There were two variables controlling libftl's tests. Only one of them
is actually needed (SPDK_TEST_FTL), so this patch removes the redundant
one.
Fixes#956
Change-Id: I125b9cb7d855351488b445da165be9e27f10f914
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By moving the success test case to the end we avoid the scan-build
issue however the last test case was already testing success so just
udpated the comment and free the memory at the end.
Fixes issue #933
Change-Id: I0ca81f240d3af32c414b0c886fda5b14ba37e490
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467302
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Dependencies install with -i option works OK.
Additional dependencies with -t option:
- rocksdb - OK
- librxe - OK
- iscsi - OK
- ocf - OK
- flamegraph - OK
- tsocks - OK
- nvmecli - OK
- fio - compilation errors on version 3.3
OK if updated to 3.15
- qemu - OK, but need to disable some error warnings:
-Wno-error=stringop-truncation
-Wno-error=deprecated-declarations
-Wno-error=incompatible-pointer-types
-Wno-error=format-truncation
- qat - not run
- vpp - not run
- libiscsi - compilation errors
Change-Id: Ifde26c1f1d35c8fe06e18ddba33fe2d054b6d2cf
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new test flag SPDK_RUN_NON_ROOT forcing some of the
SPDK applications to run as an unprivileged user. For now
we implement it in nvmf tests. If enabled, nvmf_tgt will
run as the user who invoked `sudo ./autotest.sh`.
Running SPDK as non-root has two major prerequisites right now:
* there must be an IOMMU in the system in order to use PCI devices
* DPDK version must be either < 18.05 or >= 19.08-rc1
Change-Id: If1ba9dfcc09fc6cac059867408a1b54eddecfb4b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_pci_device_claim() could create a file on the
filesystem that couldn't be deleted programatically.
It could only be overwritten - e.g. by another spdk
instance - but this didn't really work if that
another instance had less privileges and hence no
access to the previous file.
This is exactly the case we're seeing on our CI when
running SPDK as non-root. In general it's a good idea
not to leave any leftover files, so now we'll delete
the pci claim file when the spdk process exits.
spdk_pci_device_claim() used to return a file descriptor
that could be simply closed to "un-claim" the device.
It'll now return only a return code. The fd will be
stored inside spdk_pci_device and will be closed either
when user calls the newly introduced spdk_pci_device_unclaim(),
or when the device is detached.
We'll still need to clean up those files somewhere in
our test scripts (probably ./setup.sh cleanup) to
clean up after crashed processes or so - but we don't
necessarily want to run such scripts inside the autotest
whenever a non-root spdk is about to be started.
Change-Id: I797e079417bb56491013cc5b92f0f0d14f451d18
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use var=$(command) to assign output (or quote to assign string).
Change-Id: I4067db46697c32f24e0b4df7d573929ee75757a7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Prepare for the further optimization work
to use one bigger buffer to read more data for
reducing system calls.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie92603b09308bd3149263269fdec355b67251b37
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These aren't used anymore.
Change-Id: I91400f1ad8a620d84f1b7478ffa551bb1755d233
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
These were removed from the nvmf target, so the stubs aren't
needed.
Change-Id: I77b783019ee842c15d92b89cdffcb342b10d92c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The calls were removed from the code, so we don't need
the stubs anymore.
Change-Id: Ie3616d186ab172c3b7a6223b4ff754308fad9dc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
No longer use the event system.
Change-Id: Ib75d17e481f3421859142a4cee4b5881570e8582
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is a very rare thing for a buffer to be split over two memory
regions. In fact, it is only possible in dpdk versions where
--match-allocations is not passed as a startup parameter to dpdk but
dynamic memory allocation is enabled.
By adding a small helper function, we avoid failing an I/O because it
was assigned one of these improperly aligned buffers. Also, we try to
remove the buffer from circulation so that it doesn't get picked up
again by another request.
Also, add a unit test to catch this case.
Change-Id: Ia09865c2f77160a960571665b29c4533b11758ae
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Test scripts are no longer failing and can be
re-enabled in nightly testing.
Change-Id: I07e682466f98a63c65b1d17cca47a4136809e8c9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removing "shift" command because it was not needed and
caused vhost run command to be not properly constructed.
Needed to fix if contition for --no-pci param while at it.
There was no $no_pci variable defined after optargs were
removed.
Change-Id: I72c615fdb2a5fd507efedae100b9b79c5cfd8935
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This line called vhost_kill with 2 arguments:
$1 - string "0"
$2 - string "vhost_name"
Problem was that vhost_kill only accepts 1 argument, which
is "vhost_name". This was not noticed because in seems in
most of our tests we just use the name "0".
This would fail to kill a vhost instance in case it would
be named anything else than "0"
Change-Id: I635c5b92673abb7350d8bd6c636f6b794651f7ac
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In prep for replacing some of the internal r/w calls with function
pointers based on RAID level, just call spdk_bdev_io_get_buf()
directly in the submit path for reads. This:
* will reduce the number of places where unique calls to the
upcoming function pointer will be
* bring it in line with how the majority of other bdev modules look
* actually increase UT coverage by about 10% as we're now calling
spdk_bdev_io_get_buf() and it's callback.
