Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0a9cd41f754f2d52a8caa936a7a7504b0091790d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There may be for_each operations outstanding on an
io_device when it is unregistered. Currently we just
return when this happens, not unregistering the
device but also not notifying the caller that this
happened (since it returns void, and the callback
function doesn't have a status parameter either).
We could just push this responsibility to the caller,
to never unregister an io_device if it knows it has
outstanding for_each calls waiting to complete. But
I think we can simplify this a lot by just handling
this inside of the thread library. Mark that the
device is pending registration, and unregister it
(on the original requesting thread!) when the
for_each count gets back to zero. Also don't
allow any new for_each operations either.
Note this requires a bit of refactoring on the
thread unit tests, since it is now possible to
unregister a device with outstanding for_each
operations.
Fixes issue #2631.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I978f2d99a25e65d2b7d71ce9b1926a79a6c94263
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13890
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This would allow for better control through the environment which
could be used by the CI.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Iaf94c82ccd7ce6851abb1ad4b7ebf76d686e3608
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13898
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Here "-m " is not used or related.
so remove it.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic8700bd0a262bb70b6116bbee86330eece5c03b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows e380263ba1 - all CI nodes have been updated to an image
which ships with that particular version of vfio-user QEMU.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2029f48014868366881790a4e258190e3f83b0d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13894
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Older compilers (e.g. 7.5 on ubuntu1804) are having issues under
v1.16 due to:
plugins/intel/intel-nvme.c:666:47: error: initializer element is not constant
static const int LATENCY_STATS_V4_BASE_VAL = (
Makefile:108: recipe for target 'plugins/intel/intel-nvme.o' failed
This was fixed by the following commit which is present in the v2.0
release:
e7309044f3
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7ebcf1b1fdb44500a21bcf3feceb07a722e8fc30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The reconnect timeout test case expects a socket READ error
to trigger the reconnect poller in bdev_nvme module, but
we use the `verify` IO workload to send IO requests which
may cause the client doesn't receive any error, because
it will send WRITE commands first.
Fix issue #2595.
Change-Id: Ibc6b534d157552cdb2b55a03c869e254ec4c462e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
the sizeof(g_vals) should be the num of array, not the num of bytes. see follow:
CU_ASSERT(spdk_json_parse(g_buf, sizeof(in) - 1, g_vals, sizeof(g_vals), &g_end, flags | SPDK_JSON_PARSE_FLAG_DECODE_IN_PLACE) == num_vals);
Fixes#2623
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I3b7994606284fe3464650337ecb0f723a627f7aa
Reported-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13841
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parameter `num_queues` for virtio_scsi PCI device means
maximum number of queues, it SHOULD include the `eventq`
and `controlq`, while for `vhost_user` RPC call, it means
the number of IO queues, so here we use it as `max_queues`
in lib/virtio and add the fixed number queues for `vhost_user`
SCSI device.
Also fix `vhost_fuzz` to get `num_queues` earlier than
negotiate the feature bits.
Change-Id: I41b3da5e4b4dc37127befd414226ea6eafcd9ad0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK has no control over how the interrupts work in the network stack.
SPDK can only group connections together based on their NAPI ID. So
remove this check from our tests. It's only going to result in
intermittent CI failures.
Change-Id: If8e6214b7d6c5aa4df99101612b98aa43d45b459
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are only called back-to-back and they're both configuring the
driver.
Change-Id: Icc07df1cf23d67954ac3621647b050d4c8c74e64
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
scope
Some of these names were hard to tell if they were common utilities or
ADQ test functions. Clarify the names.
Change-Id: If6998c3ea996ad6fef0a87a33c90d665c9accaa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also display the log when error happens.
Change-Id: I09040a2fee2379e7506701c7cb558f0d26a5de65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13805
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to create and use ibv_context and pd.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Id594fa1ccb2daf535b1aaaef0a397bda2ec98578
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13710
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case user sets --test-conf="" the pkgdep/git still forces
bpftrace installation under fedora35 and newer. Avoid this to
make sure user has a clear view on what's being installed (and
what not) in respect to defined cmdline arguments.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8b60fe9044d1ab593b3c1acaf1b40dde22acee2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13607
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test uses exisitng SPDK tests workflow for performing
series of tests for vfiouser subsystem on live QEMU instances.
