The 4 different RPC commands to create Virtio bdevs
have been unified to a single, yet another RPC command
in hopes the previous ones will be eventually removed.
That happened in 18.07 and now in order to remove the
old ones we mark them deprecated.
The unified RPC command was introduced in 18.07 and
has already replaced the old, separate RPCs in our
test scripts some time ago.
This patch also removes the old RPCs from doc/bdev.md
and while here, rephrases the Virtio section a bit to
make it more readable after some alphabetization
changes from the past.
jsonrpc.md already described the old RPCs as about to
be deprecated, so there are no changes required in
there.
Change-Id: I77ebf2dde56b1f4a6e4090ed76de16a97310c1c5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This doesn't cause any visual changes on spdk.io,
but makes the entire file consistently follow the
same markdown best practices.
Change-Id: I31c84dfa8789c41363d1ea3372cc1e33caf7c248
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429907
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most to-do items in lib/bdev/iscsi/README have been
done a long time ago, leaving this file greatly outdated.
It is removed now and the iSCSI bdev description is
added to doc/bdev.md.
Since most of the to-do items have been done, this
patch also adds a CHANGELOG entry announcing that
iSCSI bdev is no longer in experimental state.
Change-Id: I186c9e1489547152655e1e036b27ab6bc17fcf11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is to add the description of QoS (IOPS and bandwidth)
rate limits usage guide.
Change-Id: Ib351d89ee08ec131caa6f0037937b0dd86cd7dc1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/429432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We have hairy configuration method. First configure script uses CONFIG,
environment and arguments to produce CONFIG.local and config.h then
makefile uses CONFIG, environment and CONFIG.local to produce config.h
again. First time config.h can't be generated reliably as config.h
target in Makefile is passing MAKEFLAGS and they are unknown at
configuration phase.
Lets remove this mess by producing final mk/config.mk file and get rid
of CONFIG.local. This will also generate full build configuration in one
file instead scattering them in CONFIG and CONFIG.local.
In next patch scripts/genconfig.py can be removed.
Change-Id: I5696813312edff7e493207f7aa8569234a365ec0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/426364
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch added the support of RPC method to enable,
adjust, disable the bandwidth rate limit on the bdev.
And it can work together with the existing IOPS rate limit.
The RPC method has been consolidated to support both IOPS
and bandwidth rate limits as below:
usage:
rpc.py set_bdev_qos_limit [-h]
[--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I9c03cd635280add01801a81c6a6c02f0cf85bee1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416511
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
User can use this optional parameter to get the information of specific
vhost controller.
Change-Id: I3911c6c7d4e7b75e82277d1e4690d5e40019aa06
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/425451
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There were some innacuracies in vagrant documentation,
such as typos, incorrect versions and incorrect names.
This commit fixes them.
Change-Id: Ibe01f24c43bc105a19b27b81cea771c6711af7c5
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/427023
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Patches to scripts/vagrant/ made vagrant documentation outdated.
Specifically, changes introduced
by commit e3a7138571
with changeid I8a34273361dd4233241326b0cd31189cf511f503
* added 'create_vbox.sh'
* removed 'env.sh'
* removed 'build.sh'
which affected documentation page and made some of its steps misleading.
This commit replaces 'VM configuration' and 'example' sections
in doc/vagrant.md.
Change-Id: I0d99c8f845552a0b13b7b2f3768df7b3cfae76c2
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/426415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added a user guide that shows how to use tracepoints to
trace inspect the behavior of an SPDK application.
Change-Id: Ibc2af2a2cbf0cd4a2a4600949cbe5e1cbe5c40cb
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/417292
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change refreshes some information about the kernel dependencies,
adds information about how to configure the target over RPC, and removes
the legacy .ini style configuration section.
Change-Id: I54710c5f8ddbac37c2e0a43178bbe54fe2b0ba40
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426395
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
You can take it or leave it. I read through looking for substantive
updates I could make and didn't find much. This guide appears to have
stayed pretty true to form.
Change-Id: I6f0e53d9bef4c7e6cea40ff6d6605127d0640a63
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426404
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initial patch left out example rpc commands to create/delete
Change-Id: I2e705b041bf7f6524625f88625234327a38bfc45
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/425872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is code movement only. The deprecated RPCs are
actually quite complicated and are making the RPC
file much larger than it needed to be. Move the old
code to a separate file until it is eventually removed.
Change-Id: I7c9bcdb0faa8496ef611d787dcc9a35c82dcc61a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425178
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new nvmf_subsystem_create RPC. The current RPC,
construct_nvmf_subsystem, is old and jumps through a lot
of hoops to maintain backward compatibility. Leave it in,
but create a new RPC as the main mechanism going forward.