Change-Id: I7e6da0dab80687988ba52f57b0d9e2dbf20676dc
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467538
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A sub-team over a year ago agreed that there was not enough value
in checking test plans in to the repo as they require maintenance
and their primary purpose is not to document how the module is tested
but to facilitate discussion during test development. It was agreed
that we would use the review system to iterate on test plans but once
the actual tests were developed that the plan would not get checked in.
This patch just removes those that were likely in the repo before that
discussion.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I75dcdd8b4754b7ecb4a21079b251c707557a3280
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a preparation to use zcopy APIs for write I/O.
When we use zcopy APIs for write I/O, submit_task() will be called
in the callback to spdk_bdev_zcopy_start().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15bfce5b39ddd65459274fad7628f2c8fbb22327
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to use zcopy APIs for write I/O.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I685d0e1e5860c7ec72d4680c48ee7c0b5e9071bd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to use zcopy APIs for write I/O.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7c544fc08db029e1b5ff32458e53dcbb014a5722
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Two return code checks are added to bdevperf_complete().
Checking if return code is not false will be enough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic097e37c2d74aa3860bb06931f320c9f18c45640
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The dependencies between vhost and rte_vhost were not added during
earlier changes. This change moves the rte_vhost directory up to the
level of the other libraries and adds the proper dependencies for when
it is linked.
Change-Id: I089de1cd945062b64975a0011887700c0e38bb0f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is at least one example of an SPDK shared library dependency that
is only linked against on certain conditions, so add a framework for
dealing with those conditions now.
Change-Id: I63ad767994c5f56f2908f70016e700f5bb74a5f4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Removing queuing tests as they are really only testing mocked functions,
minimal coverage is gained here and the queueing logic from a UT
perspective is part of bdev, not a bdev module.
This is a prelude to adding RAID 1E which will start with abstracting the
RAID r/w functions and it may not look like it now, but getting rid of
this UT code will make the move to function pointers for r/w based on
RAID level a bit smoother.
Change-Id: I01eef2aa99b2bdd4308ddef9bad9dd1121ef7470
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467537
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there are enough subsystems, the discovery log page spills
over to a second page. Add a test to confirm that is working.
Change-Id: I1df57b0b9a543736fe4c48f2cfe5628cb963a631
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466820
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For in each loop, encoding with Arm NEON deals with 48 bytes and decoding
deals with 64 bytes:
encode: add test with src_len=48 and more than 48;
decode: add test with src_len=64 and more than 64.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ie156d147165a2511eed03d212eb78300e0edc84c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Notification test generates config for all NVMes
in the system, but expects only one. We should
generate configuration for only one NVMe.
Fixes github issue #945
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I170c19b45b7981c1d7dfd1ae5bc64a4fc164105c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467374
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix SC1087: Use braces when expanding arrays,
e.g. ${array[idx]} (or ${var}[.. to quiet).
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0ffa91da9847ee0805b664cba573346ab5b83f3a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466898
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove them all at once. spdk_ prefix should be
only applied to publicly exported functions.
Change-Id: Ib6d2bd0954ec5cb7c8cf253d79b9d3cd8aa0eeef
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This unifies buffer management among transports further and is a
preparation to make buffer allocation asynchronous.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c588eeac4081f50fe32605feb7352f72c628d95
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466847
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both RDMA and TCP transport have uesd group for such case. Hence
FC transport changes to use group instead of tp_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4b401179da506bb204c3ec48650db87f91fe72a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466843
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to nvmf_poll_group is set in nvmf_transport_poll_group_create()
after returning nvmf_fc_poll_group_create(). Hence holding it into
struct spdk_nvmf_fc_poll_group is duplicated and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7087c5cdb94b0b0c5f51b0b63b631c08266c90d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466842
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rgroup and TCP transport have used tgroup
for such case. Hence FC transport changes to use fgroup instead of
fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I91b7ad6a1c6e45caf92801b0635b18d48b3c9810
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466841
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Double quoting of string in "$IO_QUEUES" results in bash
replacing the variable with '-i 8' instead of just -i 8.
This makes nvme-cli to consider the string as a single
option, not a key/value pair and results in
"Invalid argument" error.
Change-Id: Ibc2f6324baa3c90aa7bf43128c5e7486e38c1fc1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467112
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Keeping a global discovery log page was meant to be a time saving
mechanism, but in the current implementation, it doesn't work properly,
and can cause undesirable behavior and potential crashes. There are two
main problems with keeping a global log page.
