the comparison function take two addresses instead of a device
and an address. The more general form will be useful with addresses
that are not directly associated with a device. Because of this, also
rename the function from spdk_pci_device_compare_addr() to
spdk_pci_addr_compare().
- Return a signed value similar to strcmp() so that addresses can be
ordered, not just compared for equality.
Change-Id: Idf304454af09ea57f1e1d5dc3a39b077378cecad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename the construct_rbd_bdev "size" parameter to block_size so that it
is consistent with other bdev construct RPCs.
Change-Id: I88f8ed35444495ffce9550dc224fbcbd58231787
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When creating a bdev via the RPC interface, there was no way to know
what name it was assigned (other than predicting it based on the
numbering scheme). Change all of the relevant RPC interfaces to return
an array of bdev names so they can be used to construct LUNs/subsystems
dynamically in scripts.
Change-Id: I8e03349bdc81afd3d69247396a20df5fcf050f40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Specify SPDK_JSON_WRITE_FLAG_FORMATTED when creating a write context to
output more human-readable JSON.
Change-Id: Ie1f0451496aae7e36e4cdb1f05edb4bc4963be17
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the RDMA transport failed to initialize, g_rdma.event_channel may be
NULL.
Change-Id: I4510ee5893389f244f0fbaa1cd4a182868939b25
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For iWARP devices, buffers that are intended to be the
target of an RDMA read initiated by the target must additionally
have IBV_ACCESS_REMOTE_WRITE permission. This is because iWARP's
RDMA read path essentially requests the remote side to do
an RDMA write.
This is unfortunate because there is no way to differentiate between
memory that the remote side can do an RDMA write to and memory
that will only be the target of RDMA reads initiated by the
target. There is nothing we can do about this serious deficiency in
the specification, however, so we have to live with it.
Change-Id: I3d2f2814ce0cb1df4e5347296ef371db4d16be21
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for spdk_bdev_readv in scsi layer.
It also fixes write so that it uses multiple iov's instead of one.
Currently we should use only task->iov (for single vector operation)
or task->iovs (for multiple vector operations).
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia3b2f6d18fd212b11d7b63b11dc46ec5bbc74788
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes reduntant field in spdk_scsi_task and
fixes all logic to use iov.iov_base
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ie2fa1e2357b6383c118d05aec9206d1c60537d40
Previously, if spdk_rpc_setup() returned early due to the RPC service
being disabled in the configuration file, it would leave itself
registered as a poller and continue to run for the life of the app.
Change-Id: I0532fe23a732b87d68f83847b2db7627f87e9a1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
I believe this is required for NICs to report, but handle
the case where it isn't reported.
Change-Id: I38d10c3590d1df8bb902ab312af0f9e01b9e5032
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This makes it consistent with the way connections and
requests work.
Change-Id: Ifb97499ba72f7dfd02ac54ba1b622726d266262c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The shared memory pool for a session is associated with
a particular RNIC via the protection domain. New connections
attempting to join a session that came in on a different RNIC
can't use that memory, so must be rejected.
Change-Id: Ibd79fe90566a231f76b7472e5e9b484c3e528454
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Rearrange the functions in rdma.c to match the order
of the function pointers in the transport. No other
code changes.
Change-Id: I9dbc68912ecd5dfdf53f20b4807d4116933a3c3a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the lower level registration functions. The RDMA-CM
examples use the ibv_* versions, so who knows if the
rdma_reg_* wrappers are even well tested.
Change-Id: I8e8250ab09a1401e636aebe2fc04a60806f7a827
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we mixed use free and spdk_nvmf_rdma_conn_destroy to
free allocated spdk_nvmf_rdma_conn structure, which sounds not
exactly free all the resources.
Change-Id: I2917b442c34d63ba5c014add58f429ae4b831595
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The RDMA API doesn't say whether the wr is copied, so be
safe and allocate it on the heap.
Change-Id: I091af50aa031e1861333f19d864eb52335d6b756
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we directly assigned the pointer of pool_name
and rbd_name, and this is not safe. After the rpc test,
we found the string value is not correct, so use strdup.
Change-Id: Ibadc57d3cb5b9869b7db5a22c2459769e92edebd
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Four read/write functions share the same code for checking
IO len and offset. Extract this code into separate function.
Change-Id: I40f0021e70a60c591b048ad3a70b22eaa07af3b4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Only call spdk_bdev_io_complete() where IO error is seen.
