Move memtable register out of start_device, into
post_handler for vhost-msg SET_MEMTABLE;
And unregister memtable in destroy_connection
instead of destroy_device
If memtable info not changed in the msg, then we
don't need to register it multi times.
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Change-Id: I0f8c76c1ee43b6f981d703beeba92da5dac4dbd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14263
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Fix mkfs fail when using lvol as backend of nbd.Predefined
NBD_FLAG_SEND_FLUSH and NBD_FLAG_SEND_TRIM are defined by default,
so the operations of trim and flush are supported,but in fact lvol
doesn't support trim and flush operations.Therefore add judgement for
NBD_FLAG_SEND_FLUSH and NBD_FLAG_SEND_TRIM to check.
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: I3d21034d12a038c8fc694d3383028103239ea6bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
state change function do not need to use swtich to do some work.
Do memset in state machine.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie66454d8f31860f403171f20858a6b4a24e3c76f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14502
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Some methods are allowed to be run in both
STARTUP and RUNTIME states and current implementation
calls such methods twice. That can be a problem
in some cases, so use the new spdk_rpc_get_method_state_mask
function to skip such methods in RUNTIME state.
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I0a109805db428f60072a8c82161805dcde763da7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14407
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new API will be used in the next patch
to prevent calling metods for the seconds time
when subsystem is initialized with config file
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I60ac8196e46ccb3b22b3af0607e1ba35a11a66a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14406
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These functions start from a given offset and seek for next
data or for next hole. For bdevs that do not support seeking,
it is assumed that only data and no holes are present
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I6bc831970223333b25683f60ce3fcbbfebb5bb81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
These functions start from a given offset and seek for first
io_unit belonging to an allocated cluster or first io_unit
belonging to an unallocated cluster
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I0c632e2b3dfd2e96aa22e21796e25a36f2f55f9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This function returns the number of io_units per cluster
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I8f33d24a63876a0a918830b9eeaa69a91ff21193
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
before this change, we cannot pass a `const struct option*` to
spdk_app_parse_args() even the callee does not mutate the value pointed
by the pointer. in other words, we are not able to write something like:
static const option g_options[] = {...};
// ...
spdk_app_parse_args(argc, argv, &opts, "",
g_options, app_parse_arg, app_usage);
after this change, the requirement of the type of the `option` argument
is relaxed, so we can pass a `const struct option*` to this function
now.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Change-Id: I8794fcf92090f538743850a28ef4a2a8c357f121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
While waiting for a new PDU, target will not do too many useless
memcpy.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie0825c2b1e44444b210040c4a1761010e0e4cfe5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Since only L2P pages as a whole are marked as invalid during trim, the
specific L2P entries won't be updated until someone touches that page.
The unmap process will slowly invalidate pages during runtime, by paging
them in. This will allow compaction and relocation to benefit from the
trim as the user data gets invalidated.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I239b9adf0aaaeac58f440145f4ab78b0d78d98b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Trim is now also available as a management operation via RPC.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I05b778a611e9809a14bfed50b01986bb4649a35c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds ability to send trim commands to FTL - only 4MiB aligned requests (both
for offset and length of request) will be processed. During a trim
operation an L2P page (containing 1024 4B entries, 1 per user LBA; which
is where the 4MiB alignment comes from) will be marked as unmapped.
After this point any L2P access to that page will actually set the
entries themselves as FTL_ADDR_INVALID. This is done to make the trim as
fast as possible, since for large requests it's probable that most of
the L2P pages aren't actually in DRAM.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4a04ee9498a2a6939af31b06f2e45d2b7cccbf19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the end of the recovery step, all chunks will be transferred to closed state.
Missing write pointer data filled with LBA_INVALID
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Id496e465e46fa24b04b30f2558bdacfdd668e8a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Recovers the free/open/close chunk state, initializing them to any
specific lists.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Idf689f4fbcd6fc6bd986104dc89f5079c758845a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For all the vhost-user messages processed in SPDK except
VHOST_USER_GET_VRING_BASE, DPDK rte_vhost "vhost-events"
thread already holds all VQ's access lock, before return
response to "vhost-events" thread, SPDK should not call
`rte_vhost_vring_call`, here we set a flag to TRUE for
these vhost-user messages, and avoid to kick VM. The
deferred IRQs will be posted in next round poll or
after restarting the device.