1. Admin qpairs can be assigned to any SPDK thread. This means that when
multiple initiators connect to the host and request the discovery log,
they can both be running through the spdk_nvmf_ctrlr_get_log_page
function at the same time. In the event that the discovery generation
counter is incremented while these accesses are occurring, it can cause
one or both of the threads to update the log at the same time. This
results in both logs trying to free the old log page (double free) and
set their log as the new one (possible memory leak).
2. The second problem is that each host is supposed to get a unique
discovery log based on the subsystems to which they have access.
Currently the code relies on whether the discovery log page offset in
the request is equal to 0 to determine if it should load a new discovery
log page or use the cached one. This is inherently faulty because it
relies on initiator provided value to determine what information to
provide from the log page. An initiator could easily send a discovery
request with an offset greater than 0 on purpose to procure most of a
log page provided to another host.
Overall, I think it's safest to not cache the log page at all anymore
and rely on a thread local fresh log page each time.
Reported-by: Curt Bruns <curt.e.bruns@intel.com>
Change-Id: Ib048e26f139927d888fed7019e0deec346359582
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466839
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default nvme-cli will try to connect to subsystem using
number of io queues equal to number of available cores.
In case of more powerful CPUs and HT enabled this results in
more time needed to allocate resources.
Using "-i" option for nvme connect allows us to control the
number of IO queues and avoid timeout issues when testing.
Fixes issue #927
Change-Id: Ibb9b89b2d8be84fba29360db0f781cc99ae5c5b1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466389
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was never rebased after the shellcheck changes
went in. Fix it so that master can pass check_format.sh
again.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic124c8e77049f08ab29a5b4a902e7718d378dd22
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466951
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a small performance optimization and an effort to unify
I/O buffer management further among transports.
It is ensured that the request is the first of STAILQ when
spdk_nvmf_tcp_send_c2h_data() is called or the case
TCP_REQUEST_STATE_NEED_BUFFER is executed in spdk_nvmf_tcp_req_process().
Hence change TAILQ_REMOVE to STAILQ_REMOVE_HEAD for these two cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0b195874ac22a8d5ecfb283a9865d2615b7d5912
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use old rpc in conf.json to check
if rpc alias if handled properly.
Change-Id: I466e39dd6b4adf140225060e46752250ae30ddb4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465666
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not any different from the test_env version in this patch but it will
be in the upcomiong series as the 2MB tests are added as we will need
to manipulate the size param.
Change-Id: I13a7544546b5296421fe5b696c8777e402bacc35
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch introduces new hotplug test which uses
PCIe interposer capable of physically connecting and
disconnecting NVMe drive from the system. It uses
custom build HW based on mircrocontroller to which
we connect and through which we send command to NVMe
interposer to connect or disconnect NVMe drive from
test machine. Scenario of this test is similar to the
scenario we are using for software hotplug test with VM.
Parameters for the test are IP address of the microcontroller
and GPIO pin to which the interposer is connected.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3610dadfd23521da2c90fd83e6895d942b3f66df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462470
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
perf is under the examples directory, but it's much more than
an example application and probably needs to be moved. We use
the libaio functionality extensively as part of benchmarking
and comparing the SPDK driver with the kernel driver. So we
need to keep this functionality.
This reverts commit b3d9ebae21.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb9a1df919d32a98c328101029cc22e91915a976
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Most of the assignments followed the DIRS-($(CONFIG_X)) pattern, but
there were a couple of assignments using a different pattern.
Change-Id: I7c80fec2813c32cb7676912d72805565f77b2e3d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The shared object dependencies could easily change over time. It is
important that we keep this list up to date and we don't change
something without updating the makefiles. This script checks each shared
object file to make sure that its readelf dependencies match up with
those specified in the makefile.
Change-Id: If508fb0205e85f8f5d217033194bfb5b0179d11c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_tcp_request_free_buffers() and
spdk_nvmf_tcp_request_get_buffers().
Set tcp_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I286b48149530c93784a4865b7215b5a33a4dd3c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_rdma_request_free_buffers() and
nvmf_rdma_request_get_buffers().
Set rdma_req->data_from_pool to false after
spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fc4c261c3197c8299761655bf3138eebcea3bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a prepration to unify buffer management among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b1c208207ae3679619239db4e6e9a77b33291d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to unify buffer management among transports.
struct spdk_nvmf_request already has SPDK_NVMF_MAX_SGL_ENTRIES (16) * 2
iovecs. Hence incresing the number of buffers twice will be no problem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb525abbf35dc9f4b8547b785b5dfa77d106d8c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Purpose: Prepare the further optimnization in the
target side whening receving pdu headers, we expect
to use zero copy.
Change-Id: Iae7f9106844736d7160d39d0af1f5941084422ec
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Some time ago spdk_subsystem_init() used spdk_events as
callbacks, but it was removed.
This patch removes left over UT stubs.
Change-Id: Id25ac8e4e338c172d21161dede6dc046f0860279
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is related to issue #815. To avoid hung and re-enable
testing this part of ocf, this patch changes backed device from aio to
nvme.
