Rather than storing nvme_payload::type explicitly, use the SGL reset
function pointer as an indicator: if reset_sgl_fn is non-NULL, then the
payload is an SGL type; otherwise it is a contiguous buffer type.
This eliminates the one-byte type member from struct nvme_payload,
making it an even 32 bytes instead of 33, allowing the removal of the
awkward packing inside struct nvme_request.
Change-Id: If2a32437a23fe14eb5287e096ac060067296f1dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The definitions of these macros will change in an upcoming patch that
modifies the way nvme_payload is laid out.
Change-Id: Ic6edc18928542b07be7519a72bdbf6babbeb0131
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will simplify upcoming patches that change the way nvme_payload
stores its type.
Change-Id: Idf0a5b8dfd7d66a10f89254d2c5c54fee2968a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413173
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When IO is finished SPDK will trigger callback at controller layer,
while here, wrapper the completion callback into a function so
that we can add error injection at this function in following patch.
Change-Id: I7b7a6d278d87fd09a05f51f688398fdf2e9c4e05
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411630
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the same reason as commit 31bf5d795e ("nvme: make timeout function
per process"), the AER callback also needs to be stored in the
per-process controller data structure.
Change-Id: I41425d81a2ab16c06ef9b900bef6a6128117fcb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410953
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9cfc237a8514a1d323313851e14576ba2ba69077
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/410529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used later instead of retrieving VS (potentially via a Get
property command for Fabrics) multiple times.
The Active NS List code was previously depending on the VER field of the
Identify Controller data, but this was only added with NVMe 1.2, so we
can't rely on it to detect NVMe 1.1 controllers; it is changed to use
the new cache VS value instead.
Change-Id: Iba9ed5ecbc82b4654973438d119daba0c4cf0724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
uint8_t is too small to handle huge payloads. 32M payload already
overflow this.
Change-Id: I083ba7d3ded25b99571d422b7a3a4e7653a8d231
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/408677
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e58baaeb09580b5f70e1acf5323376ca0b26bbf
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/407382
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I79dad84d1dc58e61eb36b461b41fbd7ee73631fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function retrieves the UUID from a namespace, if available.
Change-Id: I98c55375948b92eaf429b41fb36dfea4e2b780a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Convert nvme_ctrlr_cmd_identify_controller() and
nvme_ctrlr_cmd_identify_namespace() into a single function,
nvme_ctrlr_cmd_identify(), with generic parameters that should be
suitable for all current callers as well as future users.
These functions were internal-only, so there is no public API change.
Change-Id: I3dbb3e6b00308b67ba1f161f8a6b11b6333fca57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few places were accidentally storing namespace IDs in uint16_t.
Change-Id: Iae9d709fb20bc1ac0a584ccd9683b721ce5de961
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403886
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
adding nvme_ctrlr_destruct_finish because nvme_transport_ctrlr_destruct may
use a destroyed mutex.
nvme_ctrlr_destruct() free "ctrlr_lock" and after that call
nvme_transport_ctrlr_destruct()->nvme_pcie_ctrlr_destruct()(with pci)->
nvme_ctrlr_proc_get_devhandle()->nvme_robust_mutex_lock(&ctrlr->ctrlr_lock);
Change-Id: I55714ea9097d2c9d844a00b5a88fa2d51a3f4469
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Reviewed-on: https://review.gerrithub.io/399605
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
NVMe specification 1.3 added a new Admin command: Doorbell buffer config,
which is used to enhance the performance of host software running in
Virtual Machine, and the Doorbell buffer config feature is only used
for emulated NVMe controllers. There are two buffers: "shadow doorbell"
and "eventidx", host software running in VM will update appropriate
entry in the Shadow doorbell buffer instead of controller's doorbell
registers.
Change-Id: I639ddb5b9a0ca0305bf84035ca2a5e215be06b46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/383042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only multi-process shared controllers should be inserted into the shared
list in g_spdk_nvme_driver. To accomplish this, create a second
per-process global list of attached controllers (g_nvme_attached_ctrlrs)
and rename the driver struct field to shared_attached_ctrlrs to clarify
its purpose. Additionally, a new helper function, nvme_ctrlr_shared(),
returns whether a given controller should be on the shared or
per-process list.
Change-Id: I46d4e558ece8b7fc3d28868e32bb56d794f21aab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Simplify the PCIe transport by using an existing function to look up a
controller by transport ID.
Change-Id: I261865df1ba23069b052ca64944b7637d70c85ba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388701
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each process should manage its own list of controllers that are
initializing; the list doesn't need to be shared between processes.
