The command can be allocated on the stack safely instead.
Change-Id: Iab412e91c1a06f80f1d86d7f9a6d88be2a759b09
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406859
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib88b797da168290ac07564cae46e544cb037f575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406672
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The uuid string was not freed. Factor out the free() calls into a
helper function and add a free of uuid.
Change-Id: I2f5f794e240fcdb07f346b892ea4dec46dc9bdb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406665
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie60989f157d20119dd24488688d527f607b585f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406660
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It was called module_ch and shared_ch throughout the code.
The name module_ch is better, so use that everywhere.
Change-Id: Id030f72c878f44ea4dc8ca14b936719e26e891e3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406825
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few small changes for readability and one changed examine
error returns to breaks to assure examine_done() is called
in those cases.
Change-Id: If21ecdfa9ce1d6dbeeff4ced4e73425cec5940e1
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/406818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To support resize operations during I/O, we will need
to send messages to each thread to quiesce I/O while
the resize operation is in progress to guard against
the cluster map memory changing while another thread
is accessing the cluster map.
Therefore, spdk_blob_resize needs to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida037334739b4b80a1dbc76e8f1c70bca8b73582
Reviewed-on: https://review.gerrithub.io/404616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This must have been overlooked before.
Change-Id: I631c7b926970d045e9e91cada535acd605e05b6e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/406334
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
by placing the destroy function in the callback of the
io_device_unregister, we ensure that all channels associated with a bdev
will be freed before the bdev is destroyed. This eliminates the
possibility of an io_channel callback referencing a destroyed bdev.
Change-Id: I0dd6f53dcfa9c9c5a3c6e98a7e2ad8687da17c3f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/406248
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Split bdevs now can be create using "create_split_bdev". To keep
backward compatibility, this call will not fail if base bdev is not
available yet instead will add base bdev name to its live configuration
and create splits when base bdev will be created (during examin
process).
Change-Id: Ie26ffc0e947f6d88ff56830dd50999795283df2e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/404164
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For application like vhost/iSCSI target/NVMe-oF target/etc,
a new section as below can be added for the QoS rate limiting.
[QoS]
Limit_IOPS Malloc0 100000
Limit_IOPS Nvme0n1 500000
Also added a sample change at test/lib/bdev/bdev.conf.in
Change-Id: I7c7d951fbe1352ca2571f135c657bc4fa43b56c7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393221
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
As there is no I/O channel associated with the QoS
bdev channel, add the specific functions to handle
the reset operation on the QoS bdev channel. The
reset operation will be conducted on the QoS thread.
Related UT code on QoS with reset operation was also
included.
Change-Id: Ibba68ddb132fa926fec6327829157b43ac806713
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently construct_error_bdev() fails if the base bdev doesn't exist.
This patch add configuration of the error vbdev for the base bdev instead,
and the configuration will be parsed at examine() when the base bdev is
created.
This will improve the usability of error injection for bdev and will be
usable for the upcoming JSON config file.
Change-Id: I550b7f6c74fd8ab6cbd424a192f12a0c0099028e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403914
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The long-term plan is to use the JSON-based configuration format, but
for now, we need a config file section to be able to test a bdev module
in blockdev.sh.
Change-Id: I2a69f7172693ed6d4939a3b938747e2a1c62ff83
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405908
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By this we are abble to produce proper RPC config in next patches.
Change-Id: I1ae9e81bf50bc4fb5e6a9cf7bf9b84df7e6377d1
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/403842
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of accessing the qos_channel pointer on the bdev,
always have the QoS parameter on the allocated memory of
qos_channel structure.
The bdev->qos_channel is set to NULL in the destroy operation,
and the destroy is through the async message which could
be executed later after the poller function within which
the bdev->qos_channel is accessed (thus a NULL pointer
dereferenced).
In this case, assign the memory address of the allcoated
qos_channel to the function as the parameter to solve
this issue.
Change-Id: I2fdb53cb0a6a29fb41ab28362f8e068d21ee5d12
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/405438
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is a call to spdk_bdev_close () during spdk_bdev_part_base_free
(). This will trigger spdk_bdev_module-> module_fini () if this is the
last descriptor to the last bdev. In module_fini () resource might be
freed. But then, after spdk_bdev_close(), call to base_free_fn () is
done which may try to free the same resource again.
To avoid this, call spdk_bdev_module_finish_iter () after
_spdk_bdev_finish_unregister_bdevs_iter () return.
Change-Id: Ia6eb210504d121772221da18651a90ffc89dbbc4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405322
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
SPKD base bdev might be part of multiple vbdevs. The same is true in
reverse direction. So consider folowing scenario:
bdev3 bdev4 bdev5
| | |
+-+--+ + +--+--+
/ \ | / \
bdev0 bdev1 bdev2
In current implementation bdev0/1/2 will apear as base base for
bdev3/4/5 which is obviously wrong.
This patch try to address this issue.
Change-Id: Ic99c13c8656ceb597aba7e41ccb2fa8090b4f13b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405104
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Listing them through get_bdevs is not enough. Some
devices might not have any LUNs presented while expecting
some to be hotplugged in the future.
```
$ rpc.py get_virtio_scsi_devs
[
{
"virtio": {
"vq_count": 18,
"type": "user",
"socket": "/tmp/vhost.0",
"vq_size": 512
},
"name": "VirtioScsi0"
}
]
```
Change-Id: I56857d7a0637300beba39a8d83a98447f1f74ce7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405182
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove configuration of an error vbdev at the removal of the vbdev.
This will lose the strict compatibility but the next patch will make
possible for us to add the removed config dynamically.
This patch will make the implementation cleaner and will not lose
any usability.
Change-Id: Idea7767ab5424427f912c82c66ff7d59d28108ab
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403915
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The malloc and null bdevs generate a random UUID if it is not specified
in the construct RPC method; save the current UUID in save_config so we
can reproduce it in load_config.
Change-Id: Iabaa96fa3129189ae6acf3635345b98f71255fbd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405110
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, device removal is now always deferred to simplify
the locking.
Change-Id: I6b994531630b64860da728a93a0f2d613d8aa5ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each device was being removed from the tailq twice.
virtio_scsi_dev_remove does the removal by itself.
Change-Id: I2320fc88ac60ddd5952b07b26c679c8f2e887976
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
g_virtio_driver contained just a list of all
Virtio-SCSI devices. It's now being removed for
two reasons:
* it's backend-specific, doesn't fit a generic virtio lib
* it's difficult to ensure thread-safety for it
Virtio bdev modules will now manage their Virtio
devices by themselves. Virtio-SCSI has now an internal
device list. (And VirtioBlk module maps devices to
bdevs 1:1, so doesn't need any additional work here.)
Change-Id: I3bc68d76d6904df5c56f00fca7ab387871ecf88f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405179
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is not needed - we can easily get the number
of clusters from the underlying blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94a716731bd1b8c4b333fe295bd5a963928b4330
Reviewed-on: https://review.gerrithub.io/404615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support the virtio RO flag, so that read-only devices
will successfully initialize now. Also do not allow
issuing any writes on a read-only device, so we don't
flood it with requests that are to fail.
Change-Id: I6b77f2338e4478a9abf2d5286344f6412d79284c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This uses libiscsi to implement an iSCSI initiator bdev
module for SPDK. Still a lots of work to do on this - posting
it in case anyone is interested in working on this further.
A number of todo items are listed in a README in the lib/bdev/iscsi
directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I060e33de0cd6796246789bf0e1bb4f2df59d8f71
Reviewed-on: https://review.gerrithub.io/390313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Example showing the basics of a vbdev via a module that implements
the main functions, and a few extras, needed for a vbdev. The tests
also demonstrate how to configure an application to use a vbdev and
an underlying bdev
Change-Id: I67bf542143eb6532465cdb6af63c0f2ab7084c0e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/399768
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch 583a24a4 [1] moved io_outstanding field to the
bdev_module_channel as it was needed there. This patch
re-adds another io_outstanding field to the bdev_channel.
We *do* want to count outstanding I/O for particular bdevs
- mostly for debug purposes.
[1] 583a24a4 ("bdev: share nomem_io data between bdevs built on the
same device")
Change-Id: I723e72c36447f9f778f88fc1769619676cbbaf71
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The version of ittnotify_static.c shipped with VTune Amplifier XE 2017
triggers the new GCC 7 -Wimplicit-fallthrough warning.
Change-Id: I8a43beddf464853407639742b1eb89bcac39136d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404211
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the handling of I/O completions that need to be sent as a
message so that they are handled in a single place in
_spdk_bdev_io_complete().
Change-Id: Ic94354ad947d0f1f11241f728aa194a105ff96c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404184
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Flip the status != NOMEM check around so that the logic is easier to
follow.
Change-Id: I607e8b5f0cfaa3598a623d0fc3642b11bd42decd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
vbdev_error_init holds config information and examine() uses it.
This patch is necessary to keep compatibility from the .INI config
file to the upcoming JSON config file (based on JSON-RPC).
Change-Id: I1601b7e0dad5f93662177c59536776afd974ff07
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the commonly-accessed fields to the front so they end up in the
same cache line where possible.
Also tweak the types of type, status, error.nvme.sct, error.nvme.sc,
error.scsi.sc, and error.scsi.sk (they can fit in 8 bits), and move the
Write Zeroes splitting variables into u.bdev.
This reduces sizeof(struct spdk_bdev_io) from 272 to 224, in addition to
the better cache line usage.
Change-Id: I4a91fd07f252e7add4a2db179df9c53268672198
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When vhost has sent too many events and the eventq
ring is full, the very next event will be sent with
EVENTS_MISSED flag set. Virtio after processing such
event should do a full target rescan to manually detect
all changes - this implies
1) hot-attaching targets that appeared, and
2) hot-detaching those that don't respond properly.
Virtio has been doing only #1 so far.
Change-Id: Ib8be986588913ad41296dcfd6558ff705b99007c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402120
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Virtio response codes other than OK, BAD_TARGET
or INCORRECT_LUN indicate an intermittent device/transport
failure and don't need to be handled by each message
response handler separately.
Change-Id: Iab0b03b3c7b377d2b346344c32e5df143df528b0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402119
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The helper functions were only needed when this was sent as a message,
but they are only called directly in the current code, so just move the
contents of the functions inline to their call sites.
The unregister path can also be simplified to pass the poller directly
to spdk_poller_unregister(); it already handles the case of a NULL
poller.
Change-Id: I509cf8922b53e1e616c9e976610b20061bb50066
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403364
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Return NULL on resource failure (spdk_mem_get) instead of
abort()'ing in static bdev function.
Change-Id: I0ee2ce4b7e81cf80546119e3db27c987fa912749
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403578
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can be used to force specific UUIDs for testing.
Change-Id: I40c403fd00c142552d632dd5f0fbe1ea9a6c9962
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403221
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In addition to the lvolstore uuid, add a per-lvol uuid for bdev
identification.
The lvol uuid is stored as an xattr for each lvol blob; if an lvol blob
without a uuid xattr is encountered, the lvol bdev will not report a
uuid for now (it will be set to all zeroes, which will be treated as
no uuid available by the generic bdev layer).
Change-Id: If00221383a12d62234fc085d56e257dd48053103
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
A bdev that is claimed is not a leaf, even if it has no vbdevs exposed
currently.
Change-Id: I3b790068128890a569f83b15071ea916c54bff9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds the QoS parameters on the bdev channel.
Change-Id: I0cb9bf9e9cdbbe61c70c4a3df4eeb8be774793a0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393129
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Briefly tested with SPDK target via bdevio
through both vhost-user and QEMU's virtio-pci.
vhost-blk driver is not mentioned in any doc yet.
A virtio-blk bdev can be created as following:
`construct_virtio_user_blk_bdev /tmp/virtio.0 MyVirtioBlk0 --vq-count 16`
`construct_virtio_pci_blk_bdev 0000:01:00.0 MyVirtioBlk1`
or
```
[VirtioUser0]
Path /tmp/vhost.0
Type Blk
Queues 16
[VirtioPci]
Enable Yes
```
If `Type` field is not present, the VirtioUser
section will be parsed as a SCSI one, preserving
backward compatibility.
Change-Id: I3eae9f3b90570fbb0177df4951e5eed86fe07c66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This simplifies the code and eliminates the possibility of accidentally
inserting other items in between a key and its value.
Change-Id: Ic3bf7d0a85e9475171fe00cbcac6fe3ede731e69
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unfortunatly not all bdevs produce its configuration in responce to
get_bdevs RPC call (eg nvme is producing tons of additional
informations). To not breake any existing scripts rename
'dump_config_json' to 'dump_info_json' instead of reworking those
callbacks. Next patches will introduce real 'dump_config_json' handlers
and API
Change-Id: If9c1a4ab864791b24a5f7d022e970cd65990ffc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Implement a poor approximation of reset handling for the RBD bdev so it
can pass the bdevio tests.
This should be replaced with a solution similar to bdev_aio, which waits
for all outstanding I/O to return before completing the reset. However,
this should ideally be handled by the generic bdev layer rather than in
each individual module.
Change-Id: I1be2bf90875e23e05efdebb003e5412f3fc43793
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401273
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the RBD bdev only supported a single iovec entry, which is
not sufficient for the bdev API.
Change-Id: Ic18257bae0363b9c01e091547e5b41bae0a21e9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
With recent update to bdev.c for its io_device_register
handle for new bdevs, several modules can now just use
their respective structures defining each bdev rather
than picking a more complicated one.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8ea24c64a782e54d18b6241e36f56dbbbb5f1e7
Reviewed-on: https://review.gerrithub.io/400555
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Many bdev modules create their own bdev structure
with spdk_bdev as the first member. bdev.c currently
uses the spdk_bdev pointer as its io_device handle,
forcing bdev modules to pick something different.
Change this to use the spdk_bdev pointer + 1 bytes
as its io_device handle. The actual handle does not
really matter - it just needs to be unique. This will
simplify bdev module development.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b6da3be9c16c87bc7a393c3a2221c6bae26e0a5
Reviewed-on: https://review.gerrithub.io/400554
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The CFLAGS in these files add unneeded include directories.
Change-Id: I742a75b7ce5bff2f1dfd6f92d99ebc99a1936666
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/400862
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This avoids recursion in the case where the remove_cb
immediately closes its open descriptor, resulting in
a second call to spdk_bdev_unregister without unwinding
first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I093786f13bb2953b8f08888a668a045581a9f81c
Reviewed-on: https://review.gerrithub.io/400305
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ice343afdc84c2a11cd9026d128a35f7a62aa7125
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398933
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Tree-wide cleanup of all instances of printf()-style functions where a
format string contains a space before a newline character.
Change-Id: Ib5b5861e97bed9e9d62db03875547e3f771f4769
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397031
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This patch adds two internal functions for the channel
create and destroy.
Change-Id: I3c5ca7a0633e5a5b3f95a36ed03f2b4cb4792e4f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/395677
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the different cases to creat a bdev channel, added
a common cleanup function to destroy the resource.
The same function is also called at the bdev channel
destruction.
Change-Id: I81b60cab9df3a8975b0a9982482c9d27899d8a79
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/398351
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously there was no way to get and verify that ctxt
in bdev was actually an lvol.
This will be used in rpc calls for vbdev_lvol.
Change-Id: I01c50487b740f5bb858dc50e609f023c8b4101ad
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/398178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib3507a9e69b210cbd173c88d166025d4579e0149
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/397602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New optional argument added to get_lvol_stores RPC.