Hung in this test was caused by implementation of AIO bdev and bdev layer.
All AIO bdevs are using the same shared context with limited queue depth,
so in some cases AIO can return NOMEM status. It's ok when we have more
than one IO from bdev layer perspective, if not we will stuck because
nothing will triger retry io procedure.
This patch only enables testing and are not fixing root cause of hung.
To prevent before unexpected behavior of this and next one test we
need to clear ocf metadata on nvme device.
This patch also reenables this test in CI.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ibab4aefb9aaf33d725db20345bd5c09c1e5eebdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Track the band under defrag inside the reloc module. This allows for
multiple bands being defragged at the same time (e.g. extra one due to
write fault) as well as makes it easier to handle cases when relocating
a band that has no valid blocks.
Change-Id: Ia54916571040f5f4dfdb8f7cdb47f28435a466d8
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I think: print_scsi_tmf_io_data() corresponds to SCSI_MGMT_NAME,
print_scsi_io_data() corresponds to SCSI_IO_NAME.
Change-Id: I6c7deb4bb1a86449cea9d077eac6debf39f09532
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466268
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new interface for opening bdev and
implements new style remove event. With that changes
user can be notified about different types of events
that occur in regards to bdev. spdk_bdev_open_ext
function uses bdev name as an argument instead of bdev
structure to remove race condition where user gets
the bdev structure and bdev is removed after getting
that structure and before open function is called.
spdk_bdev_open is now deprecated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I44ebeb988bc6a2f441fc6a0c38a30668aad999ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently we *always* wait 2 seconds before starting
controller initialization during attach. This
works around an issue where some older Intel NVMe SSDs
could not handle MMIO writes too soon after a PCIe
FLR (which would be triggered when VFIO was enabled).
After further discussion with Intel experts, we know
the SSD models that exhibit this issue. So we can
quirk this so that only the older SSDs incur the extra
delay.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieb408c24f6afd5bd5147d1c87239aa20f2d13511
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
In the event that our fuzz test passes, we should manually remove the
trace files from the /dev/shm directory. This will prevent us from
failing to allocate /dev/shm files when a machine consistently passes
the tests and doesn't reboot.
Change-Id: I2ccde6aba7d61fda3a28ed24e009c6f8f81c20b4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Scan-build on Fedora29/30 reports error, which this patch fixes:
bdev_ut.c:1436:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
/usr/include/CUnit/CUnit.h:123:30: note: expanded from macro 'CU_ASSERT'
{ CU_assertImplementation((value), LINE, #value, FILE, "", CU_FALSE); }
^~~~~
bdev_ut.c:1654:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
/usr/include/CUnit/CUnit.h:123:30: note: expanded from macro 'CU_ASSERT'
{ CU_assertImplementation((value), LINE, #value, FILE, "", CU_FALSE); }
Fixes#924
Change-Id: Ia7dc6ce066ac80fc45f022eefd43a224d2f11503
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466110
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Run spdk_trace_record once iscsi_tgt is started.
This movement can make sure spdk_trace_record is running
before iscsi_tgt's exit.
Fix issue #908
Change-Id: I4e4420fbd0f7586721c7bc8f13837c25b4470da9
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465847
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for testing the 2MB boundary condition multiple changes
were needed:
* update mocked mbuf function for chaining
* init next pointer to NULL during mbuf allocation
* set and check expected physcal addresses in _compress_operation()
* init iovec values in test routines to more sane values
Change-Id: Icff030e8bef693952f7da66e7aae77e207fbfd40
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Present since the refactoring on driver init function.
Change-Id: I5b2877f4278b62a9efa53395f6910ef199f2c100
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Will be needed to add specific tests for crossing a 2 MB boundary
later in this series.
Change-Id: I7404a019ff2f837f54ffdef39c6219e86aa258f1
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove code that was freeing memory in the code under test. It was
no longer needed following a refactor of the init code and was
causing a double free.
Change-Id: I99018587ac12e01d4fe950e0718c23790ce7ce41
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Update to version currently used on test systems.
Change-Id: Idbc12f0dd089dbe4b0919a936eac8a36020c3994
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465665
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a part of a change that will introduce
new spdk_bdev_open_ext function. This will make
possible to pass callback function while opening
bdev which will be called when some bdev events
occur.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3e552edd5c90dacd39885e75e9114e48dddf50ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To avoid changing the actual compress/decompress routines, just
use a scratch buffer to support incoming iovecs.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55851866dd1b2d9c0eb44fac35d050d7abd00e4e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
First in a series to fix broken reduce unit tests, they have not
been running in CI for quite some time. Once they are working
again, will have Jenkins udpated to make sure they are run per
patch.
Change-Id: I12767dfea61a2e9a1ced85b9b247b5aeadc1edde
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465207
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will provide a unique identifier which can be used to provide get
and set methods within the RPCs.
Change-Id: Idd144e99e49b8d26530f60530d2e908b18fa251b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is necessary to allow the spdk_nvmf_tgt structure to evolve over
time without having to further change the target API.