For testing purposes it sends series of gRPC methods calls
that are serviced by the SMA and subsystems and then uses
the regular SPDK RPC interface to verify its effects on the application.
SSH connection to VM is used to verify that changes took place.
Signed-off-by: Milosz Linkiewicz <milosz.linkiewicz@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I38258c1a3f9ee3e457ef0426cdc6feff2f38d729
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1f6f8bbe5f64bd281536ff30761fb7cf4bd046fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13787
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5baeaae98db79649bbd96f9fbe5a6dcffdf5cfda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13786
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This attempts to fix builds under f35 where newer kernel requires
the https://review.spdk.io/gerrit/c/spdk/spdk/+/13404 patch to
be present in both the release and LTS build.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie2a70ae9cb9ca6d2d495ea2cf5729fcffb60d593
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The function `nvme_ctrlr_init_ana_log_page` is exactly
same with `nvme_ctrlr_update_ana_log_page`, so remove it.
Change-Id: I1ad51635f47cf95cfa6de217e3b9144885c3b74e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13652
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The match run against btest.out.match expects to find only single
nvme in the configuration, however, some CI nodes may come with
multiple nvme drives causing this particular test to fail. To
mitigate this, make sure to create config with only a single nvme
bdev.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ifa390269b0e0a040b1aea752735c2692cbabac6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to mitigate the following issue:
https://github.com/spdk/spdk/issues/2596
which has been frequently breaking CI. Since failure occurs while
trying to terminate spdk_tgt, remove it from the equation completely.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9eb2423079ec0717b9b094ccb372adabac614463
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13802
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
allow DSA device to async offload crc32 calculation in nvmf-TCP
This patch can use DSA to accelerate crc32 computation, making
the io performance of TCP paths using crc32 approach the io
performance of TCP paths that do not use crc32.
Using SLIST to minimize the performance drop. SLIST has less
operation compared to TAILQ.
Thinking about memory thrashing, we should use the same memory as
possible to receive new PDUs. So, insert newly freed PDU in to head
is better.
The performance drop is within 1% compared to the TCP path without
crc32.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I480eb8db25f0e730cb198ca5ec19dbe3b4d38440
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11708
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Original implementation creates pollers and CQs for all discovered
devices at poll group creation. Device (ibv_context) that has no
references, i.e. has no QPs, may be removed from the system and
ibv_context may be closed by rdma_cm. In this case we will have a CQ
that refers to closed ibv_context and it may crash in ibv_poll_cq.
With this patch pollers are created on demand when we create the first
QP for a device. When there are no more QPs on the poller, we destroy
the poller. This also helps to avoid polling CQs that don't have any
QPs attached.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I46dd2c8b9b2902168dba24e139c904f51bd1b101
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a bdev is registered, it is examined by the bdev modules before the
bdev register even is notified.
Examination may be asychronous, e.g. when the bdev module has to perform
I/O on the new bdev.
This causes a race condition where the bdev might be destroyed while
examination is not finished. Then, once all modules have signaled that
examination is done, `bdev_register_finished` makes an invalid access to
the freed bdev pointer.
To fix this, defer the unregistration until the examine is completed by
opening a descriptor on the bdev.
Change-Id: I79a2faa96c1c893fc1cee645fbe31f689b03ea4a
Signed-off-by: Nathan Claudel <nclaudel@kalray.eu>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13630
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
abidiff gets confused if a data structure in a
private header files is changed, if there is also
a public header file with the same name. So avoid
this by forbidding private header files from having
the same name as a public header (i.e. one in
include/spdk or include/spdk_internal).
This was mostly already handled by using names like
nvme_internal.h, but we did have a few conflicts
which were causing our check_so_deps.sh script to
sometimes indicate a version bump was needed when
it really wasn't.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90895efd22c1594044f3c3f9344bb3a67a754c4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This avoids confusion with the public idxd.h
header file which causes problems with abidiff.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7910c93d9d95b99c82f4dfdba845e6804e1b6568
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13729
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When `dif_insert_or_strip` is enabled, NVMf library will do
DIF insert and strip automatically, client isn't aware of
it, when `dif_insert_or_strip` is disabled, we will report
Namespace E2E Protection Capabilities to client, but we
don't process PRACT and PRCHK flags in NVMf library, so
here we don't report the capabilities to client and leave
the use of extended LBA buffer to users.
