Also print error message when a duplicate is detected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibcc667700a5b410e3a300507e76b99d04b09cfc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Print these out for the RDMA transport.
Change-Id: I44ab01088fcab180540a93e024855322036241db
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452272
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are cases where srq can be a detriment. Add a flag to allow users
to disable srq even if they have a piece of hardware that supports it.
Change-Id: Ia3be8e8c8e8463964e6ff1c02b07afbf4c3cc8f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452271
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order to truly support multi-sgl inline requests in the RDMA
transport, we would need to increase the size of the
spdk_nvme_rdma_req object dramatically. This is because we would need
enough ibv_sge objects in it to support up to the maximum number of SGEs
supported by the target (for SPDK that is up to 16). Instead of doing
that or creating a new pool of shared ibv_sge objects to support that
case, just send split multi-sgl requests through the regular sgl path.
Change-Id: I78313bd88f3ed1cea3b772d9476a00087f49a4dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function was only called from a single place, so just
move the code there.
Change-Id: I78c05ef41ca0d5684385e80cb75d699453c90792
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This went stale and the code is currently in flux.
Change-Id: Ib0b2171f253db0f54d41573c07668eb3b2bd83b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, this searched the list of cores for the one
with the fewest connections and scheduled there. iSCSI
is being migrated to a new threading model where the
threads themselves will float, so simplify this part
of the code while that's implemented.
Change-Id: I05a1ff51a45df9c176c0e57d7f1ae9e97928adcd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI is currently being adapted to SPDK's new threading model,
and this parameter doesn't make sense anymore. Remove it for
now until something functionally equivalent is added later.
Change-Id: Ia0e2f5aa81b72d99467c5a900619fbeeb42b2069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't need to have operations to remove just the socket.
Change-Id: I00e0c7fb81af98d1c072ba126ce22b41954e313b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For migrating a connection, don't stop it entirely.
Change-Id: I0e09698e03127c04257485a0a2af262ed1a7761a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Typically we just pass the bdevs supported IO types
for each of its partitions. But that doesn't work
for partitions with non-zero offsets since we can't
decode/modify the NVMe command in the bdev layer
to account for that offset. So just don't allow it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38a766fcc39d5f068b31245bf1a47dbb79c8f8dd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was bdev-specific code that has been made generic
but we missed removing this "split" name when moving
the code.
We don't need a name here really - SPDK_ERRLOG will
tell us the file and line number of the error which is
sufficient.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d19b947c48407bfd99058b78325108c2957b391
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Prepare vhost lib init to be asynchronous. We'll need
it for setting up the upcoming poll groups.
Change-Id: I3c66b3f17f8635d4b705dd988393431193938971
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put all shutdown functions in a single place. This also
lets us remove one forward declaration.
Change-Id: I8c8c602e67e3dafd3cd5e80bc9dd90f23381711e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Switch to the new spdk_thread_send_msg() API instead.
Change-Id: I810465cc49d5c4ef23e04953aa29d369f48f68b1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We're about to drop legacy event messages from SPDK libs
and for that we'll replace various lcore numbers with
spdk_thread objects. For now SPDK libs can't spawn their
own threads, so they must use spdk_for_each_thread() and
spdk_get_thread() to retrieve different thread pointers.
The vhost library offers API to construct a vhost device
to be polled on specified cores, and in order to keep that
functionality we'll need to know which core each thread
is polling on. We would like to achieve that with
spdk_thread_get_cpumask(), but right now it always returns
all cores, so this patch changes it to return just
a single cpu on which the thread is actually pinned. It's
only a stop gap, eventually the vhost library will spawn
its own threads with custom cpumasks.
Change-Id: I15947727123c51b23f63727d52079770bfb2e07b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Here g_num_poll_groups is not less than 1 now, so this assert is
redundant.
Change-Id: I4fc539480e2b63c8302af57b18d2164b5161b094
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The individual transports will adjust these sizes when
necessary. In fact, we have to remove this check, since
RDMA transport may adjust the io_unit_size based on the
max number of SGEs - and can adjust it to a value that
will fail this check if we reload the configuration.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2708c7f5aaa54a368ec932ec40dd6447f1a4fde0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452474
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
They were removed from the trace API and BlobFS doesn't
compile right now.