Fix issue #2518.
Change-Id: I82f14b97d0b0ce602a93fd66d5fdeef64f07d179
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we will call `rte_vhost_vring_call` in the DPDK
"vhost-events" thread context when starting the device, and
DPDK vhost library already holds all VQ's access lock when
starting device, with new DPDK/dpdk@c573699 commit, it will
cause deadlock to call `rte_vhost_vring_call` in "vhost-events"
context, so here we increase 1 to `used_req_cnt` to make sure
one more `rte_vhost_vring_call` will be executed later in SPDK
thread context.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Iab53941942335744bf25ab6e9b8747bd08b0c698
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14328
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
`rte_vhost_vring_call` may return error, then we can
try to call it in next poll.
Change-Id: I8f6a591837225079e004c6f57f2d7b01063f87a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14342
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
We do not support dynamic memory allocation with the virtio-user
library - it results in SET_MEM_TABLE vhost messages for every
change which is not supported by the vhost target.
Add '-s 256' to vhost fuzz script, to ensure it does not
violate the new restriction.
This is a follow-on patch for issue #2596.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If851f53d7d670ac8443f0d9c8f4e3cbe82e0df7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14249
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Before this change, a negative `--shm-id` value is rejected by
`spdk_app_parse_args()` and this function simply errors out after
detecting it. However, `build_eal_cmdline()` has a dedicated branch
checking for a negative `opts->shm_id` and passes `--no-shconf` down
to DPDK as a parameter, so we cannot disable the shared config support
in DPDK.
After this change, a negative value `--shm-id` is accepted, but if it
cannot be parsed as an integer, `spdk_app_parse_args()` errors
out as before. In result we can disable shared config support in DPDK
by passing `--shm-id=-1` to SPDK application.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Change-Id: Ibe089f13638eefa9ac28c5c99e303bcc3102f307
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The generic bdev layer has a public API spdk_bdev_get_qd() but its
value is the most recently measured value and it requires qd sampling
to be enabled. We will have bdev modules to want to wait until
all bdev_ios are aborted by a reset. Unfortunately, spdk_bdev_get_qd()
is not suitable for the custom bdev module. Furthermore,
spdk_bdev_channel::io_outstanding is not accessible from bdev modules.
Hence, add a new public API spdk_bdev_get_current_qd().
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ica30a8d8fe3264e28f0772a39bdf5f9ba72933e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12791
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some use cases want to abort every bdev_io submitted to the bdev by
traversing the bdev channels.
However, struct spdk_bdev_channel is private in lib/bdev/bdev.c.
Hence, add a helper function spdk_bdev_for_each_bdev_io() to execute
the function on the appropriate thread for every bdev_io submitted
to the bdev.
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
We keep this function as generic as possible because we may have
other use cases in future.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0209361bd1228ea8d4cb3241d0df07106be58d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12751
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Former code, there're many repeated defines. And some add
asserts checking valid event and some don't add. To get the right
reports from debugging mode and catch the errors, so encapsulate
a common function to do these. And add assert in this function.
This will help get the right failure point.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I23d71eac6652c4104ceff80419f39634ac5ce395
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14335
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We already define a convenient variable for the admin CQ: use it.
Suggested-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6570f30844a52113633bdb5f3543eec700f05d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14391
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order to fit inside the maximum memory usage limit, recovery needs
to be split into multiple parts. During each iteration, part of L2P needs
to be read, modified as necessary and saved back to the cache.
This patch introduces the load/save steps, initialization of seq_id array
and valid map recovery. The actual L2P recovery is done in the followup patch.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I8ceadc5ef280542a173d83b932a983d5d86604a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13371
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds recovery of open bands from P2L metadata region. Recovers the
commited P2Ls and write pointers for them.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I943c53f55e653dd075035cef7ddba448c990be87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recovers the open/close/free state of bands after shutdown, initializing
necessary lists.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4a6bd4ed1013ce8d04f44d1772dcd1f0e4e365bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since base device doesn't require VSS, FTL introduces a mechanism that
will allow for recovering both the P2L and write pointer of open bands
after a dirty shutdown. After writing 1MiB of data to a band, a 4KiB
block describing the P2L will be persisted to cache device, effectively
emulating VSS for the base device.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ic6be52dc09b237297a5cda3e752d6c038e98b70e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13367
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Track the relative sequence of opening and closing bands and chunks.