Change-Id: Ic610dc65fef210a7799c6ab693d89138b99e1193
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12165
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the options in sock_impl_opts could be different for different
sockets (even if they're using the same impl). However, outside of a
few selected options (recv_buf_size, send_buf_size), there was no
interface to change them.
This change will allow users to change impl_opts on a per-socket basis
when creating a socket. Sockets created through accept() inherit
impl_opts from the listening socket.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7628ae19def25cef6ffa62aa54bd34e446632579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Also remove ftl_mngt_get_status() because it won't be necessary now.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I335831cb1c506379e9afeb0bf87f1f873033073d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Suppress werrors when building nvme-cli as they are
redundant for SPDK in general
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I173eae198db5cfc26cbc6b75aa36b0aad8077a79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12229
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Those lines are needed no more due to no 21.04 support
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ia53b04ce6953fed0fbb19779199382f63801380b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13498
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Disable werrors during QEMU compilation because
it doesn't matter for SPDK in general.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I55f68a585c3540192732883f42fae98f269e0022
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
That is possible to get/set registers from any thread,
during regs processing we are polling admin qpair to
get a completion. At the same time, another thread
can also poll admin qpair and that can lead to
undefined behavior.
This patch fixes an issue when bdev_nvme is configured
with io_timeout. If remote target becomes unresponsive
(e.g. due to link down), IO timeout occurs and bdev_nvme
tries to get csts registers in timeout_cb. At the same
time another thread can process adminq, so we may have
2 simultaneous adminq polls. If admin qpair is disconnecting
at that time (RDMA transport) we may destroy resources
twice from different threads.
We don't see a problem with set_regs function but it
won't be redundant to lock mutex in set_regs as well.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I7ec3984d25d0249061005533d13b22315b44ddf2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This implementation of xNVMe BDEV module supports the char-device / ioctl-over-uring,
along with the "regular" io_uring, libaio, POSIX aio, emulated aio (via threadpools) etc.
Code changes done :
a. Addition of xNVMe submodule to SPDK
b. Modification of RPC scripts to Create / Delete xNVMe BDEVs
c. Implementation of xNVMe BDEV module
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: If814ca1c784124df429d283015a6570068b44f87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11161
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix issue: #2568
Related test case is also updated.
A summary of the handling as following:
--json (json file used) and -f (continue_on_failure is set), the test case will run until end
--json (json file used) and as long as there is 1 Bdev met IO error, the test case will end when error happened
-z (wait_for_tests is set, means by RPC perform_tests) and -f (continue_on_failure is set), the test case will run until ctrl-c is triggered and will not end when run time is over as we could send RPC (perform_tests) several times
-z (wait_for_tests is set, means by RPC perform_tests) and as long as there is 1 Bdev met IO error, the test case will end when error happened
Change-Id: I886fc5cbd836f3bc5db618e7143cd3a556ea5e7b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13490
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since the command including * was being passed unquoted, the actual
pattern was being expanded on the host side. This became problematic
when multiple nvme drives were installed inside the host, e.g. the
command on the VM side was looking for a specific ctrl which didn't
exist there. Fix that by passing the full command as a literal string.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I3a3d578c735b9a07abb6e0bcefd6db0c343fc27b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13675
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Other parts have changed these since readv and writev
support ext_opts.
And change corresponding unittest.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I79260a7e6110aa46df2016e579f1da5c241c9844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This has been spotted while testing fedora36 builds
and fedora35 with the newest >=5.17.x kernels.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I012e293d2e6be65f9de80109f4e180ccbc1cd668
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12232
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This brings commit targeting fixes for the pu macros usage under
latest freebsd (13.x).
