We can do better than "sleep 5". Instead use waitforfile(),
that will wait until the namespace is available.
Moved around the variables with names and checks for the ctrlr/ns
existence after all the tests complete.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8326c2cec0d0cf5aec88b5f80c1126c81eb09436
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2951
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enviroment for VPP and posix tests was prepared differently.
Since VPP is no longer tested this patch removes path for
starting VPP application and configuring interfaces there.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie55646207d07bbbd7edddd3caf2f2cc23bf27e23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3728
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Other common scripts for nvmf and vhost already used
TEST_MODE set by autotest_common.sh.
Meanwhile iscsi was processing it for each test script
separately.
This patch simplifies iscsitestinit/iscsitestfini
functions to just use TEST_MODE.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iacbdb552207eff72b41f2adb505e83348567df57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3727
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If $output_dir is not set, cwd is used as a designated output dir
throughout the runtime of the script that sourced autotest_common.sh.
This, however, may fail in some particular cases, e.g. when calling
autobuild.sh directly from within the spdk repo. As a result some
*.txt files that are created by scanbuild_make() will end up in the
root of the repo. This causes porcelain_check() to fail as it does
pick these files up after the test is done.
To avoid similar scenarios, simply make sure the desired output dir
is always created and that it resides outside of the repo.
Change-Id: I5b2e142ce9c2a0b8d24d5331f2b52110c9634c67
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2791
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Test steps were disabled due to issue #1146.
Which has since been resolved by patch:
(991a56f) fio: Continue polling spdk_threads on the init thread after shutdown
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id5c2849a94b23e95bb222b8a70c538f392896a30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Host connects to nvmf in multiple paths, that we can use
different ports on one nic to test this case.
Then this case can be tested on all machines even though they have only
one nic.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I021e2e1923361ecb4de1e260b2c277f7719f8335
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3590
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This call can be made directly now that
spdk_nvmf_qpair_disconnect is thread safe. It's
actually better that we do it this way, because
the qp destruct call is guaranteed to block until
the ib events associated with it are acknowledged.
this means that by processing the disconnect before
we ack the event, we will have valid memory to do
the atomic checks.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If6882b7dc568fe4c35f4a35375769634326e9d76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3681
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We should use this function as the synchronization point
for all qpair disconnects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic685ac3481765190cc56eeec3ee24dad52e336c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3675
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function should be the synchronization point for all
disconnects regardless of whether they begin on the transport,
from an RPC, or in response to application termination.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If3553ab3a9e265b0938c84832cb9f774852d7565
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3674
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe-oF controller creates a ANA group for each namespace,
ANA group ID matches namespace ID, and default ANA state of ANA group
is optimized, and the MNAN field is set equal to the NN field.
If a ANA log page contains multiple ANA group descriptors, it has
one or more descriptors will not be 8 bytes aligned. Hence we create
one descriptor and copy it to the ANA log page at a time.
Change count will be supported later.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ba6aa78983480caa3dfbf22aefc9aeabfd5405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to implement the group polling
policy instead of each rbd has one poller.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ieb975e656240bcdaf2657410f010d72b156639ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3698
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use rbd_aio_readv and rbd_aio_writev to simplify the code.
Since it rbd_aio_readv/rbd_aio_writev are supported more than 2
years, so can replace rbd_aio_read/write without using "ifdef".
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I924a039110ceed59836c1b904b6e7f8db271ad62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3697
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
FTL core poller should return SPDK_POLLER_BUSY flag only
when some writes operations were processed.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I50e2b536fbec819887148cc045d76c5c5d78beb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are 2 messages passed between when
_nvmf_ctrlr_free_from_qpair is executed and when
nvmf_ctrlr_destruct is executed. That leaves time
when the controller->qpair_mask is not a valid
pointer, but it is still in the subsystem
controllers list.
The purpose of this patch is to close that hole.
It is part of a larger series aimed at cleaning up
the controller destruct path.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c0199c8392ee278f36df56f599beb10e7a46948
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3685
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
lsblk used in waitforblk() works on blk device names
withouth full path (e.g. "nvme0n1"). This results in
a timeout because we pass "/dev/X" as an argument.
waitforfile() is the way to go in this case.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I47a2b76bce6f15e0ffa2070e581bbf16f9647bdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3694
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This setting may be crucial on some systems in keeping core dump files
in order, that's why we should always make sure it's main value is
restored upon exiting from autotest.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0c81a8c96c2d8f061e95c2614d9c30f4e3cdd5a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3605
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch will pass when CUSE tests are switched from
job executing on virtual machines to physical machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9c13106084197d8d197ee3c50c920c889c86e645
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
When fio wants to shut down a thread, it stops polling it immediately.
Some SPDK threads need to continue to be polled for a period of time
to allow the message passing to all complete, so this behavior in fio
could lead to a hang. Instead, when fio wants to shut down a thread,
place that thread onto a global list that's polled by the init thread
which lives for the duration of the program. The init thread will
continue polling the spdk_thread until it has exited.
Change-Id: I07292d5ba389167c45a14aa8ffbe72b49e88d17d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3682
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This API differs from spdk_nvmf_tranpsort_stop_listen in
that it also disconnects the qpairs associated with
that listener.