Necessary for detecting the most recent user data during dirty shutdown recovery.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I682030e58284d7b090667e4e5a9f4bbc7615708a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
hexlify and unhexlify utils from vbdev_crypto.h have been moved so that
they could be included and reused outside of vbdev_crypto module.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: Ia074250176907f4803b84024239ecd4e9d8a5fc1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The word engine was both used (interchangeably with module) to refer to
the things that plug into the framework and to the framework itself.
This patch eliminates all use of the word engine that meant the
framework. It leaves uses of the word that meant "module".
Change-Id: I6b9b50e2f045ac39f2a74d0152ee8d6269be4bd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
spdk_accel_module_finish
Also move it into the internal header that defines the interface used by
modules.
Change-Id: I3aeb41e643f27a69556099cb8d166f64c9e5d67f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
For non-fabric controllers, the corresponding I/O qpairs are simply
re-enabled at controller reset.
This had a issue when I/O qpairs span multiple threads and poll group
is used.
spdk_nvme_ctrlr_reconnect_poll_async() calls
nvme_transport_ctrlr_connect_qpair() with qpair->async being false.
Then nvme_transport_ctrlr_connect_qpair() calls
spdk_nvme_poll_group_process_completions() until the qpair is connected.
spdk_nvme_poll_group_process_completions() may poll other qpairs.
This may cause I/O to complete on a wrong thread.
For PCIe controller, spdk_nvme_poll_group_process_completions() calls
spdk_nvme_qpair_process_completions() simply for each qpair.
Hence change nvme_transport_ctrlr_connect_qpair() to call
spdk_nvme_qpair_process_completions() if the controller is non-fabrics.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ieb270c2fb154124021ef6d25577b817d05e5ca9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14295
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Writing to unallocated cluster triggers copy-on-write sequence. If
this cluster is backed by zeroes device we can skip the copy part. For
a simple thin provisioned volume copy this shortcut is already
implemented because `blob->parent_id == SPDK_BLOBID_INVALID`. But this
will not work for thin provisioned volumes created from snapshot. In
this case we need to traverse the whole stack of underlying
`spdk_bs_dev` devices for specific cluster to check if it is zeroes
backed.
This patch adds `is_zeroes` operation to `spdk_bs_dev`. For zeroes
device it always returns 'true', for real bdev (`blob_bs_dev`) always
returns false, for another layer of `blob_bs_dev` does lba conversion
and forwards to backing device.
In blobstore's cluster copy flow we check if cluster is backed by
zeroes device and skip copy part if it is.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I640773ac78f8f466b96e96a34c3a6c3c91f87dab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There's no reason for this parameter to be non-const and it makes this
functions pain to use when you want to hardcode a specific sock
implementation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifed4426a02ab54cbd51c8a2051b1eac010f86db9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If initiator and target run on the same application, and initiator
uses SRQ, target may get async events for initiator, e.g.,
IBV_EVENT_QP_LAST_WQE_REACHED unexpectedly.
The reason is initiator and target may use the same device
simultaneously and only target polls async events.
Target sets attr.qp_context to rqpair when creating QP, but initiator
sets attr.qp_context to NULL when creating QP.
Hence one simple fix is to ignore async events whose qp_context is
NULL.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id9ead1934f0b2ad1e18b174d2df2f1bf9853f7e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14297
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
By the previous patches, a qpair is destroyed after it is actually
disconnected.
But after the qpair is destroyed, it is checked if drained by using
rqpair->current_num_sends and rqpair->current_num_recvs.
However, if the qpair is the last of a poller of a poll group,
CQ is destroyed before checking if the qpair is drained.
If CQ is destroyed, at least rqpair->current_num_recvs is not updated,
and we may get one second timeout.
This should be avoided.
Hence, destroy the qpair after it is disconnected and drained.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ibd6c83e8a3e7b6e11e9b45cee42669da6d42a621
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14278
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