Change-Id: Ie98339f19353e4db901af551c706f57c18b89fc5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The product_name for raid bdevs was "Pooled Device" which was a legacy
naming convention that hadn't been cleaned up yet. This changes the
naming to be up to date with the current naming scheme.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I9092a2b793e48bb9ec0349087a31fdcde17ed9cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove SpdkFinalizeThread. It is no longer needed - the
thread-local destructor handles the cleanup.
Keep SpdkInitializeThread but make it static. We still
need this function for the main thread, so that it can
be explicitly called after the filesystem has been
loaded.
Part of this patch moves the rocksdb_commit_id to a
version that doesn't make calls to these functions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib9aefdfede7e5636085079d2226ec1c4d2cae406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This restriction helps reduce the amount of padding when
printing out the event trace, allowing it to fit in a
small number of columns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa31e5a6967c7b9bc7028069effb71533f80596f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
FTL doesn't have any kind of special package requirements.
It is getting pretty good traction in the community, so
let's enable it by default.
Note that we will disable FTL on FreeBSD. FTL uses
CIRCLEQ which is not available on FreeBSD. Let's not
spend time trying to get FTL to work on FreeBSD until
there's a demand to do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15525b6c4e6ee52f49adf74d55f9484fe08a6dcc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function is in charge of scheduling new connections
onto cores. It used to be used to dynamically migrate
connections, but we no longer do that.
Change-Id: I2fa04a7dfb43bf9fae7902376ba5ba6d18744469
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can use threads instead of events.
Change-Id: I8a55ad512038dd75218a9a6af17d135eba6949f7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During connect call based on queue type (AQ or IOQ), SQ size should be
validated against max sq size for that particular queue type.
Change-Id: I977d7556e4d04e37004d16c87efffd3b467fa62c
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use the rpoller->srq to check if a qpair is valid when processing
recv completions.
Change-Id: I6aa360adc48a3312ddcf79f10e2a65b502a7314f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We could return from spdk_for_each_thread() without
unlocking the global threading mutex, rendering the
entire SPDK application useless.
Change-Id: I641c7b36db996f9a36310332279648014579de83
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
They're only used in that single file.
Change-Id: I929d00156bdd0e81adaac0281560d7f6e13394f8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452425
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_dma_malloc() is not required here, as the buffer
is neither DMA-able nor shared between processes.
The buffer is used to store the scsi response as it's
prepared. At the end it's always memcopied to possibly
multiple DMA-able buffers in the scatter-gatter list
provided by the upper layer.
Change-Id: I92fcede67dc24c532b13399f6364b071b2aeeb56
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Send the given NVM I/O command, I/O buffers, lists and all to
the NVMe controller.
This is a low level interface for submitting I/O commands directly.
This can only be used on PCIe controllers and qpairs.
This function allows a caller to submit an I/O request that is
COMPLETELY pre-defined, right down to the "physical" memory buffers.
It is intended for testing hardware, specifying exact buffer location,
alignment, and offset. It also allows for specific choice of PRP
and SGLs.
The driver sets the CID. EVERYTHING else is assumed set by the caller.
Needless to say, this is potentially extremely dangerous for both the host
(accidental/malicionus storage usage/corruption), and the device.
Thus its intent is for very specific hardware testing and environment
reproduction.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I595fe02fe0dfa9c3ceba1ac116b6900357b02d2c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also remove an unnecessary empty line and fix typos
Change-Id: I54e63e39dda23063c3fcbdd709cafec4278b130a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Mempools are based off of a ring structure which allocates its elements
as a power of two. It also only exposes n-1 elements to the user. So
when we create a mempool with 2^n elements in it, we have to allocate a
ring with 2^n+1 entries. By decreasing the number of elements in these
key mempools by 1, we can save a decent amount of memory.
Change-Id: I942c9dd4cf59096969bc2559fb46fd2084a07f09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add callback for construct function.
It is not asynchronous yet, but will be after
adopting asynchronous OCF API
Also adopt RPC construct call for this change.
This is done in this patch because (1) change is small (2) leaving
implementation as TODO still requires implementing a mock because we
decided that callback should be required rather than optional.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ib6a78e2caf34ac057d4da53ad5dda47163e8a089
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add vbdev as another argument in callback of vbdev management operations.
This is nice for async version of vbdev_ocf_construct() which uses mngt_
interface and creates vbdev structure.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I8c88e0a881855b9f22fcf1f8174c888f3cfd6828
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452145
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For now, just do events for open, close and start/end
for writing the length xattr. These will be useful for
debugging the intermittent RocksDB failures.
