Following discussion in a recent SPDK community meeting,
it was determined that we no longer need to carry ISA-L as
a user configuration option. It will be enabled by default.
If running on an architecture that ISA-L isn't fully supported
on, the configure script will disable associated features and
display a warning and will also not build ISA-L. Same case if
there are issues with dependencies.
Note that --without-isal is no longer supported as a configure
option.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ibd1e5e9454d1b090462c3e757b2f51c52e6cb774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14393
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When doing live migration, there are some spdk_nvmf_ctrlr internal
data structures which need to be saved/restored, these data
structures are designed only for vfio-user transport, for
the purpose to extend them to support other vendor
specific transports, here we move them as public APIs,
users can use SAVE|RESTORE to restore a new nvmf controller
based on original one.
And remove the register from vfio-user transport, these registers
are stored in the common nvmf library.
Change-Id: I9f5847ef427f7064f8e16adcc963dc6b4a35f235
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11059
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test is static in nature and not dependent on actual nvmf setup
that comes from the CI - everything is driven via a static json config
that comes with the test itself.
Instead, keep fuzzing directly in autotest.sh, under a top dedicated
test flag SPDK_TEST_FUZZER - this should allow users to run only
fuzzing part without touching the majority of the nvmf suite.
Change-Id: I9c33c46e05f7c4b977b041673fe200d9d2989265
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Both tests sma/vhost_blk.sh and sma/vfiouser_qemu.sh
use two spaces indention for JSON
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I59aedabe40852d45a606c82a875a49a182137f91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14293
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I72c1340d927101d171509b1a42c4f14c0f7dc3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13998
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The test uses bdev_crypto and vfiouser devices to verify that
volumes with crypto parameters are correctly attached
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I9abed43f3df803870af11d7f28601f5f9390474c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I55d58a5959d5b67d99c2e2dfd9ea787a1e31b023
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The test uses bdev_crypto and NVMe/TCP devices to verify that volumes
with crypto parameters are correctly attached and any errors are handled
as intended.
It starts up two spdk_tgt processes, one is being orchestrated by SMA
and the other one acts as an NVMe-oF target. This ensures that we can
verify that SMA terminates discovery service connections whenever a
failure occurs during crypto setup.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74001c256d4a05d2d8d295fb6fd8375d30ab66a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I25cff079e021418ec66c6d04cfd5a3daf969ed77
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14154
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch defines the interface for crypto engines, which provide
support for configuring crypto on a given volume. Only a single crypto
engine can be active at a time and it's selected in the "crypto" section
of the config file. Similarly to device managers, external crypto
engines can be loaded from plugins.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id942ef876e070816827d7ad1937eb510a85c8f8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
For most of apps, -o is for "io size in bytes",
-s("io size in bytes") was changed to -o a long time ago.
-s is now for "memory size in MB for DPDK".
Change-Id: I0977d4a7bc30a4f2e135707ff6e77b6254240fb9
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14533
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently we use 5 seconds as a timeout inside rpc_cmd's
"while read" loop, which is enough for a system with
a single NVMe. That value is insufficient for machines
with more devices and causes the timeout, erroring out
the tests (verified with the same number of devices,
as in the CI node with the most NVMes available - 4).
For that reason increase the read timeout to 15 seconds.
Fixes#2641
Change-Id: If7e9fd169a75ea16ec243c63821a4e5d70995063
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We do not need to force usage of 4096MB of memory for these
tests. Let's just remove how that is being forced.
This allows us to also remove the setup.sh call from
the spdkcli test common.sh script. Its only purpose
was to increase the amount of memory allocated to satisfy
the spdkcli tests, but now that the spdkcli tests aren't
forcing so much memory to be allocated, we can remove
that too.
Fixes issue #2694.
Note: these limits were in the original commit for the
test scripts - 7e8206c - but it is not clear why they
were added instead of just relying on DPDK dynamic
memory allocation..
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2210765e69117205a039aa6bc468efa5d5d537cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14520
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For vfio-user tests, SPDK NVMeoF target uses "0xF"
as the core mask, so we should avoid to use these
cores when starting VMs.
Fix issue #2600.
