The last line doesn't need the line break, otherwise
it will wrongly include the next line.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I06257b18d25c060b7c6bb00853fa44963fe5b439
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14241
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
add --zerocopy_threshold option to allow data sent with or without
MSG_ZEROCOPY flag according to data size in perf test. This option
can be set when specifying --zerocopy-threshold-sock-impl impl.
Change-Id: Ic187aadba38287bc8f2f082319e26881a13a6766
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12814
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Better not to cache a value especially for there's an error return.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3b243a66f4db9af34bc2ea01bafdac33004be128
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Sadly, before v1.9.0, ninja used per-second granularity timestamps.
This had the unfortunate consequence that a "meson configure"
immediately following a "meson setup" would not be picked up by ninja,
thinking that no regeneration of the build config was needed during
"meson compile". See https://github.com/mesonbuild/meson/issues/3992 for
background and general dismay.
This means that VFIO_USER_CFG_OPTS are ignored 50% of the time,
depending on the wall clock. Unlucky builds would therefore end up with
libvfio-user being built as a shared object (rather than a static
archive) and for installation in /usr/local/lib64 (rather than
/usr/local/lib, as per VFIO_USER_LIB_PREFIX).
This is worked around by injecting a sleep between "meson setup" and
"meson configure" when ninja < 1.9 is in use.
Note that ninja v1.8.2 ships in el8, so suffers from this problem.
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Change-Id: I4d555dcc5bc63df4475ec6fd6014e3502123e92b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14236
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5aa53d0d06564030a3dbae8a8aa5c6179e972980
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibb713d5a597c83730cc81f8ab2d7a16334407ff8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
In this particular case, error() is called before it's declared,
hence bash complains that it's missing, failing to print out the
actual error message.
To not shuffle code around, simply replace this call with an echo
to stderr.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I6f0a6e5b0dfd6893aee6a66e6efdb9874245fafb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
bdev_nvme_create_bdev_channel_cb() did not initialized the multipath
policy of the newly created channel. 0 was active-passive and hence
multipath policy was always initialized to active-passive.
Fix the bug and add unit tests for verification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6e44108740da4b9ff72311ae4b5500558c65c5c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Admin passthrough supported retry and failover as same as I/O by
using the bdev_retry_count. However, doing retry or failover for
admin passthrough may have unexpected side effects and its value
is not clear. The safest way is to limit retry and failover for I/O.
If we need to support retry and failover for admin passthrough,
restore the code and add a new option bdev_admin_retry_count.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I680513a40a80041f6ea6f546c74c672f2a81812d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14227
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Abort is used usually for error cases. When abort is done, controller
may not be available. At completion, controller availability was checked
prior to aborted by request. Hence if abort is done when controller is
not available, the aborted request is retried.
Fix the case in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3e7b356797dd50faed0e5113f6f7a47fea26d9cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14098
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was correct back when we only supported PCIe, but doesn't
in the newfangled world of fabrics and vfio-user.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I565edd2dab1eff862844585df8c25da508e4816d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Adds a debug function, that scans the whole P2L of band, when
it's getting closed. The P2L is compared against both L2P and
valid map to check for any discrepancies.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia4d7be65415e6af3752d676de69b6fdcb73effb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Utilize the valid map when picking physical blocks to compact/relocate,
speeding up the process.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I860e3cf25a5907591e4f3043def67156fec8b0df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13351
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds P2L validity map tracking - a bitmap marking all physical LBAs
as containing valid (current) user data or not. A clear bit denotes
the location has no valid data and may be skipped during relocation
or compaction. A set bit means it may have valid data (it's still
necessary to do the necessary comparision against L2P).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I6a831a97b3080eb7c880d9c4feab41b523467885
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding API for the bringup part of fast shutdown/startup. Adds
shared memory utilization for necessary functions during initialization.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Iab2da102fd0ccaa56fbdb9b3c765be5eeefff145
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13349
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds API for fast shutdown - the ability for FTL to skip most
of the metadata persists made during clean shutdown, and relying
on their representation in shared memory instead. This allows for
faster update of SPDK (or just FTL, assuming no metadata changes),
with downtime reduction from 2-5 seconds to 500-1000 ms (for
14TiB+800GiB base and cache drives).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5999d31698a81512db8d5893eabee7b505c80d06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Helper functions which determine which md regions will be stored
in shm.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I94cbfca66dfb56457a350874dbd1de63a2e07661
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Stores P2L map of open bands in shared memory, allowing for
faster recovery times from application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I519441af05e4d0f57768835bf01c800556873c58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allows for using shared memory in memory pools. Adds API for
accessing such pools after dirty shutdown (claiming them, ie.
