To fix issue: 2719
In this case, if there is successfully configured job and continue_on_failure (-f)
parameter is set, it will continue to run for these jobs. Otherwise, it will just
stop.
Change-Id: Ia2940a9e1b5da63e50857da11ff7f811c7576e3e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also give an error log when the g_timeout_in_sec parameter
isn't set but g_abort is set.
Fix issue #2643.
Change-Id: Iafd9e94952319b89891e37bc6e9e0db6892ddd7d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The public interface of lib/accel is now include/spdk/accel.h
Change-Id: Id94f623a494eb1b524b060f4413f633073ea7466
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Fix issue: #2568
Related test case is also updated.
A summary of the handling as following:
--json (json file used) and -f (continue_on_failure is set), the test case will run until end
--json (json file used) and as long as there is 1 Bdev met IO error, the test case will end when error happened
-z (wait_for_tests is set, means by RPC perform_tests) and -f (continue_on_failure is set), the test case will run until ctrl-c is triggered and will not end when run time is over as we could send RPC (perform_tests) several times
-z (wait_for_tests is set, means by RPC perform_tests) and as long as there is 1 Bdev met IO error, the test case will end when error happened
Change-Id: I886fc5cbd836f3bc5db618e7143cd3a556ea5e7b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13490
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are two resources to construct.
One is the job configuration and the other is the job.
This patch is to properly rename the related functions.
Change-Id: Ie005ed75a558b3176b183f30ef5bfdb9bef30dc2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9854
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdevperf_shutdown_cb computed total time after the
bdevperf_test_done call. It's wrong. Let's get
g_shutdown_tsc delta when it is really needed.
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Change-Id: Ic4421305b16277af874008e293da8cb121c0244a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9598
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current implementation allows to run bdevperf with --wait-for-rpc and
without -z option. As the result several statistics pollers will be
registered. Let's add guardian to prevent this.
In the case of multiple test running guardian also will be helpful.
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Change-Id: I885f9dba6fa324fe4fbaba104d3058bf9f686c19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9613
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to fix issue #2130.
Change-Id: I017f130f6247d49128839e664929db6cad521002
Signed-off-by: Xin Huang <xin.huang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9372
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
When specifying -C for multithread mode, we calculate
a 'blocks_per_job' to tell each core what subset of
the bdev it should target with I/O. But this
blocks_per_job, and the config->length member that it
gets copied to, were ints. For devices with num
blocks > INT32_MAX, this can cause overflow if the
num blocks is also < UINT32_MAX (because then we end
up storing a negative value in the bdevperf's length
field).
For sequential workloads, it may take a long time until
it happens, but for random workloads it fails almost
immediately.
Fixes issue #2108.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c2b787ab5d3c6bfe12efd183ce86d4d95f9b6c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9231
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the -Z option has been specified bdevperf checks that the bdev
module supports ZCOPY.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I0bebad68090f48a1b1250afe4bc4c752c2061bfb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7352
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently this will only support a global setting
that must be set on the command line. We can make
it per-job later, but will require adding float
support to the conf library.
Tested by running bdevperf with some malloc
bdevs. Performance with low theta values (i.e. 0.2)
are almost identical to random w/o zipf. But
higher zipf values start to show better performance,
because we get more hits on data that is already
in the CPU cache.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I55b1587cdec2919973b488786d361042ca210606
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This eliminates the thread-local seed variable. But
we're also adding zipf distributions in an upcoming
patch, and we'll want to store that context in the
job rather than making it thread local.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If8079682e7d3da8f989ee6b880edc8d3fcb4fdd8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
spdk_thread_create() does not require unique thread
names, and we already print out the CPU mask for each
job. So there is no need to append the cpumask to the
thread name.
Removing it has the added advantage of not modifying
the job name specified by the user if they are using
a job config file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d75ea2bdc50061d7338ad41749e458efa62b48e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
We can make the output a bit more precise by putting
the Core Mask on the same line as the Thread Name.
Let's also use "Job Name" instead of "Thread Name"
since that more closely matches the user's intent.
We use a thread internally for each job, but user
specifies workloads in terms of jobs, not threads.
Finally let's get the Total values aligned
with the per-job values again - this seems to have
broken as part of commit d80b4f4.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I04fcd294b8f88374b11e09350aabf84beb2ae60e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
POSIX defines PRIx64 for printing 64-bit values in a portable way.
Replace references to %lx to remove the assumption about the size
of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I40374212baf64028f77f87c3a7f0373f6cdb1415
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6003
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
-A is equivalent to --pci-allowed, which recently
replaced -W/--pci-whitelist. But we missed adding
"A" to SPDK_APP_GETOPT_STRING, so -A was not actually
working.
Note that bdevperf was using -A to specify that timed
out I/O should be aborted. This patch changes it to
-X to avoid a conflict. It appears that something
broke with this option earlier this year though,
setting it has no actual effect. This should be
investigated separately from this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f1aaf0af4e82ba3d08e91e6f9046d485cf04549
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When dumping results, include the LBA range used for the thread.