Change-Id: I829e4c589dbcb47017e810035837a4c61c3428f9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For large writes that require multiple SCSI tasks (one for immediate
data, then one or more for R2T-solicited data), we bump the refcount
for the task associated with the initial immediate data PDU, to
ensure it does not get freed until all of the child tasks are
completed. But in some cases this initial immediate data PDU could
complete after all of the R2T-soliciated data PDUs. The
completion code was not handling this case correctly which would
result in the iSCSI connection thinking it still had outstanding
SCSI tasks when the connection closed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f9c5322755462d1918fde0075c87c84295cb10c
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Make sure the function reentrant, prepare for rpc method.
Change-Id: Ie5230e4ac6c9a750e8e779c5e0b67134729c07e3
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This prepares for future scatter-gather support.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie21c4d86c1e932dcaf63cf13d7a7198890595d79
Return void in main I/O path, and have functions
explicitly complete the I/O back to the bdev layer
if any failures are encountered.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia729b0af555f87c2fb36b92e79a47d19a325de7a
Add public function which could be used by rpc method.
Change-Id: Id9d2938801e0acdf0f9827ef2990a54c75aec22a
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This patch removes the lock in RBD module. And it requires
the librbd library supports rbd_poll_io_events function.
Change-Id: I040a7d8369ab4f69f41d1d0233115f885168f019
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch makes lun_name:lun_id pair as one object,
the same for the pg_tag:ig_tag.
Change-Id: Ib08450d12bde9b8388d4ae41e214cc0ba64c8b1e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
Use standard GCC style atomic operations instead of
the DPDK calls. The DPDK calls end up translating
to the gcc standard inline calls in the generic
case anyway.
Change-Id: I0ea760c4e23c3660b082a803bbc174de7250f365
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was only used for debugging. Everywhere else
used the spdk_memzone abstraction.
Change-Id: I8a828ea3c7abccb66c8a027cb13de43c560ff7a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the type from int to bool and change the name
from data_ref to data_from_mempool.
Change-Id: If1fc11761e63561443ed44d6a0860e416e424df8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This is required since pollers are now directly removed
(rather than scheduling an event) when the unregister call
is made on the poller's lcore.
Without this change, if a poller is registered then
immediately unregistered, the unregistration will seg
fault since the event adding the poller has not executed
yet.
Also add a test case that exhibits the sequence of events
described in this commit message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6ba0ee224ac1f8f3ebb8e7571714e718bd42db
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: I5f401527c2717011ecc21116363bbb722e804112
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
'virtual' is a keyword in C++, so avoid using it in variable
and structure names in case any files are eventually
included from a C++ project.
Change-Id: I2122750445def63038af68a3000758e33b937f9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
All completion queues for the same listen address
now share a common completion queue channel.
Change-Id: I42c149fe7e221951e8a3826b1713482c37a265b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These 4 callbacks can be condensed into two callbacks, which
simplifies the API.
Change-Id: I069da00de34b252753cdc8961439e13a75d1cc68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Validate the number of unmap descriptors in the generic bdev layer
before calling the blockdev-specific unmap function.
Change-Id: Ib24e7ec63f782f23f2ee3e63393aa8463123fdb4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All timers have been converted to SPDK pollers.
If an app requires rte_timer support, it should register its own poller
that calls rte_timer_manage().
Change-Id: I8a827a357b344deac76d42357a5a84ac2daabbf8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The new env library will wrap all third-party library
calls and be easily swappable with alternate implementations
at build time. For now, it's just the memory library
renamed.
Change-Id: I26a70933289f8137107208ba75f7520fd7a33da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Increased printed data width, added data offset indices.
Change-Id: I44f81396e33870109c2bece5e152657f8a24a56a
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Preparation for SGL support (readv/writev).
Change-Id: I14a116d764ebc582ea0a0077cc5a0d0bac638cb0
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Provide a convenience wrapper for general purpose dataset
management commands. The previous wrapper for deallocate
was difficult to use correctly and only for deallocate.
Note that the name is "dataset_management" as opposed to
"data_set_management" to match the NVMe specification.
It's questionable whether "dataset" is valid English, but
it is best to match the specification.
Change-Id: Ifc03d66dbabeabe8146968cf8a09f7ac3446ad68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Namespaces can be allocated but inactive, which causes
the identify namespace command to fail. Handle this
case so that attaching to the controller does not fail.
Change-Id: I9d692f8e7841a9315a737b0a5e44d9b4e4484a13
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Modify the spdk_poller_unregister() function so that it works correctly
when unregistering a poller from its own callback function.