marking an entry as actively used; calling the
ftl_mempool_initialize_ext will reclaim all unused entries back
to the pool). Also introduces API for accessing objects, since
using direct pointers is not possible (as addresses may change
inbetween application startups).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5325b39d68aef7e231945cee9d92c925cab2fb2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13346
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Main use case is to allow for keeping it in shared memory, to
speed up the recovery time after application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I36b6b8331cd6483c5bd202e5f9103c351d705da8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Relocation will
1. Read LBA map of a given band
2. Pin the LBAs
3. Issue writes of valid LBAsto the new location
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ie753a790e56a86bfa1e451b5eda78b88eeacd3cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13344
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the value after negotiation with the host.
Change-Id: Ifec843c7c2ff7d88ee3ccf26b942fcd084efda55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Enables the use of uring bdev with ZNS devices.
Uses BLKXXXZONE ioctls for implementing the zone operations.
Signed-off-by: Indraneel M <Indraneel.Mukherjee@wdc.com>
Change-Id: I440e316138182e25d89eb7224932e19bef9a005f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13550
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We've had a few more issues with the AEN tests since
they were recently enabled (#2660, #2662, #2664, #2674).
It looks like #2674 is the only one still open, but
it's causing a lot of failures in the test pool so
let's disable the tests again while it gets root
caused.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib57240e176a05f9b99856ceb6d0bf8afcb24ff95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14245
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Do not print messages in case rake or bundler
are not found.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I92145a409af0ae95bc9ae194c7830feabd3a4641
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14155
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Updated the existing nvme aer test to only print information
about AEN one time per controller. If the SSD is slow to
reset the temperature setting, it could continually generate
AENs and spam the output logs.
Fixes: #2660.
Fixes: #2662.
Fixes: #2664.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ibbaa9c54bd5f27a018d85ad53390933628975883
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Multiprocess is only supported by a few libraries (e.g. NVMe driver).
Other libraries that don't support it will often fail on mempool
initialization when running as a secondary process, as the mempools are
already created by the primary process. But the error messages are
vague and don't indicate why this happened. So, this patch adds a check
to see if a mempool exists after spdk_mempool_create() fails and prints
an error message informing users that multiprocess is unsupported.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6f915a94266e64dda380e3b269424cc579372a10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14234
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
When we specify source address for admin and I/O qpairs,
rdma_resolve_addr() succeeded only for admin qpair and failed for
following all I/O qpairs because rdma_resolve_addr() returned
-EADDRINUSE.
To reuse source address among multiple qpairs, set the REUSEADDR option
for each CM ID before executing rdma_resolve_addr() if source address
is specified.
We may miss something. Even if rdma_set_option() fails, execute
rdma_resolve_addr().
Fixes issue #2604
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If03f82d4499cf83c0e428a62e91c9d9e6aad28e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14229
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Memory leak for xnvme_dev_alloc is really a bug.
This has been fixed in its parent patch.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I9f131c0f8e3c8b8234965d9edf5afaf018ab3cfa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Here no need to define a variable only return.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I6babb8ef94a9b111d5522f1e782cbd095c7da83a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
We can see this app using dd_exit to cleanup.
Some error cases:
spdk_bdev_get_io_channel failed for -ENOMEM,
or it results in dd_open_bdev failed and then
dd_exit.