Change-Id: Ib0f0f9b1f190913feff0229c96df4e84b1bf35f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Combinining these two libraries removes some directory complexity. It
also helps us to align on a common practice for including the rpc code
with a given module. This is how all of our bdev modules already do it.
The nbd, net, and scsi modules also follow this pattern.
Change-Id: I5e4c99d7f0facacc6dfe30b2274b60e0d151f8d8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
You can run this at your desk as follows (from SPDK repo):
sudo -E ./test/vhost/fio/fio.sh --iso
Change-Id: Ib83e21e8b8450d1bfce6a0223642c4087f9f47dc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is patch that implements changes according to proposal
submitted in https://review.gerrithub.io/c/spdk/spdk/+/453036
Change-Id: I5423cd34cb5fc111b34cab2b7f7c6c5f11898af8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464677
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function is useful for each test which use nvme device, so
it will be easier to keep it in autotest_common.sh file instead of
including also nvme.sh in each test.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ic2e186826211725b95f3ec3b455d23f43ea41b8f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous commit which fixed this styling issue was not
rebased before merging, so this single place was missed.
Change-Id: I67c5024322c97afd031b3a28ab3dfd686cd96cee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465125
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix SC2064 issue.
Use single quotes, otherwise trap expands now rather than
when signalled.
Change-Id: I0b3a9157f52eed037e8d217f639c64d6876ec1e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Users can use '-N' option to disable shutdown notification
for faster shutdown process.
Change-Id: I227dc4da3aa2f89d23f9b235e979cb6d3e25d635
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test is meant to simulate uncommon network situations where lots of
I/O are getting dropped before they get to the initiator. Essentially,
we are trying to trigger the initiator timeout in the kernel which
disconnects from the target and reconnects after 10 seconds.
This test is different from the other tests that we have currently
because it doesn't rely on killing either the target or initiator.
Instead it expects the target to stay up and properly respond to the
initiator error conditions. The hope is that the fio job running on the
initiator can still complete successfully and the target doesn't crash
due to improperly handling the disconnect and reconnect.
This test should be added to the nightly CI jobs because it is rather
time consuming.
Change-Id: Id457d9eb21a980140f065663547b89b2c69ace93
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464459
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Some lines in this file are long and should be broken
as bdev/raid/raid_rpc.c was done recently.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98a7f965b7230f32ab6a2d33a0f204591fa92ac1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464484
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Ordering stub definitions by libraries or modules will be a little
easier to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7568c94691229188c348a9c5e3fba8f2bc1ecf04
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464483
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use cached pointer to g_io_output in IO verification to improve
readability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I71ced5d1e438d5046b9a5913a1a2860f8435d79b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464485
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Create a helper function set_io_output() to setup expected IO output.
Besides change the name of cached pointer to expeced IO output
from p to output because p is ambiguous.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7574bf8362f7c5d7841e08b4fbd9a9b66836012a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
create_construct_req() had been located just above raid_bdev_init().
However this location was not intuitive. Hence move create_construct_req()
to just above spdk_rpc_construct_raid_bdev().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5998146ce7b4b9a3c3bdeb38b6dbc8dd21fa276
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464481
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed initialization of io channels to be made in the core/read
thread themselves. This fixes potential hangs when using the ftl lib
directly, without bdev and initializing an ftl device from a different
thread than will be used for IO.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I7089cc46cc6de5e9008e7c22cc01d2b4103ebb14
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464891
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
conn->target is initialized to NULL in iscsi_op_login_phase_none
and then configured in iscsi_op_login_session_normal. Hence
subsequent references to target node can be done by conn->target and
related local variables can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I68b94cb8e136522ef1e0ed74c0035ec2b666bb9e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch binds poll groups to SPDK thread through IO channel and
assigns connections to poll groups instead of cores.
iSCSI subsystem registers iSCSI global object as an IO device, and create
poll groups as context of IO channels of the IO device.
Each portal get and hold portal group on which the corresponding acceptor is
running.
When a connection is constructed, iSCSI subsystem assigns a poll group
to the connection by getting it from the corresponding portal.
When a connection enters full-feature phase, iSCSI subsystem schedules
the connection to a poll group by round-robin.
Then, each connection can know its running SPDK thread directly and can
use SPDK message passing infrastructure instead of SPDK event framework.
By this change, iSCSI connections are binded to SPDK thread, and not
binded to processor core anymore.
Some other changes in this patch are
- core ID is removed from the output of get_iscsi_connections RPC. The
upcoming patches will change the RPC to use spdk_for_each_channel and can
access SPDK thread safely, and add SPDK thread ID instead.
- utilize UT multithread framework added by the last patch to test
iSCSI poll groups by UT.
