We can merge two loops of req->buffers and req->iov into a single
loop and merge two variables, req->num_buffers and req->iovcnt into
a single variable. For the latter, use req->iovcnt because it is
also used for in-capsule data.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia164f2054b98bbcb00308791774e3ffa4fc70baf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This follows the good practice of FC transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I84a6bb28a27b529335f100c8cab12d642bc156ff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469488
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is the end of the effort to unify buffer allocation
among NVMe-oF transports.
This patch aggregates multiple calls of spdk_nvmf_request_get_buffers()
into a single spdk_nvmf_request_get_buffers_multi().
As a side effect, we can move zeroing req->iovcnt into
spdk_nvmf_request_get_buffers() and spdk_nvmf_request_get_buffers_multi()
and do it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I728bd330a1f533019957d58e06831a79fc17e382
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is close to the end of the effort to unify buffer allocation
among NVMe-oF transports.
Merge each transport's fill_buffers() into common
spdk_nvmf_request_get_buffers() of the generic NVMe-oF transport.
One noticeable change is to set req->data_from_pool to true not in
each specific transport but in the generic transport.
The next patch will add spdk_nvmf_request_get_multi_buffers() for
multi SGL case of RDMA transport.
This relatively long patch series is a preparation to support
zcopy APIs in NVMe-oF target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icb04e3a1fa4f5a360b1b26d2ab7c67606ca7c9a0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Small cleanup in prep for future RAID levels and to improve
readability.
Change-Id: I66ae64320593ee5b242ccdc50a0041a4ec8207fb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9fb7a998f7c13ce53cba630a895e8e11cf5f4a1c
Signed-off-by: Benjamin Saunders <bsaunders@google.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467559
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The subsequent patches unifies getting buffers, filling iovecs, and
filling WRs in a single API. This is a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I077c4ea8957dcb3c7e4f4181f18b04b343e9927d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This patch makes multi SGL case possible to call spdk_nvmf_request_get_buffers()
per WR.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I977ebb0c6b2a67218c9b6fc20dc26a93a6ec770b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This patch makes multi SGL case possible to call spdk_nvmf_request_get_buffers()
per WR.
This patch has an unrelated fix to clear req->iovcnt in
reset_nvmf_rdma_request() in UT. We can do the fix in a separate patch
but include it in this patch because it is very small.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6e5af0505fb199c95ef5d0522b579242a7cef29
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update transaction length wrt to medata size
Change buffers handling in the case of enabled DIF - add function nvmf_rdma_fill_buffer_with_md_interleave to split SGL into several parts with metadata blocks between them in order to perform RDMA operation with appropriate offsets
Add DIF generation before executing bdev IO operation
Add parsing of DifInsertOrStrip config parameter.
Since there is a limitation on the number of entries in SG list (16), the current approach has a limitation on the max transaction size which depends on the data block size. E.g. if data block size is 512 bytes then the maximum transaction size will be 512 * 16 = 8192 bytes.
In adiition, the size of IO buffer (IOUnitSize conf param) must be aligned to metadata size for better perfromance since metadata is treated as part of this buffer. E.g. if the initiator uses transaction size = 4096, data block size on nvme disk is 512 then IO buffer size should be aligned to (512 + 8) which is 4160. In other case an extra IO buffer will be consumed which will increase the number of entries in SGL and in iov.
Change-Id: I7ad2270fe9dcceb114ece34675eac44e5783a0d5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Test all 3 IOV positions but only on src bufs as the dst buf
code under test is identifal and the amount of test code is
rather large.
Change-Id: Idbb635149a5737df9d508adc9dba69e84ec024d3
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To make next patch in this series clearer
Change-Id: I6654a92309b4b98351e3793439ecff1b10a24863
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
By moving the success test case to the end we avoid the scan-build
issue however the last test case was already testing success so just
udpated the comment and free the memory at the end.