Change-Id: Ia99cb5994a90579956136dac1800ed1fdce482dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425169
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This RPC does not work for a lot of bdev types. For
example, NVMe namespaces and virtio scsi LUNs are not
explicitly constructed by an RPC - they are indirectly
constructed by an RPC associated with an NVMe controller
or virtio-scsi controller.
While here, remove spdk_bdev_config_json. It was
only created to facilitate this get_bdevs_config RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I537166d8f91ab458bd2000859d74f7254bfc9c0a
Reviewed-on: https://review.gerrithub.io/424584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Update these information due to 'get_bdevs_iostat' has been
added more outputs from the following commits:
https://review.gerrithub.io/c/spdk/spdk/+/418117https://review.gerrithub.io/c/spdk/spdk/+/419031
Change-Id: Ic94b871dc1a737253aa843b7fb9fdf667419bf59
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/424365
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Since IOAT is disabled by default, that option can be removed from
any config file used in tests.
Change-Id: I681bd1eb6a8c81328ba580be75b418994ccd85e3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/423357
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is not used anywhere, and is not something we can
set over RPC. So make this a command-line only option
(as it should be).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2df862cdce2f17992d2324312d5c0e98b38a8acd
Reviewed-on: https://review.gerrithub.io/423930
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add optional column to the table of parameter of set_iscsi_options RPC.
Change-Id: I7e5d0af2ebe25c84340a12a49b6dc24d19b911e6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new RPC to get current authentication group configuration.
This patch is utilized in the next patch to support JSON config dump
for authentication group configuration.
Change-Id: I34be9e196f8e7a484bcd316da54f05d0f6ee0300
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous patches enabled users to configure CHAP secrets dynamically
by RPCs. Subsequent patches will enable users to load CHAP secrets
from JSON config file.
Loading CHAP secret file is done by default and this will conflict to
JSON config file.
Hence the path to CHAP secret file is required to specify in the config
file or JSON RPC set_iscsi_options explicitly after this patch.
Users who have used CHAP secret file are expected to specify it explicitly
and this will be no harm for them.
Besides, CHAP secret file is not oly for discovery sessions but also for
login to iSCSI targets. However there were wrong description to make user
misunderstand. Hence remove these wrong description in this patch too.
Change-Id: Ic4093cabc0c14b87e26baef4bba6b0d292e40c06
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, reorder some of the files alphabetically.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78d7e31e55d94ed4473fa7d3c96fa3fb8481444a
Reviewed-on: https://review.gerrithub.io/423752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Also fix the code to match the documentation.
--limit-coredump is the better name for this option.
Also add a very brief description of --tpoint-group-mask.
A lot more documentation is needed on this, and John
Kariuki has some in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6eef15a713c0dfc950d748b0275b3f1d60d303b3
Reviewed-on: https://review.gerrithub.io/423751
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add RPCs to add/delete a secret to/from an existing authentication group
dynamically.
Use mutex to ensure exclusive access to CHAP secrets.
Tries to use descriptive message in RPCs when error occurs.
Change-Id: I59650ae11a2fe675d03b90bbd4d2dc5b9c0160ed
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds new RPCs add/delete_iscsi_auth_group to add and
delete authentication group dynamically.
Mutex is added to ensure exclusive access to CHAP secrets.
Additionally provide descriptive message in RPC when error occurs.
Change-Id: Iaddfbdd5688ca7907d2c7d859835faa056deecd1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to https://tools.ietf.org/html/rfc3720, the
default value for the FirstBurstLength is 65536 bytes
while SPDK iSCSI target picks the smaller 8192 as the
default setting. This value is the communication for
the iSCSI initiator to send the unsolicited data and
instead of having a fixed setting here, expose it as a
user configurable parameter to fit the real use case,
especially for the data out iSCSI write.
Example of usage as following in the iSCSI.conf:
FirstBurstLength 8192
Change-Id: I71690c7c48aa0875f1f975c0ea935389de6d1e6d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/421142
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifff553ed70ce5aa8e7bdf6d8a8e9e9afb73e8a64
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/423497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In preparing to add crypto I noticed a few missing modules and
realized they were not in any specific order. Alphabetized them
and added passthru for now. Others can be added over time...
Change-Id: Id7832f264d0a2936cec3d4bb8ada412e8255b006
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/423180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An new RPC set_iscsi_target_node_auth enables users to configure CHAP
authentication for the target node dynamically.
New setting is used for new iSCSI sessions. For existing iSCSI sessions,
new setting is not used until user logout and login again.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I0bd40d92262d708c1f7de0effb208078bdf8cc41
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An new RPC set_iscsi_discovery_auth enables users to configure
CHAP authentication for discovery sessions dynamically.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I8883d5e054539cf6db091a5b79d0479e62119811
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current parameter names of `set_iscsi_options` and `get_iscsi_global_params`
RPC method for CHAP in discovery session may not be clear and long
compared with CHAP in login to target nodes.
