Partially decoded request need to be free even if
spdk_json_decode_object() fails.
Change-Id: I72127c484636547fcf1389af232dab855622c69a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439372
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add an new RPC to get current authentication group configuration.
This patch is utilized in the next patch to support JSON config dump
for authentication group configuration.
Change-Id: I34be9e196f8e7a484bcd316da54f05d0f6ee0300
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add RPCs to add/delete a secret to/from an existing authentication group
dynamically.
Use mutex to ensure exclusive access to CHAP secrets.
Tries to use descriptive message in RPCs when error occurs.
Change-Id: I59650ae11a2fe675d03b90bbd4d2dc5b9c0160ed
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds new RPCs add/delete_iscsi_auth_group to add and
delete authentication group dynamically.
Mutex is added to ensure exclusive access to CHAP secrets.
Additionally provide descriptive message in RPC when error occurs.
Change-Id: Iaddfbdd5688ca7907d2c7d859835faa056deecd1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An new RPC set_iscsi_target_node_auth enables users to configure CHAP
authentication for the target node dynamically.
New setting is used for new iSCSI sessions. For existing iSCSI sessions,
new setting is not used until user logout and login again.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I0bd40d92262d708c1f7de0effb208078bdf8cc41
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An new RPC set_iscsi_discovery_auth enables users to configure
CHAP authentication for discovery sessions dynamically.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I8883d5e054539cf6db091a5b79d0479e62119811
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is a pair to the following
- subsystem/iscsi: Add set_iscsi_options RPC to set global params
Now options can be loaded from JSON config file.
Change-Id: Ifb68cddbb045d51fbaf8161ad59ede9d399e70cb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410874
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Support JSON config/info dump for portal group. These are added to
portal_grp.c. Text config dump is moved to portal_grp.c.
Add accesses to g_spdk_iscsi.pg_head are consolidated into
portal_grp.c to extract pg_head from g_spdk_iscsi.
Change-Id: I8c551b067c68a785eb0c7d83d695bde5f7219c2b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support JSON config/info dump for initiator group. These are added
to init_grp.c. Text config dump is moved to init_grp.c too.
Add accesses to g_spdk_iscsi.ig_head are consolidated into
init_grp.c to extract ig_head from g_spdk_iscsi.
Change-Id: I88131d248ed13e42e4da56aed8ae0edc01a65715
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support JSON config/info dump for target node. These are added
to tgt_node.c Text config dump is moved to tgt_node.c too.
All accesses to g_spdk_iscsi.target_head are consolidated into
tgt_node.c to extract target_head from g_spdk_iscsi.
Change-Id: Ibdf57c6ec9457d762c5640483b5810c9a74604ef
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add state_mask to each RPC method and state to RPC server, respectively.
State mask of RPC method is set at registration. State of RPC server
is changed according to the state of the SPDK.
When any RPC method is recieved, if the bit of the RPC server is on in
the state mask of the RPC method, it is allowed. Otherwise, it is
rejected.
When any RPC is rejected by state_mask control, the new error code
is returned to describe the error clearly.
Change-Id: I84e52b8725a286e9329d61c56f498aa2c8664ec1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407397
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For the CHAP setting of iSCSI targets, JSON-RPC handles the
value of parameters directly and dump of iSCSI targets can be
used to construct directly.
For the CHAP setting of iSCSI discovery session, the same manner
will be applied.
Change-Id: I8731af4273cc89ee5c4ea2f97955e56e3bff202d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/401076
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently CHAP parameters for discovery are handled as bool but
they are defined as int. Hence change their type from int to bool
as done for target node previously.
Change-Id: I1e815946d4bdececcdd7cc873a725afbbcb98e50
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Change-Id: I44348ec404cae8882086a1a71a65914c9bafccc3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
JSON format of bdev_name_id_pair is different between
construct_target_node() and get_target_nodes().
construct_target_nodes() uses the following format:
"lun_ids": [
1
],
"bdev_names": [
"Malloc0"
]
get_target_nodes() uses the following format:
"luns": [
{
"lun_id": 0,
"bdev_name": "lvs_1/lbd_1"
},
]
The second format is better than the first format. Hence unify to
the second format.
Change-Id: If097e41ada0f2fe3754691cee0a0774db97c4ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399993
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the following JSON-RPC:
1) get_target_nodes
2) construct_target_node
3) add_pg_ig_maps
4) delete_pg_ig_maps
JSON format is not unified yet.
1) uses the following:
"pg_ig_maps": [
{
"ig_tag": 1,
"pg_tag": 1
}
2), 3), and 4) use the following:
"ig_tags": [
1
],
"pg_tags": [
1
],
the first format is better than the second format. Hence unify to
the first format.