If lvol store name or uuid is provided, details
for this single lvol store is displayed.
It follows similar logic as in get_bdevs or get_nbd_disks.
Change-Id: I11e71d98f3cde869addf5cedeb4f33e5cebf53ea
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395126
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie6a651d0238d09729e28d5456a84ba090faeb465
Reviewed-on: https://review.gerrithub.io/391568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modified include/spdk/bdev.h and include/spdk_internal/bdev.h
add data members to capture statistics information. Modified
lib/bdev/bdev.c to calculate read/write latency.
Change-Id: Idcd55dd2e88c4b308e016f16ced53720256c79e3
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/390654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add api and unit test functions for
change number of blocks for provided block device.
Change-Id: I55d67c99375cb88bdaa79ce1a36d4298223beddc
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/390802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These two RPCs were missed in the initial COUNTOF conversion.
Change-Id: Ia40eb0cf3b5c859e2b63148e442fd7d52d1032a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396231
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_vbdev_unregister() is part of internal bdev API,
yet bdev module that uses spdk_vbdev_register() directly
will not be removed correctly when using delete_bdev RPC.
spdk_vbdev_unregister() is now consolidated with
spdk_bdev_unregister().
This comes up when deleting lvol bdev, as it does not use
spdk_bdev_part_* functions.
base_bdev->vbdevs entry was not removed for bdev that lvs
is created on.
Additionally patch expands test to create lvol bdev,
after removing it using delete_bdev RPC.
With ASAN enabled this would report accessing
already freed memory previously.
Change-Id: I9547e83862e2daa50355d56a1c9f453aaa6cfdb8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make it non vhost-user specific. The same
code will be later reused by upcoming
construct_virtio_pci_bdev RPC call.
Change-Id: I6964fedea2a1d52c9b06d5fd8cafe745e06df0ab
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394504
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The default name remains as sprintf("VirtioScsi%d", counter++).
Change-Id: I244c1389f8dfac16f61aaf1d610a7888dd55e56c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394446
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just the API introduction. See subsequent
patches for its RPC usage.
Change-Id: Iadb7c9bf6a56ab4330c9f2215c6006a2935d208d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When there are two bdevs built on the same io_device,
it is possible that one bdev entirely saturates
underlying queue, not letting the second bdev issue
a single I/O. The second bdev will silently fail any
subsequent I/O and append it to the nomem_io list.
However, since we resend I/O only from I/O completion
callback and there's no outstanding I/O for that bdev
(io_outstanding==0), the I/O will never be resent.
It'll be stuck in nomem_io forever.
This patch makes nomem_io list to be shared between
bdevs built on the same device. It is now possible
that I/O completion callback from one bdev will retry
sending I/O from other bdev.
The shared bdev data is based on thread-local
bdev_mgmt_channel, so doesn't need any external
synchronization.
Change-Id: Ia5ac3a1627ce3de4087e43907c329aa7d07ed7c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
In current bdev_virtio_scsi PCI enumerate callback
implementation we rely on a global variable - a global
list of virtio devices. We do not need any opaque
context data inside this callback just yet. It will
be required to add virtio devices in runtime. See the
next patch for details.
Change-Id: I116cbd3bd633f56922eedcc7c07b8c0310e51d49
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`rpc.py remove_virtio_scsi_bdev <name>`
The RPC will remove entire Virtio SCSI device together
with all underlying bdevs.
Change-Id: I87f349b0e7543955d54a34406cf73c4a91d1495f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394170
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consider the following scenario:
* user deletes a Virtio-SCSI bdev (spdk_bdev_unregister)
* user deletes entire Virtio-SCSI controller (virtio_scsi_dev_remove)
If there were any descriptors open with asynchronous
remove callback specified, the first bdev unregister
won't delete the bdev and won't notify the Virtio-SCSI
controller in any way. Subsequent Virtio-SCSI controller
deletion might result in unregistering the same bdev
again. This patch makes Virtio-SCSI controller open a
dummy descriptor on each of its bdevs, so that it's
notified of any started bdev_unregister
Change-Id: I9a8c841d08393ef1940c4cebc9dfcb58e9b0ac4a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394169
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This avoids having to dereference the spdk_bdev_io's
channel in the spdk_bdev_free_io() path.
Cleaning up after hotplug events should ensure that
all associated bdev_ios have been freed (not just
completed) before the bdev channels have been freed,
but this patch gives us some more wiggle room in this
area.
Results in a small (1-2%) performance degradation on
a bdevperf microbenchmark, but should result in no
noticeable difference on any real world workload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8b88300fc53e8c0b83309a738a4c3bd2aeaff52
Reviewed-on: https://review.gerrithub.io/394399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This is more efficient and buf_link users don't
need the extra flexibility that TAILQ provides.
link could also be changed to an STAILQ, but its usage
is not in the performance path so not touching that
as part of this commit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df2cc24a3784add8370db859003783e92cbfc21
Reviewed-on: https://review.gerrithub.io/393834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Most relevant fields get initialized after the structure
is returned to the caller, so this memset is just
wasting CPU cycles.
buf still needs to be set to NULL, so just set that
field explicitly.
bdevperf with null backend shows a 10% improvement
with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92ef0ea887f1307abdcd4b80bc08b45ccefe27d9
Reviewed-on: https://review.gerrithub.io/393714
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
bdev_ch->io_outstanding - NOMEM_THRESHOLD_COUNT
can be negative, so change the type, then
we can make the comparision correct.
Change-Id: I823ceb3dd053f71c1902ee66cf4caba719a7ae7d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393437
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also added vbdev_get_lvol_by_unique_id function.
Change-Id: I55a64df008c23c0fedb8a59ef67e2c356097e780
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/392658
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ic0cdcf088ebd5053f2e69ad2e607ee825d96fcb6
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added aliases list to bdev struct.
Added 2 API calls to add and remove aliases.
Added test for adding and removing aliases.
Change-Id: I1815aec8c02cfa398b2d1de41577197315665fdc
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390200
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The error vbdev was missing a remove_cb, so unregistering its base bdev
would cause issues later since the error vbdev would not get torn down.
Change-Id: I6d94f67ce0d4f20a7a63c902b11d965115481df7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make them usable for other Virtio drivers
(not just SCSI).
Change-Id: I7ae2c43f311fefd40e447c8b5accaf824d0e23de
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393121
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If faced no memory status, we should set it to nomem,
thus, we can make this I/O resubmit it again.
Change-Id: Icb9a7eeab3278021fa95a5e33c7ff55b3cc62558
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393122
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we used to manually set
vdev->max_queues and called virtio_dev_restart
to go through all virtio init states, negotiate
features and allocate virtqueues. This is,
however, insufficient for Virtio-Blk, where we
e.g. need to check against negotiated multiqueue
flag before deciding how many queues we can use
(reading num_queues field from device config is
forbidden unless VIRTIO_BLK_F_MQ is negotiated).
This patch refactors queue-num related code
and also removes various restrictions. If device
supports less queues than requested, a warning
will be printed during initialization, but
the device will now continue to init normally.
The queue-num negotiation for virtio-user should
be eventually moved to upper layers, but that is
not necessary for now.
Change-Id: I418b56fa62c17b547243422ea077f0d76555bd13
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the host fails to send some events,
the next event it succeeds to send
might have an EVENTS_MISSED flag set.
Once virtio receives such event, it will
schedule a full bus rescan to manually
detect any changes.
Change-Id: Ifa66536f8e2980ad31ee68769f042f08100da54e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392780
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Don't allow starting full device rescan
if such scan is already in progress.
This patch also makes it possible to
start a full scan while only particular
targets are being rescanned.
Change-Id: I8677f640a4e5d9d8c486dfe1e9a58331e941a461
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392373
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implemented eventq rescan message.
When the host hot-attaches a target
to the controller, it will now
automatically appear as a virtio bdev.
Change-Id: Ie81352b70808a0e078009f618cc1fcfed407d1ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392374
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A public API to remove a virtio
controller is about to be published
soon. Hence, we need to cover all
possible corner-cases where calling
it could cause a segfault.
Change-Id: I804cc0bee4a60ab8fc159bb98b7712cc258117f3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392271
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The upcoming rescan implementation will
do scan I/O on existing I/O virtqueues.
To handle scan cleanly, we need to queue
scan I/O if virtqueues are full.
The heuristics for resending I/O should
be sufficient for all real case scenarios.
A scan I/O consists of either 2 or 3 iovs.
A raw I/O consists of at least 2
descriptors. Since most I/O requests
contain some additional payload, in 99%
of cases the scan I/O will be successfully
resent after polling a single I/O response.
To handle the remaining 1%, we try to
resend a scan I/O up to SCAN_REQUEST_RETRIES
(currently = 5) times.
Change-Id: I8c84ed1d109d9f403c9d7b8efabb904eb26183db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI doesn't specify any payload associated
with TEST_UNIT_READY and START_STOP_UNIT
commands. Sending a payload didn't cause
any troubles so far, but still it's not SCSI
compliant and hence has been removed.
It is now assumed that iov_len of 0 means
that no payload should be sent.
Change-Id: Ibdfa7cd77af6049132278911d872cd52c10be6c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
scan_finish function will now unconditionally
finish the scan, while scan_next will continue
scanning on the next target.
Now that target scan be aborted from external
sources (device removal during re-scan). There
is simply a need for such scan_finish function.
Change-Id: I49e0dd6ea7abdddc24c23af362313d657fe1dc66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used to defer registering bdevs when
a target scan was in progress, as bdev examine
(gpt) would do an I/O that could be polled by
the scan poller and parsed as a scan I/O response.
This limitation has been removed a long time
ago. Scan I/O can go alongside default I/O and
bdevs can now be registered at runtime.
Change-Id: I949c57acbfe23a7246de90e90ce58ea007be947e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391865
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Eventq is a special virtqueue. The driver
(e.g. SPDK virtio) enqueues some fixed
amount of write-only requests. The host
device completes them only when it has
something to tell us - like a device
hotremove. After we receive the response,
containing full event details, we schedule
proper action and re-enqueue the event to
be used later by the host as another event.
Change-Id: I0516b161d8d4a49490b909fa2a454c9c9fa517f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390115
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Exported lib/bdev/rte_virtio as a separate
library not dependent on bdev.
Virtio is now accessible via spdk_internal/virtio.h.
The header is marked `internal`, as it's
not meant to be used by end users. It's
not handy to handle all backend-specific
(e.g. Virtio-SCSI) logic in a user code.
For now the Virtio interface is publicly
exposed only via bdev_virtio module. We
might want to consider adding a separate,
public Virtio-SCSI library in the future.
Note: this patch doesn't do any changes
to the virtio code. Everything is
moved 1:1.
Change-Id: I805e5d12d265d82b0bc5784c89fbadb81abdb278
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We can now proudly say that rte_virtio
doesn't contain SCSI references anymore.
Change-Id: Id814de255d8715af03c68a237923432f1e4fe2e1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392628
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This mimics the per-lcore cache that the DPDK rte_mempool
implements. But DPDK rte_mempool relies on the DPDK
lcore_ids which are not set for non-DPDK threads (such as
the fio bdev plugin).
So implement our own per-thread bdev_io cache instead.
This is quite simple since we already have a per-thread
bdev channel called spdk_bdev_mgmt_channel.
Previously, we passed 64 to spdk_mempool for the
per-core cache size. This patch effectively changes it
to 256 and moves it from the spdk_mempool (which we now
specify with a per-core cache size of 0) to this internal
bdev cache. We allocate 64K of these bdev_io, so putting
a few more in each thread's cache will not hurt anything.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e715f8c69b99130c7b80347b47a881595d184ae
Reviewed-on: https://review.gerrithub.io/392531
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
During hot remove of lvol store some lvols can already be in a process
of removal. We should not start another removal process for lvol that
is already being removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ifc91e4cee11ee63af04eac3729d014d7c04ff98b
Reviewed-on: https://review.gerrithub.io/390217
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Instead of requiring each bdev module to track its own bdevs and clean
them up during its fini callback, we can walk the list of registered bdevs
during spdk_bdev_finish() and call spdk_bdev_unregister() on each one of
them before cleaning up the bdev modules.
Change-Id: I01816707c9100f66f542bfd73b90bcb0e0fb0c0c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Call this function from spdk_bdev_mgmt_channel_destroy().
Currently there are no real resources to free, but that
will change in an upcoming patch which adds per-thread
bdev_io caches.
While here, also add a for_each_channel iterator to
call this function on each existing channel during bdev
finish code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9348e37053505c9fba7a6421e55ffc416668d24f
Reviewed-on: https://review.gerrithub.io/392530
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some upcoming changes which will
add a per-thread bdev_io cache.
While here, remove spdk_bdev_get_io() from the
internal bdev API. This function is not meant
to be called outside of bdev.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f764a88a079fac936931c46d615999454013732
Reviewed-on: https://review.gerrithub.io/392529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To better match bdev modules like nvme, complete requests
for the bdev/null driver asynchronously. This will be
done by allocating IO channels that register a poller
and keep a TAILQ of bdev IO to be completed next time
the poller runs.
This is actually more efficient as well, since completing
I/O in submit_request context defers the completion using
an event. A benchmark of bdevperf with split running on
top of null module shows this patch increases throughput
20%.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8c664234660c249fd8ec8d9244eed33502d4103e
Reviewed-on: https://review.gerrithub.io/392528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that we have SCSI-specific virtio
device struct, we can keep our virtqueue
pollers in there.
Change-Id: If4b643f8c46e42d5d403532ad015c721c0429282
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390114
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The virtio_req struct has been removed.
The new lower-level API has been used
instead. This puts more responsibility on
the upper abstraction layers, but gives
much more descriptor layout flexibility.
It is required for e.g. upcoming
Virtio-SCSI eventq implementation
Change-Id: I9a310c0ba4451bf3a076bef4e90bb75c0046c70a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391028
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The struct is about to be removed.
This is a preliminary patch towards
the removal.
Change-Id: I5a479678790b8758634bdb0bb2e6facfde514aa1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391945
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The old API is simply not sufficient.
We assumed that each request contains
a single request and a single response
descriptor. However that's not the case
for e.g. virtio scsi eventq, where each
event contains only a response.
This patch only introduces the new API,
keeping the old one intact. The old API
will be removed in subsequent patches.
Change-Id: I89e53d602165aa0c7ceb25d98237f87550f4eae7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390854
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I088f62e6035aa1885ad0973a033ecee2f325ed30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391684
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I4c12388433f8c57291cea9f30566438a9d78e3d1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391683
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Using the ** paradigm is a bit problematic for asynchronous
routines that could fail. Currently we were inconsistent in
that some error paths would zero the pointer while others
did not. So make this just a plain pointer, which simplifies
the API and its implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67147931c6e8350896a4505022a6a314655de3d3
Reviewed-on: https://review.gerrithub.io/391482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I85d33f5223ebb30fcf0135596537142e48f2879f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While iterating, allow the user to perform asynchronous
operations. To continue iteration, the user is expected
to call spdk_for_each_channel_continue.
Change-Id: Ifd7d03d5fbf17cf13843704274b036d49ca0484a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This function was a nop and is not needed.
lvol was calling this function when an lvol bdev
gets a FLUSH I/O, but that is not needed either. So
lvol will now report it does not support flush.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92df83243f7ebce81c69040a8874891dc2ffc961
Reviewed-on: https://review.gerrithub.io/391023
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Most importantly, the controlq and io_device
are now created at the time of creating the
device, not after the scan has finished. This
allows us to possibly scan the same device
multiple times.