Change-Id: I1927cd70670b30d59944d5571bcfc37c9e7e35d6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fix mkfs fail when using lvol as backend of nbd.Predefined
NBD_FLAG_SEND_FLUSH and NBD_FLAG_SEND_TRIM are defined by default,
so the operations of trim and flush are supported,but in fact lvol
doesn't support trim and flush operations.Therefore add judgement for
NBD_FLAG_SEND_FLUSH and NBD_FLAG_SEND_TRIM to check.
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: I3d21034d12a038c8fc694d3383028103239ea6bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Each VM will be placed under dedicated cgroup pinned to proper set of
cpus and mem nodes as defined in the provided configuration.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id5d284ee9cbde541b8344ab38c3f77aa5430b1b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13704
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I6b6baae849a472599adc36a04d268a7a65979b41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
state change function do not need to use swtich to do some work.
Do memset in state machine.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie66454d8f31860f403171f20858a6b4a24e3c76f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14502
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
The new API will be used in the next patch
to prevent calling metods for the seconds time
when subsystem is initialized with config file
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I60ac8196e46ccb3b22b3af0607e1ba35a11a66a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14406
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Two functions have been added to implement bdev io type
SEEK_DATA and SEEK_HOLE. Blob functions to find next
[un]allocated io_unit are used
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: Ic3be3c0c86bd3010a23ba2681f0f00c62abcaaba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These functions start from a given offset and seek for next
data or for next hole. For bdevs that do not support seeking,
it is assumed that only data and no holes are present
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I6bc831970223333b25683f60ce3fcbbfebb5bb81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
These functions start from a given offset and seek for first
io_unit belonging to an allocated cluster or first io_unit
belonging to an unallocated cluster
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I0c632e2b3dfd2e96aa22e21796e25a36f2f55f9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also give an error log when the g_timeout_in_sec parameter
isn't set but g_abort is set.
Fix issue #2643.
Change-Id: Iafd9e94952319b89891e37bc6e9e0db6892ddd7d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The failed stack:
The calling processes:
spdk_nvme_detach_async->nvme_ctrlr_detach_async->
nvme_ctrlr_get_ref_count->nvme_ctrlr_proc_put_ref->
nvme_ctrlr_remove_inactive_proc->nvme_ctrlr_get_current_process->
nvme_ctrlr_remove_process
The proc->active_reqs list processing steps:
spdk_nvme_ctrlr_process_admin_completions->
spdk_nvme_qpair_process_completions->
nvme_transport_qpair_process_completions->
nvme_pcie_qpair_process_completions->
*nvme_pcie_qpair_complete_tracker
*nvme_pcie_qpair_insert_pending_admin_request
and
*nvme_pcie_qpair_complete_pending_admin_request
Issue assert:
assert(STAILQ_EMPTY(&proc->active_reqs));
The assert means there are outstanding active requests in
proc->active_reqs list.
According the test app's coding style, it needs to foreach the dev and
complete the outstanding commands before spdk_nvme_detach_async
especially it launched spdk_nvme_ctrlr_register_aer_callback .
Bring the aer tests back, to check it.
Fixes issue #2674.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic0d3946f8c8743155cf3067aea1c9b4676748d2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Adds ability to send trim commands to FTL - only 4MiB aligned requests (both
for offset and length of request) will be processed. During a trim
operation an L2P page (containing 1024 4B entries, 1 per user LBA; which
is where the 4MiB alignment comes from) will be marked as unmapped.
After this point any L2P access to that page will actually set the
entries themselves as FTL_ADDR_INVALID. This is done to make the trim as
fast as possible, since for large requests it's probable that most of
the L2P pages aren't actually in DRAM.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4a04ee9498a2a6939af31b06f2e45d2b7cccbf19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add additional tests checking against dirty shutdown recovery. Also adds
'write after write' test - checking if two simultaneous writes to the
same LBAs return the same data before and after dirty shutdown.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Idcf9b51d9c00d0d065f7e9655387668f5eeb646d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13376
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changing tests to using spdk_dd instead of using mounted nbd and dd on
it. Should be faster.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I17ffeae8441ba37d8e3348c715889fb568e8cd88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do not support dynamic memory allocation with the virtio-user
library - it results in SET_MEM_TABLE vhost messages for every
change which is not supported by the vhost target.
Add '-s 256' to vhost fuzz script, to ensure it does not
violate the new restriction.