Change-Id: I6cc19115001b9c9ba9db5c87db1def7c0b3bd80c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is a preparation to match response of dump with request
of construct (load).
Change-Id: I08d0e860ecd842fabf2bbea0b888a60ffd51b055
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399992
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Adding new initiator to an existing initiator group to allow login
will be usual. This patch support the following JSON-RPC commands:
- add_initiators_to_initiator_group
- delete_initiators_from_initiator_group
Both initiator's name and netmask are optional but already added
name or netmask cannot be added.
Test code is added too.
Change-Id: Ic101210b9d00c2b36e37ece23fcba8cfe8e44eb8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/398361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Checking uniqueness of initiator group is done without mutex and
before register/unregister. This is not thread-safe.
This patch is a preparation to dynamic addition of initiator
information to existing initiator groups.
Change-Id: I44f48c857210522eee70d14bc3735ec73b0c5c6f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/397032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Orderings of portal group create operation are diferrent between
config file and JSON-RPC. Unification is necessary for correct
concurrency control and the global accept poller like NVMf-tgt.
Hence unify the ordering of operations in this patch.
Common ordering of portal group create operation between configuration
file and JSON-RPC after this patch is the following:
- create a portal group
- create portals
- add the portals to the portal group
- open the portals of the portal group
- add the portal group to the global portal group list
After this patch, the gap between listening socket and accepting socket
will be increased a little when portals groups are creted by config file.
However this will cause no issue because of the TCP backlog and resend
mechanism.
Besides, necessary concurrency control is added and minor refactoring
is done.
About portal group delete operation, orderings of application shutdown
and JSON-RPC are already unified.
Change-Id: I1db7ef4400388127134d7734c68e138a4573b734
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Checking uniqueness of portal group is done without mutex and
before register/unregister. This is not thread-safe.
Hence this patch is added to ensure PG uniqueness.
A little related refactoring is also done.
Change-Id: Iaa3b5e380f2be5cfdaa2d69f9f2763c98954b0c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396847
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To use JSON dump of iSCSI global parameters as configuration file,
at bootup, it must have completeness.
This patch fixes the following:
- DefaultTime2Wait was not contained.
- MinConnectionsPerCore was not contained.
- Converting only 0 to "None" for dump is not efficient.
Change-Id: I740e6938c216c5c62df6ee70b0ceac40fd0cac00
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396100
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Currently setting cpumask to portal is possible only through
iSCSI.conf. This patch makes possible for any user to set cpumask
through JSON-RPC too.
The following are done in this patch:
- To keep compatibility, cpumask parameter handled as optional.
- Python test code is added.
- Current python script for JSON-RPC does not work correctly for
IPv6 and the issue is fixed.
Change-Id: I42ef397ce95040a36db4430417a35e9e97527477
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This concept was added very early in the SPDK iSCSI target
development process when there was a high focus on maximizing
throughput on a single iSCSI connection with 512-byte reads.
Realistically, in multi-connection environments focused on
predominantly 4KB (or more) workloads, this concept loses its
effectiveness - it is relatively rare that PDUs from multiple
I/O would coalesce within the default 8us flush timeout period.
There were no users of flush timeout in the SPDK tree - it was
not even documented in the iSCSI configuration file example and
there was no way to modify it at run time. So leave the change
out of the CHANGELOG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c3e959fb3945dc2c9cb89248305d0c88aa778f
Reviewed-on: https://review.gerrithub.io/395520
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently cpumask cannot be specified for each portal when it is
created by JSON-RPC and portal group creation is not unified
between iSCSI.conf and JSON-RPC.
This patch does the following:
- cpumask string is decoded in spdk_iscsi_portal_create() which
is common between iSCSI.conf and JSON-RPC.
- parsing configline of portal is difficult to understand and
hence it is refactored.
- UT code is added.
JSON-RPC will be added by the next patch.
Change-Id: I13b9989263fae5facff260de32a55ec99f5d5a06
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch makes possible to set and get Header Digest and Data
Digest of target.
Change-Id: I1d1b892f9dfb747c0f5ad8fc4fddef40929b4143
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394482
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add JSON-RPC to add an LUN to an existing target. The parameter
lun_id is optinal and if skipped, the lowest free LUN ID will be
assigned.
This JSON-RPC is tested in iscsi_tgt/rpc_config.