Change-Id: Ic1de27f917204559be5c761315a3ebfe159b1c22
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390112
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rather than acquiring an exclusive virtqueue
for the target scan, (re)use an existing one
from io_channel on the scanning thread.
The goal is to be able to rescan the virtio
device in runtime (hot-attach/detach).
Now that scan can be done on existing queues,
it is no longer guaranteed that rings have
enough space to enqueue all requests. This
will be fixed in subsequent patches.
Change-Id: I0a39460c0ddb52592ae6828e5a7f51056ada2696
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390111
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The virtio device can now be
removed with a single call.
Change-Id: I221d2c0578eeddb3de9c2a31eefc0f64fda38939
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390110
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Starting with a8c375ad, virtio-scsi devices are enumerated from 1. This
is a change in previous behaviour where devices were enumerated from 0.
This commit restore the behaviour of the last stable SPDK release.
Change-Id: Ia8e7dc13e0831e603af831eeab67796025fce417
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-on: https://review.gerrithub.io/391085
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23f71ff38b805723d74aca639489e0079ecdb993
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390341
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch do not actually reset the aio controller, but make sure all
the IOs inflight return back to client before we return success status of
lun reset command.
Change-Id: I473b5f8d795cdc2a32b69cfffcce5a2925a252f6
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/386837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
argument 'name' was added as optional but it was requiered
to create new virtio device, causing incorrect parsing
of arguments. Also, there were missing names in output when
creating multitarget device
Change-Id: I3a3b68fd91c3aecbe94f91d95299d042b1dec7b8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/390805
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie7a6513d45652d4a6420ac52b5ded39581d688c6
Reviewed-on: https://review.gerrithub.io/388944
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The function just needs to zero out metadata so that the
blobstore is effectively destroyed. If the user wants
to unmap the rest of the disk after the blobstore is
destroyed, they are free to do so. On future initializations
of blobstores the code will do the unmapping, so performance
is not impacted.
While here, implement the zeroing using the new
write_zeroes functionality instead of allocating a buffer
full of zeroes.
Change-Id: I7f18be0fd5e13a48b171ab3f4d5f5e12876023bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This distinction was required to
be able to check if device has been
scanned already. However, with the
upcoming eventq support it will
be possible to re-scan the device
at any time. We could move the
vdev back and forth between the
lists, bu now that SCSI devices have
their own virtio_scsi_dev struct,
we can remove this distinction and
check the scan status from within
the struct itself.
Change-Id: If57e7ce4b9ce900aa36a5aeba9e4b4a432d3c757
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390109
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Virtio-SCSI devices now have their
own structs. This patch introduces
only the struct, no functionality
has changed.
Change-Id: I04907497ed173747875e1b67acad38043bf4de09
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390108
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cleaned up and expanded documentation
of virtio bdev module.
Change-Id: I4b989ed8b4d5e0bc66c0f0706e61219daf4e2869
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390107
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added virtio_pci_dev_init, an equivalent to
virtio_user_dev_init. It takes an opaque pci
context pointer that is provided via virtio
PCI enumerate API.
virtio_pci will do only PCI-related
initialization. The virtio_dev creation
and SCSI-specific logic now belong to upper
layers
Change-Id: I7ad450591f893c4ab953c09cfb6441b186736751
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388302
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3cbb52cd9a4201704423b49eae74935b8a33b0fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This allows the to use a virtio_dev allocated as
a part of bigger struct - possibly a SCSI/BLK
specific wrapper.
As a part of this refactor, multiple vdev-related
functions have been renamed to keep the API clean.
Change-Id: If84bf03e4a1642869c2f1ba93939fb32c8fb5d57
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested with bdevio, hardcoded TUR response to test the start/stop
unit code
Change-Id: I5038e6bcce9fcd423f1b93c8bb8b466ee3817654
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/387183
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4966d19b06d37bbcf4527cbd9c206e9a553e8fd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390083
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the existing bdev_null_destruct() function instead of open-coding
the bdev cleanup; the bdev_null_finish() path neglected to free the bdev
name.
Change-Id: Ie74be39b0475674f70c3999bbe2f21caab2e2e20
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389867
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When device was reinitialized, the old
virtqueue memory used to leak. While
here, also added a doc for virtio_dev_init.
Change-Id: I9bb8dbfa5d68deeb73e71567a7e51b82f869537a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388297
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vbdev_* functions that were declared in lvol.h are all internal to
the lvol vbdev implementation; they don't need to be in the public
header.
vbdev_get_lvs_bdev_by_lvs() is moved to the top of the file so it
doesn't need a forward declaration (no code change).
Change-Id: I98282d3cb0008da5c5b5059eee335219dc929f1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modify the vbdev_get_lvol_store_by_uuid() API function to take the UUID
as a string instead of a uuid_t, since this simplifies the calling code.
This also allows us to remove #include <uuid/uuid.h> from the public
API, giving us the freedom to change the underlying UUID implementation
later if necessary without breaking API.
Change-Id: Ib360281f384f95722c5ab64e75dcf3603f826e4c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the call sites already have a lvs pointer; there's no need to
look up the lvs by UUID again.
Change-Id: Icef54d84e7c89f682ea47f10b282839ab4237ce0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The array of message strings is now only used in vhost_user.c, so it
doesn't need to be exported.
Change-Id: I40163b95a52a1762eb3639db5553814bf1299959
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev module get_ctx_size callback is only necessary if it returns a
non-zero size.
Change-Id: I00ca366b8a1949bdb091c5e8aefb19cb606481d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than iterating over the g_nvme_bdevs list to determine if a bdev
is an NVMe bdev, we can just compare the module pointer.
Also, the function can take a spdk_bdev pointer directly rather than
casting from a void pointer.
Change-Id: Iccf3c9b3263e9b2d67d07d037dc00d1cbc0f22a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389899
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch will make sure the nvme bdev work in correct way when we delete
bdev by using rpc method and then exit the app.
Change-Id: I19172440d46d96c7396282e1bef07d98ab601390
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
replace the bdev_nvme_destruct() with spdk_bdev_unregister(),
clean all the resource in the bdev layer.
Change-Id: Ic4b85dee6225f42babe868796a8c24dec5c22af6
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389855
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The 'm' variable was only used in sizeof expressions; m was a struct
vhost_user_msg, and we already have one of those called 'msg' in the
function where it was needed.
A previous commit removed a RTE_USED() marking on m, which introduced a
warning on clang, since it can now see that m is unused.
Fixes: 73bfcede86 ("rte_virtio: remove rte_memzone from vq")
Change-Id: I63eb0d82c7c750b4181b6312bbda82ef3213c205
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389648
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Also removed vdev->started field.
Used vdev->status field to determine
if a device has been `started`.
This is simply a cleanup.
Change-Id: Ieb06b03b3bd60bd5906b41c987c418604906c913
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388296
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that vtpci_internal has been removed,
the vdev->id and g_ctrlr_counter are
obsolete and can be removed as well.
Change-Id: Ia1e83cdc81552173f4b57283f83c5791e2b90daa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388301
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Removed another direct DPDK dependency.
Change-Id: I12d9a49fb16fbefad42c09f46c280f6f7be094d1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388300
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Use standard spdk_dma_malloc instead.
This removes another direct DPDK
dependency. Yet, for multi-process
support we will more likely use a
memzone for the entire virtio device,
not it's virtqueues.
Change-Id: I57119ad830b573b718605b46cc3099b105651ee9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385629
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Replaced them with spdk alternatives.
While here, also clarified the documentation
for virtio_*mb.
Change-Id: Ia604e9abd8eadc18fa3ea1a782e29e7da6b3c162
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385627
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Moved some vq-related functions
to virtio.c. It's the only place
they're used in.
This patch also removes the
virtqueue_full() function. It's
not used anywhere.
Note: all the functions content
has been moved 1:1.
Change-Id: Ib854fc0836378e6955c0a7358ecabcf2c3107d06
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385628
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change the return type of spdk_bdev_register related
functions and try to handle the duplicated name
issue.
Change-Id: I23af11583cf2050579d1624508306a35394bffde
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id0f7751d8889584fff1a947160ee89e2f158af1c
Reviewed-on: https://review.gerrithub.io/388943
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With configuration where there are nested lvol stores we
encounter situation when hotremove and fini functions try
to unload the same lvol store second time (previous unloading
have not finished yet).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Icb5d430d17024fbda0e6113b380d8f346a3e9a84
Reviewed-on: https://review.gerrithub.io/388790
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It doesn't need to be accessed outside of bdev.c.
Change-Id: Ib1a1abe88b0993e391e0a39c5483781b2c0ad523
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388508
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The io_device_unregister callback might be
deferred and called on a different core, but
the virtio device has to be released from
the same thread that created it. Hence, once
the unregister callback is called, it has
to send yet another msg to the vdev-owning
thread. Since all virtio devices are currently
created on the same thread, no mutexes are
needed. They will need to be introduced once
we publish the API to connect to virtio
controllers.
This patch also defers bdev_virtio module-
-finish until all virtio_devs are destroyed.
Change-Id: Iaafceefa1e862b839b5db8c6c4975bf51441a083
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388835
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to send a message
to a virtqueue via spdk_thread_send_msg.
Change-Id: I8502f27e74de107bc5e5ccf2939448896579acc2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We previously used a separate io_device
for each bdev created from a virtio_dev.
The new approach makes us reuse the same
io_channel for different bdevs on the same
core. It also provides a built-in safety
check for freeing virtio_dev only when
all io_channels on this device have been
closed.
Change-Id: Iaae66964f90aa3cef95ed2e261c6f3dfb2f26caa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388505
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vdev->ctx conversion is now
straighforward and doesn't need
any macro.
Change-Id: I88b0cf3fa5e95b93e5f69a0a3ae9508f9fac3683
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385625
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a single header file that
provides access to all virtio initiator
capabilities. This is a preparation
to exporting rte_virtio as a separate
spdk lib. Also renamed virtio_dev.c.
Change-Id: If45a0cadc61943b6ffd87cf70a59321a83b238a6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385624
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's contents have been moved to
virtio_user/vhost.h and virtio_dev.h.
The virtio_user_dev struct can't be hidden
in virtio_user.c (similarly to the virtio_hw),
due to another abstraction layer in virtio_user
- vhost-user and vhost-kernel. Even though only
vhost-user is implemented now, let's not close
the possibility to implement vhost-kernel in
the future. The vhost-user/vhost-kernel code
should probably be placed in separate files,
with the virtio_user_dev struct in common
vhost.h header.
Change-Id: I36ee96eff30b398dd129953a874513e727619f98
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385622
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved it's contents to virtio_user.c.
Having this logic separated across
multiple files doesn't make much sense.
Change-Id: Ib2daaa56e1b3d755d9476abca247c7cbcfa7096b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Renamed all vtpci functions.
While here, also added some documentation.
Change-Id: Id24aaab8c5b556b969c60ee1c95b9d46936ea13d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385426
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
virtio_hw struct definition is now hidden
in virtio_pci.c. The API to enumerate all
PCI devices is available through virtio_dev.h.
Change-Id: Ib9c968732d9f78204e9664c426ad99542cfe8c93
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385425
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vtpci layer is about to be removed.
This is only 1:1 code move, all functions
will be renamed/refactored in future patches.
Change-Id: I63c1b30fdaf6eff2e5d8bf60e62c87c2cb9f2b15
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385424
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that legacy PCI support has
been dropped, we can safely assume
there's only one backend type
per device. So the vtpci_internal
- containing process-local data -
can be removed.
Change-Id: I15d87a280b74318c7a44ee60ce3408756d1f5a69
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385423
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch initiates the removal
of the vtpci layer from rte_virtio.
The general idea is to provide separate
virtio_dev_construct and virtio_dev_init
functions. construct would just allocate
and setup the struct data. init would
be the one to start the device via
MMIO/vhost-user. virtio_dev_construct
takes 2 params - backend ops and backend
context. The context is kept as void*
and can be cast to proper structs inside
backend ops callbacks.
Change-Id: I1d6d92e1cf09b9d0c9fa4fd2cb70203e3fc7e65b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We currently pass virtio_user_dev as
an argument to various function in belief
they will access the virtio_dev via
virtio_user_dev->vdev field. However,
this field is about to be removed soon.
This patch is a mid-step towards a bigger
change. See the next patch for details.
Change-Id: Ie684aa1614d9777d79d350bbfda79effe2a2d5f6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385422
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It's been only used in 1 place.
Change-Id: I0b7c9cdb809a6946eda5ee361362dec86e57b4ef
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385623
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required for future changes.
The general idea is to provide separate
virtio_dev_construct and virtio_dev_init
functions. construct would just allocate
and setup the struct data, while init
would be the one to start the device via
MMIO/vhost-user. If we want to destruct
a non-initialized device, there's no
need to do a reset.
Change-Id: Ib8ce56169e86e43fba8fcd1bf6c2a5b12ed99966
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Even though config change intrrupt
handlers are still required, we need
them only for real PCI devices.
They should be handled internally
in vhost_pci.
However, current QEMU implementation
doesn't ever change SCSI PCI config,
so no interrupt handler is required
for now.
We might want to add it together with
Virtio-Blk, as PCI config will change
there with each resize.
Change-Id: Iece024cd31c788857ce900385e289758ca3f5948
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385304
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It's been only used in 1 place.
Change-Id: I3e933d3fb0816ea30f983fb3de69ce49238c3b72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385303
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When there are no lvols present on lvol store
spdk_bdev_module_examine_done function is not called
when tasting is done.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia6c559f392148e3b4444dbc547df462bbe02356d
Reviewed-on: https://review.gerrithub.io/388402
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic11a56c5616098ff42f31f78aa96289af5965118
Reviewed-on: https://review.gerrithub.io/387611
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_nvme_io_passthru_md() is verified on QEMU NVMe
and will be verified on Cosmos mini OpenSSD.
Change-Id: Ib759b6b6095deaa4ae7cf746f3a241f678295605
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/387114
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the return type of spdk_channel_msg from
void to int. If this msg executed in a failure,
we do not need continue sending the message to other
threads, we can just tell the original thread, and
let the orgiginal thread call the spdk_channel_for_each_cpl
call back.
Thus we can track the qpair creation/destroy case for bdev
reset in nvme bdev module;
Change-Id: Ide9dffd1f84a29fcf61d8339a9ece2a0245d968d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 17.11 removed all rte_config.h includes
from rte_*.h headers, meaning we should either
use gcc param -include rte_config.h (just
like DPDK does), or include this file before
each other rte_*.h include. Since we're using
the latter approach in many places already,
I decided to follow it.
While here, also removed rte_vdev.h dependency
from rte_virtio/virtio_user.c. It's not used
anyway.
Change-Id: I865ee9f828211c03a60fd0446f7a418d5dddd140
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Legacy PCI code is hard to maintain
and compiles with DPDK 17.05 only.
If we ever need this functionality
in SPDK, we should first add proper
env/pci layer for direct UIO/VFIO
communication, and then revisit this
topic.
Change-Id: I25622c16f467633e01003c9edbb7e6f297c68a86
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385302
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The process of spdk_bdev_finish will always result in an
early call to the user's completion notification - prior
to the actual shutdown events happening.
