Previously this UT was only checking the snapshot counts.
This was correct, but since the blobs in this tests are
clones of each other - it would make sense to check it as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id9dec7f0a292cbb52da8196bfc77679fc0f49d8b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will only support a vectored variant of
compare-and-write for now.
This does no locking for now. Ii will be added
in a separate patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5bd075c912de60090e19cf8fced19c4879fcc900
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475941
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can't allow overlapped locked ranges - otherwise
two different channels could be deadlocked.
So add a pending_locked_ranges to the bdev. When we
start a lock operation, check if the new range overlaps
one that's already locked. If so, put it on the pending
list. When an unlock operation completes, we will
check if any pending ranges can now be locked.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2e3113216a195887b954533495ff200df14fadc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Keep a mutex protected list of the active locked ranges
in the bdev itself. This is only accessed when a new
channel is created, so that it can be populated with
the currently locked ranges.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id68311b46ad4983b6bc9b0e1a8664d121a7e9f8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477871
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an io_locked TAILQ to each channel, which hold
IO that will write to a currently locked region.
Also add a new step to the locking process per channel.
Each channel needs to wait until all existing outstanding
writes to the newly locked range have been completed.
Only the channel that locked an LBA range may submit
write I/O to it. It must use the same cb_arg for the
write I/O as the cb_arg used when locking the LBA range.
This ensures that only the specific I/O operations needing
the lock will bypass the lock.
When a range is unlocked, we will just blindly try to
resubmit all IO in the io_locked tailq. This could be
made more efficient in the future, but we don't expect
this path to occur very often, so going for simplicity
in the first pass.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdc992144dfaffe7c05471a5b3c020cedd8cdfc3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478226
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds new internal APIs bdev_lock_lba_range and
bdev_unlock_lba_range. To start, these APIs will
manage dissemination of lock/unlock requests to all
existing channels for a given bdev. This does not
yet interact at all with any I/O sent to the channel.
Future patches will check new I/O to see if they
are trying to write to a range that is locked. Future
patches will also ensure we do not have overlapping
ranges active at once.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d5b1cc84b41a7adc2a3c5791c766bb77376581f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be used by upcoming patches for implementing
LBA range locks.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa4ad8dcc0d09ccf20d35f010fcae19dcc17abc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have added a lot of flags to this script over time to try and shorten
parts of it that take a long time or modify the way we make and
whatnot.
In the test framework today we really have two settings, we either want
to run the entire autobuild package with all the bells and whistles, or
we just want to make the code and get on with the rest of the tests. I
believe this change can save between 1 and 3 minutes on each of the
functional test suites.
Change-Id: I7519e8320aa16b57f09f633f866dc36cb494aa80
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This was disabled in configure because at one time there was an ISA-L
dependency break between the RBD libraries and our own submodule.
It seems that the dependency break was fixed a while ago, but the check
to not allow one to build with the other was never removed.
Unfortunately, I don't have the details on what that fix was.
Either way, this compilation works now.
Change-Id: Ic249791549dae36c7279114d67e77be94e842ddf
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479726
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
In patch fdc82d3 'vm_run $@' was changed to 'vm_run "$@"' but
arguments like 'vm_run "0 1"' should be passed as
'vm_run 0 1'.
Change-Id: I2a51a31fc0b0b55079963b11587be55d9bf86a87
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For deletion to actually deliver results, poll_threads()
has to be called.
g_bserrno came from previous API call, not delete itself.
This patch fixes it so that g_bserrno is from the delete itself.
Next patch in series adds checks for number of clones.
Having such checks in first place,
would allow to notice lack of poll_threads() here before.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3477f5c5b99106b70ee3d5706906a4dc94283180
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478975
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Met error "touch: cannot touch './timing.txt': No such file or
directory" when running vhost_test.sh. For the working directory
is removed in "vhost_kill 0", And then "timing_exit clean_vhost"
will fail to touch timing.txt in the removed directory.
Signed-off-by: richael zhuang <richael.zhuang@arm.com>
Change-Id: I2d0818b1228ebfd6767c258a0f4c1fbbfc728016
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reset core mask is 0x1 and stub core mask is 0xF.
Avoid to use core 0 both apps.
Fixes issue #1134.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Ic423ec03896e38cf748929e458922f73dd2a7241
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479771
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of using "!" use rpc_cmd && false to check
that command should fail but succeded
Change-Id: Ied564c13b96ea6d4a45aab1460b3323edd1d9554
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478328
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: Ia4c6ec7b245600bca895f7802fb7f68c8d0400e4
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479845
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: I9e0a569e9dfd0e8b8236c0840ce10b92362c4996
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479844
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: I09f671a9c6539cc259c297514b24978587c9b392
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch is part of name refactoring associated
with moving FTL to work with zone bdev API.