This patch changes parameter names of `set_iscsi_options` and
`get_iscsi_global_params` RPC method for CHAP in discovery session
from no_discovery_auth, req_discovery_auth, req_discovery_auth_mutual,
and discovery_auth_group to disable_chap, require_chap, mutual_chap,
and chap_group, respectively.
Old parameters are still usable because decoder of them are not removed.
Change-Id: If3102f1233d57ee3cadfb733a6fc1fca14a0e972
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eliminates conflict with Doxygen auto-generated
"Modules" page.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I571839240405ec0dc952b6a4f7ed65baab4cc42c
Reviewed-on: https://review.gerrithub.io/423165
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Doxygen doesn't parse empty columns, making the whole
table look broken on spdk.io.
Change-Id: Ie2a2aa0d39dc17e7014a52abac5803f5952253b8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/423067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
'-s' option is usually associated with the memory size,
but our ioat/perf and nvme/perf use it for io size.
To keep those consistent:
'-s' option (io size) was be changed to '-o'
'-d' option (mem size) was be changed to '-s'
Change-Id: I97cef4c0a4e6e902277dd50dfb43bde420a6427e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fixed various misstatements, mentioned long params, and described
some parameters in more depth.
Change-Id: Id3b37e810c7b9f626b1f7e42ba72af99b8b574ae
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422537
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia9573342d95c6c56050a005425c96f936e762b72
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/422357
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This file was renamed from io_channel.h to thread.h
Change-Id: I793bd0f314f7889d3c95c73dab76fcb688779663
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421554
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is an important link for programmers.
Change-Id: Iae89da531b98f9e0fdadd7564de0f165cc96e2b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421552
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Add a brief section outlining what applications are available.
Also word-wrap and do some minor grammar corrections on the
rest of the text in the document.
Change-Id: I4a3064e7a47e09a28a7b998955768f54a8a9cf9a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The link titles were the names of the pages, but
those names were then changed.
Change-Id: If24711a941ca42db703e373eea56c6235bed6685
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421550
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id2982f649c879bc69023da928bb2219f0cd8d85c
Reviewed-on: https://review.gerrithub.io/420748
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I952bb8e00ef173fc42414e9c771700669f54921a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Information regarding decouple parent lvol bdev was missing
in documentation.
Change-Id: Ib1611efedc472cc37133a57aed41f6c2c0abbe1f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I50a525ac46ac011af81625fa0f095b1f3d981aba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I276efc2a42641749cefb30708d6f5c2e5e969fa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414890
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I16010ccae613d707aa7e4f34fc694c467a589fa7
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/418682
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some parts of documentation like parameters or CPU mask format are
common to all targets so add this common userguide page.
Change-Id: I17410abada008f1fde144a13b4bd938c23902b71
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/417718
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This method returns an object, not a bare boolean value.
Change-Id: I84d2d10fdf399e2d6b1999ad8ed6107f05e3f061
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418232
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RPCs for logical volumes will be added in the next patch.
Change-Id: I45958c8ea0733a3494953acc7ce04164457bff6b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I21139603dce30a242e49b2fcc8c4152613369f44
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/413255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: <tomaszx.kulasek@intel.com>
Change-Id: Ib3516b85a721363526deab14170da87a8d9232f1
Reviewed-on: https://review.gerrithub.io/415298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to use the $(Q) variable in this Makefile.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1f9c54fb8c995bdee9749683b409152472366cbc
Reviewed-on: https://review.gerrithub.io/415872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes removing use of lib/bdev/<module_name>
which confused Doxygen into thinking it was an xml/html tag.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iebfe84c1cbc59cd7a62e88dafbe1725d7c2a49da
Reviewed-on: https://review.gerrithub.io/415851
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This removes 90% of the warning messages when making
the documentation and will allow us to focus on the
real warnings that should be investigated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96729c414436f3a2835f1486b239ae2f0c7046ae
Reviewed-on: https://review.gerrithub.io/415826
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic1634d2682636c99946fe288f09d5977c37e44f1
Reviewed-on: https://review.gerrithub.io/415825
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This results in a much cleaner tree hierarchy in the
left navigation pane.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3c0f8b70398589f9dbc80609c96226c6f3bff8f
Reviewed-on: https://review.gerrithub.io/415085
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Replaced basic ASCII diagram with the complex SVG one.
Also removed slightly misleading vhost introduction
and replaced it with a doc/vhost_processing.md
reference, which does a better job at explaining vhost.