Change-Id: Ib53393deb794b616d2b7ec94cb41502305bd99b7
Reviewed-on: https://review.gerrithub.io/386707
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Show total accessible clusters when listing lvol stores
instead of total blocks. This is more readable for user.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I22a14f626816769cf2f494ae30cfd8ee63897771
Reviewed-on: https://review.gerrithub.io/385634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During tasting, if bdev is already claimed, we send errors on screen.
This is expected behavior so we should send only debug logs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic5766cfa3aed88099415991998381de69ee8b8b6
Reviewed-on: https://review.gerrithub.io/384229
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_pci_device_claim() can be used to ensure only one process
at a time uses any given PCI device. Previously this was only
used in the bdev_nvme driver - other apps like nvme/perf do
not use spdk_pci_device_claim() and could effectively rip out
the device from a running bdev-based app like the NVMe-oF target.
So instead of modifying all of the nvme apps, put this logic into
the core nvme driver instead so that all applications get the
benefit transparently. Save the fd when the controller is constructed
and then close it when the controller is destructed to handle the
detach (including hotplug) cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5dc48a2e41dc06707800f15a9e1f9141477628c6
Reviewed-on: https://review.gerrithub.io/385524
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users of this interface to then close the fd
when they want to release the claim.
This prepares for calling spdk_pci_device_claim() in the
nvme driver to cover not just the bdev_nvme driver but all
of our nvme example and test applications as well. We'll
want the fd returned so that we can properly close it during
detach (including hotplug) use cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b149cc4e778ba31c0e7045b858c8a1561b6b7af
Reviewed-on: https://review.gerrithub.io/385523
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modified the above files to add rpc support to update NVMe firmware. Currently,
the path parameter must be local to the RPC Server.
Change-Id: I2b14e37792a2f0a5759e8b13e21137e7f346e58e
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/369083
Reviewed-by: Paul von Stamwitz <pvonstamwitz@us.fujitsu.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As part of the SCSI target scan, request the Block Thin Provisioning VPD
page to determine if the target device supports Unmap, and report it via
the io_type_supported bdev callback.
Change-Id: Id2fdaf3a2cae72e6356a862d40ff772f9d12d144
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/384131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This prepares for adding more steps to the scanning phase. Each step
will put its results into the scan info struct, and the final
alloc_virtio_disk() call will copy the info to the allocated disk at the
end of each target scan.
Change-Id: I836ada42e25c817bb1998328cb592acac25be08d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/384130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic6770371d9d62cbdd40ae0612eb4f7dceccd507f
Reviewed-on: https://review.gerrithub.io/383771
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ifbb02f99cd2e5752b2bc9091733b87ddadec11a4
Reviewed-on: https://review.gerrithub.io/383895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some devices expect alloc_len
to be the same as payload len.
Kernel vhost-scsi reports:
Expected Transfer Length: 256 does
not match SCSI CDB Length: 255 for
SAM Opcode: 0x12.
Change-Id: I499290c207b77be6757441da002f9fcc9eebcecd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383779
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Scan requests will be re-sent
if non-critical failure has
happened.
This is actually required, as
some Virtio SCSI devices require
a dummy request to clear it's
POWER ON OCCURED unit attention
status after Virtio device init.
The very first request might fail
with asc = 0x29 (POWER ON, RESET,
OR BUS RESET OCCURED), but
subsequent requests will be
processed correctly.
Change-Id: I809bfe7952062995078f33dccb92192d722e6574
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1df83cbd6414a1bb8f54328c735950b9476e323b
Reviewed-on: https://review.gerrithub.io/384105
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First this change moves spdk_subsystem_fini() to trigger on
spdk_app_stop(). This ensures that spdk_subsystem_fini() is called
before reactors are stopped in spdk_reactors_stop().
Finish paths for subsystems, bdevs and copy engine is now
asynchronous.
Each of those three mentioned have to make sure they are
asynchronous as well.
Only bdev that currently has requirement for asynchronous finish
are logical volume.
Thus the change in vbdev_lvol.c making it move to next bdev module
only after all lvol stores were unloaded.
Fio_plugin finish of bdev and copy_engine was removed for now.
Next patch in series adds it back with async support.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80ee2d084f3d82c50bf1329e08996604ae61b1b3
Reviewed-on: https://review.gerrithub.io/381536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The *TODO* section was outdated. Most of
this README's contents have been already
moved to doc/virtio.md and doc/bdev.md.
Change-Id: I2f2108afdc543276c9f08ae053ccebdbd6b1a229
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/384054
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Inserting into g_spdk_lvol_pairs list is done in vbdev_lvs_create_cb,
at that point it is known that it can be used. Meanwhile removing
was done at start of _vbdev_lvs_remove, to prevent possibility to
access it when waiting for destruct callback to complete.
This made checking if the g_spdk_lvol_pairs list is empty unreliable
to detect if all lvs were destroyed - they could still be being
processed and callback not yet called.
This patch removes lvs from global list only after the callback of
_vbdev_lvs_remove is called.
It will be used in future patch during asynchronous
finish of vbdev module to determine when all lvs were removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I638fe63a80b3cf00e9773f5a8c7be315d2c05555
Reviewed-on: https://review.gerrithub.io/382986
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To avoid code duplication those two functions were merged.
New _vbdev_lvs_remove function deals with differences by
additional argument "destroy".
No functional difference should be observed after this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I09067646ec9b9656f361077c54906a618e4e0c48
Reviewed-on: https://review.gerrithub.io/383908
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds new API to remove logical volume store
from device it is on. It is only used from RPC, when
user explicitly requests. It allows to use the device to
use as any other bdev.
vbdev_lvs_unload() is now only called from hotremove and
during application shutdown. Which makes it possible to
load it again during application start up.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If6452ecc3fff99237d1704ff7cd8de4d7133221d
Reviewed-on: https://review.gerrithub.io/382021
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently deleting bdev does not support asynchronous delete
operations. Because of that results are returned before device
is actually deleted and some operation can be peformed on that
device after removal of this device started.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I305c302d8abd5d7c2c0f947fca70c58396872132
Reviewed-on: https://review.gerrithub.io/383732
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It used to be NULL.
Fixes: a85a4452
("bdev_virtio/rpc: add construct_virtio_user_scsi_bdev")
Change-Id: I490b41571e5667cf95b59b2e316006d1ef7381e8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the recv() can't write beyond the end of the msg buffer.
Change-Id: Ibc4bb51ac3a1c2a027a458d59356b7a5496eca7e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383646
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Use the correct size types (rather than int) for values passed to and
returned from recv().
Change-Id: I2d38eed63e2d9c9f056d1053e156088fd361c88b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383645
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Add a name to each lvol which is persisted as a blob
xattr. lvol names must be unique within its
lvolstore.
While here, fix a few lvol_ut issues that were caught
as part of testing the lvol unique names. Also fix
a couple of tests that registered the wrong string
name with CUnit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d24d241e8f52158d14886f928d41823bbc93fa9
Reviewed-on: https://review.gerrithub.io/383567
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are some upcoming changes which will deprecate
the old lvsuuid_blobid name in favor of an
lvs_name/lvol_name name where these names are
user-specified.
In preparation for this change, rename the previous
lvol->name to lvol->old_name. This will allow us
to add a new lvol->name but keep the original
old_name during the transition.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10deb219097fa8726c146ab2427ee7373933b97d
Reviewed-on: https://review.gerrithub.io/383534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each lvolstore now has a unique name which is persisted to
metadata. Eventually this will provide a friendlier
way to reference logical volumes, in the form
lvolstore_name/lvol_name.
This patch only covers the unique lvolstore name. An
lvolstore may not be created nor loaded if its name
conflicts with an already loaded blobstore.
Currently there is no way to rename an lvolstore to
resolve a conflict. This will be coming in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I842f13b79776e5b8f81e56de10778c35328e8cd3
Reviewed-on: https://review.gerrithub.io/383533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up the two existing instances of trailing whitespace in text files,
and add a check to enforce that no new trailing whitespace is added.
Change-Id: I2197bed69bb356142aa6d2e4e8261c7434dd358b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383291
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace POSIX and standard C #includes with the central SPDK stdinc.h
and remove the rte_virtio exclusion from header checking in
scripts/check_format.sh
Change-Id: Ie53d11de7cd9a51c59957e3c500bd8b9b4c4bc5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383003
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the exclusion of the rte_virtio code from scripts/check_format.sh
since we will be maintaining this code going forward (unlike rte_vhost,
which we intend to keep up to date with upstream DPDK).
Change-Id: I30c186e566ca777dff552a36af53443d197a8824
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an I/O fails during the write zeroes fallback to write on a split
I/O, the previous code would call spdk_bdev_io_complete() again on the
same I/O, causing infinite recursion.
Fix this by restoring the original user callback before completing the
I/O, as well as using _spdk_bdev_io_complete() rather than
spdk_bdev_io_complete() to avoid double-counting the statistics.
This also preserves the original bdev_io->status code set by the module,
rather than always setting it to SPDK_BDEV_IO_STATUS_FAILED.
Change-Id: Ib71fa6e54eed3d5823652971f7c439e0ff236fc1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383506
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This patch introduces lvol store and lvols parameters saving
on persistent memories and loading it from saved data on app start.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia63f0cf3d6365d59f31c5f0a1724636bfe73b5b8
Reviewed-on: https://review.gerrithub.io/375764
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
pci_dump_json_config() is used for both legacy and modern PCI virtio
devices, so move it out of the #ifdef PCI_LEGACY_SUPPORT so it is
available when building against older DPDK versions.
Change-Id: I986f9e6a81abda64d77f954b15807d06e35d1748
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383487
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
17.05-rc4 is the version e.g.
rte_pci_ioport_read function was
introduced in. The bdev_virtio
module previously did not compile
with older DPDK versions.
Change-Id: Ib96d5d7934166acc552515b02bfba25b71929438
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
if write_zeroes is not supported by the block device, we can get the
same behavior by simply writing a buffer full of zeroes to the blocks
we want to erase. I also incorporate splitting into the bdev layer to
accomodate large i/o.
Change-Id: I8fa1bfaaf22d7bfc6e3afb6e89d22fa9f7767e55
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/373829
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a86f28056e67b3c237441fb1048ca6ccd081ae7
Reviewed-on: https://review.gerrithub.io/383252
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Close and destroy lvol functions should support callback
functions so that they can be processed sequentially
and also give user result.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9e87fb281916c65c17b2b7e54e91228844962048
Reviewed-on: https://review.gerrithub.io/383230
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK can now be compiled without
the virtio driver.
Change-Id: I92999c871d28875d519749a73a7f2230c3881fbe
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382828
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some future patches will require specifying an lvol_store
name when calling spdk_lvs_init(). This means that passing
NULL for spdk_lvs_opts will no longer be an option. So
add an spdk_lvs_opts_init() (similar to spdk_bs_opts_init)
which will initialize a default value for the cluster size.
While here, prepend an underscore to spdk_setup_lvs_opts, since
this function is not part of the public SPDK API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I155bcfd0c396017304bb3d58b7511ada71dade17
Reviewed-on: https://review.gerrithub.io/383030
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We interpeted max request queue
count as number of all queues.
It did not take into account
eventq and controlq.
This patch also fixes overall
max_queues negotiation for
modern PCI devices.
Fixes 8b0a4a3 ("bdev_virtio: implement multiqueue")
Change-Id: I834cb973772ca5946ac26d18bd3eeb2783f48ea9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was wrongly assumed that
each READ will contain at least
one iovec. This could potentially
corrupt the desc array.
Change-Id: I48ca7efbe4bea897e0ad16184452bddcf3daf49b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383009
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only the initial xmit_pkt is checked
against an error, the subsequent
xmits are just asserted. As scan
messages are sent 1-by-1 if the first
request (containing 3 iovectors) has
been enqueued successfully so should
the next ones.
Change-Id: Ie102256a42ef1c67132d606af90ab96771adba10
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382784
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case of not enough free descriptors
the bdev_virtio will fail the I/O with
NOMEM status.
Change-Id: I1cb0cd5453ff70468898bc8e414b53b9c64dbe50
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382783
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously all bdevs were using
hardcoded name Virtio0.
Change-Id: Ib990027a0edd4e200aa4b6f4689ccb9e0824a9c3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382926
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This doesn't change any behavior
as queue_idx was always either
0 or -1, but makes it clear that
this function always returns
-1 on error. This is required
by current io_channel implementation.
Change-Id: I2b613ab9ff1e48d5b4aee0cd499bbc0a04cb765c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382927
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Always start bdev pollers on the calling core.
This removes the lcore concept from the bdev poller abstraction and
simplifies the job of spdk_bdev_initialize() callers providing their own
poller and event implementations.
All callers except the NVMe bdev hotplug poller already used the current
core as the parameter. The NVMe HotplugPollCore option was undocumented
and unused in any of the tests or example configuration files, so it
should be safe to remove.
Change-Id: I93b466e1e58901b8785c40cbe296fa46c157850f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A single thread that initialized
bdev_virtio subsystem will be used
to poll control queues for all
virtio devices.
Every io_channel will put it's e.g.
RESET requests to the controlq MP-SC
spdk_ring. The controlq poller will
dequeue these requests and put them
into the virtio queue. The same
poller will then poll for completions
and send them to proper threads
that submitted given requests.
Change-Id: I90ae7c5d76dc89cc52ff69cf2a60e27a9314557c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some error messages were printed
outside of the error-checking
if() condition.
Fixes: bd273d4 ("rte_vhost: replace strerror() with spdk_strerror_r()")
Change-Id: Icf965ae56ffc2e0970572308b38607ac63cdb1f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382943
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Values from previous bdev_ios
were reused and were taken into
account e.g. in bdev_io_get_buf()
to check if a buffer is already
assigned.
Change-Id: I239aaf83a4ce8a9342c1820e3ac9e9ccf6a28336
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These #defines are not currently used, and they have equivalents already
defined in spdk/pci_ids.h:
VIRTIO_PCI_VENDORID == SPDK_PCI_VID_VIRTIO
VIRTIO_PCI_DEVICEID_SCSI_MODERN == PCI_DEVICE_ID_VIRTIO_SCSI_MODERN
Change-Id: I0016ab0a26f4aa7ff4a5ee10f66da867b590e0e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
strerror() is potentially not thread safe; use the thread-safe SPDK
wrapper instead.
Change-Id: I5f6f4b0b19a0298b07f71f05aee4574e8b21f5fa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382732
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch also introduces
vq->poller_ctx. It will be later
reused for per-virtqueue task pools
to allow multiple threads using
the same virtqueue.
Since at the time of scanning there
is no I/O traffic, this field is
now being used to keep scan base
pointer. It has to be freed if an
initialization error occurs.
Change-Id: Ia54ee6c8402d38218dc811b4994761105d17269a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for virtio-initiator,
where multiple io_channels have to
share the same virtio queue. A single
poller will receive responses from
a virtio queue and send the completions
to the thread that submitted bdev_io.
Change-Id: I951c7655aaa17d41a680d437661afff27d2c3077
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382200
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The get_lvol_stores RPC had typos in the free_blocks and total_blocks
fields (they were named "free_num_blocks" and "total_num_blocks", which
didn't match the names of the actual variables).
Change-Id: Ib66b04ec2f0c272048a826bfa59338db1d028e34
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382522
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85ce977183be4de9efacb66637e7895f22f58508
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the caller to know which bdev module is exporting the bdev
and therefore how to interpret the driver_specific fields.
Change-Id: I09641645875827eabc0a831fff5b0b5bed6b03d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382519
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The virtio bdev should only attempt to issue SBC commands if the SCSI
device is a block device.