Change-Id: I57fa5ebd8a8bad522e34f597b406a4726f1b76ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch will add a new bdev module, rbd.
It can make ceph rbd as the backend of iSCSI
target.
Change-Id: Id5eb3b159ee607052e3c33a2e59d721739fd9977
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
These offsets are passed to the bdev I/O functions, which take uint64_t
offsets.
Change-Id: I1d597d066dfb64b6c7658906e7ee8e6fb2f8e4db
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The offset variable is used to store the result of a uint64_t * uint32_t
multiplication; a signed integer is not the correct type for the result.
Change-Id: If1fb22314ba7e3cec91808cc051678f809c9e58b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This code calculates the difference between two pointers and then stores
it in an off_t, which is intended for file offsets.
In this particular case, the offset will never be large enough to
overflow off_t, but use the correct ptrdiff_t type anyway.
Change-Id: I6b159bf0286a7f5962d08b9894538f4d99c8647b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
off_t is problematic for use as a file/block offset: it is signed, and
on 32-bit platforms, it can be 32 bits (depending on the settings of
_FILE_OFFSET_BITS and _LARGEFILE_SOURCE).
The blockdev layer already uses uint64_t to represent offsets; replace
the blockdev module uses of off_t in internal functions with uint64_t
to match.
Change-Id: I77a2e594572c56f1cd8a7a080f985ea5b27c35f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The free function is missed for dev in spdk_io_device_
unregister function.
Change-Id: Id212344dfcde2ae4780c631e3443f530ef25cfd1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
For process_read-task_completion, add a
new paramter and remove the duplicated code
since this function is the critical path
Change-Id: I6a56327def717ee965c701383f01d6745a8c6988
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This feature should only be used if clients are coordinating
with one another.
Change-Id: I89a437441a7e3fbcc1e5f6efa1c8e970ade7c2ec
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Some subsystems may wish to create unique I/O channels
which are not shared across all users of the same I/O
device on the same thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ade3675d57338cf85b6a301285e6f392bd6cd2e
We need to return -1, when there is still tasks. From the
usage, return 1 is wrong.
Change-Id: Ibf1b53e0be92818c73590c0b4211d34332073c74
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Fix the existing cases (all missing void in parameter lists) and enable
the warning to prevent new ones from being introduced.
Change-Id: Ieaf00b3dfd5daf1e21fcbefb124514882e8996c9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch aimed at avoid run out of large rbuf for read commands
Change-Id: Ibc42b2216e929f8dfa59cba1b32ae8d52a1a345e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
I/O channels are not actually used for I/O yet however.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa3774ecacc7ec206c7c0c66e6b2f2d10c8fa785
This will start testing the I/O channel allocation paths. I/O channels
are not actually used for submitting I/O yet however.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I901402633248170324db1e2fc8fb813f7629c2b0
This will help catch any cases where I/O channels are not
released during shutdown.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96cf93218026b9ef319abcf0662fe258bf75174d
Also implement these functions for all of the bdev drivers in
the tree.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idea97743d601150044b1fe2d9d76e922d46d3ee1
This patch adds a basic framework for creating I/O channels
for I/O devices. An spdk_io_channel represents a one-to-one
mapping between a calling thread (represented by spdk_thread)
and an I/O device that the thread will perform I/O operations
on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I658ab7f995cc962f4e2a204e058cdd3ad3fd735d
Change the return type from void to int so that the result of
spdk_subsystem_fini() can be reported.
Change-Id: I811c25513e41573ca0c9cb111512d7705d107f66
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of polling for only 1 completion at at time,
poll for batches of 32.
Change-Id: I5ef99a270489e7b3d2a58cb765915f187775a93e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To make the function definition style consistent
Change-Id: I7ade943881aa5076fdd419958e386ae3c3661da6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
SPDK_NOTICELOG() can already do printf()-style formatting, so there is
no need to use snprintf() on a temporary buffer first.
Change-Id: Iffb5369b74f27fb2c4b3ac07ea0cdeab52258ba1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch aimed at avoid run out of large rbuf for read commands.
Change-Id: If10f45292da5d5a26c2e338f1ddeafccedb88a4c
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
There are some error paths that can get to spdk_iscsi_conn_stop_poller()
before the conn's session is set. So check whether the session is NULL
before trying to check its session type.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I352a2aa513541ba630ace368137433e509700e32