Also, to help with debug of verification erros, no longer use
rand data but instead use the current LBA. This can provide
a clue on data mismatch as to what might be wrong.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia02c35cf61ff2763c4a241314766e0bc65d18886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
All of our Makefiles duplicate huge lists of libraries
in SPDK_LIB_LIST. We have a very precise and accurate
accounting of the library dependencies in
mk/spdk.lib_deps.mk which can be used to generate
the full list if the app specifies the modules and
subsystem libraries it wishes to link.
I did a first pass through all of the existing
Makefiles to take advantage of this new functionality.
There may be more optimizations we can make later but
don't want to hold up this patch for all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icdaf6f749a6908df2c2ce2db22631a4af4ff3a9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5553
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to support ABI compatability issue for spdk_app_opts.
Fixes#1484
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6fed777fa15b367f7c3706b8f218d86d56493906
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5330
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Extracting codes to a function, makes the more clear.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I49ae7b4f07ebacbeaf0c03941aeefc4657317e3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5304
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Using common out to usage and exit.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idec94789566603379e6b548fa0421ea9ccf82d5f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5289
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These codes are at the end of bdevperf_construct_jobs,
and they can be replaced by _bdevperf_construct_job_done.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I9bcae562a2a277f6131864ad2ea7b7f565135814
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5181
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Add a cast when comparing an enum to an integer value.
Add an explicit uint64_t cast to the definition of BLOCK_CNT to prevent
value truncation.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I093cffe7e79bc04eba012f4ffaf33062a642d062
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5137
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Prior to this patch the bdevperf application enabled using the zcopy API
by default. This means that on bdevs that don't natively support zcopy the
API emulates zero-copy by allocating a buffer. In my test environment, I
measured a 25% decrease in IOPS when zcopy was enabled. This patch changes
the default value so that zcopy is disabled by default. For bdevs that support
zcopy, use the -Z flag to enable using zcopy API.
Change-Id: Ib7e5c24f76eb16ffef038687daca58c0ffad1c1c
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Legacy INI configuration is being removed this release.
This patch removes one of its options and always uses the
SPDK_APP_DPDK_DEFAULT_CORE_MASK as default core mask.
That can only be overwriten by -m/--cpumask arguments in app.
In bdevperf there was no reason to set reactor_mask to NULL,
as that was then still using the defaults.
Meanwhile bdev_svc will now check if user provided different
string via command line args to know if it should
unaffinitize its thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id882f8d7dbdd07b7743bd5981c37daa888b7872a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have some RPCs defined in the bdev library itself,
others in a separate bdev_rpc library. There's no need
for the separate library - just move them all into the
bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I298eedb88924197e64eb315369efb10f402903a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The log_rpc library serves little (if any) use in
isolation. It makes more sense to just include
this code in the event library. The event library
already depends on and uses the log library, and it
is natural to just enable these RPCs directly in
that library instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie39b8598ce0c06729a13d188ce00da44a996accc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Originally, config->offset was defined as int type.
When the capacity of SSD is very large, such as 8T(P4510),
then bdev->blockcnt2 is 7814037168, config->offset is 3907018584.
At this time, it exceeds the maximum int range of 2147483647 and
becomes a negative number, resulting in core dumped.
Debug info:
config->filename is Nvme1n1.
make_cli_job_config offset is -387948712.
This should be:
config->filename is Nvme1n1.
make_cli_job_config offset is 3907018584.
Change-Id: Ia83d88cc4e56d6c97a6d3fc1a2593b6fc31655b2
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3818
Community-CI: Broadcom CI
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow to override job config filename from CLI.
Note that -T is required when using job config that has
missing filenames, but then it is optional if job config is not used.
Change-Id: I7d392ff2d0554524cfcb5072182ec806013083de
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some global argument and some code from verify_test_params()
could be removed.
Change-Id: I923f5f23fafd31ff48049bd16476f01c801bfbb8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3278
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Instead of calling bdevperf_construct_job() directly,
create a job_config instance that would express
the same semantics and then use
bdevperf_construct_config_jobs() to create and run actual jobs.
The goal is to unify methods and reduce code duplication.
Change-Id: I724e5788ea74868c9e9c8128d658e720d211f253
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3510
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameters allow for low cost refactoring
because with them we can simplify construct_multithread_jobs()
by creating instances of job_config during its invocation
and then handling those in construct_config_jobs().
Change-Id: I73057a9a65f58e48ac719f30e918d7a05ffc0f28
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Implement parsing of config file,
including overall format of sections/parameters (using lib/conf)
as well as filename, bs, iodepth and cpumask parameters (based on FIO).
Also implement creating jobs based on config file.
The only required parameter that is missing is 'rw'.
It will be added in a separatate patch because it requires quite
different code than for other parameters.
Duplications that this patch introduces with respect to legacy
code are addressed in following patches.
Change-Id: Ie19e55dc66369e795a97b53a4223beafa10d8fe8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Accept job thread as argument
in bdevperf_construct_job().
This will allow for using single thread for
multiple jobs, as it is in FIO if multiple filenames are specified.
Change-Id: I0b6aa69aae1e1bf099170d3d495e0a83f97a857b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
env_dpdk_get_mem_stats RPC has been requested to be
available in bdevperf.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I10aea634851e21018b223d7331b1bbeb7630a09c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3520
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