Change-Id: Ib29edbd19f9f34bdafe5ea3f7085c57537134625
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382714
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove some magic numbers from the code.
Change-Id: I494d57331888dd03f0bbff1f6beeac46139d7e96
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382348
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Virtqueues now have to be "acquired"
by a logical CPU core in order to
perform any traffic on them. The
acquire mechanism is thread-safe to
prevent two reactors accessing the
same virtqueue at the same time.
For now a single virtqueue
may be used by only one io_channel.
Support for shared virtqueues will
be implemented in future.
Added new param "Queues" to the
virtio config file for VirtioUser
bdevs. VirtioPci will use the
max available queues num -
negotiated during QEMU startup.
Change-Id: I3fd4b9d8c470f26ca9b84838b3c64de6f9e48300
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377337
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replaced old PMD_*LOG with
* SPDK_WARNLOG
* SPDK_ERRLOG
* SPDK_DEBUGLOG
Added 3 new trace flags:
* virtio_dev - SPDK_TRACE_VIRTIO_DEV
* virtio_pci - SPDK_TRACE_VIRTIO_PCI
* virtio_user - SPDK_TRACE_VIRTIO_USER
This patch also makes error
messages to be printed on
non-debug builds. Some messages
should be still reworded, but
that will be done in a separate
patch.
Change-Id: I2dd4c71dfce20cde0ef010a1d91ac6f166bb2c98
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382620
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Moved their contents to virtio_dev
files. virtio_queue was already deeply
connected with virtio_dev. There's
no need to keep them separate.
Change-Id: I540c04eb954fe0618817c020f9453aebf3d98ba9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382619
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Simplified some code.
Change-Id: I9fc42da93a4c2df3714775d73508de118a5e6b1a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382618
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Several fields in struct virtio_user_dev are not referenced anywhere (a
few have cleanup code but no other assignments); remove them.
Also drop is_vhost_user_by_type() and virtio_user_handle_cq(), which
aren't used anywhere.
Change-Id: I7c80ccbadbd5263a2886dc9028108b898d6485ae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382505
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These are just noise, since we don't enable the unused parameter
warning.
Also remove an unused variable, txvq, in virtio_dev_start() that
had been left behind since it was marked as __rte_unused.
Change-Id: I7bda85ef5f2208dd36d8f1806d8241a04b893123
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382494
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These were included under #ifdef RTE_EXEC_ENV_LINUXAPP, which is not
defined in the SPDK build system, so they were already not getting
included.
Change-Id: I6b90c8230632647bb9237f86ec52c09133891a2d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382488
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Replace the DPDK rte_branch_prediction.h likely/unlikely with
spdk/likely.h spdk_likely/spdk_unlikely.
Change-Id: I51ad42ee2b29b8f33436fa960deda67a0dd0b0f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These are identical now that the spdk_bdev_io I/O-specific unions were
combined.
Change-Id: I2579f4fd100c5ebb3550b806c7fdac38c6160a69
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382373
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If809fe808150498c7ad6797855fda3097e3b0c84
Reviewed-on: https://review.gerrithub.io/382470
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Three new RPC are added, that allow to control pmem pool file.
- create_pmem_pool(path to file, total file size, block size)
- pmem_pool_info(path to file)
- delete_pmem_pool(path to file)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id9025b7d988608957700b41f74874159d18c6ad3
Reviewed-on: https://review.gerrithub.io/379006
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Remove one use of DPDK-specific functions in the virtio initiator code.
Change-Id: I538185270da83674e937dac64c9b1130fab36ac4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This is required for adding
optional params for vdevs.
Since virtio-initiator README.md
had to be changed, some outdated
entries from TODO section has
been removed as a part of this
patch as well.
Change-Id: I472a966d8e4166305fb19ad3ab20e53289a1e071
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382347
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The construct_malloc_bdev RPC method now takes an optional "name"
parameter to request a specific name for the created bdev, rather than
using the auto-generated Malloc%d-style name.
scripts/rpc.py is updated to add the new optional parameter, and it uses
-b/--name to match the corresponding parameter to construct_nvme_bdev.
Also update one of the test scripts to use the new parameter to get test
coverage.
Change-Id: I1f5bf76f406b8ea8a709d856f7624a38fbfa0d5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change it from error_log to debug_log level to
avoid missleading while there does not have
GPT_PROTECTIVE_MBR type.
Change-Id: I51f7bf2994db227b4c9f1bf80d3bb0e05c047e59
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382080
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_opened field in spdk_bdev structure is no longer required.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie4a368425b11b1c2e1a3a48b5858857b3935498b
Reviewed-on: https://review.gerrithub.io/381375
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Idd19b8be38a843dfd50710c09d0c6c31773c2f0c
Reviewed-on: https://review.gerrithub.io/380014
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixed typos, updated comments and
simplified the code.
Change-Id: I7eaa7227518d376d86cd4a6eb0348f1efc7b47fd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382024
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is needed for proper IO channel allocation failure handling.
Change-Id: I795e5bcce5296a52c119d2300974b8cb3fc0d576
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/381187
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Closing the framework has to go through all subsystems
without failure, so return codes are unnecessary.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53c9b4df12d2357e641130869f398b18637e6ff7
Reviewed-on: https://review.gerrithub.io/381681
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It was en empty function before.
Also, don't stop the device in
virtio_user_dev_uninit, the device
is stopped separately before
removing (unititializing) it.
Change-Id: Ib540ee4a55bd3f983b50f35a138c1690daba1d98
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379156
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch also resets each device
before destructing it. This is urgently
required for virtio_pci, as it notifies
the QEMU about our shutdown.
This patch fixes running subsequent
bdev_virtio instances in PCI mode within
the same vhost.
Change-Id: I2569251362f2aaf058f6e44f068b280244bd38c1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
With current SPDK_BDEV_LARGE_BUF_MAX_SIZE
set to 65536, we can allocate at most
4095 16-byte SCSI UNMAP block descriptors.
A single descriptor can UNMAP up to 4GB.
That gives us a hard limit of ~16 terabytes
of data that can be unmmapped by a single
request.
The same limit is also enforced by the
SCSI standard, as the entire UNMAP request
length must be smaller than 65536.
Change-Id: I4d91fa60fd28133a058b87e88a1a14ce662a659a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move local copy of linux header code
to internal include/linux directory.
Change-Id: I81049ff956c72bb32c099a3087cf5f43de911ce4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381275
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We don't support PPC.
Since the code around is changing
let's remove it.
To keep the codebase small.
It's so huge already.
Change-Id: I86b15ae9f6de7b9e612542c8e846aa11047e282a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381624
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Moved virtio backend specific code out
of common feature negotiation path.
virtio-pci features are stored in PCI
register. Before feature negotiation
they can be considered device (host)
features. They have to be negotiated
with local features and written back
into the very same register.
For virtio-user, the situation is a
bit different - vhost-user protocol
contains two feature-related commands
GET_FEATURES and SET_FEATURES. While
SET_ sends already negotiated features,
GET_ always returns device (host)
features.
Previously, we used to store native
device (host) features in local
variables to (ineptly) make the
negotiation path the same for
virtio-pci and virtio-user.
Instead of fixing this functionality,
it has been removed. Now, the
vtpci->get_features might be either
negotiated or not. This is now stated
in this function's doc.
This solution doesn't have any
drawbacks and simplifies the code.
Change-Id: I270e9cad8baaeae61b58992ee06e9069eac10aaf
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381472
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added vtpci_init/deinit() that set up
vtpci_internal for given virtio device.
This patch allows having multiple
devices with different vtpci_ops.
Change-Id: I249999cc24073b3de032db194730f496badd0f38
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381311
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In preparation to replace them with
standard functions. As these macros
are used to assign values as well,
changing them to functions is done
in a separate patch as a part of
reworking vtpci init/deinit.
Change-Id: I4f6398342b06dc9036afece3f902506e9b72a301
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381310
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't support it. It's not
negotiated by SPDK vhost so the
code worked so far.
Change-Id: Ibc515dcc1ebffc6936ee7f5465c4c73001e9b1ed
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381274
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Functionality of resizing logical volumes is currently
a work in progress, thus it is disabled in this patch.
It is no longer possible to use RPC and lib functionality.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I518e7196096f52e3ad9e91d658e1bb6c3301b688
Reviewed-on: https://review.gerrithub.io/380916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently there is no way to know total space availible on lvol store or
how much is left after creating lvol bdevs.
Four new fields should were added to get_lvol_stores:
- total number of blocks
- number of free blocks left
- block size (currently always 4096, but should be known to user)
- cluster size
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I93dec2d4b2843f0ee51dc9883c8451cf55353f7b
Reviewed-on: https://review.gerrithub.io/381131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
New optional parameter -c or --cluster_sz in construct_lvol_store() RPC,
as well as in vbdev_lvol and lvol lib API.
This parameter allows to configure cluster size of blobstore that lvol store
is build upon.
When this parameter is not specified, default of 1GiB is used.
spdk_lvs_opts struct was created to facilitate any future options when
creating lvol store.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibfe8765ede3e78ff19c36f46043e4cec2e5c9f97
Reviewed-on: https://review.gerrithub.io/379356
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
It's not used anywhere. There's already a
vtpci->set_status(RESET) equivalent that
does the same.
Change-Id: I0f04ba094848806c647ede4be2ef77b423ead288
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379337
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This makes us open only as many descriptors as we need.
Change-Id: I2dbce218efdd37f015a0d4b250be9539373c6028
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379336
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Also add a unit test that reproduces the original issue and passes
with the one line fix.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I120d42ba7b6cfa4a2cb11e6cc08885d95316fe81
Reviewed-on: https://review.gerrithub.io/380703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This puts responsibility on the caller to free the buffer
and do any other cleanup associated with the partition base
(for example, GPT buffer).
While here, also clean up a bunch of places where on
various failures during initialization, it would just
free the buffer instead of calling spdk_bdev_part_base_free().
The latter is required to make sure the bdev descriptor
gets closed as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic000339459eca4a4a1d103da2e1f3feffe7e764f
Reviewed-on: https://review.gerrithub.io/378653
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At very high queue depths, bdev modules may not have enough
internal resources to track all of the incoming I/O. For example,
we allocate a finite number of nvme_request objects per allocated
queue pair. Currently if these resources are exhausted, the
bdev module will return failure (with no indication why) which
gets propagated all the way back to the application.
So instead, add SPDK_BDEV_IO_STATUS_NOMEM to allow bdev modules
to indicate this type of failure. Also add handling for this
status type in the generic bdev layer, involving queuing these
I/O for later retry after other I/O on the failing channel have
completed.
This does place an expectation on the bdev module that these
internal resources are allocated per io_channel. Otherwise we
cannot guarantee forward progress solely on reception of
completions. For example, without this guarantee, a bdev
module could theoretically return ENOMEM even if there were
no I/O oustanding for that io_channel. nvme, aio, rbd,
virtio and null drivers comply with this expectation already.
malloc only complies though when not using copy offload.
This patch will fix malloc w/ copy engine to at least
return ENOMEM when no copy descriptors are available. If the
condition above occurs, I/O waiting for resources will get
failed as part of a subsequent reset which matches the
behavior it has today.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iea7cd51a611af8abe882794d0b2361fdbb74e84e
Reviewed-on: https://review.gerrithub.io/378853
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use SPDK bdev subsystem to allow basic IO to pmem pool
using pmemblk_* calls.
New pmem bdev can be constructed using RPC call
construct_pmem_bdev PMEM_FILE
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If5ca94161fe53644b8fccd3b77de5479da1b2e55
Reviewed-on: https://review.gerrithub.io/376973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
virtio_dev can now be freed via virtio_dev_deinit.
While here, also rename virtio_init_device to
virtio_dev_init for name consistency.
This patch also adds some error-checking.
Change-Id: Ic1222756b8686fbd8a14d8631f25525249529e1d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379335
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added virtio_hw->pci_bar[6] to store information
about mapped memory regions. They have to be
stored to make it possible to unmap them.
The unmapping itself is done in a separate
patch.
Change-Id: I5dcffd0674e855a02086b3d8e4adc5fac451229a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380779
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Generic virtio_dev has the same field already.
The field was previously used to store vhost-user
GET_QUEUE_NUM response, that will be later assigned
to virtio_dev->max_queues via virtio_user_read_dev_config.
This patch removes virtio_user_dev->max_queues
with entire virtio_user_read_dev_config functionality
for virtio_user.
Change-Id: I508f728215a95cf977d6b0b20350fcf2ae11fe3a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379155
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replaced direct DPDK calls with SPDK env/pci
equivalents. This patch also makes the PCI scan
happen only conditionally when user has
configured proper field in the bdev_virtio config
file.
Change-Id: Ib6ad81d0b421b20ad0cd9d02cb40b2213af823e6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379489
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The same condition is already checked
in spdk_bdev_free_io().
Change-Id: I31f937036d3835e2d16633c6338ebca1a2237de9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379722
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also updated docs.
Change-Id: I2e53c31b2c9c575d8adea23ed92f113e69f324ed
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current UNMAP implementation supports only
up to 2^32-1 unmapped blocks per request.
Change-Id: Ib473831fa32aaba465f76694afad71137288a73a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for upcoming UNMAP implementation.
Change-Id: I81fb744e0813121cebd64aa60a03a80bfbecc94d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377421
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required for upcoming UNMAP
implementation in bdev_virtio.
While here, also added documentation for
spdk_bdev_io_get_buf().
Change-Id: Ia769ee9b8b132f31208ae66598b29a1c9ed37312
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379721
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_unmap_blocks() accepts a 64-bit number of blocks, which can
exceed the NVMe Dataset Management range's 32-bit number of blocks,
which can represent up to 2 TB with 512-byte blocks.
We can support up to 0.5 PB unmap requests by using the maximum number
of descriptors in a single Dataset Management command, which should be
sufficient for now.
Change-Id: I0a4ee77a9be148355991e1a081007ffa020a3ee5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds hotremove support of lvol base bdev
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I04dc7a0cc73fd6959824873f354d5c7db8c09a9b
Reviewed-on: https://review.gerrithub.io/379348
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is in preparation for enabling hot remove of logical volumes when
their underlying blobstore device is hot-removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I310a3f64f0de5d628609c20a1a3b4d38df0755aa
Reviewed-on: https://review.gerrithub.io/377041
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously incorrectly it was assumed that cluster size
was always to be 1MiB. For most evident example of this
please see spdk_lvol_create() sz > free_clusters comparison.
This is now fixed and lvol->sz was changed to lvol->cluster_num.
It was done to increase readability - only dealing with
number of clusters when creating or resizing lvol.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If8cdbad18978319e57b6952dbf5a55d56785f108
Reviewed-on: https://review.gerrithub.io/380467
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch allows unmap bdev_io to
be used with spdk_bdev_io_get_buf.
bdev_io->iovs/iovcnt has been zeroed-out for other
I/O types to overwrite any previous values/pointers.
Change-Id: I570a4d82d9e4db6630a6831b1aab3259fb46cdd8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377687
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now bs_dev is destroyed only in two instances:
- within spdk_bs_init() on failure path
- vbdev_lvs_create() if spdk_lvs_init() errors out,
before even calling spdk_bs_init()
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7b8af39fbe83907b0c47797f0f55ca3b941729d9
Reviewed-on: https://review.gerrithub.io/379848
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ic094c34f1dc9063f12df80d77b2c70ebae9a4977
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380066
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I46d564523ea20bc7c79a3896dfb024d3d5172a93
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/379911
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Until now we queued all IO to hardcoded
SCSI target 0.