Change-Id: Iadfc6d2debc0ef8f1a8cd5db4f20168aeae8264d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3279
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to use this RPC to detach only specific
paths from controllers.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib52e38aa7d4ea096418a6dc0328481c2e8db6c54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3070
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This RPC was using snprintf which could potentially
truncate a bad argument silently without alerting the
caller.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1795b2e4086cbaa45390bd11b189755818b5c9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3613
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
According to customers's report, there still exists
the Rados related thread contention with SPDK's reactor thread.
So also meove bdev_rados_context_init into bdev_rbd_handle.
With this patch, QEMU + SPDK vhost + Bdev RBD 's performance
can be improved.
Change-Id: Ie26a140f8d2cfe1a98cd1737f4ff70e9319cdc11
Signed-off-by: Yaowei Bai <baiyaowei_yewu@cmss.chinamobile.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3699
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the portal group map of the target has a redirect portal,
iscsi_tgt_node_is_moved() fills the buffer by the redirected address
and returns true.
iscsi_op_login_check_target() calls iscsi_tgt_node_is_redirected() before
calling iscsi_tgt_node_access() because login redirection can be
checked before any or after all security check.
If iscsi_tgt_node_is_redirected() returns true, notify login redirection
to the corresponding initiator.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4573a69c0a32eafcfe48080a033c135e127da321
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iscsi_tgt_node_redirect() updates redirect portal of the initial
portal iin a primary portal group for the target node.
Check if the specified portal group is a public portal group and is
mapped to the target node first.
Then if the passed IP address-port pair is NULL, clear the current
redirect setting. Public portal group and private portal group are
clearly separated and redirect portal must be chosen from a private
portal group. Hence this clear method is intuitive and simple.
If the passed IP address-port pair is not NULL, check if they are
valid, and are not in the specified portal group. Then update a
redirect portal of the portal group map.
Finally, send asynchronous logout request to all corresponding
initiators.
Besides, change allocating pg_map from malloc to calloc to initialize
redirect portal.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79d826663f4c3d5a117add286f133adeb1ce07f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3222
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All redirect portals in private portal groups are temporary and so they
should be informed only by temporary login redirection response.
Then this patch changes SendTargets operation to return portals only
in primary portal groups.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic62ada749886290df2d1490377cc5ca883b3f47a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3492
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK iSCSI target, portal group works almost as identifier of
portal.
To support iSCSI login redirection, we need to have two types of
portal groups, public and private portal groups.
We need portals of public portal groups to redirect to a portal in
a private portal groups at login via temporary login redirection
funciton, and we need to make SendTargets return only portals in
public portal groups.
To do these simply, we mark primary or secondary portal group expicitly
at its creation by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iccf87a4b9dd1f4a8fbb857a399b8f2dbc7c0b3ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3491
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a helper function iscsi_parse_redirect_addr() to validate the
passed IP address-port pair.
iSCSI login redirection will support only numeric IP address and
TCP port, and add AI_NUMERICSERV and AI_NUMERICHOST.
This function is almost same as nvme_tcp_parse_addr() and
nvme_rdma_parse_addr().
Besides, update error log in posix_sock_create() to use
gai_strerror(). gai_strerror() will provide more accurate
information as done by nvme_tcp_parse_addr() and nvme_rdma_parse_addr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65c6de81a64dcb26551ce796172d0458e1c298a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3357
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patch was merged while still having parent one
pointing before SPDK 20.07 release.
(61cd9d) lib/sock: Add option to enable or disable quick ACK
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1cbc0acfdd2a1a5403844167a107e0f63a2e213c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3709
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NOT() function is meant to report a success when given test
fails. This negative testing is meant for specific cases, however,
there may be some circumstances where application failed, but not
for the reasons the tests was aiming for, e.g. upon receiving
signals from the kernel, like SIGILL, SIGSEGV, etc.
To make sure the test is aborted in such a scenario, check exit
status of the execution more carefully. If it matches any of the
defined signals make sure to fail the test. By default, all signals
which generate cores are looked up and SIGKILL which may be sent
out by the kernel as well (in case of the oom-killer).
Also, $EXIT_STATUS var is provided to specifically declare which
exit status NOT() should be looking for if process terminates with
a failure (i.e., for any other reason then receiving a signal).
Change-Id: I67b42ef038ef4553aceaf96d4da139858d819f22
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will avoid adding similar components into multiple scripts
instead of just one.
Change-Id: I83cff1ad883f3a7054d0f21ec20210c81cb6b9c1
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3525
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make sure that we patch only a specific version of the driver that
we know works with given patches.
Check if $DRIVER_LOCATION_QAT looks like something we know and
proceed with patching if it does.
Change-Id: I27d82793ecfd6ad4cfb625cf14fcdda9fe822856
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3507
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The pci_cleanup_aer_uncorrect_error_status() was renamed to
pci_aer_clear_nonfatal_status() in kernel 5.7, details here:
git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=894020fdd88c1e9a74c60b67c0f19f1c7696ba2f
Change-Id: I233718e02d95f46ccef4d78a4d1f626950cd8503
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3506
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
timespec and other time related types were hidden in 5.6 kernel,
details here:
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c766d1472c70d25ad475cf56042af1652e792b23
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=412c53a680a97cb1ae2c0ab60230e193bee86387
Change-Id: I02ed16f9047337c77cc9ad344bbb40c52b3202be
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3505
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is done as a preperation for oncoming patches which will
require additional pieces of the kernel version to work with.
Change-Id: I365201d8254ee68a0201790dff29474545a4f50a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3504
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