This is the first step toward preventing non-PCI controllers from being
added into the shared attached_ctrlrs list.
Change-Id: Ia6f85fe89e28a04f0950da5362bb2f49d1b76da9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a new parameter for the default ctrlr opts initialization.
This is to make sure future compatibility when SPDK components
are built as a shared library. User's version and SPDK's version
may be in different size.
The change here is to make sure the backward compatibility when
new fields are added in the struct spdk_nvme_ctrlr_opts.
Change-Id: Icfc9640993cb06063b825d4df5835d920dd374e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380846
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A random host ID is generated per SPDK application startup if the user
doesn't specify a host ID during controller startup.
This also changes the default host NQN for NVMe-oF connections to a
random UUID NQN based on the host ID.
Change-Id: Ib0f70dd63e53087716842b412a1f134a9991d4da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reason: In our default configuration, we use
nqn.2016-06.io.spdk:init
Change-Id: Ic840b41230f53d5d97166a38faf7c2109fa6b41a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/377463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Certain vendors do not report correct number of queues allocated in "Set Features/Number of Queues" completion CDW0 per spec.
As a work around, issue "Get Features/Number of Queues" and rely on the value provided there.
Change-Id: Ib9cc4dcf1bdb732413becc751883a7311c6f672f
Signed-off-by: Konstantin Vyshetsky <kon.vyshetsky@stellus.com>
Reviewed-on: https://review.gerrithub.io/375234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PAGE_SIZE is the host memory page size, which is irrelevant for the NVMe
driver; what we actually care about is the NVMe controller's memory page
size, CC.MPS.
This patch cleans up the uses of PAGE_SIZE in the NVMe driver; the
behavior is still the same in all cases today, since normal NVMe
controllers report a minimum page size of 4096.
Change-Id: I56fce2770862329a9ce25370722f44269234ed46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An optional field was added in NVMe 1.3 to indicate the optimal I/O
boundary that should not be crossed for best performance. This is
equivalent to the existing Intel-specific stripe size quirk.
Add support for the new NOIOB field and move the current quirk-based
code so it is updated in nvme_ns_identify_update().
Change-Id: Ifc4974f51dcd59e7f24565d8d5159b036458c6e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unmapped blocks on some older nvme devices will read zero even if the
device does not explicitly define the unmap behavior.
Change-Id: Ia825a406cbd01f89192c300cfe35013fb4aed715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372006
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The VirtualBox emulated NVMe device will intermittently
hang on the first read/write command after an I/O
qpair has been allocated. The frequency of the hang
diminishes if a delay is added after allocating the I/O
qpair - until it disappears completely with a 100us delay.
So add a quirk to insert this delay.
Note - the 100us delay was tested by running
the hello_world example app 50000 times.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I237e31b1b8a1a1e28262851ae0a21cd7345f0f1a
A 100us is so small that applying the quirk to the specific
SSDs that require the delay is more trouble than it is worth.
So remove the quirk and always wait 100us before re-enabling
the NVMe SSD during initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a8cc6e35d103fffdf135580301fc3e5b27e722
Queue aborts that would exceed the abort command limit
in software as a convenience for the user.
Change-Id: I8c1f0380984cc6c0cdb453db961939a7f571b336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It has been discovered that some devices require
a very small delay before writing CC.EN to 1 after
CSTS.RDY goes to 0.
Change-Id: I73d31726d17ebf5bbec7ee528e2f98fcd05234dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The actual uses of intrinsics are already guarded by feature-specific
ifdefs in nvme_pcie_copy_command(), but the header itself should also
only be included when it will actually be needed.
Change-Id: Ife65d6432b8dfd9d9db80fe4e385ab76491874c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For namespaces with end-to-end protection information, metadata size
of exactly 8 bytes, and extended LBA configured, the NVMe driver would
calculate the size of the data block incorrectly. The NVMe spec has a
special provision for this specific case (8-byte metadata only) and
PRACT = 1 that requires that the host does not send the metadata as part
of the host memory buffer.
To fix this, clean up the calculation of the per-block data transfer
size by adding a new extended_lba_size field in the namespace, which
represents the total size of data to be transferred per block based on
the namespace's configured metadata size and whether it transfers
metadata as part of the data buffer. Then add the special case for
PRACT = 1 and PI configured and extended LBA in the R/W helper
functions.
Change-Id: I0b383a58c773cac06e6c018858b57129064c6059
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The PCIe transport initializes the quirks directly, so the generic hook
to get PCI ID is no longer necessary. This path was dead code.