Change-Id: I09781323b2ee25dbcee61eecf95ce7eca703ab93
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
There is no need of tracking position of zone inside
band.
Change-Id: I1488f23ccfd1f7eee1bd85fdb7ef8ace08ffca40
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Parallel unit is not needed anymore in ftl_zone
structure.
Change-Id: Ie8d78e3ccf64db84aff19ad2ce11e662d4f3f724
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468345
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moving to zoned bdev API will not allow to setup
physical range of underlying device so we need to
remove such capabilities from ftl device.
Change-Id: Ia807a11e992a221fce906d4ab122a6c3b1391280
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467949
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
FTL library is consuming whole OCSSD device
so punit parameter is not needed for bdev ftl
configuration.
Change-Id: I56f62ea6d09b3157b70c02ccfffcd3cb07ba4597
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467950
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
FTL working on top of zoned bdev doesn't need
physical page address (PPA) anymore.
ftl_ppa was replaced with ftl_addr which represents
zoned device addressing schema.
Change-Id: Ied5750a7ab2f4ce42067ff3e69c1f26f85f5022a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467633
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Remove some Open Channel dependencies from ftl_ppa struct.
Change-Id: Ic088b84c56a928906c6c01c6ef74e69be6d0107f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479549
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ftl_ppa address do not need to expose group
information when FTL will move to zones API.
Change-Id: Iece1b32f9bcd8985260668c953089eb9951f13cc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
My previous patch enabling this to be called recursively didn't
take into account that a single call to xtrace_restore would
override multiple levels of xtrace_disable nesting. This change fixes
that.
fixes: 190b2245c5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2167ba460e68223c9426b3d71e9c17019f947924
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478959
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add struct spdk_bdevperf and include header of io_target_group list
in it, and then allocate its global instance g_bdevperf statically.
Rename g_head by groups for clarification.
The next patch will register g_bdevperf as SPDK IO device and
allocate io_target_group as context of the corresponding IO channel.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6755ce8cc05b00cbc0d5dc7983ec01fe3483f4cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove a parameter from bdevperf_fini() and rpc_perform_tests_cb()
and they refer g_run_rc directly. This is a preparation to the next
patch to avoid introducing any dynamically allocated context.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42f1c7e8bc662799b3fcbf2769139174bb527314
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478834
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't have ordering constraint between bdevperf_free_targets()
and sending RPC response. So extract bdevperf_free_targets() from
bdevperf_fini() and rpc_perform_tests_cb() and inline it into
bdevperf_test_done(). As a result of this change, bdevperf_fini()
calls just spdk_app_stop(), but is still necessary in the subsequent
patches. So keep bdevperf_fini().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie8ed2d04db754b8a265296932f73d3a602d1f90b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479373
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out test finish operation of command line invocation case and
RPC invocation case. Then apply the new funciton bdevperf_test_done()
to all calls bdevperf_fini() or rpc_perform_tests_cb().
The purpose of this refactoring is as follows:
- Consolidating finish operation improves code readability and
maintainability, and may enable further improvement in future.
- The next patch will consolidate bdevperf_free_targets() from
bdevperf_fini() and rpc_perform_tests_cb() into bdevperf_test_done().
This refactoring is a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I06801541e4c4ed28774debad56d901dbeb5a9193
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479372
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
io_target_group manages io_targets, and hence checking g_head
should be done earlier than checking g_target_count.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I112018d8f487b387ae5f4f444a342be2c8da167d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This function was ignored and a little different from others.
Add this to increase code coverage rate.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I35b51feb8894aca54a3b21436bc21ec12e37adf7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475814
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename stub_submit_request_aligned_buffer function
to stub_submit_request_get_buf and its callback function
to stub_submit_request_get_buf_cb.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie8cde43d30c5aa2d353bb33b023d5318948bee44
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478944
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The only reason the qpair ever uses the port is to get to
the device attributes so skip the middle man.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib14a97ceaa0c49176027d6c35c5cb2787a845cc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add nvme_uevent_ut.c to unittest, and test parse uevents.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Id8bb8336790ae5e031b357dc49163d86dfa1cd57
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475080
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
UT also added for the block aligned write and verification
of the written data.
Change-Id: I8751f437c71dd7f3a4556fee420460d6dffdd4e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478424
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the same handler for SIGINT and SIGTERM so that
the working thread can exit.
Change-Id: If1ce617ddd778e92bed6f95089c48caf841e256f
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468661
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