For a bdev, dd_exit does cleanup using spdk_put_io_channel.
And spdk_put_io_channel allows `ch == NULL`.
This causes SEGV.
So here add a separate function to check ch, and put
cleanup together.
This is found by xnvme pre-test.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I9dd860da250a86f52139e69c690dd257a7ff7717
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14195
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
If we use dd or bdevperf to run the xnvme bdev.
the destruct function of xnvme misses to free
dev while destructing bdev_xnvme.
xnvme_dev_close does free dev, and we can put it
in bdev_xnvme_free.
Meanwhile fixing cleanup for delete_xnvme_bdev.
This rpc for delete_xnvme_bdev doesn't really cleanup
to remove the bdev from the list and free the names.
Fixes issue: #2654
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I1c493cb8130b012d891ba8ee90cd0bfb127207d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14177
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test is meant to simply verify basic IO and rpc integrity with
regards to different io_mechanisms.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I936d57c6ac539e77761656a1ec2b8ad1013f918f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Found while debugging issue #2596, unfortunately this
is not the root cause of that issue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I27501e283ce7c9bf7a431e8b48842c83f80792c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14165
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Add indication of support for compare, compare & write and abort
in json bdev info dump.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ifc8dc1a1b180f08fcd9e9d58684eab1fd50356ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14137
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After running into multiple issues with missing packages when building
bpftrace, I went to the bpftrace repo and used the install documentation
to successfully build and install bpftrace. This patch updates the
spdk documentation to point to the documentation in the bpftrace repo.
Change-Id: Iab5ef901d282a26d6a3c4f59cceb46b317ee658a
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The new commits eliminate `1.45%nvmf_tgt[.] vfu_log`
CPU profile when building in release mode.
Change-Id: I6347949a31f61ecfc619435ac3743f8d9dab3603
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's observed that `spdk_mem_register` may take some time
to register VM's memory regions, and QEMU will wait the
socket message within 1 second, so here, we increase the
value to 5 seconds which could cover all test cases in CI.
Fix issue #2392, #2600.
Change-Id: Ia95cc9c94d27076a25dc107cff32fae9a3608b1e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit a119799b ("test/nvme/aer: remove duplicated changed NS list log")
changed the nvme driver to read the CHANGED_NS_LIST log page before
calling the application's AER callback (previously it would read it
after).
Commit b801af090 ("nvme: add disable_read_changed_ns_list_log_page")
added a new ctrlr_opts member to allow the application to tell the
driver to not read this log page, and will read the log page itself
instead to clear the AEN. But we cannot add this option to the 22.01
LTS branch since it breaks the ABI. So adding this API here, which
can then be backported manually to the 22.01 branch for LTS users
that require it.
Restoring the old behavior is not correct for applications that
want to consume the CHANGED_NS_LIST log page contents itself to
know which namespaces have changed. Even if the driver reads the
log page after the application, that read could happen during a
small window between when a namespace change event has occurred and
the AEN has been sent to the host. The only safe way for the
application to consume ChANGED_NS_LIST log page contents itself
is to make sure the driver never issues such a log page request
itself.
Fixes issue #2647.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaeffe23dc7817c0c94441a36ed4d6f64a1f15a4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14134
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The display_thread() function is the only one that needs to use a copy
of thread data, as threads might be moved between the cores during
SPDK application lifetime.
To avoid problems with using freed memory in the copied thread
structures, make sure the data is always present, by allocating a copy
of necessary strings. This will ensure that even after we have already
freed the globals holding data from RPC, the pointers used to display
the names and cpumasks will still have something to point to.
Fixes#2635
Change-Id: If9228ee199a774d208ddd6ff846532be3ef2012d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Source authentication file before calling each
tempest test. This fixes problems with
"Connection refused" caused by openstack.keystone
authentication.
Change-Id: I7d4184ec9d52f23d354103a1f45ecfac71bc9b97
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13553
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