Change-Id: Iefb229899725f53f26e927c4fb23e8d1d613c187
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379840
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_module_init_done could be called
multiple times when more than device
is available.
Change-Id: I17ee63a818945359648953c4f8f67678d10e8907
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new struct virtio_driver together
with it's global instance. The struct should
keep all bdev_virtio related information.
Change-Id: If78967c68c4131c89cd86cb4b46f5f0194bca323
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A mid-step towards porting virtio_pci to
use SPDK env/pci layer. See the next patch
for details.
Change-Id: Ia7cb417415bce686c3a888f949853834ddf6c7a6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379488
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK env/pci layer does not provide equivalent
call to actually map all pci resources. This
patch will smooth future transition of rte_virtio
to SPDK.
Change-Id: I7a67c46a99824be83875385703dd6bbf0ec9645e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380001
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixed memleak on vbdev_gpt_read_gpt failure.
gpt_base->ch was never freed.
Change-Id: I97f6e433b26ab95253eac4753b68083f3433547b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad98baef576fe3d843967d0c02e9922dfc347830
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This code was still using an old paradigm of returning the
number of bytes associated with a successful submission.
Just return 0 on success instead - if caller needs the
number of bytes for some reason they have the information
to get it.
While here, return an appropriate negated errno where possible -
we especially want ENOMEM returned when an ioat channel runs out
of descriptors.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5858ccd6cff916b6c80fda7d2c9fce96fb39ef89
Reviewed-on: https://review.gerrithub.io/378858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some of the internal functions used to return the
number of bytes associated with a successfully submitted
IO, but that was changed a while ago to just return 0
for success.
So change some of the callers of these functions to
just look for != 0 for failure rather than < 0. This
preps for some upcoming ENOMEM handling changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0a66dd6bfac9053e0fd6103dee1ea36b20d902df
Reviewed-on: https://review.gerrithub.io/378856
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I374910a7d5ecf0125228d0c99ab523804956ca78
Reviewed-on: https://review.gerrithub.io/378852
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces per-channel flags to keep state of information
needed in the primary I/O path. Setting/clearing of these flags
should only done through an spdk_for_each_channel() call. Currently
there is only a RESET_IN_PROGRESS flag defined but more may be added
in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia81817e2dabc9997c12beebae72fb129cb5dcf9a
Reviewed-on: https://review.gerrithub.io/377828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was removed in NVMe 1.2.1 ECN 002.
Change-Id: Icacd53c1f33043cf1c9f30bff1fb9dce1efa69b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It does not seem nessecary to include it, when this it used just once
in lvol disk creation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I42ead55329f0ac7e55bb73702d071f118a5c7931
Reviewed-on: https://review.gerrithub.io/379678
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To increase readability, union in spdk_lvol_store_req is now split
into four separate structures.
As well spdk_bdev from lvs_basic/spdk_lvs_req was removed as it was
not needed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I65c5155f3d15151a97cf8f8e425b26aa1966b677
Reviewed-on: https://review.gerrithub.io/379169
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ife45dc8e27d767b9f09b67e7fae3b94837a14491
Reviewed-on: https://review.gerrithub.io/379458
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Now that the bdev_io read and write branches of the union have been
unified, the virtio-scsi bdev I/O code can be simplified a little bit.
Change-Id: Iadbe55862770a1b0e7f854b724a70d94c704218e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379696
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, we naively assumed that a completed
reset was the reset in progress, and would
unilaterally set reset_in_progres to false.
So change reset_in_progress to a bdev_io pointer
instead. If this is not NULL, a reset is not in
progress. Then when a reset completes, we only
set the reset_in_progress pointer to NULL if we
are completing the reset that is in progress.
We also were not aborting queued resets when
destroying a channel so that is fixed here too.
The added unit test covers both fixes above - it will
submit two resets on a different channels, then destroy
the second channel. This will abort the second reset
and check that the bdev still sees the first reset as in
progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61df677cfa272c589ca03cb81753f71b0807a182
Reviewed-on: https://review.gerrithub.io/378199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upper layers are not supposed to put an I/O channel if there
are still I/O outstanding. This should apply to resets as well.
To better detect this case, do not remove the reset from
the channel's queued_reset list until it is ready to be
submitted to the bdev module. This ensures:
1) We can detect if a channel is put with a reset outstanding.
2) We do not access freed memory, when the channel is destroyed
before the reset message can submit the reset I/O.
3) Abort the queued reset if a channel is destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c03eee8b3642155c19c2996e25955baac22d406
Reviewed-on: https://review.gerrithub.io/378198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This provides an alternate path for submitting
resets to a bdev module, in preparation for some
future patches where we will want to avoid
reset-specific checks in the main I/O submission
path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833c01cc33940771b4265f963cfb9de61c5f1faf
Reviewed-on: https://review.gerrithub.io/378670
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We will use this typedef for some additional use
cases where are not specific to the need_buf
functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d18c7ac037ab4b0ba612f308b9ca38538d112b1
Reviewed-on: https://review.gerrithub.io/378197
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Since all direct bdev_io types have the same layout,
there is no need to keep them differentiated.
Change-Id: If8bb85e43c9922c0ebfc39837e3a45006e508b56
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377686
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Added READ CAPACITY (10) support.
This is a work towards supporting both (10) and
(16)-bit SCSI commands.
If READ CAPACITY (10) returns 0xFFFFFFFF as max lba,
a READ CAPACITY (16) is sent.
As specified in SBC-3 5.10.2 READ CAPACITY (10):
```
If the number of logical blocks exceeds the maximum value that is able
to be specified in the RETURNED LOGICAL BLOCK ADDRESS field, the device
server shall set the RETURNED LOGICAL BLOCK ADDRESS field to FFFFFFFFh.
The application client should then issue a READ CAPACITY (16) command
(see 3.27) to retrieve the READ CAPACITY (16) parameter data.
```
Change-Id: If82bc45e904e91d95b124724e895350098337ae9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377091
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added separate function for allocating virtio_scsi_disk.
This is required for the upcoming 10-bit SCSI command
support changes.
Change-Id: Ib60bfe003f37d796387944b04494baf2a77a6558
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch also sets virtio_dev->modern for vhost-user
devices.
A word of explanation of what's happening now:
For virtio_pci, dev->modern is set when reading config,
as legacy devices have no Virtio PCI Capability in their
capability list. For virtio_user, the dev->modern should
be set if VIRTIO_F_VERSION_1 feature has been negotiated.
Change-Id: I056b1dcf65a5a6a87cda6499771399befdc59cb5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377090
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Moved negotiation to virtio_init_device.
This patch also cleans up feature negotiation a bit.
Change-Id: Ia67e8d694a5acebcbe37679a657d68d6c46979db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377089
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e550a879b50af0de476583f5efd4e0518667662
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/379213
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This restriction causes bdevs examination/discovery to fail
when there are asynchronous operations. We should remove this
limitation for now. Future plan is to implement approach
similar to the one that is present in kernel.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibe5572297672022412d25a4a835dc9527ce97f3e
Reviewed-on: https://review.gerrithub.io/378758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch shows UUID and base bdev for logical volume stores
when get_lvol_stores() RPC is called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idbd0bc6c4a0334e5af8d4a674a203ddb2270f3e4
Reviewed-on: https://review.gerrithub.io/374604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously virtio_hw was managing both VirtIO PCI and
vhost-user devices. Now's there virtio_dev, a common
part for both backends. virtio_hw is only used for PCI.
Note that this patch does not introduce another
abstraction layer. It only unifies an already existing
one. Previously virtio_user_dev was built on top of
virtio_hw, with most PCI fields just hanging there
unused. Now both, virtio_user_dev and virtio_hw are
built on top of virtio_dev.
Change-Id: Ida25defc0063055a81cf4039c9b85470b9880bc3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376966
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes unnecessary if (hw->virtio_user_dev)
conditions. It also makes vq_ring_mem explicitly
a physical address. There's already a separate
vq_ring_virt_mem field that's used for vhost-user.
Change-Id: Ie8d97458744b4e3ae9d0e3d72b28d29f19179706
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376965
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
All rte_virtio filenames have virtio_ prefix now.
Change-Id: I42018624606d68997a0e982e7b622d6a23e3c190
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376624
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia96ae78ff9530d953181ac5f7255a38f3c8ec430
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/375392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes: 5f6306ea24 ("bdev/gpt: free base bdev_part in gpt after
examining")
Change-Id: Ia9cd64127f435b1b40f6a34b6e5166b329924ed6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch also fixes segfault on startup when using
a PCI device as a DPDK secondary process.
Change-Id: I93116ae207649fae2fb3461d32d04a98cecb4cf6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376622
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't allow enqueueing a request when not
enough free descriptors are available.
While here, also clarify some other
vq_desc_tail_idx code.
Change-Id: Ibcec2e31b2f609f2fd71f2426ce1a91728ed82f6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378154
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was broken by commit 157969b60e.
However, this change doesn't fix any errors.
Neither vq->vq_free_cnt nor dxp->ndescs are used at the moment,
but this will change with future patches.
Fixes: 157969b60e ("bdev_virtio: added virtio_scsi_io_ctx")
Change-Id: I215d437c52f7060bf631bd193e7e59e2a4710368
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378116
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures that we don't run out of free descriptors
and queue entries.
Change-Id: I3c6960564032ffce6e6b6bf887e8c5e12fdf3205
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev_virtio I/O poller used to interfere with scan poller.
e.g. GPT read could be picked up by scan poller.
Even if such request is instantly rejected, this would cause
both GPT and scan to fail. Instead, defer bdev_register
until after the virtio_hw scan has finished.
I/O poller logic will still have to be greatly refactored to
add proper multiqueue/multibdev support. However, this patch
lifts scan processing responsibility from any I/O pollers.
Change-Id: I201de8aa0dc1db71ed836fd5e74d55604950f271
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently GPT keeps the bdev it is examining open, even after determining there is no GPT on it.
It is due to spdk_gpt_base_free() not notifying bdev layer to free base bdev_part.
Additionally release of bdev module for that bdev was moved to bdev_part_free,
as the module is not claimed until bdev_part on base bdev are created.
Functional tests added to verify the changes.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id75f88259267847e8ec476d19750dc1e2690f11a
Reviewed-on: https://review.gerrithub.io/378621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reported-by: Cunyin Chang <cunyin.chang@intel.com>
Change-Id: I94ec3a5f43839f1fa4379d2f275c4e19f81e1a52
Reviewed-on: https://review.gerrithub.io/378003
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This moves towards the ability to queue ios while
a reset is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibb8efbcec3931f966eb43030ea91945dfaaa5a77
Reviewed-on: https://review.gerrithub.io/377827
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First, improve packing of spdk_bdev_io. Move any
fields which must be zeroed into the first cacheline.
Also change type and status from enums (needing 4 bytes)
to int16_t which is still a far bigger range than
needed.
Next, modify spdk_bdev_get_io to only zero the
first cacheline (actually a bit less).
SPDK_BDEV_IO_TYPE_INVALID is also added, making it
explicit that 0 is an invalid value for the IO type.
Previously this was somewhat inferred.
There are still additional improvements that can
be made to this area - primarily combining
spdk_bdev_get_io() and spdk_bdev_io_init() into
a single function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1916d6d5db02c93622b9725ec1095148e3f384d8
Reviewed-on: https://review.gerrithub.io/377799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_io_submit() always returns 0, so the return
value is unnecessary. This eliminates a slew of checks
on that return value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I493ecefc7b72d3b3a44bd92df70bd5c653453ff0
Reviewed-on: https://review.gerrithub.io/377627
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We no longer support resubmitting an existing I/O to
a lower bdev. This enables accurate tracking of I/O
at each bdev layer for purposes of reset handling and
QoS.
__submit_request() in bdev.c is now only called
from spdk_bdev_io_submit(), so just collapse these
two functions together while we are here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b46df42b1a6476f9dbd8c61dd3380dbd145315d
Reviewed-on: https://review.gerrithub.io/377626
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This follows similar recent changes to bdev/split.
Future patches will move quite a bit of duplicated
code between these modules to a set of helper functions,
so doing this renaming will make those future patches
more clear.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic67ee03d68b3080b7083ba3d91505f0ddf06da7b
Reviewed-on: https://review.gerrithub.io/376443
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
split, gpt and error all have a lot of similar code, and
are based on the presumption of one or more "partition" bdevs
on a "base" bdev. This results in quite a bit of duplicated
code between these three bdev modules. The error bdev
module does follow this same model - it just always has only
a one-to-one mapping between the error bdev and its base bdev.
As all of the modules move to allocating their own bdev_io
rather than allowing for adjusting an existing bdev_io and
resubmitting it, there will be even more duplicated code
between these modules.
So this patch adds a set of helper functions in the common
bdev library to eliminate all of this duplicated code.
This patch also moves the split module to use it - future
patches will also convert gpt and error.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8032331b46c32da9fca18a077580ccb274c6204
Reviewed-on: https://review.gerrithub.io/376423
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes some functions that were only called from
one place, to reduce the number of functions that will
need to get moved to the common bdev library in a future
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieaaf9f1fdc907591902ce543024d547a70d00b7f
Reviewed-on: https://review.gerrithub.io/376422
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Make sure DEBUG macro is not defined while processing log macros,
otherwise DEBUG (which should be passed as is down to RTE_LOG and
concatenated with RTE_LOG_ prefix) gets substituted too early:
In file included from /spdk/dpdk/build/include/rte_debug.h:46:0,
from /spdk/dpdk/build/include/rte_pci.h:85,
from rte_virtio/virtio_dev.c:48:
rte_virtio/virtio_dev.c: In function ‘virtio_init_vring’:
/spdk/dpdk/build/include/rte_log.h:333:11: error: ‘RTE_LOG_1’ undeclared (first use in this function)
rte_log(RTE_LOG_ ## l, \
^
rte_virtio/virtio_logs.h:41:2: note: in expansion of macro ‘RTE_LOG’
RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
^
rte_virtio/virtio_logs.h:42:31: note: in expansion of macro ‘PMD_INIT_LOG’
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
^
rte_virtio/virtio_dev.c:82:2: note: in expansion of macro ‘PMD_INIT_FUNC_TRACE’
PMD_INIT_FUNC_TRACE();
While at this, change format string type specifier to the correct one.
Change-Id: I7f7bda105aa00b99bea4ea5f6a9bff268940a557
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Reviewed-on: https://review.gerrithub.io/377945
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I inadvertently misordered the arguments in a call to spdk_bdev_unmap.
This call is unused as of this patch, but is used by future patches.
Change-Id: I6042a3f4e05bded21b0ceb4d3b104856bcbf8c12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/377961
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There remove callback function will remove the nvme_bdev from the global
list, we do not need to remove the device in the function bdev_nvme_destruct().
just make sure to remove it from list when the app exit.
Change-Id: I1859bfd696ed9c0ca3ac1cd8ffadfd9488df0fcd
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/375941
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There's no need to keep a copy of that file.
Use system include instead.
Change-Id: I07bfb7c5de57efaa420a9fe38408c8ef230110f3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376350
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The field was set, but unused. virtio_hw already has
max_queues field. Since SPDK rte_virtio does not provide
any virtqueue abstraction nb_tx_queues and it's setup
functions are not needed.