Fixes issue #933
Change-Id: I0ca81f240d3af32c414b0c886fda5b14ba37e490
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467302
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_pci_device_claim() could create a file on the
filesystem that couldn't be deleted programatically.
It could only be overwritten - e.g. by another spdk
instance - but this didn't really work if that
another instance had less privileges and hence no
access to the previous file.
This is exactly the case we're seeing on our CI when
running SPDK as non-root. In general it's a good idea
not to leave any leftover files, so now we'll delete
the pci claim file when the spdk process exits.
spdk_pci_device_claim() used to return a file descriptor
that could be simply closed to "un-claim" the device.
It'll now return only a return code. The fd will be
stored inside spdk_pci_device and will be closed either
when user calls the newly introduced spdk_pci_device_unclaim(),
or when the device is detached.
We'll still need to clean up those files somewhere in
our test scripts (probably ./setup.sh cleanup) to
clean up after crashed processes or so - but we don't
necessarily want to run such scripts inside the autotest
whenever a non-root spdk is about to be started.
Change-Id: I797e079417bb56491013cc5b92f0f0d14f451d18
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Prepare for the further optimization work
to use one bigger buffer to read more data for
reducing system calls.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie92603b09308bd3149263269fdec355b67251b37
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These aren't used anymore.
Change-Id: I91400f1ad8a620d84f1b7478ffa551bb1755d233
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
These were removed from the nvmf target, so the stubs aren't
needed.
Change-Id: I77b783019ee842c15d92b89cdffcb342b10d92c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The calls were removed from the code, so we don't need
the stubs anymore.
Change-Id: Ie3616d186ab172c3b7a6223b4ff754308fad9dc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It is a very rare thing for a buffer to be split over two memory
regions. In fact, it is only possible in dpdk versions where
--match-allocations is not passed as a startup parameter to dpdk but
dynamic memory allocation is enabled.
By adding a small helper function, we avoid failing an I/O because it
was assigned one of these improperly aligned buffers. Also, we try to
remove the buffer from circulation so that it doesn't get picked up
again by another request.
Also, add a unit test to catch this case.
Change-Id: Ia09865c2f77160a960571665b29c4533b11758ae
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In prep for replacing some of the internal r/w calls with function
pointers based on RAID level, just call spdk_bdev_io_get_buf()
directly in the submit path for reads. This:
* will reduce the number of places where unique calls to the
upcoming function pointer will be
* bring it in line with how the majority of other bdev modules look
* actually increase UT coverage by about 10% as we're now calling
spdk_bdev_io_get_buf() and it's callback.
Change-Id: I7e6da0dab80687988ba52f57b0d9e2dbf20676dc
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467538
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The dependencies between vhost and rte_vhost were not added during
earlier changes. This change moves the rte_vhost directory up to the
level of the other libraries and adds the proper dependencies for when
it is linked.
Change-Id: I089de1cd945062b64975a0011887700c0e38bb0f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removing queuing tests as they are really only testing mocked functions,
minimal coverage is gained here and the queueing logic from a UT
perspective is part of bdev, not a bdev module.
This is a prelude to adding RAID 1E which will start with abstracting the
RAID r/w functions and it may not look like it now, but getting rid of
this UT code will make the move to function pointers for r/w based on
RAID level a bit smoother.
Change-Id: I01eef2aa99b2bdd4308ddef9bad9dd1121ef7470
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467537
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For in each loop, encoding with Arm NEON deals with 48 bytes and decoding
deals with 64 bytes:
encode: add test with src_len=48 and more than 48;
decode: add test with src_len=64 and more than 64.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ie156d147165a2511eed03d212eb78300e0edc84c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove them all at once. spdk_ prefix should be
only applied to publicly exported functions.