Also, group cherry-picks into cherry_picks() and apply them
together before the build starts.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id49aa3d6eb065d8bb92f48402304c4f11f3c047f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13544
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Preparation for incoming patches in the series.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I46a9c68b89034793083f536b8d3b20f68ad1482e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13640
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function processes and completes asynchronous write requests, so it
makes sense to rename it. This is done in preparation for handling
asychronous read requests.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3f36631dc24a3170204aaaba56f4968be0672fe5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the multi-process case, a process may call `spdk_nvme_ctrlr_free_io_qpair` on
a foreign I/O qpair (i.e. one that this process did not create) when that qpairs
process exits unexpectedly.
The variable `qpair->poll_group` isn't multi-process safe, we can't use it
in `spdk_nvme_ctrlr_free_io_qpair` and related transport poll group APIs.
Change-Id: Ic13a6a2c7d760477be5be5a56a45caa2b5518717
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It will not find the h2c related reqs in the tailq now.
We can get it from tqpair->reqs directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I25f0900e875b054d7617450477e9719e7a59aa18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This follows similar logic in the pcie and tcp
completion paths, including omitting error
messages when aborting aers by adding a print_on_error
parameter to the completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id558d0af2cdd705dfb60abb842bd567a0949ccce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
By default, the SPDK nvmf target reports vid==INTEL,
which results in the SPDK nvme driver trying to enable
Intel vendor-specific log page. Fix this by trying to
enable those log pages only for PCIE transport
controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ebf365d4fa6295d1f610697266c3ead765988d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We can only get to this code path if the controller
has vid==INTEL, so make that more clear by changing
the check to an assert.
Remove unit test that calls
nvme_ctrlr_construct_intel_support_log_page_list()
for a controller that is not VID==INTEL - this is
no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b58451bc95992bf641e7452f0ac4c2bac9fe31c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This follows similar logic in the pcie completion
path, including omitting error messages when aborting
aers by adding a print_on_error parameter to the
completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96df72280bb8fcbee3847fdc27f38e14a1bf3251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The test tool doesn't shutdown controllers when exiting the
process, so here we shutdown the controllers, also fix the
exceptions when no active Namespaces in controller.
Change-Id: I21cbdb1e7bdf37a06f66b917a2bb9bd94e06b444
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_qpair_abort_all_queued_reqs() aborts error injections, queued
requests, aborting queued requests, and outstanding requests. (Aborting
outstanding requests depends on transports.) However, it did not abort
queued aborts.
Include nvme_ctrlr_abort_queued_aborts() into
nvme_qpair_abort_all_queued_reqs() to do really the name of the
function indicates.
nvme_ctrlr_abort_queued_aborts() has been called in a few cases, but
we do not care duplication.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I19102cc6603a72ce5c398a7947cb4d606b692991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Since we ended support for soft-roce, openstack
tests, have been failing. The cause is lack of
RDMA capable NICs in the setup. We do not need
to change the physical setup to add new NICs,
so we are changing the transport type to TCP.
Change-Id: I9dce0a4f1dc6dc51e22ba61a8c8a23f4178fde84
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
It launches the bdev_svc app, creates an lvstore,
then grows it twice. In the first grow, the lvstore has
no logical volume. In the second grow, the lvstore has
a logical volume.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I21a7d3f1d2e6a6fe72e42f89023a8588391d2aba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add bpftrace and bcc installation from source for
Fedora35 and higher due to issues with the multipath
test and bpftrace/bcc installed from OS repository.
Fixes#2519
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ieedd544a8ac02d9071f0b76f6ddd7007f18f4570
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Remove QAT patches as they are no longer needed
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibfbe2087aac9431b0b7c8e2addeef555e407bf40
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12994
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Update QAT driver to latest version to enable building
the driver on gcc 12 / Fedora 36. Yasm is needed for
build process.
Change-Id: Ib133f22d0ee2bea5a82b6e7b0bfe408fa1523ce1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12231
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Update libvfio-user such that the SGL access APIs can be used
concurrently. We are guaranteed that the guest memory remains mappable
now that the vfio-user transport has implemented quiescence.
This is currently only really useful (for a single controller) in poll
mode, but shouldn't break interrupt mode, as we still ensure all a
controller's queues are on the same poll group in that case.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0988e731558e9bf63992026afc53abc66ec2a706
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12349
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
AEN single and multi testing are causing failures in the CI env
and have not been root caused. Disabling their tests from the
nvme.sh script for now until root-cause of issue #2559 is found
and fixed.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I6471d1f4b1d435356cd6b2f8db1f87a26bb9b162
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
gcc 12 reports that strnlen() exceeds the bound set by maxlen argument.