Change-Id: Ib9bbdc86e6b6cede13a6cc251331590d6985db66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Save us some allocations and fix
scan_target() error handling path
Change-Id: I29fe18a6e592c7fd32d0486f831f6b053f59b561
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add new versions of all of the I/O calls that take parameters in blocks
instead of bytes. These are intended to replace the old APIs, but
we'll keep them for now to preserve compatibility.
Change-Id: I85ab665c653e8c697016c628837d49aa0c3bfcd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The bdev modules now take all read, write, unmap, and flush requests in
terms of blocks rather than bytes.
The public bdev APIs still accept offset and length in bytes for now.
Change-Id: I57f0955d52272f57755f0ff4dbc56721fdc2ef51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Target enumeration now uses separate poller to receive virtio
response messages. A special virtio_scsi_scan_base struct has
been added to keep track of how many targets we still have to
receive response from.
Making target scan async allows other pollers to run while
bdev_virtio still has to wait for a response.
Change-Id: Ia9af9d61fb4f880d0535df0b18aa443fff6dc9be
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In preparations to make it asynchronous.
Change-Id: Iab651974841d83cf36b8e050e3905638f88ad992
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev_virtio requires us to do SCSI inquiry for
each device and wait for a response. It currently
polls inline for this response, taking up entire
reactor exclusively. Making it async would allow
other pollers to run while bdev_virtio still has
to wait.
Change-Id: Iefc88e0a2efb5b791ffe23b2e623b7c50d759084
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_init_complete could have been called twice.
While here, also simplify bdev_initialize error path.
On allocation failure, bdev subsystem will now finish
with bdev_mgr->module_init_complete set to false.
Fixes: 7fefd60fab ("bdev: make module init synchronous again")
Change-Id: Ia4b5d571d26beb34f0e6c0f4c7b3176215eec69f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375572
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Issue each I/O to the base bdev as a new discrete I/O rather
than resubmitting the original I/O. This enables some
upcoming changes to better handle queueing and reset-related
work at the generic bdev layer, which will also deprecate
the resubmit I/O logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic1caa89014981e948edfec5e8eaaacd41a73d49c
Reviewed-on: https://review.gerrithub.io/375495
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it consistent it with other parts of this structure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie36488813b53ce20663c50a5c9f049c4c9723d3a
Reviewed-on: https://review.gerrithub.io/375494
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) Change each split_disk to just point to a
split_base structure and drop the extra base_bdev
member. We can get the bdev from the split_base.
2) Simplify the names a bit for some of the members:
split_base::base_bdev to split_base::bdev and
split_disk::split_base to split_disk::base.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia8621b19ad09324d939ed43d79900fecb18291e6
Reviewed-on: https://review.gerrithub.io/375493
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gencnt is no longer really used since there is no more
differentiation between "soft" and "hard" reset. The
original idea was that a hard reset would complete I/O
known to the bdev layer even if the underlying bdev
module had not actually completed it yet. We do not
actually support that concept, and it was a bit flawed
anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa2c85bb474c7dd55eb7386d6cad5079f5edbccc
Reviewed-on: https://review.gerrithub.io/375484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I/O requests are now allocated from bdev_io memory.
virtio_req->iov now points to raw payload, request and response
iovectors are available as separate fields. This solution
should apply for both vhost-scsi and blk.
Change-Id: I588fbdd7fc5442329aadbcb3e31b2f4a7118ec8f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixed various minor bugs and removed unused code.
Change-Id: I24d3f10a494b9f9c69f45e888c7e1511adc268bc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375004
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixes a GCC 7 warning:
rte_virtio/virtio_user/vhost_user.c: In function ‘vhost_user_setup’:
rte_virtio/virtio_user/vhost_user.c:439:46: error: ‘%s’ directive output
may be truncated writing up to 4095 bytes into a region of size 108
[-Werror=format-truncation=]
snprintf(un.sun_path, sizeof(un.sun_path), "%s", dev->path);
Change-Id: I147c9efe93cc6ce9370da6443f181f916457e3e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Supports both PCI mode (for usage in guest VMs) and
vhost-user mode (for usage in host processes). The rte_virtio
subdirectory contains a lot of code lifted from the DPDK
virtio-net driver. Most of the PCI and vhost-user code is
reused almost exactly as-is, but the virtio code is drastically
rewritten as the DPDK code was very network specific.
Has been lightly tested with both the bdevio and bdevperf
applications in both PCI and vhost-user modes.
Still quite a bit of work needed - a list of todo
items is included in a README in the module's directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85989d3de9ea89a87b719ececdb6d2ac16b77f53
Reviewed-on: https://review.gerrithub.io/374519
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow passing the NVMe namespace optimal I/O boundary through the bdev
layer.
Change-Id: I27a2d5498df56775d3330e40c31bd7c23bbc77a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When users don't enable hotplug option in their configuration
section, SPDK will enable it by default. DPDK will print probing
messages continuously for NVMe devices which don't belong to SPDK.
Change-Id: I8c43335a282ecba206b4b5305bd881d2bd07836e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/374486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Report the Ceph pool and RBD name in the get_bdevs output for RBD bdevs.
Change-Id: I0e9be0b540e90503ce052c968f979b5887673c24
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this iteration, we only support write_zeroes in the form of a
deallocate call that returns all zeroes.
Change-Id: Ica837ce70672174df63012719de60463fdb799cf
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372005
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add functionality to the bdev layer to handle the nvme write_zeroes
function.
Change-Id: I0dadad273b28c16db5a2275f7d8d57e98253a8d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372171
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I0e8c34237acc88fb51bac56c2f99df52ec199f9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373835
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The construct_aio_bdev RPC still accepts "fname" for backwards
compatibility.
Change-Id: Ibf44f5f3667c6de4b827f7f3f8787aff0a6c4fc9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ac636c18d7e71e0184d4f67ec54a36217a11db0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373833
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disk size in bytes is only used within create_aio_disk(), so we don't
need to save it in the struct file_disk context structure.
Change-Id: I63d230448a67c2b49c57eac2b4d44dce27c303cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a file-backed AIO bdev to test it out.
Change-Id: Ifdf206bbdf6cae9379fdc02c80755e96a7198bce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia2202eadfb8140b7a51dd64d4241e85aceff361c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the redundant sector size check; the generic bdev code already
checks for this.
Also use the bdev blocklen field for both offset and size calculations.
The bdev blocklen is the same as the namespace sector size.
Change-Id: Ia8061eb4cfc229d4b6fbe2caabf2dd81656bc697
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372862
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33506d6b9ff09c45c057326f7339d742eebc45b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Swap the meaning of the return value to match the name of the function.
Change-Id: I89dc09e3b309a06586adf2ab750092f06077ffd9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372859
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the iSCSI and GPT CRC32 functions into generic library
functions.
Change-Id: I1f1a5f3968a983b663a51bd984500492eeb12605
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370765
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id004e06eea8dfb5d7be24282bfe4d31069ff6573
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An I/O completion callback may delete the channel, so
restructure the poller to avoid touching channel memory
while triggering completions.
Change-Id: I612f10ff172481084386c9a3056fdd5e2f19e854
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370526
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the poller to tolerate channel deletion within
an I/O completion callback. This won't happen today
because channel deletion is always deferred, but
prepare for that case.
It turns out this is simpler anyway.
Change-Id: Ibff23d84fe14247849e95cebc3c80369812bdd6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370525
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The protective MBR entry may not be the first one. This is already
handled correctly when comparing the total size field, but the start LBA
field was always looking at the first entry.
Change-Id: Ie54e424b2e9cb546b1ed04192662936e04e08b6b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If3cd7ee8251b5e311d5e1e9210085f8c2cbc83e1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary headers and order the remaining #includes correctly.
Change-Id: I6b331aa1514e55e7bf56a07be23f630e4ae3fcdb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370731
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The message printed when start_lba doesn't match the expected value
would print byte-swapped values on big-endian architectures. On
little-endian architectures, the problem would not be noticeable, since
the conversion doesn't do anything.
Change-Id: I9e8d4485b5710f4333d04bb006bc204416c689cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev could be unregistered multiple times when all it's descriptors have
been instantly closed via it's remove_cb without any deferred
event/poller
Change-Id: I128716077b0512c6334bdd113220684f8cfcbecb
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370949
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch afe860ae deferred freeing the io_device. However, for nvme, the
io_device context (spdk_nvme_ctrlr) is still being destructed before
io_channels are destroyed, causing segfaults on hotremove.
This patch defers io_device context destruction and fixes nvme
hotremove.
Fixes: afe860aeb1 ("channel: Correctly defer unregisters if channels exist")
Fixes: 5533c3d208 ("util: defer put_io_channel")
Change-Id: I7af699174cac0c6c6a6faa2cc65418c47347eb9a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Hotremove event was detected on base bdev, but wasn't propagated to
vbdevs. This patch makes base bdev destroy all it's children once
hotremove is triggered. This fixes hotremove segfaults and adds full
support for split/gpt hotremove.
Change-Id: I7f8b0b109ef237783b6b2e33a18f68c59a8bbe72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367824
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch also releases bdev module and closes claiming descriptor on
regular split base destruction.
These problems must've been overlooked in patches 26d6770f and be9a3b9f.
Fixes: 26d6770f1c ("GPT: add GPT bdev support")
Fixes: be9a3b9f69 ("bdev: pass descriptors for I/O operations")
Change-Id: Ib47e2c4d3b99c6d3f2dbe7ef01be81ca3dd97341
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370181
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was probably overlooked in patch be9a3b9f.
Fixes: be9a3b9f69 ("bdev: pass descriptors for I/O operations")
Change-Id: If29ad65ac168f3dbf7e1602f26f939dfbf17599a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie25a87c4b3f781299fa744fdcff6c9a63d473935
Signed-off-by: Roman <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/365723
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Otherwise we'd fail sanity checks when closing the claiming descriptor.
Current approach works because we never close the claiming descriptor.
Fixes: 4fc7e66614 ("bdev: add vbdev claim/release semantics")
Change-Id: I1c1f0c11450e749419726df460334ab97b43b584
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370179
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When device has more than one open descriptor, remove_cbs of particular
descriptors could be called more than once.
Consider the following scenario:
bdev X with 2 open descriptors A and B.
X is removed (hotremoved for instance)
bdev_unregister(X) is called
* bdev->status = REMOVING
* A->remove_cb is called
* some poller is started
* B->remove_cb is called
* another poller started
* poller from A->remove_cb finishes it's work and closes the desc:
* bdev_close(A)
* A is removed from bdev->open_descs list
* bdev->status is REMOVING, so bdev_unregister(X) is called again!
* B->remove cb is called again!
* another poller starts? segfault?
Fixes: 57d174ff67 ("bdev: add spdk_bdev_open/close")
Change-Id: I0a898ec0aee521d0b2a1168fe7d469cc41a8ef4f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/369727
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
GPT uses the standard IEEE CRC-32 polynomial, not CRC-32C.
Change-Id: I94dae01ec7b31cb3c3efc735d9dfa4e0cfea9ce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369306
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We still will sort the bdev_module list so that modules
with an examine() callback are initialized first. This ensures
they have a chance to initialize before later modules start
registering physical block devices.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I792cfb41b0abe030fe2486a2c872cbf329735932
Reviewed-on: https://review.gerrithub.io/369486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Module initializaiton was made asynchronous recently
to support bdev modules like gpt which need to do
asynchronous I/O. But all modules now do any
asynchronous I/O in their examine() routines, and
init functions only do very basic operations to be
ready to handle examine() callbacks.
So simplify the bdev code and modules to go back to
a synchronous init procedure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb16156796ad7511d00f465d7a2db9acda6315b6
Reviewed-on: https://review.gerrithub.io/369485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vbdev modules still open/close bdevs as normal, but
should open bdevs read only when tasting (i.e. reading
the GPT to see if there are SPDK partitions). When
a vbdev module is ready to claim the bdev for purposes
of creating virtual bdevs on top of it, it calls
spdk_vbdev_module_claim_bdev(). It can pass its
open descriptor as well to have it promoted to
write access (required for future vbdev modules like
logical volumes).
Note: error vbdev was changed to copy the base bdev
parameters one-by-one instead of a blind memcpy - we
do not want to copy the base bdev's vbdev_claim_module
into the new bdev!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2ee67dc78daf96050343c473671aa3402991bb1
Reviewed-on: https://review.gerrithub.io/368628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1899a47fa9d9821c16ea648bbe3290f6306d0e3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368626
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows vbdev modules to be ready for examine
calls for (physical) bdev modules when the latter
initialize.
This requires the following modifications to existing
bdev modules:
1) error and split now search their config sections
at examine time (instead of init) to see if the
bdev should be consumed by the vbdev module
2) gpt is simplified considerably - it no longer
needs to save bdevs to examine when
gpt initializes later
3) nvme must register its io device before registering
the bdev, since vbdevs may immediately start trying
to send I/O to the new nvme bdev
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8fe5686092ffb15fc8bdbc068b09add229d9da6c
Reviewed-on: https://review.gerrithub.io/368598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add additional fields to the g_bdev_mgr to enable
deferring spdk_bdev_init_complete when modules have
finished initialization, but vbdevs are still processing
examination callbacks due to asynchronous I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12dc7cb08e44e022b5bad75ba9a946571eb65957
Reviewed-on: https://review.gerrithub.io/368832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new spdk_vbdev_module_examine_done() API which
vbdev modules can use to notify the generic bdev layer
once a base bdev examination is complete.
This is especially required for asynchronous vbdevs
like GPT which must issue I/O to the base bdev.
As part of this patch, add examine callbacks
for both split and error, which for now only call
this new functions. Later patches will move code from
the init callback to the examine callback for these
modules. examine callbacks are now required for all
vbdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f2d012d1675b878bcd23afff427c740c6502c7
Reviewed-on: https://review.gerrithub.io/368831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eliminates overloading of the term "register"
in the context of bdevs, as well as opens up the
idea of examining bdevs not just when they are
registered, but also after they are closed with
write access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e15f9dc0fa4e02214f188f987f9da2dbc8db1f7
Reviewed-on: https://review.gerrithub.io/369042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3051b63942770e45be22af0ae03a78a7c543f81
Reviewed-on: https://review.gerrithub.io/368597
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96cf4e40e8218c6ba150fe9ffead58340c7bdf6a
Reviewed-on: https://review.gerrithub.io/368627
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a name parameter to the MODULE_REGISTER macros, and then
modify each bdev module to pass a string for its name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If878617ce3c3eacfcf5df44ed6f194f11c66f78f
Reviewed-on: https://review.gerrithub.io/368596
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibb28b8432c94e70f522bdf34c5f4a10e4c25a8bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368610
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are UEFI-style GUIDs in little endian byte order, not standard
UUIDs.
Change-Id: I4d61afa2901830c784c24a5e039bba1d98f32e62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Fix the partition type GUID comparison to actually look at the partition
type GUID, not the unique per-partition GUID, and fix the test to match.
Change-Id: Ie64f1effcc75883f17ccf6240f6469161d2a5aa5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368606
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It should not print error if there is no GPT
signature
Change-Id: I6e5f8d31aed62dfb420f0ff0560bfbf8a7e8afb3
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/368476
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The purpose is to store which partition is used from
the original bdev, and it can be used to read
the further partition entry info.
Change-Id: Idbc4452846e88b486ff281c288704af80938788a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/368486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will enable asynchronous request handling in a future patch, and it
also removes the need for the RPC handlers to know about request id and
the JSON-RPC rules about notification-only requests.