This is a follow-on patch for issue #2596.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If851f53d7d670ac8443f0d9c8f4e3cbe82e0df7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14249
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use waitforserial_disconnect to wait for all nvme disconnect operations
to actually finish.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I91f410d9a84db33cf5d8e9d7ecdd4e7a7003aae0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These checked parameters are necessary themselves even for single path
configuration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie1eb2f51eeec1dbc634c6bae462a41d4c209d6ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Community-CI: Mellanox Build Bot
Since commit: eaebf84102
rpc_py is defined in autotest_common.sh.
To avoid overriding the variable, move its declaration
below source commands.
Change-Id: I4f4e59120d4202c00a9fd2c685f3bf4febae48a5
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to have a bigger picture on the state of the
system (especially the phy nodes) when the autotest suite fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ib6e0b740b616284bda48ed82d92ac32236acaa3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since base device doesn't require VSS, FTL introduces a mechanism that
will allow for recovering both the P2L and write pointer of open bands
after a dirty shutdown. After writing 1MiB of data to a band, a 4KiB
block describing the P2L will be persisted to cache device, effectively
emulating VSS for the base device.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ic6be52dc09b237297a5cda3e752d6c038e98b70e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13367
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Track the relative sequence of opening and closing bands and chunks.
Necessary for detecting the most recent user data during dirty shutdown recovery.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I682030e58284d7b090667e4e5a9f4bbc7615708a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rpc_cmd function does not tolerate piping arguments into it,
so code execution skips the parts responsible for generating
a return code. The code is equal to nothing or "", which then
is compared with a value, ultimately erroring out the whole test.
To avoid these problems restore rpc_py varible declaration
in multiconnection.sh and ext4test.sh scripts.
Additionally added a comment in compress.sh to match ext4test.sh
and multiconnection.sh.
Change-Id: I4fb5f737d4e97d602f522b810363bc0d4522bf0d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The word engine was both used (interchangeably with module) to refer to
the things that plug into the framework and to the framework itself.
This patch eliminates all use of the word engine that meant the
framework. It leaves uses of the word that meant "module".
Change-Id: I6b9b50e2f045ac39f2a74d0152ee8d6269be4bd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
For non-fabric controllers, the corresponding I/O qpairs are simply
re-enabled at controller reset.
This had a issue when I/O qpairs span multiple threads and poll group
is used.
spdk_nvme_ctrlr_reconnect_poll_async() calls
nvme_transport_ctrlr_connect_qpair() with qpair->async being false.
Then nvme_transport_ctrlr_connect_qpair() calls
spdk_nvme_poll_group_process_completions() until the qpair is connected.
spdk_nvme_poll_group_process_completions() may poll other qpairs.
This may cause I/O to complete on a wrong thread.
For PCIe controller, spdk_nvme_poll_group_process_completions() calls
spdk_nvme_qpair_process_completions() simply for each qpair.
Hence change nvme_transport_ctrlr_connect_qpair() to call
spdk_nvme_qpair_process_completions() if the controller is non-fabrics.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ieb270c2fb154124021ef6d25577b817d05e5ca9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14295
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There's no reason for this parameter to be non-const and it makes this
functions pain to use when you want to hardcode a specific sock
implementation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifed4426a02ab54cbd51c8a2051b1eac010f86db9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the being disconnected qpair is the last of a poller of a poll group,
CQ is destroyed and the poller is released before the qpair is actually
disconnected.
This patch destroy CQ and release the poller after the qpair is actually
disconnected.
One exception is when spdk_nvme_ctrlr_free_io_qpair() is called to a
connected qpair. In this case, the qpair is removed from a poll group
before the qpair is actually disconnected. In this case, destroy CQ and
release the poller when the qpair is removed from the poll group.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Idf266bbb6dbb40f04ae6313db724fabf80865763
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additional tests testing clean shutdown/startup capability (both fast
and slow shutdown paths). Additionally FIO tests can now run on the same
FTL instance, instead of creating a new one for each test.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I20cbd2fe0303b3e75bf7efca1623e223e2611f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds necessary functions for setting up the state of FTL components
based on loaded in metadata.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I3a4c05230c877850e61d4f31d495d38121d27b3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13362
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
L2P cache allows for partial storing of L2P in memory, paging in and out
as necessary, lowering the total memory consumption.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I727fec9d2f0ade4ca73e872d62a2ec10cfdb0a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13353
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