Change-Id: I010619f2d4ccec89c589bb0618466b4d15949ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to keep a lun name anymore - we always
use the bdev name as the lun name so it is not providing any
additional value. This also keeps us from associating
the same bdev with different LUNs on different iSCSI target
nodes or vhost-scsi controllers.
Side effect of this change is:
1) Use "bdev_name" across the APIs to make it more clear
what these names refer to.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d42fde22087352ce1d5dc80178bd8c5cac8cb7c
Reviewed-on: https://review.gerrithub.io/390843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently the default setting of cpumask of network portal is
different between iSCSI.conf and JSON-RPC.
When a network portal is created by iSCSI.conf, its cpumask is
set to all available CPUs by default. However when it is created
by JSON-RPC, its cpumask is set to 0 by default.
Auto test 'test/iscsi_tgt/idle_migration creates a network portal
by JSON-RPC. Hence the auto test cannot test the load balancing
function of iSCSI target.
Change-Id: I2685172cb9259b643f6d18d4660a8425dcef3f5d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391898
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
SPDK does not provide casual way to get iSCSI global parameters
set by iSCSI.conf. Hence test/iscsi_tgt have to use hard-coded
value for iSCSI target's nodebase.
NVMeOF provide similar JSON-RPC dump_nvmf_subsystem().
Change-Id: I1a53572f707e83cfd18369475b2565c6390a4d2d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Based on the PG-IG map tree implmentation, the following new
JSON-RPC commands are supported:
- add_pg_ig_maps
- delete_pg_ig_maps
Change-Id: Iebc48e379aa8e06b5e7d57935845d6fd53f7f826
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379936
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is a preparation for dynamic reconfiguration of PG-IG maps.
Current PG-IG map is implemented by a fixed-size array. Linked list
will make much easier to support dynamic reconfiguration of PG-IG maps.
Current:
target - (1..n) ---> PG_map (1..1) -> PG
|
--> IG_map (1..1) -> IG
This proposal:
target - (1..n) -> PG_map --- (1..1) -> PG
|
-- (1..m) -> IG_map - (1..1) -> IG
Change-Id: I92f668b81cdd8003aff222926f8f1ed96b61e56d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385532
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Current fixed sized array for iSCSI target is not thread safe.
When newly created targets are inserted into the array, multiple
targets may be inserted into the same position. Linked list is
better than fixed size array to support dynamic reconfiguration.
Change-Id: I4db5a3ec16844db06e0cfcd2aef1f97952f15afa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To add initiators to an existing target, manage name and netmask
of initiator group by linked list. It is not easy for array to
detect duplication and change configuration.
Change-Id: Id9e77740e24ac309a33d8de1be37663681160d94
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Group the code fragments of add/delete name and mask of initiators
and create spdk_iscsi_init_grp_add/delete_initiators/netmasks()
functions. Memory alloc/free is done in these functions.
Change-Id: I40f2873c5336a05813c0e34797c109386eda4229
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381246
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This function was only useful for old (and incorrect) iSCSI
topology with SPDK. Hence this function can be removed.
Change-Id: I6147382b0731a896df3c988fae0173923a9a85fc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381242
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Check duplication of registration of portals by using a global
portal list
Change-Id: I608fc9bd4473c11e69686e6474892f3f4272cd53
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379929
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function was only useful for old (and incorrect) iSCSI topology.
Hence this function can be removed.
Change-Id: I1898f6a5fbffd27a55904a55cd137dafbbdf5946
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381241
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
All strings decoded by spdk_json_decode_string() need a corresponding
free() statement.
Change-Id: I5896eada11deed791c5f1579db992aa382e02f82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373404
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable was misleading and unnecessary. Replaced all it's
occurences with SPDK_SCSI_DEV_MAX_LUN.
Change-Id: Iaaf9ed5efb60f9a89585121d2fbec7b43c3723e9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will enable asynchronous request handling in a future patch, and it
also removes the need for the RPC handlers to know about request id and
the JSON-RPC rules about notification-only requests.
Change-Id: I25aaa8e48bff8d5594ffcccecb61842b1e31ec3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The contents of struct spdk_scsi_lun don't need to be part of the public
API.
Change-Id: I101b77871054557380610fd901ab38bada463202
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Changed spdk_iscsi_portal_grp_create_from_portal_list so that it fails
if any given portal is invalid.
Change-Id: I708621a538a52abfed4dce01668d26602a5ada59
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Fixed double free in spdk_rpc_add_portal_group()
spdk_iscsi_portal_create() now takes string arguments as const char* and makes internal copies of them.
This patch also fixes potential memory leak when id == NULL
Change-Id: I4d0efb101471fb2368ceb8ceecb0e40614e3585d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