Change-Id: Iec73c778aa413bcabdb63141cc41d4160911ea0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463359
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to the next patch to test IO channel. Separate
this from the next patch to clarify the intention.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaa456667b5509d5fd8470315e2716b0b9fe209a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464811
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a helper function create_get_raids_req() and move duplication
of category name and initialization of related global variables into
the function. Some operations are re-ordered accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I03e12e8d77872634a65a94b4cd4092554e376b13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Create a helper function create_destroy_req() and move duplication
of bdev name and initialization of related global variables into
the function. Some operations are re-ordered accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I60f01103faec3ec7ec6c317470b043f84187a4c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Create a helper function create_construct_config() and move
create_test_req() and initialization of related global variables
into the function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia675f67e8332247cce4585a2d287b8062d4e1359
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Create a helper function create_construct_req() and move create_test_req()
and initialization of related global variables into the function.
The next patch will create an another helper function
create_construct_config() and move create_test_req() and initialization
of related global variables into the function.
Hence move the common part of create_construct_req() and
create_construct_config() into create_test_req().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6852fdc7966359a1029c809565ceb7230b749dc6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464477
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
snprintf() do not write more than specified bytes including the
terminating null byte. If the output was truncated due to this limit
then the return byte is the number of chars excluding the terminating
null byte.
So remove NULL byte appends after snprintf() in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic5b7719791721c6ae7b1dd8367be454b34df0fe5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464476
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some places had used dynamically allocated strings but they were
just duplicated from string constants. Hence we change them to
use string constants to make refactoring easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0a5c4c1a72ee4aede12703c2dd50057c47098e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464475
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This simplifies the UT code a little bit.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8aae0a8f0b0aa7e931ed4303b9504feabf76e2b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Data type of number of base bdevs are corrupted. uint8_t is enough
and unify almost all related variables into uint8_t.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I323aaa229a76c3d5b5361d7643c3a9591ccad340
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464357
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When this test was ran, it reported for each job:
"fio: verification read phase will never start because write phase uses all of runtime"
There was only randwrite phase, without any read phase with verification.
Alternatievly we can verify a set number of blocks during write using
"verify_backlog" argument.
With this patch writes to all bdevs will be verfied in 1024 chunks.
Change-Id: Ie79d543badd10f3b3ca91b3b56d9d8cb0dd332b2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
After recent changes, that function can not return
NULL anymore, so remove all redundant checks from
various SPDK libraries.
Change-Id: If80344b6fa81ad5f87a7086804dba221522cd7e2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix SC2007: Use $((..)) instead of deprecated $[..].
SC2007 removed from check_format.sh exclude list.
Change-Id: Ifd858857e461d785d6d6f101acca13c326ee637e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removing parentheses around if condition.
This unnecessarily spawns a subshell.
Removing SC2233 (Remove superfluous (..) around condition)
from check_format.sh exclusion list.
Change-Id: I0a4c266667264220a898ce80f587ae61bc113821
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixing errors reported by ShellCheck:
SC1009: The mentioned syntax error was in this if expression.
SC1073: Couldn't parse this test expression. Fix to allow more checks.
SC1019: Expected this to be an argument to the unary condition.
SC1020: You need a space before the ].
SC1072: Missing space before ]. Fix any mentioned problems and try again.
Removing mentioned errors from check_format.sh exlusion list, as
all of these errors should be tested for regularly.
Change-Id: I19402baba7bb8e59ed707de97133bd0a579333cf
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fix shellcheck styling error SC2006. Use of backtics is deprecated
and dollar-parentheses are encouraged instead.
Removing SC2006 from check_format.sh error exlusion list.
Change-Id: I8ef9d782839ff4361386720c39a28e449b5efab9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Connections will soon be assigned to poll groups, which will be
dynamically moved between CPU cores based on load. It no longer makes
sense to restrict certain portal groups to specific cpu cores in this
model.
Change-Id: Iee983d75febc9797aa60021c5bc0680335e895cd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463358
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function and the calls to it were mismatched. Make the function
calls correspond to the name of the function.
Change-Id: Iac4604fee3435621239fab2be8b0d86db926c87c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't require these to be numbered.
Change-Id: I385f579b41d24eea02e157e53c4fc1530864bb5b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Making this explicit makes the tests clearer
Change-Id: I6c37f873683b38b644bebc42532694d45a181d04
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are upcoming simplifications where it will be
better if these are two separate steps.
Change-Id: I618f947dc314b05a4f94ea98c63fe85539544704
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The "-s" causes ERROR printing, because it has been deprecated.
So I modify it to equally functional "-z".
Change-Id: I9c34bd98fef2c2bd346d288b6a20338be02382f5
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
spdk_sock_group_poll() and spdk_sock_group_poll_count() had returned
0 on success. The implementation didn't match the specification
described in the header file, and couldn't be used to collect stats
correctly because 0 means idle.