Change-Id: I25bdaa598db53e4312a264d9d8356d1b416696e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The logic to fail queue pairs when the controller is failed should be
handled in the generic code, not in the individual transports.
This also allows nvme_qpair_fail() to be private to nvme_qpair.c.
Change-Id: I6194576dceb35073b9af8847e59314900028637c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since nvme_ns_cmd.c now walks the SGL, some of the test code
needs to also be updated to initialize and return correct values
such as ctrlr->flags and sge_length.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I521213695def35d0897aabf57a0638a6c347632e
Now that the hotplug code is isolated in nvme_pcie.c, it can call the
PCIe transport attach function directly.
Change-Id: I2df3b9168473b537cc9b13367e06d3d3b6fa22be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spdk_nvme_qpair::num_entries value is never used in the common code,
so move it to the individual transport qpairs to make it clear that it
is a transport-specific implementation detail.
Change-Id: I5c8f0de4fcd808912ba6d248cf5cee816079fd32
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The definition of SPDK_UNREACHABLE uses the build-time DEBUG definition,
which is not available in the public API.
Change-Id: I1862c99fa5c85ccd3483f94e9c35de531da57f3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function initializes the members of an existing
qpair struct. It doesn't construct one from scratch.
Change-Id: I0b9afac1ad25cfb217efd146702f693c74f5f697
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the qpair construct functions private to the transports - it
doesn't need to be called from generic code.
Change-Id: I5f730a4bcf60ce231fe27bc8f4c3c39cb647dd2d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport callback to return the maximum queue size, and enforce
it in the generic nvme_ctrlr layer.
This allows the user to tell what io_queue_size was actually selected by
the transport via the ctrlr_opts returned during attach_cb.
Change-Id: I8a51332cc01c6655e2a3a171bb92877fe48ea267
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better describes what the field controls (it does not affect the
admin queue size).
Change-Id: I851ae46fb4ed0fce819af07ae235824e0fc817e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The other simplifications to probe_info and trid made the
trtype argument redundant.
Change-Id: Ie7bea4e2204e690dc4909eeacd065e0722b53272
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the standard quirk mechanism to specify which devices
need software assisted striping.
Change-Id: Id8156876a90b4caf9d687637e14c7ad4a66ceda6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Scanning the transport may result in both new
devices and removed devices, so pass the callback
for both operations.
Change-Id: I6f73dbe6fd7cf61575c354b43f8ae3e2a01e2965
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Simplify the arguments to nvme_transport_ctrlr_scan to take
a transport id that identifies the discovery service (or
NULL to scan PCIe).
Further, separate scan into two functions - scan and attach.
Scan is for scanning an entire bus, attach is for a specific
device.
Change-Id: I464f351a02a04bc5a45096dcf5dc8fc5ac489041
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a small step toward making discovery more like
scanning a local PCI bus.
Change-Id: Ie7149ad060f2eeb56939b1241187bdf09681f2aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It's not the whole transport - it's just an enum for the
type of transport.
Change-Id: Ia435a21792f221ddf50ddf4f0923c6152622eccb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This version of multi-process support needs to have DPDK 16.11 builtin.
Change-Id: I3352944516f327800b4bd640347afc6127d82ed4
Signed-off-by: GangCao <gang.cao@intel.com>
Allow the host NQN to be overriden when connecting to NVMe over Fabrics
controllers.
Change-Id: I8fcf2e89ae7d9722677e834f76a8fe805c52f91b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each transport should handle its own qpair cleanup internally.
Change-Id: I7dd737be820ea6bad686f4aad7d74044fad58a47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Let the transport access the controller options during
ctrlr_construct().
Change-Id: I83590c111e75c843685dd9315f0f08416168356d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the NVMe over Fabrics spec definitions for TRTYPE rather than the
internal library transport type.
Change-Id: Idead559a8f8d95274fc580d10e82033822e6eda8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Considering the process can be terminated in the cases like ctrl+c,
kill command or memory fault, the ref is tracked in the per process
structure spdk_nvme_controller_process and whenever there is other
process attaches or detaches the controller, a scan will be issued
to cleanup those unexpectedly exited processes.
Change-Id: Ib4f974f567a865748d42da4ead49edd383dfc752
Signed-off-by: GangCao <gang.cao@intel.com>
Function pointers will not work for the DPDK multi-process model (they
can have different addresses in different processes), so define a
transport enum and dispatch functions that switch on the transport type
instead.
Change-Id: Ic16866786eba5e523ce533e56e7a5c92672eb2a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