Note these events may only be recorded on the polling
SPDK thread. SPDK events cannot be recorded on
non-SPDK threads (i.e. RocksDB user or background threads).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I72fb302db23b399f583f56194c237340587f3027
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This requires changing arg1_is_ptr to arg1_type.
We will use this to print the first 8 characters of
a blobfs filename when collecting event trace data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b321d99145e82b42dcf6d901ce9d6298158edae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452259
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When new writes come from different threads, cluster allocations can
happen many times at once. The corresponding cluster number for the map
is determined via _spdk_bs_allocate_cluster() and kept in ctx->new_cluster.
The cluster itself is inserted into the map only on md_thread.
When there is conflict of two threads allocating same cluster,
message is returned to the losting thread to release the cluster.
Before this patch, on such failure the cluster to release
was calcualted from the page. This resulted in releasing the
cluster claim for thread that actually won it.
This patch makes it so that cluster allocated and save in ctx
is used instead.
Change-Id: Id10811b887f673f9b89e41e0637d4422f1d7270d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3858c637d421b58e74fa5573d257e59fed92824a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch add new _spdk_bs_delete_blob_finish function
which will be helpful in future changes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2d492b6102f33ad35b7b6fe408f709f54b7b2341
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452251
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new function which is used to check
if blob can be removed when requested.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafa82fba9bf67ffd15cf639f4665087f054b6b7d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452242
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch creates new function that will be helpful
with further implementation of 'delete snapshot'
feature.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I66f138ba217fb4a4186f2703900a2952cdb8e438
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452240
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We decided to name compress bdevs with COMP_ and then the name of
the underlying bdev so the RPC parm name was stale. Previously
hardcoded the path to PM for early dev so replaced name with pm_path.
Note that a sample create looks like this now:
rpc.py construct_compress_bdev -b NVMe0n1 -p ~/pm_files -d compress_isal
And that devs need to pay attention for the pathname they provide, its
easy to leave orphaned pm files around and they can get big.
Change-Id: Ifb5245c922461bbecec4bef266bdeb25e8b87f31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Needs to be based on the compressed vol size which is smaller
than the backing io device.
Fixes issue 763
Change-Id: I917c98e86a0755e503d5ba3d4b6c02e42f9ed709
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It used to be that we would get async events very infrequently. However,
with the introduction of SRQ, this number has gone up tremendously.
Change the way we report our these events so that we don't spam/confuse
people running the target.
Change-Id: I33070281fa854cbc17784d61bbbb870196ca8780
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there are outstanding recvs for a qpair when it is destroyed, we need
to clear the qpair from it before reposting it. Otehrwise, we have a
potential heap-use-after-free of double free (depending on whether the
recv completion is in error state or not).
See github issues #730
Change-Id: Ic2009c761cbcc5e89174f62fbd0872d0489c67ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At some point this parameter may have been a bool, but it's
not now - so we need to explicitly pass SPDK_BLOB_READV or
SPDK_BLOB_WRITEV.
Otherwise we end up trying to write the iovec array as the
data buffer when executing this operation later - since we
passed "false" which is treated as 0 which is
SPDK_BLOB_WRITE (not SPDK_BLOB_WRITEV).
Fixes issue #603.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50df736216c4a88b40604722c021e204c7fac623
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452157
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At the RDMA level, we allow processing requests that should contain a
data transfer, but specify a length of zero to be passed up the stack
without a data buffer. See spdk_nvmf_rdma_request_get_xfer. In the case
of the reservation requests, we weren't checking whether req->data was
NULL before trying to copy into it causing us to segfault if we got a
malformed reservation request.
Found when using the fuzzer.
Change-Id: I320174ec72a8d298ab6ca44ef6a99691631f00ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Other threads are referring to this memory.
Change-Id: I9689a1b64a1f032ad479ec85095d2575dcab3a7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452130
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There's some more work needed to clean this up, but this
at least gets RocksDB working for now after the following
patch which enables dynamically specifying the RocksDB
commit ID.
Note that for now, we've modified the RocksDB BGThreadWrapper
to call SpdkInitializeThread() explicitly. We'll be able
to move that in the future, but for now we check whether the
channel has already been allocated so that this extra
SpdkInitializeThread() effectively becomes a nop.