Change-Id: Ib6d2bd0954ec5cb7c8cf253d79b9d3cd8aa0eeef
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This unifies buffer management among transports further and is a
preparation to make buffer allocation asynchronous.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c588eeac4081f50fe32605feb7352f72c628d95
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466847
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both RDMA and TCP transport have uesd group for such case. Hence
FC transport changes to use group instead of tp_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4b401179da506bb204c3ec48650db87f91fe72a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466843
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to nvmf_poll_group is set in nvmf_transport_poll_group_create()
after returning nvmf_fc_poll_group_create(). Hence holding it into
struct spdk_nvmf_fc_poll_group is duplicated and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7087c5cdb94b0b0c5f51b0b63b631c08266c90d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466842
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rgroup and TCP transport have used tgroup
for such case. Hence FC transport changes to use fgroup instead of
fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I91b7ad6a1c6e45caf92801b0635b18d48b3c9810
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466841
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keeping a global discovery log page was meant to be a time saving
mechanism, but in the current implementation, it doesn't work properly,
and can cause undesirable behavior and potential crashes. There are two
main problems with keeping a global log page.
1. Admin qpairs can be assigned to any SPDK thread. This means that when
multiple initiators connect to the host and request the discovery log,
they can both be running through the spdk_nvmf_ctrlr_get_log_page
function at the same time. In the event that the discovery generation
counter is incremented while these accesses are occurring, it can cause
one or both of the threads to update the log at the same time. This
results in both logs trying to free the old log page (double free) and
set their log as the new one (possible memory leak).
2. The second problem is that each host is supposed to get a unique
discovery log based on the subsystems to which they have access.
Currently the code relies on whether the discovery log page offset in
the request is equal to 0 to determine if it should load a new discovery
log page or use the cached one. This is inherently faulty because it
relies on initiator provided value to determine what information to
provide from the log page. An initiator could easily send a discovery
request with an offset greater than 0 on purpose to procure most of a
log page provided to another host.
Overall, I think it's safest to not cache the log page at all anymore
and rely on a thread local fresh log page each time.
Reported-by: Curt Bruns <curt.e.bruns@intel.com>
Change-Id: Ib048e26f139927d888fed7019e0deec346359582
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466839
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a small performance optimization and an effort to unify
I/O buffer management further among transports.
It is ensured that the request is the first of STAILQ when
spdk_nvmf_tcp_send_c2h_data() is called or the case
TCP_REQUEST_STATE_NEED_BUFFER is executed in spdk_nvmf_tcp_req_process().
Hence change TAILQ_REMOVE to STAILQ_REMOVE_HEAD for these two cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0b195874ac22a8d5ecfb283a9865d2615b7d5912
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not any different from the test_env version in this patch but it will
be in the upcomiong series as the 2MB tests are added as we will need
to manipulate the size param.
Change-Id: I13a7544546b5296421fe5b696c8777e402bacc35
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Most of the assignments followed the DIRS-($(CONFIG_X)) pattern, but
there were a couple of assignments using a different pattern.
Change-Id: I7c80fec2813c32cb7676912d72805565f77b2e3d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_tcp_request_free_buffers() and
spdk_nvmf_tcp_request_get_buffers().
Set tcp_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I286b48149530c93784a4865b7215b5a33a4dd3c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_rdma_request_free_buffers() and
nvmf_rdma_request_get_buffers().
Set rdma_req->data_from_pool to false after
spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fc4c261c3197c8299761655bf3138eebcea3bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a prepration to unify buffer management among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b1c208207ae3679619239db4e6e9a77b33291d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to unify buffer management among transports.
struct spdk_nvmf_request already has SPDK_NVMF_MAX_SGL_ENTRIES (16) * 2
iovecs. Hence incresing the number of buffers twice will be no problem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb525abbf35dc9f4b8547b785b5dfa77d106d8c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Purpose: Prepare the further optimnization in the
target side whening receving pdu headers, we expect
to use zero copy.
Change-Id: Iae7f9106844736d7160d39d0af1f5941084422ec
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Some time ago spdk_subsystem_init() used spdk_events as
callbacks, but it was removed.
This patch removes left over UT stubs.
Change-Id: Id25ac8e4e338c172d21161dede6dc046f0860279
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