Vhost is a protocol intended to expose Virtio queues to
an external process. While Virtio queues are defined
by the Virtio protocol, it is still misleading to say
vhost devices use Virtio protocol to communicate. They
use Vhost-user protocol. Virtio shouldn't be mentioned
unless we talk about QEMU or guest VM.
Change-Id: I38ce4d3cc9e1c96339d9fa63b5e94019a17ccf9e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/414816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes more sense as a first class library.
Change-Id: Ibd5c578f8708bd8c7d83fe1629e97c9a3316b56b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
The default is still to retrieve the bdev UUID, but now the end user may
also specify their own UUID if desired when adding NVMe-oF target
namespaces via construct_nvmf_subsystem or nvmf_subsystem_add_ns.
Change-Id: I950eb84b9fdecbc2eae8ca39d9acd6acabe8d31d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414269
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move several programmer guides into the correct section.
The blobstore programmer's guide is already linked from the Programmer
Guides section above; remove it from General Information.
Also add a link to the logical volumes documentation and rename it to
remove the "Introduction", since this doesn't fit with the naming of
other similar chapters.
Change-Id: I1eed7d2588851d67c067a2bcd568b3b071816679
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413851
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Method "remove_vhost_scsi_dev" changes to "remove_vhost_scsi_target".
Change-Id: I1e368c7cf2b16accd3431100e384c1d868e04a47
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/413873
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1cac468c58d84ed03bb646b8485e92fdb533049e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/413254
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
All credits go to Tomasz.
Change-Id: I0664aad9abb87f9d04c243654f308c22f968cef2
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/412119
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new function and its RPC caller. By using it, we can
get the statistics of all the bdevs or the specified bdev.
Meanwhile, with this patch, the open source tool 'sysstat/iostat'
can support for SPDK. The 'iostat' tool can call this function to
get the statistics of all the SPDK managed devices via the rpc
interface.
Change-Id: I135a7bbd49d923014bdf93720f78dd5a588d7afa
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/393130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also updated the CHANGELOG.
Change-Id: I9040505f689aab51fc26ab47d5a10438e35f9fc4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408830
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I decided to use 'Virtio Block' as the title. Virtio
spec uses the same name alongside SCSI.
```
5 Device Types
[...]
5.2 Block Device
5.6 SCSI Host Device
```
Also added a CHANGELOG note.
Change-Id: Ie2eabd053213da776c78a8d938a621b42e6d5558
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408829
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first step toward fixing the behavior of the lvol bdev
module so that it handles spdk_bdev_unregister() correctly.
Currently, when an lvol bdev is unregistered, this causes the associated
lvol to be deleted; this isn't the desired behavior, since
spdk_bdev_unregister() is just meant to drop the currently-exposed bdev,
as in a hot-unplug event, not destroy the backing storage.
The current implementation of the new destroy_lvol_bdev method still
calls into the exsting (broken) spdk_bdev_unregister() path, but this at
least lets us fix the existing delete_bdev RPC callers that really
intended to destroy the lvol.
The next step is to make vbdev_lvol_destroy() call spdk_lvol_destroy()
instead of unregistering the bdev, which will require cleanup in the
generic lvol layer to remove the close_only flag.
Change-Id: Ic4cb51305d31f6d7366a82ba7bf7b19ebbcd3e9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408084
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unlimited I/O per second is equivalent to disabling QoS.
Change-Id: I03a489dd18b5d1a9a42f7853248911e97b7a211e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/408291
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib42a520b9ac2783c96dbe73d1f8b22a5ac9a5b74
Reviewed-on: https://review.gerrithub.io/407558
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds a new RPC method to configure QoS on bdev
at runtime.
For example:
set_bdev_qos_limit_iops Malloc0 20000 --> Enable QoS on this
block device with 20000 IOPS rate limiting.
Change-Id: I1ee8b313b769fb5a664820f4ba827e0230be4b5d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds compilation and installation of VPP.
Note that it removes one of VPP config files, that is
responsible for setting up hugepages. It is already done
with setup.sh script.
Parameters kernel.shmmax and vm.max_map_count were set
to low count and causing issues with hugepage total sizes
above 1GB.
Change-Id: Ic6c31f4192c654672e36c4131e34eb5b8aaac022
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/404144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is called max_namespaces in the JSON-RPC method, not MaxNamespaces.
Fixes: 5e98dfd126 ("nvmf: add capability to add namespaces dynamically during active connection")
Change-Id: Ide39d6d6c1c1e12bd9b2ec1d2e619af7213051d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I382e1ee5d55e65d22e273e2fa248f6b73cd5934b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The long-term plan is to use the JSON-based configuration format, but
for now, we need a config file section to be able to test a bdev module
in blockdev.sh.
Change-Id: I2a69f7172693ed6d4939a3b938747e2a1c62ff83
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405908
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