Change-Id: I25aaa8e48bff8d5594ffcccecb61842b1e31ec3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6a138e1c1d775e8c8bfeede9600f8b0f799ecdad
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each virtual bdev now has a pointer to its base
bdev, and a base bdev has a pointers to any virtual
bdevs built on top of it.
Also add a new set of leaf iterators, to get only
bdevs that have no virtual bdevs built on top of
them. These iterators are now used by the bdevio and
bdevperf utilities, in advance of the claim/unclaim
semantics getting removed in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I669783764407cdd4920b5ee121959e2a58c8d436
Reviewed-on: https://review.gerrithub.io/367610
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icdb017d7e6b0a38f8ff3aa78ea60117936dfe178
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/366702
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add adrfam to the NVMe bdev JSON config output.
Change-Id: I9472bda04947cffc0df9b02eba0035bac01b7d7b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Abstract these through the bdev API to break this
dependency on the event framework.
Change-Id: I108505bf27e94b2985f53d0a4dc0b847ae264d25
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366340
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This breaks one dependency of the bdev library on the
event framework.
Change-Id: I47ac81a3e4e951f94a66b5de2639eb485dc62e41
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366339
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This breaks the dependency on the event subsystem logic.
Change-Id: Ic47a219bc1e272c3421b265f74bba959e1aa5f62
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Anything that is not a PCIe TransportID is a remote NVMe over Fabrics
address and must have a subsystem NQN.
Change-Id: I1d34ce09a2c4ad7d3ec14fd90b5afccc33eb2bbf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365917
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Preivously, we can only parse NVMe-oF target by
rpc. Also the handling for local NVMe device and
remote NVMe devices are not consistent. With this
patch, we can handle it in the consistent way.
Change-Id: Id5c25f8b38a38ac997887b78c2321f148b8844ec
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/364348
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Much like bdev modules inside the bdev directory,
add a subsystems directory inside of event. The subsystem
specific code for the bdev library is placed in to
a separate library in that directory, breaking the
strict dependency of the bdev library on the event subsystem
code.
Change-Id: I255941b823a9ec3e2d62f22a586414949d8ff5ad
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This also requires vbdev modules to call spdk_bdev_reset
explicitly on the base bdev, rather than just resubmitting
the original reset bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie33d506f68506096306c9f0a9ff5e11141578b15
Reviewed-on: https://review.gerrithub.io/365712
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We can do all of the completion work first, and then
make the decision at the very end on whether to
defer the callback or not.
This also removes the bdev_io defer_callback member -
we no longer need it since we now only defer the
callback itself, instead of deferring the full
execution of the spdk_bdev_io_complete() routine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3285e34d2fbce34d4254dca2119561ff825ee9e8
Reviewed-on: https://review.gerrithub.io/365711
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia45876fb6f0eefd987cdb36521ecb591ef1f9499
Reviewed-on: https://review.gerrithub.io/365669
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures a reset is completed after any I/O completions
that may have been deferred.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efe5c07435371ff8c8e0c826349e9349ade02f3
Reviewed-on: https://review.gerrithub.io/365663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the user specifies the name of a bdev that is not an error injection
bdev, bdev_inject_error would cause a NULL pointer dereference.
Change-Id: Ibcc7daee5a75ac37c3567ebc048662e0165c2860
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365526
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This ensures all I/O will be aborted and that no I/O
will be submitted while the reset is ocurring.
Change-Id: I0f5c993b91d9be6073c6ddf66ae12010f56f864c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364682
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id0b79002744006fd5bce14b3a7fc1371bf91dcba
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365107
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Switch from the SPDK event library event to the spdk/io_channel.h thread
message abstraction. This partially decouples the bdev layer from the
SPDK event library.
Change-Id: I2300b8d84c357d6d8cab0d370d7681e948fe97d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These commands should be treated as aborted by spec,
so correctly deliver abort notifications when a
qpair is deleted.
Change-Id: I8af47a3f42f5695ef8e1a70813662e69102720b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are several possible usages of this information -
the first will be related to starting a poller for a bdev
channel when there are I/O that need to be retried.
Usually we can retry an I/O when a previous I/O completes,
but if there are no outstanding I/O, we need to start a
poller. This count will help us make that decision.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifff7d99970510785a1cf30d20b86b3974ce8a106
Reviewed-on: https://review.gerrithub.io/362235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The VTune ittnotify_static.c code, as currently shipped, triggers
sign-comparison warnings when built with SPDK's CFLAGS.
Wrap the file in a pragma to disable the warnings for just this file and
allow a build with --enable-werror to pass.
Change-Id: I701fb6b88f09564fdadfd17e1d16d80df455940b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364511
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ica7f76a5354b27e6e5fd7114de1fdba46434b073
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/362994
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I4d281be99553629563026cc4f9ab890d0a97986c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Dynamically allocate bdev names to remove the arbitrary 16-character
name length limit.
All of the existing product_names are constant strings, so those can
just use string literals instead of a copy per bdev.
Change-Id: I3280da67a4fcf2e4ec8ee8193362ca1b96a9c0cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363601
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Need to free this variable.
Change-Id: I78a7d5b312db6487ed65b9d314590a28408da761
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/363477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support passthru for NVMe admin commands.
Change-Id: If926f2ecabb078a553158f544c10a92452dbdb39
Signed-off-by: Edward Yang <eyang@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/363294
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I05bb8294471bac3f9ecc4744e28d7d40e57e5364
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362622
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The stricter warning levels (-Wimplicit-fallthrough=4) require all-caps
FALLTHROUGH, so update the existing comments to match.
Change-Id: I5f8608101cad31d8ea8e84d48604397f98400e87
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363491
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Instead of an array of queues per core, allocate
the queues per management channel.
Change-Id: I4ace5bd13362a549a45aba62e978dabbbe1a333d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362617
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reset requests will now pass messages to all channels,
correctly abort all queued I/O, wait for that to complete,
and then pass the reset request down to the next lower
layer in the stack.
Change-Id: I167cc5f424d3d0fc52b041bda63ee176f6acea29
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is now just one type of reset, which is equivalent
to a HARD reset previously.
Change-Id: I955b219cbc5c25793d97de1cc003b30ae99313ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I93684a004e2ae276734edbb4767b5ba1bac3dd48
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362111
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The next patch will make bdev modules init
in the async manner.
Change-Id: I4909c80510d786daf54003b99a5925428cf37373
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362110
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows virtual blockdevs to inspect newly-added bdevs and
potentially insert themselves automatically.
Change-Id: If567a950d753e5f08861a5de22a2e1350376e50f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I03d042cbb6de08f7e07b8c0ccc8af44d7b16ae3b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362614
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently this is just a placeholder, but eventually
it will be used to replace the per-core queues.
Change-Id: Iefeb90711bcf001a383e36cd4eaadf813af66506
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362613
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used anywhere and we currently believe there
are superior software-only techniques for controlling
quality of service.
Change-Id: Icdadd5870ed0629b338c307d2619bbc242c3e7a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If error injection is enabled and we choose an I/O to
fail, do not submit the I/O and fail it when completed -
just fail it immediately.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib58513f66e0df22c36137c0adb273fc31066c983
Reviewed-on: https://review.gerrithub.io/362386
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only DPDK primary processes can initiate device probe.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9f966a65fc98ad92b48814dbd6f36f78905162f
Reviewed-on: https://review.gerrithub.io/362452
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This ensures that all spdk_bdev_io structures now have
an attached channel, simplifying some future work around
things like counting the number of outstanding IOs for
a given channel (which otherwise would have had to
account specially for resets).
Reset semantics are still that they affect the entire bdev
and not just the channel it was submitted on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8aad21a88faacecfd94bdba350059528eb62c390
Reviewed-on: https://review.gerrithub.io/362251
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This prepares for translating -ENOMEM from the NVMe
driver into an associated bdev status code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0250d5d48e2131da31b71cf9695d12fee67b0fbb
Reviewed-on: https://review.gerrithub.io/362234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The user should not see the bdev_io status directly; the NVMe and SCSI
error code wrappers provide the ability to translate to the desired
format regardless of what kind of error is stored inside the bdev_io.
Replace the spdk_bdev_io_completion_cb status parameter with a bool
simply indiciating whether the I/O completed successfully.
Change-Id: Iad18c2dac4374112c41b7a656154ed3ae1a68569
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362047
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is no longer used anywhere. For the places where we previously
used it, we've since found alternate solutions that do not
require it.
Change-Id: I738a80b95ef50348ce1c14969a3812b0a625b3fd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362064
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also change the discovery/nvmf.sh test to use it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56bce9a84bd46f13b6d4f34da81abf23413f2598
This was implemented as two functions, but it
is much simpler as one. Also, the public function
was way at the bottom of the file instead of near
spdk_bdev_put_io_buf.
Change-Id: I3a90688910b0542cc77b6333bab15132cf514eeb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was implemented as 3 separate functions but
it is simpler as 1.
Also, this wasn't previously freeing the buffer pools.
Change-Id: Ic1b2b3a0596e745a223099cb2a79bea6ef5c69cc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was broken into three functions, but it is
a lot simpler as one.
Change-Id: If58ad50fe7d4f65c598b62f24e9e1ce7a64fdd8e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is better organizationally, but also will serve as
an io_device in the future.
Change-Id: I6d65cf39df59e874d13f5fccc5a489720e86c48f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Return types should be on a separate line for definitions.
Change-Id: Iaa38dd00042359fc6640fc67053bd69ebbb7af03
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the buffer allocation work for all types of
commands, not just read.
Change-Id: I72d8f67a724566630e7c4a74759fcb08449f7de4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Blockdevs already indicate support for unmap via
spdk_bdev_io_type_supported(bdev, SPDK_BDEV_IO_TYPE_UNMAP).
Change-Id: I634f27a281fd900bb3a6da2e4ff8a74e43579578
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We plan to use these buffers for more than just reads.
Change-Id: I8fa6cb432a6cfe4406fbf240cd3aa2ae4ab5f3d5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can get there via the bdev, so this didn't
have a purpose.
Change-Id: I7f85bb71d5ee238d37ba3624d0ac68a161c95e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The SCSI task bdev I/O should never be pending when spdk_scsi_task_put()
is called, and just setting the status to failed is not correct (when
the bdev eventually completes the I/O, it will write into the now-freed
bdev_io, which may be reused by someone else).
Change-Id: Iaad6ce9ab41539652abc40147fed47c5012109dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the pattern set by spdk_bdev_io_complete_nvme_status(), allow
blockdev modules to complete a bdev_io with a SCSI status code.
Also move it to the internal bdev header file, since only bdev modules
should be setting bdev_io status codes.
Change-Id: I8b6afad2c02d7c010c5e60f06a7c7e0785eb87ca
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the scsi_nvme translation code from the SCSI library into bdev, and
provide a generic way to translate any bdev_io status into a SCSI
status.
Change-Id: Ib61a6209387c24543e31574e2b5ca249e2ac8b74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These channels can handle generic bdev context.
Change-Id: I61f41884ddf4cf86fa156e9051421b354bbb349d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Avoid allocating a large amount of stack space when increasing
NVME_MAX_CONTROLLERS.
Change-Id: I7017e5ed9f4d4f5c860dac608c3e5ae3c35864e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove the "Nvme" from several field names. The parser
will still accept the old name for backward compatibility.
Change-Id: I6fa86ec359b23fb63960d0aa479a845b36a0977a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can now not only specify an optional timeout for
commands, but also the action to take when a timeout is
detected.
Change-Id: I7d7cdd846d580e0b3a5f733d398ee9b19d6fe034
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead, they register some internal structure of
their choosing.
Change-Id: Id1f8c563d0a2c6f1066d741f86b8aa6fe09b6319
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Some calls were passing bdev->ctxt, some calls just
bdev. In most of our implementations those are the
same pointer, but they aren't necessarily.
Change-Id: If2d19f9eef059aded10a917ffb270c1dc4a8dc41
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Also add a message when a controller is attached and assigned a name.
Change-Id: I54f2d711d55ba7ae99913fdfea652770b1f8931d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the name will not exceed the length of SPDK_BDEV_MAX_NAME_LENGTH.
Change-Id: I33a3f10c836e650fdcb578c7d9e58169d9bb766a
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
this patch fix the potential possibility of coredump when
we have NVMe device hot inserted.
Change-Id: Idac255f25f42b4746c2d3ae6dfc57a19b7001160
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
It was causing segfaults and infinite looping.
Change-Id: I4c19b5d3af1ba1360250cd5f6aa573a27003409f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The user now must choose the name for each AIO bdev. This
provides consistency for names across restarts.
Change-Id: I13ced1d02bb28c51d314512d60f739499b0c7d8d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Names for the NVMe bdevs are now assigned by the user.
This means the same name will always be assigned to the
same device, even across restarts.
Change-Id: If9825ec9abcb5236b4671bc44a825e4f0d704fe3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
All devices must be specified by BDF. Add support for scripts
to use lspci to grab the available NVMe device BDFs for the
current machine.
Change-Id: I4a53b335e3d516629f050ae1b2ab7aff8dd7f568
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
SPDK_COUNTOF works like sizeof, except it returns the number of elements
in an array instead of the number of bytes.
Change-Id: I38ff4dd3485ed9b630cc5660ff84851d0031911f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can be used for issuing an abort for the timed-out command.
Change-Id: I3c5727fdddc156cd7c8f99afbc3e6da8e73bba56
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No need to build a whitelist and scan anymore - the NVMe
driver can directly attach to a specified device.
Change-Id: Ie60c09b6ab37a7f068c496f0cad53bfdc8617349
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is consistent with the rest of the RPC calls that report a number
of blocks, and it matches the field in the split_disk structure.
Change-Id: Ie25534617112d65979c317fe13e05a6c32520a15
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The driver_specific object should contain a single object with the
blockdev driver's name so that the user can determine how to interpret
it. This matches the NVMe blockdev driver.
Change-Id: I434b910a95dd527363af78469dc900e9d19ec12e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that namespace splitting support has been removed from the NVMe bdev
in commit efccac8 ("bdev/nvme: remove NvmeLunsPerNs and LunSizeInMB"),
the block_size and total_size fields in the NVMe bdev's driver_specific
config data are redundant. The generic get_bdevs num_blocks and
block_size fields provide the same information.
Change-Id: I080d2017d608716a593bb553ee667e9c4017ffb7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move cb_arg to the first argument to match the other NVMe callback
function signatures.
Change-Id: I4e699c8071dcb7ba4ce3cdb82ee985600208204c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since the io_channel will be passed to the underlying bdev's
read/write/... functions later, we need to also acquire an io_channel
for the underlying bdev, not for the virtual bdev.
Change-Id: Ica13076973fef875ea636770fce8eb27017aa1c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This virtual block device takes an underlying block device and splits it
into several smaller equal-sized block devices.
Change-Id: I6f6e686c1177b2e4885f7e88809ad329caae55bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were only intended for testing and should be replaced by a virtual
blockdev that can be layered on top of any kind of bdev.
Change-Id: I3ba2cc94630a6c6748d96e3401fee05aaabe20e0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is necessary to process asynchronous events, as well as keep-alive
support for NVMe over Fabrics connections.
Based on a patch by Edward Yang <eyang@us.fujitsu.com>
Change-Id: I3e81f3d5061f75b12b625fa1a06629c6dc3dc61b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