This patch fixes the return value of spdk_sock_group_poll() and
spdk_sock_group_poll_count() to return number of events and
the callers not to overwrite the return value by 0.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e2a17187fc74ea44d3acf2f35d63f5e5a254eda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Will execute short run per patch, longer nightly. This
path only covers the ISAL PMD as there are QAT upgrades
needed in CI. It does so by using the new 'perform_tests'
RPC in both bdevio and bdevperf.
Change-Id: I93afda336d7411b695b2ddd0332cce0050d075a4
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455113
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added test for enabling VMD with
enable_vmd RPC.
Change-Id: Ic5eac746409bf2e8dbdf42bda87b223d7bbc2150
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459950
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Before this patch scripts/docs based on tip of 19.04 VPP stable branch,
because VPP 19.04.2 was not yet released at the time of implementation merge.
Now that VPP 19.04.2 was released, we change to actual release tag.
In order to prevent using untested commit, if new patches were to be merged
on top of VPP 19.04 stable branch.
Change-Id: Id3584a13c48eba25b061ae7a6fc51e477a6425c5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- New files and updates to existing SPDK files to add the NVMf-FC transport.
- Depends on an existing low level driver library. This driver is not part of SPDK repository.
- Makefile updates to build FC transport (using CONFIG_FC)
- Update configure script for FC build.
- New FC unit test for FC-LS commands.
- Update unittest.sh to run FC unit test (when built).
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: If31d4d25feab76c2dbe90a7faf71d465c2c3a354
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Phenomenon:
Test case: Using the following command to test
./test/nvmf/target/shutdown.sh --iso --transport=tcp
without this patch, it will cause coredump.
The error is that the NVMe/TCP request in data buffer
waiting list has "FREE" state.
We do not need call this function in
spdk_nvmf_tcp_qpair_flush_pdus_internal, it causes the
bug during shutdown test since it will call the function
recursively, and it does not work for the shutdown path.
There are two possible recursive calls:
(1)spdk_nvmf_tcp_qpair_flush_pdus_internal ->
spdk_nvmf_tcp_qpair_process_pending ->
spdk_nvmf_tcp_qpair_flush_pdus_internal ->
>..
(2) spdk_nvmf_tcp_qpair_flush_pdus_internal->
pdu completion (pdu->cb)
->..
-> spdk_nvmf_tcp_qpair_flush_pdus_internal.
And we need to move the processing for NVMe/TCP requests
which are waiting buffer in another function to handle
in order to avoid the complicated possbile recursive
function calls. (Previously, we found the simliar
issue in spdk_nvmf_tcp_qpair_flush_pdus_internal for
pdu sending handling)
But we cannot remove this feature,
otherwise, the initiator will hang for waiting the
I/O. So we add the same functionality in spdk_nvmf_tcp_poll_group_poll
function.
Purpose: To fix the NVMe/TCP shutdown issue.
And this patch also reables the test for shutdown and bdevio.
Change-Id: Ifa193faa3f685429dcba7557df5b311bd566e297
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462658
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a match test for vhost_target show_details method.
In spdkcli source the equivalent function is `UIVhostTargetObj.show_details`.
This method is one of few that left untested in spdkcli.
This patch is related to trello task:
https://trello.com/c/CHOOxcGj/151-spdkcli-extend-test-coverage
Change-Id: I3747b0bef4a54606765c81a003bbc9e12fe32858
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If available, if not use the bdev unique name. This results in
a much friendlier comp_bdev naem for the user. For example,
now it would look something like this: COMP_lvs0/lvs as opposed
to like this COMP_0b149b31-b66b-4cf7-ab39-a55b50788cd1
Change-Id: I319a141221ed8880edcec930ca5be9f256b105e0
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rust lang has notion of empty value `()` which is translated to json null
value using serialization library like serde. Thus it means that jsonrpc
methods having no parameters translate to parameters with null value (as
opposed to a request without parameter member as it is done now in spdk).
This change handles null parameter gracefully instead of returning an
error - improving interoperability with such clients.
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Change-Id: I8c3cc5613582aebb10ac6eaee3ac4e6538aaa0b1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463171
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_ut.c:1300:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
Change-Id: Ie87cd4d7218a380e61616a83f3a9bceccc0798cb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_ut.c:1863:2: warning: Potential leak of memory pointed to by
'histogram'
poll_threads();
^~~~~~~~~~~~~~
We used to free g_histogram instead of histogram. Those
should be the same thing, but scan-build gets confused.
Change the code to free histogram - this should also make
it slightly easier to read.
Change-Id: Ifaad1c2d9c7f9cc1a106f6edf3d22b54e42fe867
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds non-volatile cache to some of the test configurations if
required device exists in the system (regular NVMe disk with separate
metadata support).
Change-Id: I0ea43990b360712361f34aeeb1982755f48b4dc5
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test requires openstack to be installed to use it
with spdk target. Also one nvme disk is demanded.