Note that for the main thread, g_fs hasn't been set yet, so
we can't allocate the thread_ctx. So we still need an
explicit SpdkInitializeThread() call in the main thread.
This has the nice side effect of removing the need for SpdkEnv
to override Env::StartThread - so remove all of the code associate
with that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e8d12b74e688953e15d5d6df58b93e3f5b74c3d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452112
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reset the device to its factory defaults.
Change-Id: I43f7dc8fb7bd5226283a4762beac0e2cf016f698
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
_spdk_bs_blob_list_remove function returns only 0
so it can be changed to void function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1827d783a7cd18caf831275554e33f398b0b962f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are no guarantees of the order of completion
of NVMe IO submission queue so wait for write completion
on specific chunk before submitting another write to it.
To control chunk occupancy split IO to child requests
and release chunk in IO completion callback.
Change-Id: I44147a21b528a7f33fb92b9e77d7de8f5b18f8ff
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7a7667e1c4e6321150e5bc8eb4287fb61847ccb5
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Block operation that should not be done simultaneously.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3cab510377a49be4e5847ba37a6218f0025c0db6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450014
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently someone can create clone while blob is being
opened for deletion. This patch moves check for blob if
it is a snpashot after the blob is opened.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia4b8b7cb956522a29784aa349d677eb87886e4db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also make some modification for invoking process in
nvme_manage tool.
Change-Id: Ib54db43d7336d3e839e7d9317c292b9a57b38f80
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, if the Bdev subsystem initialization fails, the initialization failed
module does not call the fini function cleanup resource.
However, null module use the 'spdk_io_device_register' and spdk_zmalloc to request
resources. In failed path, it will cause resource leak when exiting the app.
To avoid this, it will cleanup resources when module initialization fails.
Change-Id: Ib1a89e5238252d69b6e64ea02a0bd826661349a5
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450105
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch won't fix issues related to the need for the latest
ipsec with 19.02 but it is needed for that patch to pass.
Change-Id: I8e2d984d85b355d88edfb9c90c159c8aa0a5362d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extended the IO descriptors with the ability to group them together in a
parent / child(-ren) relationship. It allows to delay parent completion
until all children are done and enables the children to have additional
context in their completion routines (as opposed to having a single IO
describe all requests).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6ad111dc231813e397697109a333e2a5d7f5941d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's not an error if the NVMe hard drive was formatted to 512 + 8 but
has no protection type, so we will also disable the protection for
NVMoF target.
Change-Id: I07e605cff9545f46c642f7ca783a4727a26abece
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451926
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a Namespace was removed all the field will be zeroed, which
may lead to being divied by zero error when IO is running, especially
with perf tool. The perf tool doesn't add hogplug support, so
we add the additional check here to avoid such issue.
Fix issues #728 and #629.
Change-Id: I0e387c8c1bd4f3d40130377e2e0f5143f43be6a3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451762
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do technically support initiators without eventq or
controlq, but the lun hotplug/hotremove path expected the
eventq to be always present.
This was causing vhost to randomly crash in the fuzz tests.
Specifically, the crash happened if lun hotplug was handled
while a VM was in the middle of switching from BIOS to OS.
We fix it by checking if eventq is set before putting
any event there. LUN hotplug and hotremove won't work
without an eventq, but the entire session will be restarted
after new queues are initialized. This will make the VM
retrieve all up-to-date luns after OS initialization is
complete.
Change-Id: I5d28cbedad8fb2a35ede5a491aeb7fdc52faad06
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_malloc() is not required here, as the session
array is nether DMA-able nor shared between processes.
Change-Id: Ia9218d00eea8a3207abf07c1d78eaa585ffcad2c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
logical_block_size and geometry_logical_block_size are uint32_t,
so correct conversion for endianness is used now.
Change-Id: Iaa5ff576da8bc4ca65fa21f28eb3afd30507b00a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We were setting this value in the target from our initiator, but it
turns out the rdma_conn_params struct is responsible for setting the
opposite side so we need to add it in the target side when accepting
connections.
Also, add a test to demonstrate target functionality when we overwhelm
the SRQ. It is useful to note that performance really tanks when you
start overwhelming the srq so it may be useful to use this test case to
check performance gains in edge cases over time.
Change-Id: Iac541bd9fc1d82eca9f21e7abc3f625663a6c460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Before enabling SPDK thread scheduler,
each POSIX thread name was reactor_% (% was the core number).