This patch changes to strlen() to silence the following error:
lvol_ut.c: In function ‘lvs_load’:
lvol_ut.c:1086:56: error: ‘strnlen’ specified bound 64 exceeds source size 4 [-Werror=stringop-overread]
1086 | spdk_blob_set_xattr(super_blob, "name", "lvs", strnlen("lvs", SPDK_LVS_NAME_MAX) + 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56caf5bbb06fa0ea2cc61a9eef145fc275a416b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
gcc 12 assumes that nsid might take value of UINT32_MAX,
which when represented as a string does not fit in ns_dev.
This is fixed by accomodating the UINT32_MAX string representation
and the 'n' character.
Following error was shown before this patch:
cuse.c: In function ‘verify_devices’:
cuse.c:133:42: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
133 | snprintf(ns_dev, sizeof(ns_dev), "%sn%" PRIu32, ctrlr_dev, nsid);
| ^~~~~~
In file included from /home/tzawadzk/spdk/include/spdk/stdinc.h:23,
from /home/tzawadzk/spdk/test/spdk_cunit.h:9,
from cuse.c:7:
/usr/include/inttypes.h:104:27: note: format string is defined here
104 | # define PRIu32 "u"
| ^
cuse.c:133:9: note: ‘snprintf’ output between 3 and 267 bytes into a destination of size 266
133 | snprintf(ns_dev, sizeof(ns_dev), "%sn%" PRIu32, ctrlr_dev, nsid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I14e058edc780d33abdd5eb6ce5ab47ac5d18f10a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13412
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
verify.state files are not very useful because
we fail the tests at any first failure.
If there was something wrong with IO verification
then autotest.sh would fail.
Fio files with metrics output (IOPS, BW, latency, etc)
are also not very useful as per-patch tests are not
focused on benchmarking.
Fixes#2546
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I33fbe2fb0749d840f08ffe0d606d206268140991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13019
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding more unit tests using standard openssl
The unfortunate small sleep is needed due to issue:
https://www.mail-archive.com/openssl-users@openssl.org/msg02937.html
Change-Id: I6f55453f12371bec6a402ba4c1d20e21aed73cf4
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12625
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This new test uses new ssl socket implementation
to create and test NVMe/TCP with TLS.
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Change-Id: I8c8f81fbc20d5811ecbc94d849a364e4f3f3945c
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12379
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ignore spdk_nvme_cdata_nvmf_specific ABI changes, only reserved fields
were changed. So this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I25c4c7576dc393a925d5b8c1a77b194ec7a60ce4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12868
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add missing fields from identify controller data structure, for
admin command set attributes.
Update the identify examples file accordingly.
Ignore spdk_nvme_cdata_oacs ABI changes, only reserved fields were
changed. So this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I718e3647835a0706a33e7aa6bae774e133071f9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12866
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add missing fields from identify controller data structure, for
controller capabilities and features
Update the identify examples file accordingly.
Ignore spdk_nvme_ctrlr_data ABI changes. Reserved fields
were changed, so this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I12e622324bc1b0ebef95b854098bce133617051e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12865
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
All other tests wait for scheduling to occur before verifying
the results. Even for 100% busy threads, they are first
round robined between cores.
In some edge cases, if threads are created right at the
end of the scheduling period - they will be 100% busy.
Yet due to low busy_tsc it will be deemed that two of such threads
can be placed on single core. To prevent that a few
full scheduling periods have to be observed.
Thus added sleep for 10 scheduling periods before verifying
the results, similar to other test cases in this file.
While here increased the sleep time between samples to
match the scheduling period. With 1 sec default scheduling period,
no change would occur between two 0.5 sec samples.
Fixes#2140
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5abf3bc04c6f65f4faae2bcd3e6828be72f97311
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The aer test print statements were overly complicated for multi
process mode, so a macro was created to simplify them. The macro
will prepend "[Child]" to the child process print statements to
make it easier to see which process is doing the printouts.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I0ecc5e2526b156fa7f98d44c745408ba922ebeff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12881
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