Following steps are taken in run_openstack_tests.sh script:
1. Run spdk target and create lvol store.
2. Restart cinder service to connect with spdk target.
3. Run some tempest tests.
4. Destroy lvol store and close spdk target.
Change-Id: I8c7b7dea3232a5eab1b8a4b96f26cf42ba45e02c
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457301
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates net/vpp implementation from version VPP 19.01 to
VPP 19.04.
1. Some binary APIs are deprecated in 19.04 and message queue is used
to handle control events:
- vl_api_bind_sock_reply_t_handler by SESSION_CTRL_EVT_BOUND,
- vl_api_unbind_sock_reply_t_handler by SESSION_CTRL_EVT_UNLISTEN_REPLY,
- vl_api_accept_session_t_handler by SESSION_CTRL_EVT_ACCEPTED,
- vl_api_connect_session_reply_t_handler by SESSION_CTRL_EVT_CONNECTED,
- vl_api_disconnect_session_t_handler by SESSION_CTRL_EVT_DISCONNECTED,
- vl_api_reset_session_t_handler by SESSION_CTRL_EVT_RESET
2. Fixes for Fedora 29/30:
- added "-Wno-address-of-packed-member" (DPDK 19.02 fails to compile
with gcc9.1),
- force "-maes" compile flag for gcc9.1 to compile crypto_ia32 and
crypto_ipsecmb plugins (gcc9.1 doesn't do that for -march=silvermont)
- some minor fixes
3. Default path for VPP instalation is changed for test scripts from
/usr/local/src/vpp to /usr/local/src/vpp-19.04 to avoid VPP version
conflict.
Change-Id: I1d20ad7f138f5086ba7fab41d77d86f8139d038e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459113
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When individual tests were run with --iso --transport=tcp, the
check_ip_is_soft_rocefunction incorrectly marked the loopback ip address
as soft_roce due to 'lo' matching with a notice message from the rxe_cfg
config command "module rdma_rxe is not loaded". Instead, grep
specifically to make sure that the argument we are matching against,
which is supposed to be an rxe interface name, contains rxe.
rxe interfaces are numbered sequentially as rxe0 rxe1 . . . rxen
Change-Id: Ibe8afb3e038e104173eb1e2bbf671ce9f417ffeb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a match test for vhost_ctrl show_details method.
In spdkcli source the equivalent function is `UIVhostCtrl.show_details`.
This method is one of few that left untested in spdkcli.
This patch is related to trello task:
https://trello.com/c/CHOOxcGj/151-spdkcli-extend-test-coverage
Change-Id: I4f13f863bdc815430c5fb2b67b12056f01201f8c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add spdkcli command that will invoke set_coalescing method
during vhost test.
This is the only usage of set_coalescing in our tests,
so it would be nice to at least have an invocation of it.
Following commits will add a match-test that will check if
set_coalescing worked as expected.
This patch is related to trello task:
https://trello.com/c/CHOOxcGj/151-spdkcli-extend-test-coverage
Change-Id: I15f54d92c4af2cf3f400743425e268b3645a5b3c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Arguments for this function were added as optional arguments
and were listed as such by argparse when using rpc.py --help.
This is confusing as all of these arguments are obligatory
in order to create a crypto bdev in SPDK configuration.
Change-Id: I7c31413314f28e44ee008d3d7c28759063700b61
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was inconsistent on all CU_ASSERT macros,
so now it is fixed.
Change-Id: I6d20f98528c4041baf02cb419ab9644a45b807c4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For kernel-* mode do not use mounted nvme disks for tests.
This was not checked previously and could result in losing
all data on NVMes not meant to be used in test.
Change-Id: I336c95b8e79e2592897c6b354e5a20a9c86f1482
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently json tests try to remove NVMe controller for
each NVMe bdev, but with NVMe that has multiple namepsaces
it actually tries to remove same controller multiple times.
This patch fixes that issue.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I555cb2a9aa78fd4cc700ddda0f5c1026329a2d3a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Initiator can use `nvme discover` command to display all
the subsystem's information, because we don't check
the allowed HOSTNQN for Discovery service, so here
adding this feature so that only return the log pages
to the allowed hosts.
Fix issue #576.
Change-Id: I51e6770bd67ea0b41caf9de3a8899923377e6255
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Detected by scanbuild, but it's actually a programming
error. It could make the failed test segfault instead
of cleanly printing the total number of failures.
Change-Id: I12f4bc2b1ccd2034251c1840381875d51708c6fb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Scan-build thinks we do TAILQ_REMOVE on an element that's
not in the tailq. Add fatal asserts to prove it wrong.
Change-Id: Ie5d999c2772d42e471cd4c9a11a6f3d2125cb0bc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462870
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
AIO bdev works on any file available from kernel.
blockdev.sh is the only palce that uses the ramdisk
in the current autotest.sh.
After removing the /dev/ram0, aio bdev still gets tested
with regular file.
Note: the QoS functionality done on AIO0 still gets
tested in usual qos.sh tests.
Change-Id: I8d219206d49626582d5848239fb0c36b25ef92a1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