After enabling SPDK thread scheduler, the name of the master POSIX
thread is reactor_% (% is the max core number), and the name of the
slave posix threads are lcore-slave-% (% is the current core number).
SPDK threads are light-weight threads - sometimes also called
green threads or fibers, and so are independent from posix
threads.
But reactor is tied to the POSIX thread in the SPDK event library.
So SPDK thread doesn't rename the POSIX thread at its creation
but reactor renames the POSIX thread at start instead.
This change makes POSIX thread name compatible between before and
after enabling SPDK thread scheduler.
Change-Id: I26e8dabc73e163c9f74e18b3640cf54954603b1f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451712
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be used in next patch to ensure synchronous
threads wait until any background operations are done
before freeing its request memory, and also to print
errors if internal channels have outstanding
requests when freed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24bc8096f84b70270f87b051f9034ed08e639500
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451780
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All error paths must free opts->nodebase and opts->authfile.
Change-Id: I655f112dd36bbd0dca6050bc5cc3ade1a5b05b7d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow users to optionally specify an affinity mask when
creating a thread. This isn't currently used, but we want
the API to be in its final form for the next release.
Change-Id: I7bd05e921ece6d8d5f61775bd14286f6a58f267f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For bdevs that don't support zero copy, emulate the
API using regular read and write operations.
Change-Id: Iabd7ff474bf740b096f38bd47196987cbd89e915
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a ZCOPY operation to obtain buffers that represent
data regions on the backing block device.
Change-Id: Ie941c16ee051d0009e3888b52b8f41773bba47b3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/386166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the use of spdk_uuid_compare() to be consistent in the file,
also change the SPDK_INFOLOG to SPDK_DEBUGLOG to avoid the
repeated log messages for RESERVATION CONFLICT response.
Change-Id: I72fefbd520cefcaf25182c3ca3d21e3d87d17e94
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now Host can get an asynchronous event notification when
registrants were unregistered/preempted or reservation was
released from the associate namespace, Host can send
get log page to clear related log pages and reservation
report to get the full overview of current reservation
configuration.
Change-Id: Idc57c19812490c7536503308989871515e9f2361
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The mode of dmb oshld can guarantees cpu sequential execution,
which has less impact on performance.
Change-Id: If30b6a682a2216eecd1da039267ed4f5471afc38
Signed-off-by: h00448672 <heyang18@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, when creating a snapshot in blobstore the snapshot's cluster map
was copied from the "original" blob, with the original's map zeroed. These
operations are both O(num_clusters*cluster_size/page_size) while io
operations are frozen. This change replaces the linear operation with an
O(1) pointer swap at the critical moment that io is frozen, while
doing the zeroing before the freeze when preparing the snapshot to
minimize freeze time.
Change-Id: I1e468bc97623f5da161a8ddba1393c271acd3aed
Signed-off-by: Amir More <habeanf@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451486
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the end of the patch series. After this patch,
delete_target_node RPC will wait for the completion of
removal of the SCSI device and then free the iSCSI target.
SCSI device holds passed callback and calls it in free_dev().
free_dev() is ensured to be called after all iSCSI sessions
are closed. So iSCSI target resource can be freed safely
after that.
Change-Id: I25921b4014207092b7b3845dfeae58bcdffa2edc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_malloc() is not required here, as the device
object is neither DMA-able nor shared between processes.
The device structures used to be aligned to cache line
size, but that's just a leftover from before sessions
were introduced. The device object is just a generic
device information that can be accessed from any thread
holding the proper mutex. The hot data used in the I/O
path sits in the session structure, which is now allocated
with posix_memalloc() to ensure proper alignment.
Vhost NVMe is an exception, as the device struct is used
as hot I/O data for the one and only session it supports,
so it's also allocated with posix_memalloc().
While here, also allocate various vhost buffers using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic7f63185639b7b98dc1ef756166c826a0af87b44
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
They used to be allocated with spdk_dma_zmalloc() which did
provide zeroed memory, but we unintentionally changed that
when switching to posix_memalign.
The structure might have some unitialized memory, so with
this patch we just memset it right after allocating it.
Change-Id: Id5a5685e09419901513925abaeed605c36f5199a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
blob_delete_cb() takes spdk_fs_request as the input
parameter.
Change-Id: Ie6150e7d31d187296a448e82784e2ac2fecfe52c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
